|
| 1 | Measuring Steel Tape (5 meters) |
| 2 | Combination Plier Insulated (Length- 200 mm (8 inch)) |
| 3 | Screwdriver Insulated (Size: 150 mm x 4mm) |
| 4 | Screwdriver Insulated (Size: 150mm x 6 mm) |
| 5 | Electrician screwdriver thin stem insulated handle (4mm X 100 mm) |
| 6 | Heavy Duty Screwdriver insulated (5mm X 200 mm) |
| 7 | Punch Centre (overall length: 150 mm; tip diameter: 9 mm) |
| 8 | Knife Double Bladed Electrician (Size: 100 mm) |
| 9 | Neon Tester |
| 10 | Steel Rule Graduated both in Metric and English Unit (overall length: 300 mm) |
| 11 | Hammer, cross peen with handle (weight: 250 grams) |
| 12 | Hammer, ball peen with handle (weight: 500 grams) |
| 13 | Chisel firmer with wooden Handle (overall length: 200 mm, Blade width: 6 mm) |
| 14 | Allen Key alloy steel |
| 15 | Bearing Puller (inside and outside) jaw open type |
| 16 | Scissors blade, SS |
| 17 | Scissors blade, SS (Blade length: 150 mm) |
| 18 | Wire Cutter and Stripper (Overall length: 150 mm) |
| 19 | Hacksaw frame, Adjustable Frame (300 mm) |
| 20 | Try Square, Blade length: 150 mm |
| 21 | Pliers long nose insulated, Overall length: 150 mm |
| 22 | Pliers flat nose insulated, Overall length: 200 mm |
| 23 | Pliers round nose insulated, Overall length: 100 mm |
| 24 | D.E. metric Spanner Double Ended |
| 25 | Gauge, wire imperial stainless steel marked in SWG & mm(SWG 0–36 and metric equivalents (0.30 mm to 8.23 mm)) |
| 26 | File Flat 250mm Smooth |
| 27 | Oil Can Pressure feed system, Capacity:250 ml |
| 28 | Hydrometer |
| 29 | Portable Electric Drill Machine with impact driver |
| 30 | Out Side Micrometer (Measuring range: 0–25 mm) |
| 31 | Rheostat (Sliding type)(Rheostat - 0-25 Ohm, 2Amp) |
| 32 | safety Helmet |
| 33 | Safety Belt |
| 34 | Digital Multi Meter |
| 35 | A.C. Voltmeter M.I.analog, portable box type housed in Wooden case |
| 36 | Ammeter MC analog, portable box type housed in Wooden case |
| 37 | AC Ammeter MI, analog, portable box type housed in Wooden case |
| 38 | Kilo Wattmeter Analog, portable box type housed in Wooden case |
| 39 | A.C. Energy Meter |
| 40 | Power Factor Meter (Digital 440V, 20A, 3Phase, Portable) |
| 41 | Frequency Meter (45 to 55Hz) |
| 42 | Tong Tester / Clamp Meter (0-100A Digital Type) |
| 43 | Megger (Analog - 500 V) |
| 44 | Single phase Transformer, Core Type, Air Cooled 1 KVA |
| 45 | Phase Sequence Indicator 3 Phase, 415 V |
| 46 | Soldering Iron (25-Wattt) |
| 47 | Soldering Iron (65-Watt) |
| 48 | Soldering Iron (120 Watt) |
| 49 | Electric Iron |
| 50 | A.C. Ceiling Fan |
| 51 | Motor Pump set (1 HP, 1 Phase, 240V) |
| 52 | Ceiling fan coil Winding Machine |
| 53 | Fire Extinguisher CO2 |
| 54 | Steel Rule with metric & British graduation (Length: -150mm) |
| 55 | Caliper hermaphrodite spring type (length: 150 mm) |
| 56 | Scriber (Length: 150 mm) |
| 57 | Screw driver (Overall length-10mmx150mm) |
| 58 | Chisel (Cold Flat 20 mm X 150 mm) |
| 59 | Hammer (Ball Pein 0.25 KG with Teak Wood Handle) |
| 60 | File -Flat (Second Cut 250 mm) |
| 61 | File Half Round Second Cut (Length:150 mm) |
| 62 | Safety goggles (for chipping &grinding) |
| 63 | Dot punch (Dimensions:10mmx100 mm) |
| 64 | Combination Set (300 mm) |
| 65 | Micrometer (Outside 0 - 25 mm LC 0.01 mm) |
| 66 | Universal vernier caliper-Range |
| 67 | Vernier Height Gauge (300 mm Graduated in Metric LC 0.02 mm NABL Accredited lab certificate) |
| 68 | Surface plate C.I with Stand and Cover |
| 69 | Marking table (Mild steel) |
| 70 | Universal angle plate (150mm x 150 mm) |
| 71 | Punch number set. |
| 72 | Drill bit (HSS Twist 3 to 12 mm by 0.5 mm Straight Shank) |
| 73 | Taps and dies complete set-in box (5, 6-, 8-, 10-, & 12-mm set of 5 Metric) |
| 74 | File (Knife Edge Smooth 150 mm) |
| 75 | File (Triangular Smooth 200 mm) |
| 76 | File (Square Second Cut 300 mm) |
| 77 | File (Triangular Second Cut 200 mm) |
| 78 | File flat second cut safe edge. Overall length: 300 |
| 79 | File (Flat Bastard 200 mm) |
| 80 | File (Flat Bastard 250 mm) |
| 81 | File (Half Round Second Cut 250 mm) |
| 82 | File (Half Round Bastard 250 mm) |
| 83 | File (Round Bastard 250 mm) |
| 84 | File (Hand Second Cut 150 mm) |
| 85 | File Card 3\" x 5\" Size Brass or Steel Wire) |
| 86 | Combination Plier Insulated ( Length- 150 mm) |
| 87 | Spanner Set (Tubular Box 6-32 mm set of 12 with Tommy Bar) |
| 88 | Scraper (Flat 150 mm) |
| 89 | Scraper (Triangular 150 mm) |
| 90 | Chisel (Cold Flat 10 mm X 100 mm) |
| 91 | Chisel (Cold Round Nose 9 mm X 100 mm) |
| 92 | Drill Chuck (Morse Taper 0 - 12 mm) |
| 93 | Pipe wrench (400mm) |
| 94 | Pipe vice (Cast Iron with hardened jaw open type 100 mm) |
| 95 | Bench Vice 150 mm |
| 96 | Machine vice. |
| 97 | Drilling machine bench |
| 98 | D.E. pedestal Grinding machine with wheels rough and smooth |
| 99 | Pyranometer |
| 100 | Magnetic Flux Meter |
| 101 | Sun Shine recorder |
| 102 | Battery Charger |
| 103 | Solar panels 250 Wp |
| 104 | Solar cell kit |
| 105 | Clinometer |
| 106 | Sprit Level |
| 107 | Inverter with Battery |
