Tender For Proposed Interior Furnishing Works For Kosgi Branch And Atm => Limited; INTERIOR FURNISHING WORKS: 1.0 PARTITIONS: Providing and fixing partition in position as per design with 50mmx50mm solid wood finished section frame work @ 600mmc/c both ways screwed to the floor and ceiling with M.S.Cleats and to be treated with anti termite oil. The measurement will be taken up to the false ceiling visible height in case of full height partition. The frame work will be claded with 9mm thick BWP plywood both sides and to be finished with 1.0mm laminate as per design with approved band adhesive. extra frame work to be fixed for fixing glass. In the glazed partition 12mm thick. modiguard/Saint Gobain clear float glass with Etching/sand blusting/granular blasting to be provided duly fixed with White beach/White ceader lipping 50mmx 25mm all complete duly natural polished and Melamine finish. Incase of Full height Partly glazed partition some portion to be raised as per drawing. The work should be completed as per specification, design & approval of the Architect. For the door 32mm solid core BWP flush door with a frame work of White beach/White ceader size 75mm x 62.5mm with necessary hold fast fixed to the wall/partition. Finished with 1.0MM laminate and lipping in all sides and 40mmx40mm white beach/white ceader wooden molulding to be provided along the periphery of the door frame. Supplying and fixing door accessory as door closure, brass hinges, Cylindrical/ Night latch locks and s.s.handle etc. 1.1 MAIN ENTRANCE FULL GLASS PARTITION 107.00 SFT Providing and fixing in position partly glazed Full Height Glazed Partition work as shown in the drawings in frame work at 50x100mm thick beach wood frame, glass 12mm thick toughened glass work as shown in the drawings with melamine polish, item including all necessary accessories, all labour charges, all taxes, complete for the finished item of work. 1.2 PARTLY GLAZED FULL HT. PARTITION AT MANAGER CABIN 168.52 SFT Providing and fixing in position partly glazed Full Height Partition work as shown in the drawings including door as shown in the drawings in frame work at 2’ x 2’ grid (horizontally and vertically) comprising of 2” x 2” saal wood Section and / or as per frame work shown in the drawings with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved shade and colours as shown in drawings. 1.3 SOLID PARTITION AT CASH COUNTERS, UPS, STRONG ROOM AND RECORD ROOM WITH DOORS 393.03 SFT Providing and fixing in position solid full height partition ( 2½” thick) in frame work with saal wood vertical members at 2’ c/c and 3 horizontal members at equal distance comprising of 2” x 2 saal wood section with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved make and shade as shown drawings. complete for finished of work in all respects. 1.4 PARTLY GLAZED HALF HT PARTITION 108.00 SFT Providing and fixing in position partly glazed low height partition ( 2½” thick) in frame work with saal wood vertical members at 2’ c/c and 3 horizontal members at equal distance comprising of 2” x 2 saal wood section with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved make and shade as shown drawings. Item to include 12mm thick glass Saint gobain make (clear / frosted) to be fixed as shown drawing. The exposed edges of the glass to be finished in mirror polish. Beech wood runner should be melamine polished in matching colour of laminate etc., complete for finished of work in all respects. 1.5 COVER FOR ROLLING SHUTTER 118.00 SFT Providing, fabricating and fixing cover for rolling shutter made of 2”x2” sal wood frame work spaced at 18” c/c both directions, fixing 19mm thick BWP Grade plywood and 1mm thick laminate (only out side) of approved shade with necessary locking arrangements. Separate flap door should be made for rolling shutter to operate. The Shutters should be provided with locking arrangement. 1.6 12MM THK TOUGHENED GLASS 52.25 SFT Providing & Fixing in position 12 mm thick toughened Glass at cash counter & Work Station Counters front side, including all necessary items, labour charges, all taxes etc., Complete for the finished item of work in all respects. 1.7 GRILL WORK AT CASH COUNTER TOP 44.00 SFT Aluminium Grill – Providing & Fixing of Aluminium Grills Glazed at Cash Counter. Made out of 2” x 2” hollow square frame section as directed. Work includes antirust coat & two coats of first quality enamel paint. All necessary Items, all taxes, Labour charges, etc., complete for finished of work in all respects. 2 DOORS 2.1 MAIN ENTRANCE DOOR 42.00 SFT Providing and fixing glass door for entry with 100mmx75mm beech frame wood work duly fixed with the partition/wall with hold fast duly polished. A white beach wood frame work size100mmx50mm as all round frame work with a decorative handle of 600mm of approved brand, floor spring Locks, etc all complete. 100mmx50mm thick stiles to be fixed on the frame 3 sides. 12mm thick toughened etched glass and Indian Bank logo frosted design with necessary sand blasting/granular blasting to be provided and edge should be machine bevelled polished. The work to be completed as per design and specification of the Architect all complete. The wooden portion to be duly melamine polished. 2.2 ATM ENTRANCE DOOR 21.00 SFT Fully glazed Ivory coloured powder coated Aluminum Shutter, hinged & mounted on floor spring of ISI make, with opaque film over Glass Door. There should be provision of standard MS rolling shutter finished with Red coloured Enamel paint of Asian/ British/ Berger of equivalent make. The rail of Rolling Shutter and top should be camouflaged by wooden box panelling whose exterior side to be finished with laminate as per above details. 2.3 MANAGER DOORS 42.00 SFT Providing, fabricating and fixing door frame in 2”x3” steam beach wood and fixing with frame of all round 5 x 2 steam beach wood frame of approved make. The door shall be glazed with 8 mm thick float glass fixed with beach wood beading of 12mm thick and having etching work (Etching cost considered @40/sft). Glazing portion of door shall be done in the same line / pattern as of the partition to which it is fixed. All open edges of door shall be leaped with beach wood beading and all wood to be finished with melamine polish. The door shall be fitted with door closer of approved make, 3 nos of heavy brass hinges, brush steel finish 6 lever mortise lock (set of three keys) and heavy door stopper, Union Bank of India bank logo of approved bank and all other fittings and fixture etc. complete and as per design and approval of Engineer-in-charge. 3.0 TABLES: Providing and fixing in position MANAGER table of size 6’-0” x 3’-0”, work station table (5-0x2-0), including Built in Storage (Credenza) by using 25 mm thick BWP plywood for top and 18mm thick BWP plywood for all other horizontal and vertical members Including Telescopic CPU Stand/ ready made keyboard tray shall be provided of approved model and make. Footrest made with T.W. member of size 4” x 1 ½” “finished with French polish. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make & shade and all exposed edges of table top & ply verticals to have 1” x ¼” beech lipping. All exposed beech sections to be melamine and Internal surfaces to have white enamel paint as directed. Item to include plywood boxing, all necessary hardware and fittings in Stainless Steel finish, lipping to all edges etc. complete for the finished item of work in all respects. 3.1 MANAGER TABLE (6-0 x 3-0) WITH TABLE TOP GLASS 1 NO 3.2 WORK STATION TABLES (5-0 x 2-6) 3 NOS 3.3 WORK STATION TABLES (4-6 x 2-6) 2 NOS 4 SIDE UNIT 2 NOS Providing and fixing Side Unit/Back unit having top 18 mm thick plywood finished with 1mm thick laminate. The drawers to be made out of 19mm thick Make BWP plywood in the front cladded with 1.0mm laminate sides to be made out of 12mm thick BWP plywood and bottom made out of 6mm thick BWP plywood duly painted in matching tone and it should play on drawer sliding channels. The shutters to be made out of 19mm thick BWP plywood and should play on drawer sliding castors on powder coated channels. The necessary locks, handles, etc to be provided. 75mmx12mm wooden skirting to be provided duly polished as per matching tone all along the visible areas. Inside of the unit to be enamel painted in matching tone. All the exposed edges of the boards/ plywoods to be covered with wooden lippings/mouldings duly polished all complete. The work to be completed as per approval and specification of the Architect 5.0 CASH COUNTER (5-0 WIDTH) 1 NO Providing and fixing top 19mm thick plywood finished with 1mm thick laminate, and all other front & side of cash counter made out of 19mmthick BWP plywood as per design cladded with 1.0mm thick laminate on side and front & the edges to be finished with necessary white beach or white ceader lippings, mouldings, etc. Special 150mm drawer to be made for the cash with dividers of 12mm thick BWP plywood The front of the drawer made out of 19mm thick BWP plywood finished with 1.0mm laminate, sides 12mm thick BWP plywood and bottom to be made of 6mm thick BWP plywood. The inside and sides of the drawer to be duly polished. The drawers and shutters to be provided with necessary drawer sliding channels, hinges, locks etc. A foot rest to be provided made out of 19mm thick BWP plywood duly polished. Inside of the unit to be polished in the matching tone. All visible areas to be covered with white beach of white ceader lippings, mouldings with natural polish. Wire manager, CPU trolly, keyboard tray, tea tray to be provided 75mmx12mm white beach white ceader skirting to be provided with natural polish in all visible areas and 18mm thick Plain Glass to be provided at counter 2nd top customer face. counter top at 1100 mm level. The work should be completed as per specification. Size: 8-0 x 7-6 x 8-3 6 SUGGESTION/ CHEQUE DROP BOX 2.0 EACH Manufacturing, supplying and fixing of suggestion box made of 19mm plywood and 1.0 mm thick lamination on top as per Bank’s specifications 7 WALL MOUNTED WRITING LEDGE: 1 EACH Providing and fixing writing ledge as per design made out 19mm plywood with necessary grove patterns 1.0mm thick laminate (color, vertical grain) to be cladded. Small boxes to be made out of 19mm BWP plywoods to be made on top of the writing ledge finished with 1.0mm laminate, inside enamel painted. The work to be completed as per design and approval of the architect. 8 STORAGES Providing and fixing in position Back, Full and Half height storages using 19mm thick BWP Grade Plywood of Shutters, Vertical and bottom, back 6mm thick BWP Grade plywood finished with 1mm thick laminates and all other sides shall be finished with white enamel paint as detailed therein. The Storage Units shall be provided with handles( Stainless Steel finish )as per approval of the Project Consultant / Bank. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make & shade and all exposed edges of plywood to have 1” x ¼” Hard wood lipping. All exposed Hard wood sections to be melamine in matching colour laminate and internal surfaces to have white enamel paint as directed. Item to include all necessary hardware and fittings in Stainless Steel finish, Godrej multipurpose locks including magnetic ball catcher etc. complete for the finished item of work. 8.1 BACK & FULL HEIGHT STORAGE 384.15 SFT 9 GYPSUM CEILING 420.00 SFT Providing & fixing as per design with suspended false ceiling consisting of 12mm.thk.Gyp. board suspended on G.I. framework to consists of G.I. perimeter channels 0.55 mm thk. x 20mm .x 30mm. along perimeter of false ceiling; screw fixed to wall/partition with nylon sleeves & screws @ 600mm. dc. Suspending GI. Intermediate channels of size 0.9mm thk.x45mmx15mm. from the soffit at max. distance 1220mm. dc with ceiling angle 0.55mm. thk.x2n5mm.x10mm. Fixed to soffit using proprietary supplied GI. Cleats & steel expansion fasteners. Ceiling section 0.55mm thick. web size 51.5mm & flanges 26mm. Each & 10.5 mm. lips fixed perpendicular to intermediate channel at 457mm. c/c Gyp board is screw fixed to ceiling section with 25mm. drywall screws at 230mm. c/c. boards to be finished with proprietary supplied jointing tape & jointing compound & sand papered to achieve a smooth finish etc. complete or as directed by the Architecture /Bank. Gyp ceiling where necessary as normal specification Rate should include all types of cut-outs, grooves ,moulding & plain troughs for tube lights / Down Lighter as directed by the designer. Note: Where RCC Slab is old and concrete is weal, the GI suspended channel shall be fixed with epoxy chemical and necessary load test to be carrid out before fixing Gypsum board fixing. Rate shall be inclusive of epoxy chemical and fixing of suspenders with chemical (Note:- Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves, vertical drops, mouldings etc.) 10 MINARAL FIBRE TILES 558.00 SFT Armstrong or Equivalent make False Celling of Trlock Sihouette Suspension System, Providing and Fixing in the true Horizontal level false ceiling system of Armstrong world industries. The suspension system shall be the Armstrong. Trulock Sihouette revealed profile grid system with 15mm wide flanges incorporating 3mm or 6mm central recess colour black revealed silhouette main runners and cross tees to have metered cruciform junctions. Main runners to be spaced at 12mm c/c fixed by using 2mm pre straightened GI Wire. Main tee, rotary stitched of size 15mm x 38mm x 3000mm at every 1200mm c/c maximum and 600mm c/c cross tee of size 15mm x 38mm x 600mm at every 1200mm c/c maximum and 19mm x 19mm x 3000 wall angel allround the wall to form grid size of 600mm x 600mm and suspending the grid using 2mm prestraightened Gi Wire and 6mm nylon raw plug at every 1200mm Intervals at the maintee laying of Armstrong mineral fiber SANDFINISH (DUNEMAX RH99) tiles manufactured by Armstrong world industries of size 600mm x 600mm x 19mm over the formed grid completed as directed, Making necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for A.C. unit in 19mm Thick BWP Grade Plywood with Stainless Steel hinges & Locks with moulding 1” x 1” for edges including finishing with white Plastic Emulsion Paint etc. Complete in all respects. (Note:- Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves, mouldings etc.) 11 ROLLER BLINDS 60.75 SFT Supply and fixing of Roller Blinds of approved make Mac/ Vista, quality and colour shade & pattern. The roller blinds to be fitted on to aluminium powder coated channels with height adjustment ropes complete with installation hardware etc., 12 SOFT BOARD/NOTICE BOARD 1 EACH Providing and fixing soft board with necessary framework with 12mm BWP plywood on top jolly board to be fixed finished with fabric @Rs 100, with necessary mouldings duly polished along the periphery. 13 Column/ Wall Panelling: 521.50 SFT Providing and fixing partition in position as per design with 50mm x 50mm aluminium frame work of approved make with @ 600mmc/c both ways screwed to the floor and ceiling with M.S.Cleats and to be treated with anti termite oil. The measurement will be taken up to the false ceiling visible height in case of full height partition. The frame work will be cladded with 19mm thick BWP plywood and to be finished with approved 1.0mm laminate as per design with approved band adhesive. The work should be completed as per specification, design & approval of the Architect. Concealing down take elect/ data cables / Switch boards, etc.) 14 RUNNING TABLE TOP 5.50 RFT Running table top for printer (1-3 Wide) : The counter shall have 19mm BWP boarder free ISI marked ply finished with 1.00mm laminate of approved shade. The top shall be supported brackets. The unit shall be finished with 1.00mm thick laminate of approved shade on all exposed sides and inner sides shall be finished with enamel paint. footrest shall be provided TOTAL OF INTERIOR FURNISHING WORKS RS
