Repair/Renovation Of Vip 2 Including (Construction Of Security Room) At Wazarat Road, Jammu. Cno-219 Np- 1 Labour engaged for uprooting of unwanted vegetation/cleaning of deep drain, collection of rubbish to dumping site.(5 labour for 3 days) 2 Providing and fixing WPC panelling of superior quality incl supply of accessories and fixing complete 3 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil 4 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 6 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete 7 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 8 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent 9 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 10 Providing and fixing wall paper of superior quality including supply fixing complete incldudes preparation of surface by way of putty primer complete 11 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours.The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.For the purpose of measurement the entire treated surface will be measured. 12 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm thickness 13 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class teak wood 35mm thickness 14 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) 15 Hydraullic Door (Godrej Antique) 16 Door Handles Antique 17 Tower Bolt Brass 8 18 Tower Bolt Brass 6 19 Raising of Lawn by way of spreading good earth (trollies) 20 Labour for spreading good earth including carriage from dumping site to lawn 21 Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 meters lead :15.12.1 Of area of 3 sqm. and below 22 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.15.23.1 For thickness of tiles 10 mm to 25 mm 23 Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.7.4 In cement mortar 24 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 25 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 26 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood 27 Sal Wood 28 2nd class deodar wood 29 Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures 30 2 carpenter for 5 days 31 1 Helper to carpenter for 5 days 32 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.99.8.8.1 Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type 33 Providing and fixing of waterproof finish door 34mm thick with 1.0mm thick sunmica (Green, Century, Amulya or equivalent make) on both side incl. pasting by adhesive and all accessories like hinges, tower boltlock (Harisson, Godrej) and Handles etc. complete job. 34 Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).9.6.3 Second class deodar wood 35 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood 35mm 36 Second class teak wood 35mm 37 Providing and fixing 19mm thick ply of approved quality and manufacture complete.(Green, Century, Amulya) 38 Providing and fixing 6mm thick plyof superior quality (Green, Century, Amulya) 39 Providing and fixing 1.00mm thick mica of superior quality (Green, Century, Amulya) 40 Providing and fixing nickel plated M.S. pipe for curtain rods 41 Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters including fixing with necessary screws etc. complete. 9.116.2 Double strip (Horizontal type) 42 Renewing glass panes and re-fixing existing wooden fillets:14.8.1 Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm) 43 Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.13.88.2 2 mm thick 44 French spirit polishing, Two or more coats on new works including a coatof wood filler.NEW WORK 45 Old work 46 Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface. 47 Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work (Nerolac, Asian) 48 Finishing walls with 100% Premium acrylic emulsion paint havingVOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over& including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 49 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade 13.70.1 Two or more coats on new work 50 Providing and fixing sliding channel (Hettich or equivalent) 51 Providing and fixing PVC panelling 5 to 6mm thick heavy duty complete. 52 Providing and fixing wooden flooring superior quality (Action/TESA) 53 Providing and fixing hydraulic hinges (Godrej, Hetich or equivalent) 54 Providing and fixing powder coated CGI sheet including supply/fixing complete. 55 Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded 56 Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes12.58.2 110 mm diametre 57 Cleaning of terrace/loft water storage tank (inside surface area) upto2000litre capacity at all heights with coconut brushes, duster etc., removal ofsilt, rubbish from the tank and cleaning the tank with fresh waterdisinfecting with bleaching powder @ 0.5gm per litre capacity of tankincluding marking the date of cleaning on the side of tank body with thehelp of stencil and paint and disposing of malba all complete as perdirection of Engineer-in-Charge. (The old date already written on tankshould be removed with paint remover or black paint and if date is notwritten with the stencil or old date is not removed deduction will be made@ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock isdamaged that is to be repaired by contractor at his own cost and nothingextra will be paid on this account) 58 Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre,two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications 59 Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 60 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. 61 Providing and fixing door lock of all complete as specified and asdirected by the Engineer-in-Charge (Link Godrej Harrision or equiv) 62 Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls 63 Suspended floors, roofs, landings, balconies and access platforms. 64 Providing and fixing 5mm thick printed/bevelled glass for centre partition 65 Engaging welder to carry out the existing steel work by way of cutting, welding complete incl. hire charges of welding set and helper including electrodes for 15 days 66 Providing and laying matt finished vitrified tile of specified size havingwater absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, courtyard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.16.91.2 300x300x9.8 mm 67 Chequerred precast cement concrete tiles 22mm thick in footpath andcourtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .11.29.3 Dark shade using ordinary cement. 68 Site clearance of work by engaging labour after completion of work. 69 Disposal of dumped mulba beyond Municipal Limit by way of engaging Mechanical Transport including loading and unloading complete. 70 Providing and fixing UV sheet of approved quality and make. 71 Providing and fixing Aluminum frame work with all necessary fixtures and making good the surface with 18 guage thick aluminum and powder coated surface of ivory shade including hinges, window /door shutters with panel inserts of 4 mm Glass/ACP sheet and epdm rubber strips at junctions including handles, locls, tower bolts etc. Complete job as per direction of Engg. I/C. 72 Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 73 Providing and fixing PVC Tank Lid Coverall complete as specified and asdirected by the Engineer-in-Charge. 74 Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of thenew tiles or brick excluded) within 50 meters lead. 75 Providing and fixing base cabinets for modular kitchen comprising of box made of ISI marked BWP 710 grade plywood, Type-A bond (phenol formaldehyde), both side laminated, bead auto edge banding tape, backing of 6 mm ACP sheet (Alstone make), SS 90° hinges with 0° crank (KAFF, HAFELE or equivalent), shutters with high gloss laminate, four-side edge banding tape, superior quality GI profile handles, accessories including Tandem drawer set, PVC cutlery tray, dish rack, 100 mm adjustable PVC legs, 100 mm PVC skirting with brackets and cover, cabinet connectors for fixing, cabinet depth 600 mm (including L-shaped CP unit). Complete as per Engineer’s direction. (Payment for front items separately) 76 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank
