|
| 1 | Dismantling Existing damaged plain cement concrete including cost of all labour charges etc., complete as per standard specification. |
| 2 | Dismantling Existing damaged Reinforced cement concrete including cost of all labour charges etc., complete as per standard specification. |
| 3 | Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10 |
| 4 | Cement concrete Using1:4:8 mix ( One cement , four sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications.as perTNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 5 | Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing 90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. as per TNDSS NO: 30&86(I)For Side Wall |
| 6 | Plain Cement Concrete 1:3:6 (one cement, three crushed Stone Sand (M- Sand) and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 7 | Centering for soffits of RCC slab for plain surface like lintels, beams etc., including strutting 3m height using mild steel sheet of size 90cm x 55cm and B4 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver Oak joists of size 10cm x 6.5cm (spaced atabout 90cm c/c) and supported by casurina props of 10cm – 13cm dia spaced of 75 c/c complyingincluding all charges etc., complete as per standard specification. TNDSS NO: 30&86 |
| 8 | Supplying, Fabricating and placing in positionTMTsteel barsfor all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc.Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials completeas perTNDSS NO: 86 |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 10 | Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete. |
| 11 | Supply and fixing of Heavy duty manhole cover (600mm x 600 mm ) |
| 12 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. |
