Tender For Addn Altn To Joineries Of Certain Location At Af Stn Lonavla; 1 Taking downchowkats of wooden/steel/aluminium/doors ,windows,ventilations complete with frames and shutters (without taking off the shutters) of area not exc 1.5 sqmcomplete all as specified and directed by Engineer-in-Charge. 2 Taking downchowkatsof wooden/steel/aluminium/doors ,windows ,complete with frames and shutters (without taking off the shutters) of area exc 1.5 sqm and not exc 4.00 sqmcomplete all as specified and directed by Engineer-in-Charge. 3 Taking down doorshutters ofwooden/steel/aluminiumbut exc 1 sqmandnot exc2 sqm eachcomplete all as specified and directed by Engineer-in-Charge. 4 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximumoxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawaltrength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge.Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed by Engineer-in-Charge. 5 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximumoxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawaltrength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge.Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed by Engineer-in-Charge. 6 S&F 30mm thickfactory made wire mesh solid WPC door shutter both side laminated of approved shade/designconsisting of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturers specification & drawings. 7 S&F30 mm thick Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of both side laminated of approved shade/designcomprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately 8 S&F Solid WPC frame (Single Rebated) of approved colour of size 50mm x 75mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheetmetal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be waterproof, termite proof, elegant and should have excellent screws holdingstrength to fix hinges and hold doors properly for a long life) complete all as specified by Engineer-in-Charge 9 S&FFactory Made 24 mm thick 100% Solid WPC ( Wood polymer Composite ) LaminatedFlush door Shutter of required size and colour(one side decorativeother side plain ) comprising of virgin PVCand Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) having good screw holding capacity Minimum Compissive of 50 N/mm2,of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant complete all as specified by Engineer-in-Charge. 10 S&F 300mm longstain less steel SS-304 heavy grade designer sliding door boltwith hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed with door complete all as specified by Engineer-in-Charge 11 S&F 100mm stain less steel SS-304 heavy grade designerbutt hinges medium weight complete all as specified and directed by Engineer-in-Charge 12 S&F150 mmstain less steel SS-304 heavy grade designer tower bolts extruded section fabricated type in any position complete all as specified and directed by Engineer-in-Charge. 13 S&F150 mmstain less steel SS-304 heavy grade designer handles extruded section fabricated type in any position complete all as specified and directed by Engineer-in-Charge. 14 S&F Solid PVC frame (Single Rebated) ofsize 60mm x 30mm made out of solidPVC foam with homogenous finecellular structure having smoothouter integral skin with suitable metalstiffner and fixed with 100 x 8 sheetmetal CSK screws complete all asspecified and as shown on drawing(Note :- Door frame shall be waterproof, termite proof, elegant andshould have excellent screws holdingstrength to fix hinges and hold doorsproperly for a long life) complete all as specified by Engineer-in-Charge 15 S&F18mm thickPVC Prelaminated solid factory made kitchen cabinet &cub board shutter with frameofapproved colour /shade quality and make made from PVC one side pre laminated sheet .The exposed edges shall be sealed with PVC edges beading of same shed and colour, the shuttershall be fire retradent having necessary screws & sliding chennals forholding capacity,Shutter shall be fixed to frame using approved hinges with necessary stain less steel screws,etc complete all as specifiedand as directed by Engineer-in-Charge. 16 S&F 75 mm stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge 17 S&F 150 mm long Extruded brass handles, fabricated type polished Complete all as specifiedand as directed by Engineer-in-Charge by Engineer-in-Charge. 18 S&F Magnetic cather for cupboard fixed with fixing arrangement complete all as specified by Engineer-in-Charge . 19 S&F 20mm dia Stain less steel rod with bracketsfixing in cupboard complete all as specified by Engineer-in-Charge. 20 Cutting holes in brick walls exc. half brick but not exc. one brick in cement mortar or cement lime mortar and stone/concrete wallsfor inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required(depth of embedded portion of hold fastsor lugs measuredfrom the face of the jamb in to the wall) complete all as specified by Engineer-in-Charge. 21 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work sliding arrangement framefor doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/eoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 22 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing offittings wherever required including the cost of EPDM rubber/neoprene gasket requiredwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/, and in cludingas suitable hinzes stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. 23 S&F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. 24 S&F aluminiumpowder coated push button locking arrengements as per required sizes of aluminium sliding windows ,ventilation etc complete all as specified by Engineer-in-Charge 25 S &F, aluminium alloy wire cloth,0.45 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beedingcomplete all as specified and as directed by Engineer-in-Charge. 26 S &F, in repair aluminium alloy wire cloth,0.45 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beedingcomplete all as specified and as directed by Engineer-in-Charge. 27 S&F 4.00 mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panecomplete all as specified and as directed by Engineer-in-Charge . 28 S&F 3mm thickhigh qualityduarable acrylic panel sheet and glazing with rubber beadings ,clips etc complete all as specified by Engineer-in-Charge 29 S&F 5.00 mm thickness Sheet glass, ordinary qualitywith obsecured or frosted ,on one sidewith oil putty in square exc 0.5 sq. m in each panecomplete all as specified and as directed by Engineer-in-Charge . 30 S&F Powder coatedanodised aluminium ventilator louverd typeshutters,(powder coating of any colour thick ness not less than 50 micron )without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws,loking arrangementsand including 4mm thick frostred glassetc complete all as specified and as directed by Engineer-in-Charge 31 Material and labour for machine cutgreen marblework 18 to 20mm thick (table rubbed andpolished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including backing coat of rendering 10 mm thick in CM 1:4 and including taking down plaster of window cills,jambs etc complete all as specified and as directed by Engineer-in-Charge 32 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, andother similar situations complete all as specified by Engineer-in-Charge 33 Supply and fix 100 mm size mortice lock with four lever (vertical type) brass body and fixed complete all as specified by Engineer-in-Charge. 34 Supply and fix door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed by Engineer-in-Charge. 35 S&F Double action floor springhydraulically regulated madeup of minimum 1.25 mm thickaluminium alloy sheetfoundation box, main bodywith stainless steel cover,governing pivot made of brass,other parts made of mild steelheavy duty and fixedcomplete all as specified by Engineer-in-Charge. 36 Dismantling wrought or mild steel work of any description not otherwise provided forcomplete all as specified by Engineer-in-Charge. 37 Material and labourfor framed work ornamental and intricated designsuch as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe290 Gde E-165 ,complete all as directed by Engineer-in-Charge 38 Material and labour for preparation of newsteel surface, of any description, not otherwise described, over 10 cm in width or girth and applying two coats ofAnti corrosive paint (Epoxy ) over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. 39 Material and labour for preparation of oldsteel surface, of any description, not otherwise described, over 10 cm in width or girth and applyingtwocoats of Anticorrosive paint (Epoxy)paintcomplete all as specified and directed by Engineer-in-Charge. 40 S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual typecomplete all as specified by Engineer-in-Charge 41 S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handlecomplete all as specified by Engineer-in-Charge 42 S&F Ball bearing for rolling shutters complete all as specified 43 S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified by Engineer-in-Charge 44 S&F 150mm Floor door stopper of bassbody and tongue with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge. 45 S&Fin repairStainless steel High-quality stainless steel curtain rods 25 mm bore SS -304 withdecorative brackets, stops, complete all as specified and directed by Engineer-in-Charge. 46 Dismentling wall and celing boards (fibre,pulp,insulation ,etc) or insulation boards/blankets,any thick ness including cover fillets all as specified by Engineer-in-Charge. 47 S&F Arm Gyp-FB ceiling snow Frost vinyl face, washable metallized polyester foil backing ,vinyl covered edges, suspended ceiling on suspension system. Panels shall be of Size 600 mm x 600 mm x 9 mm, having 7 kg/SQM,including providing Grid system for fixing ceiling tiles shall comprise of suspension system with true horizontal level, suspended on inter locking tegular “Select” system with 15mm black flanges incorporating a 4mm central reveal in black colour and a load carrying capacity of minimum 14.50 kg/m2 with birdsmouth notches metal grid of hot dipped galvanized steel sections consisting of main T runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 15mmx25mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main T at 600 mm center to center to form a grid of 1200mmx600 mm and secondary cross T of length 600 mm and size 15mmx25mm made of 0.30 m thick (minimum) sheet to be interlocked at middle of the 1200mmx600 mm panel to form grids of 600mmx600mm and wall angle of size 20mmx15mmx0.3 mm and laying false ceiling tiles of approved texture in the grid including, required fitting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 15 mm of all T-sections all complete for all heights as per specifications, drawings incl dismantling of old ceiling, all as specified and directed by Engineer-in-Charge. 48 Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engineer-in-Charge. 49 S&F glazed ceramic coloured tiles (300mmx 450mmx7 mm) in vertical surfacesjointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc over 10 mm thick backing coats of cement plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge. 50 M&Lfor non Skid ceramic coloured tiles 7 to 8 mm thick (desined pattren) (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in CM (1:6)for laying floor tiles complete all as specified and as directed by Engineer-in-Charge. 51 Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified by Engineer-in-Charge. 52 M&L for rendering 10 mm thick cement plaster in CM 1:6on brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified by Engineer-in-Charge. 53 M&L fornew plastered surface of wall,applying two coat of oil emulsion distember with preparation ofalkali resistanceprimer paintover two coats of white cement based wall care putty smooth finish etc of approved make & shadecomplete all as specified and as directed by Engineer-in-Charge.
