Certain Repair Work To Charpoy Gi Hard Top And Wooden Furniture Alongwith Polishing And Recanning Under Bso Of Ge (West) Pathankot; 1 Removing damaged/unserviceable parts of Chair dinningand supply & fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol.Any parsts loose of chair also to be tightened tight by using fevicol and providing 8 nos triangular wooden brackets. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge.(Drg no. FD-16, FD-228, FD-279) Front Leg of Chair dinning 2 Rear Leg of Chair dinning 3 Back rest of Chair dinning 4 Stiffner of Chair dinning 5 Rear and side rails and make holes for canning as shown in drg 6 Removing damaged/unserviceable parts of Chair writingand supply and fixing of new teak wood partsduly polished in two coats after prepration of surfaces with using bamboo pin and fevicol.Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets of triangular shape. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD -20, FD-202, FD-250, FD-280) Front leg 7 Rear Leg 8 Back Rest 9 Stiffner 10 Hand rest 11 Front/rear/side rail and make holes for cannin 12 Removing damaged/unserviceable parts of chairs easyand supply and fixing of new teak wood partsduly polished in two coats after prepration of surfaces with using bamboo pin and fevicol.Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets triangular shape.In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge.(Drg no. FD-17, FD-201, FD-229 etc) Front / Rear Leg 13 Hand rest 14 Front/rear/side rails and make holes for canning 15 Back frame except back rest 16 Back rest 17 Stiffener of size 50 x 25 mm under seat of the chair easy as shown in drawing 18 Chair dinning cushioned/ Chair dinning Offr(Drg no. FD/E6/MAP/10 etc) Removing of U/S Front leg and S & F new front leg made out of teak wood size all as per drg and directly Engr-in- Charge 19 Removing of U/S rear leg S & F new rear leg made out of teak wood size all as per drg and directly Engr-in- Charge 20 Removing of U/S Side rails /Front rails/ Rear rails of S & F of New Side rails/ Front rails rear rails made out of teak wood size all as per drawing and directed by Engr-in-Charge 21 Removing of U/S Back verticle stiffener size 30 x 15 mm and S & F new back verticle stiffener size 30 x15mm made out of teak woodall as per drawing and directed by Engr-in-Charge 22 Removing of U/S Stiffener size 20x15mmand S & F New Stiffener size 20 x15 mm made out of teak wood all as per drg. 23 Removing of U/S Cushing material/Tapestry coth and Ply wood seat of chair dinning cushioned and S&F New seat made from ply wood 12mm thick 5 ply and upholstringof chair with new tapestry cloth ofMin Price range of Rs 150/Per Mtr of approvedshade with foam sheet 75mm thick 40 Density all as per drawing. 24 Supply of Cushion for Dressing Stool of size 420x260x50mm thick of 40 density duly upholistered with tapestry cloth of price not less to 200 per Mtr shade quaility of father foam complete all as specified and directed. (Drg No. FD/E6/MAP/14 etc) 25 Removing damaged/unserviceable Cane plastic from wooden furniture and material and Labour for recanning with Cane 2mm wide cane (colour of white/ivory) as per godrej pattern all as specified shown on drawing and and border of 4mm thick cane of similar colour rest as directed. Make of cane , Shah Brand, primier, maharastra Cane) Rest all as per the direction of Engr-in-Charge.(Drg No. FD-16,17, 20, 56, 201, 202, 228, 229, 250, 279, 280, 27, 282) 26 BED HARD :-S&F of 12mm thick ply wood commerical 6ply(single piece) after removing old damaged / sagged ply. Ply wood shall be fixed with proper worksmen ship to be properly fixed in the longrails and short rails complete all as specified and as per the direction of Engr-in-Charge. (Drg no. FD 246) 27 S&F long rail of bed of size 75x50x1980mm made out of 1st class teak wood duly wrought and ends slightly rounded off, made to shape including taking out the old broken/cracked raill all as shown on drawing and all as directed. 28 S&F stiffeners of size 40x50x900mm made out of Ist class teak wood, duly wrought made to shape including taking out the broken/okd stiffeners all as specified and directed 29 S&F in position head rest including legs made out of well seasoned Ist class teak wood frame, supply and fixing 4mm thick plywood one side teak faced on the frame including taking out the old broken/decayed head rest all as specified and directed 30 S&F in position foot rest including legs made out of well seasoned Ist class teak wood frame, supply & fixing 4mm thick ply wood one side teak faced on side of the frame including taking out the old broken/decayed foot rest all as specified and as directed 31 M&L for French polishing of bed after cleaing the surfaces (old or new) with sand/empty paper refiling the borer holes/cracks with putty (wherever required) applying the raw sienna/burnt sienna as per requirement, make the surface smooth again with sand/empty paper to the entire satisfaction of Engr-in-charge. 32 CHAIR WRITING MAP & FD (Drg no. FD/E 6/MAP/12 & FD-1107) S&F of seats of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from Engr in charge 33 S&F of backs of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from engr in charge. 34 REPAIR TO TABLE DRESSING GENTS (Drg no. FD-31 etc) M & L for providing following partrs of Table Dressing Gents including removing of old unsv parts complete all as spfd and as directed byEngr-in-Charge including french polishing:- Looking mirror 760mm x 380mm sizebeveled edge mirror of5 mm thick selected quality glass mounted on 5mm thickcommercial plywood with & includingall round frame of Sheesham wood complete all as spfd in drgfor mirror and its frame and as directed by the Engr-in-Charge. 35 S & F box complete box of table dressing gents with drawers and knobs made out of 18mm thick PPB Teak shade all as per drg after removing old damaged box. 36 TABLE DRESSING LADIES (Drg no. FD-32, FD-251 etc) M & L for providing following partrs of Table Dressing Ladies including removing of old unsv parts complete all as spfd and as directed byEngr-in-Charge including french polishing :- 37 S&F complete Box for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced with drawers. ISI marked with and including aluminium channel 12mm x 22mm all round complete. 38 Looking mirror 1200mm x 365mm sizebeveled edge mirror of5 mm thick selected quality glass complete all as spfd and as directed by the Engr-in-Charge. 39 TABLE WRITING (Drg no. FD-33/ 249 etc) S&F following parts of the table writing:- 40 Table top of size 1200mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified and directed. 41 Replacement of Leg with teak wood (Seasoned, without cracks, joints) 42 Replacement of side rail with teak wood (Seasoned, without cracks, joints) 43 Replacement of Stiffener with teak wood (Seasoned, without cracks, joints) 44 TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg no. FD-42, 55 & 231 etc) S&F for providing following parts including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :- 45 Leg 46 Frontor rearrail 47 Side rail 48 Stiffener 49 Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete 50 TABLE DINNING FOR 6 PERSONS (Drg no. FD-273 FD239 FD-1115 etc) 51 Table top of size 1500mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including POLISHEDbeading 4mm x 18mm all round complete. 52 Leg 53 Front or Rear rail 54 Side rail 55 TABLE 900MM X 600MM X 760MM WITH DRAWERS (Drg no. FD-283 etc) S&F for providing following parts including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :- 56 Leg 57 Frontor rearrail 58 Side rail 59 Stiffener 60 Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete 61 Drawer with lock complete as per drg as directed 62 TEAPOY (Drg no. FD-034, FD-278, FD232 etc) S&F for providing following parts of Teapoy including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :- 63 Front or Rear leg 64 Front or Rear rail 65 Side rail 66 Top of size 600mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete. 67 TABLE PEG (Drg no. FD-25, FD-277, FD-236 etc) S&F for providing following parts of Table Peg including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :- :- 68 Leg 69 Side rail 70 Table Top of size 450mm x 300mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete. 71 Front or Rear rail 72 TABLE CENTRE (Drg no. FD-292/ 352/ 74 etc) S&F for providing following parts of Table Centre including french polishingand also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :- 73 Front or Rear leg 74 Front or rear or side rail 75 Table Top of size 900mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete. 76 TABLE 900MM X 900MM X 760MM(Drg no. FD-88) S&F for providing following parts of table 900mm x 900mmm x 760mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :- 77 Table top of size 900mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete 78 TABLE DINNING 1200 X 900 X 760 MM OR SIMILAR TABLE OF SIZE(Drg no.FD-30 FD-273 FD239 FD-1115 etc) S&F for providing following parts of table dinning 1200 x 900 x 760 mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :- 79 Table top of size 1200mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete 80 Leg 81 Front or Rear rail 82 Polishingthe following items offurniture with French polish after cleaning and removing the durt with sand paper and prepration of surfaces with approprate wood putty and suitable colour, rubbing and cleaning it with sandpaper and applying two coats of wood polish for glossy look:- 83 Chair Dining (Drg no. FD-16, 223& 279) 84 Chair writing (Drg no. FD-20, 250) 85 Chair Easy (Drg no. FD-16, 223& 279) 86 Sofa set five seats (Drg no. FD-373) 87 Book Case (Drg no. FD-45 & 237) 88 Bed Ply Top (Drg no. FD-246 & 247) 89 Table dining for 6(Drg no. FD-39, 239, 273) 90 Table writing (Drg no. FD-41, 42) 91 Table dressing Gents (Drg no. FD-230) 92 Table dressing Ladies (Drg no. FD-31, 32) 93 Peg Table (Drg no. FD-25) 94 Table 3’ x 2’ (Drg no. FD-88, 284 & 284) 95 Table centre (Drg no. FD-274) 96 Teapoywooden (Drg no. FD-382, 232 & 34) 97 Side Board (Drg no. FD-75) 98 Sofa set 4 seats (Drg no. FD-281/373) 99 Table dining 8 pers (Drg no. FD-39, 239, 273) 100 Removingexisting old and unserviceable long rail from charpoy GI pipe and supply and fix new long rail of GI Pipe 32 mm bore medium gradeISI marked threaded at both end fixed in position complete all as directed and shown on drawing. (Drg No. FD-220) 101 Removing existing old and unserviceable short rail of charpoy GI and fabricationand fixing of short rail by cutting and converting from long rail obtained vide Srl item No 2 here in before threading both end complete all as shoiwn on drawing and as directed by Engr-in-Charge. (Drg No. FD-220) 102 Removing existing old and unserviceable legs from charpoy GI pipe and babrication and fixing of legs by cutting and converting from short rails as obtained srl Item No 22 here in before cutting and threading at one end and supply and fixing MS plate 3 mm thick, 40 mm dia by welding at other and of legs including provision of two parellel MS clamps made of 25x3 mm flat iron duly welded from MNF set fixed in position and painted with two coats of synthetic enaml paint black over coat of red oxide primer complete.(Drg No. FD-220) 103 Removing existing old unserviceable GI check nut from the frame of charpoy GI 32mm boreand supplying and fixing of new check nut, fixed in position all as shown in drg and as directed. (Drg No. FD-220) 104 Removing existing unserviceabel GI elbow 32mm dia from the frame of GI charpoy and supply & fixing of new Elbow GI 32mm ISI Marked and fixed in position all as shown in drg as directed. (Drg No. FD-220) 105 Material and labour for electric welding of long/short rails, legs of GI Charpoy frame of size 32mm and 25mm by continuous welding around with the joint complete all as specifed and as directed by Engineer-in-Charge. (Drg No. FD-220) 106 Removing exising old/wornout/unserviceable 12mm thick ply top / MDF top from the top of charpoy GI 32 mm and replacement of 12mm thick plywood with single peice ply from long rail to longrail and short rail to short rail properly fixed by supply and fixing and make it fit with 6mm smooth head nut bolts with two nos washirs. (Drg No. FD-220) 107 Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit(Rs. 75,721.50) and if any other reduction.
