|
| 1 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm & removing to store complete all as specified and directed. |
| 2 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame exceeding 1.50 sqmand n exc 4 sqm each & removing to store complete all as specified and directed. |
| 3 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packedwithPCC 1:3:6,back side all around frame complete all as specified and directed. |
| 4 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed. |
| 5 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 6 | S&F Aluminium handle cast type anodized 150 mm long complete all as specified and directed. |
| 7 | S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed. |
| 8 | S&F powder coated anodised aluminium frame for doors, windows, ventilators ,partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 9 | S&F powder coated, any colour, aluminum door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 10 | M & L sheet glass selected quality plain 5.5mm thickness fixed in alum frame fordoors, windows, ventilators ,partition cut to required size and fixed with PVC/Neopane gasket etc Alongwith solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 11 | S&F 100 mm size mortice lock of brass, vertical type,4 levers, complete all as specified and directed. |
| 12 | S&F door stopper of aluminum alloy body and tongue anodised with rubber shoes fixed to door with screws complete all as specified and directed. |
| 13 | S&F in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and directed. |
| 14 | S&F in repairs double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with including taking down of door and refixing the same complete all as specified and directed. |
| 15 | S&F 35mm thick factory made plain framed, panelledshutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 16 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed by Engineer - in - Charge. |
| 17 | S&F aluminium extruded alloy handles fabricated type anodised of size 150mm complete all as specified and directed. |
| 18 | S&F aluminium anodised barrel tower bolt of size 150mm long extruded section complete all as specified and directed. |
| 19 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections completeall as specified and directed. |
| 20 | M&L for preparation of new wooden surfacesof any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer completeall as specified and directed. |
| 21 | S & F 12mm thick toughned glass door including necessary accessories suitable for door i.e. floor spring ,Top pivot ,bottom patch, top patch ,patch lock , \"H\" type stainless steel handle and locking arrangement including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded complete as approved by GE. |
| 22 | M&L for aluminium powder coating (powder coated of required colour) three track sliding windows frame top and sides of size 92x31.75x1.5mm (section No 20831), bottom size 92x31.7x1.5mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737) with rubber gasket beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperature and fixed with stainless steel wire staples and fixing 5mm thick glass (plain/tinted/with laminated film)with necessary rubber beading gasket etc complete all as specified and as directed. |
| 23 | S & F in repairs aluminium power coated (min thickness of powder coating 50 micron of approved colour ) ventilator ,partially glazed and partially louvers ,outer frame and mullion fabricated with aluminium section of size 82.50mm X 38 mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick froasted glass including aluminium louver patti including SS wire gauge for fixing of 0.36mm dia and 1.40mm width aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting and fixture and fixed in position complete all as specified and directed. |
| 24 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 25 | M & L 10mm thick rendering in Cement Mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 26 | M&L for 15 mm thick rendering in CM 1:4 onconcrete surfaces / fair faces of brick masonary wall including mixed with water proofing compound @ 3% by weight of cement, finishedeven and smooth without using extra cement complete all as specified and directed. |
| 27 | M & L rendering 15mm thick on fair facesof brick work or concrete surfacesin CM 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge. |
| 28 | M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specified and directed. |
| 29 | M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge . |
| 30 | M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation ofsurfaces complete all as specified and directed. |
| 31 | M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge. |
| 32 | M&L for Preparation of new plastered surfaces of wall and applying twocoats ofacrylic emulsion(weather coat) paint over a coat of primer using roller brush complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for preparation of oldsurfaces of wallsand applying two coats of distemper oil emulsioncomplete all as specified and as directed. |
| 34 | M&L for two coat of white wash on old decorated surfaces of walls including complete removal of existing treatment complete all as specified and as directed. |
| 35 | M & L 3 mm thick wall care putty on wall complete all as specified and directed by Engineer-in-Charge. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 37 | Material and labour for Glazed ceramic coloured tiles of size 600mmx 300mm, 450mm X300 mm , 7mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed. |
| 38 | Material and labour for Non Skid ceramiccoloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed. |
| 39 | M&L for HD Matt finish/Digital/ Double ChargedPolished Vitrifiedtiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles size:-800 x1600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 15mm thick CM (1:4) screed bedwith including tile adhesive complete all as specified and directed. |
| 40 | Material and labour for Glazed ceramic coloured tiles of thickness9 to 10 mm thick(square/Rectangular) ,area of each tile exc. 0.5sqm and not exc 3 sqm, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4)with tile adhesive complete all as specified and as directed . |
| 41 | M&L for 16-18mm thick granite (of any type/ colour) work (table rubbed and polished) for steps ,jambs ,pillars ,window cill andwall lining (veneering to wall) 12mm thick in cement mortar (1:3)or chemical adhesive including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge. |
| 42 | M&L for 18 to 20mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 43 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | M&L 25 mm thickcement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors levellingfor tilescomplete all as specified and directed by Engineer-in-charge. |
| 45 | Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 46 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 47 | M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in cement mortar 1:6 complete all as specified and directed. |
| 48 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store completeall as specified and directed. |
| 49 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store completeall as specified and directed. |
| 50 | Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store completeall as specified and directed. |
| 51 | S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. |
| 52 | S&F Chlorinated PVC (CPVC) pipes 25 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. |
| 53 | S&F Chlorinated PVC (CPVC) pipes 40 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. |
| 54 | S&F in repairs 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed. |
| 55 | S&F in repairs 25 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed. |
| 56 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified. |
| 57 | S&F 110mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 4kg/sqcm)in any length with rubber ring joints laid in trenches or in floors / walls fixed withand including PVC clamps, complete all as specified and directed. |
| 58 | S&F 75mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 4kg/sqcm)in any length with rubber ring joints laid in trenches or in floors / walls fixed withand including PVC clamps, complete all as specified and directed. |
| 59 | S&F 40mm PVC (SWR) pipes, single socketed in any length with rubber ring joints with adhesive solvent fixed to wall or flooras in urinal/ WHB waste water line and similar works etc complete all as specified and directed. |
| 60 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor110mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 61 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor75mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 62 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor 40mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 63 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 64 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 65 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 66 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 67 | Supply & fixing 40mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 68 | Supply&fixingPVC(SWR)floortrap,plainwithgrating,suitablefor100/75mmborepipeincluding jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 69 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 70 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specified and as directed by Engineer-in- charge. |
| 71 | Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe completeall as specified and directed. |
| 73 | S&F chromium plated shower rose overgead single flow (chrome plated) with arm including fixed to steel pipes or unions anmd complete all as specified. (Make- CERA Cat part No F 7010212 AB or techno commercially equivalent as approved by GE.) |
| 74 | S & F in repairs 15mm bore CP Angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed completeall as specified and directed. |
| 75 | S&F in repairs 15 mm size pillar cock with swan neck spout(Left / right) and aerator fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. (Make :CERA Cat part No F2014104 or techno commercially equivalent as approved by GE.) |
| 76 | S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm, complete all as specified and directed. |
| 77 | S&F in repair brass chromium plated bottle traps for wash basinsand urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 78 | S&F in repair stainless steel grating doom 150 x 150mm complete all as specified and directed. |
| 79 | S&F in repairs 15 mm size two way bib cock with single handle and wall flange cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed. (Make :Cat part No F2002163 of CERA or techno commercially equivalent as approved by GE.) |
| 80 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 81 | S&F in repair toilet paper holder with stainless steel wall flange complete all as specified and directed. (Make : Cera Cat part No F5015109CH or techno commercially equivalent as approved by GE.) |
| 82 | S&F in repair towel ringwith stainless steelwall flange complete all as specified and directed. (Make : CERA Cat part No F5013115CH or techno commercially equivalent as approved by GE.) |
| 83 | S&F in repair soap dispensor with glass bottle complete all as specified and directed.(Make : CERA Cat part No F5012111CH or techno commercially equivalent as approved by GE.) |
| 84 | S&F in repair soap dish (Glass) holder with wall flange complete all as specified and directed. (Make : CERA Cat part No F5013116CH or techno commercially equivalent as approved by GE.) |
| 85 | S&F in repair Table top basin with fixing accessories of size 520mm x 360mm x 125mm complete all as specified and directed. Make : Jaquar Cat Part No KUS-WHT-35935 or techno commercially equivalent as approved by GE.) |
| 86 | S&F Single piece slim Concealed flush cistern with floor mounting frame ,installation kit and \"\"P- Type \" Drain Pipe connection set for wall hung WC complete all as specified and as directed. (Make : Jaguar Cat part No JCS-WHT-2400FP or techno commercially equivalent as approved by GE.) |
| 87 | S&F in Rimless,blind installation wall hung WC with UF soft close slim seat cover,hinges ,fixing accessories and accessories set of size 360mmx500mmx335mm with \"P\" trap 180 mmcomplete all as specified and as directed. (Make :-Jaguar Cat part No-KUS-WHT-35953BIUFSM or techno commercially equivalent as approved by GE.) |
| 88 | S&F in Control Plate Aliveflush including accessories complete all as specified and as directed. (Make :-Jaguar Cat part No JCP-CHR-852415 or techno commercially equivalent as approved by GE.) |
| 89 | S&F in repair urinal partition with frosted glass 10mm chrome finish of size 900mm x 450mm complete all as specified and directed(Make : CERA Cat part No S4090105 or techno commercially equivalent as approved by GE.) |
| 90 | S&F in repair urinals without sensor (back inlet) with all fixing accessories of size 265 x 335 x 695mm complete all as specified and directed. (Make : CERA Cat part No S4020116 or techno commercially equivalent as approved by GE.) |
| 91 | S&F in repair urinal flush valve concealed push type (single flush ) 32mm ofchromium plated for fixing with 15 mm dia pipe complete all as specified and directed. (Make : CERA Cat part No F8010108 or techno commercially equivalent as approved by GE.) |
| 92 | S & F 600 x 450 mm size beveled edge mirror 5mm thick of selected quality glass mounted on 6mm thick commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer - in - Charge . |
| 93 | S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat cover with mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F Hand rail wall mounted hinged size 750x100 mmcomplete all as specified and directed. Make : (Cera CAT No. B2210108 or techno commercially equivalent as approved by GE.) |
| 95 | S&F wall mounted Grab bar 600mm long complete all as specified and directed. Make : Cera catNo. B2210106 or techno commercially equivalent as approved by GE.) |
| 96 | S&F wall mounted inverted \"L\" shaped grab bar with 500 & 700mm long bars complete all as specified and directed. Make : Cera catNo. B2210103 or techno commercially equivalent as approved by GE.) |
| 97 | S&F 5mm thick looking mirror glass with selected quality of any sizeincluding fixing with SS studs and similar etc complete all as specified and as directed. |
| 98 | S&F in repair 25 mm dia stainless steel rod drapery rod cut to size and fixed in position, including all fittings, brackets complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F in repairs aluminium anodised brackets powder coated to match with rod for curtain rod of 25mm dia complete all as specified and as directed. |
| 100 | Demolition of stone slabs, brickwork and tiles of any description in floors, apronsetc. Laid bedded, pointed in any mortar complete all as specified and directed. |
| 101 | M&L for Hardcore of broken stones or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc 15 cm thickwatered and rammed to a true surface completeall as specified and directed. |
| 102 | M&L 50 mm thick PCC 1:2:4 type B-1 using 20 mm gradedstone aggregate complete all as specified and directed. |
| 103 | M&L for PCC 1:4:8 type D-2 using 40 mm gradedstone aggregate as in foundation, filling, mass concrete complete all as specified and directed. |
| 104 | M&L for 15 mm thick rendering in CM 1:4 onconcrete surfaces / fair faces of brick masonary wall ifinishedeven and smooth without using extra cement complete all as specified and directed. |
| 105 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 106 | S&F Anchor fastener of size 10mmX100mm fixed to walls or ceilings and sustained 100kg of weight completeall as specified and directed. |
| 107 | Supply only integral water prrofing compound completeall as specified and directed. |
| 108 | Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and directed by Eng-In-Charge. |
| 109 | M&L for point wiringfor modular accessories with modular metal flush boxof suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLScable 1100 volts grade drawn throughmetallic rigid / PVC heavy duty concealed conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge for the following :-(a) One light/bell/fan pointcontrolled by one switch complete all as specified and directed. |
| 110 | All as per item No 109 here in before but one 3 pin socket out let 5 Amps on the independent board complete all as specified and directed. |
| 111 | All as per item No 109 here in before but one 3 Pin socket out let 5 Amps on the same board complete all as specified and directed. |
| 112 | All as per item No 109 here in before but with cable of size 2.5 Sq mm PVC insulated on independent boardfor power plug 15 Amps.complete all as specified and directed by Eng-In-Charge. |
| 113 | All as per item No 109 here in before but with cable of size 4 Sq mm PVC insulated on independent boardfor power plug 15 Amps.complete all as specified and directed by Eng-In-Charge. |
| 114 | S&F in replacement Modular switch one way 6A,1 Module,complete all as specified and directed by Eng-In-Charge. |
| 115 | S&F in replacement Modular switch one way 16A,1 Module,complete all as specified and directed by Eng-In-Charge. |
| 116 | S&Fin replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge. |
| 117 | S&F in replacement Modular socket 16/15A-2/3 pin combined2 Modulecomplete all as specified and directed by Eng-In-Charge. |
| 118 | S&Fin replacement electronic regulator Switch/sockettypecomplete all as specified and directed by Eng-In-Charge. |
| 119 | S & Fin replacement white cover plate with frame, 3 module complete all as specified and directed by Eng-In-Charge. |
| 120 | S & F in replacement white cover plate with frame, 4 module complete all as specified and directed by Eng-In-Charge. |
| 121 | S & Fin replacementwhite cover plate with frame, 6 module complete all as specified and directed by Eng-In-Charge. |
| 122 | S & Fin replacement white cover plate with frame, 8 module complete all as specified and directed by Eng-In-Charge. |
| 123 | S & Fin replacement white cover plate with frame, 12 module complete all as specified and directed by Eng-In-Charge. |
| 124 | M&L for Sub main wiringin replacement complete with two run of16 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductorFRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 16 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :-Two run of 16 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length complete all as specified and directed by Eng-In-Charge. |
| 125 | M&L for Sub main wiringin replacement complete with two run of6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductorFRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :-Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length complete all as specified and directed by Eng-In-Charge. |
| 126 | M&L in replacementof sub main wiring complete with PVC insulated cable two run of04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -cappingwith accessories incl4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit |
| 127 | Supply and fixingin replacement TPNdouble door DB 4 way incl civil work complete all as directed by Engineer-in-Charge. |
| 128 | Supply and fixingin replacement TPNdouble door vertical distribution board without mccb 6 way incl civil workcomplete all asdirected by Engineer-in-Charge. |
| 129 | Supply and fixingin replacement sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp ratedbus barsand neutral links ( without MCB\"s) 12 ways SPN complete all asdirected by Engineer-in-Charge |
| 130 | All as per item No 129 here in before but 8 way. |
| 131 | S & F in replacement of single pole and neutral sheet metal enclosure with atwo Pin Socket plug and socket with one single pole MCB 240Volts, 20 Amps, capacity complete all as specified and directed by Engineer-in-Charge. |
| 132 | S & F in replacement factory made three phase sheet metal enclosure with aThree Pin Socket plug and socket with one four pole MCB 415Volts, up to 63 Amps rating,10 kA capacity complete all as specified and directed by Engineer-in-Charge. |
| 133 | S & F in replacement MCB, TPN 415 volts,63 Amps capacity complete all as specified anddirected by Engineer-in-Charge. |
| 134 | S & Fin replacement MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified anddirected by Engineer-in-Charge. |
| 135 | S & F in replacement MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified anddirected by Engineer-in-Charge. |
| 136 | S & F in replacement MCCB 4 Pole 415 V fixed type 160 Amps with breaking capacity 16 KA complete all as specified and directed by Eng-in-Charge. |
| 137 | S&F Pluto Panel surface/recess mounted2\"x2\" ,36/40 watt 3 in 1 colourCW/NW/WW in colour LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination including connection up with twin core twisted flexible copper conductior cable with suitable size complete all as specified and directed. |
| 138 | S&F decorative wall mounting strip/Surface mounted round spot/focus light/mirror light CRCA body powder coated in white of capacity 15 watt3 in 1 colour any type complete all as specified and directed by Eng-In-Charge. |
| 139 | S&F LED tube light fittings 1x20Watts, 230 volts surface and wall mounted LED type,extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colourfrom ceiling rose to lightcomplete all as specified and directed by Eng-In-Charge. |
| 140 | S&FLED light fittings 1x12Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colourfrom ceiling rose to light complete all as specified and directed by Eng-In-Charge. |
| 141 | Taking down LED tubelight and refixing after B/R work complete all as specified and directed by Eng-In-Charge. |
| 142 | Taking down ceiling fan/cabin fan and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete (rewinding, bush, bearing, capacitor, twin core, flexible cable will be paid under relevant items) reassembling the ceiling fan complete after greasing, oiling, testing the same & making the fan serviceable of any sweep and re-hanging and connecting up to the ceiling rose complete all as specified and directed. |
| 143 | S&F exhaust fan 300 mm sweep silent type in PVC Body as required at site with B/R work complete all as specified and directed by Eng-In-Charge. |
| 144 | Supply , fixand connecting up Wall mounting fan of size 400mm sweep complete all as specified and directed. |
