Tender For Erection And Dismantling Of Networks(Oh Line And Cable) Including Maintenance Works Of Lines And Sub Stations In Kk Nagar Sub Division Of Kk Nagar Division.; 1 Erection of DP Structure 2 Excavation of Pole pit of size 2x2x1/6 of the height of the pole for 9 mtr/Square pole by using JCB or Manual 3 Erection of RCC poles/PSC poles/Metal poles 9.0 M by using JCB or maual 4 Fixing of top channel 10 centre 5 Fixing of top channel 15 centre 6 Fixing of bed channel 7 Fixing of belting angle 8 Erection of 11 KV AB Switch 9 Erection of 11 KV HG Fuse set 10 Feeder arrangements with open type fuse units 11 Fixing of HT LAS 12 Fixing of LT LAS 13 HT Jumpering complete for Transformer DT Structure 14 HT Jumpering complete for DP Structure 15 Fixing of cross bracing (4 nos angles) 10 Centre 16 Fixing of cross bracing (4 nos angles) 15 Centre 17 Fixing of centre support for bed channel 18 Fixing of danger board 19 Fixing of Distribution Transformer Name Board (Name of the 22 / 11 KV #, Name of the SS and Capacity) including Supply of board (1 x 1.5 x 3 mm thickness) including the cost of paint and labour charges 20 Fixing of Earth coller for earth pits 21 Erection of aluminium bus bar pipe complete for HT bus bar arrangements for DP structure 22 Erection of aluminium bus bar pipe complete for HT bus bar arrangements for 3P & 4P structure 23 Structure Concreting, Concreting of poles with size (2x2x5) including cost of Cement, jelly and Sand with a mixture of 1:3:6 and plastering of concrete with ratio 1:2 24 Stay concreting of Stay with Size 1.5X 1.5X 3.0 including cost of 40 mm Cement, Jelly and sand (with supply) with mixture 1:3:6 along sleeve concreting and plastering of concrete portion above the ground level with ratio 1:2 25 Earthing of D.P.Structure complete 26 Earthing of new double pole distribution transformer structure complete 27 Painting of two coats of Aluminium paints for Transformers structure and iron materials and painting of structure pole with distemper 28 including cost of paintincluding cost of materials etc. by contractor 29 Paintsupplied by board 30 Name plate painting and lettering of transformer details including cost of materials and labour 31 Labour Charges and fixing of meter on LV Side of DT 32 DT Metering Works, Test Terminal Box, fuses for PT, Cables (For CT, PT and Neutral Connections), metallic hose for hosing cable from DT to Meter Box, Hylem Sheet terminal of adequate thickness to hold CT coils Ferrules, Lugs, Screws, etc 33 Erection of Transformer upto 200 KVA including connections 34 Erection of New Transformer above 200 KVA including connections 35 Re-earthing of DT Structure 36 Erection of 33 KV AB Switches 37 Erection of 11 KV Solid core HG Fuse set 38 ERECTION OF HT & LT LINE 39 Excavation of Pole pit of size 2x2x1/6 of the height of the pole upto 8 mtr pole by using JCB or Manual 40 Excavation of RSJ/Rail/tubular pole pit above 9.0 M by using JCB or manual 41 Excavation of pit in Hard rock place which requires blasting 42 Excavation of pit in Hard rock place which does not requires blasting (Where Houses are located) 43 Excavation of Stay pit 2x2x5 depth by using JCB or manual 44 Erection of RCC poles/PSC poles/Metal poles up to 8.00 M (27) by using JCB or manual 45 Erection of RSJ, Rail and fabricated poles above 9.0 M by using JCB or maual 46 Erection of stay set complete 47 Fixing of HT V cross arms (all types) / channel cross arms / guarding Cross arms 48 Erection of Tapping channel 5 size 49 Fixing of LT 3 phase cross arms 50 Fixing of LT Single phase cross arms 51 Fixing of HT / LT TI Fittings 52 Fixing of HT pin Insulators 11 KV / 22 KV / 33 KV 53 Fixing of HT 11 KV strain disc. 54 Fixing of HT 33 KV strain disc 55 Fixing of LT pin Insulator 56 Fixing of LT shackle 57 Fixing of Aluminium Knob 58 Fixing of Double Channel Cross Arm 59 Earthing of pole with pin including looping binding and burying 60 Sleeve concreting with size (2x2x3) including cost of excavation Cement, jelly and Sand with a mixture of 1:3:6 and plastering of concrete with ratio 1:2 including materials 61 Paving of Conductor, Stringing, binding, jumpering etc., complete with ACSR for lines with DOG conductor 62 Paving of Conductor, Stringing, binding, jumpering etc., complete with ACSR for lines with 7/4.09 mm 63 Paving of Conductor, Stringing, binding, jumpering etc., complete with ACSR for lines with 7/3.35 mm ACSR or 7/3.15 mm AAAC 64 Paving of Conductor, Stringing, binding, jumpering etc., complete with ACSR for lines with 7/2.59 mm or 7/ 2.50 mm 65 Numbering of pole by using Enamel paint including cost of paint and painting charges (150 diameter with 2.5 height letters or100x150 mm with 2.5 letters) 66 PAINTING INCLUDING COST OF PAINT 67 Painting of Cement Poles by using Distemper paint (Single Coat) 68 Painting of Metal Poles by using Aluminium paint (Single Coat) 69 Painting of top channel 70 Painting of AB switch 71 Painting cross Bracing (4 Nos. Angles) both 10 & 15 centre 72 Painting of Transformer (only one coat) upto 100 KVA 73 Painting of Transformer (only one coat) above 100 KVA 74 Painting of HG fuse. 75 Painting of HT metering set and Box 76 GUARDING ARRAGEMENTS 77 LT split neutral guarding 78 Flat guarding including fixing of 2 Nos. cross arms HT LT 79 Guarding for D.O.T. Crossing 80 LOADING, UNLOADING & TRANSPORTING 81 Loading, Unloading and Transporting of Materials Below 8 Kms 82 Loading, Unloading and Transporting of Materials Above 8 Kms. For additional Km 83 Loading of poles up to 27 RCC / PSC / Metal poles 84 Loading of poles 30 RCC / PSC poles and RSJ Pole of all sizes 85 Unloading of poles upto 27 86 Unloading of poles upto 30 87 Loading of cement bag of 50 Kg. 88 Unloading of cement bag of 50 Kg. 89 Loading of Transformer oil drum with oil 200 Lit. capacity 90 Unloading of Transformer oil drum with oil 200 Lit. capacity 91 Loading of materials 92 Un-Loading of Materials 93 Stacking of Materials 94 Transporting of poles from road side to pole pit Location including loading and unloading of poles by using JCB or Manual Up to 200m 95 Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or Manual above 200 m 96 Loading or unloading of Transformer upto 200 KVA at site and store 97 Loading or unloading of Transformer above 200 KVA at site and store 98 Transporting of DT Upto 100 KVA using TATA ACE or Equivalent Vehicle up to 10KM 99 Transporting of DT Upto 100 KVA using TATA ACE or Equivalent Vehicle above 10KM 100 Transporting of DT Above 100 KVA using Eicher 407E or Equivalent Vehicle up to 10KM 101 Transporting of DT Above 100 KVA using Eicher 407E or Equivalent Vehicle above 10KM 102 Metering set loading and unloading 103 Loading of Conductor drum of all sizes with conductor 104 Loading of Conductor drum of all sizes without conductor 105 Unloading of Conductor drum of all sizes with conductor 106 Unloading of Conductor drum of all sizes without conductor 107 Loading & unloading oil drums (with Oil) 108 Loading & unloading of drums (without oil) 109 Loading / Unloading of Single Phase Meter 110 Loading / Unloading of Three Phase Meter 111 OTHER MISCELLENEOUS WORKS 112 Re-sagging of HT line with ACSR 7/4.72 mm Conductor 113 Re-sagging of HT / LT line with ACSR 7/4.09 mm Conductor 114 Re-sagging of HT / LT line with ACSR 7/3.35 mm or AAAC 7/3.15 mm conductor 115 Re-sagging of HT / LT with ACSR 7/2.59mm or AAAC 7/2.50 mm conductor 116 Erection of street light including fixure fitting 117 Erection of street light service 118 Fixing of new SV/MV/LED lamp fittings 119 Hut service fixing 120 Breaking and Releasing of grills from RCCPSC poles 121 Releasing of single phase service wire and re-fixing. 122 Releasing of 3 phase service wire and (upto 50 HP) re-fixing 123 Releasing of 3 phase service wire and (above 50 HP) re-fixing 124 Fixing of Double Channel X arm/ Double V cross arm 125 Erection of new earth pipe by replacing the corroded earth pipe including burying, looping and binding 126 Erection of 3 nos new 10 Earth pipe replacing the corroded earth pipe and renewal of earthing including burying looping and binding 127 Cutting of coconut leaves / tree branches 128 Drilling of hole in channel only 3/4 & 1 perhole 129 Cutting of flat 130 Cutting of channel 131 Cutting of Angle 132 Cutting of pipe 133 RSJ pole cutting 134 RSJ pole welding 135 Providing of line spacers for single phase line 136 Providing of line spacers for three phase line 137 Hiring Charges for JCB 138 Clearing of Jungle 139 Clearing of scrub in yard (DT/SS) 140 Set right the leaning of pole in HT/LT in Pin point 141 Set right the leaning of pole in HT/LT in Cut point 142 Erection of LT Shunt Capacitor 143 Ground patrolling of HT lines during Breakdown 144 Rectification of snapped HT line during Breakdown 145 Rectification of snapped LT line during Breakdown 146 Erection of Single phase meters 147 Erection of Three phase meters 148 Crane hire charges 149 Provision of Paa Jumpers 150 Erection of Metering Set 151 DISTRIBUTION TRANSFORMER MAINTENANCE WORKS 152 Monthly Maintainenance of Distribution Transformer Yard and earth pits neat and tidy, Cleaning the entire transformer including the bushings, Checking for oil level and reporting if the level is below the mark, Checking the earth connections and watering theearth pits, Checking the oil leaks and reporting if any noticed, Reconditioning the breather (by reactivating Silicagel or replacing it if necessary) and Checking the LT fuses and renewing them if necessary 153 Annual Maintenance of DT - Lubricating the AB switches and checking their operation, Checking the lines and earth connections of AB switch, Checking the lines and earth connections of HT and LT lightning arresters and Checking the HV and LV bushing connections 154 SUB STATION MAINTENANCE WORKS 155 Complete maintenance of Power Transformer of all capacities in SS 156 Complete maintenance of Breaker, CT/PT for 110 KV and above in SS 157 Complete maintenance of Breaker, CT/PT for capacity less than 110 KV in SS 158 Complete maintenance of Centre Rotating Switch 110 KV and above in SS 159 Complete maintenance of Centre Rotating Switch below 110 KV in SS 160 Replacement of Clamps of all sizes in SS 161 Complete maintenance of LAS 110 KV and above in SS 162 Complete maintenance of LAS below 110 KV in SS 163 Replacement of Jumpers less than 1 metre in SS 164 Replacement of Jumpers more than 1 metre in SS 165 Maintenance of earth pits and watering in SS 166 Cleaning of control and relay panels (Front, Back and inside) in SS 167 Mainenance of Capacitor Bank cell in SS 168 Replacement of capacitor bank cell in SS 169 Replacement of PT Insulator in SS 170 Replacement of Female/Male contact for 110 KV in SS 171 Replacement of Female/Male contact for less than 110 KV in SS 172 Maintenance of Battery in SS 173 OTHER DISMANTLING WORKS 174 Dismantling of HT V cross arms (all types) / channel cross arms / guarding Cross arms 175 Dismantling of LT 3 phase cross arms 176 Dismantling of LT Single phase cross arms 177 Dismantling of HT / LT TI Fittings 178 Dismantling of HT pin Insulators 11 KV/22 KV/33 KV 179 Dismantling of HT 11 KV strain disc / Polymer Disc 180 Dismantling of HT 22 KV / 33 KV strain disc / Polymer Disc 181 Dismantling of LT pin Insulator / Polymer Insulator 182 Dismantling of LT shackle 183 Dismantling of Aluminium Knob 184 Dismantling of Pole earthing 185 Dismantling of top channel 10 centre 186 Dismantling of Line upto 7/3.35 mm including transporting to nearest road side and stocking of coil 187 Dismantling of Line above 7/3.35 mm including transporting to nearest road side and stocking of coil 188 Dismantling of top channel 15 centre 189 Dismantling of bed channel 190 Dismantling of centre support for bed channel 191 Dismantling of belting angle 192 Dismantling of 11 KV AB Switch 193 Dismantling of 11 KV Vertical type AB Switch for single pole DT 194 Dismantling of 11 KV HG Fuse set 195 Dismantling Feeder arrangements with open type fuse units 196 Dismantling of HT LAS 197 Dismantling of LT LAS 198 Dismantling HT Jumpering complete for Transformer DT Structure 199 Dismantling HT Jumpering complete for DP Structure 200 Dismantlingof cross bracing (4 nos angles) 10 Centre 201 Dismantling of cross bracing (4 nos angles) 15 Centre 202 Dismantlingof danger board 203 Dismantling of Transformer centre set arrangments 204 Dismantling of LT Cable arrangements while erecting single pole DT 205 Dismantling of Earth coller for earth pits 206 Dismantling of aluminium bus bar pipe complete for HT bus bar arrangements for DP structure 207 Dismantling of aluminium bus bar pipe complete for HT bus bar arrangements for 3P & 4P structure 208 Dismantling of detoriated cables / Replacement of various size (120, 240 Sq.mm) from Distribution Transformer LT bushing to LT open type clamp and provision of suitable lugs at both the ends 209 Releasing of ACSR / AAAC conductors from conductor drum and coiling ACSR 7 / 3.35, 7/2.59, AAAC 7/2.50, 7/3.15 MM (Per/Km) 210 Dismantling of Metering set 211 Dismantling of 33 KV AB Switch 212 Dismantling of Distn. Transformer from structure Transporting to special Maintenance up to 8 Kms 213 Dismantling of Distn. Transformer from structure Transporting to special Maintenance above 8 Kms per km 214 11KV CABLE LAYING WORKS 215 Excavation of cable trench 0.6 meters width and 1.2 meters depth - Normal road (earth ) 216 Excavation of cable trench 0.6 meters width and 1.2 meters depth -Tar Road 217 Excavation of cable trench 0.6 meters width and 1.2 meters depth - Concrete Road 218 Loading , unloading & Transporting of 11 KV HT cable from departmental stores to work spot- 3x300 sq mm XLPE (1 drum: 200 m) 219 Loading , unloading & Transportingof 11 KV HT cable from departmental stores to work spot- 3x120 sq mm XLPE (1 drum: 200 m) 220 Laying of HT 300 sq mm XLPE cable 221 Laying of HT 120 sq mm XLPE cable 222 Covering HT cable by cement V trough after covering the cable with good loose earth includingloading, unloading and transport from stores to site and letter painting of feeding details & Cable size on the trough 223 Refilling with excavated earth layers well consolidated as per std specification including all materials, lead, lift etc., complete. 224 Transport back any balance cable, empty drums and other materials if any by engaging private vehicle including recoiling, coiling and loading and unloading at both sides from workspot to departmental stores (minimum 2 empty drums) 225 LT CABLE LAYING WORKS 226 Transporting of LT Cable 240 sq.mm (1 drum - 200 meters) 227 Transporting of LT Cable 120 sq.mm (1 drum - 500 meters) 228 Transporting of LT Cable 25 sq.mm (1 drum - 500 meters) 229 Transporting of LT Cable 16 sq.mm (1 drum - 500 meters) 230 Excavation of cable trench 45 cm width and 75 cm depth - Normal Road (earth) 231 Excavation of cable trench 45 cm width and 75 cm depth - Tar Road 232 Excavation of cable trench 45 cm width and 75 cm depth - Concrete Road 233 Laying of LT 240 sq.mm cable 234 Laying of LT 120 sq.mm cable 235 Laying of LT 25 sq.mm cable 236 Laying of LT 16 sq.mm cable 237 Refilling of cable trench 238 ERECTION & MAINTENANCE OF PILLAR BOX (including excavation of foundation pits as per standard specification 2Nos. Pillar concerete walls, coping and earthing the pillars below ground level 1ft and above 2feet/3feet from ground level including cost of all materials, labours including electrical works, transportation lead, lift complete etc.,) 239 Laying of cable using Trenchless technique with scanner without pipes upto 50 mt LT/11 KV/33 KV single run 240 Laying of cable using Trenchless technique with scanner without pipes above 50 mt LT/11 KV/33 KV single run 241 ERECTION & MAINTENANCE OF PILLAR BOX (including excavation of foundation pits as per standard specification 2Nos. Pillar concerete walls, coping and earthing the pillars below ground level 1ft and above 2feet/3feet from ground level including cost of all materials, labours including electrical works, transportation lead, lift complete etc.,) 242 Erection of Mini pillar boxes for 3 feet 243 Erection of 4/6/8 way pillar box 3 feet 244 Cleaning, painting with Aluminium paint 2 coats 8 way pillar box ( including paint) 245 Cleaning, painting with Aluminium paint 2 coats 6 way pillar box ( including paint) 246 Cleaning, painting with Aluminium paint 2 coats 4 way pillar box ( including paint) 247 Cleaning, painti.ng with Aluminium paint 2 coats Mini way pillar box ( including paint) 248 Dismantling of old 4/6/8 way pillar box 249 Dismantling of old Mini pillar box 250 Maintenance of 8 way pillar box 251 Maintenance of 6 way pillar box 252 Maintenance of 4 way pillar box 253 Maintenance of Mini pillar box 254 Earthing of 8/6/4 and Mini pillar boxes 255 STRAIGHT JOINTS & TERMINATION WORKS 256 Provision of joint 240/120 Sq mm 257 Provision of joint 25/16 Sq mm 258 11 KV 120/300 sqmm Indoor/Outdoor termination works 259 33 KV 1x630 sqmm Indoor/Outdoor termination works 260 33 KV 3x400/3x630 sqmm Indoor/Outdoor termination works 261 Charges for 11KVJoints 262 Charges for 33 KV (1X630 Sqmm) Joints 263 Charges for 33 KV (3x400 Sqmm) Joints 264 CABLE FAULT RECTIFICATION WORKS 265 Transport of all materials to attending the fault from office to site and site to office vice versa 266 Refilling with M- sand over the 11 KV cable and joints towards supply of M Sand 267 Refilling with M- sand over the 33 KV cable and joints towards supply of M Sand 268 Refilling labour charges for 11 KV Joints 269 Refilling labour charges for 33 KV Joints 270 Transporting of cables and joint kits from stores to site for 11 KV cable fault works 271 Transporting of cables and joint kits from stores to site for 33 KV cable fault works 272 Transporting of cables and joint kits from office to site for 11 KV cable fault works 273 Transporting of cables and joint kits from office to site for 33 KV cable fault works 274 Engaging JCB For Excavation of Earth for 11 KV , 33KV cable fault rectifaction works 275 Engaging Hydraulic compressor for 11 KV , 33KV cable fault work 276 Rental for de-watering pump for 11 KV , 33KV feeder trench 277 Engaging Labour for 11 KV cable works 278 Engaging Labour for 33 KV cable works 279 Concreting after rectification of 11 / 33 KV fault by using PCC 1:3:6. Applicable subject to justification & Certification of Eeas per site conditions 280 SERVICE CONNECTION CABLERELEASING FROM OH LINES DUE TO OH TO UG CABLE CONVERSION 281 Releasing the service connection cable ( 2 x 16 Sqmm) from OH line, cutting the service cable of required length for terminating in the newly erected pillar boxes and handing over of released cable in section stores 282 Releasing the service connection cable (4 x 25 Sqmm) from OH line, cutting the service cable of required length for terminating in the newly erected pillar boxes and handing over of released cable in section stores 283 Releasing the service connection cable (4 x 240 Sqmm) from OH line, cutting the service cable of required length for terminating in the newly erected pillar boxes and handing over of released cable in section stores 284 SINGLE POLE DT ERECTION WORKS 285 Loading of 9 mtr Square RCC Pole 286 Unloading of 9 mtr Square RCC Pole 287 Labour and transporting of 9 mtr RCC Square pole upto 5 KMs 288 Excavation of Square Pole pit per size 3x 3x6 for single pole DT structure 289 Erection of 9 mtr Square RCC pole including base plate 290 Excavation ofstay pit per size 2x 2x6 for Single Pole DT structure 291 Erection ofstayset including baseplate for Single Pole DT structure 292 Earthing of SP Pole structure complete set with 3Nos earth pits excavation including providing 3nos earthpipe of size 40mmx3mtr (GI Pipe), pit size 2x2x2 filled with mixture of sand, charcoal and common salt in equal proportion to to depth of 1.25 and 1jelly to a depth of 9, earth connection to be provided with GI wire, plates and bolts and Nuts.(Except 3 Nos earth pipe with GI wire, plates and bolts and nuts all other materials to be supplied by Contractor) 293 Erection of Transformer structure materials including transporting from road side to work spot per set for Single Pole DT structure 294 Erection of Transformer centre set arrangments 295 Erection of 11 KV Solid core HG Fuse set 296 Erection of SP Pole DT 11 KV AB Switch set including transporting from roadside to work spot 297 Erection of SP Pole DT HG Fuse set including transporting from road side to work spot. Per set 298 Mass concreting of SP pole DT with 1;4:8 mix 1/2 broken metal jelly, cement and river sand including coping. (Size height of pole).(as per civil rate) all materials will be supplied by contractor.(Including DT Support pole) 299 Painting of SP Pole Transformer structure including cost of paint, brush etc., (1.one coat of red oxide paint in all iron materials, 2.colour washing of 2nos structure poles, 3.painting of transformers, and all iron items with aluminium paint) 300 Erection LT Open Type fuse unit for SP Structure 301 Fixing of LT Cable arrangements while erecting single pole DT 302 sub total 303 GST 18% for sub total 304 Total
