|
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Demolition of Brickwork or stone/ boulder masonry, built in CMincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 6 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 7 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 8 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed . |
| 9 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and as directed . |
| 11 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 12 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 13 | M&L for cement concrete 25mm thick typeB-0 (1:2:4) using 12.5 mm graded agg as in sub base to receive floor finishes complete all as specified and as directed . |
| 14 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wideover and including 15mm thick cement screed bed in CM 1:6 laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshedpolishing in complete all as specified. |
| 15 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed. |
| 16 | Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed. |
| 17 | M & L,non skid colouredceramictiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified and directed |
| 18 | M & L,glazedcoloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4set & jointed in neat cement slurry & pointed in coloured cement to matchcomplete all as specified and directed. |
| 19 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4complete all as specified and directed. |
| 20 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 21 | Preparation of new plasteredsurfacesand applying two coat of oil bound distemper over and including a chalk whiting on plastered surface achive a smooth finish surface complete all as specified and directed. |
| 22 | Preparation of old plasteredsurfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer chalk whiting on plastered surface to achive smooth finish surface complete all as specified and directed. |
| 23 | Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed |
| 24 | M&L for preparationof new plastered surfaces of wall and applyingtwo coats of cement base paint complete all as specified and directed. |
| 25 | M&L for preparationof oldplastered surfaces of wall and applyingone coats of cement base paint complete all as specified and directed. |
| 26 | S&F in repair 18/19 mm thick prelaminated particle board interior grade ,prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work in cup boards ,rebated or flat ege complete all as specified and directed. |
| 27 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed. |
| 28 | S&F in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size allas specified and directed. |
| 29 | M&L, preparing ofOldwooden surfaceexceeding 10 cm in width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 30 | S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window, ventilator frames/three track shutters sliding/fixed /louvered and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws all as specified and as directed. |
| 31 | Supply and Fixing sheet glass 4 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 32 | Supply and Fixing in repair ot 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 33 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 34 | S&F in repair galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 35 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 36 | S&F, factory made solid panel PVC doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 37 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specificationcomplete all as specified and directed |
| 38 | S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed. |
| 39 | S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,complete all as specified and directed. |
| 40 | S&F in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed. |
| 41 | S&F,aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 42 | Supply & Fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 43 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed. |
| 44 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 45 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 46 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 47 | M&L, preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 48 | Dismantling Asbestos cement (Corrugated semicorrugated ,etc) sheets in roof coverings complete all as specified and as directed . |
| 49 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 50 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 51 | M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceilingcomplete all as specified and as directed. |
| 52 | Dismantling timber scantling 40 sqcm and over in section ,an any position (framed) complete all as specified and as directed . |
| 53 | Taking down of roof trusses, above 4 mtr & up to 8 mtr coupled rafters or trussed beams complete all as specified and as directed . |
| 54 | S&F, rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 55 | S&F for mild steel for roof truses (framed) ,trussed purlins crane gantires ,rails and fasternings and heavy bracket framming (beam tee angle channel or flat sections ) including distance pieces , clats etc and confir to Fe-410-w (GdeE-250) quality A including one shop coat of zinc chrome primer complete all as specified and directed. |
| 56 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed . |
| 57 | Supply & fix purpose made crew bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted withwashers and one hexogonal or square nut 16-20 mm dia and exc. 22cm and nexc. 30 cm long complete all as specified and as directed. |
| 58 | S&F in repairs bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed . |
| 59 | S&F, in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 60 | S&F, in repair, 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed . |
| 61 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 62 | Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern )including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,withPVC cover sheet insame colour etc complete all as specified and directed. |
| 63 | S&F, in repairs, PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed. |
| 64 | Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed. |
| 65 | S&F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC,all as specified and directed. |
| 66 | S&F in repairs Two way bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed . |
| 67 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete. |
| 68 | Dismantling of water tank & n exc 1000 ltr capacity in litres and removing to store complete all as specified and as directed . |
| 69 | Supply & Fix 1000 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 70 | Refixing old serviceable 15 mm GItubing and connection in new or old position (concealed in Wall, ceiling &floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. |
| 71 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where requiredcomplete complete all as specified and directed. |
| 72 | Refixing old serviceable 20 mm GItubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. |
| 73 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed. |
| 74 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed . |
| 75 | Supply & Fix in repair white glazed earthen ware vitreous china wash hand basin of size 550x400 mm with and including CI brackkets ,32mm bore CP waste couplin glintel /out let PVC flixible pipe 600 mm size for 15mm brass nut and washers etccomplete all as specified and directed. |
| 76 | Supply & Fix in repair15 mm diapillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \"Hot or Cold\" with long swan neck swivel typescrewed for iron pipe and fixed complete all as specified and directed. |
| 77 | S&F, Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 78 | S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed. |
| 79 | S&F 5.5mm thickglass cornershelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed. |
| 80 | S&F, 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 81 | S&FAluminium Hat pegs of 6 pegs,solid body 125mm to 175 mmcompleten all as specified and directed. |
| 82 | S&FBrass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 83 | S&F,PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 84 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clampscomplete all as specified and directed. |
| 85 | S&F, in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. |
| 86 | S&F, in repairs,125/110mm bore PVC (SWR) \"P’ trap complete all as specified and directed. |
| 87 | S&F, in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 88 | S&F, in repairs, 110mm bore PVC(SWR)bends any radius,complete all as specified and directed. |
| 89 | S&F, in repairs, 75mm bore PVC(SWR)bends any radius,complete all as specified and directed. |
| 90 | S&F, PVC (SWR) 75 mm dia vent cowl complete all as specified and as directed. |
| 91 | M&L for 18-20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete. |
| 92 | M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) asin plinth protectionfinisheed even and smooth without using extra cement complete. |
| 93 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortarcomplete all as specified and directed. |
| 94 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6(20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 95 | M&L, precast cement concrete Block Masonary with solid blocks (except blocks) type C1, 1:3:6(20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 96 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement workcomplete all as specified and as directed. |
| 97 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 98 | S&F in repair, 20mm dia, Harrison rails ,mild steel ,chromium plated with fixing brackets ,stps ,rollers etccomplete all as specified and directed. |
| 99 | M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed. |
| 100 | Demolition of reinforced cement concrete in any positionnot otherwise specifically providedfor complete all as specified and directed. |
| 101 | M&L for RCC (Nominal Mix)type B0 1:2:4 12.5mm graded aggregate ) as in Beams, cantilevers ,bressummers lintels over 1.5 m spanon walls,beams and columns etc complete all as specified and as directed. |
| 102 | Form work to side and soffits of floor or roof beams , beam haunching, girders bressummers lintels , cantilevers , shelves including sup - ports ,overhangs etc also splays between floors ans beams etc. complete all as specified and directed. |
| 103 | M&L for MS TMT bars10mm dia and over cut to Length bent to shape requiredincluding cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. |
| 104 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 105 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 106 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 107 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 108 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 109 | M&L, preparation old previously treatedsteel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on thesteel surfaces, complete all as specified and directed. |
| 110 | S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed. |
| 111 | S&F, in repair, RCC NP3 150mm diameter Pipes laid and jointed and including concrete bed to drain pipe with under and haunching against the side of pipes after laid and tested in cement mortar 1:4:8 Tyep D-2 complete all as specified and directed. |
| 112 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and directed . |
| 113 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed. |
| 114 | Taking down carefully copper/Aluminium point wiring (Light, fan, socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etcall as specified and directed by Engr-in-charge. |
| 115 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding. |
| 116 | All as per srl item No. 115 here-in-before but for 05 Ampsocket outlet on independent board complete all as specified. |
| 117 | All as per srl item No. 115 here-in-before but for 05 Ampsocket outlet on same board complete all as specified. |
| 118 | All as per srl item No. 115 here-in-before but for 15 Ampindependent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 119 | S&F Switch piano, flush type 5 AmpsOne Way 230 volts complete all as specified. |
| 120 | S&F Socket outlet3 pin 6 Ampsflush type 230 volts complete all as specified. |
| 121 | S&F Socket outlet2-in-1 3 pin 6 & 16 Ampsflush type 230 volts complete all as specified. |
| 122 | S&F Switchone way 15 Ampsflush type 230 volts complete all as specified. |
| 123 | S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified. |
| 124 | S&F LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type4ft with integral LED driver (double side connection) including 18W, T8 tube rod complete all as directed by Engr-In-charge. |
| 125 | S&F DB with metal plug and socket double pole with MCB SP of 20 Amps, 230 V, 10 KA all as specified and as directed by Engineer-in-charge. |
| 126 | S&F Distribution Board VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 100 Amps rating, 25KA breaking capacity for incoming supply and provision of MCB SP/TP for out going supplycomplete all as specified and directed. |
| 127 | S&F Sheet metal enclosure double door for DB\"s SPN 8 way 240 V having200 A rated bus bar complete all as specified and directed by Engr-in-charge. |
| 128 | S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 129 | S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 130 | Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed. |
| 131 | M&L in replacement for Sub main wiring complete with FRLS PVC insulated sheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal)alongwith earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing capingcomplete all as directed by Engr-In-charge. |
| 132 | S&F fan regulator stepped type, electronic, flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engineer-in-Charge. |
| 133 | S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessoriesand connecting up with ceiling rose to fan complete all as specified and as directed. |
| 134 | Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface allas directed by Engineer-in-charge. |
| 135 | Supply and fix of exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.Make : Crompton/Havells/Almonard/Bajaj |
| 136 | Labour only for cutting/opening in stone masonary wall suitable for exhasut fan of 300mm dia and making good the disturbed surface complete all as specified and as directed. |
| 137 | Supply and fix electric water heater, storage type metal body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. |
| 138 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 4mm as earth lead all as specified and testing on completion includingprovisionof earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m. |
| 139 | S&F Wall mounting fan, oscillating type, single phase with speed regulator step type 400 mm sweep, complete all as specified and directed. |
| 140 | S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. |
| 141 | Disconnecting carefully and taking down the existing ceiling fan of any size, and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge |
