|
| 1 | DSR/2023/ 2.31 - Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared..(17.60x 0.7418=13.05) |
| 2 | DSR/2023/ 15.2.2 - Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. - Nominal concrete 1:4.8 or leaner mix (including equivalent design mix) (0.7418 X 1503.60 = 1115.37) |
| 3 | (DSR) 2023/ No - 2.8.1 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (260.30x 0.7418=193.09) |
| 4 | DSR/2023/1.1.2 - Disposal of refuse material malwa distance upto 5km etc all complete as the direction of engineer in charge (0.7418 x 326.68= 242.33) |
| 5 | DSR No. 4.1.8 - Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level : 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived fromnatural sources) - (6812x.7418=5053.14) |
| 6 | DSR-2023/5.1.2 - Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (0.7418 x 9045.75 = 6710.14) |
| 7 | DSR-2023/item no. 5.9.2 - Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (842.50 x 0.7418 = 624.96) |
| 8 | AR - Pvc pipe wipe hole pipe etc all comp @ 10.00 m interval. |
| 9 | DSR Code No. 5.22.1 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe-500D or more - (0.7418x107.10=79.45) |
| 10 | DSR-2023/item no.10.25.2 - Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (172.60 x 0.7418=128.03) |
