|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix). |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge:15 mm to 40 mm nominal bore |
| 5 | Dismantling of flushing cistern of all types (C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lea |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) (crushed) |
| 7 | Providing and laying Vitrified tiles in floor with different sizes 600x600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Double Charge |
| 8 | Providing and fixing Ist quality Himchali wall tiles(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge,over 12 mm thick Plaster of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 ( 1 cement : 6 fine sand ) |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : |
| 11 | 15mm dia (external work) |
| 12 | 20mm dia(external work) |
| 13 | Union 20 mm |
| 14 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 16 | Providing and fixing Stainless Steel A ISI304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32mm dia |
| 18 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White |
| 19 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 20 | Providing and fixing in position sanitary and plumbing items ….. Complete job including costs and carriages of all materials involved of superior and approved make (Jaquar,Cera,Parryware,supreme,astral) as approved and directed by EIC. |
| 21 | Washbasin with pedestal Code CNS-WHT-811 Wall hung Basin &CNS-WHT-301Pedestal |
| 22 | Western Single Piece W.C. with PP Soft close slim Seat cover ,Hinges,Dual flush cistern CONTINENTAL code CNS-WHT-853P180SPPSM |
| 23 | Jaquar Single lever Basin Mixer- LYRIC Code: LYR-338051B |
| 24 | Jaquar Soap Dish Holder - Chrome Code: AKP-CHR-35731P |
| 25 | PVC connection 18 \"\" Heavy duty |
| 26 | C.P. Grating |
| 27 | Jaquar (ACN-1121N) Towel Ring Square |
| 28 | Jaquar Bib Cock with Wall Flange Range: Lyric Code: LYR-CHR-38037 |
| 29 | Jaquar Square Shape Maze Overhead Shower -Chrome OHS-CHR-1619 200X200mm Square Shape |
| 30 | Providing and fixing in position sanitary and plumbing items ….. Complete job including costs and carriages of all materials involved of superior and approved make (Jaquar,Cera,Parryware,supreme,astral) as approved and directed by EIC. |
| 31 | Jaquar Shower Arm600X25X25mm Square Shape SHA-CHR-455L600 |
| 32 | CP Nipple |
| 33 | Jaquar Angular Stop Cock (Angle Valve) Range: Lyric Code: LYR-CHR-38053 |
| 34 | Jaquar Sink Mixer with Wall mounted model Range: Lyric Code: LYR-CHR-38347S |
| 35 | JAQUAR Health Faucet ALD CHR 565, 1 m Easy Flex Tube and Hooks, Polished, Plastic, Chrome Finish |
| 36 | Waste coupling 32mm Size Half Thread with 130mm Height Range:Allied Code:ALD-CHR-709L130 |
| 37 | Jaquar Soap Dispenser AKP-35735P |
| 38 | Jaquar Tumbler Holder AKP-37741P |
| 39 | Jaquar W.C.Brush Holder AKP-35743P |
| 40 | Providing and fixing in position sanitary and plumbing items ….. Complete job including costs and carriages of all materials involved of superior and approved make (Jaquar,Cera,Parryware,supreme,astral) as approved and directed by EIC. |
| 41 | Jaquar Glass Shelf 600mm long AKP-35771P |
| 42 | Jaquar Towel Rail 600mm long AKP-35771P |
| 43 | Jaquar Toilet Roll Holder with Shelf AKP-35757P |
| 44 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Salwood |
| 45 | Basement |
| 46 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).Including all cost of material and carriages complete. |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm thick) |
| 48 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :Second class deodar wood. Take qty @ 95% |
| 49 | Providing and fixing aluminum die cast body tubular type universal hydraulicdoor closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessoriesand screws etc. complete.Including all cost of material and carriages complete. |
| 50 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts andscrews etc. complete :250 x 16 mm |
| 51 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : |
| 52 | 250x10 mm |
| 53 | 100x10 mm |
| 54 | Providing and fixing Aluminium hanging floordoor stopperISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screwsetc. complete twin rubber stopper. |
| 55 | Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete. |
| 56 | 125mm |
| 57 | 100mm |
| 58 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. : 2 mm thick |
| 59 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 60 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. (Brand : Nerolac Excel/Berger Champ/Asian Apex or equivalent). |
| 61 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 62 | Finishing walls with Acrylic smooth exterior paint of required shade:Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 63 | Providing Grinder with operator for Removing dry or oil bound distemper, water proofing cement paint/primer from walls and the like including scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Take Qty @ 30% |
| 64 | Applying priming coatWith ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood). |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 66 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on old work |
| 67 | Steel work in built up tubular (round, square or rectangularhollowtubesetc.)trussesetc.,including cutting,hoisting,fixinginpositionandapplyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes Stair@ 2.5kg/sft |
| 68 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 69 | Providing and fixing on wall face un-plasticized Rigid PVC rainwater pipes conforming to IS: 13592 Type A including jointingwith seal ring conforming to IS: 5382 leaving 10 mm gap forthermal expansion. (i) Single socketed pipes 110 mm diametre 110 mm. |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 71 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 38mm of 83 mm length and 77 mm breadthweighing not less than 60gms. |
| 72 | Providing and fixing PTMT Waste Pipefor wash basin and sink, of approved quality and colour: Flexible pipe 32 mm dia |
| 73 | Providing and fixing Ball Valve 20 mm |
| 74 | Providing and fixing Ball Valve 25 mm |
| 75 | Providing and fixing TANK NIPPLE |
| 76 | Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) |
| 77 | With float glass panes of f 8 mm thickness (weight not less than 20.0 kg / sqm) |
| 78 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 79 | Engagement of skilled/unskilled manpower for various works like , Drain clearance.Shifting of old furniture, Cleaning of Manholes,Old Furniture Repair etc. |
| 80 | Labour( basic rate 553+18%Gst+15%CP+2% tax) |
| 81 | carpenter( basic rate 806+18%Gst+15%CP+2% tax) |
| 82 | Plumber ( basic rate 806+18%Gst+15%CP+2% tax) |
| 83 | Providing and applying plaster of paris moulding of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 84 | Repair of sofas by way of removing Existing/damaged upholstery from seat and back rest and replace it with new one, including the replacement of damaged part in wood structure and providing/fixing of new arm rests wherever required including cost of wood/foam/fabric (full upholstery) etc., changing metal springs in base/seating if required, providing/fixing of seating/backrest cushion of polyurethane foam of high quality with its upholstery, nails, fevicol, ply and along with all fittings including carpenter/helper/labour for shifting of furniture to working space as provided by intending department and re-fixing of same after repairing etc.complete job in all respects.as approved by Engineer in charge. Density of Cushion/foam of Backrest and Seat Material +-3(Kg/Cubic M)=45, Seat Cushion Thickness ±3 (mm) =125 , Backrest Cushion Thickness ±3 (mm) 75, Thickness of Foam/Rubber in arms ±2 (mm) = 50Thickness of Foam/Rubber in back ±2 (mm)= 75, Thickness of Foam/Rubber in front ±2 (mm) 25, Thickness of Foam/Rubber in sides ±2 (mm)=20, Type and colour of fabric = Leatherette/Velvet/Suedeas approved by Engineer-in-Charge. Make of Foam : Sleepwell /kurl-on /Nindiya as approved by Engineer-in-charge. : Three(03)seater Sofas=02 no.s |
| 85 | Repair of sofas by way of removing Existing/damaged upholstery from seat and back rest and replace it with new one, including the replacement of damaged part in wood structure and providing/fixing of new arm rests wherever required including cost of wood/foam/fabric (full upholstery) etc., changing metal springs in base/seating if required, providing/fixing of seating/backrest cushion of polyurethane foam of high quality with its upholstery, nails, fevicol, ply and along with all fittings including carpenter/helper/labour for shifting of furniture to working space as provided by intending department and re-fixing of same after repairing etc.complete job in all respects.as approved by Engineer in charge. Density of Cushion/foam of Backrest and Seat Material +-3(Kg/Cubic M)=45, Seat Cushion Thickness ±3 (mm) =125 , Backrest Cushion Thickness ±3 (mm) 75, Thickness of Foam/Rubber in arms ±2 (mm) = 50Thickness of Foam/Rubber in back ±2 (mm)= 75, Thickness of Foam/Rubber in front ±2 (mm) 25, Thickness of Foam/Rubber in sides ±2 (mm)=20, Type and colour of fabric = Leatherette/Velvet/Suedeas approved by Engineer-in-Charge.Make of Foam : Sleepwell /kurl-on /Nindiya as approved by Engineer-in-charge. : Two (02)seater Sofas=08 no.s |
| 86 | Repairing of Visitor Chair by way of repairing arm rests etc. including replacement/repairing of damaged hardware/parts, nylon castor wheels,etc. replacement of damaged fabric ,Polishto be walnut finish with sealer as per approved samplescomplete job along with all fittings including carpenter/fitter/helper/labour for shifting of furniture to Working space as provided by intending department and re-fixing of same after repairing etc. complete job in all respects.as approved by Engineer in charge. |
| 87 | Carriage of material by mechanical transportation. |
| 88 | Sandaverage lead 20 by MT & head load 300 Mtr. |
| 89 | Stone agrigate below40mm. Average Lead 20 KmBy mechenical means & head load 300 Mtr. |
| 90 | Disposal of Mulba av lead 2 km BY MT& head load 300 Mtr |
