Tender For Providing Ro Plant At Ward No 5 Kottai Street In Palacode Town Panchayat
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
19 Sep 2025
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
palacode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Ro Plant At Ward No 5 Kottai Street In Palacode Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete |
| 2 | Cement concrete 1:4:8 (one of cement five of sand and ten of aggregate) using 40mm size hard broken granite stone jelly for flooring including well rammed and rendering the top surface rough to receive the floor finish, curing etc. complete complying with standard specifications. The rate is inclusive of necessary planking for panelling into bays wherever necessary and as directed by the departmental officers. (Note that the Cement concrete shall be laid in Bay by Bay) |
| 3 | Plain Cement Concrete 1:2:4 (one cement, twoM.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 4 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\"in cement mortar 1:5 (One cement and fiveM.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 5 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification |
| 7 | Supplying and fixing up of PPGI galvalume sheet 0.47mm thick over MS truss |
| 8 | Paving the floor with double charged vetrifiedtiles of approved size, colour and company laid in cement morter 1:3 [one cement and three M sand] 20mm. Thick and pointing with epoxy grouting to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed. for 10m2 |
| 9 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVCconcealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)SD. 25 |
| 10 | Supply & Fixing of LED mirror light - 11 Wwarm white 2700K - 3000 K - , Led efficasy - > 100 lumes/watt with inbuilt driver input voltage range 145-265 V AC PF > 0.9, basebody extruted aluminium with polycarnote milkydiffuser (ELMR09) @Mirror(Page No 70) item 25 Market Rate |
| 11 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (withMedia Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control |
AI Tender Summary
Tender Timeline
Sep 16, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 19, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender