Tender For Repair To Mes Installation At Madhopur Under Ge Basoli.; 1 Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc 1.5 Sqmcomplete all as specified and directed. 2 Taking down chowkats or frames with shutters (w/o takingoff shutters from the frame) area exc 1.50 Sqm but n.exc 4.0 Sqm complete all as specified and directed. 3 Taking down shuttersof any description exceeding 1 Sqm and not exc 2 Sqm each complete all as specified and directed. 4 Taking down and refixing incl resecuring and easing shutters areaexceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed. 5 M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed. 6 M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed. 7 M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 8 S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and directed. 9 Supply and fix for natural colour anodised Aluminum Door shutters side hung type with safe bars locking rails locking arrangements with aluminium frame of suitable section and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle etc with and including sheet glass fitted type glazing quality of 4mm thick size of lock rails 44.45x81.50mm side rails 85.85x44.45mm top rail 83.5x44.45mm bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 including fitting arrangements complete all as specified in MES SSR 2010 Part-I and as directed. 10 M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 11 M&L for preparation of woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified and directed. 12 S&F aluminium handle, cast type, anodised,125 mm size complete all as specified and directed. 13 S&F aluminium anodised barrel tower bolt of extruded section 150 mm longcomplete all as specified and directed. 14 S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and directed. 15 S&F aluminium alloy, anodised, sliding door bolt with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. 16 M&L Steel window factory made double shutter and tubular moulded frame of 16gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars) with side hung shutters including projecting type hinges non friction with 3mm thick 100mmlong handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer includingMild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. 17 S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane complete all as specified and directed. 18 S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. 19 S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. 20 S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 21 S&F flush pipe of 32mm dia for low level flushing cistern complete all as specified and directed. 22 S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc complete all as specified and directed. 23 S & F in repair600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 24 Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etccomplete all as specified and directed. 25 M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces then applyingtwo coats cement basepaint on walls over a coat ofprimer complete all as specified and directed. 26 M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion complete all as specified and directed. 27 M&L Preparation of old plastered surfaces and applyingapplying two coat of weather proof Apex paintcomplete all as specified and directed. 28 M&L Rendering 5mm thick in CM 1:3, on ceiling,etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and Preparation of new pastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed. 29 M&L preparation of old surfaces of wall (plastered or unplastered) and applying two coat of cement base paint complete all as specified and directed. 30 M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces ofwall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed. 31 M&L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed 32 M&L coloured chequered cement conrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 75mm thick PCC type C-2 1:3:6, (40mm graded crushed stone aggregate) incl demolition of existing PCC any type and 15mm thick cement screed bed or bedding layer in CM 1:4 complete all as specified and directed. 33 M&L forSand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed. 34 M&L machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed. 35 Materialand labour for plain cement concretetypeB-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, complete all as specified and directed. 36 Dismantling asbestos cement (Corrugated, Semi corrugated, etc) sheets in roof covering complete all as specified and directed. 37 S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 38 S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 39 M&L for Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. 40 S&F in repair galvanisied 2 strand steel barbed wire 2.24mm dia with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails srtaining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staplesor steel pins etc complete all as specified and directed. 41 S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 and applying two coat of synthetic enamel paint over a coat of red oxideincl Dismantling wrought iron or mild steel work of any description complete all as specified and directed. 42 S&F Framed work such as Rafters Purlins, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified anddirected 43 Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 44 M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded crushed stone aggregate) in plinth protection etc laid in alternate bays complete all as specified and directed. 45 M & LBrick work with sub class `B bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed. 46 S & F position suspended false ceiling system using E - grid suspended ceiling gridsystem. The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee25X 24 mm and wall angle 24mmX24mm using 8mm thick ceiling panel laminatedwith PVC film on front face and foil backavailalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and directed. 47 S&F in repairsteel rolling shutters, thickness of laaths 1.25 mmwith out ball bearing, as specifiedincluding top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,in including taking down complete push pull or manual type incl two coats of synthetic enamel Paintcomplete. 48 S & F in repair Ball bearing for rolling shutters complete all as specified and directed 49 M&L For Glazed ceramic colouredtiles in vertical surfaces 450x300X7mm thick set andjointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plasterin C.M 1: 4 complete all as specified and directed 50 Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with grey cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. 51 Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed. 52 M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even and smooth using extra cementcomplete all as specified and directed.
