Work Name:Annual Plan-Proj.No -18/25-26RENOVATION OF PULLAATTUVILA DWS IN WARD 10-18/25-26-General Civil Work
Sl. No.
Item Description
1
Maintenance
2
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
3
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4
OD264069/2025-2026:Man coolie forcleaning
5
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
6
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources)
7
13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
8
OD264163/2025-2026:providing and fixing pre coat galvanised iron profille sheets(size,shape and pitch of corrugationas approved by Engineer-in-charge)0.35mm(+0.05%),total coated thickness with zinc coating120 grams per sqm as parts is.277,m 240 mpa steel grace,5-7 microns epoxy primer onbothside.of the sheet and polyester top coat 15-18 microns.sheet should have protective guardfilm of 25 microns minimum to avoid scratches during transportation and should be supplied insingle length upto 12 metre or as desired by E ngineer-in-charges .The sheet shall be fixedusing self drilling/ self tapping srews of size(5.5*55mm) with EDPM seal,complete upto anypitch in horizontal/vertical or curved surfaces,excluding the cost purlins,rafters and trusses andincluding cutting to size and shape wherever required
9
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10
11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
