Tender For Dhule Industrial Area Interior Work Of Newly Constructed Office Building With Internal Electrification. - Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards,screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 2 Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. 3 Providing and supplying Armstrong ‘Optra Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. (Rates excluding GST) 4 Providing and fixing Wooden rafter or ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using 9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge (Laminate Finish) (Rates excluding GST) 5 Providing and fixing Carpet Tile of CCIL make, shade and pattern and of the following specification: Loop pile carpet tile,of size 500 mm x 500 mm with Tufted… (Rates excluding GST) 6 Providing and Fixing in position Aluminium Frame work for Partitions, paneling, boxing, soffits with vertical members at not more than 600 mm centers & horizontal members not more than 600 mm centers.with L patti joint , Complete including necessary aditional supports, bracing runner etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) Size 50 X 50 X 1.62 mm 7 Size 50 X 25 X 1.62 mm 8 Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) 6 mm thk Marine plywood 9 9 mm thk Marine plywood 10 12 mm thk Marine plywood 11 19 mm thk Marine plywood 12 9 mm thk Decorative MDF panelling 13 Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish as per the direction by Architect. (Rates excluding GST) 14 Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.) (Rates excluding GST) 15 Providing & fixing Trap Doors made out of required framework, 19mm thk plywood finished with material 1.5 mm thk laminate from outside and 1mm thk laminate from inside. Site modification as per requirement has to be undertaken without any extra cost. (Rates excluding GST) 16 35mm thk Flush Door both side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door or Partly Glazed finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. (Rates excluding GST) 17 Storages Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides, top, bottom shelves made out of 19mm marine plywood for all inside surfaces 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board finish with material & 6mm thk teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces& be finished with melamine polish.4) Finish 1mm thk laminate inside & 1.5mm thk laminate out side, hardwares such as heavy duty hinges, brass body locks (Ebco make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 1 mm thk laminate. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect (Rates excluding GST) 18 Assistant Table (size 1500 x Number 900 x 750 mm) side table (size 1100 x 450 x 700 mm) in Laminate... Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be Laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching Laminate. (Rates excluding GST 19 Reception Table (2000 X 600 X Number 975)... Providing and fixing in position Reception Table of approved shape made out of 19 mm thick marine grade plywood fixed on intermediate 19mm thick marine grade plywood verticals at certain interval (as shown in the drawings) with necessary wooden members & S.S.studs with glass top finished with approved Laminate finish on all exposed surfaces. .Also including cost of all necessary wooden beading / mouldings finished with melamine polish. Rate should be including cost of hardware of approved make. complete as per detail drawing, as specified and as directed by Architect. For Reception Counter - Two pedestal with 4 nos of drawer & one keyboard tray is required. (Rates excluding GST) 20 Conference Table (size 8600 x 2000 x 750 mm)... Providing & fixing in position Meeting Room Table of approved shape shown in drawing. Table top made out of 19*19mm & 50*38mm TW frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50*50 mm TW frame work with both side 9 mm thk marine plywood finished with approved veneer. Edge of Table finished with 50*50 mm TW moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved veneer. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50*50 mm wooden connecting members. (Size as per enclosed drawing) Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved veneer. Sides finished with approved veneer & melamine polish complete as per detail drawing, as specified & as directed by Architect. (Rates excluding GST) 21 Dining Table Size 900 x 900 x 750 mm ht... Providing & arranging in position Dining tables made out of Laminate top and stand with proper joinery & hardware as per drawing. the top finished with bevelled edges. Item to be completed in all respect as per drawing & instructions from Engineer-incharge (Rates excluding GST) 22 CENTER-TABLE... CENTER -TABLE - Providing & arranging in position centre tables made out of TW members 40X 75 mm with proper joinert & hardware as per drawing. The top finished with 12mm thk tinted glass with bevelled edges. Item to be completed in all respect as per drawing & instruction from E.I.C. of given size & shape (Rates excluding GST) 23 CORNER-TABLE... Square/circular corner Table - Providing & arranging in position centre tables made out of TW members 40X 75 mm with proper joint & hardware as per drawing. The top finished with 12mm thk tinted glass with bevelled edges. Item tobe completed in all respect as per drawing & instruction from E.I.C. of given size & shape (Rates excluding GST) 24 Modular workstations consist of low ht. partition screen, work tops, Pedastal unit ,filing stoarges( only in few cases), key board tray & CPU trolley as specification mentioned below.The profiles of the Aluminium partition frame should be as per the attached sheet and the as per the weight per Rmt mentioned on the sheet.. Work top - 25 mm hk. Pre laminated particle board cut to size & shape as per design & drawings. Edges to be fixed with 2mm thk PVC edge binding of approved make & matching to laminate. Key board tray & CPU Trolley - Each work station shall have PVC moulded key board tray & M. S. powder coated CPU Trolley with castors. Pedastal unit - 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus & 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extension ball bearing slides. Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board and white board. Screen in front of the table to have frosted glass panel above table top. (Rates excluding GST) 25 EXECUTIVE cabin table (size 2750 x 1200 x 750 mm) side table (size 1500 x 600 x 700 mm) in Veener.. Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be veneer with melamine polish. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching veneer all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock etc. drawings & also shall include CPU unit as shown in the drawings approved by Engineer-in-charge/Architect. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer in approved pattern as per drawings. All exposed surface of side unit to be finished with an approved veneer. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer & openable shutters, as per the drawing & details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade & make. All complete 26 Staff Chair..Providing and placing in requireed position Godrej make Bravo Visitor Back 9U12RX 1 or equivalnet approved make the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.complete as per manufacture specifications and as per instruction of Engineer in charge. (Rates excluding GST) 27 Providing and placing in requireed position Godrej make Kareena Visitor Back or equivalnet approved make the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon. complete as per manufacture specifications and as per instruction of Engineer in charge (Rates excluding GST) 28 Providing and placing in requireed position Godrej or equivalent make Halo Mid Back Chair Model PCh- 9200R or approved equiivalant chair of size size 50.0cm W X 49.5cm (H) with 75.o cm (D) including necessary approved type and colour fabric complete as per manufacture specifications and as per instruction of Engineer in charge. (Rates excluding GST) 29 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 30 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery 31 Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring/ rubberised coir/ 32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet (fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge. (Rates excluding GST) a) Single Seater Sofa 32 b) Three Seater Sofa 33 c) Two Seater Sofa 34 palmet / Jamblining (upto 250mm wide).. Providing & fixing in position jamb lining of 19mm thk. plywood & finished as below with wooden moulding, exposed surfaces polished with 3 coats of melamine polish. All complete as per drawing & instructions of Engineer-incharge (Rates excluding GST) 35 Providing and fixing in position 12mm thick Soft Board paneling on partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per detail drawing, as specified and as directed by Architect/Enginner In Charge.. (Rates excluding GST) 36 Dust Bin (300mm Dia).. Providing & arranging in position dust bins out of perforated (min Size 350 mm dia x 400 mm Height). Item to completed in all respect as per drg & directions. (Rates excluding GST) 37 Roller Blinds..Providing and fixing Collinear Window Sahdings from Livin in 3/2 vane size having headrail and bottom rail made of aluminium alloy extruded profile, powder coated and provided in standard natural white color. The rolling tube should made up of aluminium alloy from extruded profile of Ø34 mm. The headrail dimensions should be in the range of: H 58mm x 72mm for the larger headrail. The cassette should conseal the working mechanisme rotary-- clutch that raises, lowers and tilts the shade contains and protects shading fabric when fully raised. All plastic parts are in white color. Operation options: endless cord loop. Installation to be done by quick release brackets (wall or ceiling). The fabric of this Silhouette Window Shadings should be anti static polyester vanes which have facings between 2 sheers layers (50mm wide) to reduce glare. Sheer layers made of white 100% knit polyester & the selection of colors, textures and opacities from the Livin collection as specified by the architect. The shading to be opearted by Esayrise mechanism with a continous cord loop operating option. The FABRIC shall be constructed from spun - bonded 100% polyester fibre, having Greenguard certified and recommended for sensitive areas like clean room condition and laboratories.all complete as per instructions of Engineer - in - charge. (Rates excluding GST) 38 Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (Wall Fabric / Paper), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation (on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge. (Rates excluding GST) 39 Providing & fixing Artificate like Artifical Plant, Picture Artificial plants 40 Picture frame 41 providing and fixing approved Black Out Curtain to be fixed & commissioned as per manufacturers specification the work to be completed as per satisfaction and approved of EIC (Rates excluding GST) 42 Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 43 Providing and fixing in position 12 mm thick Toughened Fully Clear Glass Door by using various glass patch fittings to be fixed with necessary fittings on the ceiling duly finished without giving any load on the false ceiling by using necessary hardware what ever necessary and required numbers to complete the job in all respect. Rate including cost of door with approval hardware such as patch fitting lock, handle, Floor Spring of approved make. Contractor is advised to submit working drawing with details patch fitting, sizes of glass panels etc and take approvals of consultants before execution of works. complete as per detail drawing, as specified and as directed by Architect. (Rates excluding GST) 44 Providing & fixing glazed partition made out of 8 mm thk clear glass with designs pattern as shown in drawing. Glass should fixed with required size of wooden beading which finished with 3 coats of melamine polish. Rate including cost of glass edge machine polishing in between 2 glass edges touching together (if required) complete all as per the drawing, details & specification & to the satisfaction of Engineer-in-charge. (Rates excluding GST) 45 Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 46 Forssted 3m film.. Providing & fixing in position approved make colour & shade frost film on glass complete as per direction of manufacturer & instruction of Engineer - in - Charge. (Rates excluding GST) 47 Providing and fixing Indian teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc. complete. 48 Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 49 Concealing of Conduits (WG-MA/CC) Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 50 Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 51 Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 52 Point Wiring (WG-PW) Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW 53 Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW 54 Point wiring for independent plug in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW 55 Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WG-PW/CW 56 Modular switches and Accessories Supplying and erecting modular type switch 16/20 A with indicator on provided plate and box with wiring connections complete. 57 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. 58 Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete. 59 Supplying and erecting modular type telephone socket two gang with safety shutter on provided plate and box with wiring connections complete. 60 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 61 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 62 MAINS CIRCUIT WIRING- Providing and laying of following PVC Supplying and erecting PVC insulated PVC round sheathed FR 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 63 Supplying and erecting PVC insulated PVC round sheathed FR 1.5 sq.mm (30 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 64 Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 65 Supplying and erecting PVC insulated PVC round sheathed FR 4 sq.mm (56 no. x 0.30mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 66 Indoor LED Fittings (FG-IDF/LED) Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 67 Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 68 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 69 Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. 70 Decorative Outdoor Fittings (FG-ODF) Supplying and erecting Gate / garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT. 71 Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL. 72 Accessories for Indoor Fittings (FG-AS) Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden / sunmica board. 73 Supplying and erecting electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply. 74 Accessories for Outdoor Fittings (FG-BKT) Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC. 75 Cable Tray (CB-CT) Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. 76 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. 77 LT Cables (Copper) (CB-LT/CU) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 78 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 79 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 80 Energy Devices (APFC Panel) (CP-ED/APFC) Supplying, erecting, testing & commisioning 100 kVAr, 440 V, 3 phase, 50 Hz., APFC Panel with contactor logic with intelligent microprocessor relay, consisting of 2,3,5,10,20.20,20,20 or suitable steps of APP/MPP type capacitor units with detuned (harmonic filter) reactors of suitable rating, APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP-ED/APFC. 81 LT - MCBs/ MCB Change Over Switch (SW-MCB) Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 82 Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 83 Supplying, erecting & marking DP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 84 Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 85 Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 86 Supplying, erecting and marking 4 pole isolator only switch version of miniature circuit breakers of 40A in provided distribution board. 87 LT - MCBDBs (SW-MCBDB) Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB. 88 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways/24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB. 89 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways/36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB 90 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB 91 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB 92 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB 93 Fans (FG-FN) Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation. 94 Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF 95 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF 96 Air Conditioners (AP-AC) Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC 97 Water Coolers & Refrigerators (AP-WC) Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC 98 Water Purifiers (AP-WPF) 99 Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) Rooftop ON grid solar systems (ESD-RT-ONG) 100 Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar pV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liasoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete upto net meter installation and export to the grid with 5 year ON-SITE warranty and 5 Years fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. 101 Concealing of Conduits (WG-MA/CC) Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 102 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. 103 Telephone, Audio and Video Wiring (WG-TW/TW) 104 Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW 105 Supplying, erecting & terminating 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW 106 Telephone Accessories (WG-TW/TA) Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TA 107 Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA 108 Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 32 universal extensions suitable upto 96 extensions compliant to IEC 61000, EN 60950, CISPR 22, IS:9000 part 2/section 4 having LAN/WAN port, USB port, RS232 port as per specification complete as per specification no. WG-TA 109 Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & speaker unit as per specification complete. 110 Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. 111 Modular switches and Accessories Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and box with wiring connections complete. 112 Supplying and erecting modular type telephone socket two gang with safety shutter on provided plate and box with wiring connections complete. Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete. 113 Supplying and erecting modular type blanking plate two module, on provided plate & box. 114 Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module complete. 115 Cable Tray (CB-CT) 116 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 100 mm height with required standard accessories. 117 ELV Cabling (WG-ELVC) Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable with rodent proof and anti termite jacket suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n capping as per specification no. WG-ELVC/NC 118 Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-D standards as per specification no. WG-ELVC/NC 119 Supplying and erecting 24 fibers LSZH armoured multimode optical fiber cable with , core dia 50/125 µm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC 120 Supplying and fixing 3 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of cat 6 type compliant ANSI/TIA-568.2-D standards in position as per specification no.WG-ELVC/PC 121 Supplying and installing LSZH sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC Networking Accessories (WG-NAS) 122 Supplying, installing and testing UTP connector (RJ-45) as per specification no. WG-NAS/UTPC. 123 Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP 124 Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU 125 Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm) as per specification no. WG-NAS/RAK 126 Networking Components (WG- NWC) 127 Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch, 10/100/1000 base-T, PoE smart switch plus 2 SFP erected in provided rack compliant with IEEE 802.3 standards complete. 128 Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE 802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no. WG-NWC/ENS 129 Supplying, fixing, and configuring broadband router with all accessories on provided rack 130 Supply, Installation, Testing & Commissioning of 2MP, IP Camera, 1/2.8 type CMOS image sensor, fixed lens 2.8 / 3.6 mm, H.265 / H.264 & MJPEG triple-stream encoding, 25/30fps@1080P (1920 ×1080), Max IR LEDs length 30 m, IP66 rated, Fixed Dome Camera. CCTV camera - IP - Dome - Cpplus / Hikvision make 20mtr - 2.8 / 3.6mm lens 131 Supply, Installation, Testing & Commissioning of 2MP, IP Camera, 1/2.8 type CMOS image sensor, fixed lens 3.6 mm / 4 mm, H.265 / H.264 & MJPEG triple-stream encoding, Max. IR LEDs length 30 m , IP66 rated, 25/30fps@1080P (1920 ×1080), Support ICR for day time and night time operation, Fixed Lens Bullet Camera. CCTV camera - IP - Bullet - Cpplus / Hikvision make 30mtr - 2.8 / 3.6mm lens 132 Supply, installation, testing and commissioning of UL Listed Network Video Recording System (in multiple of 32 channels) should be capable of recording 32 cameras at D1 resolution @ 25 FPS for 100% recording for 30 days. Required HDD for the same to be considered. CCTV NVR 32 channel - Cpplus / Hikvision make + 8TB HDD - Toshiba / WD make Supply , Laying , Testing & Commissioning of 42” LED Display with necessary connectors , inter linking cords etc. complete as required. 133 Supply, Installation, Testing & Commissioning of Cat-6 patchcord-1Meter long. Supply, Installation, Testing & Commissioning of Jack panel 24 port fully loaded. 134 IO Box + Plate + RJ45 jack. 135 PVC box 5*5
