|
| 1 | Metalic Pontoon design, Manufacturing, supply, Transporatation at site fabrication, erection, launching, commissioning and testing of floating pontoon. Pontoon is sutiable for 2 Nos of Centrifugal Submersible Pump of 40 HP,2 Nos discharge194051 Liters/hr. head 34 M. Pump Qty. 1+1.1) pontoon Size 6 x 5 Mtr. 2) Pontoon lifting lugs 3) chain pully withtrolley of S.T. capacity. 4) Supporting structure for chain pully 5) Safty Railing 6) Anti-skidding top surface. 7) MOC for pontoon - MS IS 2062 Grade - Br E250 8) Epoxy PU RAL 5015 painting of min. 350 Microns on Epoxy Primer of 80 Microns on all metallic surface of Pontoon & Gangway including materials supply, Painting etc complete 9) Hardware- SS304. 10) Covering shed on pontoon.11)Load bearing Frame Structure for Coarse screen as well as marine screen around the whole jetty along with house. 12) 2 Nos Of Centrifugal Submersible Pump Of 40HP having discharge 194051 litters per hours, head 34 meters. |
| 2 | Floating Walkway of 100 m length and 2.0 m Width . To carry the pipes, cables and manpower upto pontoon.1) Epoxy PU RAL 5015 painting of min. 350 Microns on Epoxy Primer of 80 Microns on all metallic surface 2) MOC - MS IS 2062 3) Safty railing 4) anti- skidding top surface |
| 3 | Supply, fabrication, installation and transporation at site of Hull float with 5mm thick plate , winch arrangement, Railing, Epoxy PU RAL 5015 painting of min. 350 Microns on Epoxy Primer of 80 Microns on all metallic surfaceetc., including fabrication charges for Manually operated Service Boat as per approved design and drawings all complete as per requirement and direction of Engineer in charge |
| 4 | G.I. chain 12mm dia to fasten and anchore pontoon and walkways |
| 5 | Mechanical AccessoriesSS wire Braided Flexible pipes 250 mm dia 3 mtr long with MS Flanges (1R X 20 Nos from pontoon to shore) |
| 6 | MS Pipes 250 mm dia. 5.6 mm thick 6 m. long with both ends flanged ( 1R X 1 Nos) ,Hose MOC: SS 304Braiding MOC: SS 304Flange MOC: IS 2062, Class#150 stub end with M20 Bolts & Nuts |
| 7 | MS Specials like enlarger, flanges, bends, manifold/header, flangesdistance pieces, blind plates, MS nutboults and gaskets of all required sizes as per site installations andEpoxy PU RAL 5015 painting of min. 350 Microns on Epoxy Primer of 80 Microns on all metallic surface etc with installation of Air Valve, Sluice valves Reflux Valve,Pressure gauge 0.15 Kg/cm2 ( 2 Nos on pump delivery lines and 1 on header) ( Supply of Valves will be in client scope.) |
| 8 | Electrical Accessories |
| 9 | Junction Box |
| 10 | MCC Control panel comprising of specified MCCB Breakers, Bus Bar, Switches indicating instrumnets having 1 nos incomer and 2 nos outgoing motor feeder for 40 HP pumps with ATS stater necessary capacitors etc to maintain PF upto 98 having 3 nos 63A spare feeders for lighting and other anicillaries required for completion of work in all respect. |
| 11 | LT terminations glands, cable as design requirement and clamps support etcand other anicillaries required for completion of work in all respect. |
| 12 | Preparation of Design & Drawings for fabrication of metallic floating with stability analysis for Jetty & floating pipelines, Pumps & Motors and other equipment\"s etc including printing, vetting of designs & drawings from NAVAL Architects/ IRS/IIT officials etc., |
| 13 | Hiring of Motorised Boat: Hiring of Motorized boat of required capacity for launching of floats for completion of work in all respect |
| 14 | Installation, testing and commissioning in all respect for above items including labour consumables hydra/crane etc required. |
| 15 | Safety Equipment : Safety precautionary arrangements for the Jetty like tyre fenders, safety ropes & life jackets etc. |
| 16 | Tyre fenders |
| 17 | Life Jackets |
| 18 | Provding & Installation of required no of Anchor Block as per design and of required size in M-30 Grade of Concrete for completion of work including all material, labour etc complete. |
