Tender For Purchase Of Uhwc Instruments , Instrument List , Technical Specification Of Sphygmomanometer Aneroid 300Mm With Cuff Key Technical Specifications: Cuff: Typically Made Of Durable, Washable Material (E.G., Nylon) And Reinforced At The Sides. Siz, pimpri-Maharashtra

Purchase Of Uhwc Instruments , Instrument List , Technical Specification Of Sphygmomanometer Aneroid 300Mm With Cuff Key Technical Specifications: Cuff: Typically Made Of Durable, Washable Material (E.G., Nylon) And Reinforced At The Sides. Size: Ranges From Child To Adult Sizes (Small, Medium, Large, Extra-Large), And Ideally, The Cuff Bladder Length Should Be At Least 80% Of The Patients Arm Circumference And The Width At Least 40%. Fastening: Usually Features Velcro Or Similar For A Secure Fit. Bladder: Inflatable Bag Within The Cuff, Connected To The Inflation System. Inflation System: Bulb With A Valve For Inflating The Bladder And A Pressure Release Valve. Gauge: Aneroid: Features A Dial With A Needle Indicating Pressure, Usually Graduated In 2 Mmhg Increments From 0 To 300 Mmhg. Digital: Provides Electronic Readings Of Blood Pressure And May Include Features Like Pulse Rate Measurement. Tube: Typically Made Of Rubber Or Silicone, Crack-Resistant, With A Length Of Around 70 Cm. Accuracy: Aneroid Gauges Are Generally Calibrated To Meet Certain Accuracy Standards, Such As +/- 3 Mmhg. Materials: Materials Used In Sphygmomanometers Must Be Durable, Corrosion-Resistant, And Suitable For The Intended Use. Environmental: Sphygmomanometers Are Designed To Function Within Specific Temperature And Humidity Ranges, Typically 5 To 40°C And 15 To 85% Rh. , Technical Specification Of Iv Stand • Saline Stand Should Have Strong Ms Tubular Construction Mounted On Five Pronged Base Fitted With Swivel Castors Of 50Mm Diameter. • Stainless Steel Saline Rod Should Have Double Hooks. Stainless Steel • I.V. Rod Should Be Height Adjustable From 1620Mm To 2340Mm. All Mild Steel Components Should Be • Thoroughly Pre-Treated Chemically To Remove Rust And Foreign Matter Like Grease, Oil Etc. By Dip Tank • Process Pre-Treatment System. The Treated Metal Surface Should Be Coated With Epoxy Polyester • Powder And Oven Baked At 180 Degree To 200 Degree Centigrade To Avoid Contamination Of The Clean • Metal Surface From Dust Particles • Iso Certification , Haemoglobinometer –Set Sahil Type Complete • With Square Tube, Brush, Water Bottle , Tracking Bag And Tickler Box Immunization , Technical Specification For Suction Machine. • Power Supply: 230-240V/50Hz • Double Overflow-Protection System (Bottle And Pump). • The Safety Device Protects The Pump Against Overflow: Suction Is Interrupted When Liquids Reach The Safety Level In The Small Jar. • All Components Are Reusable And Can Be Steam Sterilized At 134°C. • Connection Tube: Silicone Tubing • Suction Tube: Reusable Silicone Tube: • Should Be With Safety Device. • Bottle /Jar Overflow Protection Device. • Oil Free Lubrication Pump • Machine Should Be Iso Mark , Technical Specification For Stabilizer • Should Work For Input Voltage Range Of 100-240 Volt Ac Single Phase With High Input Voltage Cut At 240 Volt And 2.5 Kva • Step Up Voltage – 10 Volt Per Stage. • Overload Protection At Input Automatic Cut-Off Time-Between 2-4 Seconds Of Under Voltage/Over Voltage Cutoffat Output. • Maximum Power Loss Due To Leakage Of Current-2% • Restart Delay Of 6-9 Minutes After The Cut-Off Along With Quick Start Button. • The Output Voltage Should Be Stable And Capable Of Operation Continuously With Respect To Any Change In Ambient Temperature And Regulation Should Be Automatic. •Automatic Line Voltage Stabilizer (Step Type) Should Be Of Copper Wound Complete With Voltmeter (Digital/Analog) With Selector Switch To Indicate Input And Output Voltage And Construction Conforming To Is:8448/1989 Reaffirmed 2003. • The Output Side Shall Be Provided With Mcb Of Suitable Rating Duty Isi Marked. • Provision For Two Output Sockets Of 15 Amps, Isi Marked. •Details Of Transformer Should Be Furnished, Such As Rating, Weight Of Winding And Core, Which Should Be Verified During Inspection. • A Metal Oxide Varistor (Mov) For Surge Suppression Should Be Provided And Connected Directly On The Power Line. • 4 Line Emitting Diode Should Be Provided To Indicate Power Input, Power Output Equipment In Standby Condition And High Input Voltage. • Stabilizer Should Be Isicertified& Marked. , Technical Specification For Vaccine Carrier • Vaccine Storage Volume 1.7 Litter • Weight Full Loaded 4 Kg • Weight Empty 1.6 • External Dimensions ( L*W*H*) 25*25*28.5 • External Dimensions (L*W*H*) 17*17*18.5 • Cold Life At +43 Degree C. • Warm Life A -20 Degree C. • Cold Life At 43 .. -6 Hrs. • With 4 Ice Pack , Technical Specification •Ice Pack 300Ml

INR 6048 /-

INR 22.40 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB