|
| 1 | TABLE 900 X 600 (3x2) WITH / WITHOUT DRAWER:- |
| 2 | (a) Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board BWR type Gde-I 19mm thick as per Drg of Make-Archid/Novapan /Greenply /Kitply ISI Marked with IInd class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc). |
| 3 | (b) All as per item 1(a) here in before butS&Fin repair new table frames long rail made out of IInd class hard woodcomplete all as shown on drawing and as directed by Engr-in-Charge. |
| 4 | (c) All as per item No 1.01 (a) above but S & F in repair new drawer made out of IInd class hard wood (TeakWood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge. |
| 5 | (d) All as per item 1(a) above but S&F in repair new table frames short rail made out of IInd class hard woodcomplete all as shown on drawing and as directed by Engr-in-Charge. |
| 6 | (e) All as per item No 1 (a) above but S&F in repair new bottom centre stiffener made out of2nd class hard wood complete all as shown on drawing and as directed by Engr-in-Charge. |
| 7 | (f) All as per item No 1 (a) above but S&F in repair new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. |
| 8 | (g) Supply and fixingin repair new legs made out with IInd class hard wood as per existing or as per Drg,polishingwith French polish (two or more coats) over a coat of wood filler after preparation of surface etc complete. |
| 9 | REPAIR TO CHAIR WRITING ;-Opening of joints of damaged/broken member of chair writing/ CBA where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-charge |
| 10 | (a)S&F in repair front leg (left or right ) made out with IInd class Hard Wood sizeand shape as per existing chair or as per Drgall as directed by Engineer-in-Charge. |
| 11 | (b) All as per item No 2.01(a) above but rear leg (left or right) all as directed by EIC. |
| 12 | (d)All as per item 2.01(a) above but back Stiffener |
| 13 | (e)All as per item 2.01(a) above but bottom stiffener |
| 14 | (f) S&F in repair front Arms rest made out with IInd class Hard Wooden of size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge. |
| 15 | (g) All as per item item No 2.01 (a)here in before but replacement of shoes with new PVC PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. |
| 16 | (h) Re canning of chair writing as per existing size/pattern of cane all as directed by Eng-in-Charge |
| 17 | REPAIR TO CHAIR DINING ;-Opening of joints of damaged/broken member of Chair Dining where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-charge |
| 18 | (a)S&F front leg (left or right ) made out with IInd classHard wood of size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge. |
| 19 | (b) All as per item No 3(a) above but rear leg (left or right) |
| 20 | (c )-Ditto- all as per item No 3.01 (a)but S&F of Front/Rear/Side rail of Chair Dining all as directed by EIC. |
| 21 | (d )-Ditto- as per itm No.3 above but back members of Chair Dining |
| 22 | (e) Description all as per item 3 (a) here in before but replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. |
| 23 | (f)Re-canning of chair dining as per existing size and pattern as directed by Eng-in-Charge. |
| 24 | REPAIRING TO CHAIR EASY ;- Opening of joints of damaged/broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-charge |
| 25 | (a) Re-canning of chair easy |
| 26 | (b) S&F front leg (left or right ) made out with IInd class Hard Wood of size and shape as per existing Drgall as directed by Engineer-in-Charge. |
| 27 | (c )Ditto as per item 4 (b) above but Rear leg (left and right) |
| 28 | (d )Ditto as per item 4 (b) above but Arms rest |
| 29 | (e)Ditto as per item 4 (b) above front rail for seat |
| 30 | (f)Ditto as per item 4 (b) front rail for back |
| 31 | (g) Description all as per item 4 (a) here in before but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. |
| 32 | TABLEWRITING :- |
| 33 | (a) Removing old unserviceable top and S&F new tops made of particle board 18 mm thick commercial BWR Gde I of the size and shape a per Drgwith IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc. |
| 34 | (b) Removing of old unserviceable back ply of table writing and S&F new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing . |
| 35 | (c) Opening joints removing old unserviceable legs of tables & S&F new legs made out with IInd class hard wood all as per Drgor of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc. |
| 36 | REPAIR TO TEAPOY WOODEN |
| 37 | (a) Removing unserviceable top of teapoys/Teapoy FD and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drgand polishing with French polish (two or more coats) over a coat of wood filler etc. |
| 38 | (b) Removing unserviceable/broken stiffener/long rail /side rails of teapoys & S&F new stiffener/long rail /side rails made of IInd classhard wood all as per Drg or existing pattern polishing withfrench polish (two or morecoats) over a coat of wood filler after preparation of surface etc. |
| 39 | (c) Removing unserviceable legs of teapoys & S&F new legs made of IInd classhard wood all as per Drg or existing pattern polishing withfrench polish (two or morecoats) over a coat of wood filler after preparation of surface etc. |
| 40 | REPAIR TO PEG TABLE |
| 41 | (a) Removing unserviceable top of Peg table and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg and polishing with French polish (two or more coats) over a coat of wood filler etc. |
| 42 | (b) Removing unserviceable/broken legs of peg table and S&F new legs made of IInd classhard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc. |
| 43 | (c)Taking out old unserviceable/broken long rail of frame any size and S&F new rail of IInd classhard wood planned & finishing smooth of existing shape and size complete all asspecified. |
| 44 | (d) Description all as per Item No 7.03 (c) above but short rail |
| 45 | REPAIR TO SIDE BOARD |
| 46 | (a) Removal of old unserviceable/broken existing back of side board and S&F new back ply of6 mm thick commercial plywood of existing size complete all as specified and shown on drawing. |
| 47 | (b) Two magnatic catch spring for shutter. |
| 48 | (c) Removal of old unserviceable/brokenbottom of side board and S&F new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified and shown in drawing. |
| 49 | (d) Removal of old unserviceable/broken shelf of side board andS&F new shelfof IInd classhard wood existing shape and size duly planned and smoothcomplete all as specified and shown on drawing and as directed by Engr-in-charge. |
| 50 | (e) Removal of old unserviceable/broken top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle boardcomplete all asspecified and shown on drawing and as directed by Engr-in-charge. |
| 51 | (f) Removal of old unserviceable/broken existing drawer of side board and S&F new drawer of IInd class hard wood of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shownin drawing.. |
| 52 | REPAIR TO TABLE 900 X 900 X 760MM |
| 53 | (a) Removing of old unserviceable table top and provision of new table top made of prelaminated particle board 18/19mm thick BWR, interior grade including 4 mm thick teak wood beading all aroundthe table top as specified and shown on drawing and as directed by Engr-in-charge. |
| 54 | (b) Removing of old unserviceable leg and S&F new leg of existing shape and size ofIInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge. |
| 55 | (c) Removing of old unserviceable rail andS&F new rail of existing shape and size ofIInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge. |
| 56 | REPAIR TO TABLE DRESSING GENTS |
| 57 | (a)Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position withnew top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all around made to shape fixed in position pasted with 01mm thick laminated sheet on top all as shown on drawing. Specified and directed by the Engr-in-Charge. |
| 58 | (b) -Ditto- but replacement of side with new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6mm thick teak wood beading all around , made to shape fixed in position all as shown on drg, specified and diredted by the Engr-in-charge. |
| 59 | (c) -Ditto- but replacement of bottomwith new12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge complete. |
| 60 | (d) -ditto- but replacement of mirror with new mirror with teak wood frame 5.5mm thick mirrorcomplete all as shown on drawing and directed by Engr-in-Charge. |
| 61 | (e) Description all as per item No. 10 (a) here-in-before but replacement of chromium platedknob 25 mm dia of best qualityand as approved by Engr-in-Charge. |
| 62 | REPAIR TO TABLE DRESSING LADIES |
| 63 | (a) Dismantling, taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any positionwith new top of 18mm thick pre-laminated particle board exterior grade, BWR, made to shape fixed in position withall as shown on drawingspecified and as directed by Engr-in-charge. |
| 64 | (b) Ditto same as item no 11.01 (a) here in before but replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr in charge . (Drg No FD 251/32/FD/MAP-II/07) |
| 65 | (c) Ditto same as item no 11.01 (a)here in before but replacement of unserviceable mirror 5.5mm thick with S&F new 5mm thick mirror as per size and shape of drg. complete frame all as shown in drawing and directed by Engr in Charge (Drg no FD 251/32/FD/MAP-II/07) |
| 66 | (d) Ditto same as item no 11.01 (a) here in before but replacement of frame of legs including four legs of dressing table ladies .(Drg no FD 251/32) |
| 67 | REPAIR TO TEAPOY VARANDAH :-Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all around of the top as specifiedand shown on Drg and as directed by Engr-in-Charge. |
| 68 | REPAIR TO TABLE CENTRE |
| 69 | (a) Taking down old U/S top of table centre with sunmica top and S&F new top of table centre with sunmica topmade of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all around of the top as specifiedand shown on Drg and as directed by Engr-in-Charge. |
| 70 | (b) Removing of old unserviceable long rail of Table Centre & S&F of long rail made as per existing size and shape or as per Drg withIInd classhard wood incl polishing two or more coatsover a coat of wood filler after preparation of surfaces. |
| 71 | (c) Removing of old unserviceable short rail of Table Centre & S&F new side rail made as per existing size and shape or as per Drg IInd classhard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 72 | (d) Removing of old unserviceable leg of Table Centre & S&Fnew leg made as per existing size and shape or as per Drg withIInd classhard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 73 | BED PLYWOOD TOP:- |
| 74 | (a) Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape withIInd classhard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface. |
| 75 | (b) Removing of old unserviceable foot rest of bed & S&F new foot rest made as per existing size and shape or as per Drg withIInd classhard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 76 | (c) Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI marked all as shown in Drg. |
| 77 | (d) Removal of old wooden stiffeners and S&F newIInd class Hard wood stiffeners of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc. |
| 78 | (e) Taking out old unsv long rail of bed plywood and providing of new long rail of IInd classhard wood of existing shape and size all as specified and Drg incl polishingtwo or more coats over a coat of wood filler after preparation of surface etc. |
| 79 | REPAIR TO TABLE DINING 6/8 PERS |
| 80 | (a) Taking out old unsv top from table dining 6 pers and supply& fix new top of18/19 mm thick veneered particle boardsolid core type (1 phase teak veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick all around fixed with suitable size 6 mm thick all around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed. |
| 81 | (b) Description all as per item No . 15.01 (a) here in before but Tabel Dining 8 Pers. |
| 82 | (c) Taking out old unsv legs from table dining 6/8 pers and S&F new legs ofhard wood all as shown on drg and directed by EIC. |
| 83 | (d) Taking out old unsv long rail from table dining 6/8 pers and S&F new long rail ofhard wood all as shown on drg and directed by EIC. |
| 84 | (e) Taking out old unsv short rail from table dining 6/8 pers and S&F new short rail ofhard wood all as shown on drg and directed by EIC. |
| 85 | M&L for preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :- |
| 86 | Bed with ply wood top |
| 87 | Chair writing |
| 88 | Chair Easy |
| 89 | Chair dining |
| 90 | Table 3\"x2\" with or without drawer |
| 91 | Table writing |
| 92 | Side Board |
| 93 | Table 600x600x760mm wooden |
| 94 | Table dressing gents with mirror |
| 95 | Table dressing ladies with mirror |
| 96 | Table centre |
| 97 | Table bed side |
| 98 | Sofa Set (5 Seater) |
| 99 | Sofa Chair Single seater |
| 100 | Teapoy / Teapoy FD |
| 101 | Table Peg |
| 102 | Table dining 4/6/8 Pers |
| 103 | REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHELVES |
| 104 | (a) Removing of old unserviceable 3 waylocking device complete of Almirah Large steel and S&F new 3 way locking devicemade to shape as required and all as specified in drg and as directed by Engr-in-charge. |
| 105 | (b) Removing of existing old locks of Almirah Large steel and S&F new locks of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and as directed by Engr-in-charge |
| 106 | (c) Removing of existing old unserviceablehandles including necessary nut, bolts, washer etc of Almirah large steel and S&F new chromium plated handles including necessary nut, bolts, washer etcall as specified & directed by Engr- in- Charge |
| 107 | (d)Taking out existing shelves and refixing only in position including necessary nuts, bolts, washers, clips etc for Almirah large steel all as directed by Engineer-in-charge. |
| 108 | (e) Removing of old unserviceable legs of Almirah large steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coats ofolive green or silver grey paint over a coat of red oxide primer, all as shown on drawing anddirected by Engineer-in-charge. |
| 109 | (f) Removing ofexisting old unserviceable shelves of Almirah large steel and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coats ofolive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge. |
| 110 | REPAIR TO ALMIRAH MEDIUM STEEL |
| 111 | (a) All as per Srl item No 17.01 (a) here-in-before but Almirah Medium Steel |
| 112 | (b) All as per Srl item No 17.02(b) here-in-before but Almirah Medium Steel |
| 113 | (c) All as per Srl item No 17.03 (c) here-in-before but Almirah Medium Steel |
| 114 | (d) All as per Srl item No 17.04 (d) here-in-before but Almirah Medium Steel |
| 115 | (e) All as per Srl item No 17.05 (e) here-in-before but Almirah Medium Steel |
| 116 | (f) All as per Srl item No 17.06 (f) here-in-before but Almirah Medium Steel |
| 117 | REPAIR TO LOCKER STEEL |
| 118 | (a) Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thickwith appropriate bracket of steel made to shapeas shown on drawing and asdirected by Engineer-in-charge. |
| 119 | (b) Removing of old deshaped/broken Steel shelvs and S&F new MS Steel shelves of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-charge. |
| 120 | (c) Removing of old broken/ unserviceable existing hasp & staples of Locker steel and S&F new Hasp & Staples of size 75x30x2mm,shapeall as shown on drawing anddirected by Engineer-in-charge. |
| 121 | (d) Removing of old broken/ unserviceable existing handle of Locker steel and S&F new handle mild steel chromium plated Make Godraj made to shapeall as shown on drawing anddirected by Engineer-in-charge. |
| 122 | (e) Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat ofOG paint over a coat of red oxide primer, all as shown on drawing anddirected by Engineer-in-charge. |
| 123 | REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/WITHOUT DRAWER |
| 124 | (a) Taking down oldU/S top of table steel 900 X 600 X 760 mm with drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all around of the top as specifiedand shown on Drg and as directed by Engr-in-Charge. |
| 125 | (b)Taking out oldU/Sdrawer and S&F new drawermade of 1mm thick MS Sheet as specifiedand shown on Drg and directed by Engr-in-Charge. |
| 126 | (c) Removing existing unserviceable parts of table 900 x 600x760mm Steel (with drawer)and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 127 | (d) Description all as per item No.20 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality withsuitable size complete all as directed by Engr-inCharge. |
| 128 | REPAIR TO TABLE STEEL 900 X 900 X 760 MM |
| 129 | (a) Removing of U/S top and S & F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side whitewith 4 mm thickT.W. beading all around the table steel 900x900x760mm |
| 130 | (b) Removing existing unserviceable pipe of table 900 x 900x760mm Steel and S&F new pipe made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 131 | (c) Description all as per item No.21 here in before but replacement of rubber shoe with new rubber shoe of superior quality with existing suitable size complete all as directed by Engr-inCharge. |
| 132 | REPAIR TOCHARPOY GI PIPE PLY WOOD TOP |
| 133 | (a) Removing of unserviceable plwood top and supply and fixing 12mm thick ply wood commercial BWR plywood ISI markedand fixing same with three nos of flat iron strip of size 900x32x5/6mm, bolts nuts and washers bolts of size 5x65mm 06 nos round head bolts after dirlling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-charge. |
| 134 | (b)Removing of unserviceable elbow of charpoy GI pipe and s&f three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge. |
| 135 | (c) Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitabkle for charpoy GI pipe 32mm bore Med grade complete all as specified & directed. |
| 136 | (d) M&L for removing the threadless/broken long rails from charpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing . |
| 137 | (e) Taking out existing old broken short rail from charpoy GI32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 22.04(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items. |
| 138 | (f) Taking out existing old broken legs from charpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 22.05 (e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and complete all as specified and directed by engineer-in-Charge. |
| 139 | TABLE OFFICE OFFICER/CLERKSTEEL |
| 140 | (a) Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x900mm 18/19 mm pre-laminated partical board exterior gradewith 4 mm thick teak wood beading all aroundof the top as specified and shown on drg and as directed by Engr-in-Charge |
| 141 | (b)Taking out U/S Top from Table office offrs steel and S&F new topof size 1800x1200mm 18/19 mm pre-laminated partical board exterior gradewith 4 mm thick teak wood beading all around of the top as specified and shown on drg and as directed by Engr-in-charge. |
| 142 | (c )Taking out unserviceable locks and S&F new brass locks after repairing of drawer and cupboard of table office clerk steel size and shape as per Drg as directed by Engr-in Charge.. |
| 143 | (d)Taking out oldU/Sdrawer and S&F new drawermade of 1mm thick MS Sheet as specifiedand shown on Drg and directed by Engr-in-Charge. |
| 144 | M&L for scrubbing and derusting, denting of de-shaped portion and applying two coats ofsynthetic enamel paint (spray painting) over a coat of primer incl preparation of surface all asdirected by EIC for the following :- |
| 145 | (a) Table office clerk steel |
| 146 | (b) Table Office officers steel |
| 147 | (c ) Teapoy varandah |
| 148 | (d)Table 900X600 steel with drawer& w/o drawer |
| 149 | (e) Table steel 900X900mm |
| 150 | (f) Chair CB steel with or without arms |
| 151 | (j) Almirah large steel with shelves & 1/2 H x 1/2 S |
| 152 | (k) Almirah med steel with shelves |
| 153 | (l) Locker steel |
| 154 | (m) Chair Verandah |
| 155 | (n) Bed hard Ply top |
| 156 | (o) Book Case Steel |
| 157 | REPAIR TO CHAIR CB STEEL WIITH/ WITH OUT ARMS |
| 158 | (a)Removing unserviceable seats from steel chair with & w/o Arms and S&F 32mm thick IInd classhard wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and 0.3mm thick for seats and 3 to 3.2mm wide & 0.4mm thick border including supply of cane complete all as directed by EIC. |
| 159 | (b)Ditto-- but steel chair back -do- |
| 160 | (c)Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer |
| 161 | (d)S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair |
| 162 | (e) S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete. |
| 163 | Chair Verandah(a) Re-Canning with existing type/size of plastic cane complete. |
| 164 | REPAIR TO SOFA SET 5 SEATER |
| 165 | a) Removing of existing U/S cushion from sofa set five seater and S&F new foam cushion95 to 100 mm thick 32/40 density duly covered with superior quality tapestry cloth allas directed by Engr-in-Charge. |
| 166 | (b )Removing of existing old tapestry cover from cushion for sofa set five seater and S&F new tepestrycover and tapestry cloth all as directed by Engr-in-Charge. |
| 167 | (c)Removing of existing U/S front/rear rail wooden of sofa set 5 seater and S&F new Front/Rear wooden rail made of IInd classhard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge. |
| 168 | (d)Removing of existing U/S stiffner/bearer wooden and S&F new stiffner/bearer wooden made of IInd classhard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge. |
| 169 | (e)Removing of existing U/S Arm rest wooden and S&F new Arm rest wooden made of IInd classhard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge. |
| 170 | Repair of Chair Executive Revolving LB/MB/HBas shown below :- |
| 171 | (a)Repair and replacement of unsv seat PVC 4\" thick cushion with 40 density with tapestry and fixing with new seat PVC 4\" thick cushion with 40 density with tapesty cloth/synthetic cover. |
| 172 | (b)Repair and replacement of unsv Back Rest PVC 4\" thick cushion with 40 density with tapestry and fixing with new back rest PVC4\" thick cushion with 40 density with tapestry cloth/synthetic cover. |
| 173 | (c)Welding in repair not exceeding 6mm thick MS sheet and not exceeding5 cm in length. |
| 174 | (d)Replacement of old unsv coster wheel with new coster wheel fitted. |
| 175 | (e)Oiling, greasing, and leveling of the revolving system,and render the mechanism serviceable. |
| 176 | (f)Replacement of existing old unsv handle with fitted new handle. |
| 177 | (g)Replacement of existing old unsv base and fixing of new base stainless steel /pvc |
| 178 | (h)Replacement of old unsv hyd cyl with fixing new hyd cylinder |
| 179 | (j)Replacement of existing broken old MS push back Tilting Plate including seat tilt adjuster |
| 180 | Repair Of Sofa Set 3 Seater TP (Branded Make-Durian/ Godrej or equivalent)Replacement of unsv seat and back cushion 4\"\" thick including Tapestry Cover for Cushion with special quality of tapestry for Sofa three seater as per existing or as per sample kept in BSO yard oras approved by GE / Engr - in - charge. |
| 181 | Repair Of Table Centre With Glass TopRemoval of broken Unserviceable glass top from table centre glass top and supply & fixing of new glass top of dimensions with size and shape as per existing glass top with thickness of 10mm. |
| 182 | Repair Of Chair Dining long Back/ Chair Dinning CushionedRemoving the following unserviceble components of chair Dinning long back and replacing the same with new one IIndclass Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing:- |
| 183 | (a) Repair and replacement of front leg (left or right) made out with IInd class Hard wood size and shape as per existing chair or as per Drg complete all as directed by Engineer-in-Charge |
| 184 | (b) All as per item ser No 31.01 (a) above here in before but Rear leg (left or right) complete all as directed by EIC. |
| 185 | (c) All as per item ser No 31.01 (a) above here in before but Side Rail. |
| 186 | (d) All as per item ser No 31.01 (a) above here in before but Front Rail. |
| 187 | (e) All as per item ser No 31.01 (a) above here in before but Bottom stifner |
| 188 | (f) All as per item ser No 31.01 (a) above here in before but Back Rest vertical strip |
| 189 | (g) Replacement of unserviceable cushioned with seat and new seat top of chair dinning with 75 mm thick 32 density foam covered with tapestry cloth not less than Rs 250/- per metere as approved on seat of 12 mm commercial plywood BWP grade including tightening of frame work as shown on drg |
| 190 | (h) Replacement of unserviceable pvc shoes of chair dining with new one with screw of superior quality all as shon on drg. |
