|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof overingscomplete all as specified |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 3 | M&L for Pre-painted galvalume aluminium zinc coating GI based crimbed corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, andeves board fixed with self tapping screws as specified |
| 4 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per directed. |
| 5 | S&Fstructural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified. |
| 6 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 7 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directe incuding necessary formwork requiredcomplete all as specified and as directed by EIC. |
| 8 | M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and as directed. |
| 9 | Material and labour for Armstrong false ceiling with GI based powder coated steelsnap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 2-3mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Gypsum board decorative type size 600 x 600 x 8/9 mm thick fixed to steelframe work including Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, including frame of any description and any thickness, fixed in any position . complete all as specified and directed. |
| 10 | Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level. |
| 11 | Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed. |
| 12 | M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete complete all as specified and directed. |
| 13 | M&L for form work to sides and soffit of flooror floor beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs etc also splays between floors and bemss etc rough finish flat surfaces on concrete completeall as specified and directed. |
| 14 | M&L M-25 RCCusing 20mm graded stone aggregate in foundation including footing, plinth beam, base for column, etc complete all as specified anddirected. |
| 15 | M&L M-25 RCC using 20mm graded stone aggregate in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified anddirected. |
| 16 | S&F Mild Steel TMT round bars 10 mm dia and over,cut to length,bent to shape required,including cranking , binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 17 | All as per item No.16 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders. |
| 18 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 19 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete. |
| 20 | M&L for 75mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection ,finished fair and even, without using extra cement.complete |
| 21 | M&L 100 mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed. |
| 22 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes. |
| 23 | M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 24 | M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed . |
| 25 | M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over& including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 26 | All as item No (25) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified. |
| 27 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastesincluding waste pipefixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mmcomplete all as directed. |
| 28 | S & F machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed. |
| 29 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 20mm screed bed CM 1:6. incl demolitioncomplete all as specified and as directed. |
| 30 | Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed. |
| 31 | M and L for brickwork with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6)complete all as specified and as directed. |
| 32 | M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed. |
| 33 | Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame)complete. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed by EIC. |
| 35 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 36 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 37 | M&L for second class hard woodPlain, solid teek wood, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixedcomplete all as specifiedand directed |
| 38 | S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 39 | Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces.The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 40 | Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed. |
| 41 | Supply & Fixing 30 mm thick factory made glazed skeleton window shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated sash baras in window/ventilator, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed. |
| 42 | M&L for Preparation of wood or wood based new or untreated Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthatic enamel paint over a coat of pink primer. |
| 43 | Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC. |
| 44 | Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC. |
| 45 | Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC. |
| 46 | Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC. |
| 47 | S& F in repairsAluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified. |
| 48 | S& F3.50 mm thick sheet figured glass, pin headed typeand glazing with oil putty in squaresnot exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 49 | Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescompleteall as specified. |
| 50 | S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etcincl taking down GI Pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repairs Harrison rails, anodised aluminium alloy dropry rod including brackets fancy type 02 Nos each rod with fixing brackets, stops, rollers etc |
| 53 | S&Fin repairs rotational moulded polythylene water storage tanks 1000 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge |
| 54 | S&F for Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 55 | S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed. |
| 56 | S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed. |
| 57 | S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. |
| 58 | S&F in repair 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors. |
| 59 | S&F PVC (SWR) bends 110mm dia any radius. |
| 60 | S&F PVC (SWR) junction single (Single T) equal or unequal with access door110mm dia. |
| 61 | S&F PVC (SWR) Reducers 110mm to 75mm |
| 62 | S&F PVC(SWR) Vent cowl 75mm dia. |
| 63 | S&F in repair 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors. |
| 64 | All as per item No 63 here in before but fixed to walls. |
| 65 | S&F PVC (SWR) 75mm diaFloor Trap, plain with CP grating including jointing with solvent cement. |
| 66 | S&F in repairs Brass chromium plated bottle traps 40mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 67 | S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge |
| 68 | S&F in repairs vitreous China wash hand basin oval type under counter of Size: 605x430x200 mm whiteincluding15 mm dia bore fancy type pillar tap ,waste coupling 40mm, including cutting for and pinning in ends of brackets or fixed with bottle traps complete all as specified and as directed. |
| 69 | S&F in repair stop/angle valves15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed. |
| 70 | S & F in repairs mirror of with Border lights Twin - LED Mirror - Warm Light - Round/Square of selected quality glass, frameless and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 71 | S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 72 | S&F repairs PVC connection15mm size with CP brass Nutsof length 450mm complete all as specified and as directed by Engineer-in-Charge |
| 73 | S&F in repairs forTowel Rails of 20mm dia tubular brass chromium plated 60cm long \"D\" type fixed to all as directed by Engr-in-charge including taking down existing towel rail. |
| 74 | S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge |
| 75 | Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints. |
| 76 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement. |
| 77 | M&L for preparingsurface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coats of Oil bond Distermper complete all as specified. |
| 78 | M&L for preparingsurface of wall priming plastered and other surfaces with white cement priming paint over two coat ofcement base paint complete all as specified. |
| 79 | M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over aonecoat of wall care putty complete all as specified |
| 80 | M & L Complete removal of existing treatment on old surfaces on walls two cement base paint over a coat ofwhite cement primerincluding preparation of old surfacescomplete all as specified and directed. |
| 81 | Cleaning of sewage line and connected Manholes 150 mm bore dia of pipes from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge. |
| 82 | Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation and getting out in soft/loose soil all as specified and directed. |
| 83 | Returning ,filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loosesoil completete all as specified . |
| 84 | Removing surplus excavated material to a distance n.exc 50 metre and n exc 100 metre and depositing where directed at a level n.exc 1.5 m above the stafrting point. |
| 85 | PCC (1:2:4) type B-1, using 20 mm graded stone aggregate in coping etc |
| 86 | M&L providing precast cement concrete Type B0 1:2:4 (using 12.5mm graded aggregate) as inlouvres and jallies 50mm thick including all mouldings set in cement mortar 1:6 complete all as specified and directed. |
| 87 | M&L 15 mm thick rendering fair faces of brick masonary in cement mortar 1:4 mixed with water proofing compound finished with even and smooth mixed with Liquid Water Proofing admixture complete all as specified and directed.(Note : WPA shall be measured and paid separately under relevant item of this Schedule). |
| 88 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors. |
| 89 | M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed. |
| 90 | M&L for 100 mm thick Cement concrete B-1, 1:2:4, (20mm graded aggregate) as in bedding layer of floor finished the surface even and smooth with using extra cement. |
| 91 | Glass dividing strips, 3 mm thick X Width of strip 38mm inserted in position, conform to design |
| 92 | M&L for Broken glass coping on top of walls in cement mortar 1:3 |
| 93 | Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification all as specified and directed by Engineer-in-Charge. |
| 94 | Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed |
| 95 | Material and labour for point wiring complete with 1.5 sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of code red, blue and yellow for phase, black for neutral and green for earth of ISI marked drawn through and including PVC concealed of suitable size with accessoriesISI marked onwall/ceilingincluding PVC insulated copper cable FRLSH 1100 V grade multi stranded for earthcontinuity conductor of same type andsize andconnected to earth dolly includingprovision ofMODULAR boxes of suitable size MODULAR boxes,cover plate for mounting switches/sockets and regulators for One light point controlled by one switch one way complete all as specified and as directed. Note :- Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate. |
| 96 | All as per item No 95...but for One Ceiling fan/ Exhaust fan point controlled by one switch one way |
| 97 | All as per item No 95... but for one bell/buzzer pointcontrolled by one push button on the same board with other swiches or independent with 1.5 sqmm size. |
| 98 | All as per item No 95..But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3/6 pin 6/16 Amp socket outlet controlled by one switch on independend board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 99 | S&F modular Switch socket combination outlet 3 pin 6 amp flush type s, 240 V complete all as specified and directed |
| 100 | Switch socket Combination 16A, 6 pin, 3 modul 240 V complete all as specified and directed |
| 101 | S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 102 | S&Fcall bell electrical operated complete all as specified and as directed |
| 103 | S&Ffan regulator modular type 120w 2 module completeas specified and directed. |
| 104 | S&F bell switch modular type complete all as specified and directed. |
| 105 | S&F ceiling rose surface typewith 3 terminals complete . |
| 106 | S&F MCB Protected Switch socket combination with box 4 poleMCB Protected Socket 4 Module, Short circuit breaking capacity, 3kA(MCBs) used for AC, Washing Machine, Oven, Geyser, etc., Mounting type: Either Concealed or Surface,Base material: Metal white color, cover plate white color with 16A 3 pin top, 20A SP MCB, 16A Socket and dummy complete all as specified and directed. |
| 107 | M&L sub main wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in PVC concealed conduitof 2 run of 4sqmm PVC FRLSH copper cableand1runof 4sqmm PVC FRLSH copper cable for earth wirecomplete all as specified and directed. Note for sub main wiring :- (i)2 runs of wire and1 run of earth wire will be measured as one unit i.e RM(ii)Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire |
| 108 | S&F in replacement to LED street light fitting 35 Watt 230 volt AC outdoor type with high pressure die cast housing and heat resistance with complete with driver ,lamp with bracket with impact and corrision resistance including thermal management in multiple optics complete with IP -65/66 protection complete all as specified and directed. |
| 109 | S&F in replacement LED tube light lamp,220 V AC LED Tube Light Color Cool White Wattage 22/25 W Ultra Lumen 100-130 Lm/W Color Temperature 6500k Housing Material Extruded Aluminium with connecting up with 3 Core flexible copper conductor cable of suitable sizefrom ceiling rosecomplete all as specified and directed. Make:- Jaquar Cat Part No LKBU4KVS35XC, Wipro Cat part No.-D532265 ,Phillips Cat part No.-919415920100 or Equivelent. |
| 110 | Supply & fix with replace ofLED recessed mounted 2\"X2\" 36 Watt light along with fixture including taking down U/S old complete all as specified and direceted by EIC. |
| 111 | S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and directed. |
| 112 | S&F in replacement ofMCB SPN 32 Amps 240V ,50 Hz ,breaking capacity 10 KA,\" C \" series complete all as specified and directed. |
| 113 | S&F in replacement ofMCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA,\" C \" series completeall as specified and directed. |
| 114 | S&F in repairs of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete including blanking plates as required and making good the disturbed surfaces all as specified and as directed. |
| 115 | S&F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA,\" C \" series all as directed. |
| 116 | Supply and fix in replacement of 12 watt inverter LED Bulb retrofit type, 10 hrs Charging Time, 4 hrs Back-up Time Battery Capacity: 2200 mAh, rechargeable complete all as specified and directed. |
| 117 | Material and labour earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nut check nuts and washers of galvanised iron or steel, earth lead protection pipe 15mm bore GI medium grade, watering pipe 20mm bore GI medium grade all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and directed by Engr-in-Charge.Note : (i) The unit rate shall also includes for excavation earth work, type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe from earth test point upto equipment to be earthed, RCc 1:2:4 type B1 cover for earth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways and 6mm dia MS round bars at handles of cover slab all as specified in addition to sl No 1 (a) to (e) and 3 of under sub heading earthing as specified on ser page No 441 of SSR Part-II-2010. (ii)The rate shall be deemed to include for taking out existing earthing complete. |
| 118 | Supply and fix exhaust fan made of sturdy Engineering plastic AC single phase 230 Volts of size 250mm sweep with blades and frame and louvers complete all as specified and directed including necessary arrangement in wall for fixing the exhaust fan in kitchen including making hole,connection with 1.5 sqmm FRLSH cable from near ceiling rose. |
| 119 | Supply and fixing ceiling fans complete with blades, down rods, clamp,and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)hanging complete all as specified and as directed.Havells Cat Part no. FHCEO5SWHT48 or equivenentNote:- Price includes taking out of OLD UNSV fan from site and deposite in E/M store as directed by Engr In charge. |
