Balance Civil And Mechanical Works At Sdh Sopore-0 1 Main building :Providing and laying of stone soling/Boulders (Hand Packed) incld ramming , dressing and watering all complete incld carriage complete. 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)incld all carriages. 3 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 inCement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five levelincld all carriages complete. 4 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 coarse sand) incld carriages complete. 5 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick incld carriage. 6 Wall painting with acrylic emulsion paint of approved brand and manufacture to given an even shade two or more coats on new work incld carriage complete. 7 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate incld all carriage complete. 8 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) KD Wood incld all carriages complete. 9 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail woodincld all carriages complete. 10 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge.Second class Kail wood incld carriage. 11 Providing and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows, all complete with4.0mm thick glass panes incld carriage. 12 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of 12 mm thick pre-laminatedparticle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II markedincld carriage complete. 13 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) incld all carriage complete. 14 Providing and fixing of Almunium Hardware items.Aldrop with lock. 15 Tower Bolt 150 mm x10 mm 16 Tower Bolt 100 mm x10 mm 17 Handles 125 mm 18 Handles 100 mm 19 Hooks. 20 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded incld carriage. 21 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.Complete incld carriage. 22 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete.On steel work. 23 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incld carriage. 24 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incld carriage. 25 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge.18 mm thick incld carriage. 26 Repair to lekage in existing water supply pipe line of specified diameter incld identification of lekage point,cutting and removal of damaged pipe section,supply and fixing of new pipe segmentwith necessary pipe fittings(sockets,elbows,unions,couplers etc) ,clamp and supporters,sealing of jionts with appropriate sealants (PTFE tape/solvent cement),testing of pipe lines for leak proof performance under operational pressure conplete in all respects incld labour , tools and consumables incld breaking and restoration of wall, floor or plaster incld carriage. 27 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding incld all carriage complete. 28 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 29 Applying priming coatWith ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) incld carriage. 30 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work incld carriage. 31 Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors whereverrequired:W.C. pan with ISI marked white solid plastic seat and lid incld carriage complete. 32 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerincld all carriages complete. 33 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 450x300x150 mm incld carriage. 34 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge incld carriage. 35 Providing and fixing toilet paper holderC.P. brass incld carriage. 36 Providing and fixing of 100 mm dia PVC pipe type B of approved Quality incld all acessories like collars,Door Junction,Socket Bends etc and all other fittings complete Job. 37 Providing and fixing of 75 mm dia PVC pipe type B of approved Quality incld all acessories like collars,Door Junction,Socket Bends etc and all other fittings complete Job. 38 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld carriage. 39 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 20 mm OD(SDR-7.4). 40 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe ,32 mm OD(SDR-7.4). 41 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe ,40 mm OD(SDR-7.4). 42 Providing and fixing of 75 mm dia floortrap of approved brand all fxitures complete Job. 43 Providing and fixing of 100 mm dia floortrap of approved brand all fxitures complete Job. 44 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453x357 mm incld carriage. 45 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and Jaquar. incld carriage. 46 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia incld carriage. 47 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incld carriage. 48 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms incld carriage. 49 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms incld carriage. 50 Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete .15 mm nominal bore incld carriage 51 Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete .20 mm nominal bore incld carriage 52 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) incld carriage. 53 Providing and fixing aluminium work for Doors,windows,ventilators and partitions with extruded built up standard tubular section /appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixed with dash fastners of required dia and size incld necessary filling up of gaps at junctions i.e at top ,bottom and sides with required EPDM rubber/neoprene gasket felt etc .Almunium sections shall be smooth, rust free,staight,mitred and jionted mechanically wherever required incld cleat angle , almunium snap beading for glazing /panelling ,CP Brass /stainless steel screws, all complete as per architectural drawings and the direction of Engineer -In- charge incld 5 mm thick glass panes for fixed portion /shutters of doors and windows and ventilators incld providing and fixing of hinges /pivots and all necessary fittings wherever required power qouted almunium (Mimimum thickness of powder coated of 50 mircons jindal or equivalent make.16 guage incld all carriages .Frame work size 100x50 mm incld all carriages. 54 Removing existing glass from aluminium frame /sheets and replaced it with approved opaque sheets incld cost of material labour complete job as per directions of EIC. 55 providing and fixing water Heater Gyser of 50 ltr capcity of Jaquar or Equivalent Barnad incld all other fittings complete Job with carriage. 56 Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete with carriage. 57 Dismantling of wooden boardings in lining of walls and partitions ,excluding supporting members but incld stacking within 50 meters lead.Thickness above 25 mm upto 40 mm. 58 Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) incld carriage. 59 Add for Geo-Tag Photographs. 60 Construction of Septic Tank and Sokage Pit:Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil . 61 Providing and laying of stone soling75 mm thick incld ramming , dressing and watering all complete incld carriage complete 62 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)incld all carriages. 63 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incld carriage. 64 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more incld carriage. 65 Centering and shuttering including strutting, propping etc. and removal of form work forFoundations, footings, bases for columnsincld carriages. 66 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 inCement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five levelincld all carriages complete. 67 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)incld carriage. 68 Dry random rubble masonry with hard stone in foundation and plinth With bond stone.Quarry incld carriage. 69 Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid. Chamber 60x60x75 cm incld all carriage complete. 70 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stoneaggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5incld carriage. 71 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 gradedstone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50 mm thick with 20mm nominal size stone aggregate with carriage. 72 Providing and fixing in position 560 mm internal polycrete septic tank cover heavy duty (200 kg weight) with polycrete base provided with M.S sheet as per IS 12592 incld all carriages. 73 Construction of Fire Fighting Tank:Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge.All kinds of soil. 74 Providing and laying of stone soling75 mm thick incld ramming , dressing and watering all complete incld carriage complete 75 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)incld carriage. 76 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth leve in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage. 77 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more incld carriage. 78 Centering and shuttering including strutting, propping etc. and removal of form for. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc incld carriage. 79 Centering and shuttering including strutting, propping etc. and removal of form for.Suspended floors, roofs, landings, balconies and access platforms. incld carriage. 80 Providing and fixing Manholecover with CI coivers (2x2 size) complete as requirement incld all carriages. 81 Carriage of material by Mt from nearest source to site of workcomplete .Stone agg 40 mm foe an average lead 5 km 82 stone agg 20 mm n.s for an averagr of 5 km 83 sand average lead of1 km 84 Construction of Pump House at SDH Sopore:Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. 85 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.All kinds of soil. 86 Providing and laying of stone soling75 mm thick incld ramming , dressing and watering all complete incld carriage complete 87 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)incld all carriages. 88 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incld carriage. 89 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and strutsupto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage. 90 Providing and laying cement concrete in kerbs, steps and the like at or near ground level ncluding curing, excluding the cost ofcentring, shuttering, and finishing.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) incld carriage. 91 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 92 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more incld carriage. 93 Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns incld carriage. 94 Centering and shuttering including strutting, propping etc. and removal of form work forSuspended floors, roofs, landings, balconies and access platforms. incld carriage. 95 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 inCement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five levelincld all carriages complete. 96 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. 97 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thickincld carriage. 98 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate,including allcarriages. 99 Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including hold fast lugs or with dash fastenersIst class Deodar including all carriages.. 100 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood incld carriage. 101 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge.Second class deodar wood incld carriage. 102 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panesincld carriage. 103 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of 12 mm thick pre-laminatedparticle board (decorative lamination on both sides) grade-I, medium density flat pressed three layerparticle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked incld carriage. 104 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade incld carriage. 105 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) incld carriage. 106 Providing and fixing of Almunium Hardware items.Aldrop with lock. 107 Tower Bolt 150 mm x10 mm 108 Tower Bolt 100 mm x10 mm 109 Handles 125 mm 110 Handles 100mm 111 Hooks. 112 Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including allcarriages. 113 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2incld carriage. 114 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2incld carriage. 115 Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)incld carriage. 116 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work incld carriage. 117 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mmincld carriage. 118 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge . Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent incld carriage. 119 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests incld carriage. 120 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerincld carriage. 121 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :Size 450x300x150 mm incld carriage. 122 Providing and fixing toilet paper holder C.P. brassincld fittings anf fixtures. 123 Providing and fixing of 100 mm dia PVC pipe type B of approved Quality incld all acessories like collars,Door Junction,Socket Bends etc and all other fittings complete Job. 124 Providing and fixing of 75 mm dia PVC pipe type B of approved Quality incld all acessories like collars,Door Junction,Socket Bends etc and all other fittings complete Job. 125 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld carriage. 126 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. PN-16 pipe , 20 mm OD(SDR-7.4)incld carriage. 127 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. PN-16 pipe , 32 mm OD(SDR-7.4) incld carriage. 128 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. PN-16 pipe , 40 mm OD(SDR-7.4) incld carriage. 129 Providing and fixing of 75 mm dia floortrap of approved brand all fxitures complete Job. 130 Providing and fixing of 100 mm dia PVC pipe type B of approved Quality incld all acessories like collars,Door Junction,Socket Bends etc and all other fittings complete Job. 131 providing and fixing water Heater Gyser of 50 ltr capcity of Jaquar or Equivalent Barnad incld all other fittings complete Job with carriage. 132 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incld carriage. 133 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 810 gms incld carriage. 134 Providing and fixing 15 mm nominal bore C.P. brass long nosebib cock of approved quality conforming to IS standards and weighing not less than 810 gms incld carriage. 135 Providing and fixing 15 mm nominal bore C.P. brassAngle valveof approved quality conforming to IS standards andincld carriage. 136 Carriage of material by Machanical Transport incld loading,unloading and stacking.Sand 5 km 137 Aggregarate. 15 km 138 Bricks 60 km. 139 cement 3 km. 140 Steel 3 km. 141 Add for Geo-Tag Photographs.
