Tender For Repair And Maintenance Of Additional Room At Rw Sub Division Ramnaguda In The District Of Rayagada For The Year 2025 26.
Tender Value
3.98 Lakhs
Estimated cost
Bid Submission
03 Oct 2025
0 days left
EMD
3989
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gunupur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Additional Room At Rw Sub Division Ramnaguda In The District Of Rayagada For The Year 2025 26.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing brick or stone masonry up to 3m height including stacking the useful materials for reuse and ramming the debris with in 50m lead etc with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 2 | Dismantling and removing 2.5cm th grading concrete including stacking the useful materials for reuse and ramming the debris with in 50m lead etc with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 3 | 2.5cm thick grading concrete of proportion (1:2:2) on roof slab with 6mm thick hard black granite chips of approved quality from approved quarry including watering and curing etc.with cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 4 | Providing and fixing Glazed tiles in dados, skirting and rises of steps on 12mm thcement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2\"0\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2\"0\"x2\"0\" with 9 mm thick Prelaminated particle board (Novapan standard type) (I.S.I.) suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 6 | Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 7 | Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 8 | Wall priming one coat with approved primer with brush to wall surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 9 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 10 | Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 11 | Supplying, fitting, fixing of Aluminium door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of joining angle No 1855 including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 12 | Supplying, fitting, fixing of window (sliding type) made up of aluminium section 9778 as windows frame section no.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement, all fittings including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 13 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. |
| 14 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 15 | Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite crusher brokenmetal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
AI Tender Summary
Tender Timeline
Sep 23, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender