Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #51393604

Tender For Repair To Water Proofing Treatment For Roof Slab External Walls Crack Filling In Certain Buildings In South Side And North Side Of Hansa Technical Area Wardroom Area Etc Under Age Br I Of Ge Nw Vasco

Issued by Statutory Bodies & Commissions/Committees · vasco, Goa
Tender Value
45 Lakhs
Estimated cost
Bid Submission
14 Oct 2025
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
vasco → Goa
EMD Exemption
Available
Quantity
Not Available

Project Description

Repair To Water Proofing Treatment For Roof Slab External Walls Crack Filling In Certain Buildings In South Side And North Side Of Hansa Technical Area Wardroom Area Etc Under Age Br I Of Ge Nw Vasco

BOQ

NAME OF WORK : REPAIR TO WATER PROOFING TREATMENT FOR ROOF SLAB, EXTERNAL WALLS, CRACK FILLING IN CERTAIN BUILDINGS IN SOUTH SIDE AND NORTH SIDE OF HANSA TECHNICAL AREA, WARD ROOM AREA ETC UNDER AGE B/R – I OF GE (NW) VASCO. (Tender ID NO. 2025_MES_732061_1)
Sl. No. Item Description
1M & L forgunniting exposed concrete surfaces of beam, column and slabs with one layer of complast spray set modified concretein proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations :-
240 mm thick in columns
330 mm thick in beams
420 mm thick in slabs/ceilings
5S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dianot exc. 4 Kg/sqm complete all as specified and as directed.
6M & L for removing the spalled concrete upto the sound core level and clean reinforcement with wire brush to remove loose scales, cleaning of the surface with wire brush and plenty of water so as to remove the loose particles, dust, laitance etc, remove the rust by using rust remover of approved make Apply passivator coat using zinc primer of approved make on reinforcement bars.Apply bond coat using \"Epoxy bonding agent\" on entire surface, when bond coat becomes tacky apply repair mortar (mortar to be prepared by adding 20% Dr. Fixit Pidicrete MPB or equivalent to 1:3 cement sand mortar) at a thickness upto 15mm and subsequently built up the required thickness in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industries Ltd or Equivalent in M/S Krishna Conchem Products/ STP Ltd. Note- Universal polymerised repairs mortars single pack like pagel U40 or Dr fixit micro concrete may also be used
7Taking down cement plastering at any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
8M & L for rendering 15 mm thick in CM 1:6 on concrete solid blockwall internalsurfacefinished even and smooth without using extra cement complete all as specified and as directed.
9M & L for Rendering 5 mm thick cement plaster on ceiling in CM 1:3 finished to even & smooth w/o using extra cement complete all as specified and as directed.
10M & L for Rendering 15 mm thick cement plaster on concrete solid block walls in two coatsfirst coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid separately.
11Supply only water proofing compound.
12M&L for preparing new plastered wall surfaces and applying twocoat ofOBD over applied alkali resistance priming coat @ 0.90 liter/ 10sqm, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed.
13M&L for preparing new plastered ceiling surfaces and applying two coats of OBD over applied alkali resistance priming coat @ 0.90 liter/ 10sqm, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling complete all as specified and as directed.
14M & L for preparing new plastered surfaces of walls and applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10sqm all as specified and as directed.
15Dismantling/Taking out existing hessain base felt of any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing dust, dirt and washing the roof and removing the dismantled debris to a distance exceeding 200 m but not exceeding 3000m spread and levelled as directed by Engineer-in-Charge.
16M&L for 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over rooftop surface incl filling all cracks by forming groove of 5mm x 5mm finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid separately.
17M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cementand sand slurry 1:3 complete all as specified and directed.
18M&L for applying the primer Dr. Fixit Primeseal as specified maintaining 2:1 diluted ratio. The substrate during application of primer to be in SSD condition. Providing & Applying microfiber reinforeced acrylic based flexiblewaterproofing coating Dr Fixit New coat of M/S Pedilite industries Ltd having properties (Elongation at break-80%, Tensile strength-1.2n/mm2, Adhesion strength -1n/mm2). Apply 1st coat of Dr FixitNew coat at the rate 2Sqm per Ltr.The second and Third coatof Dr fixitwith the same application coverage to achieve DFT of 1 mm. Drying time between each coats will be 6 to 8 hrs. Air cure the coating for 7 days before water pound test complete all as specified and directed.
19(i) The item rate inclusive of all materials, wastage, Labours, T & P, Scaffolding etc. in quoted rate.(ii) The work shall be executed directly by manufacturer of their authorised applicator.(iii) The application shall be authorised in writing by company and guarantee of work executed shall be owned by Contractor or manufacturer.(iv) The complete application is covered with 10 years water proofing warranteeby Contractor/manufacture (v) The contract agency is liable to rectify any defects noted within said warranteeperiod without any extra cost paid by department.
20M&L for applying evenly & priming concrete / plastered surface bituminous primer at 0.5 Kg per sqm for water proofing treatment complete all as specified and as directed.
21M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application completed all as specified.
22M&L for Surface Preparation, Cleaning the surface, removing the laitance, greese, old paints, contaminants, moss etc. with wire brush / high preesure jet. Damaged or loose plaster to be replaced & repaired with polymer modified cement-sand mortar with Dr. Fixit Pidicrete URP. Small cracks upto 5mm needs to be repaired with crack filling material Dr. Fixit Crack X and the cracks above 5mm shall be repaired by polymer modified mortar with Pidicrete URP complete all as specified and as directed.Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.
23M&L for applying Dr. Fixit Primeseal – primer for the exterior coating composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium as per manufacturers\" recommendation. The material shall meet the requirement of ASTM D 1227 – 87, Type III standard complete all as specified and as directed.Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.
24M&L for applying 2 coats of Dr. Fixit Raincoat Classic, high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides coating. It is used as a waterproofing & protective coating for exterior walls of the buildings. The system composed of a single coat of Dr. Fixit Raincoat Waterproof Coating, followed by a single coat of Dr. Fixit Raincoat Classic top Coat to achieve a total DFT of 180 microns. The system shall comply to: Elongation: 100% as per ASTM D 412, Tensile strength: 2.5 Mpa as per ASTM D 412, Water resistance as per SS 500, crack bridging capacity: 2mm as per EN 1062 part 7, Hydraustatic pressure: 7 Bar as per DIN 1048, Anti-carbonation complying as per EN 1062 part 6, RCPT: low as per ASTM C 1202 complete all as specified and as directed.Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.
25M&L for SIKA Bit® W-1 (Red or Grey powder) polymer modified cementitious adhesive over prepared concrete surface with mixing ratio of 8.75 ltrs of clean water per 30 Kg bag of SIKA Bit® W-1 with consumption of 2-3 Kg/Sqm complete all as specified and directed by Engr-in-charge.
26M&L forSIKA Bit® W-15, 1.5 mm thick (with 10% variation) double sided modified bitumen water proofing membraneconsisting of cross laminated PE film and two modified bitumen layers covered with transparent release liners complete all as specified and directed by Engr-in-Charge.
27Dismantling plain or corrugated steel sheeting any gauge, thickness in roof coverings complete.
28S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall of building /Hangar, fixed with self tapping screws complete all as specified and as directed.
29Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
30Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete.
31S & F 150 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
32Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.
33S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe 410-Wincluding cleats, distance pieces etc complete all as specified and as directed.
34Dismantling Wall and ceiling boards/ wall lining (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets/ paneling, any thickness, including cover fillets complete all as specified and as directed.
35Providing & Fixing of Armstrong or equivelantMineral Fibre Acoustical Suspended Ceiling System with ANF (Board) edge tiles with Armstrong 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 34%.The tile shall be laid on Armstrong Prelude38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or equivelant approved make complete all as specifed and directed. Note : The manufacture warantee period is applicable forTile & Grid system used together and the contract agency shall lible to rectify any defects noted during said warrantyperiod.
36Dismantaling water tanks and removing to storeexc 250and n.exc 500 ltrs complete.
37Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete.
38S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in positioninc 20mm bore PVC float valve all as specified and directed in SSR Pt I complete all as specified and as directed.
39S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in positioninc 20mm bore PVC float valve all as specified and directed in SSR Pt I complete all as specified and as directed.
40Disconnecting existing tanks of capacity exc 250 and n exc 500Ltr setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and as directed.
41Disconnecting existing tanks of capacity exc 500 and n exc 1000Ltr setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and as directed.
42Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and as directed.
43Ditto as the item No. 38.00 mentioned above but of 25 mm dia.
44Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20mm complete all as specified and as directed.
45All as the item No. 40.00 but of 25 mm dia complete.
46S&F Ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fix complete all as specified and as directed.
47Demolition of stone / boulder / concrete Block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
48M&L Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6 complete all as specified and as directed.
49M & L for preparation of old surface including sealing cracks, joints of wall / cornices and pillasters etc andapplying one coat of acrylic antifungal paint alongwith suitable pigment on wallcomplete all as specified as per manufacturer instruction and as directed.
50M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth complete all as specified and as directed.

AI Tender Summary

OUR REF NO 51393604
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45 Lakhs
LAST DATE 14-10-2025
Authority
Authority Name Military Engineer Services
Work Description Repair To Water Proofing Treatment For Roof Slab External Walls Crack Filling In Certain Buildings In South Side And North Side Of Hansa Technical Area Wardroom Area Etc Under Age Br I Of Ge Nw Vasco
Basic Detail
Tender No 8697/E8
Bidding Type Tender
Location
City vasco
State Goa
Key Dates
Publish Date 23 Sep 2025
Submission Date 14 Oct 2025
Open Date 16 Oct 2025
Finance
Tender Value 45 Lakhs
Tender Fee 500
EMD 90000
Exemption Available
Document List
8697TenderDocumentsRoofSo_1.pdf
BOQ_819825.xls
Tendernotice_1.pdf
d6e86c08-d256-44b8-bb4b-d64ebf246b27.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 23, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 14, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 16, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

8697TenderDocumentsRoofSo_1.pdf

xls

BOQ_819825.xls

pdf

Tendernotice_1.pdf

html

d6e86c08-d256-44b8-bb4b-d64ebf246b27.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender