Tender For Repair To Wooden Furnitures And Canning Of Different Kinds Of Wooden Furnitures Under Ge Mh And Rh Khadki, Pune-Maharashtra

Repair To Wooden Furnitures And Canning Of Different Kinds Of Wooden Furnitures Under Ge Mh And Rh Khadki; 1.00 Chair Dinning (FD-279):-Removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items and supply and fixing new same components/ parts made out of 1st class hard wood teak complete all as shown in drawing and directed by Engineer in charge. 1.01 Rear leg of size 890x55x30mm 1.02 Front leg of size 460x55x30mm 1.03 Side/Front/Rear rails of size 420x30x65mm 1.04 Stiffener (Side & Central one) of size 420x25x20mm 1.05 Back rest of size 420x45x15mm 1.06 Triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining. 1.07 Tightening of all parts/joints of whole Chair dining with bamboo pins. 1.08 PVC/hard rubber shoe 2.00 Chair Writing (FD-280) :-Removing of unserviceable/broken following parts of Chair Writing without damaging of other parts of chair writing and supply and fixing new parts made out of 1st class hard wood teak complete all as shown on drg and specified. 2.01 Rear leg of size 890x30x55mm 2.02 Front leg of size 460x55x30mm 2.03 Side/Front/Rear rails 530x30x65mm 2.04 Back rest of size 530x25x20mm 2.05 Stiffener (Side & Central one) of size 530x25x20mm 2.06 Arms 470x60x25mm 2.07 Triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Writing. 2.08 Tightening of all parts/joints of whole Chair Writing with bamboo pins. 2.09 PVC/hard rubber shoe 3.00 CHAIR EASY (FD-229) Removing of following unserviceable/broken parts of Chair Easy without damaging of other parts of chair and supply and fixing same new parts made out of 1st class hard wood teak complete all as shown on drg and specified. 3.01 Front/Rear leg of size 490x55x25mm 3.02 Front/Rear stiffener as per drawing. 3.03 Arms of size 610x65x25mm. 3.04 Front & back rail of seat/back of size 510x55x25mm. 3.05 Side rail of seat/back. 3.06 New seat frame complete all as specified and shown in drg and directed by the Engineer in charge. 3.07 All as per Srl. Item No. 3.06 here-in-before but back frame of chair easy. 3.08 Tightening of all parts/joints of entire Chair Easy with bamboo pins. 3.09 triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Easy. 3.10 PVC/hard rubber shoe 4.00 Table dining 6/8 persons (FD-273, FD/MAP-II/03) 4.01 Material & labour for removing unserviceable Top and Supply and fix new top of table dining 6 persons of size 1500x900mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top of table dining 6 persons of size and shape as shown in drawing complete all as shown on drg. 4.02 All as per Srl. Item No.4.01 but top of Table dining 8 persons of size 1800 x 900mm. 4.03 New legs of size 75x40x750mm complete all all as shown on drg. 4.04 All as per Srl. Item No. 4.03 but long rails for 6 persons size and shape complete all as shown on drg. 4.05 All as per Srl. Item No. 4.03 but long rails for 8 persons. 4.06 All as per Srl. Item No.4.03 but side rails for 6/8 persons. 4.07 All as per Srl. Item No. 4.03 but wooden bracket of size 100x100x25mm for table 6/8 persons. 4.09 PVC/hard rubber shoe 5.00 Bed Plywood Top (FD-246 & 247):- Removing the unserviceable components/ parts without damaging the other existing components/ parts or structure of the following items and supply and fixing new components/ parts complete all as shown in drawing and directed by Engineer in charge. 5.01 Long rails of size 1980x900x35mm made of 1st class hard wood teak of bed plywood top. 5.02 Teak face venner ply wood 3mm thick for outer and inner sides of head board with teak wood beading half round alround of bed plywood top. 5.03 All as per Srl. item No. 5.02 here-in-before but foot board. 5.04 Plywood BWR Gde as per IS:303 of size 1980 x 900 x 12mm thick (Make of Plywood:- as per Key specification) 5.05 Stiffners of size 60x40x900mm made of 1st class hard wood teak of bed ply top. 5.06 Head rest with legs of bed plywood top shape and size complete all as shown on drg. 5.07 All as per Srl. Item No. 5.06 here-in-before but foot rest of bed plywood top. 5.08 1st class hard wood teak wooden bracket of size 150x150x35mm with steel screw between the long rail and legs of head board and foot board of bed plywood top. 6.00 Table dressing Ladies with Mirror (FD-251, FD/MAP-II/07) 6.01 Material & labour for removing unserviceable looking Mirror of table dressing and Supply and fix new looking mirror of 5 mm thick (Make:- as per key specification) of size and shape complete all as shown on drg and as directed by Engineer in charge. 6.02 Material & labour for removing unserviceable frame of Mirror and Supply & fix new frame of mirror of table dressing ladies of 1st class hard wood teak wood of size and shape as shown on drg and directed by Engineer in charge. 6.03 Material & labour for removing unserviceable back of table dressing mirror and Supply & fix new back of 6mm thick MR Gde plywood complete all as shown on drg and as directed by Engineer in charge. 6.04 Material & labour for removing unserviceable cabinet/box and Supply & fix entire new cabinet/box of table dressing ladies made of 18/19mm thick Prelaminated Particale Board with 4mm thick teak wood beading complete all as shown on drg. 6.05 All as per Srl. Item No. 6.04 but drawers of table dressing ladies. 6.06 Chromium plated knob 25mm dia 24mm length of best quality as approved.For item No - 6.04 7.00 TABLE DRESSING GENTS :(FD-230/31) 7.01 Material & labour for removing unserviceable Looking Mirror and Supply and fix new 5mm thick looking mirror to table dressing gents (Make:- as per key specification) size and shape as shown on drg complete all as directed by Engineer in charge. 7.02 Material & labour for removing unserviceable cabinet/box and Supply & fix new entire cabinet/box made of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging complete all as shown on drg 7.03 Material & labour for removing unserviceable drawers and Supply and fix new drawers to table dressing gents of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black) complete all as specified and shown on drg. 7.04 Material & labour for removing unserviceable frame of mirror and Supply and fix new frame of mirror made of 1st class hard wood teak incl key plate size and shape complete all as shown on drg. 7.05 Material & labour for removing unserviceable back and Supply and fix new back ply of mirror made of 6mm thick MR Gde plywood size and shape complete all as shown on drg. 7.06 Fixing only fitting of loose / dismantaled / sagged table dressing gents to the wall with L Bracket (Pair) as per drg and all accessories such as screw, clips, plugs, clamps, etc complete all as directed by Engineer in charge.Note : Rate of bracket (pair) shall be deemed to be included in unit rate quoted. 8.00 TABLE BED SIDE (FD-276) 8.01 Material & labour for removing unserviceable table top and Supply & fix new table top of 18/19 mm Thick prelaminated Particle board exterior grade for of same size and shape all as per drg. 8.02 Material & labour for removing unserviceable side and Supply & fix new 18/19 mm Thick prelaminated Particle board exterior grade for side of table of same size and shape complete all as per drg. 8.03 Material & labour For removing unserviceable shelf and Supply & fix new 12 mm thick prelaminated Particle board exterior grade for shelf of same size and shape. 8.04 Material & labour for removing unserviceable back and Supply & fix new 6 mm thick BWR ply wood for back BWR grade complete all as specified and shown in drg. 9.00 PEG TABLE (FD-277) 9.01 Material & labour for removing unserviceableTop and Supply and fix new top of size 450x300mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround complete all as shown on drg. (Make of Particle board:-as per key specification) 9.02 Material & labour for removing unserviceablel egs and Supply and fix new legs of size 50x30mm made of 1st class hard wood teak size & shape complete all as shown on drg. 9.03 All as per item No 9.02 here-in-before but long batten/rail of size 40x20mm of table peg. 9.04 All as per item No 9.02 here-in-before but short rail/stiffener of size 40x20mm of table peg. 9.05 Corner made of 1st class hard wood teak to strengthen rail and leg complete all as specified by Engr-in Charge. 9.06 PVC/hard rubber shoe heavy duty complete all as directed by Engineer in charge. 10.00 SIDE BOARD (FD-1112) 10.01 Material & labour for removingunserviceable shutters and Supply and fix new pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including continuous piano type hinges and hasp & stapple of size and shape complete all as specified and shown in drg including aluminium anodized knob as shown on drg. 10.02 All as per Srl item No 10.01 here-in-before but side of side board complete all as shown on drg. 10.03 All as per item No. 10.01 here-in-before but top of side board. 10.04 Material & labour for removing unserviceable bottom and Supply and fix new bottom of side board made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg. 10.05 Material & labour for removing unserviceable back and Supply and fix new back of side board with 6mm thick MR Gde plywood of size and shape complete all as specified and shown on drg. 10.06 Material & labour for removing unserviceable drawers and Supply and fix new drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape as shown on drawing complete all all as specified and shown on drg. 10.07 Material & labour for removing unserviceable shelf and Supply and fix new shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beadling complete all all as shown on drg. 10.08 Material & labour for removing unserviceable legs by Supply and fix new leg with batten frame of side board made of 1st class hard wood teak of size and shape as shown on drawing complete all as shown on drg. 11.00 TABLE CENTRE (FD-274) 11.01 Material & labour for removing unserviceable and Supply and fix new top of table centre of size 900x450mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround complete all as shown on drg. (Make as per key specification) 11.02 Material & labour for removing unserviceable legs and Supply and fix new legs of table centre of size 60x30mm made of 1st class hard wood teak size and shape as shown on drg.complete . 11.03 All as per Srl. item No. 11.02 here-in-before but short rail/stiffener of size 50x25mm. 11.04 All as per Srl. item No. 11.02 here-in-before but long rail of size 50x25mm. 11.05 Supply and fixing with steel screw triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Table Centre all as shown on drg. 11.06 Supply and fixing PVC/hard rubber shoe heavy duty complete all as directed by Engineer in charge. 12.00 Teapoy:- (FD-232 & 278 & 382) 12.01 Material & labour for removing unserviceable Top and Supply and fix new top of teapoy of size 600x450mm made of 18/19mm thick Prelaminated Particale Board exterior grade including 4mm thick teak wood beading alround complete all as shown on drg. (Make as per key specification) 12.02 Material & labour for removing unserviceable legs and Supply and fix new legs of teapoy of size 60x30mm made of 1st class hard wood teak of size and shape as shown on drg. 12.03 All as per item No 12.01 here-in-before but short stiffener/rail of size 60x25mm and shape as per show on drg. 12.04 All as per item No 12.01 here-in-before but long batten/rail of size 50x25mm & shape as per shown on drg. 12.05 Supply and fixing with steel screw triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Teapoy as per shown on drg. 12.06 Supply and fixing PVC/hard rubber shoe complete all as directed by Engineer in charge. 13.00 TABLE WRITING (FD-249 /275) 13.01 Material & labour for removing unserviceable Top and Supply and fix new top of size 1145x600mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top of table writing size and shape complete all as shown on drg . (Make of Partical board:-as per key specification) 13.02 Material & labour for removing unserviceable legs and Supply and fix new legs of size 55x35x750mm made of 1st class hard wood teak size and shape complete all as shown on drg. 13.03 All as per Srl. Item No. 13.02 but stiffners (Centre) of size 50x25x 1145mm made of 1st class hard wood teak. 13.04 All as per Srl. Item No. 13.02 but side stiffener/rails of size 50x25x550mm of Table writing. 13.05 Material & labour for removing unserviceable drawers and Supply & fix new drawers of size (as per Drg)made of 18/19mm thick Prelaminated Particale Board natural teak face shade on front side including with 6 mm thick ply wood to bottom of drawers including aluminium anodised knob complete all as shown on drg. 13.06 Material & labour for removing unserviceable box/cupboard and Supply & fix new Box/cup board of table writing made of 18/19mm thick Prelaminated Particale Board including wall catcher size and shape complete all as shown on drg. 13.07 All as per Srl. Item No. 13.06 but door shutter of cupboard. 13.08 Supply and fixing with steel screw triangular bracket of size 100x100x35mm of 1st class hard wood teak between legs and rails of Table writing complete all as shown on drg. 14.00 Table 900x600x760mm with/without drawer (FD-224 & 284) 14.01 Material & labour for removing unserviceable Top and Supply and fix new top of table 900x600x760mm made of 18/19mm thick MDF board exterior grade including 4mm thick TW edging/beading alround to top to table with or without drawers, size and shape complete all as shown on drg. (Make as per key specification). 14.02 Material & labour for removing unserviceable legs and Supply and fix new legs made of 1st class hard wood teak of size 60x30x750mm and shape complete all as shown on drg. 14.03 All as per Srl. Item No. 14.02 but stiffner (centre one) of size 40x25mm . 14.04 All as per Srl. Item No. 14.02 but side stiffner. 14.05 All as per Srl. Item No. 14.02 but long rails . 14.06 All as per Srl. Item No. 14.02 but short rails . 14.07 Supply and fixing with steel screw triangular bracket of size 100x100x35mm of 1st class hard wood teak between legs and rails of Table 900x600x760mm complete all as shown on drg. 14.08 Supply and fix PVC/hard rubber shoe complete all as directed by Engineer in charge. 15.00 Table 1200 x 900mm. (FD 273) 15.01 Material & labour for removing unserviceable Top and Supply and fix new top of table dining 4 persons of size 1200x900mm made of 18/19mm thick Prelaminated Particale Board exterior grade (Make :as per Key specification) including 4mm thick TW edging alround to top to table dining 4 persons of size and shape complete all as shown on drg. 15.02 Material & labour for removing unserviceable legs of table dinning 4 persons and Supply and fix new legs of size 90x45x750mm made of 1st class hard wood teak, size and shape complete all as shown on drg. 15.03 All as per Srl. Item No. 15.02 but long rails table dinning 4 persons. 15.04 All as per Srl. Item No. 15.02 but side rails table dinning 4 persons. 15.05 All as per Srl. Item No. 15.02 but wooden bracket of size 100x100x35mm for table dinning 4 persons. 15.06 Supply and Fix PVC/hard rubber shoe as directed by Engr in Charge. 16.00 BIN LINEN MULTIPURPOSE (FD/E6/MAP/09) 16.01 Material & labour for removing unserviceable shutters of bin linen multipurpose and Supply & fix new shutters made out of 18/19mm thick Prelaminated Particale Board including continuous piano type hinges and Magnatic Catcher of size and shape complete all as specified and shown in drg or as directed by Engineer in charge. 16.02 All as per Ser item No 16.01 here-in-before but side all as shown on drg. 16.03 All as per item No. 16.01 here-in-before but top. 16.04 All as per item No. 16.01 here-in-before but bottom out of only 18/19mm thick Prelaminated Particale Board of size and shape complete all as shown on drg. 16.05 Material & labour for removing unserviceable back and Supply and fix new back with 12mm thick MR Gde plywood of size and shape complete all as required and shown on drg. 16.06 Material & labour for removing unserviceable drawers and Supply and fix new drawers made of 18/19mm thick Prelaminated Particale Board with 6mm thick ply at drawer bottom incl knob of size and shape complete all as specified and shown on drg. 16.07 Material & labour for removing unserviceable shelf and Supply and fix new shelf made of 18/19mm thick Prelaminated Particale Board with 6mm thick teak wood beadling complete all as shown on drg. 17.00 BOOK CASE (FD-45) 17.01 Material & labour for removing unserviceable Top and Supply and fix new Top of book case made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet with 4mm thick teak wood beading alround size and shape complete all as shown on drg. 17.02 All as per Srl. Item no. 17.01 but sides of book case. 17.03 All as per Srl. Item No. 17.01 but shutters of book case including piano hinges and aluminium anodized knob. 17.04 Material & labour for removing unserviceable bottom and Supply and fix new bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beadling complete all as shown on drg. 17.05 All as per Srl. Item No. 17.04 but shelf of book case. 17.06 Material & labour for removing unserviceable back and Supply and fix new back of book case made of 6mm thick MR Gde plywood complete all as shown on drg. 17.07 Material & labour for removing unserviceable leg and Supply and fix new leg with batten frame of book case made of 1st class hard wood teak of size and shape complete all as shown on drg. 18.00 Chair Dinning Cushioned (FD/MAP-II/04):-Removing of unserviceable/broken following parts of Chair dining cushion without damaging of other parts of chair and supply and fixing same new parts complete all as shown on drg and specified and directed by Engineer in charge. 18.01 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestry cloth shall not be less than Rs. 250/- per RM). 18.02 Seat cover of tapestry cloth (Tapestry cloth shall be not less than Rs. 250/- per RM). 18.03 Front leg of size 450x35x50mm 18.04 Rear leg of size 450x35x50mm 18.05 Back Vertical strips 500x15x50mm 18.06 Back rest 450x25x45mm 18.07 Stiffener (Side & Central one) 450x20x25mm 18.08 Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. 19.00 Chair Easy cushioned:- (FD-358):- Removing of unserviceable/broken following parts of Chair easy cushion without damaging of other parts of chair and supply and fixing new parts complete all as shown on drg, specified and as directed by Engineer in charge. 19.01 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM as approved by GE). 19.02 All as per Sr. item No 19.01 here-in-before but back of chair easy cushioned. 19.03 Seat and Back cover of tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM). 19.04 Front leg of size 545x70x25mm 19.05 Rear leg of size 545x70x25mm 19.06 Back frame of size 545x55x20mm 19.07 Side rail of size 545x70x25mm 19.08 Arms of size 545x65x25mm with cushion 19.09 Triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair easy cushioned complete all as shown on drg. 19.10 PVC/hard rubber shoe complete all as directed by Engr in Charge. 20.00 Taking down carefully unserviceable cane from different types of chairs and other furniture articles and M&L for recaning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown and directed by Engineer in charge.

INR 500 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB