Tender For Painting & Polishing And Certain Repair Of Steel Furniture Articles Of Camero Under Ge (Af) Subroto Park And Painting & Polishing And Certain Repair Of Wooden Furniture Articles Of Camero Under Ge (Af) Subroto Park, New Delhi-Delhi

Tender For Painting & Polishing And Certain Repair Of Steel Furniture Articles Of Camero Under Ge (Af) Subroto Park And Painting & Polishing And Certain Repair Of Wooden Furniture Articles Of Camero Under Ge (Af) Subroto Park; 1 M & L for preparation of old wooden polished surfacesby rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with grinder machine, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified anddirected . 2 Bed hard 3 Chair dinning cushioned 4 Chair dinning MAP (JCO/OR) 5 Chair dinning 6 Chair writing 7 Chair easy 8 Stool dressing CB/MAP 9 Table peg 10 Teapoy 11 Table centre 12 Table 900mmx600mm without drawer 13 Table 900mmx600mm with drawer 14 Table 900mmx900mm 15 Table dinning 1200mmx900mm 16 Table dinning 6 pers 17 Table dinning 8 pers 18 Table bed side 19 Hat stand with mirror 20 Bin soiled linen FD-244 21 Table dressing gents with mirror 22 Table dressing ladies with mirror 23 Side board 24 Table writing 25 Book Case(W) 26 Sofa set 5 seater FD-281/373 27 Sofa set 4seater FD-281 28 Table office offr (W) 29 M&L for repair bedby replacing the following unserviceable parts with first class teakwood complete all as per drawings and as directed.(DRG NO. FD-246/247) 30 Long rail. 31 Stiffener 32 Head rest 33 Foot rest 34 S& F L shape MS flat iron 30mm x 5mm x125 mm long (painted with 1st gradeblack colour synthetic enamel paint over a coat of red oxide primer) between leg and railto tight the whole frame 35 3.5/4mm thick teak face plywood, including half round teakwood beading if broken, ofboth side of head rest complete. 36 3.5/4mm thick teak face plywood, including half round teakwood beading if broken, ofboth side of foot rest complete. 37 Plywood 12mm thick(9 ply) BWR Gde of suitable size. 38 M&L forrepair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood. complete all asper drawings and as directed.(Drg No FD/MAP-II/04,FD/E6/MAP/10(R))Note:- sample and shade of materials will be determined as per actual requirement at site.cost of rexine cloth shall not be less than 350/-per meter tapestry cloth shall not be less than 250/- per meter. 39 Front leg 40 Rear leg 41 Rail 42 stiffener 43 only tapestry cloth of seat complete 44 vertical strip 45 Rexine cloth of seat complete 46 Foam 75mm (40 D) of seat complete. 47 Plywood 12mm thick (9 ply) MR gde 48 PVC shoe 15mm dia of approved quality 49 M&L for repair Chair diningby replacing the following unserviceable parts with first class teakwood complete all as per drawing and directed. (DRG NO. FD-279/270/228/203 FD/MAP-II/05 ) 50 Front leg. 51 Rear leg. 52 Stiffener. 53 Rail. 54 PVC shoe 15mm dia of approved quality. 55 Back rest. 56 M&L forrepairChair writing by replacing the following unserviceable parts with first class teak wood complete all as per drawing & as directed.(DRG NO. FD-280/250) 57 Front leg. 58 Rear leg. 59 Arm. 60 Stiffener. 61 Rail. 62 PVC shoe 15mm dia of approved quality. 63 M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge.(DRG NO. FD-229/201) 64 Leg 65 Arm. 66 Rail. 67 PVC shoe 15mm dia of approved quality. 68 M&Lfor repairPeg tableby replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD-384/277/236) 69 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. 70 Leg made out of first class teakwood. 71 Front rail made out of first class teakwood. 72 Side rail made out of first class teakwood. 73 Stiffener made out of first class teakwood. 74 PVC shoe 15mm dia of approved quality. 75 M&L for removing existing old/unserviceable canes from different types of chairs and recaning the same with 2mm half round dia made out of virgin plastic in godrej pattern as shown on relevent drawings complete all as specified and directed. 76 M&Lfor repairteapoyby replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD-382/278/232/34) 77 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. 78 Leg made out of first class teakwood. 79 Front rail made out of first class teakwood. 80 Side rail made out of first class teakwood. 81 Stiffener made out of first class teakwood. 82 PVC shoe 20mm dia of approved quality. 83 M&Lfor repairtable centre by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD-134/235/274/375) 84 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size 85 Leg made out of first class teakwood. 86 Front rail made out of first class teakwood. 87 Side rail made out of first class teakwood. 88 Stiffener made out of first class teakwood. 89 PVC shoe 20mm dia of approved quality. 90 M&Lfor repairtable 900mmx600mm with/without drawerby replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD-283/224/284/281/223) 91 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size 92 Leg made out of first class teakwood. 93 Front/rear rail made out of first class teakwood. 94 side rail made out of first class teakwood. 95 Stiffener made out of first class teakwood. 96 Drawer complete. 97 PVC shoe 20mm dia of approved quality. 98 M&L for repair Table 900mm x900mmby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD-291) 99 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size 100 Leg made out of first class teakwood. 101 side rail made out of first class teakwood. 102 Rail made out of first class teakwood. 103 PVC shoe 25mm dia of approved quality. 104 M&L for repair Table dinning (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed.(DRG NO. FD/MAP-II/03) 105 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. 106 Leg made out of first class teakwood. 107 Front/rear rail made out of first class teakwood. 108 Side rail made out of first class teakwood. 109 Stiffener made out of first class teakwood. 110 PVC shoe 25mm dia of approved quality. 111 M&L for repair Table dinning6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed(DRG NO. FD-273/239/30(M)/FD/MAP-II/03) 112 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size 113 Leg made out of first class teakwood. 114 Front rail made out of first class teakwood. 115 Side rail made out of first class teakwood. 116 Stiffener made out of first class teakwood. 117 PVC shoe 25mm dia of approved quality. 118 M&L for repair Table dinning8 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) complete all as per drawing & as directed(DRG NO. FD-273/239/30(M)) 119 Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size 120 Leg made out of first class teakwood. 121 front rail made out of first class teakwood. 122 side rail made out of first class teakwood. 123 Stiffener made out of first class teakwood. 124 PVC shoe 25mm dia of approved quality. 125 M&L forrepair Table bed side by replacing the following parts with first class teakwood/ prelaminated particle board (exterior gde) complete all as per drawing & as directed(DRG NO. FD-276/248/210) 126 Top made out of18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11)with approved shadeduly providedteakwood beading infront of suitable size. 127 Side complete 128 Bottom complete 129 Shelf 12mm thickcomplete 130 Back ply 6mm thick MR Gde complete 131 M&L for repair Table dressing gents with mirror by replacing the following unserviceable parts complete as per drawing & as directed. (DRG NO. FD-230/31(M)) 132 Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11)duly provided teakwood beading infront of suitable size. 133 Bottom complete 134 Side complete. 135 Back ply of base made out of plywood 6mm thick( 9 ply) MR gde complete. 136 Only Mirror 5mm thick of suitable size. 137 Mirror with Frame made out of first class teakwood and 6mm thick MR Gde plywood complete. 138 Drawer complete. 139 M&L for repair Table dressing ladies with mirror by replacing the following unserviceable parts completeall as per drawing & as directed.(DRG NO. FD-251/32(M)) 140 Top made of 18/19mm thick MDF board 141 Bottom complete 142 Side complete 143 Back ply of base made out of plywood 6mm thick (9ply) MR gde complete 144 Only Mirror 5mm thick of suitable size 145 Plain glass 5 mm thick for sliding 146 Aluminium channel complete of suitable size for sliding of glass 147 Drawer complete 148 Leg with frame made out of first class teakwood 149 M&L for repair Side board by replacing the following unseviceble partscomplete all as per drawing and as directed.(DRG NO. FD-241,371) 150 Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) with approvedshade duly provided first class teakwood beading infront of suitable size. 151 Bottom complete. 152 Sidecomplete. 153 Partition complete. 154 Single shutter duly provided teakwood beading on edges complete. 155 Shelf 12mm thickcomplete. 156 Back ply 6mm thick MR gde. 157 Legs with frame made out from first class teak wood complete. 158 Drawer complete. 159 M&L for repair Bin soiled linen multipurpose by replacing the following unserviceable partscomplete all as per drawing and as directed.(DRG NO. FD/E6/MAP/09) 160 Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing whiteon other side duly provided PVC beading all around of approved quality 161 Bottom complete 162 Sidecomplete. 163 Partition complete. 164 Single shutter duly provided teakwood beading on edges complete. 165 Back ply 12mm thick (9 ply) MR gde. 166 Legs with frame made out of first class teakwood complete. 167 Drawer complete. 168 CP handle of approved qulity and suitable size. 169 M&L for repairTable writingby replacing the following unserviceable partscomplete all as per drawing & as directed.(DRG NO. FD-275/249/33(M)) 170 Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) of approved shadeduly providing teakwood beading all around complete 171 Leg made out of first class teakwood complete 172 Front railcomplete 173 Side railcomplete 174 Side stiffener complete 175 Center stiffener complete 176 S & F Teakwoodframe( comprising one stiffener and two legs) of suitable size and shape 177 Drawer complete 178 Lock of suitable size with duplicate key complete 179 M&L forrepairBook case wooden by replacing the following unserviceable parts complete all as per drawing & as directed.(DRG NO. FD- 237) 180 Top made out of18/19 mm thick pre-laminated particle boardof approved shadeduly provided with teakwood beading of suitable size. 181 Bottom complete 182 Side complete 183 Shelf complete 184 shutter complete 185 Leg with frame made out of first class teakwood complete 186 Back ply 6mm thick MR Gde complete 187 Lock of suitable size with duplicate key complete. 188 M&L for repair Sofa setby replacing the following unserviceable parts with first class teakwood complete allas per drawing and as directed.(DRG NO. FD-281/373) 189 Leg 190 Arm. 191 side rail. 192 Bottom seat/back. 193 Front rail of single seater. 194 Front rail of three seater. 195 Back rest rail top/side of single. 196 Back rest rail side of three seater. 197 Back rest rail top of three seater. 198 Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth and cushion of approved quality and zip shall be provided three sides of the cushion cover complete all as specified and directed.Note:- Cost of tapestry cloth shall not be less than 250/- per meter. 199 Removing of old foam cushion with tapestry cloth from back and S&F new P.U. Foam cushion 45mm thick ( 40 density) duly covered with approved quality of tapestry cloth including all necessary repair and replacement of required materials like jute cloth, wooden batton etc. complete all as specified and directed.Note:- cost of tapestry cloth shall not be less than 250/- per meter. 200 Removing worn out tapestry cloth from old cushion of seat/Back and replacing the same with new tapestry cloth of approved quality and zip shall be provided three sides of the cushion cover complete all as specified and directed. Note:- cost of tapestry cloth shall not be less than 250/- per meter. 201 M&L for repair fully uphostrysofa set 5 seater cladded with tapestry cloth by replacing tapesty cloth of approved quality including replacement of unserviceable material like cotton,coir,foam,GI spring, wooden members etc. and polishing the exposed surface of the same with high gloss finish of french polish complete all as per drawing/ TP and as directed.Note:-(i) Sample and shade of material will be determined as per actual requirement at site.(ii) Cost of tapestry cloth shall not be less than 350/- per meter. 202 M&L for dry cleaning of full upholsterysofa set 5 seater by soda,shampoo ,castic,urea, chemical etc to clear the dust complete all as specified and directed. 203 M&L for repair hat stand with mirror by replacing the following parts with approved ones complete all as per drawing and as directed.(DRG NO. FD-233) 204 First class TW beading at all around of frame 205 Mirror 5mm thick. 206 Aluminium pegs, 100mm long. 207 Aluminium nail hook, 50mm long. 208 Frame made out of first class teakwood and back side 4mm thick MR Gde plywood complete . 209 M&L for Repair to various type of wooden chairs andtightening the whole frame of chair FD/TP complete all as specified and directed. 210 S & F as in repairname board and Quarter number board of size 15 x 8 inch plastic/acrylic board complete all as specified and directed 211 M&L for preparation of old painted iron & steel surfaces (externally and internally complete) of following furniture itemsby scraping & rubbing down with grinder machine, removing dents and scratches if any filling the same with paste filler and applying two coat ofsynthetic enamel paint by spray equipmentof 1st Grade quality,(Shade/colour shall be approved by BSO) complete all as specified and directed . 212 Almirah largewith shelves steel. 213 Almirah med/small steel with shelves. 214 Locker bedside steel. 215 Book shelf open large steel 216 Table with drawer 900mmx600mmx760mm (steel) 217 Table steel 900mmx600mmx760mm 218 Table steel 900mmx900mmx760mm 219 Table office clk steel. 220 Table office offr steel. 221 Table bed side (MAP) 222 Bed Hard (MAP) 223 Chair executive revolving high /medium/low back, chair computer, chair writing, chair conference, chair visitor etc.( FD/MAP/ TP) 224 Rack 6 tier 225 Rack pigeon hole 226 Almirah glazed large steel. 227 Teapoy Verandah Steel 228 Table computer MAP/TP 229 Almirah large1/2H hanging 1/2Shelf steel. 230 Filing Cabinet 231 Shoe rack steel 232 M&L for repair Almirah steel large/Almirah steel 1/2H 1/2shelfby replacingthe following unserviceable parts with approved ones complete all as per the drawings and as directed.(DRG NO. FD-1031/ 67(M)) /FD/E6/MAP/18) 233 MS lock 6 leverwith duplicate key. 234 Stainless steelhandle 150mm long. 235 Complete internal locking device duly painted with one coat of red oxide primer. 236 Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. 237 Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. 238 Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. 239 M&L for repair Almirahmedium/small steel by replacingthe following unserviceable parts with approved ones complete all as per the drawings and as directed.(DRG NO. FD-1032/243/67M)) 240 MS lock 6 leverwith duplicate key. 241 Stainless steel handle 150mm long. 242 Complete internal locking device duly painted with one coat of red oxide primer. 243 Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer 244 Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer 245 Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. 246 M&L forrepair locker steel by replecing the following parts with approved ones complete all as per drawing and as directed .(DRG NO. FD-257/1029) 247 MS chromium platedhasp and staple 75mm long. 248 MS chromium plated handle 100mm long. 249 Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer 250 M&L for repair book case steel by replacing the following parts with approved onescomplete all as per the drawings and as directed.(DRG NO. FD-1028/TP) 251 SS handle100mm long. 252 Lock of suitable size with duplicate key to lock all four shutter with one key . 253 Pane glass 3 mm thick of suitable size. 254 M&L for repair Teapoy verandah by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish complete all as per the drawings and as directed. (DRG NO. FD-255 /208/ 35 ) 255 M&L for repair table steel with /without drawer (900mmx600mmx760mm) by replacing the following parts with approved ones as mentioned below complete allas per the drawings and as directed. (DRG NO. FD-1007/1008 ) 256 Top made out of 18/19mm thick pre-laminated MDF board (exterior gde) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish 257 Hard rubber toe of suitable size 258 Removingold u/s top from table 900mmx900mm steel and S&F newtop made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Complete all as per the drawings and as directed.(FD-1009) 259 S&F Hard rubber toe for table 900mmx900mm of approved quality and suitable size complete all as specified and directed. 260 M&L for repair table office clerks steel by replacing the following parts with approved ones complete all as per the drawings and as directed. (DRG NO. FD-1004/381/307/84(M)). 261 MS lock of suitable size with duplicate key 262 Table Top made out of 18/19mm thick pre-laminated MDF board exterior gde ( Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish 263 S& F Hard rubber toe of suitable size. 264 M&L for repair table office officer steel by replacing the following parts with approved ones complete all as per drawings and as directed.(DRG NO. FD-1003/84(M)). 265 MS lock of suitable size with duplicate key. 266 Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing whiteon other side duly teak wood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish 267 Hard rubber toe of suitable size. 268 M&L for repair Table bed side MAP by replacing the following parts with prelaminated MDF board(exterior gde)/plywood MR gde complete all as per drawings and as directed .(DRG NO. FD/E6/MAP/15,FD/E6/MAP/15(R)) 269 Top made out of18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade andbalancing white on other side duly provided with teakwood beading of suitable size. 270 Side made out of18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade andbalancing white on other side complete. 271 Back made out of plywood 6mm thick MR Gde. 272 Bottom made out of plywood 6mm thick MR Gde. 273 Upper drawer complete. 274 Lower drawer complete. 275 CP handle of approved qulity and suitable size. 276 Telescopic channel of suitable size and approved quality. 277 M&L for repair bed hard MAPby replacing the following unserviceable parts with approved ones complete allas per drawing and as directed.(DRG NO. FD/E6/MAP/08,FD/E6/MAP/08®) 278 Plywood top 12mm(9 ply) thick MR Gde. ISI Mark 279 Nut and bolt with washer complete. 280 Pre-laminated MDFboard(exterior gde) of Head rest complete. 281 Pre-laminated MDFboard(exterior gde) of foot rest complete. 282 PVC cap of suitable size. 283 M&L for repairs Chair executive revolvinghigh backby replacingunserviceable parts as per drawings/ TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter . 284 Only tapestry cloth of seat and back complete. 285 Only rexine cloth of seat and back complete. 286 foam of seat/ back complete. 287 Only Plywoodof seat /back. 288 Hydraulic of suitable size. 289 Base CP as required of suitable size and pattern 290 Base PVC of suitable size and pattern. 291 Wheel of suitable size and pattern. 292 Arms as required by size and design(spl). 293 M&L for repairs to Chair revolving med/ low backby replacingunserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter . 294 Only tapestry cloth of seat and back complete. 295 Only rexine cloth of seat and back complete. 296 foam of seat/ back complete. 297 Only Plywood of seat /back. 298 Hydraulic of suitable size. 299 Base PVC of suitable size pattern. 300 Base CP as reqd of suitable size and pattern 301 Wheel of suitable size and pattern. 302 Arms as requred by size and design. 303 M&L for repair to Chair computer revolving by replacingunserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter. 304 Only tapestry cloth of seat and back complete. 305 Foam of seat/ back complete. 306 Only Plywood of seat /back. 307 Base Stainless Steel pedestal assembly complete 308 Hydraulic of suitable size. 309 Wheel of suitable size and pattern. 310 Arms as required by size and design. 311 M&L for repair Chair writing Map by replacingunserviceable parts as per drawing complete all as specified and directed.(DRG NO. FD/E6/MAP/12).Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 150/-per meter. 312 Only tapestry cloth of seat and back complete. 313 foam of seat/ back complete. 314 Only Plywood of seat /back. 315 Arms as requred by size and design. 316 M&L for repair to Chair visitorby replacingunserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of rexine cloth shall not be less than 350/-per meterand .Cost of tapestry cloth shall not be less than 150/-per meter. . 317 Only tapestry cloth of seat and back complete. 318 Only rexine cloth of seat and back complete. 319 Foam of seat/ back complete. 320 Only Plywood of seat /back 321 Removing unserviceable plywood fromCharpoy plytopand providing 12mm thick (9 ply) plywood BWR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paintof approved shade.Rest all as per drawing & as directed by engr-in-chage.(DRG NO. FD/MAP/-II/01) 322 Removing unserviceable plywood fromCharpoy folding and S&F 8/9mm thick plywood MR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paintof approved shade complete all as specified and directed.(DRG NO. FD-388(R) ) 323 Removing unserviceable plywood fromCharpoy GI Pipe and S&F 12 mm thick(9 ply)plywood ofBWR Gde duly teakwood beading 12mm thick half round diaall around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixingwith suitable size of nut,bolt and washer to frame after titening of complete frame including welding of loose joints,if any and painting of flat/angle iron by brush with one coat of 1st quality synthetic enamel paint of approved shade complete all as specified and directed.(DRG NO. FD-220 ) Note:- shape,pattern and size of nut, bolt and washer shall be approved by GE. 324 Long rail made out of 32mm bore GI pipe medium grade of suitable size duly threaded up to 22mm on both side. 325 Fixing of short rail of suitable size made out from long rail as obtained from Serial Item No. 52.01 above duly threaded up to 22mm at both end. 326 Fixing of leg of suitable size made out from short rail as obtained from sr no 52.02 above duly threaded up to 22mm. 327 GI elbow 3 way medium gde ISI marked suitable for 32mm bore GI pipe. 328 GI check nut medium gde of suitable for 32mm bore GI pipe. 329 M&L to repair Table computer by replcing the following unseviceable partsall as per the drawings and as directed by engr-in-charge. (DRG NO.FD/E6/MAP/03,TP) 330 Top made out of18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side withapproved shade and balancing white on other side duly provided withPVC beading of as requairedcomplete. 331 Side made out of18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade andbalancing white on other side. 332 Board drawer complete 333 Mouse drawer complete 334 Middle shelfcomplete 335 Bottom shelfcomplete 336 Telescopic channel of suitable size and approved qualityNote:-Sample and shade of materials will be determined as per actual requirement at site. 337 M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with two coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.8 thick plastic cane made out of virgin plastic, in existing pattern complete all as specified and directed.( Drg No. FD-359/259/256/19 ) 338 S&F hard rubber shoe of approved qualitysuitable for chair verandah complete all as specified and directed.

INR 500 /-

INR 45.89 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB