Tender For Construction Of Road And Drain In Krishna Nagar Namrata Awas Ward 19 Nagar Nigam Kota South.
Tender Value
4.60 Crore
Estimated cost
Bid Submission
07 Oct 2025
0 days left
EMD
9.21 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Road And Drain In Krishna Nagar Namrata Awas Ward 19 Nagar Nigam Kota South.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202By Mechanical Means |
| 2 | Construction ofgranular sub-base by providing well graded material, spreadinginuniformlayerswithTractorMountGraderonprepared surface, mixing by mixin placemethod withrotavatoratOMC, and compacting with smoothwheelroller to achieve thedesired density, |
| 3 | Providing, laying, spreading and compacting graded stone aggregate to wet mixmacadamspecificationincludingpremixingthe material withwaterat OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site,laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. |
| 4 | Construction ofun-reinforced, plain cement concrete pavement, thicknessasperdesign,overapreparedsubbase,with43 gradecementoranyothertypeasperClause602.2.2M30 (Grade),coarseandfineaggregatesconformingtoIS:383, maximumsizeofcoarseaggregatenotexceeding31.5mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriateweighbatcherusingapprovedmixdesign,laidin approved fixed Side Formwork(steel channel, laying and fixing of 150 micron thick polythene film, wedges, steel plates including levellingtheformworkasperdrawing),spreadingtheconcrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debondingstrips,primer,sealantnearapproachesto bridge/culvertandconstructionjoints,admixturesasapproved, curingofconcreteslabsfor14-days,usingwaterfinishingto linesandgradeasperdrawing andMoRTHSpecification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately) |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. |
| 6 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 7 | Random rubble dry stone Kharanja under floor. |
| 8 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinthlevel :All work up to plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). |
| 9 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 10 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
AI Tender Summary
Tender Timeline
Sep 22, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 08, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender