Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #51375878

Tender For Repairing Of Centrifugal And Submersible Pump Sets Various Wss Of Under Sub Division Rani (Annual Rate Contract)

Issued by Government Departments · falna, Rajasthan
Tender Value
10 Lakhs
Estimated cost
Bid Submission
06 Oct 2025
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
falna → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender For Repairing Of Centrifugal And Submersible Pump Sets Various Wss Of Under Sub Division Rani (Annual Rate Contract)

BOQ

Name of Work: Repairing of Centrifugal and Submersible Pump Sets Various WSS of under sub division Rani (Annual Rate Contract) (On BSR Approved O&M Jodhpur 2020)
Sl. No. Item Description
1Repairing & Rewinding of Monoblock/ Centrifugal pump set : PART (A): REPAIR AND REWINDING OF MONOBLOCKPUMPS : Rewinding of three phase squirrel cage induction motor ofMonoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),\"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. 3 H.P.
25 H.P.
37.5 HP
410.00 HP
512.5 HP
615.00 HP
717.50 HP
820.00 HP
9SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP). Connection Plates. up to 10 HP
1010 HP to 20 HP
11Cooling Fan. up to 10 HP
1210 HP to 20 HP
13GM/SS bush. Upto 10 HP
1410 HP to 20 HP
15Mechanical reconditioning of Bearing sheet. Upto 10 HP
1610 HP to 20 HP
17Mechanical reconditioning ofImpeller sheet and Key way slot. Upto 10 HP
1810 HP to 20 HP
19Oil seal. Upto 10 HP
2010 HP to 20 HP
21Labour charge for opening and fitting of pump sets. Upto 10 HP
2210 HP to 20 HP
23Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) \"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump setsand transportation to and fro from installation site complete as per direction of engineer in charge at site. Above 15.00 HP but upto 17.50 HP
24Above 17.50 HP but upto 20.00 HP
25Above 20.00 HP but upto 25.00 HP
26Above 25.00 HP but upto 30.00 HP
27Above 30.00 HP but upto 35.00 HP
28Above 35.00HP but upto 40.00 HP
29Above 40.00 HP but upto 45.00 HP
30Above 45.00 HP but upto 50.00 HP
31Above 50.00 HP but upto 60.00 HP
32Above 60.00 HP but upto 75.00 HP
33Above 75.00 HP but upto 100.00 HP
34SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP). Connection Plates. 5 HP to 20 HP
3520 HP to 30 HP
3630 HP to 50 HP
37Above 50 HP to 100 HP
38Cooling Fan. 5 HP to 20 HP
3920 HP to 30 HP
4030 HP to 50 HP
41Above 50 HP to 100 HP
42Fan Cover. 5 HP to 20 HP
4320 HP to 30 HP
4430 HP to 50 HP
45Above 50 HP to 100 HP
46G.M./SS Gland Guide Bush. 5 HP to 20 HP
4720 HP to 30 HP
4830 HP to 50 HP
49Above 50 HP to 100 HP
50Shaft with Sleeve Chuck Nut. 5 HP to 20 HP
5120 HP to 30 HP
5230 HP to 50 HP
53Above 50 HP to 275 HP
54Shaft Chuck Nut. 5 HP to 20 HP
5520 HP to 30 HP
5630 HP to 50 HP
57Above 50 HP to 275 HP
58G.M. Neck Ring. 5 HP to 20 HP
5920 HP to 30 HP
6030 HP to 50 HP
61Above 50 HP to 100 HP
62Bush Shaft Sleeve of G.M. 5 HP to 20 HP
6320 HP to 30 HP
6430 HP to 50 HP
65Above 50 HP to 100 HP
66G.M. Gland Cover. 5 HP to 20 HP
6720 HP to 30 HP
6830 HP to 50 HP
69Above 50 HP to 100 HP
70S.S. Shaft (Non Magnetic). 5 HP to 20 HP
7120 HP to 30 HP
7230 HP to 50 HP
73Above 50 HP to 100 HP
74G.M. Shaft Sleeve Check Nut. 5 HP to 20 HP
7520 HP to 30 HP
7630 HP to 50 HP
77Above 50 HP to 100 HP
78M.S. Shaft Check Nut. 5 HP to 20 HP
7920 HP to 30 HP
8030 HP to 50 HP
81Above 50 HP to 100 HP
82Cooling pipe set with nozzle & Nut. 5 HP to 20 HP
8320 HP to 30 HP
8430 HP to 50 HP
85Above 50 HP to 100 HP
86AIR Cock. 5 HP to 20 HP
8720 HP to 30 HP
8830 HP to 50 HP
89Above 50 HP to 100 HP
90JOB WORK FOR REPAIR OF PUMP MOTOR. Bearing Housing (rebuilding, turning & finishing). 5 HP to 20 HP
9120 HP to 30 HP
9230 HP to 50 HP
93Above 50 HP to 100 HP
94Bearing Cap (rebuilding, turning & finishing). 5 HP to 20 HP
9520 HP to 30 HP
9630 HP to 50 HP
97Above 50 HP to 100 HP
98Impeller Reconditioning for all type of Pump. 5 HP to 20 HP
9920 HP to 30 HP
10030 HP to 50 HP
101Above 50 HP to 100 HP
102Labour Charges for Dismantling & Assembling of Pump. 5 HP to 20 HP
10320 HP to 30 HP
10430 HP to 50 HP
105Above 50 HP to 100 HP
106Coupling with stud and rubber bush. 5 HP to 20 HP
10720 HP to 30 HP
10830 HP to 50 HP
109Above 50 HP to 100 HP
110Supply & Fixing of tyre coupling sets according torelevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. Type 14 Nos. set
111Type 15 Nos. set
112Type 16 Nos. set
113Type 17 Nos. set
114Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. 6304 or equivalent size
1156305 or equivalent size
1166306 or equivalent size
1176307 or equivalent size
1186308 or equivalent size
1196309 or equivalent size
1206310 or equivalent size
1216311 or equivalent size
1226312 or equivalent size
1236316 or equivalent size
1246317 or equivalent size
1256318 or equivalent size
1266319 or equivalent size
127NU319C or equivalent size
128Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding)
129Preventive Maintenance : Routine maintenance of centrifugal coupled pump and motorincluding opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job. 5 HPto 20 HP
13020 HPto 30 HP
131Above 30 HP and up to 50 HP
132Above 50 HP and up to 100 HP
133Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.
134Cleaning of Electric PanelPMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.
135Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. 5 HP to 20 HP
136Above 20 HP and up to 30 HP
137Above 30 HP and up to 50 HP
138Above 50 HP and up to 100 HP
139Submersible Motor Pumps PART(A):FOR REPAIR OF SUBMERSIBLE MOTOR : Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer\"s specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job Up to 3 HP V-6
140Above 3HP to 5 HP V-6
141Above 5HP to 7.5 HP V-6
142Above 7-5 HP to 10 HP V-6
143Above 10 HP to 12.5 HPV-6
144V-8
145Above 12.5 HP to 15 HPV-6
146V-8
147Above 15 HP to 17.5 HPV-6
148V-8
149Above 17.5 HP to 20 HPV-6
150V-8
151Motor opening cable jointing & refitting charges when rewinding is not required. V-6
152V-8
153Schedule of spares and repair of submersible motor : Particulars of spare parts of submersible Motor Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves. V-6
154V-8
155Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing. V-6
156V-8
157Replacement of thrust plate for all types of motors. V-6
158V-8
159PART (B): REPAIR OF SUBMERSIBLEPUMP : SCHEDULE OF SPARES & REPAIR OF SUBMERSIBLE PUMP : Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete. Providing & fixing of GM neck rings parts on impeller. Plain Type V-6
160Bowel typeV-6
161Plain Type V-8
162Bowel typeV-8
163Providing & Fixing of GM/SS bush per piece. Plain Type V-6
164Bowel typeV-6
165Plain Type V-8
166Bowel typeV-8
167Providing & replacement of G.M. Impeller. Plain Type V-6
168Bowel typeV-6
169Plain Type V-8
170Bowel typeV-8
171Providing & replacement of Nylon Impeller. Plain Type V-6
172Bowel typeV-6
173Plain Type V-8
174Bowel typeV-8
175Providing & fixing CI Diffuser/ guide vans per pieceV-6
176V-8
177Providing & fixing Gun metal Diffuser/ guide vans per piece. V-6
178V-8
179Providing & fixing Nylon Diffuser/ guide vans per piece.V-6
180V-8
181Providing & fixing Microlone Guide per piece. V-6
182V-8
183Providing & fixing of CI body per piece. Plain Type V-6
184Bowel typeV-6
185Plain Type V-8
186Bowel typeV-8
187Pump opening & fixing including machining & all finishing work for desired performance. Plain Type V-6
188Bowel typeV-6
189Plain Type V-8
190Bowel typeV-8
191Impeller welding & turning (if not replaced). Plain Type V-6
192Bowel typeV-6
193Plain Type V-8
194Bowel typeV-8
195Single Phase Motor PumpsPART(A):FOR REPAIR OF SUBMERSIBLE MOTOR (SINGLE PHASE) : Repair Rewinding of single phase Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer\"s specification and to the satisfaction of Engineer Incharge. It includes the replacement of bushes (oil seal bush) Nut Bolts, washers, cable seal set, cable gland ring, vent plug, water drain plug, etc. complete. up to 2 HP V-4
196Above 2HP to 3 HP V-4
197Above 3HP to 4 HP V-4
198Schedule of spares and repair of single phase submersible motor : Providing and fixing of spare for Single Phase submersible motor. Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves
199Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing.
200Replacement of thrust plate for all types of motors
201Motor opening cable jointing & refitting charges when rewinding is not required each motor
202Proving & fixing of motor pump coupling housing set
203PART (B): REPAIR OF SINGLE PHASESUBMERSIBLEPUMP : SCHEDULE OF SPARES & REPAIR OF SINGLE PHASESUBMERSIBLE PUMP : Repairing of submersible single phase pump sets. Providing & Fixing of GM/SS bush per piece
204Providing & replacement ofPVC Impeller
205Providing & fixingGM Diffuser per piece
206Providing & fixing Microlone Guide per piece
207Providing & fixing of Bowl per piece
208Pump opening & fixing including machining & all finishing work for desired performance
209Providing & fixingNRV
210Providing & fixingD.O.
211Providing & fixing of S.S. shaftup to 2 HP
212Above 2HP to 4 HP

AI Tender Summary

OUR REF NO 51375878
AUTHORITY Government Departments
TENDER VALUE 10 Lakhs
LAST DATE 06-10-2025
Authority
Authority Name Public Health Engineering Department
Work Description Tender For Repairing Of Centrifugal And Submersible Pump Sets Various Wss Of Under Sub Division Rani (Annual Rate Contract)
Basic Detail
Tender No NIT No 97/2025-26
Bidding Type Tender
Location
City falna
State Rajasthan
Key Dates
Publish Date 22 Sep 2025
Submission Date 06 Oct 2025
Open Date 06 Oct 2025
Finance
Tender Value 10 Lakhs
Tender Fee 1000
EMD 20000
Exemption Available
Document List
9ba951e8-9f7b-4bc6-a50f-8f0d37736b99.html
BOQ_896366.xls
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 22, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 06, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 06, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

9ba951e8-9f7b-4bc6-a50f-8f0d37736b99.html

xls

BOQ_896366.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders