|
| 1 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 2 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | S &F aluminium anodised fixed partition wall with 5.50mm thick tinted glass panes with all fittings / fixturesanodised aluminium section frame work of size 114X44.5X1.5mm fixed with aluminium and rubber beading and fixing arrangement for fixing the framework to wall/floor and frame to frame complete all as specified and directed |
| 4 | S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading all as specified and directed. |
| 5 | M&L for16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed. |
| 6 | M & L Preparation ofnew plaster surfaces of wall and applying two coats of oil bound distemper over two coat of wall care putty on walls complete all as specified and directed. |
| 7 | M&L framed work such as grills, gratings, etc with ends of brars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way , railings, framework of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 8 | M&L for collasible steel gate, top hung, consisting of channel picketss, pivoted flat bars, top and bottom runners, brasshandles etc, as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and directed. |
| 9 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified. |
| 10 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 11 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L preparation of newlyplastered wall surfaces and applying two coats of cement base paint complete all as specified and directed. |
| 13 | M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed. |
| 14 | M&Lcutting holes in brick walls ( exc half but n. exc one brick ) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed. |
| 15 | M&L cutting channels, grooves or reabtes exc 15cm but n. exc 30cm in girth with or without reinfocement and trimming surfaces complete all as specified and directed. |
| 16 | Surface dressing not exc 15 Cm in soft/ loose soil. |
| 17 | M&L for brick work with old sizefly ashbricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. |
| 18 | M&L 15mm thick rendering in (CM) 1:4 on fair surfaces of brick walls finished even and smooth without using extra cement. |
| 19 | M&L hard core of broken bricks gauge n exc 63mm, deposited spred and levelled in layers n exc 15 cm thick ,warered and rammed to a true surface. |
| 20 | M&L for 100mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified & directed. |
| 21 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 22 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, all as specified and directed. |
| 23 | Excavating in post holes in hard and dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m |
| 24 | M&L for cementconcrete type D2 1:3:6 (40mm graded aggregate) in foundation, filling and mass concrete. |
| 25 | S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) |
| 26 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
