|
| 1 | Dismantling of floor hearth or wall tiling/ stone slab incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 2 | M&L for non skid ceramic tiles 7-8mm thick coloured (square/ rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 3 | M&L for joint free Non skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/ rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6), complete all as specified and directed. |
| 4 | M&Lfor wall cladding/ wall tiles glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm/ 300x200x6to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles 10mm thick coloured (Square/ rectangular)dark shadejoint free area of each tilesn exc 0.36 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles 10mm thick coloured (Square/ rectangular) dark shade joint free area of each tiles n exc 0.36 sqmin vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 7 | Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed. |
| 8 | Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed. |
| 9 | Taking downshutters of any description exc 1Sqm each complete all as specified and directed and n exc 2Sqm each, complete all as specified and directed. |
| 10 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repair, complete all as specified and directed. |
| 11 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 12 | S&F Aluminium anodised powder coated sliding type two/three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00x31.75x1.3 mm thick for top and sides, bottom and shutter frame 38x18x1.5mm thick, Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc, complete all as specified and directed. |
| 13 | S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, a, complete all as specified and directed.Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 14 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction and making it good to match with existing surface, complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 15 | S&F 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial types on both sidesincl teak wood beading around the shutters, complete all as specified and directed. |
| 16 | S&F glazed and skeleton shutters 35mm thick 2nd class hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. sized of members of shutter with three number of panels, complete all as specified and directed. |
| 17 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading, complete all as specified and directed. |
| 18 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 20 | S&F sheet glass ordinary quality 4mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 21 | S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 22 | M&L for preparation ofnew wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 23 | M&L for preparation ofold wooden surfaces not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 24 | S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed. |
| 25 | S&F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 26 | S&F aluminium extruded alloy handles fabricated type anodised 125mm long, complete all as specified and directed. |
| 27 | S&F aluminium extruded alloy handles fabricated type anodised 100mm long complete all as specified and directed. |
| 28 | S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. |
| 29 | S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21, complete all as specified and directed. |
| 30 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 31 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 32 | S&F in repair floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors, complete all as specified and directed. |
| 33 | Demolition of cement concrete is re-inforced (re-enforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 34 | M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in chajja repairs at any height including providing and erecting at site conventional steel double scaffolding to reachat any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and materials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of proposed work etc, complete all as specified and directed. |
| 35 | M&L for formwork to flat rough finished surface of concrete for chullah hoods, chajjas, troughs and similar items including edges any height complete all as specified and directed. |
| 36 | M&L for reinforced cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in columns/ beams/ slab, landings and in shelves and the like, complete all as specified and directed. |
| 37 | Formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work, complete all as specified and directed. |
| 38 | M&L for form work to edges of concrete flats, openings, floors & roofs and sides of RCC/ PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete, complete all as specified and directed. |
| 39 | S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed. |
| 40 | Demolition of brick or stone masonry built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed. |
| 41 | M&L for brick work with old size kiln burnt sub class \"B\" bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed. |
| 42 | M&L for brick work with sub class \"B\" brick in cement mortar 1:6, straight or curved on plan to anyradiusin half brickthickwallbuilt, complete all as specified and directed. |
| 43 | M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted built in cement mortar 1:6including raking or cutting outjoints, complete all as specified and directed. |
| 44 | Taking down cement or cement lime plaster, of any description incl tiling etc., complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth, complete all as specified and directed. |
| 46 | M&L for rendering work 15mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and fair (without using extra cement) mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type), complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a coat 1-2mm wall of putty on walls, complete all as specified and directed. |
| 48 | M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pilasters and cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) inclwherever required fillings of gaps ,holes, patches with wall care putty of existing surface with sand paper or iron patti/ flat, complete all as specified and directed. |
| 49 | M&L for 3mm thick exterior wall care putty on external wall surface complete all as specified and directed. |
| 50 | M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/Liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building/ tower, complete all as specified and directed. |
| 51 | M&L for preparation of newly plastered surface of wall & applying two coats of cement based paint, complete all as specified and directed. |
| 52 | M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/Liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over old surfaces at any height of building/ tower, complete all as specified and directed. |
| 53 | M&L for preparation of old plastered surface of wall & applying two coats of cement based paint, complete all as specified and directed. |
| 54 | Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. |
| 55 | Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. |
| 56 | M&L for cutting chases, pinning in. making good to facings where required and pointing in CM 1:3, to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 57 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore, complete all as specified and directed. |
| 58 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore, complete all as specified and directed. |
| 59 | S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 60 | S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 61 | S&F 21-22 inch dia galvanised mild steel pan mortar (tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed. |
| 62 | S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed, complete all as specified and directed. |
| 63 | S&F in repair 15 mm dia angle/ stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. |
| 64 | S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 65 | S&F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type fixed, complete all as specified and directed. |
| 66 | S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer/ wall mixer for mixing hot and cold water, complete all as specified and directed. |
| 67 | S&F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing, complete all as specified and directed. |
| 68 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 69 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 70 | S&F in repair 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed. |
| 71 | S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed. |
| 72 | S&F in repair EWC vitreous china wash down water closet pan pedestal pattern white with complete fitting including P Trap/S Trap, jet spray and fixing with brass screw, complete all as specified and directed. |
| 73 | S&F plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed. |
| 74 | S&F in repair vitreous china squatting pan, Orissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc(excluding flushing cistern and flush pipe, complete all as specified and directed. |
| 75 | S&F in repair PVC low level flushing cistern 10Ltr capacity valve less symphonic action type white as approved with ball valve flat back & handle including brackets, complete all as specified and directed. |
| 76 | S&F in repair wash basins, vitreous china (flat back or angle back type) size 550x400mm white, incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length, complete all as specified and directed. |
| 77 | S&F 5mm thick looking mirror with 6mm thick back ply wood and wooden frame complete including plugging on wall and fixed, complete all as specified and directed. |
| 78 | Taking down PVC pipe of any dia and description including all fitting, complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 80 | S&F for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed. |
| 81 | S&F PVC \"P\" or\"S\" traps of 110 mm bore pipe, complete all as specified and directed. |
| 82 | S&F PVC SWR cowl 110 mm bore pipe, complete all as specified and directed. |
| 83 | S&F PVC (SWR) bends any radius 110mm, complete all as specified and directed. |
| 84 | S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 85 | S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius 75 mm dia, complete all as specified and directed. |
| 87 | M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 88 | Dismantling boarding any description, fixed in any position with nails for cupboards, complete all as specified and directed. |
| 89 | S&F prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work and incl beading, complete all as specified and directed. |
| 90 | S&F hasp and staple, safety type, of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified and directed. |
| 91 | S&F continuous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw, complete all as specified and directed. |
| 92 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed. |
| 93 | Dismantling plain orcorrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 94 | S&F pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 95 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 96 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 97 | Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc., complete all as specified and directed. |
| 98 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in sectionin any position with nails etc complete all as specified. |
| 99 | S&F rooftrusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W (Gde-E- 250), quality-A etc., complete all as specified and directed. |
| 100 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of water tanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed. |
| 101 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 102 | M&L for preparation of old steel surface of any description over 10cm in width or girth and applying one coat synthetic enamel paint, complete all as specified and directed. |
| 103 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr, complete all as specified and directed. |
| 104 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 105 | Dismantling of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, cooking platform etc., complete all as specified and directed. |
| 106 | M&L for 18-20mm thick granite (of any type) work table rubbed andpolished) in pillar/vertical surface, cooking platformand like in 15 thick screed bed CM 1:4, including edges of stones slabs one edges such as cooking steps or etc, moulding, pointingin white cement 1:2using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 107 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, over 10mm thick rendering as in CM 1:3, and other similar situations, complete all as specified and directed. |
| 108 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & dado and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete over and including 15 mm thick screed bed or bedding with CM 1:6, etc, complete all as specified and directed.Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular.(ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achieve the desired granite finish. |
| 109 | M&L for machine cut kota stone slab 20-25mm thick inriser steps, skirting, dado, nosing and pillar over 10mm thick cement screed base laid with CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, etc, complete all as specified and directed.Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges/nosing incl holes for pipe all cutting to make it square or rectangular.(ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achieve the desiredfinish. |
| 110 | M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed. |
| 111 | M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, set, jointedand pointed in neat cement slurry with grey cement and pigment in floors laid over 20mm thick screed bed in CM 1:6, complete all as specifiedand directed. |
| 112 | M &L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set, complete all as specified and directed. |
| 113 | M&L for sand filling under floors, below paver blocks or in foundations including watering and consolidation, , complete all as specified and directed. |
| 114 | M&L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection path etc., complete all as specified and directed. |
| 115 | M&L for 40mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in base coarse for floors, complete all as specified and directed. |
| 116 | M&L for mild steel works as in bends straps, hold fasts etc, conforming to IS-206 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed. |
| 117 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finishes &necessary formwork, complete all as specified and directed. |
| 118 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed. |
| 119 | S&F GI Clip-in false ceiling tiles of with beveled edges of with G.I sheet (600mmx600mm) is manufactured out of 0.50mm galvanized steel of 100 gsm/sqmtr sheet having powder coated with 60 microns polyester paint on front side. These tiles shall have beveled edges. Two sides of each tiles are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0.5mm galvanized steel clip-in profiles of size 24mmx34mm of 0.5mm thick and installed at 600mm c/c spacing to support the tiles, clip-in profiles are suspended with hold on clamps. Suspension angles or 4mm GI Wire are suspended from the roof structure. The tiles are held in place by pressure clips. In the flexible system the hanger and suspension clip replace the suspension angle. G.I Edge profile are of size 24x24x0.35mm thick with matching the color with tiles, complete all as specified and directed. |
| 120 | M&L for solid PVC as in use wall/ ceiling lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pe specifications and drawing incl necessary beading work, incl same board beading for joint sealed, complete all as specified and directed. |
| 121 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, complete all as specified and directed. |
| 122 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 500 Ltr nexc. 1000 ltr, complete all as specified and directed. |
| 123 | Complete removal of old roof treatment including cement mortar (except mudfushka, brick tile) andremoval of grass, small trees by picking sweeping, cleaning and washing down with water to remove dust etcincluding removing debris out side MoD land, complete all as specified and directed.Note: Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 124 | M&L for 15 mm thick cement plasterover the concrete / brick roof surfacesin cement mortar 1:4mixed with liquid water proofing compound@ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement, complete all as specified and directed.Note :- i) Water proofing additive shall be measured and paid separately.ii) Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 125 | M&L for applying a priming coat of@ 0.30 Kg/sqm with bituminous primer including preparation of surface, complete all as specified and directed.Note: Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 126 | M&L for applying evenly a tack coat of industrial hot blown grade bitumen 85/25 @ 1.2 kg/sqm including cleaning surfaces over primer, complete all as specified and directed.Note: Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 127 | M&Lfor water proofing treatment of roof with APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) shall be laid with 100mm side lap/ end lap on primed surfaces as per manufacturers instruction, complete all as specified and directed.Note: Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 128 | M&L for applying a coat of heat resisting paint (aluminium bitumen paint) over APP surface, complete all as specified and directed .Note: Work will be executed in bldgs upto 4 story height, necessary T&P is incl in quoted rates. |
| 129 | Supply only Integral waterproofing compound all as specified as per manufacturer\"s instruction, complete all as specified and directed. |
