|
| 1 | M&L Demolition of reinforced cement concrete in any position and of any description not otherwise specifically provided for all as specified and directed by Eng-in-Charge. |
| 2 | M&L Demolition of cement concrete (unreinforceed)of any description and in any position not otherwise specifically provided for all as specified and directed by Eng-in-Charge. |
| 3 | M&L Surface dressing n.exc 15cm deepin hard/densesoil complete all as specified and directed by Eng-in-Charge. |
| 4 | M&L excavation in trenches n. exc. 1.5 M in width and 1.5 M in depth for laying of cables and getting out in soft / loose soil complete all as specified and directed |
| 5 | M&L excavation in trenches n.exc 1.5m wide& n.exc 1.5m depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out inhard/dense soil all as specified and directed by Eng-in-Charge. |
| 6 | M&L excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil. |
| 7 | M&L for Boring for Bored cast in situ piles 10 metres in soil and getting out and disposal of spoil to a distance 50 metres using DMC method (Direct mud circulation) for (300mm dia) pile all as specified and directed by Eng-in-Charge. |
| 8 | Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in hard/dense soil all as specified and directed by Eng-in-Charge. |
| 9 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed all as specified and directed by Eng-in-Charge. |
| 10 | Removing excavated material n. exc. 50 M , depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed . |
| 11 | M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area all as specified and directed by Eng-in-Charge. |
| 12 | M&L for ATT treatment the back fill in contact with foundationat the rate of7.5 litres of emulsion per sqm of vertical surface area all as specified and directed by Eng-in-Charge. |
| 13 | M&L for ATT treatment the top surface of filled earth & under plinth protection at the rate of 5 litres of emulsion per sqm of surface area all as specified and directed by Eng-in-Charge. |
| 14 | M&L for ATT treatment the soil alongwith external perimeter of the buildingat the rate of 2.5 litres of emulsion per Rm of surface areaall as specified directed by Eng-in-Charge. |
| 15 | M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete all as specified and directed by Eng-in-Charge. |
| 16 | M & L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling, mass concrete and on the base of water tank all as specified and directed by Eng-in-Charge. |
| 17 | M&L Plain cement concrete, 1:2:4 type B1 using 20 mm graded stone aggregate in surface channels and drains all as specified and directed by Eng-in-Charge. |
| 18 | M&LPCC 1:3:6 type C-1, using 20mm graded stone aggregate as in coping incl all necessary formwork etc complete. |
| 19 | M&L precast cement concrete, 1:2:4, type B1, using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesetc and set in mortar 1:6 complete |
| 20 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter all as specified and directed by Eng-in-Charge. |
| 21 | M&l Formwork to sides of pillars, posts, struts, piers, columns and stanchions in square, rectangular ,polygonal in shape with fair finished surface of concrete all as specified and directed by Eng-in-Charge. |
| 22 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flatewith fair finished surface all as specified and directed by Eng-in-Charge. |
| 23 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping all as specified and directed by Eng-in-Charge. |
| 24 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concretewalls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with fare finished concrete surface all as specified and directed by Eng-in-Charge. |
| 25 | M&L for RCC design mix grade M-30 grade (20mm graded aggregate) inFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. .All as specified and directed by Eng-in-Charge. |
| 26 | M&L for RCC design mix grade M-30 grade (using 20mm graded stone aggregate) inColumns, pillars, piers, posts and struts etc,.All as specified and directed by Eng-in-Charge. |
| 27 | M&L for RCCdesign mix M-30 grade(using 20mm graded stone aggregate)as Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed by Eng-in-Charge. |
| 28 | M&L RCC design mix M-30 grade (20mm graded aggregate),Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed by Eng-in-Charge. |
| 29 | M&L Forming 20mm thick expansion Joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound ,grade \"B\" with 150mm thick slab all as specified and directed by Eng-in-Charge. |
| 30 | M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Eng-in-Charge. |
| 31 | M&L for TMT bar 5 mm dia and over upto and including 10 mm diaas in stirrups, spacer and binders all as specified and directed by Eng-in-Charge. |
| 32 | M & L for cutting out bricks, forming jambs, including cutting, toothing for and properlybonding into old work, jointing and pointing in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6m radius built in cement mortar 1:6 complete in wall all as specified and directed by Eng-in-Charge. . |
| 34 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exceeding any radius in half brick thick walls, built in cement mortar 1:4 complete in wall all as specified and directed by Eng-in-Charge. |
| 35 | M & L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:6 finished fair even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge. |
| 36 | M&L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:-Water proofing compound shall be measured and paid saperately for top layer only.) |
| 37 | Supply only intigral water proofing compound conforming to IS-2645-2003 complete all as specified and directed all as specified and directed by Eng-in-Charge. |
| 38 | M&L preparation of new plastered/unplastered surface of ceiling and apply two coat white wash all as specified and directed by Eng-in-Charge. |
| 39 | M&L forpreparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including steel scaffolding complete all as specified by GE/Engineer-in-Charge. ( Note :bldg height 15m. ) |
| 40 | M&L two coats of oil emulsion distemper on new plasteredwall surfaces including chalk whitning, on plastered surfaces, preparatory to distempering etc complete all as specified and directed by Eng-in-Charge. |
| 41 | M&L two coats of cement based painton new plastered surfaces of wall. |
| 42 | M&L for PCC (1:2:4) Type B-0 using 12.50 graded stone aggregate as in coping incl necessary formwork etc complete all as specified and directed by Eng-in-Charge. |
| 43 | M&L for Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed by Eng-in-Charge. . |
| 44 | M&Lfor hard core of guage n exc. 63mm, broken stone, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface of all as specified and directed by Eng-in-Charge. |
| 45 | M&L 75 mm thick cement concrete 1:4:8 type D-2 (40 mm garded aggrgate) as in sub base of floor complete all as specified and directed by Eng-in-Charge. |
| 46 | M&L 40 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate), as in floor complete all as specified and directed by Eng-in-Charge. |
| 47 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18Sqm(Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thickscreed bed in CM 1:6 complete .All as specified and directed by Eng-in-Charge. |
| 48 | M&L Glazed ceramic colouredtiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match,.All as specified and directed by Eng-in-Charge. |
| 49 | M&L for rendering 10mm thick in CM 1:3 as in backing coat on wall surfaceto receive dado finished all as specified and directed by Eng-in-Charge. |
| 50 | M&L 75 mm thickPCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection & finishing the surface even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge. |
| 51 | M&L 4 mm thick frosted glass,and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed by Eng-in-Charge. |
| 52 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed by Eng-in-Charge. |
| 53 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame as per specification and drawing and directed..All as specified and directed by Eng-in-Charge. |
| 54 | S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, Length of bolt in mm 200 all as specified and directed by Eng-in-Charge. |
| 55 | S&F mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt in mm 300 all as specified and directed by Eng-in-Charge. |
| 56 | S&F Butt hinges of 100 mm size, Medium weight, cold rolled mildsteel and fixed all as specified and directed by Eng-in-Charge. |
| 57 | S&F aluminium anodised barrel tower boltsof extruded section, length of bolt in mm 150 all as specified and directed by Eng-in-Charge. |
| 58 | S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 150 all as specified and directed by Eng-in-Charge. |
| 59 | S&F aluminium anodised grill (DG 104) 10mm x 5 mm thick on Deco grill or equivalent fixed with \"F\" section of approved make complete all as specified and directed by Eng-in-Charge. . |
| 60 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 61 | S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge |
| 62 | M&L Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe ) etc as specified and as directed by Engr-in-Charge. |
| 63 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Eng-in-Charge. |
| 64 | S&F toilet paper holderwith flat recessed type stainless steel complete all as specified and directed by Eng-in-Charge. |
| 65 | Supply and fix , 10 litres capacity, PVC valve less,syphonicaction type flushing cistern, low level, white with inlet ball valve float, handle and flush pipe including brackets all as specified and directed by Eng-in-Charge. |
| 66 | Supply and fixLooking Mirror of size 600mmx450mm complete all as specified and directed by Eng-in-Charge. |
| 67 | S&F brass chromium plated shower rose 12mm size with or without swevel joints any size including fiexing to steel pipe or union all as specified and directed by Eng-in-Charge. |
| 68 | S&F soap dish vitreous china white approximate size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed by Eng-in-Charge. |
| 69 | S&F PVC (SWR) 75mm bore pipe , single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed by Eng-in-Charge. |
| 70 | S&F PVC (SWR) 75mm borepipes , single socketed in any length with rubber ring joints fixed to walls all as specified and directed by Eng-in-Charge. |
| 71 | S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints fixed to walls all as specified and directed by Eng-in-Charge. |
| 72 | M&L PVC (SWR) multi floor trap,75mm, with grating including jointing with solvent cement all as specified and directed by Eng-in-Charge. |
| 73 | S&F Supplied and fixed CI cowl 75 mm dia all as specified and directed all as specified and directed by Eng-in-Charge. |
| 74 | S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed all as specified and directed by Eng-in-Charge. |
| 75 | Supply & fixedstop valves, 15mm dia, cast copper alloy,CP, fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipeall as specified and directed by Eng-in-Charge. |
| 76 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flangesall as specified and directed by Eng-in-Charge. |
| 77 | Material and labour 25 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed by Eng-in-Charge. |
| 78 | Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed by Eng-in-Charge. |
| 79 | Material and labour 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete concilled,fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture complete all as specified and directed by Eng-in-Charge. |
| 80 | Material and labour, GI pipe 15 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge. |
| 81 | Material and labour, GI pipe 25 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge. |
| 82 | Material and labour, GI pipe 40 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge. |
| 83 | Supply and lay in trenches / along the wall / floorpipes GI light grade of size 100 mm with and including all fittings and accessories complete all as specified and and directed for cable protection complete all as specified and directed |
| 84 | S&Fangle stop valve of PTMT ofany colour high pressure screwed for iron pipe and fixed, (Minimum weight 90gms) 15mm bore dia all as specified and directed by Eng-in-Charge. |
| 85 | Supply and fixgun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe ofsizes 15 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 86 | Supply and fixgun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe ofsizes 25 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 87 | Supply and fixgun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe ofsizes 40 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 88 | S & F in Stack clamps out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe all as specified and directed by Eng-in-Charge. |
| 89 | S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) all as specified and directed by Eng-in-Charge. |
| 90 | S&F grating doom grating doom 100 mm diawith waste holeof PTMT (Minimum weight 25 gms) all as specified and directed by Eng-in-Charge. |
| 91 | S&F PVC connections for 15mm size with PTMT nuts of length 600mmall as specified and directed by Eng-in-Charge. |
| 92 | S&F PVC connections for 15mm size with PTMT nuts of length 900mmall as specified and directed by Eng-in-Charge. |
| 93 | M & l PVC (SWR) multi floor trap 75mmwith grating including jointing with solvent cement all as specified and directed by Eng-in-Charge. |
| 94 | M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed by Eng-in-Charge. |
| 95 | Salt-glazed stoneware gully traps, square or round mouthed, type `P\" 150 x150 mm |
| 96 | Cast iron Nahani trapwith grating including jointing to 75mm waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Eng-in-Charge. |
| 97 | S&F PVC (SWR) bend 75mm bore anyredious with access door all as specified and directed by Eng-in-Charge. |
| 98 | S&F PVC (SWR) 75mm bore branch piece, single (Single \"Y\") equal orwith acess door all as specified and directed by Eng-in-Charge. |
| 99 | S&F PVC (SWR) 75mm dia,floor trap, plain withgrating including jointing with solvent cement all as specified and directed by Eng-in-Charge. |
| 100 | S&F PVC(SWR) 75mm bore, vent cowl all as specified and directed by Eng-in-Charge. |
| 101 | M & Lfor sunken treatment of toilets and bathrooms, (floor area of toilet not more than 3 Sqm each)be carried out as follows :clean the floor and side of the sunken slab properly of concrete or any other type. Providetheslope of 1/40 towards the outside at the bottom concrete. Install a40 mm diameter spout pipe in the outer wall at the end of the floor slope. Keep this spout pipe about 225 mmaway from the outersidewall. Then do plaster 12 mm thick in CM 1:3 on the inner surface on the concrete surface duly adding waterproof compound. Apply two coats of polymer / PU on the inner side and floor of the sunken area. Apply two coats of 85/25 grade bitumen on it. Apply a bitumen coat on the GI Pipe also. Then lay a 150 mm thick brick bats coba layer at the bottom. Application of waterproof chemical in two layers of STP/ FOSROC/ CHOKSY/ASIAN or equivalent.Arrange 75mm dia PVC soil pipe without joints on it. Use the pipein one piece so that there are no joints in the soil pipe.once the joints of the pipe are ready. fill it with water and test for leakage after 24 hours and carry out smoke test.If seepage / dampness occured, then redo the plaster and other necessary treatment to stop the leakage or dampness all as specified and directed by Engr-in-charge. Note :- Rate shall be inclusive of all material and labours andnothing shall be paid extra. After the joint test of the pipe, fill the top of the pipe with cement concrete of 1: 5: 10. then laying tiles on top of cement concrete. Fill the joints of the tiles with acrylic waterproof paints, Epoxy lapi shall be use for fill joints |
| 102 | S&F Rotational moulded polyethylene water storage tanks 2000Ltr cap (cylindrical vertical with closed top) hoisted and fixed in position with ball brass valves 25mm, high pressure, with polythenefloat valve & fly nut screwed for iron pipe or brass ferrule and fixedall as specified in SSR pt-1 all as specified and directed by Eng-in-Charge. |
| 103 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltr cap (cylindrical vertical with closed top) hoisted and fixed in position with ball brass valves 25mm , high pressure, with polythenefloat valve & fly nut all as specified in SSR pt-1 all as specified and directed by Eng-in-Charge. |
| 104 | M&L rendering 15mm thick as on roof in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge. . (Note:-Water proofing compound shall be measured and paid saperately.) |
| 105 | M&L APP based polymeric membrane minimum weighing 3K/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land onprimed surface by forced application completeall as specified and directed by Eng-in-Charge. |
| 106 | Note:-(a) All above items of Bldgs Construction are forG+3 RCC framed structureup to height14.0 to 15 .0 m above GL , with cast-in-situ boredpile 10.0 M below GL as specifiedalongwith pile cap foundation as specified and directed.Nothing shall be paid extra on this account on later stage etc completed.(b) Rate quoated shall be inclusive of all safety measuresincluding local area bylaws to avoid pollution and Environmental norms . (c) Contractor should visit the site before quoting the rate and should understand clear scope of work . (d) Building works are to be carried out adjacent to the existing structure, which is currently occupied. Any interference with the occupants should be minimized. Care must be taken to execute the work without causing any inconvenience to the occupants. All required safety measures should be implemented meticulously. |
| 107 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150 mm |
| 108 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. |
| 109 | M&L PCC 1:4:8 type D2 using 40 mm aggregate concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested for bore dia of pipe 150 mm |
| 110 | M&L PCC 1:4:8 type D2 using 40 mm aggregate, 300mm concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested for bore dia of pipe300 mm |
| 111 | M&L Reinforced concrete pipes, class NP2, laid and jointed complete with collars bore of pipe 150 mm |
| 112 | M&L Reinforced concrete pipes, class NP2, laid and jointed complete with collars bore of pipe 300 mm |
| 113 | M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm widthwith modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface allas directed and specifiedforOne light point controlled by one, one way switchNote : (1) Making good to match with the adjoining surface shall be included in the unit rate.(2) Rate is inclusive of Cutting/chases of wall/floor/ceiling |
| 114 | All as per item No 113 above but one light point controlled by two 2-way switches, cable 1.5 sq.mm size |
| 115 | All as per item No 113 above but One ceiling /exhaust fan point controlled by one switch and regulator |
| 116 | All as per item No 113 above butOne 3 pin 5 amp socket out point on the same board with other switches. |
| 117 | All as per item No 113 above but One3 pin 5 amps socket out let point on independent board |
| 118 | All as per item No 113 above butone socket outlet 15 Amp on independent boardwith4 Sq mmcableand2.5Sq mmearthwire. |
| 119 | All as per item No 113 above butone socket outlet 15 Amp on independent boardwith2.5 Sq mmcableand1.5Sq mmearthwire. |
| 120 | Supply and Fix ofSwitch piano flush type single pole one way 5 Amp complete all as specified and directed. |
| 121 | Supply and Fix ofSwitch piano flush type single pole two way 15 Amp complete all as specified and directed. |
| 122 | Supply and FixofCeiling rose surface bakelitetwo to three terminal complete all as specified and directed. |
| 123 | Supply and Fixof Switch socket combined two in one 06 pin 5/15 Amps flush type universal complete all as specified and directed. |
| 124 | Supply and Fix ofSwitch Socket multipurpose 5 pin 5 Amps 240 V flush type complete all as specified and directed. |
| 125 | Supply and Fix ofLamp holder,insulated body with back plate and LED lamp complete all as specified and directed |
| 126 | Supply and Fix of MCB DB SPN 8 Waysingle door type 415 V with bus bar complete all as specified and directed |
| 127 | M&L MCCB DB verticle type made of sheet steel , powder painted with neutralbus bar 200 A, neutral link,IP-30-IK08 protection grade , 415Volts TPN with 4 way Double door complete all as specified and directed, Make : Indo Asian/Havells/Polycab |
| 128 | M&L MCCB TPN 100 Amps , 415Volts, 25KA ,3 Polecomplete all as specified and directed, Make : Indo Asian/Havells/Polycab |
| 129 | Supply and Fix of MCB SP 06 to 32 Amps 240 Volts complete all as specified and directed. |
| 130 | Supply and Fix of SPN 6- 40 Amps 240 Volts complete all as specified and directed. |
| 131 | Supply and Fixsingle pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified and directed.Note for item No 125, 126 & 130:The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including framemade out of MS flat 40x5mm(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface |
| 132 | S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronicDriver ,connector block ect.with all assoceries intenallt prewired &includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clampsPVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA |
| 133 | Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA. |
| 134 | M&L for sub main wiring with three single core 10 Sqmm FR PVC insulated with one run of Nutral Black Colour and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed.Note :-Five single core cables along with earth wire and Nutral and Casing -N-Caping shall be measured as one unit length |
| 135 | M&L for sub main wiring with two single core 6 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed.Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length |
| 136 | Supply and fix Electric storage water heater (Geyser)25 Ltrs capacity, 230 volts, single phase, 50 Hz, of rated power 2000 Watt, rated water pressure .8 Mpaincl all accessoriesincluding taking down unservviceable geyser from existing place & deposited into AGE E/M (AF) Mumbai store yardand making good for disturbed surfaces, including water connection arrangement with sutable Hot/Cool Pipe as per spicefied and directed. |
| 137 | Supply and fix exhaust fan 300 MM sweep, 230 volts, 50 hz, metallic grey colour with louvers complete all as specified and directed. |
| 138 | M&L Earthing complete with Galvanised plate electrode 60×60cm ×3.15mm size & copper strip 20 x 3 mm brazed with copper plate buried in ground not less than 1.5 Mtrs deep with PCC chamber complete all as specified and as directedmeans of bolts, nuts, check nuts and washers of brass check nuts and washers of brass including necessary earth work, PCC chamber , CI cover with frame, funnel, mesh, Earth lead protection pipe, 7.5 Meter Earth Lead etc all as shown in electrical plate No 5 in SSR Part-I and connected to earth test point/LT Panel/Transformer including testing on completion all as directed by Engr in-Charge |
| 139 | M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed.Note : Punned thickness shall be measured |
| 140 | Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed |
| 141 | Supply and lay cable XLPE Insulated armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 25 sq mm 3.5 Core complete all as specified and directed. |
| 142 | S & F In repairs outdoorHeatshrinkable end termination kit for 1100 volt grade cable complete with jointing material and accessories suitable for 3.5 core 25XLPE armoured aluminium conductor LT cable ofincludingcutting and taking out of unserviceable cable end termination jointing kit complete all as specified and directed . |
