Tender For Provn Of Certain Minor And Revenue Works Under Ge Dehradun; 1.00 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. 2.00 Excavating over areas, n exc 1.5 m deep and getting outsoft/loose soil complete all as specified and directed 3.00 Excavating over areas, exceeding 1.5m and not exceeding 3.0 m deep and getting out hard/dense soil complete all as specified and directed 4.00 Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 5.00 Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed. 6.00 Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed. 7.00 Material and labour for PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base of floor etc complete all as specified and directed. 8.00 Material and labour for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed. 9.00 Material and labour for 60 mm thick pre polished rubber moulded coloured (red/yellow) vibromatic machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed 10.00 Material and labour for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. 11.00 Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 12.00 Material and labour for brick work with sub class B brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 13.00 Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed. 14.00 Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed. 15.00 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed. 16.00 Removing surplus excavated material (soil) to distance not exc. 50 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point complete all as specified and directed. 17.00 Supply and fixing of mild steel, rolled sections, framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. 18.00 Supply and fixing of rolled mild steel work in tubular trusses, pole etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed 19.00 Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), quality A complete all as specified and directed. 20.00 Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 21.00 Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 22.00 Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. 23.00 Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in foundations, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete complete all as specified and directed. 24.00 Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, post and strut etc complete all as specified and directed. 25.00 Material and labour for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed. 26.00 Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all as specified and directed. 27.00 Supply and fixing of steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed 28.00 Description all as ser item no 27 above but 5mm dia and over upto and inclluding 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. 29.00 Material and labour for 15-18 mm thick granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 15mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed. 30.00 Dismantling of wrought iron or mild steel work of any description not otherrwise provided for complete all as specified and directed. 31.00 Dismantling of boarding, any description, fixed with screws in any position complete all as specified and directed. 32.00 Supply and fixing 3mm thick ACP (Aluminium composite panel) fixed with screws on existing mild steel frame complete all as specified and directed. Note: Mild steel frame will be measured and paid separately. 33.00 Supply and fixing for stainless steel 304 grade pre fabricated letters of size 18 height fixed in position by screws complete all as specified and directed. 34.00 Supply and fixing Acrylic pre fabricated logo of size 18 height fixed in position by screws complete all as specified and directed. 35.00 Supply and fixing 2-3 mm thick acrylic sheet fixed with screws on existing mild steel frame complete all as specified and directed. 36.00 Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 37.00 Taking down existing steel gate and refixing the same including complete removal of exisiting paint and applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour including all fittings such as L-hook, clips, sliding bolts,etc. and necessary welding complete all as specified and directed 38.00 Excavation in post holes (or similar holes) each n.exc 0.5 cum and getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance n.exc 50m & making good surface in any type soil complete all as specified and directed. 39.00 Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed. 40.00 Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed. 41.00 Material and labour for PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in surface channel and drain etc complete all as specified and directed 42.00 Material and labour for ready mix reinforced cement concrete M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 43.00 Material and labour for ready mix reinforced cement concrete M-25 (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. 44.00 Material and labour for use and waste of formwork to faces of walls, retaining walls, abutments parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and directed . 45.00 Supply and fixing of 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings joints etc; as in weep holes complete all as specified and directed. 46.00 Material and labour for boulder filling dry, hand packed tightly, as in wire crate apron bunds complete all as specified and directed. 47.00 Material and labour for surface preparation of roof and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed. Note : WPC will be paid separately 48.00 Supply only water proofing compound complete all as specified and directed. 49.00 Material and labour for Water proofing roof treatment with APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm five layers with center core as 100 micron HMHPDE film sand witched between two layers of polymeric (Static polythene based) between laminated on both sides with 20 micron HMDPF film over a coat of hot blown bitumen with 85/25 grade @ 1.20 Kg/Sqm after priming the surface with bituminous emulsion @ 0.30 Litre/Sqm on plastered surface. Water proofing membrane should be laid with over laps 150 mm at ends and 75 mm for sides and shall be bounded uniformity by LPG torch flame over the polymeric water proofing membranes apply semi hot blown bitumen 85/25 grade @ 1.20 Kg/ sqm dusted sand over the coat of the coat @0.5 Kg/Sqm and applying aluminium reflective paint over it as per manufacturers instructions complete all as specified and directed.NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractors quoted rate for this item shall deemed to be inclusive of this aspect. 50.00 Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit 25mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.6 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTES :- (i) The wiring to be done as per IE rule and as per colour code.(ii) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (iii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iv) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. 51.00 Supply and fix Modular switch single pole, one way, 6 Amps, 1 module, complete all as specified and as directed. 52.00 Supply and fix ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. 53.00 Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and directed. 54.00 Supply and fix distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed. 55.00 Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp C series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. 56.00 Supply and fix MCB single pole and neutral 240 volt 10 KA 6 to 32 Amp C series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. 57.00 Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC concealed conduit with accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : (i) The wiring to be done as per IE rule and as per colour code. (iI) Two run of single core PVC cable with two run of earth conductor and conduit shall be measured as one unit.(iiI) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs) (a) 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed. 58.00 NOTE:- Amount of credit of Rs. 3000.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.