Tender For Supply Installation Testing And Commissioning Of Lift At Salt Lake Sub-Divisional Hospital, North 24 Paranas, kolkata-West Bengal

Tender For Supply Installation testing And Commissioning Of Lift At Salt Lake Sub-Divisional Hospital, North 24 Paranas- 1 SITC of Automatic Lift for IPD Building ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation afterfinal testingin the existing liftshaftcomplete with all accessories andrepairing thedamage wall / floor if any etc to complete as reqd.Make : OTIS / KONE/SCHINDLERType: Deeper Car Passenger Lift . Load : 15 PassengerControl: Microprocessor based with AC variable voltage & variable frequency( VVVF)Machine:- Energy efficient machine room less.Position of Machine Room: Above shaftSpeed:1 Mtrs./ SecFloor served: G+3Landing: 4, all on samesideTotal Rise :14 Mtr(Approx) (Bidder should visit the site) 2 Operation: Microprocessor based simplex fullcollectivewith or without attendant.Signals: LCD car position indicator,car travels direction indicator in car & at all landing with call registration indicator.Leveling accuracy:±5 mm(Micro levelling arrangement ) 3 CARCar inside :1000 mm (W) x 2400 (D) mm x 2200mm(H) suitable for Strecher accomodation or as per standard design of Awardee Agency satisfying IS code.Car Entrance : Clear Opening 900 mm Wide x 2100 mm High protected with car doorCar Enclosure: Stainless Steelsheet (20 SWG) with Hairline finish withhand railCar Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting andFanCar Ventilation: Pressure fan with anodised aluminium grill.Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Departments Order). 4 Car Door:Stainless Steel Centre Opening automatic door withcontrolled door drive systemLanding Door: Stainless Steel Centre Opening/ Side Opening automatic door withcontrolled door drive system & synchronizing operation with car door.Door Opening: Automaticpower oprated door with full length Photocell assembly light curtain sensor 5 PROTECTIVE DEVICES & OTHER ACESSORIESARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and giveaudiodisplay indicationEmergency lighting in car: Battery operated emergency lighting in the lift car.Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control RoomEmergency Alarm: Battery operated alarm bell system in lift car and control room 6 Fireman switch:Fireman switch at main landing terminal.a)Two Hrs Fire rated and provision of the NBC Part IV 2016 b)The Lift are design as Fire Lift and Shall be conspicuously indicated/marked. Voice Synthesizer: Voice announcementsystem (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.Coated steel belt - As per manufacturers standard conforming to IS 7 DIMENSION OF SHAFT & POWER SUPPLYAvailable Shaft Dimension : 2200 mm (W) X 2850 mm(D)Pit Depth : 1360 mm (Bidder should visit the site)Overhead : 4800mm(Bidder should visit the site)Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per ISN.B. Rates should be quotedwith minor civil works, wall cutting andmending good the damages to the original finish. 8 SITC of Automatic Lift( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation afterfinal testingin the existing liftshaftcomplete with all accessories andrepairing thedamage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLERType: Deeper Car Passenger Lift . Load : 15 Passenger /1020 Kg Control: Microprocessor based with AC variable voltage & variable frequency( VVVF)Machine:- Energy efficient machine, Gearless, With Machine Room 9 Position of Machine Room: Above shaftSpeed:1 Mtrs./ SecFloor served: G+3Landing: 4, all on samesideTotal Rise :14 Mtr(Approx) (Bidder should visit the site)Operation: Microprocessor based duplex fullcollectivewith or without attendant.Signals: LCD car position indicator,car travels direction indicator in car & at all landing with call registration indicator.Leveling accuracy:±5 mm(Micro levelling arrangement ) 10 CARCar inside :1000 mm (W) x 2400 (D) mm x 2200mm(H) suitable for Strecher accomodation or as per standard design of Awardee Agency satisfying IS code. Car Entrance : Clear Opening (a)900 mm Wide x 2100 mm (b)900mmx2100 mmHigh protected with car doorCar Enclosure: Stainless Steelsheet (20 SWG) with Hairline finish withhand railCar Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting andFanCar Ventilation: Pressure fan with anodised aluminium grill.Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Departments Order). 11 Car Door:Stainless Steel Centre Opening automatic door withcontrolled door drive systemLanding Door: Stainless Steel Centre Opening / Side Opening automatic door withcontrolled door drive system & synchronizing operation with car door.Door Opening: Automaticpower oprated door with full length Photocell assembly light curtain sensor 12 PROTECTIVE DEVICES & OTHER ACESSORIESARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and giveaudiodisplay indicationEmergency lighting in car: Battery operated emergency lighting in the lift car.Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room 13 Emergency Alarm: Battery operated alarm bell system in lift car and control roomFireman switch:Fireman switch at main landing terminal.a)Two Hrs Fire rated and provision of the NBC Part IV 2016 b)The Lift are design as Fire Lift and Shall be conspicuously indicated/marked. Voice Synthesizer: Voice announcementsystem (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.Coated steel belt - As per manufacturers standard conforming to IS 14 DIMENSION OF SHAFT & POWER SUPPLYAvailable Shaft Dimension : (a)1650 mm (W) X 2750 mm(D) (b)1650 mm (W) X 2750 mmPit Depth : 1200 mm (Bidder should visit the site)Overhead : 4400mm(Bidder should visit the site)(Both are Same)Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per ISN.B. Rates should be quotedwith minor civil works, wall cutting andmending good the damages to the original finish. 15 Dismaintling& remove from lift well3 nos Existing RunningLift with its all Bracket,Rope,Rail,Car,Machine and Gate and all Other accessories with buy back. 16 (Rate should be quotated including all taxes and duties, GST)

Refer document

INR 55 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB