Tender For New Work Of Road Lighting From Delhi Rampur By-Pass Zero Point Tiraha To Kashipur Tiraha. - Supply And Errection Of 10.00 Meter Long Gi Octagonal Pole Of Approved Make (Top Dia 100Mmm Bottom Dia 20Mm And Base Plate 16Mm Thick) Having 3Mm Thickn, moradabad-Uttar Pradesh

Tender For New Work Of Road Lighting From Delhi Rampur By-Pass Zero Point Tiraha To Kashipur Tiraha. - Supply and errection of 10.00 meter long GI Octagonal pole of approved make (top dia 100mmm bottom dia 20mm and base plate 16mm thick) having 3mm thickness with double arm barcket 1mtr. length in 1:2:4 RCC foundation bolt including ther cost of foundation, excavation back filling etc. rates includes all materials, labour, T&P ketc required for proper completion of the work as per E/I SI 650/2018 2 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respect. E/I S.I 1425(2018)CAT-AAA (Phillips, halonix, jaguar) 3 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PWD SOR Item NO 501/ 2018)- 50 Sq.mm. x3-1/2 core 501(L)/2018 4 35 Sq.mm. x3-1/2 core 501(K)/2018 5 25 Sq.mm. x3-1/2 core 501(J)/2018 6 S/F of palm or pin type copper tinplanted cable socket (lug) to the cable leads etc. comp. (504/2018)50 Sq.mm. x3-1/2 core 501(g)/2018 7 35 Sq.mm. x3-1/2 core 501(f)/2018 8 25 Sq.mm. x3-1/2 core 501(e)/2018 9 S/E of Double walled corrugated HDPE pipe size 90/63 mm at a depth of 1.20 mtr. Below ground level complete excavation and back filling (Rate includes manual trunch less if required) complete work as per direction of E/I. 10 S/F og G.I. pipe 100mm dia B class for climbing up the cable from ground to overe head line (P.S.R.) 11 S & F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve S.I.no. 1002(CATA)/2018 12 Trenchless 63/90 mm dia. cutting of road 1.5 mtr. To 2.0 mtr below ground without pipe, as per the direction of E/I, complete in all respect. 13 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable enteies Electrical control panel with TPN MCCBs (Four pole 36 KA with thermal maganatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc.) in each phase with touch type selector switches for different reading, instrument fuses, current transfomer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B only.Incoming100 Amp. MCCB-1 NoOutgoing(a) 63 Amp. MCCB-2 Nos.(ii) Cat. B. Pannel Cubicle Type each 811(PWD)SOR-2018 14 S/W of submain with two number 4 sq.mm. PVC insulated 1100 V grade single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 8 SWG GI earth continuity wire etc, complete in allrespects{289(A) SOR-2018} 15 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 807(PWD)SOR-2018(F)(ii) 40 A TPN 16 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. complete work as per direction of E/I. 725(a)(PWD)SOR-2018 17 Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge.710(PWD)SOR-2018

INR 5900 /-

INR 1.16 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB