|
| 1 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size up to 35 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required as per tender drawing |
| 2 | Supply, installation, testing and commissioning of size 4C x 16 Sqmm, 1100 V grade PVC insulated PVC sheathed/XLPE and armoured aluminium conductor power cable to IS 1554. Laying of cable will be paid saparately under relevant items |
| 3 | End termination of cables with brass compression glands and aluminiumlugs for 4.0 C x 16 sq.mm size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 kV grade as required. |
| 4 | SITC of electrically operated wet type 7.5 HP submersible motor & pump set of IST standard, 3 phase AC, 415V, 50Hz, 2900-3000 rpm. The shall have brass impeller, high grade steel shaft with 6 stage, having outlet size of 3\" dia to suit the borewell (150mm dia). The pump set shall be guaranteed for a period of one year from the date of commissioning. Make: Kirloskar/Crompton/KSB |
| 5 | SITC self-mounted, outdoor type 18 SWG MS sheet powder coated of size 45\" x 30\" x 9 \"(inches) box type panel board for Automatic Star Delta Starter for up to 10 HP Submersible pump. Panel should be roof type. Panel board is consisting with Automatic Star delta starter, one no. 125 Amp SFU with HRC fuse link for Incomer, 1 no. 63 Amp SFU for starter, 4 nos. suitable aluminium busbar, 01 no. digital Voltmeter with VSS, 01 no. digital Ammeter with ASS for Pump load, 3 nos. CT coil arrangement, single phasing preventer, earth fault preventer, over load relay, over current protection, ON/OFF push button, RUN, OFF & TRIP indicator, 3 nos. of RYB indicator with wiring arrangement etc. The panel should be fitted with 6 Kit Kat fuse of 63 ampere capacity. |
| 6 | Supply &installation of B class GI pipe of 3\" dia with required MS flange welded in pipe (each length of 10 feet). |
| 7 | SITC of 4 core x 4.0 Sqmm flat copper cable from Starter panel to Submersible pump with all required accessories like lugs, ferrules etc, |
| 8 | Supply & installation of accessories (Nut-bolts, Flange/Socket, packings, CI bend, Clamp Bore cap etc.) which required for installation of Submersible pump. |
| 9 | Lowering of 7.5 KW Submersible pump alongwith the flat cable laying and all other required work for the lowering of pump/motor. |
| 10 | Earthing with G.I. pipe 4.5 meter long, 40 mm dia including accessories and providing masonary encloser with CI cover plate having locking arrangement and watering pipe etc. with chorcoal, coke and salt as required. |
| 11 | Providing and fixing of 6 SWG GI wire on surface /recess for loop earthing alongwith existing surface/recessed conduit/ submain wiring/cable as required |
| 12 | Steel work welded in built up section/ framed work, includingcutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Earth work in excavation by machenical means (Hydraulic excavator)/ mannual means in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out of the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 14 | Providing and laying cement concrete in retaining walls. Return walls, walls (any thickness) including attached pilasters, columns, piers abutments, pillars posts, struts, buttresses, string or lacing courses parapets, coping, bed blocks, anchor blocks, plain window sills, fillets sunken floor etc, upto floor five level, excluding the cost of centering, shuttering and finishing: 1:1.5:3 (1 cement : 1.5 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in foundation and plinth in: |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | 1:04:08 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 18 | 15 mm Cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement : 4 fine sand) |
| 19 | Finishing walls with water profing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10sqm |
