|
| 1 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete article complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed. |
| 3 | M & L for RCC(Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed. |
| 4 | M & L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc complete all as specified and directed. |
| 5 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed. |
| 6 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns etcsquare or rectanguar complete all as specified and directed. |
| 7 | M & L forTMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 8 | M & L for TMT steel bars 5mmdia and over, up to and including 10mm diain stirrups spcers and binders complete all as specified and directed. |
| 9 | M & L for Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified complete all as specified and directed. |
| 10 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 11 | M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 12 | Material & Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new/oldworkincluding preparation of existing wall surfaces complete all as specified and directed. |
| 13 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of existing wall surfaces complete all as specified and directed. |
| 14 | M & L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet) in pedding / coping roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 15 | M & L for 16-18mm thick granite stone slab of any type with table rubbed and polished in cooking platforms,window sill and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 16 | Material & Labour for providing and fixing stainless steel (Grade 304) railing /moulded/ orinimantaldoor made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 17 | Dismentling of stone slab or paver tiles of any description or thickness in floor or apron complete all as specified and directed. |
| 18 | M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete. complete all as specified and directed. |
| 19 | M & L for Cement concrete type D-21:4:8(using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 20 | M & L for moorum/red bajri filling in floors or paving laid in layers n. exc 15 cm thick spreading levelled and blinded with earth and rammed including watering complete all as specified and directed. |
| 21 | S&F rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position including dismentling of old tank and fixing of 20 mm float valve complete all as specified and directed. |
| 22 | Demolition of cement concrete in ground floor and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M & L for 75 mm thick cement concrete 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 24 | M & L for 100 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor /Pavingfinished even and smooth without using extra cement complete all as specified and directed. |
| 25 | S & F in repair Pillar taps 15mm fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed. |
| 26 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white)excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 27 | S&F in repairs white vitreous china orissa pettern of size 580mmx440 mm white with integral footrest excluding flushing cistern complete all as specified and directed. |
| 28 | S&F in repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 29 | S&F in repair vitreous china urinal half stall type white excluding flushing cistern flush pipe and waste pipe complete all as specified and directed. |
| 30 | S&F in repair Vitreous china WHB550x400mm including cutting pinning in end of brackets brackets , fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed. |
| 31 | S & F fancy type stainless steeldraphery rods with brackets 20-25mm bore including stop roller lid and knobs etc cut to length as required of colour as selected & directed complete all as specified and directed. |
| 32 | S & F in repair for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm,fancy type, chromium plated fixed complete all as specified and directed. |
| 33 | S & F in repair for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 34 | S & F in repair Chromium platedtoilet paper holderincluding fixing arrangement complete all as specified and directed. |
| 35 | S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed. |
| 36 | S & F in repair for fency type chromium plated Stop valves,(angle Cock) cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed, 15 mm fixed complete all as specified and directed. |
| 37 | S & F in repair for Gun-metal, globe or gate valves, with lever head/iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed. |
| 38 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 39 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed. |
| 40 | S & F in repair 600mmx450mm mirror of selected quality glass, mounted on 5mm thick pvc board and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and directed. |
| 41 | S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and directed. |
| 42 | S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed. |
| 43 | S&F in reapir Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 44 | S & F in repair Towel Rail 600mm long of SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed complete all as specified and directed. |
| 45 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed. |
| 46 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed. |
| 47 | Supply & laying of CPVC pipes 25 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 48 | Supply & laying of CPVC pipes 20 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors omplete complete all as specified and directed. |
| 49 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 50 | S&FPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls incl clampsand necessary fittings complete all as specified and directed. |
| 51 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 52 | S & F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 53 | S & FPVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. |
| 54 | S&F PVC (SWR) 110mm bore \"T\" equal or unequal complete all as specified and directed. |
| 55 | PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed. |
| 56 | S&F PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed. |
| 57 | M & L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including screed bed 15 mm thick rendering in CM 1:6 complete all as specified and directed. |
| 58 | M & L coloured Glazed ceramic tiles in vertical serfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including 10mm thick rendering in cement mortar 1:4on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed. |
| 59 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed. |
| 60 | Taking down chowket or frame with shutter (without taking of shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed. |
| 61 | Taking down Shutter exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 62 | S & F in repair forstainless steelwire cloth 0.36 mm nominaldia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed. |
| 63 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specificationincluding making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed. |
| 64 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 65 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 66 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 67 | S & F for Factory made solid panel PVC door shutter 30 mm thick (style) wire gauge i.e panel will be wire gauge in lieu of single side prelam PVC sheet panel . The wire gauge shell be wrapped on an additional square 8 mm MS solid tube the wire gauge strightly and tighted firmly, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 68 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk complete all as specified and directed. |
| 69 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed. |
| 70 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed. |
| 71 | S&Falluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 300 mm long etc complete all as specified and directed. |
| 72 | S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and directed |
| 73 | Dismentling of wall and ceiling board (fibre pulp insulation etc or insulation board /slab/blanket any thickness including cover fillets complete all as specified and directed. |
| 74 | M & L for 18mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels with single side Prelam PVC sheet used in-stead of Plain colour sheet as in cupboard, wardrob and similar works etc work to be done at site complete all as specified and directed. |
| 75 | S&F for continuous (Piano) hinge 40 mmbrass bright finish or electro galvanized complete all as specified and directed |
| 76 | Supply and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. |
| 77 | Material and labour for GI frame work seamless ceiling comprising of GI perimeter channel of 00.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.5mm thick having two equal flanges of 15mm each and wed of 45mm suspendedfrom soffit at approx 900mmcemtre to cemtre with GI cleat amd stee; expasoion fasteners with and including ceiling section (not 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 78 | Material and labour for Moulding as in cornices ,picture rails and the like exc 6 and n. exc 13 cm complete all as specified and directed. |
| 79 | S&F for ball catch with 8 mm dia steel ball and brass body and striking plate including letting and fixed complete all as specified and directed. |
| 80 | Dimantling of PVC fibre roofsheeting, corrugated or semi corrugatedor similar pattern roof coverings complete all as specified and directed. |
| 81 | Dimantling asbestos cement sheeting, corrugated or semi corrugatedor similar pattern roof coverings complete all as specified and directed. |
| 82 | M & L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 83 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedt complete all as specified and directed. |
| 84 | Dismantling timber scantlings40 sq. cm and overin section, in any position unframed works complete all as specified and directed. |
| 85 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 86 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 87 | S&F for 5.5 mm thick ordinary glass and glazing with oil putty in squarearea exc 0.50 sqm in each panecomplete all as specified and directed. |
| 88 | S&F for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination colour both sideside balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 89 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of complete all as specified and directed. |
| 90 | Dismantling of rolling shutter of any description and in any position complete all as specified and directed. |
| 91 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc.,complete all as specified and directed. |
| 92 | M&L for point wiringwith 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and includingcontinuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc andmaking good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified and directed. |
| 93 | ~Ditto~ All as per item No. 92 here in before but with one 3 pin, 5 amps, socket outlet on the same board complete all as specified and directed. |
| 94 | ~Ditto~ All as per item No. 92 here in before but with one 3 pin, 5 amps socket outlet on independent board complete all as specified and directed. |
| 95 | Supply and fix in replacement modular switchtype 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed. |
| 96 | Supply and fix in replacementmodular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 moduleflush type, ISI marked complete all as specified and directed. |
| 97 | Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 98 | Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexiblecopper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 99 | Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 100 | Supply and fix in replacement LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. |
| 101 | Supply and fix in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 102 | Supply and fix in replacement LED lamp 9W LED bulb,230 Vcomplete all as specified and directed. |
| 103 | S&F in replacement sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 104 | S&F in replacement MCB Single Pole and Neutral 240Volt, 40 Amps, \"C\"series,10KA breaking capacity complete all as specified and directed. |
| 105 | S&F in replacement MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified and directed. |
| 106 | Taking down old unserviceable DBs/Main switches/earth plug socket any type/size complete with all accessories and remove from site complete all as specified and directed. |
| 107 | Earthing complete for various equipments with galvanised steel earth plate electrode600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.Iwire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 108 | Supply, laying, testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated, including cable root indicator and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed :- |
| 109 | 2 core x 10 sqmm |
| 110 | 2 corex 6 sqmm |
| 111 | Supply, installing, testing & commissioning factory made(CPRIapproved ) outdoor type, floor mounted LT panel board cubical type suitable for 415 volts 3 phase 4 wire 50 c/s AC supply system having bus bar chamber with insulated copper bus bar of rating 600 amp for phase & neutral, installed on porcelain insulators the panel shall be dust & vermin proof IP 65class protection & made of 3.15 mm CRCA MS sheet and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outer surface and painted inside with two coats of red oxide primer front ,Double door with both side opening including Neoprene Rubber Gasket, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc opening type including internal wiring with PVC insulated solid copper conductor cable 1100 volts grade of appropriate size (but not less than 6sqmm) Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation including complete all as specified and directed of the following:- BUSBAR :-(i)400 Amps rated aluminiumbus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulatorbus bar support (Square/round) insulators of suitable size and good insulation resistanceItem No. 109 Contd......../- |
| 112 | Item No. 109 Contd......../-(a) Incoming(a)MCCB 250 Amps,4 pole 25 KA, rotary handle,Adjustable thermal & fixed magnetic setting (Incoming)- 01 No.(b)Digital Voltmeter 3 PhaseClass-1 50Hz - 01 No. (c)Digital Ammeter3 Phase Class-1 50Hz - 01 No.(d) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, G phase - 01 set.(e) Copper wound with CTR 600/5 - 03 Nos(b) Outgoing (i) MCCB 100 Amps,4 pole 25 KA, rotary handle,Adjustable thermal & fixed magnetic setting (Outgoing)- 04 Nos.(ii) MCCB 4 Pole 40/63 Amps,25 KA at 415 volts- 02 No.(iii) Indicator Lamps (LED type) for R,Y, B phase - 03 set(iv) Auto control time switch, timer controlfor different 24 hours adjustable type including power contractor ofratedcapacity complete - 02 Nos.(v)Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. |
| 113 | Supply & fixing in repair for LED post top lantern 40/45 watt light fitting made of cast aluminium spigot housing with decorativeacrylic diffuser with IP 65/66 rating protection complete with all accessories fixed on GI pipe 50 mm dia complete all as specified and directed. |
| 114 | Supply & fixing in repair Integral decorative 10 watts LED bollard light with IP 65/66 rated protection with necessary electrical connections with adequate size of Nuts and Bolts , complete all as specified and directed. |
| 115 | Supply & fixing in repair LED Solar street light fitting 40 Watt with120 lumen/watt with in built, lithium ion LiFePO4 12.8 volts , 30 Ah battery, solar panel with MPPT charge controller,with dusk dawn sensor including galvanized steel pole of length 6/7 mtrs with all connected accessories like nuts bolts clamps etc with PCC base foundation (1:2:4) complete all as specified and directed. |
| 116 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 25 X 4 mmby means ofnut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following complete all as specified and directed. : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 117 | Supply & fixing in repair for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire lens type with high power LEDs as light source and SPD electronic driver of capacity 70/75 watts with min 100 lumen /watt with pre wired andnecessary mounting arrangements and provision of 6 sq mm twin core aluminium conductor cable multi stranded from fitting to over head line and testing complete all as specified and directed. |
| 118 | Supply & fixing in repair junction box made out of polycarbonate with IP 65 protectionfor cable size suitable for upto 16 sqmm having terminals for termination of cable with necessary nuts and bolts, including -02 Nos polycarbonate cable gland, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete all as directed. |
| 119 | M&L for PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete andpilasters, buttresses columns, postsetc complete all as specified and directed. |
| 120 | Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type ofsoilcomplete all as specified and directed. |
| 121 | M&L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 122 | M&L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 123 | Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified & directed. Note : Punned thickness of sand shall be measured & paid complete all as specified and directed. |
| 124 | Supplying and laying unreinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 125 | Taking down old unserviceable Cableany type/sizefrom site complete all as specified and directed. |
| 126 | Taking down carefully external / street light fittings along with all connected accessories complete all as specified and directed. |
| 127 | Taking down & dismantling old unserviceable Electric Panel any type/size with all connected accessoriesfrom sitecomplete all as specified and directed. |
| 128 | Schedule of credit of Amount Rs.1,03,677.00 to be deducted during AOC. |
