Name of Work: वार्ड न० ७ पुरानी बाजार रोड से डीह बाबा से मंदिर के आगे तक इंटरलॉकिंग निर्माण कार्य
Sl. No.
Item Description
1
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing,removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. MoRD Spec. 300 Chapter 11 Sl.No. 11.1
2
Providing & laying in position cement concrete in 1:5:10 (1 cement: 5 fine sand derived from 2 natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. (2023) CODE. 4.1.11
3
Brick masonry work in 1:4 cement mortar in foundation complete excluding pointing and 3 plastering, as per drawing and Technical Specification Clauses 600, 1202 & 1203. MORD Spec. 600 & 1200 II Chapter 11 Sl.No. 11.5 (2)
4
Providing laying spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness hand packing-rolling with 3-wheeled smooth roller 80-100 KN in stages to proper grade and camber applying and brooming requisite type of screening/binding materials to fill-up the interstices of course aggregtate watering and compacting to the required density grading 3 as per Technical Specification clause. MoRD Spec. 405 Chapter 4 SI.No. 4.7
5
Providing and Laying of interlocking concrete block pavement having thickness 80 mm as per drawings and technical specification clause MoRD Spec. 1504 Chapter 6 SI.No. 6.7
6
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).D.S.R. CODE. 4.1.3
7
Providing concrete for plain / reinforced concrete in open foundations complete as per drawinggs Clauses 7 and technical specifications 802,803,1202&1203. MoRD Spec. 800 & 1200 Chapter 11 SI.No. 11.4
8
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202. MoRD Spec. 1000 & 1200 Chapter 11 SI.No.11.7
9
Plastering with cement mortar (1:4), 12 mm thick on brickwork in sub structure as per Technical Specification Clauses 613.4 & 1204. MORD Spec. 600 Chapter 12 SI.No. 12.3
10
Supply and Laying of R.C.C. Hume Pipes 350mm NP-3 including collrs/spigot & Socketted Type Joint, Conforming to BIS specification as per IS 458:2003
11
Supply and fixing of informatory M.S sign board, size 1.2X0.90m made of 18mm gauge M.S sheet fic in ISA 40X40X6mm, frame support in back side by 40X5mm flat iron on all four side along with to vertical post of2.90mt. Diagonal bracing of size 40x5mm fiat iron, electrically welded and painted with one coat red oxide primer and 2 coat superier quality enamel paint with lettering work of required specified information also l/c fixing in trench both side C.C. 1:2:4 size 0.45 x 0.45x0.50 m Required for proper complation of the work. Reference Specification S.I. No. 502
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
