Repair and beautification of Green belt/ Road Berm in Sector-8,9 and 10 Ambala ( Repair of brick toe wall , Providing and fixing of grill fencing on brick toe wall, P and F of open gym equipments, benches and children playing equipments and supply of specimen plants. with three year mtc and defect liabilty period free of cost -- 1 [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate] 2 [11.68.3]Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works [Through Rate] 3 [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate] 4 [11.93.1]Finishing walls with water proofing cement paint of required shade : 1. New work (Two or more coats applied @ 3.84 kg/10 sqm) [Through Rate] 5 [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate] 6 [26.18]Supply and planting of disease free healthy , vigorous growing more than 75 cmheight permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 mlchlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker. [Through Rate] 7 [26.20]Supply and Planting rare andspecimen tree plants in already prepared pits(Ficus starlight 150 cm height , Terminalia 210 cm height, menatalis , Michelia champaca hybrid more than 180 cm height, Cyprus (Golden juniperous ) more than 180 cm height,topiary of 10 to 12 no. well trimmed bolls of more than 30cm size of Ficus nuda, Ficus retusa, Ficus long island , Ficus panda more than 180 cm height, Golden bottle brush , casurina equistefolia , Bottle palm with stem circumference atbase more than 40cm ,Washingtonia palm ofhealthy clear stem height below leaf more Thant 90 cm ) including , fertilizer and insecticides chlorpyriphos 20 ml per pit, planting of 180cm to 210cm tall sapling in position and flooding with water .specie of plant will be decided by engineer in charge. [Through Rate] 8 [26.56]Providing and fixing of Haridwar Pebbles( White river stonesize of 2` to 2.50`dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc. as per direction of office in charge. [Through Rate] 9 [26.58.1]Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate] 10 [26.76]Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. [Through Rate] 11 [5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar [Through Rate] 12 [6.14.2]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate] 13 [6.29.3]Centering and shuttering including strutting, propping etc. and removal of form work for : 3. Columns, piers, abutments, pillars, posts and struts [Through Rate] 14 [6.8.2]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 2. 40mm thick [Through Rate] 15 [7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand) [Through Rate] 16 providing and fixing of wicket gates with brick and RCC pillars having minimum weight of gate 65 kg including painting two coats, distempering of pillars complete in all respect and to the entire satisfaction of Engineer in Charge as per design and drawing 17 Providing and fixing of Children playing Equipment`s i.e Four Seater See Saw dimension 9`- 1O` (length) 1 `-7` (Width) 1 `-8` height made of LLD PE sheets 04 nos. pastis ball 04 Nos., GI poles, J 14 mm with 3.2 mm thickness, 25mm bearings used galvanized pipe and further pipe and further powder coated and make a structure and LLDPE plastic granules, which area further rotomolded to form plastic seats. These high grade plastic components arc not toxic, antistatic, fire retardant and the colors are UV stabilized, no sharp corner and rough surface in metal parts •which are used as per Indian Standard to make this SEE Saw including loading unloading, carriage, fixing charges etc. complete in all respect and to the entire satisfaction of Engineer-in charge 18 Providing and fixing of various types of GYM Equipments i.e. AIR WALKER, KNEE CHAIR, ARM SHOULDER WHEEL, TWISTER, CYCLING, HYPER EXTENSION, CHEST SHAPER/SEATED CHEST PRESS as per complete specification already/allotted by the chief Engineer HSVP Panchkula vide his letter no. 63689 dated 13.05.2020
