Tender For Provn Of Icu Ot Hdu And Allied Ancillaries In Mh Ranikhet; 1 PHASE-ISCHEDULE A PART-I (BUILDING WORK) 2 Construction of block of Tech Building for Hospital ICU, OT, HDU and allied ancillaries alongwith RCC covered ramp ( G+1)(RCC Framed Structure) ,with permanent specification including plinth protection all as shown on drawings and as specified. 3 Construction of block ofPump House(RCC Framed Structure) ,with permanent specification including plinth protection all as shown on drawings and as specified. 4 Construction of Under ground Static water tank of capacity 100 KL, complete all as shown on drawings and as specified. 5 SCHEDULE A PART II-A (Internal Water Supply) for details refer Sch A in pdf folder 6 SCHEDULE A PART II-B (Internal Water Supply) 7 S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all specified and directed. 8 S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed. 9 S&F Brass Chromium Plated Angle Valve, fancy typescrewed for iron pipe suitable for 15 mm bore pipes complete all specified and directed. 10 S&F Brass Chromium Plated shower rose with 150 mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes, complete all specified and directed. 11 SCHEDULE A PART III-A (Internal Electrification) for details refer Sch A in pdf folder 12 SCHEDULE A PART III-B (Internal Electrification) 13 M & L forpoint wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade, IS-694 single core multi-stranded (FRLS-H) copper conductor cable in proper colour coding drawn into and including metallic rigid conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed modular steel terminal box for mounting fittings i.e, modularswitch / socketsincl cover plate with frameincluding one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly inclcutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: - 14 Note: (i) Also includes inverter wiringwith one run of inverter wire 1.5 sqmm all alongwith circuit also included. (ii) All items used should be ISI marked. (iii) Cutting chases for concealed type point wiring including making good the same with plaster/putty is deemed to be included in quoted rate by the contractor. (iv) Accessories modular metal boxes, cover plate inner & outer is also deemed to be included in quoted rate. 15 (a) One light point point /bell buzzer/ ceiling fan/Exhaust fan point controlled by one-one way switch. ( 9 points for Lift Schedule) 16 (b) One three pin 5 Amp socket on same board with other switches. 17 (c) One three pin 5 Amp socket on independent board 18 (d) All as per item No 5.01 above but for two way wiring 19 (e) All as per item No 5.01 above but point wiring with cable 2.50 Sq mm size, with earth continuity conductor of size 2.50 Sq mm.( 9 points for Lift Schedule) 20 Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable incl connection with ceiling roseall as specified & directed. 21 Supply and fixing LED batten light fitting20W, 220V,with microwave motion sensor based technology with aluminium housing & integrated electronic driver of make Havells with Cat part no LUMILINESMART20WLED865PCWH or equivalent make of Bajaj/Philips/Crompton complete all as specified & directed. 22 Supply and fix LED Bulb 9 Watt complete all as specified and directed. 23 S & F MCCB 4 pole 200 A,415 V, 25 KA, 4 Pole with Icu=100% Ics complete all as specified and directed. 24 S& F socket outlet for TV/Video/audio device modular type with inner and outer modular plate type, specially built for wall/high mounted TVand incl pressed steel/metal flush box concealed complete 25 S& F socket outlet for Telephone (RJ11) modular type with inner and outer modular plate type for communication (telephone)incl pressed steel/metal flush box concealed complete 26 S & F Recess/surface mounting motion sensor based LED luminaire 600mm x 600 mm ,36 W, 220V, with inbuilt PIR sensor and can detect motion from upto 5 mtr height,high efficiency PMMA diffuser soft glare free light suitable for recessed/ surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 27 S&Fsheet metal enclosure for VTPN MCCB DBs(double door type) ,12 way (F1+36 module ) with IP 54 protection , isolated neutral bar, mechanical impact strength IK 09, suitable for MCCB upto 200 A, with cement spill protector including blanking plate as required with rated bus bar, 415 volts fixed complete all as specified and directed. 28 M&L for earthing with copper earth plate electrode of size 60x60x3.15 mm thick buried directly in ground to a depth not less than 3.25 Mtr deep below normal ground level with top edge of the earth plate not less than 2.50 Mtr deep below normal ground level connected to copper strip of size 20x3 mm as earthing lead by means of nuts, bolts and washers of copper / brass after welding/brazing of copper strip to earth electrode to the full length of earth plate, 25 mm dia GI tubing light grade protection pipe up to test point, 20 mm dia GI watering pipe medium grade with funnel and wire mesh , PCC pit 1:3:6 with pit cover of size 30x30 cm made of RCC 1:3:6 with suitable handle, angle iron frame made of angle ironof size 40x40x4 mm, adequate qty of charcoal dust and salt layers all around the earth plate ,removal of surplus soil and returning and filling in all as required at site including test point made out of steel plate of size 75x75x6 mm fixed to wall as specified in plate No. 3 of SSR Part-I and directed by Engineer-In-charge. ( 06 for lift schedule) 29 pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm),funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs,including copper earth strip 20 x 3 mmwith GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified. 30 S&FRCCB Four pole, 240 volts, 63 Amp repturing capacity 10 KA, sensivity 100 mA with backup fuse typecomplete all as specified and directed. 31 SCHEDULE A PART IV (Site Clearance and Earthwork) for details refer pdf folder 32 SCHEDULE A PART V A (Road, Path and Hardatanding) for details refer pdf folder 33 SCHEDULE A PART V B (Road, Path and Hardatanding) 34 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method over and including 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified complete all as specified and directed. 35 SCHEDULE A PART VI A (Sewage Disposal) for details refer pdf folder 36 SCHEDULE A PART VI B (Sewage Disposal) 37 RCC Septic tank conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-25 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 Users, complete all as specified and as shown on drawings CEBZ/TD/129, sheet 3/3 dt 14 Dec 2024. 38 M & L for Soakage wells comprising of excavation, in any type of soil, foundation in PCC 1:3:6 type C2 , walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 M dia X 4.50 M effective depthall as specified and shown in drawing TD-309, sheet No 1/4 to 4/4 39 SCHEDULE A PART VII (Area Drainage) for details refer pdf folder 40 SCHEDULE A PART VIII (Protective Work / Retaining Wall) for details refer pdf folder 41 SCHEDULE A PART IX A(Hot Water Supply) for details refer pdf folder 42 SCHEDULE A PART X A (External Water Supply) for details refer pdf folder 43 SCHEDULE A PART X B (External Water Supply) 44 M&L for brick masonery chamber (Valve Pit) for opening and closing valve of internal diamensions (600mmx600mmx600mm) build in CM 1:6 including fixing MS sheet cover 5mm thick over angle iron frame of size 40x40x4 mm with laying and locking arrangement and 15 mm thick cement plaster in CM 1:4 internally with two coat of synthetic enamel paint over one coat of red oxide primer including necessary excavation and earthwork in any type of soil complete all as specified and directed 45 Cutting existing steeltubing of size 50 mm/ 80 mm for alternation or addition(each cut measured) 46 SCHEDULE A PART XI A (EXTERNAL ELECTRIC SUPPLY)for details refer pdf folder 47 SCHEDULE A PART XI B (EXTERNAL ELECTRIC SUPPLY) 48 Supply, fixing, connecting and comissioning of out door type LT Cubical panel feeder pillar box powder coated with structural siemens gry RAZ 7032shall be factory fabricated as per IS-8623 rated for short circuit rating of 35 KA, front and rear operated twin leaf doors and lockable by keys for both sides having louvers and air vent, gasket and totally vermin proof made out of 3.15 mm thick CRCA sheet with IP 65 class protection and conforming to and tested for IEC 61439 standards duly compartmentalized for incoming and outgoing shall have extension links of capcity 1.5 times the rating of individual fedder i e not less than 300 mm long, all link shall be insulated with colour coded heat shrinkable sleeve and suported on DMC/Epoxy insulateors having 49 provision for termination of incomer and out going cables. All control wires shall be not less than 2.5 Sqmm multi strand copper conductor and properly bunches/tide, ferruled for proper identification and crimpedwith adequate size of lug. The panel will have a bottom support of channel of suitable size, duly coated with zinc metal coating . A detachble pre-drilled glandplate of thickness 3.15 mm thick shall be provided with at the bottom for entry of cable with gland. Manufacturers name plate with feederdetailsand danger plate. 50 (a) Copper busbar duly insulated with colour coded heat shrinkable sleeve and mounted on DMC/Epoxy insulators of capacity 600 amps for three phase and 450 Amp for neutral-01 set and phase indicating lamps and Ampere meter,Voltmeter, complete with CT and selector switches for three phase current and voltage display.(b) MCCB FP 415 voltsof capacity 400 amps adustable type with ruptuing capacity 36 KA (incoming) -01(c) Change over switch 400 Amp-01(d)MCCB FP 415 voltsof capacity 315 Amps adustable type with ruptuing capacity 36 KA- 01 Nos (Outgoing)(e) -do- but 200 Amps -02 Nos with rupturing capacity 36 KA (outgoing)(f) MCB SPN 63-100 Amp = 02 nos with rupturing capacity 25 KA (outgoing) 51 Supply, installation, testing & commissioning of diesel engine silent generator set with acoustic enclosure confirming to latest CPCB norms, water cooled capacity 250 KVA ( generator out put should be250 KVA/200 KW) 50 Hz AC supply, engine as per IS : 10001/ 10002 and alternator as IS : 13364 complete including engine alternator mounted on common base frame and canopy fabricated from steel channel of suitable size, engine and alternator shall be anti vibration mounting pads,sound proof and weather proof canopy as per latest CPCB norms and foundation as per manufactures instruction / design complete all as specified directed with and including the following provision :- 52 (a) ALTERNATOR :- Alternator of capacity 250 KVA/ 200 KW at 0.80 power factor after considering derating factor AC 3 phase , 415 volts, 50 Hz, 1500 RPM brushless type self excited, self regulated screen protected type and AVR system. 53 (b) DIESEL ENGINE:- Diesel engine water cooled suitable for alternator of250 KVA capacity considering all points for derating factor taking into account the altitude, humidity of maximum temperature of Ranikhet with the following provision :-(i) Radiatorand sound proof canopy as per latest CPCB norms and foundation etc. of capacity 250KVA(ii) Fly wheel(iii) Air cleaner (iv) water pump with thermostat(v) Electric starting system with the help of batteries as per manufactures specification with key ignition and push button (vi) Temperature meter and oil pressure gauge 54 (vii) Fuel tank ofmade of mild steel sheet of required capacity as per standard with inlet and out let connection, filling cap, drain valve air vent with calibrated scale on outdoor surface floor mounted with suitable angle iron support(viii) Fuel/ oil filter (ix) Battery charger as per manufacturers recommendation(x) Battery maintenance free with connecting lead. Make Exide / Amaron /Luminous(xi) Foundation as permanufacturersinstruction / drawing(xii) Heating system to start engine during winter season 55 (xiii) Engine protection device against short circuit overload low lubricanting oil high pressure water temperature and over speeding of engine (xiv) Anti vibration mounting pad - set of 6 Nos(xv) Exhaust system up to required height and length (xvi) Engine warranty and test certificate(xvii) RPM meter and hour meter(xviii) Including Gen set control unit complete 56 M&L for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directlyin ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and includingGI Strip of size 32x6mm and light grade protection pipeof 40 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45X 45X 45 CM, RCC cover (1:2:4) type B1 of size 45X45X6CM, 57 excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valuecompleteall as specified and directed.(GI strip upto 7.5m including testing consider in this item).( 06 for this schedule, 06 for Fire Fightingschedule, 02 for Fire Detectionschedule & 06 for Lightening Protection Schedule ) 58 SCHEDULE A PART XII A (LIGHTENING PROTECTION)for details refer pdf folder 59 SCHEDULE A PART XII B (LIGHTENING PROTECTION) 60 Supply & Fix test point terminal block of gun metal or phosporus bronze of size (75 x 75 x 25) mm , drilled and screwed including 3 Nos, 8 mm dia 25 mm long hexagonal head screw complete all as specified and directed. 61 SCHEDULE A PART XIII [AIR CONDITIONING] 62 Supply, Design, Installation, testing and commissioning of Variable Refrigerant Flow VRF/VRV Central AC Plant at Ranikhet area for design conditions required as per Annexure A and Rooms to be air conditioned marked as per Drg. ICU, Major OT 1 and 2 and Minor OT shall have separate AHUs to be installed . Balance room may be clubbed in one AHU. Tentative design by the Deptt is enclosed as Appendix B. Contractor should work out complete design details of the AC plant, AHU ducting, reheat for monsoon and heating load for winter and quote accordingly. Electric supply cable upto main electric panel to be installed under this work shall be measured and paid separately.All contral cable and power cable including earthing of various equipments being installed in this work from the electric panel till all the equipment deemed to be included in the cost.The plant shall comprise the followings:- 63 (a) Supplying,installing,testingandcommissioningofaircooled variable refrigerant volume / Flow modular typeairconditioning system with R410a refrigerant. The PCB Chamber of outdoor unit should be refrigerant cooled suitable for 3 Phase, 50 cycles. The unit shall consist of Modular type outdoor units equippedwith highlyefficient inverter type hermitically sealed scroll compressors (outdoor unit shall be with 2 x 100% (1 W+1 S) arrangement), with special precoated heat exchanger, low noise condenser fan housed in compact housing duly powder coated. The unitshallbeabletooperateuptoto40°Cin coolingmode.The unit shall also have feature to automatically modulate the evaporative temperature to achieve inside design condition as mention . Outdoor Units shall be fully Gas Charged . The units should have three phase technology for continuous operation. Outdoor unit having COP at 100% load to be minimum 3.1 (a) Outdoor units comprising of Energy efficient Inverter scroll compressor , Heat Pump Type suitable for (Heating+Cooling). Air Cooled Condenser shall be with VariableSpeed Condenser fan motor . 64 (b) Double skin sandwich type air handling units (AHU).(FM/CS HORIZONTAL TYPE) of capacity and numbers as mentioned in tentative design or of higher size as per detailed heat load calculations (2 DX coil in AHU with AHU kit for 100% standby independent operation) , comprising of 25mm thick housing with thermal break profile constructed with of 0.6 mm thick galvanized powder coated sheet on outside and 0.6 mm thick plain GI sheet inside with PUF of 43kg/m3 density insulation in between both sheets to make 25 mm thick finished panels including AHU have DIDW forward / backward curved type centrifugal fan for static pressure complete with suitable size induction motor 415volts, 3 phase 50 Hz AC supply capable to provide Air as per design, Belt driven system and with vibration pads, insulated jointless stainless steel condensate drain pan, including DX cooling coils made up of minimum 6 rows deep with electronic expansion valve with AHU kit assembly including aluminium damper and Prefilter complete all as specified and directed. Strip type reheater for humidity control during monsoon with control and contactor for automatic switching based on humidistat shall be provided in each AHU as per tentative design or as per detailed heat load calculations. Spray type Humidification kit for increasing humidity in winter shall be provided in each AHU with 500 liter tank, pump, piping controls and spray section. 65 (c) Refrigerant Pipe work for VRF System of one end expand refrigerant copper piping with Y-joint and headers insulated with closed cell elastomeric nitrile rubber tubular insulation between indoor & outdoor units as per specifications, all piping inside the room shall be properly supported/fixed with suitable size of clamp and PVC sleeves shall be provided wherever pipe is crossing the wall including ultra high pure Nitrogen is to be used while making breezing joints complete all as specified and directed. Dia meter and quantity for pipe shall provide by the contractor as per the approved design with out any extra cost. 66 (d) GI cable tray of required size, laying horizontal and vertical with bends, reducer, tees, cross member and other accessories as required and duly suspended from the ceiling with MS threaded suspenders or fix with wallincluding covered the exposed area near outdoor unit with 24G thick GSS sheet metal perfect for laying the cables, drain pipe and copper piping etc complete all as specified and directed. Quantity for cable tray shall provide by the contractor as per the approved design with out any extra cost. 67 (e) Aluminium sheet metal ducting of suitable sizes complete with hangers, Spliter Damper, vanes and all other accessories etc as required with sealing gasket for supply air duct with 25 mm thick open Cell Elastomeric Nitrile Rubber Foam (Class - O)aluminum foil of mat finish included acoustic lining from duly insulated AHU to OTs including providing flexible canvas cloth connection complete with opening of wall for supply & return air grill all as specified and directed. Size of duct and quantity shall provide by the contractor as per the approved design with out any extra cost.NOTE :-Cutting chases/hole in wall for inserting duct shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost. 68 (f) Return air ducts with Closed Cell Elastomeric Nitrile Rubber Foam (Class - O), duly laminated aluminum foil of mat finish included acoustic lining of duct with 15 mm thick open cell elastomeric material of high density duly fixed with suitable Pidilite adhesive, and also tighten with suitable size of nuts,bolts and washer conforming to standard specification complete all as specified and directed. Size of duct and quantity shall provide by the contractor as per the approved design with out any extra cost. 69 (g) Low velocity and vibration, Supply and Return air duct (of aluminium) with supply air grill suitable for laminator flow pattern perforated plenum (matched with modular OTs) made of 16G SS 304 sheet suitable for operation theatre with all accessories including 0.3 micron hepa filter section of suitable size complete with SS 304 material sheet metal frame housing suitable to installed the HEPA filters and Low leakage aluminium sheet duct dampers for operation of manual control of Air flow through Ducts with suitable flanged ends, gasket and nut bolts including hanging arrangement for complete frame / plenum with ceiling using suitable size of MS structure, angle iron ect up to suitable height includingaluminium extruded fresh air intake / exhaust air louvers with bird screen including 5 micron filters complete all as specified and directed. Quantity shall capable to provide by the contractor as per the approved design with out any extra cost. dust filtration in All balance air-conditioning space shall also be provided with hepa filter of .3Micron with 99.97% duct filtration level. 70 (h) Refrigerant Gas R-410aafter proper checking of leakage with soap solution and charging of nitrogen gas for 36 Hrs to hold the same pressure and after proper vaccumising refrigerant gas to be charge in system as required complete all as specified and directed. 71 (i) Rigid PVC piping 25mm/32mm suitable for 10Kg/cm pressure of following size complete with fittings, proper U-Trap and supports and duly insulated with 6 mm thick closed cell nitrile rubber insulation, clamps for drain system complete all as specified and directed. The Quantity shall provide by the contractor as per the approved design with out any extra cost. 72 (j)1100 volts grade heavy duty PVC insulated, PVC sheathed multistranded copper conductor cable, suitable size and core including connecting on LT panel / out door unit VRF with suitable lugs, glands complete all as specified and directed. The Quantity shall provide by the contractor as per the approved design with out any extra cost. 73 (k) Fabrication, supply, installation, testing and commissioning electrical cubical control panel board( KIOSK TYPE ) Double door, CPRI approved an ISO 9001 factory assembled made out door pedestal type feeder pillar box whether and vermin proof fabricated of 3.0mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium strips for incoming/outgoing MCCBs including and Mounting measuring instrument such as Volt meter, Ammeter, Selector switchs, CTs -03 Set, Phase indicator lamps with holder , toggle switches and MCBs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 60 cm above ground level by providing 105 cm long angle iron size 50x50x6mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded upto 45cm complete all as specified and directed. ( Feeder piller box shall be consisting the following), Qty-01 No 74 (a)4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1 ½ times of the incoming capacity with provision of extension and mounting on porcelain support(b)MCCBFP 250 amp 35/36KA, 415 volts, 50Hz (Adjustable type) = 01 No (Incoming)(c)MCCBTPN of suitable capacity , 415 volts, 50Hz (Thermal magnetic release and overload 80-100%) - 02 Nos (Outgoings for VRF out door unit)) (d) MCCBTPN of suitable capacity , 415 volts, 50Hz for each AHUs)(e) MCBSP of suitable capacity, 230 volts, 50Hzfor each AHUs unit if required. (f)Digital Panel mounted Amp meter 96 mm square type complete with selector switch complete with suitable size of CTs - 01 Set(g) Digital Panel mounted Volt meter 96 mm square type complete with selector switch - 01 Nos (h) Insulated Aluminium bus bars of suitable size shall be provided from the main bus bar to the out going MCCBs.(i)RYB indicating lamp, LED type - 01 sets.(j)Cost of PCC for foundation is deemed to be included in quoted rate by the contractor.(k) Drawing shall be approved by GE before placing the order. 75 (l) Underdeck insulation with 50 mm thick nitrile o class rubber shall be provided in all AC rooms on first floor. 76 (m) Earthing complete with copper earth plate electrode 60×60cm.× 3.15 mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to 20x3 mm copper stripby means of bolts, nuts, checknuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion but using copper plate 60×60cm ×3.15mm ( Each Job-02 Nos) 77 Note :-The Copper strip more than 7.5 mtr using for the equipment/Lt Panel shall deemed to be included in the quoted rate. 78 Note :- (a) The Contractor shall get complete design of AC Plant including platform duly vetted from IIT/NIT without any extra cost and to beapproved by the accepting officer before execution of work.(b) Suitable heating and humidification arrangement shall be provided by the Contractor for precise control of temperature and humidity in OT, without any extra cost.(c) Digital display of temperature and humidity in each air conditioning system will be provided by the contractor without any extra cost 79 SCHEDULE A PART XIV( MEDICAL GAS SYSTEM) 80 Supply and fixing Oxygen Manifold 8 + 8size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes. (CE Marked) ( Indigenous) 81 Supply and fixing fullyAutomaticGas Control Panel for Oxygen with inlet .(CE Marked) ( Indigenous) 82 Supply and fixing 1+1 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .(CE Marked) ( Indigenous) 83 Supply and fixing Surface Type Front LoadingGas Outlets with probes/Adaptors for Oxygen. (CE Marked) ( Indigenous) 84 Supply and fixing Oxygen Flowmeter with Humidifier Bottle .(CE Marked) ( Indigenous) 85 Supply and fixing H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .Indigenous 86 Supply and fixing Vacuum system V X 235 Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity Indigenous 87 Supply and fixing Surface Type Front LoadingGas Outletsfor Vacuum with probes/Adaptors(CE Marked) (Indigenous) 88 Supply and fixing Ward Vacuum Unit with Regulator, Collection Jar of 600 ml with bracket .(CE Marked) ( Indigenous) 89 Supply and fixing CombinedElectrical Control Panel forVaccum System(Indigenous) 90 Supply and fixing Nitrous Oxide 2 + 2size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .Indigenous 91 Supply and fixing 1+1 Cylinders Emergency nitrogen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes.(CE Marked) (Indigenous) 92 Supply and fixingfullyAutomatic analog Gas Control Panel for Nitrous Oxide with inlet .Indigenous 93 Supply and fixing Surface Type Front LoadingGas Outletsfor Nitrous Oxide with probes/Adaptors Indigenous 94 Supply and fixing Copper Pipes used will be solid drawn, 28mm OD X 1 mm thk seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP. 95 Ditto as per itme 21.15 but 22 mm OD X 1 mm thick 96 Ditto as per itme 21.15 but 15mm OD X 1 mm thick 97 Supply and fixing Valves Boxes with Pressure Gauges as per Technical Specifications.3 Gas Services ( O2, Vac, Air 4) (CE Marked) (Indigenous) 98 Supply and fixing Area Alarmas per Technical Specifications enclosed3 Gas Services ( O2, Vac, Air 4) (CE Marked) (Indigenous) 99 Supply and fixing 28 mm OD Isolation Valve duly enclosed in glass / transparent box with lockable arrangement as per Technical Specifications enclosed(CE Marked) (Indigenous) 100 Ditto as per item No. 21.20 but 22mm OD 101 Ditto as per item No. 21.20 but 15 mm OD 102 Supply and fixing Horizontal Bed Head Panel (Al Extruded) 5 ft. Long Provision for Gas Outlet, Electrical Switch & Socket,Nurse Call, etc(CE Marked) (Indigenous) 103 SCHEDULE A PART XV A (FIRE FIGHTING)for details refer pdf folder 104 SCHEDULE A PART XV B (FIRE FIGHTING) 105 Supply, installation, testing and commissioningfire pump electrically driven horizontal end Suction, centrifugal type confirming to IS- 12469 :1988 with CI Casing , bronze impeller and Stainless steel shaft mounted on heavy duty bearings Suitable for continuous operation with range of operation 0 % to 150 % of rated capacity for 440 V , 3 Phase. 50 Hz 30m Head, 2900 RPM, 1620 LPM discharge of capacitynot less than 20 HP mounted on common base plate / MS channel and PCC foundation of suitable size as per manufacturer recommondation and 400mm all around including jointing with delevery & suction with required Jointing material all as speedfied and directed.Note: All the PCC foundation work incl base plate and MS channel work shall deemed to be included in the quoted rates. 106 Supply, installation, testing and commissioningfire pump Diesel driven horizontal end Suction, centrifugal type confirming to IS- 12469 :1988 with CI Casing , bronze impeller and Stainless steel shaft mounted on heavy duty bearings Suitable for continuous operation with range of operation 0 % to 150 % of rated capacity for 440 V , 3 Phase. 50 Hz 30m Head,1800 RPM, 1620 LPM discharge of capacitynot less than 20 HP mounted on common base plate / MS channel and PCC foundation of suitable size as per manufacturer recommondation and 400mm all around including jointing with delevery & suction with required Jointing material including the fuel tank mounted either over or adjacent to engine with capacity sufficient ot make the engine to run on full load for at least 8 Hrs all as speedfied and directed.Note: All the PCC foundation work incl base plate and MS channel work shall deemed to be included in the quoted rates. 107 Supply and Install Electric Driven Jockey pump horizontal end suction centrifugal type Confirming to IS- 12469:1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 70 m head 180 LPM discharge of capacitynot less than 10 HP all as specified and directed.Note: All the PCC foundation work incl base plate and MS channel work shall deemed to be included in the quoted rates. 108 Supply and fixingofhose box (cabinet) of size 900x900x600mm indoor type made out of 2mm thick MS Sheet with ceter opening glazed doors (4mm thick clear glass) and locking arrangement including painted with to coats of synthetic enamlled paint over a coat of red oxide primer and the word FIRE to painted on box, suitable for housing 2 Nos hose pipe of length 15 mtrs each with branch pipe,nozzle,coupling etc all as specified and directed. 109 S&F Cast iron dual plate check valve 100mm bore, flanged type, PN-1.6, inserted to pressure 15 Kg/Sqmtr complete setall as specified and directed 110 Supply and fix portable fire extinguisher 6Kg Dry chemical powder (ABC) type confirming to IS 15683 all as specified and directed. 111 Supply and fix PVC tank rotational moulded water storage tank of capacity 5000 ltrs including float valve(cylindrical vertiacal with closed top) hoisted and fixed in position all as specified in SSR part-I. 112 Design, supply, installation, testing and commissionioning of LT Panel for fire fighting system complete with weather protected top canopy front and rear operated twin leaf doors and conforming to and tested for IEC 61439 standards and cable allay ,with locking arrangement made out of 3 mm thicksheet steel duly treated with powder coated finish, copper bus bars in enclosed chamber complete with MC100 pedastal for grounting, PCC pedastal,rubber linings for doors with including foundation complete with the following :- 113 (i) Copper bus bars of capacity 400 Amps for three phases and one neutral.(ii) MCCB 4 P350 A with adjustable thermal & magnetic release release range.Braking capacity 36 KA (for incoming) - 1 No. (iii) Ammeter digital (0-400 Amps Range) -01 Nos, Voltmeter digital(0-500 V Range) -01Nos, with control fuses ,CTs, selector switches and Phase indicatorsOutgoing (iv)MCCB 4 Pole 250 A, with adjustable thermal & magnetic release release range.Braking capacity36 KA - 01 Nos Inbuilt starter ,ML 4 type contactor for Star Delta starting for 20 HP (15 KW) - 02 set,with start and stop push button ,Digital Ammeter with CTs, selector switches, phase indicator lights, relays,phase preventer, Auxillary contacts for interlocking/ sequence of operation, control terminals, complete in all respect with interconnections for hydrant pump and sprinkler pump. 114 (v)MCCB 4 Pole 63 A, with adjustable thermal & magnetic release release range.Braking capacity25KA - 02 NosInbuilt starter ,ML 1.5 type contactor for DOL starting for 10 HP (7.5 KW) - 01 set,with overload relay , start and stop push button, digital Ammeter with CTs, selector switches, phase indicator lights, Auxillary contacts for interlocking/ sequence of operation, control terminals, complete in all respect with interconnections for jockey pump & booster pump (vi) Control wiring from pressure switches of different settings in Hydrant and Jockey pump , for sequence of operationshall deemed to be included to complete the system(vii)Automatic on load Changeover 200 Amp - 01 setNote:The panel shall be designed to facilitate the automatic operation of all the three pumps ( main pumps and jockey pump) with necessary interconnection and control wiring. The design must follow all the fire safety standards as per NBC India and any additional item/accessories required in the LT panel for smooth operation and control of the Fire fighting system, shall be incorporated by the contractor without any extra cost to the department.Nothing extra shall be paid to the contractor on this account 115 M & L for connecting and testing of CI air release valve 20 mm size with ISI marked flanged type incl jointing material such as fiber board, nut bolt, washers, and welding etc complete all as specified and directed. 116 Supply a glow in dark FIRE EXIT sign board with man running arrow symbol and stair of dimension 12 X 6 X 8 mm decorative transparent acralic, including fixing arrangment all as specified and directed. 117 S & F flexible connector flanged class 150, PN1.6 of size 100 mm complete with stainless steel nuts,bolts, washers & fibre/rubber gasket steel spindle completeall as specified and directed. 118 M&L for cutting of existing pipe line of 150 to 80 mm dia for taking branch connection alongwith insertion of GI Tee of suitable size and connection matarial 119 Supply and fix Fire Extingusher CO2 type, 4.5 Kg cap, conforming to IS 15683 (Light Wt Squeeze grip type) complete all as specified and directed. 120 Supply and fix Fire portable water mist Extingusher, 9 ltr cap, conforming to IS EN: 3-7: 2004 (Light Wt Squeeze grip type) complete all as specified and directed. 121 Supply and fix 63 mm dia 30 mtr long RLL hose pipe type -A confirming to IS complete with male and female coupling confirming to IS 903 complete all as specified and directed. 122 SCHEDULE A PART XVI A (FIRE DETECTION)for details refer pdf folder 123 SCHEDULE A PART XVI B (FIRE DETECTION) 124 Supply and drawing of PVC insulated FR-LSH as per PS conductor copper wire into the existing conduit conforming to ISI664 and duly ISI marked copper cables two core of 1.5 Sqmm size,1100 Volts 125 Supply,laying and testing PVC insulated, PVC sheathed cable galvanised steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4 Sqmm 3 Core 1100 Volts all as specified and directed. 126 SCHEDULE A PART XVII ( SHADOW LESS LIGHT) 127 Supply, installation, commissioning and testing of LED based ceiling suspended double dome Operation TheaterLight with provision only for Camera to be fitted inside the dome as and when required at later stage in compliance with medical device electric standard IEC-60601-2-41, with each dome consisting of minimum 30 LEDs and maximum 120 LEDs housed in dome with diameter ranging between 500 mm, suspended through a ceiling assembly with spring arm system to provide precise positioning of the OT light as required during surgery complete withwith all necessary wiring from and hanging arrangements as per manufacturers guidelines with following specifications :- 128 TECHNICAL SPECIFICATIONMAIN DOME SATELLITE DOMEIntensity @ 1 Meter (Lux) 1,60,000 + 10% 1,60,000 +10%Adjustable Field diameter (cm)14-38 14-38Depth of illumination L1+L2 (cm)> 100> 100 Color Rendering Index (CRI) (Ra) 95 + 3%95 + 3% Color temperature (K) 4,500 + 10 %4,500 + 10 % Intensity control (%) 25-100 25-100Type of field focusing control By sterllizable handle By sterllizable handleType of Intensity control By control panel on lamp headBy control panel on lamp head 129 ELECTRICAL & MECHANICAL SPECIFICATIONSPower Supply input voltage (V)220-230 VPower Consumption (W)< 150 Frequency (Htz)50/60 Dome Diameter600-700 mmLED service life (hrs) > 40,000 Make :- Philips/Dr Mach/Hospedia medicare/ Stryker. Note :- The contractor shall submit the details of Make/Model/Specification of the OT light for approval of GE before placing order. The Make and Model of OT light shall fulfill the requirement given here-in-before. In case of any discrepancy/ difference of opinion, the decision of Accepting officer shall be final and binding and nothing extra shall be paid on this account. Note: UPS to be paid under separate item under ser No:02.The Cost of the same is considerd in Ser item No: 26.04 130 Supply,fixing, testing & commissioning of UPS of capacity 1 KVA with full load backup of 30 min and 60 min backup at 50% load, single phase AC input 160 to 260V and out put 230 V ± 1%with inbuilt isolation transformer, batteries complete all as specified and directed. 131 Supply ,installation ,commissioning and testing of portable single dome operation Theater light with in compliance with medical device electric standard IEC-60601-2-41,with each dome consisting of minimum 30 LEDs and maximum 50 LEDs housed in dome with diameter ranging between 500-700 mm with spring arm system to provide precise positioning of the OT light as required during surgery complete with sealed maintenance free batteries to provide instantaneous backup in case of power failure for 60 minutes complete with all necessary wiring for hanging arrangement as per manufacturers guidelines with following specification :- 132 TECHNICAL SPECIFICATIONDOME Intensity @ 1 Meter (Lux)1,60,000 + 10% Adjustable Field diameter(cm)14-38Depth of illlumination L1+L2(cm)>100 Rendering Index (CRI)(Ra)95+3 %Colour temprature(K) 4500+10%Intensity control(%) 25-100Type of Field Focusing controlBy Sterilizable handleType of Intensity controlBy Control panel on lamp headELECTRICAL AND MECHANICAL SPECIFICATIONS Power Supply input Voltage (V)220-230VFrequency (Htz) 50/60Dome Diameter 500-700 mm LED service life (hrs) >40000 133 SCHEDULE A PART XVIII A (PUBLIC ADDRESS SYSTEM)for details refer pdf folder 134 SCHEDULE A PART XVIII A (PUBLIC ADDRESS SYSTEM) 135 Supply and fix Control Console for public address system for amplifier, microphone and speaker control incl all connecting accessories all as specified and directed. 136 SCHEDULE A PART XIX A (LIFT)for details refer pdf folder 137 SCHEDULE A PART XIX A (LIFT) 138 Supply, install, testing & commissioning traction passenger elevator (lift) ,Electrically operated with microprocessor based full simpelx colletive control 8 Passenger, 544 Kgs lift suitable to serve G+1 upper floors with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories, simplex automatic and manual dual Closed loop controlled operation with/without attendant, telescopicopening doors with door drive (electric motor driven mechanism), sliding stainless steel doors grade 304, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set & human interface device(HID).all as specified below and all as per IS-14665 & IS-15785 :-Note: (i) Contractor to submit detailed construction drawings of lifts being provided with complete technical specifications as per IS: 14665 before dispatch of material from OEM for approval of GE.(ii) The scope of work also covered the civil work comprising cutting of holes and making good. car and counter weight guide rails and bracket, terminal buffers supports and sill angle, plates and any other items required for successfull completion of lift with respect to safety required by the OEM, will be carried out by contactor without any extra cost. 139 (iii) The contractor shall be responsible for 2 years defect laibility period from certified date of completion of GE. During the said defect liability period the lift,shall be kept functional/serviceable all the time & all consumable items shall be provided by contractor for operation & maintenance of lift. All periodical maintenance regular check up/inspection shall be carried out by OEM during 02 years defect liability period.In addition to regular checkups and periodical services special visit/inspection will also be carried out to rectify defects by representative of OEM if any emergency / trouble developed.An agreement will be made between contractor & OEM ,and this shall be submitted to GE on the date of handing over of lift for the comprenssive maintenance of defect liability period. The cost of above shall be deemed to be included in the quoted rates. (iv) The provision of suitable steel structure/ palteform for installation of lift equipment is part of lift item and nothing extra shall be paid.(v)If any clearance required from state goverment i.e. lift inspector/ electrical safety department/ fire safety departments is the contactors responsibility & any expenditure on this account shall deemed to be included in the quoted rates. 140 BASIC DATA / TECHNICAL SPECIFICATION(a) Type of Lifts: Passenger machine room less type(b)Load & capacity : 544 Kgs/ 08 Persons(c)Speed: 1.00/ mtr/sec (d)Power Supply : 415 volts, 3 phase AC, 50 Hz(e) Machine:3 Phase Single speed Electric Motor lift duty reversiblewith gear etc (f) Stops and openings: 2 Stops and 2 openings, Single entrance Car.(g) Travel hight: 1 Floor of building.(h) Grouping/Operation : Simplex, Full collective.(j) MAP Floor position : Top most floor.(k) Car size : 1100 mm wide x 1300 mm deep x 2200 mm height or as per IS and suitable to install.(l) Door size: 800 mm wide x 2000 mm height or as per IS and manufacturer specification.(m) Door type : Two- panel Centre opening , telescopic stainless steel 304 grade with Airvent, automatic operated door. 141 (n)lift well size 1900x1900mm, pit depth-1600mm or over head 4200mm.(o) Indicators : Car position indicator car & landing direction and position, indicator with stainless steel fixtures at all floor with dot red led scrolling display.(p) Traction media : Round stranded steel wire rope confirming to IS-14665-2000 or as per manufacturer specification with gaurds.(q) Call register type micro push button for opening and closing of doors. 142 FINISHES(a) Car design : Stainless steel 340 hair line finish/mirror polished(b) Car panel finish: Mirror polished stst./hair line stainless steel(c) Hand rail: Round bend hand rail stainless steel at rear wall.(d) Ceiling and lighting : Integrated Roof RL20 Stainless Steel Ring Lighting LED.(e) Flooring : 20 mm Reecess and granite stone.(f) Car door finish: Stainless steel hairline finish AISI441 with fire raitng 60 min.(g) Landing door mark: Floor Number - G to 1, Floor mark G,1, Landing door material- Stainlesssteel grade 304hairline finish with fire rating 1 hrs.(h) Car opening panel:Full Height Stainless Steel Face Plate Silver brushed StSt,Segmented LED display Square surface mounted Buttons KDS90, Tempered glass segmented display (j) Landing signalization : Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted KDS90 143 STANDARD SAFETY FEATURES/DEVICES(a) Car emergency light, Fireman drive, Curtain of light, Accurate relevelling, Automatic closed door.(b) Emergency rescue device with audio announcer, nudging attendent service, ring lighting LED.(c) Digital direction and position indicator in car and at all landings.(d) Emergency alarm at the main landing with alarm bell button in car.(e) 2 Phase/2 way fire man drive, fire man switch at the main landing.( In case fire man drive is activated the lift will come to the main landing and open the door)(f) Advanced door operation ( To ensure smooth opening and closing of the doors at adjustable door speed)(g) Additional pressure sensing device.(h) Load weighing device ( Audio visual over load indicator in the car for better safety)(j) Full height infra-red curtain ( Highly sensitive safty device for safe entrance and exit of the passangers in to the car).(k) Pit ladder ( To ensure safety of the maintenance personnel). 144 (l) Emergency light, Intercom and alarm with maintenance free rechargable battery operation ( To ensure passenger comfort and safety in case of emergency)(m) Over speed governor ( Electro mechenical device that prevents free fall in case the elevator is travelling at speed more than 10 % of the rated speed in down ward direction)(n) Automatic rescue device ( To rescue the passengers in case of emergency, the device will bring the car to the nearest floor automatically and will open the doors).(o) Special car door lock, Automatic daily brake testing, Latest technology motor-PMS, Touch panel with LED display.(p) Mechanical rescue device with no dependence with battery.(q) Cross flow fan, 2 way built in communication system, anti nuisance car call protection.(r) Door time protection with extra door time for lobby and parking, auto fan cut off.(s) Mirror on rear side wall and voice synthesizer.(t) Controller shall be include protection against over current,over voltage, single phasing, phase reversal, earth leakage and interlocking with door opening, closing and moment of lift and any other operation required for the safety of passenger as per fire safety regulation pertainging to lift. (u) Emergancy stop button with alarm. (v) Two position key operated switch with attended and without attended switch mode.(w) Any other accessories / safety device required as per ISfor safety of passengers. 145 Supply, install, testing & commissioning traction passenger / stretcher elevator (lift) Electrically operated with microprocessor based full simpelx colletive control 20 Passenger, 1360 Kgs lift suitable for hospital stretcher to serve G+1 upper floors with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories, simplex automatic and manual dual Closed loop controlled operation with/without attendant, telescopic opening doors with door drive (electric motor driven mechanism), sliding stainless steel 304 frame with temepred laminated saftey clear vission glass door, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set & human interface device(HID).all as specified below and all as per IS-14665 & IS-15785 :-Note: (i) Contractor to submit detailed construction drawings of lifts being provided with complete technical specifications as per IS: 14665 before dispatch of material from OEM for approval of GE.(ii) The scope of work also covered the civil work comprising cutting of holes and making good. car and counter weight guide rails and bracket, terminal buffers supports and sill angle, plates appron/Toe/Tension pulley and any other items required for successfull completion of lift with respect to safety required by the OEM, will be carried out by contactor without any extra cost. 146 (iii) The contractor shall be responsible for 2 years defect laibility period from certified date of completion of GE. During the said defect liability period the lift,shall be kept functional/serviceable all the time & all consumable items shall be provided by contractor for operation & maintenance of lift. All periodical maintenance regular check up/inspection shall be carried out by OEM during 02 years defect liability period.In addition to regular checkups and periodical services special visit/inspection will also be carried out to rectify defects by representative of OEM if any emergency / trouble developed.An agreement will be made between contractor & OEM ,and this shall be submitted to GE on the date of handing over of lift for the comprenssive maintenance of defect liability period. The cost of above shall be deemed to be included in the quoted rates.(iv) The provision of suitable steel structure/ palteform for installation of lift equipment is part of lift item and nothing extra shall be paid.(v)If any clearance required from state goverment i.e. lift inspector/ electrical safety department/ fire safety departments is the contactors responsibility & any expenditure on this account shall deemed to be included in the quoted rates. 147 BASIC DATA / TECHNICAL SPECIFICATION(a) Type of Lifts : Passenger / stretcher machine room less type(b)Load & capacity: 1360 Kgs/ 20 Persons(c)Speed : 1.00/ mtr/sec (d)Power Supply: 415 volts, 3 phase AC, 50 Hz(e) Machine :3 Phase geared Single speed Electric Motor lift duty reversible type with gear sleeve and machine drive etc(f) Stops and openings : 2 Stops and 2 openings, Single entrance Car.(g) Travel hight : 1 Floor ofbuilding.(h) Grouping/Operetion : Simplex, Full collective.(j) MAP Floor position : Top most floor.(k) Car size : 1300 mm wide x 2400 mm deep x 2400 mm height or as per IS andsuitable to install.(l) Door size: 1200 mm wide x 2200 mm height or as per IS and manufacturerspecification.(m) Door type: Two- panel Centre opening , telescopic stainless steel grade 304 frame partially with laminated tempered (saftey clear vision glass size 400x900x16 mm thick(8+8mm), automatic operated door. 148 (n)lift well size 2570x2800mm, pit depth-1750mm or over head 4200mm.(o) Indicators : Car position indicator car & landing direction and position, indicator with stainless steel fixtures at all floor with dot red led scrolling display.(p) Traction media : Round stranded steel wire row confirming to IS-14665-2000 or as per manufecturer specification with gaurds.(q) Call register type micro push button for opening and closing of doors. (r) Control unit : Micro Processor based control unit. 149 FINISHES(a) Car design : Stainless steel 340 hair line finish/mirror polished(b) Car panel finish: Stainless steel Hairline AISI441(c) Hand rail : Round Bend Handrail Silver brushed stainless steel (ST4) at RearWall(d) Ceiling and lighting: Integrated Roof RL75 Painted Gentian blue Pyramid Lighting LED.(e) Flooring: 20 mm Reecess and granite stone.(f) Car door finish : Stainless steel hairline finish with fire raitng 60 min.(g) Landing door mark: Floor Number - G to 1, Floor mark G,1Landing door material-Stainless steel grade 304hairline finish with fire rating 1 hrs.(h) Car opening panel :Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons KDS90(j) Landing signalization:Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted KDS90 150 STANDARD SAFETY FEATURES/DEVICES(a) Car emergency light, Fireman drive, Curtain of light, Accurate relevelling, Automatic closed door.(b) Emergency rescue device with audio announcer, nudging attendent service, ring lighting LED.(c) Digital direction and position indicator in car and at all landings.(d) Emergency alarm at the main landing with alarm bell button in car.(e) 2 Phase/2 way fire man drive, fire man switch at the main landing.( In case fire man drive is activated the lift will come to the main landing and open the door)(f) Advanced door operation ( To ensure smooth opening and closing of the doors at adjustable door speed)(g) Additional pressure sensing device.(h) Load weighing device ( Audio visual over load indicator in the car for better safety)(j) Full height infra-red curtain ( Highly sensitive safty device for safe entrance and exit of the passangers in to the car).(k) Pit ladder ( To ensure safety of the maintenance personnel). 151 (l) Emergency light, Intercom and alarm with maintenance free rechargable battery operation ( To ensure passenger comfort and safety in case of emergency)(m) Over speed governor with brakes ( Electro mechenical device that prevents free fall in case the elevator is travelling at speed more than 10 % of the rated speed in down ward direction)(n) Automatic rescue device ( To rescue the passengers in case of emergency, the device will bring the car to the nearest floor automatically and will open the doors).(o) Special car door lock, Automatic daily brake testing, Latest technology motor-PMS, Touch panel with LED display.(p) Mechanical rescue device with no dependence with battery.(q) Cross flow fan, 2 way built in communication system, anti nuisance car call protection. (r) Door time protection with extra door time for lobby and parking, auto fan cut off.(s) Mirror on rear side wall and voice synthesizer.(t) Controller unit shall be include protection against over current,over voltage, single phasing, phase reversal, earth leakage and interlocking with door opening, closing and moment of lift and any other operation required for the safety of passenger as per fire safety regulation pertainging to lift. (u) Emergancy stop button with alarm.(v) Two position key operated switch with attended and without attended switch mode. (w) Any other accessories / safety device required as per ISfor safety of passengers. 152 Supply and fix, Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head light fitting, 10 w, IP66, 230V, 50 Hz, complete with all ccessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size,complete all as specified and as directed by Engr in Charge. 153 M & L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick as earth electrode with top edge of the earth plate not less than 2.25 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board/panel , watering pipe 20 mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated material all as directed at site and specified in EP No 3 of SSR part I, complete all as specified and as directed by Engr-in-Charge. 154 SCHEDULE A PART XX(UPS) 155 Supply,fixing, testing & commissioning of UPS of capacity 10 KVA with full load backup of 30 min and 60 min backup at 50% load, three phase AC input 300 to 450V and out put 415 V ± 1%with inbuilt isolation transformer incl batteries(12V-26/28 AH) with DC bus 192 VDC and battery capacity 4992 VAH incl battery rack, interlink connector ,cable for input and output connections and paralleling kit for synchronising complete all as specified and directed. 156 Supply only emergency rechargeable LED light 15 W with 7200 mAH battery with brightness control feature and in built mobile charging point. 157 SCHEDULE A PART XXI A (REFRIGERATOR AND ROPLANT)for details refer pdf folder 158 SCHEDULE A PART XXI B (REFRIGERATOR AND ROPLANT) 159 Supply and fix refrigerator, medical grade with external temperature display and fully electronic temperature control, control panel with audible & visual alarm in case of any temperature change with extractible drawers inside the cabinet which can be adjustable & removable incl partitions for rational storage of medicines, reversible glass door, integrated lock, BEE 5 star rated electric driven,capacity 375 Litres all as specified and directed 160 Supply and fix Reverse Osmosis Plant of out put capacity of 100 Litres per hour with 6 stage water purifier and automatic operation, suitable for wall mount or countertop having antibacterial,silver dose, taste enhancer and activatrd carbon filter for the post water treatment.The RO Plant should be energy efficient and durable with advanced RO technology and made out of high quality material that is resistant to corrosionand wear & tear incl PCC work for plinth and monkey caging all around as reqd at site. 161 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 0.5 KVA 162 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA 163 M & L for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm FR-LSH drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. 164 SCHEDULE A PART XXII (DEMOLITION)for details refer pdf folder 165 PHASE-II 166 Maint and operation of 2 x pessenger lifts at Ranikhet military station by providing manpower 01 x Skilled lift operator per shift in a day for 8 hrs including Sunday & holiday and carrying out minor regular / periodical repaires and regular servicing for upkeep thepassenger lift serviceable in all respect, checking of oil levels, thorough checking of lift, make the machinery /equipment dust free, including thorough cleaning up of battery terminals of ARD unit, greasing/oiling of moving parts, leak testing etc all as specified and directed by the Engineer-in-charge. (Note:- (i)The duration of work will be carried out in three shifts from 0600 hrs to 1400 hrs (First Shift), 1400 hrs to 2200 hrs (Second Shift) and 2200 hrs to 0600 hrs ( Third Shift). (ii)The duration of work will be carried out in three shifts of 08 hrs of each shift by deploying the manpower 01 x Skilled lift operator in each shift (Total 03 operators in one day) to operate the 02 Nos automatic lift ( 01 x 08 passengers & 01 x 20 Passenger) in one bldg G+1 storey. [24 months for DLP & 36 Months after DLP] 167 Comprehensive maintenance of all mechnical & electrical components & conduct a thorough inspection of the fully automatic 02 x passenger lifts ( 01 x 08 passengers & 01 x 13 Passenger) in one high rise tower of G+1 storey) with mechnical & electrical systems, including motor, cables, brakes, control panels & wiring. Identify any signs of wear, drainage or carring out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair / maintenance of unserviceable parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes, door cards, car door sills, landing door sills, door locks, control cards and its contacts, hall push buttons and its spares, connector / links, welding of crack/broken and MS parts,kanding operating panel of any size & capacity, repair / maint of u/s damaged door safety edge & sensor mechnical safety locks, megnatic lock of contact, car position indicator & all connected accessories, necessary wiring of hall push button assembly, repair/ mantenance of broken COP/LOP buttons & 168 display including cover, fire alarm, firemen button glass, intercom, alarm/hooters, maintenance of damged hand rail shaft, light / switches , complete with illuminated push button & direction indicator with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors & safe operation of lifts, fixing of loose rail brackets if any, cabin mirror light & minor repair of cabin fan, ensure safe & smooth functioning of lift & complete maintenance of car top, binding of loose wire at control panel & rust painting at car top and door, dewatering of lift well in case of any emergency arise all as directed by Engineer-in-charge. [ 36 Months after DLP] 169 Maintenance and Operation of water supply and firefighting installation round the clock, seven days a week incl Sundays/ Holidays (in three shift of 8 Hrs each) by deploying three skilled (FGM) in three shifts(one FGM each shift)to operate installed machinery all as specified and as directed by the Engineer-in-charge.(i) First Shift-0600Hrs to 1400Hrs.(ii) Second Shift- 1400 Hrs to 2200 Hrs.(iii) Third Shift – 2200 Hrs to 0600Hrs.[24 months for DLP & 36 Months after DLP] 170 Material and labour for Comprehensive and preventive maintenance of firefighting and water supply installations including replacement of all spare parts, from 3rd year after completion of defect liability period complete all as specified and directed. [ 36 Months after DLP] 171 Maintenance and Operation of AC Plant installations round the clock, seven days a week incl Sundays/ Holidays (in three shift of 8 Hrs each) by deploying three skilled (Refg Mech) in three shifts(one Refg Mecheach shift) to operate installed machinery all as specified and as directed by the Engineer-in-charge.(i) First Shift-0600Hrs to 1400Hrs.(ii) Second Shift- 1400 Hrs to 2200 Hrs.(iii) Third Shift – 2200 Hrs to 0600Hrs.[24 months for DLP & 36 Months after DLP] 172 Material and labour for Comprehensive and preventive maintenance of AC Plant installations including replacement of all spare parts with charging of GAS ,from 3rd yearafter completion of defect liability period complete all as specified and directed. [ 36 Months after DLP] 173 Note for Maint and operation and comprehensive maint :-(i) All necessary T&P including uniform shall be provided by the contractor to the operators at no extra cost. The rates for the same is deemed to be included in the unit rates quoted.(ii) The contractor will provide of all the necessary stationery such as log book, attendance register etc. to the operator for maintaining the plant running record. The rates for the same is deemed to be included in the unit rates quoted.(iii) suitable reliever to be provided during off shift operator.(iv) The contractor is advised to study the whole tender carefully before quoting the rates 174 Note : Tenderers may note that amount of credit Rs 72,185.28 will be deducted from the total amount arrived, at the time of Acceptance of contract.
