Name of Work: वार्ड न०15 सरोखनपुर में चित्रगुप्त कुटी पर इंटरलॉकिंग मरम्मत एवं चबूतरा निर्माणकार्यं
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1 DSR
2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR no. 4.1.8
3
Brick work with common burnt clay (non modular) bricks of class-150 3 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) as per SI No- 6.1.1 DSR
4
Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement: 6 coarse sand) as per SI no 6.4.2 DSR
5
12 mm thick cement plaster of mix 1:6 (1 cement & 6 course sand) Outer Side as per IS 13.4.2
6
Providing & Laying in position cement concrete of specified grade excluding the cost of centering & shuttering-All work up to plinth level:1:2:4 (1 cement: 2 coarse sand (zone-II) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources. As Per DSR 4.1.3
7
Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per Si no. -13.46.1 Two Coats DSR
8
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and 8 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. D.S.R. (2023). 10.16.1
9
Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). D.S.R. (2023). 16.15.2
10
Supply and fixing of informatory M.S sign board, size 1.2X0.90m made of 18mm gauge M.S sheet fic in ISA 40X40X6mm, frame support in back side by 40X5mm flat iron on all four side along with to vertical post of2.90mt. Diagonal bracing of size 40x5mm fiat iron, electrically welded and nainted with one coat red oxide primer and 2 coat supener quality enamel paint with lettering work of required specified information also l/c fixing in trench both side C.C. 1:2:4 size 0.45 x 0.45x0.50 Required for proper complation of the work. Reference Specification S.I. No. 502
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
