|
| 1 | Supply, install, fixing and commissioning split type air conditioner of capacity 1.5 TR, five star rated, BEE 3.2 of capacity with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, star rated suitable for wall mounted, single phase, 230/250 volt AC including breaking necessary hole in wall for fixing indoor and outdoor unit and making good to disturbed surfaces with mortar to match with existing finishes after commissioning, making necessary connections unplasticised PVC pipes medium duty 25 mm dia for draining out condensed water all as required including necessary connection complete all as specified and directed. |
| 2 | M & L for sub main wiring with 2 single core 6 Sqmm PVC unsheathed and PVC insulated stranded copper conductor cable in and including rigid 25 mm dia PVC conduit and 6 Sqmm PVC insulated unsheathed contineous earth wire and connected to earth dolly and making good disturbed surfaces with cement mortar and paint to match existin surface complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed |
| 4 | M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed. |
| 5 | S&F 300x300 mmx7-8 mm thick ceramic non skid tilesin floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 20mm thick screed bed in cement morta 1:6 complete all as specified and directed. |
| 6 | ditto- but skirtingincluding10 mm thickrendering in cement mortar 1:4, complete all as specified anddirected. |
| 7 | S & F mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole complete. |
| 8 | S&F 15 mm bore bib taps, with wall flange long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed downscrewed for iron pipe or for brass furrel complete in repairs |
| 9 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 10 | S&F of stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions complete all as specified and directed. |
| 11 | S& FChromium plated stainless steel (Grade S-304)(heavy) grating minimum 3 mm thick of size 125mm dia for trap |
| 12 | Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long). |
| 13 | S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 14 | S&F110 mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 15 | M & L Cast iron floor trap of 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 16 | Supply and fixing 15 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 17 | Supply and fixing 20 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 18 | M&L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed. |
| 19 | M & L Preparation of old decorated surface of wall incl cornice etc and applying one coat oil bound distemper and application of paint through mechanical means complete all as specified and directed. |
| 20 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etccomplete. |
| 21 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/\ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 22 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virginpolymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 23 | S&F Door closer hydraulicallyaluminium bodyregulated,designation No. 3,universal type, suitablefor door shutters of 851 to 1000 mm in widthand of weight between61 to 80 kg and fixed |
| 24 | S&F 100mm Aluminum hinges, complete type B-21 |
| 25 | S & F200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed |
| 26 | S & F 150 mm size aluminium handles \"D\" Type ISI brand cast type, anodised complete. |
| 27 | S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 28 | S&F Sheet glass,6.3 mm ordinary quality and glazing with oil putty in squareexc 0.5 sq. m in each paneextra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side |
| 29 | S&F Sheet glass,6.3 mm ordinary quality and glazing with oil putty in squareexc 0.5 sq. m in each pane all as specified and directed. |
| 30 | M&L powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50mm and bottom rail150.00X 44.50 X 2.50mmincl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed. |
| 31 | Brickwork with subclass \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed. |
| 32 | M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 33 | M&L forNon Skid ceramic tilescoloured (square/ rectagular) area of each tile exceeding 0.09 Sqm but not exceeding 0.38 Sqm in floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match including 15mmthick screed bed layer in CM (1:4) for lying floor finished complete all as specified. |
| 34 | M&L for Glazed ceramic tiles in vertical surface 600x 300x7 mmthick joint lesstiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).complete all as specified and directed. |
| 35 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed |
| 36 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement complete all as specified and directed |
| 37 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceilingcomplete all as specified and directed |
| 38 | M&L for preparation of new plaster surfaces of wall & ceilingand applying two coats of oil bound distemper over one coat of primer including 1 mm thick wall care puttycarcomplete all as specified and directed by Engg-in-Charge. |
| 39 | Material & Labour for PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as directed. |
| 40 | Supply & Fixing for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes andfixed to walls complete all as specified and directed. |
| 41 | Supply & Fixing for 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes andfixed to walls complete all as specified and directed. |
| 42 | S & F of 150 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 43 | S&FPVC SWR (110) bends any radius comlete all as specified and directed. |
| 44 | S&F 75 mm PVC (SWR) junction single, (singl T )(equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doorsbranches .complete all as specified and directed. |
| 45 | S&FPVC SWR (150) bends any radius comlete all as specified and directed. |
| 46 | S& F 110 mm PVC (SWR)vent cowl. Complete all as specified and directed. |
| 47 | M&L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 48 | S&F High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 of 38/40mm borefixed complete to walls,ceilings or in floors etc complete all as specified and directed. |
| 49 | Taking down 15 mm dia steel tubing and connections including accessary etc all as specified and directed. |
| 50 | Taking down 20 mm dia steel tubing and connections including accessary etc all as specified and directed complete. |
| 51 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 52 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum specification as per IS 15931: 2012 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion |
| 53 | S & F factory made28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size,modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof specification as per IS 15931: 2012 and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion |
| 54 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed |
| 55 | S&F 100 mmlong Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodizedcomplete all as specified |
| 56 | S&F 150 mm long aluminium alloy handle cast type anodized. complete |
| 57 | Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exceeding half brick but not exceeding one brick complete. |
| 58 | S & F in repair 15 mm borefancy type health faucet with SS hose complete all as specifiedMake:- Cera Cat Part No F 8030106AB or Equivalent of JAQUAR/ESS ESS |
| 59 | S & F in repair CP Tumbler Holderall as per specified and directed. Make:- Cera Cat Part No F 5007107 or Equivalent of JAQUAR/ESS ESS |
| 60 | S/F in repairs SOAP DISH holder all as specified (Make Jaquar . Jaquar cat no: AKP 35731P as approved by Engr-in-chge. |
| 61 | S&Fin repairs fancy type Pillar taps, castcopper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lattered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm diairon pipe all as specified Make: or Equivalent of JAQUAR/ESS ESS |
| 62 | S & F in repair 15 mm bore fancy type bib taps long body(two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.Make:- Cera Cat Part No F 1015163 or Equivalent of JAQUAR/ESS ESS |
| 63 | S & F in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator complete all as specified and directed. Make:- Cera Cat Part No F 1015401 or Equivalent of JAQUAR/ESS ESS |
| 64 | S&F in repair touch screen LEDlooking mirror of selected 1st quality minimum 5mm thickas per site requrement complete all as specifiesd and directed |
| 65 | Supply and fix in repair vitreous china counter wash hand basin snow white miniumum size560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications. Make : Jaquar/parryware or equivalent etc |
| 66 | M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 67 | S/F in repair Towel rail 600mm all as specified (Make Jaquar or equivalent). Jaquar cat no:AKP 35711P as approved by Engr-in-chge. |
| 68 | S/F in repair Towel ring all as specified (Make Jaquaror equivalent). Jaquar cat no: AKP 35721P as approved by Engr-in-chge. |
| 69 | S & F in repair Autocut Hydrolic (soft closing) stainless steel hingesopenable at 0 degree for kitchen cabinet shutters complete all as specified and directed. |
| 70 | S & F 18-19 mm thick HDHMR board prelaminated one side with decorative choice lamination exterior grade , fixed with screw /hinges with frame wk as in cupboard and kitchen cabinet shutters and all other similar wks completed.Make action tesla/grren ply/century ply or eqvt |
| 71 | S&F Cast brass handles , each 150mm long |
| 72 | S&F Cast brass handles , each 100mm long |
| 73 | S & F cast brass butt hinges medium weight cold rolled 100 mm long complete. |
| 74 | S & F cast brass butt hinges medium weight cold rolled 75 mm long complete. |
| 75 | S & Fmagnet catcher for cupboard complete |
| 76 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm \"white\" with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications.Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of \"Cera\" or equivalent model of make specified in Appendix \"B\" to particular specifications as approved by Enginr-in-Charge. |
| 77 | S & F in repair Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair,complete all as specified and directed. Make :- Prayag cat no. 6711, techno-commercially equivalent model in Jaquar or Cera. |
| 78 | S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed. |
