|
| 1 | 11 Mtr. Long ST Pole (SP-55)(Bottom Portion Galvanized) |
| 2 | 11 KV Outgoing for O/G. CTR 200/100/5A, 350 MVA (1250 Amp.) |
| 3 | 11 KV Cable Jointing Kit I/D. & O/D. 3x120 Sqmm. |
| 4 | 11 KV XLPE Cable 3x120 Sq.mm. |
| 5 | 11 KV VCB I/C. CTR 600/300/5A, 350 MVA, 24 Volt (1250 Amp.) |
| 6 | 11 KV XLPE Cable 3x300 Sqmm. |
| 7 | 11 KV Cable Jointing Kit 3x300 Sqmm. I/D. |
| 8 | 11 KV Cable Jointing Kit 3x300 Sqmm. O/D. |
| 9 | ACSR Ins. Weasel conductor for jumpering |
| 10 | ACSR Weasel conductor for hanging XLPE Cable |
| 11 | ACSR Dog conductor |
| 12 | 11 KV Pin Insulator |
| 13 | 11 KV Pin with Nut |
| 14 | F Bracket |
| 15 | G.I. Pipe 4\"/6\" dia |
| 16 | 11 KV M.S. Angle 65x65x6x2700mm. Bracing set with 4 No. clamp |
| 17 | M.S. Top Channel (125x65x2240mm) |
| 18 | M.S. Top Channel (100x50x2240mm) |
| 19 | M.S. Dropper Channel (100x50x2028mm) |
| 20 | M.S. Tee Channel |
| 21 | M.S. Base Angle (75x75x6x2028mm) |
| 22 | V-type Cross arm M.S. Angle 65x65x6mm |
| 23 | 11 KV Pin Insulator with Pin |
| 24 | 11 KV Disc. Insulator B&S Type |
| 25 | 11 KV Disc. Fitting |
| 26 | 11 KV Disc. Insulator with Fitting |
| 27 | M.S. Holding clamp with Nut & Bolts |
| 28 | P.G. Clamp |
| 29 | Clamp for Tee Channel |
| 30 | Clamp for Guarding Angle |
| 31 | Cross arm holding clamp |
| 32 | Clamp for G.I. Pipe |
| 33 | Al. Lug 150 Sqmm. |
| 34 | Danger Boared Complete |
| 35 | Danger Board with clamp |
| 36 | Barbed wire |
| 37 | Number Plate with clamp and Nut & Bolt |
| 38 | MS Bolt, Nut & Washer |
| 39 | Stone Pad |
| 40 | Concreting of Pole |
| 41 | Earthing Complete by MS Earth Rod |
| 42 | Painting of Pole with Red Oxide |
| 43 | Stay Complete |
| 44 | Concreting of Stay |
| 45 | Delta Earthing for 11 KV I/C. & O/G. VCB Panel |
| 46 | HDPE Pipe, 160mm PN-6 (160 mm dia) with clamp (600x2 = 1200 Mtr.) |
| 47 | Laying of 160 mm PN-6 Grade UV stabilized HDPE Pipe underground through HDD method 1/1.50 Mtr. below surface for double Ckt. length of 3x120 Sq. mm. 11 KV XLPE Cable. |
| 48 | Laying of 11 KV, 3x120 XLPE Cable in HDPE Pipe, G.I. Pipe & Air on Double Pole Structure & filling of cable jointing kit with proper dressing. |
| 49 | Guarding Angle (65x65x6mm/1.6 Mtr. Long) 5.8 Kg/M = 9.28 Kg. |
| 50 | Eye Bolt for Guard wires |
| 51 | G.I. Wire 6 SWG and 10 SWG for guarding, lacing and street light cable catenary |
| 52 | Extra for Stay at angle location |
| 53 | Al. Binding wire 6 SWG |
| 54 | Al. Tape |
| 55 | 11 KV Pilfer proof metering cubical |
| 56 | 11 KV Pole mounting metering unit (CT & PT) |
| 57 | Ladder for cable Rising at Power T/F. |
| 58 | Road/Communication lines/11 KV Lines crossing |
