|
| 1 | Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises completeall asspecified and directed |
| 2 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etcincluding cleaning off premises where directed |
| 3 | Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc completeall asspecified and directed |
| 4 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed |
| 5 | Takingdownchowkhatsor frame not exc 1.5 sqm eachwithshutters (without taking off shutters from the frames)completeall asspecified and directed |
| 6 | Takingdownchowkhatsor frame not exc 1.5 sq. m but n exc 4 sq m each withshutters (without taking off shutters from the frames) completeall asspecified and directed |
| 7 | Takingdown of existing tarfeltand cement plaster of anydescription and thicknesson rooftopincluding flashing andjunctionof parapetandcleaning existingroof topsurfaceby brooming, wirebrushingincluding removing the debrishout completeall asspecified and directed |
| 8 | Demolition of roofs, any thickness including plastering & leeping (whether full or part)removal of debris at a distance exc 250m but not exc 500m and depositing where directed |
| 9 | Demolition Concrete of any description and in any position not otherwise specifically provided for completeall asspecified and directed |
| 10 | M&L for cement concrete Type B0 (1:2:4) (12.5mm graded stone aggregate ) as in roof padding completeall asspecified and directed |
| 11 | M&Lfor10mmthickrenderingon concrete surface on roof in cementplaster1:3finishedevenand fairwithoutusingextracementby usingliquid WPC@3%of wt of cement content completeall asspecified and directed. Note: Liquid Water proofing Compound measured and paid seprately |
| 12 | Supply only liquid water proofing compoundall as directed |
| 13 | M&L for cutting grooves in brick / stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 completeall asspecified and directed |
| 14 | M&L for water proofing treatment on wall,roof,chajja\"s,gabble walls, edges (atany respective height of bldg ) as followingas manufacturer\"s instructions complete all as specified all as specified and directed(a) preparing plastered surfaces and applyingapproved bituminous primer @ 0.3 Kg/sqm uniformly to receive APP membrane(b) Applyingand stick non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm bytorchapplicationand sideoverlapof 150 mm andoverlapof 150 mm longtitudinally, (c)At thejunctionof roof andparapet walla grooveof 75mm wide and 65mm deep and shaping horizontal of groov with 1:3 with bituminious masticjoints/overlap shallbe sealedwithhotbitumen85/25(d)Applying one coat of aluminium paint on top of the membrane (at any height ) as per manufacturer instructions |
| 15 | M&Lfor providingcementconcrete PCC (1:2:4) type B1 (20mm graded aggregate)as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom sideincluding necessary form work etc completeall as specified and as directed |
| 16 | Dismantling ofPlain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings complete all as directed. |
| 17 | S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with \"L\" type or \"J\" type of cranked hook in lieu ofscrews and washers in roofs, walls etc with grade of zinc coating 275 completeall as specified and as directed . |
| 18 | S&F Galvanised plain mild steel sheeting 0.63mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 19 | S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed Note: Work shall beexecutee in any respective height of building |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 21 | S&Frolled mild steel in Joist, channel, angle, or tee sections,fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-410 (Gde E- 250 ) complete all as specified and directed |
| 22 | S &F in repairs Steel rolling shutters, 1.25 mm thickness of lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type complete all as specified and directed. |
| 23 | M&L for wrought 2nd class hard-wood in scantlingsin repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store completeall as specified and as directed |
| 24 | Dismantling of single layer of manglore/ Similar pattern tiles in roofing complete all as directed. |
| 25 | Dismantling of battens of tiles of any size and description spaced exc 15 cm, including tiling fillets complete all as directed. |
| 26 | M&L for clean sawn ,2nd class H/W tile battens at 30cm centres, exe 5 and n.exe 15 sqcm sectional area completeall as specified and as directed |
| 27 | Ditto all as per item No. 26 above but except battens |
| 28 | M&L for preparing tile battens of any size and spacing andtreated all over (measured overall on one side only spaces not deducted) with two coats of cresoting oil etc completeall as specified and as directed |
| 29 | M&L for providing roof tiles Manglore pattern interlocking at side joints, laid dry (at any height of bldg), completeall as specified and as directed |
| 30 | Ditto all as per item No. 29 above but except tiles |
| 31 | M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM (1:6) completeall as specified and as directed |
| 32 | Ditto all as item No. 31 above, but except tiles |
| 33 | S&F in repairs eaves boards clean sawn in roof 20mm thick complete all as specified and directed. |
| 34 | Takingupor down 15 mm steeltubing and connections including cleaning for refixing completeall as specified and as directed |
| 35 | Taking up or down 20 mm steeltubingandconnections includingcleaningfor refixing completeall as specified and as directed |
| 36 | M&L for 15mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cuttingholesn exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcompleteall as specified and as directed |
| 37 | M&L for 20mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cuttingholesn exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcompleteall as specified and as directed |
| 38 | S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed. |
| 39 | S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed |
| 40 | Material and Labour forJoint free non-skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm butnexc 0.11 Sqm (300x300x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over& including 15 mm thick screed bed cement mortar(1:6) complete all as spcified. |
| 41 | Material and Labour forJoint free non-skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm butnexc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over& including 15 mm thick screed bed cement mortar(1:6) completeall as specified and as directed |
| 42 | Material and Labour forJoint free non-skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm butnexc 0.18 Sq (400x400x7 to 8 mm thick) as in skirtingetc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laidover 10mm thick rendering in CM (1:4) completeall as specified and as directed |
| 43 | Material and Labour forcoloured Glazed ceramic tiles as in vertical surfaceof Size 350x 250 x7mm /450x350x7 mmset and jointed in neat cement slurry laid over 10 mm thickcement renderingincement mortar 1:6 and pointed in white or colour cement to match the tile completeall as specified and as directed |
| 44 | M & L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointedwith grey cement slurry mixed with pigment to match the shade of theslab including rubbing andmirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed |
| 45 | M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size100 x 100 mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed)binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thicknessand thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @ 2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and safety arrangement for guniting work, complete all as specified and directed.(Note :-The finish of the surfaces to be matched with the existing surface.WPC shall be measured & paid separately as supply only). |
| 46 | M & L for cement concrete (1:3:6) type C2 (Using 20mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25and sand inthe proportion of (1:3 ) by weight completeall as specified and as directed |
| 47 | S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed |
| 48 | S&F 35 mm thick secondclasshardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat made out of 2nd class hard wood, 35mm thick and styles 75mm wide completeall as specified and as directed |
| 49 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing complete all as specified and directed |
| 50 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing.completeall as specified and as directed |
| 51 | S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) completeall as specified and as directed |
| 52 | S&FStainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed. |
| 53 | S&F butt hinges cold rolled mild steel 100mm long medium weight complete all as specified and directed. |
| 54 | S&F extruded anodised aluminumalloy handle 125mm long fabricated type .complete all as specified and directed. |
| 55 | S&F anodised aluminum barrel tower bolt of extruded section 150mm long. complete all as specified and directed. |
| 56 | S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheets, cast of exctruded sections and fixing bolts of extruded section and all as specified complete all as specified and directed. |
| 57 | S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 58 | S&F75mm butt hingescold rolled mild steel medium weight and fixed complete all as specified and directed. |
| 59 | S&FAluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed. |
| 60 | M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009)complete all as specified and directed. |
| 61 | M&L for preparation of newwooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 62 | M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:6 included finishing surface even and smooth without using extra cement onwalls etc complete all as specified and directed. |
| 63 | M&L for 10mm thick cement plaster on concrete surface in cement mortar (1:3) included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed |
| 64 | M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:4 included finishing surface even and smooth without using extra cement onwalls etc complete all as specified and directed |
| 65 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed. |
| 66 | Ditto all as per item No 65above here-in-before but in ceiling etc complete all as specified and as directed. |
| 67 | M&L for preparation of newly plastered surfaces of wall and applying twocoats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed. |
| 68 | Demolition of brick / block masonry/ Stone masonry built in Cement mortar complete all as specified and directed. |
| 69 | M&L for precast cement concrete (1:3:6) type C-1 ( using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wallcompleteall as specified and as directed |
| 70 | M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed. |
| 71 | M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4) complete all as specified and directed. |
| 72 | M & L for75 mm thick cement concrete (1:4:8) type D-2 (Using 40 mm graded crushed stone aggregate) as in floor etccomplete all as specified and directed |
| 73 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; match complete all as specified and directed |
| 74 | M&L forglossy finishChequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) complete all as specified and directed. |
| 75 | M&L for 100 mm thick cement concrete (1:2:4),type B-1 (Using 20 mm graded crushed stone aggregate) as in hard standing completeall as specified and directed. |
| 76 | M&Lforforming expansion joints 100 mmdeep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A completeall as specified and as directed. |
| 77 | M&Lfor preparation of old painted surfaces of wall by completely removing existingtreatment by scrapping , cleaning , washingwith water etc , andapplying two coats of oil bound distemper over one coat of alkali registant priming paint including filing the surface with crack filler wherever required complete all as specified and directed. |
| 78 | All as per item No 77 above but for ceiling surface complete all as specified and as directed. |
| 79 | M&L for Non-Shrink-Polymeric waterproof grouting compound mixed with neat cement slurry(mixing of ratio as per manufacturers instruction) be injected through the nozzles under pressure not exc 2Kg/Sqm to ensure that the grouts runs through all pores and cracks in the concrete there by sealing them after injections is over the nozzles be sealed off the CICO Supaplast and applying two coats of a polymer modified cementitious slurry upto 300mm from vertical and horizontal edges of crack (such as Tape-Crete or equivalent) be applied over the surface of walls/floors.Cracks to be cleaned and removing loose old concrete surfaces filled with filler material before epoxy grouting etc allas per manufacturers instruction and specification complete all as specified and directed. Note :-(i)Work to be excutedin patches at deteriorated portion, The rate quoted inclusive of work in patch manner).(ii)The cost of Scaffolding and necessary precautions equipment for over head tank height upto 30.00 mtrrequired are deemed to be included in the rates quoted by the contractor.(iii) Work to be excuted for water retaining structure (Water Filtration bed,Underground sump for ground floor and over tank height upto 30.00 mtr etc. |
| 80 | M&L for Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 81 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion by demolation of cement concrete or any type of work complete all as specified. |
| 82 | S & F for angle ironas in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, in rapair complete all as specified and directed |
| 83 | M&L for cement concrete (1:4:8), type D-2 (Using 40mm graded stone aggregate) as in foundations, filling and mass concrete completeall as specified and as directed. |
| 84 | Dismantling security fencing wire any type (babed wire, chain link fencing, GI mesh etc) complete all as specified and directed |
| 85 | Supply onlyChain link MS galvanised fencing conforming to IS 2721: 2003 including line wires of 3.15mm dia straining bolts, etc including provision of binding wire complete all as specified and directed |
| 86 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directedNote: Supply of chain link fencing shall be measured and paid separately under respective item. |
| 87 | S&F Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding5cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 88 | S&F mild steel straps including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified and directed |
| 89 | M&L formild steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less tan 0.9 mm dia or securing with clips quality conforming to round barsconfirming Fe-410-W(Gde.E-250), complete all as specified and as directed |
| 90 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed. |
| 91 | Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds, glazed with puttyor fixed with beads complete all as specified and directed. |
| 92 | S&FSheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 93 | M&L for preparing old plastered/conrete surface ofroof/wall with wire brush with water thoroughly to remove all dust/dirt and loose particles and applying 3 coats of Dr fixit New coat/Asian paint damp proof on roof/wall surfaces including crack seal sealent if required at crack portion of roof/wall all application as per manufacturer instruction and including warranty certificate provided by applicator/company complete all as specified and directed. |
| 94 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation complete all as specified and directed |
| 95 | Disconnecting existing water tanks exc 250lts n.exc 500 ltrs capacity ,setting aside (or lowering if required ) for repair,cleaning etc and hoisting if required reconnecting and refixing in position (cleaning,repairing etc measured separately) completeall as specified and as directed |
| 96 | Disconnecting existing water tanks exc 500lts n.exc 1000 ltrs capacity ,setting aside (or lowering if required ) for repair,cleaning etc and hoisting if required reconnecting and refixing in position (cleaning,repairing etc measured separately) completeall as specified and as directed |
| 97 | Cleaning and removing all scale and dirt, etc, from water storage tanks 500 Ltr capacity existing tanks and from mouths of circulating pipes, etc complete all as specified and directed |
| 98 | Cleaning and removing all scale and dirt, etc, from water storage tanks 1000Ltr capacity existing tanks and from mouths of circulating pipes, etc complete all as specified and directed |
| 99 | M&L preperation of old/new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over a coat of red oxide primer. |
