|
| 1 | Supply only LED Flood light made up of pressure die cast aluminium housing with high efficiencyas lighting source and lens embedded PC cover havingwith IP 66 protection and impact resistance of IK07 of capacity 250 Watt. (Make : Havells/ Crompton/ Orient). |
| 2 | Supply only LED Flood light made up of pressure die cast aluminium housing with high efficiencyas lighting source and lens embedded PC cover havingwith IP 66 protection and impact resistance of IK07 of capacity 100 Watt. (Make : Havells/ Crompton/ Orient). |
| 3 | Supply only LED Flood light made up of pressure die cast aluminium housing with high efficiencyas lighting source and lens embedded PC cover havingwith IP 66 protection and impact resistance of IK07 of capacity50 Watt. (Make : Havells/ Crompton/ Orient). |
| 4 | Supply onlyLEDcircular high bay light with 150lm/W efficiency and 10 KV SPD with aluminium die-cast housing with high lumen efficacywith IP-65 of capacity 200 Watt. (Make : Havells/ Crompton/Jaquar). |
| 5 | Supply onlyLED20 Watt batten fittings4 feet longwith PC housingcomplete.(Make : Havells/ Crompton/ Jaquar). |
| 6 | Supply onlyLEDPst Top of capacity 20-25 Watt IP-65 elegantly designed spun aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corroson resistance. MS base provided to support the housing.(Make : Havells/ Crompton/ Orient). |
| 7 | Supply onlyLEDbollard garden light 8-10 wattof capacity 20-25 Watt IP-65 elegantly designed spun aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corroson resistance. MS base provided to support the housing.(Make : Havells/ Crompton/ Orient). |
| 8 | Supply onlyLEDsurface mounted round down lightof capacity 15 Watt. MS base provided to support the housing.(Make : Havells/ Philips/Wipro). |
| 9 | Supply and delivery of Ceilling fan 48” Sweep (a)Crompton Greaves make |
| 10 | Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required. |
| 11 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. |
| 12 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 13 | Supplying & Erection of medium size feeder pillar box of Size (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate alongwith suitable M.S. Angle. The P.B. have double hinge door at thefront & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing ofTimer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete(6:3:1). Rest portion coverd by 5\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C |
| 14 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection : 80 Amp (Legrand) |
| 15 | 10. Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection : 250 Amp (Legrand) |
| 16 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection : 63 Amp 4 pole. (Legrand) |
| 17 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection : 32 Amp 4 pole. (Legrand) |
| 18 | Supply only XLPE insulated armoured aluminium cable of size25 Sqmm4 core. (Make : Havells/Gloster/KEI). |
| 19 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 20 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) :4 bars, 415 V, 415 A, 4 x 65x13mm (al. Bus bar), 500x150mm (Dimension of box). |
| 21 | 16A Modular type Switch. |
| 22 | 16A Modular type 6 pin Plug Socket |
| 23 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe |
| 24 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:-(a)4 core 25 sqmm cable |
| 25 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below : upto 35 Sqmm. |
