Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-10-2025 | Corrigendum 2 | Date | 23-10-2025 |
| 2 | 09-10-2025 | Corrigendum 1 | Technical Bid | 13-10-2025 |
| Sl. No. | Item Description |
| 1 | KOVVUR MUNICIPALITY |
| 2 | Construction ofRaw Water Intake Well in River Godavari down stream side of 4th bridge |
| 3 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths a) Up to 2.00m depth |
| 4 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths b) 2.00m to 4.00m depth |
| 5 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths c) 4.00m to 6.00m depth |
| 6 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths d) 6.00m to 8.00m depth |
| 7 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths e) 8.00m to 10.00m depth |
| 8 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths f) 10.00m to 12.85m depth |
| 9 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths g) 12.85.00m to 13.85m depth |
| 10 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths h) 13.85m to 14.85m depth |
| 11 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths i) 14.85m to 15.85m depth |
| 12 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths j) 15.85m to 16.85m depth |
| 13 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths k) 16.85m to 17.85m depth |
| 14 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths l) 17.85m to 18.85m depth |
| 15 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths m) 18.85m to 19.85m depth |
| 16 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths n) 19.85m to 20.85m depth |
| 17 | Well sinking for construction of 8.0m dia Raw Water Intake well in sandy and other loose soils under water either by manual sinkers andlabour, divers, or dredgers, weighing the top of steining to assist sinking etc.,. This rateincluding cost of all labour charges,dewatering, hiring of machinery, fuel charges, wages of driver ,transportaions of machinary andother incidental charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. For the following the depths o) 20.85m to 21.70m depth |
| 18 | Providing C.C.mix (M15 grade) for well bottam Plugging from approved quarries by using 20mm graded HBG machine crushed metal. This rateincluding cost & conveyance of all materials,all labour charges for machine mixing, laying, vibrating, centering, tamping delifting upto 26 mts depth under water and curing including all delifts other incidental chargesetc., complete as per S.S and as directed by the departmental officer in charges of work. For 8..00m dia Intake well |
| 19 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, seaffolding laying concrete, vibrating, curing etc. complete with all de-lift for 8.00mm dia intake wall in river godavari charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work as follows a) for Base slab & Plugging |
| 20 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work b) for Well Curb0.30m thick |
| 21 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work c) for Side walls (Well Steining)(Side Wallof the Well of 0.75m thick upto Normal water level+0.50m +19.70m(-)+0.00m) |
| 22 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work c) for Side walls (Well Steining) Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.70m to +19.70m=3.00m |
| 23 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work c) for Side walls (Well Steining) Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 23.70m to +22.70m=1.00m |
| 24 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work c) for Side walls (Well Steining) Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 24.70m to +23.70m=1.00m |
| 25 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work c) for Side walls (Well Steining) Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 25.685m to +24.70m=0.985m |
| 26 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry. including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)and as directed the departmental officer in charge of work platform for placing Sluice Valves |
| 27 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, Seaffolding, other incidental charges laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work as follows a) for Pump house Columns |
| 28 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work b) for floor beams |
| 29 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work c) for Floor Slab 0.30m thick with allrouns walk way |
| 30 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work d) ring Beams at lintel level |
| 31 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work e) for Roof Beams |
| 32 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work f) for Roof slab 0.15m thick with slab extension 0.30m |
| 33 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work g) for Sunshade |
| 34 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, seaffolding other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work.For Construction of Pumphouse. Suerstructure. |
| 35 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, seaffolding other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work.For Construction of Pumphouse. parapet wall and supporting pilled |
| 36 | Supply and fixing of 50mm thick pre-cast Cement Jollys of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.Sand as directed by the departmental officer in charge of work for pump house |
| 37 | Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing scaffolding, lifting, smooth,finishing,other incidental charges etc., complete as per S.S as per ss and as directed by the departmental officer in charge of work. For the Pump house inside.and outside |
| 38 | Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing scafoolding, lifting, smooth,finishing,other incidental charges etc., complete as per S.S as per ss and as directed by the departmental officer in charge of work. For the Pump house inside.paropet wall and supporting pillers |
| 39 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, including conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of workfor pumphouse |
| 40 | Plastering with CM (1:3) 12mm thick for ceiling including cost and conveyance of all materials at site,and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,smooth finishings etc., complete as per S.S and as directed by the departmental departmental officer incharge of work. For pump house ceiling |
| 41 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials all labour charges,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work. For Pump house |
| 42 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing, transportation , site finish,fabrication anderection charges, and other incidental charge etc., complete as per ss and as directed by the departmental officer in charge of work.for pumphouse windows |
| 43 | Painting two coats with synthetic enamel paint1st quality over a base coat of red oxide. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges lifting,cost ofbrushes, other incidental charges etc., complete as directed by the departmental authorities (APDSS No:1201) For Rolling shuttering in pump house. |
| 44 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 and other incidental charges etc., complete as directed by the departmental offincer incharge of work |
| 45 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.35 mts x 1.20 mts as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame other incidental charge and etc. completed for finished item of work |
| 46 | Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection hire charges of machine, sitewelding charges, and other incidental charge etc.,complete etc.,complete as directed by the departmental authorities.For well curb. |
| 47 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 48 | Supply and delivery of350mm diaPN 1.6 \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865,IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including and transportation. PN1.6. other incidental charges as per ss and as dirceted by the departmental officer in charge of work. |
| 49 | Labour charges for lowering and keeping in position of 350mm diaD.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. This rate including cost of all labour charges , cost of bolts , nuts.rubber packing ,and other incidental charge s etc., completeper ss and asdirected by the departmental officer in charge of work. |
| 50 | Centrifugally cast (Spun) Ductile Iron 350mm dia 2.00 m long DI D/Fpressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating, including transportationother incidental charge etc., completeper ss and asdirected by the departmental officer in charge of work. |
| 51 | Supply and delivery of Centrifugally cast (spun) up to 350mm diaDuctile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) including Transportation and . as directed by the departmental officer incharge of work. |
| 52 | Lowering the 350mm dia D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,conveyance from source of supply as per BIS No.3114/94.This rate including all labour charges hiring of machinary , fuel charges andother incidental chargeas per ss and asdirected by the departmental officer in charge of work |
| 53 | Jointing the 350 mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 and as directed by the departmental officer in charge of work. |
| 54 | Supply and delivery ss 304 gradeoperating handle with rod & wheel for operatn at site of work ion of D.I. Sluice valve inside the intake well as per the actuals and this rate including cost of ss 304 , fabrication charges, erection at site of work cost of welding charges and other incidental charges etc., complete as per ss and as directed by the departmental officer in charge of work. |
| 55 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,complete as per ss and as direceted by the departmental officer incharge of work |
| 56 | Supply and delivery ss 304 gradeoperating Steel Ladder inside the intake well as per the actuals and this rate including cost of ss 304 , fabrication charges, erection at site of work cost of welding charges and other incidental charges etc., complete as per ss and as directed by the departmental officer in charge of work. |
| 57 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages complete with as per approved makes as per IE Rules and as directedby the departmental officer incharge of work |
| 58 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages complete as per IE Rules and approved makes and as directedby the departmental officer incharge of work |
| 59 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building complete as per IE Rules and as directedby the departmental officer incharge of work |
| 60 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges complete and approved makes as per IE Rules and as directedby the departmental officer incharge of work |
| 61 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges complete as per IE Rules and as per approved brands as directedby the departmental officer incharge of work |
| 62 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges cost of materials, other incidental charges etc complete as per apprved brand and as directed by the departmental officer incharge of work. |
| 63 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges cost of all aterials other incidetal charge etc.,complete as per IE Rules and as directedby the departmental officer incharge of work |
| 64 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete as per IE Rules and as directedby the departmental officer incharge of work |
| 65 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete as per IE Rules approved brand and as directedby the departmental officer incharge of work |
| 66 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 67 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 68 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT complete as per IE Rules and as directedby the departmental officer incharge of work |
| 69 | Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj. complete as per IE Rules and as directedby the departmental officer incharge of work |
| 70 | Providing temporory Island for preparation platform for sinking of Intake well of 20m dia island and 6.50m height |
| 71 | Providing and construction of Temporary island of 20.00m. Diameter and 11 metres height for preparation of platform etc.with laying of sand bags in the stipulated places including cost of empty cement bag, sand thread, stiching charges and labourcharges . During theemergency conditions such as floods .and other natural calamities, the above rate is allowed to enhance by 25% for1st warning level and above, keeping in view of the difficulty in availability of labour and vehicles for ring bundby using crane with grap, consumbles, wooden ballies shutable dia and shutable height andbraceings, forconstruction of 8.00m dia Raw water intake well in River in Godavari near Bridge. This rate including cost of all materials,all labour charges conveyance charges and all operational, incidental and labour charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. |
| 72 | Formation of bund/approach ramp for Temporary Islandwith Gravel from approved quarry including cost of gravel and conveyance of all materials and labour charges for formation of filling, raming,sectining,including supporting the sides for water flow etc., Complegte for approch ram from bund to intake well at bridge to Godavari river .This rate including cost of all materials,all labour charges conveyance charges and all operational,other incidental and labour charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. |
| 73 | Construction of ApprochBridgefor Intake well in Godavari River |
| 74 | Earthwork in excavation for Bridge as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and as directed by the departmental officer in charge of work. Service Bridge as follows - Manual Means upto 3 metres depth in ordinary soil |
| 75 | Earthwork in excavation for Bridge as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and as directed by the departmental officer in charge of work. Service Bridge as follows - Mechanical Means above 3 metres depth in Ordinary Soil |
| 76 | Filling Sand for foundation for service bridgeas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work for column footing |
| 77 | Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm size hard, machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and complete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402)for Piles caps bed |
| 78 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as, machine mixing, laying concrete, seaffolding, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work as follows. For pile concrete. (For Footings) |
| 79 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work. For pile concrete. (For Columns) |
| 80 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work. For pile concrete. (For Carriage Slab Beams) |
| 81 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 usingMIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the departmental officer in charge of work. For pile concrete. (For Carriage Slab 0.30m thick) |
| 82 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. This rate including cost ofmaterial, all lanbour charges, scaffolding charge , vibrating, watering,centering, transporations, hand railin3stires as per approved secification includingHYSD bar reinforcement as par ss and as directed by the departmental officer in charge of work. |
| 83 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 84 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all ,conveyance charges of materials and other incidental charges, scaffolding, liftingall labour charges, cost of materials and as directed by the departmental officer in charge of work. For Pump house |
| 85 | Supply and erection of 2#of 29.84 Kw(40 HP) ofVT Pumpsets Each with a duty of 98 LPS and a total head of 21 m (one working and one stand bye) for pumping Raw water from intake well to Aerator of Proposed WTP |
| 86 | Supply and erection of 2#of 29.84 Kw(40 HP) ofVT Pumpsets Each with a duty of 98 LPS and a total head of 21 m (one working and one stand bye) for pumping Raw water from intake well to Aerator of Proposed WTP |
| 87 | Supply, delivery and erection of Raw Water Vertical Turbine Pump sets including all Suction, Delivery Connections, Panel Board etc., Complete Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Vertical Turbine Pumpsets 3 No Capable of Discharging 5340 LPM gainst a head of 20.00 Mts, with 50% standby and suitable capacity Vertical squirrel cage induction motor suitable for operation on 415 V +/- 10%, 50Hz +/- 5%, (Vertical solid shaft) of reputed make.(15% Overloading on BKW) including all taxes but excluding GST.Suitbale size Columns & Colum assembly length including bowl assemble, MOC for VT pump, Bell Mouth / Bowl CI - IS 210, Impeller / CF8M - Shafts - SS 410, Pipe / M tool - MS IS 2062 as approved by DepartmentSupply, delivery, erection and commissioning of control panel board with suitable capacity bus bar suitable to operate above 3 Nos of pump sets. The panel board is made of 16 gauge MS sheet metal cubical/industrial indoor type and duly painted with 2 coats of enamel paint. a. Incoming MCCB – 1 nob. FCMA Soft Starters.- 3 nosc. Shunt capacitor with MCB - 3 nosd. 315 A TPN SFU for starter o/g – 3 nosf. ASS – 1 noe. VSS – 1 nog. Ammeters for motors – 3 nosh. Spare TPN SFU – 1 noi. Phase indicating lamps – 3 nosj. ON/OFF push buttons with bulbs - 6nos Supply, delivery, erection and commissioning of Incoming Alluminium armoured cable from transformer to Control panel board. |
| 88 | Supply, delivery, erection and commissioning of alluminium armoured cable from panel board to starters and to motor.Supply and errection of suitable diamer and length 10 mm thick MS Manifold as approved by the Department (Dia should not be less than 1.5 times the dia of the pumping main)Supply and errection of suitable suction and delivery DI pipes and connections upto ManifoldCable Joints with jointing material such as lugs, glands, adhesive tapes etc to join the above cables.Supply, laying and fixing of 40 x 6 mm GI flat patti double earthing for electrical protection for motor, pump panel board efficiently earthing duly providing earth pits and filling with coal and salt and GI pipes 1 ½ x 6” long and bottom 2’ x 2’ GI plate welded as per IE rules and specifications with 1 ½ ‘ x 1 ½ ‘ earth pit chambers with brick masonary and top cover.Fire Extinguisher buckets and other safety measures accessoriesa. CO2 Fire extinguishers of 5 kgs each – 2 nosb. First aid kits – 2 nosc. 4 fire buckets with stand – 2 nos d. Rubber mats – 2 nose. Rubber hand gloves – 3 pairsf. Danger boards – 5 nos All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer |
| 89 | Providing 400mm dia. D.I. K9 Raw Water Pumping main from Intake well in Godavari Riverto Aerator of WTP (150m MS pipe+650m DI K9 pipe) |
| 90 | Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials including cost of all labour charges, hireing of machinery, fuil charges, wages of driver and other incidetal charges for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches. |
| 91 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and as directed by the departmental officer incharge of work For Pipe line trenches - Mechanical Means |
| 92 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and as directed by the departmental officer incharge of work For Pipe line trenches - Manual Means |
| 93 | Manufacture supply delivery,of 400mmdia k9ductile iron centrifugally cast (spun)pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00mfor classification k9 suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation to site ,loading,unloading, stackingetc complete other incidental chargeas per ss and asdirected by the departmental officer in charge of work for pumping main |
| 94 | Supply and delivery of Centrifugally cast (spun) up to 500mm diaDuctile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and . as directed by the departmental officer incharge of work. |
| 95 | Centrifugally cast (Spun) Ductile IronDI D/Fpressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating,including transportationother incidental charge etc., completeper ss and asdirected by the departmental officer in charge of work. (250mm dia. 2.00m. Long pipe for scours) |
| 96 | Centrifugally cast (Spun) Ductile IronDI D/Fpressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating,including transportationother incidental charge etc., completeper ss and asdirected by the departmental officer in charge of work. (400mm dia. 1.00m. Long pipe for sluice and non return valves and flow meter) |
| 97 | Centrifugally cast (Spun) Ductile IronDI D/Fpressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating,including transportationother incidental charge etc., completeper ss and asdirected by the departmental officer in charge of work. (400mm dia. 2.00m. Long pipe at intake well ) |
| 98 | Lowering the of 400mm dia , D.I. K9Pipes pumping main and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries. This rateincluding cost ofall labour charges, fixing of machinary fuil charges other incidental charge etc., complete and as per ss and asdirected by the departmental officer in charge of work. |
| 99 | Jointing the 400mm dia ,D.I. K9 Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 as per ss and asdirected by the departmental officer in charge of work. |
| 100 | Lowering theD.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,conveyance from source of supply as per BIS No.3114/94.This rate including all labour charges hiring of machinary , fuel charges andother incidental chargeas per ss and asdirected by the departmental officer in charge of work - 400mm DI Specials for pumping main |
| 101 | Lowering theD.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,conveyance from source of supply as per BIS No.3114/94.This rate including all labour charges hiring of machinary , fuel charges andother incidental chargeas per ss and asdirected by the departmental officer in charge of work - 250mm DI Specials for pumping main |
| 102 | Jointing theD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) - 400mm Dia |
| 103 | Jointing theD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) - 250mm Dia |
| 104 | Jointing theD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) - 100mm Dia |
| 105 | supply and delivery at work site 400mminternal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001 in suitable lengths painted with two coats of food grade epoxy paint inside and outside to suit the site conditions, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge including Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testingas per ss and as directed by the departmental officer incharge of work |
| 106 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865,IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including and transportation. PN1.6. as per ss and as dirceted by the departmental officer in charge of work - 400mm Ø DI D/F valve - PN16 |
| 107 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865,IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including and transportation. PN1.6. as per ss and as dirceted by the departmental officer in charge of work - 250mm Ø DI D/F valve - PN16 (for Scour) |
| 108 | Supply & Delivery of 100mm dia PN 16 on 400mm dia pipelines Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 PN 1.6 as per ss and as dirceted by the departmental officer in charge of work. |
| 109 | Supply, Delivery of 400mm dia PN 1.6 D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation pn 1.6 andas per ss and as dirceted by the departmental officer in charge of work. |
| 110 | Manufacture, Supply and delivery of 100mm dia PN 1.6 Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA,form factory to site of work.This rate including cost of all materialtransit risk , other incidental charges as per ss and directed by the departmental officer in charge of work. |
| 111 | Labour charges for lowering and keeping in position of 400mm dia D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. This rate including cost of all labour charges , cost of bolts , nuts.rubber packing ,and other incidental charge s etc., completeper ss and asdirected by the departmental officer in charge of work - 400mm dia |
| 112 | Labour charges for lowering and keeping in position of 250mm dia D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. This rate including cost of all labour charges , cost of bolts , nuts.rubber packing ,and other incidental charge s etc., completeper ss and asdirected by the departmental officer in charge of work - 250mm dia |
| 113 | Labour charges for fixing Kinetic Air Valves 100mm dia PN 1.6 with isolating Sluice valves, Double Air valves/ Air Cushion valve including cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. other incidental cghargesetc., complete as per ss and as directed by the departmental officer in charge of work. |
| 114 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and includingon all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curingscaffolding , shuttering, centering etc complete but excluding cost of steel and its fabrication charges for finished item of work,as per ss and as directed by the departmental officer in charge of work.for thrust blocks |
| 115 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and includingon all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing scaffolding , shuttering, centering etc complete but excluding cost of steel and its fabrication charges for finished item of work,as per ss and as directed by the departmental officer in charge of work.for Anchor blocks |
| 116 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 117 | Construction Valve Chambers above 350mm dia Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 118 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 119 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 120 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete centering, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Bottom Slab |
| 121 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete curing centering, seaffolding other incidental charges etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Side walls all round |
| 122 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering, seaffolding etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 123 | Providing High Yield Strength Deformed (HYSD)/Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works,including labour charges for straightening, cutting,bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG,forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps,couplings,chairs,spacer bars including cost and conveyance of binding wire,cover blocks and all incidental,operational,labour charges such as cutting, bending, placing in position,tying i etc.,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts |
| 124 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 125 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 126 | Supply, delivery of 400mm dia Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIwith 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make. This rate including cost of materials all labour charges transporation charges other incidental charge etc complete as directed by the departmental officer incharge of work. |
| 127 | Supply,delivery of 400mm dia strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete as per ss and as directed by the departmental officer incharge of work |
| 128 | Manufacture, Supply and delivery of 400mmMS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. Thise rates is including cost of materials, transportation charges, other incidental charges etc completeas per ss and asdirected by the departmental officer in charge of work |
| 129 | Construction of8.00 MLD Rapid Gravity Filtration plant |
| 130 | Construction of 8 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using sand as filter media, compatible with SCADA arrangements, duly following relevant IS codes in the design of plant components including trial running for 90 days etc., including chlorine contact tank & consumables etc., complete. |
| 131 | a) For Intermediate Capacities proportional rates may be adoptedb) The above rates are arrived with base rate of Cement Rs.4220/- per MT and steel Rs.59000 /-f(i) For SBC below 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 10% on basic rate.ii) For SBC below 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 15% on basic rate. g) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition.h) For components immersed in water Stain less Steel of Grade 304L shall be used. For other components 304 Grade steel shall be used. i) Lab testing equipment of reputed make and consumables for one year. The testing equipment for conducting all laboratory tests shall be installed & training shall be imparted to the Municipal staff. The above rates of Filtration Plants shall include all the following components. |
| 132 | A) Civil Works,(All works of VRCC Shall be in M30 design mix),1). Stilling Chamber and Aeration cascade,3). Raw water channel with Stainless Steel Weir of SS 304 L Grade material and also with digital flow meters,4) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS Blades with gear wheel arrangements etc, using 304 L Grade Steel.,5-a) Clariflocculator / Flocculation tanks with the components of central driven circular clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 Ltubes /angular for durability & chemical resistant with wheel arrangements etc,,6) Filter house, Chemical house, Alum store, Laboratory room, Chlorination plant room, toilet etc. (All structures shall be provided RCC roof only).Chemical house & Chlorinator rooms are to be isolated and shall be as per CPHEEO manual.7) Wash water tank of suitable capacity shall be constructed at minimum clearance of 2.00m, above the roof slab of Filter beds / any other structure, and the minimum residual head at the top of under drain system shall not be less than 8.0 meters.,8) Chlorine contact tank,9) All the Doors and Windows shall be of Best Teak wood/Aluminum / UPVC make, except entrance door. The entrance door including shutter in filter house shall be with best teak wood of minimum size of 2.40 X 2.40 mts.,a) Main Doors of all individual Buildings shall be made of Best Teak woodb) Other Internal Doors of the buildings shall be of Compressed wood/ Aluminum/ UPVC materials.,c) Ventilators shall be provided for each building/structure of suitable size as per NBC standards.,10) a) All pipes in Plant shall be of D.I., D/F materials. All Connecting pipes of the plant components such as from Flash mixer to Clariflocculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I., D/F material. The size of sludge disposal pipe shall be minimum of 450 mm dia. with D.I D/F pipe and minimum length of 100 meters.,b) All the Valves in Plant shall be heavy duty and as per the specification of SoR,item No.30,11) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be,sufficiently spaced for easy operation & maintenance and inspection, as per standard norms.,12) The bottom level of the wash water control chamber must be above G.L so as to dispose the wash water and sludge from Clariflocculator by gravity to disposal point. |
| 133 | Additional specifications,13) Railing for all the components (Clariflocculator, Filter House, Staircase etc,.) shallbe provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia.,pipe for top horizotals,25mm dia. for middle row and 40mm dia. verticals spaced atinterval of not more than 1.00m c/c.,14) Inspection / Path ways in filter beds: Middle pathway: Minimum of 1.50m,Side pathway: Minimum of 1.20m,15)i) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room,Laboratory) shall be provided with Non-skid ceramic tiles of approved make & quality,as per standard specifications.,ii) All water Channels such as inlet, outlet channels and chambers shall be providedwith tiles.,16) The basement of the Filtration plant building shall be minimum of 1.20m and pipegallery shall be minimum 0.3m above the existing nearby Road top level.,17) Minimum head room of 2.00m shall be provided, at the alum mixing chambers inalum store for inspection & maintenance.,18) The minimum width of entrance hall for the Filter House shall be 4.50m, andLaboratory of min size of 3.30 X 4.50m. |
| 134 | 18) b) For various components of the WTP should be designed by considering theuplift pressure also.19) a) High efficient Air Blowers shall be installed to the design requirement with lownoise pollution, environmental pollution as per PCB guide lines & Testing of blowersas per I.S Standards at site. b) The Piping from Blower to Filter Beds shall be GIand submerged pipe in water shall be HDPE.,20) UPVC pipes shall be provided for under drain system. Filter pipe manifolds shallbe assembled with HDPE pipes.,21) Alum storage capacity shall be designed for minimum period of 90 days.Consumables shall be provided for 2115 Running Hours of WTP.,22) Chlorinator : Vacuum type chlorinator shall be provided with followingspecifications:,a) Vacuum operated solution feeding type Vacuum Regulator, Rotameter, Rate settingValve, built-in NRV, Gas Overflow out let by man folding to mount the system withthe unit.b) The unit shall consist of Ejector with necessary accessories such as Check Valve,Drain Valve and Vacuum relief Valves - for control of chlorinator dosage.c) The Accessories and manifolds shall be chlorine resistant and made of carbon steelseam less pipes, copper tube with brass fittings of suitable size & dimensions, withdiaphragm sealed chlorine pressure gauge arrangementsd) Water Booster Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, withHead ranging from 16 to 35 m,e) The water & solution carrying pipes shall be made of UPVC material of suitable sizeincl. all specials such as Tee\"s , Bends, couplings & NRVs and also Pressure Gauges ofsuitable range.f) Chlorine Gas Leak detector with alarm indicator.The installation includes all necessary accessories, civil and mechanical works,manifold header installations, injector fixing, connection with UPVC pipes, solutionpiping’s, fixing of motors as per standard specifications and commissioning ofChlorination Plant to the required demand, with a defect liability period of 1 year.The chlorinator of may be of any reputed make or any make of Metito/Toshocow-JescoSiemens Industrial Devices.,g) Life breathing apparatus.,h) Chlorine escape BA set,i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator- For Post Chlorination |
| 135 | B) Mechanical Equipment.1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical.resistance. (Alum tanks must be bound with corrosion resistant material (HDPE Lining,. Bitumen Coating, tiles etc) 2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical resistance..3) Filtration plant equipment instrumentation and piping..4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge arrangement etc.,..5) Pneumatic tyre wheel shall be provided for the bridge Clariflocculator..6) Wash water tank fittings and pump sets with 100% stand by..7) Air blower with motor of 100% stand by and pipe connections made with of SS pipes confirming to SS 304 Grade, in filter bed region..8) Chlorination equipment and pipe connections with chlorinator of 100% standby..9) Spares & Tools for 2 years..10) Gaseous Chlorination with cylinders has to be provided with protection measures.C) Electrical Equipment.1) Necessary power supply wiring to motors and switches bus bar connections as perIE Rules.2) Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc..3) Erecting mechanical and electrical equipment, trial run for 90 days at 23.50 hours.per day testing the treated water as per CPHEEO standards and maintenance of records.and imparting training to staff..4) Supply of 6 - Sets of completion plans and maintenance manual and brochures..5) All cables shall be of copper material, Cable ducts shall be covered with MS / Aluminum cheque plate..6) Min LUX levels inside the treatment plant shall be maintained..7) Yard lighting shall be provided as per norms.D ) Equipment for Flow measurements.1) Equipment for measuring Conductivity, Turbidity, Ph value, Residual Chlorine with recording & data storage facility (Computer based) & Alarm by SMS or other methods..2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water &Clear water flows by installing Digital Flow meters to measure the flows at Raw water Channel and at each filter bed individually and combined for measuring the quantities of water treated with a facility to record and store the readings & also to sendmessages to the assigned designators about the variations/ deficiencies in the flow including alerts for back wash requirements of filter beds, and recovery of data for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make. The equipment shall have the following specifications. |
| 136 | Hardware:,i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter bed out lets with accessories consists of,ii) Electrode Type: General type, Scraper type or replaceable type Electrode made with material of SS external Ultra Touch Sensors as per requirement.,iii) Customized Application Requirement : Sensors with Interface logic control board with serial interfaces, including accessories such as Add-on port, external DC Power Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash IndicationButton and memory of Data Storage for 30Days , status of Filter Bed Level indicator, Rating, Reading on LCB Display, Menu Driven Data for sending to Onsite Big Display, operated with Battery Power of any reputed make or any equivalent make.,iv) Customized Application Requirement: Power Sensors Interface logic control board with support 8 Power Sensing tags, Central System Interfacing Communication, On - board analog to Digit Convert Integrate Circuit of any reputed make or any equivalent make.v) Customized Application Requirement: Centralized System with two serial interfaces, 3 No’s of Add-On ports, One external DC Power Socket, On - BoardBuffer, On - Board Timer, On - Board RS485 Communication, On - Board RS 232 Communication, On - Board GPRS/GSM Module, On - Board Voice Chip, On - Board,Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display onLCD Display, Menu Driven, Menu Navigate Keypad, sending data to the Web Server, Communication with GPRS , operated with Battery Power of any reputed make or any equivalent make. |
| 137 | Software:,The software shall be designed with Web Domain with Data Base Server and WebName as per the directions of the Departmental Authorities.The application of Software for Web design & Desktop shall meet the followingrequirements:i)Onsite Display: Letters with size of 1.5’ seven Segment LED Display with Interfacefor each Filter Bed, for Onsite Display, by displaying the Bed Levels, Ratings,Readings in 3 Columns, for each bed of the plant in successive rows and cumulativeresults at the bottom of the screen.,ii) Off Site Display: Letters with size of 1.5’ seven Segment LED Display withInterface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating,,Total Cumulative Reading as specified on On-site Display Features.The system shall have also the features of Onsite Bed Wash Voice Precautions for BedLevels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low LevelTriggering, before & after Bed wash.The software shall also have the features of sending messages to the mobiles of theDepartmental designators indicating Bed Low Levels, Power Supply timings, BedWash timings and its status, Power Supply timings and its status Grid View Table,Motor Working time and its status Grid View Table, all trigger events and scheduleinformation and including all Snap View Reports, all Daily, Monthly, Yearly Reports,all Power Working Reports, all Power Events Information etc,. |
| 138 | Supply and delivery of 300mm dia DI D/F 2.00m length Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work as follows - 300 mm dia DI DF pipes from WTP to clear water sump (2.00m length) |
| 139 | Supply and delivery of 300mm dia 1.00m lengh DI D/f Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work as follows - 300 mm dia DI DF pipes from WTP to clear water sump (1.00m length) |
| 140 | Supply and delivery of Centrifugally cast (spun) upto 500mm dia Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation andas per ss and as directed by the departmental officer incharge of work. |
| 141 | Supply and delivery of 300 MM DIA PN 1.6 \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation PN1.6 Mpa - other incidental charges etc complete as directed by the departmental officer incharges of work. |
| 142 | Labour charges for lowering and keeping in position of 300mm dia PN 1.6C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 143 | Lowering the 300MM D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) |
| 144 | Jointing the 300 MM DIA D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) |
| 145 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trench |
| 146 | Construction Valve Chambers above 350mm dia Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 147 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 148 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water centering etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 149 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering, seaffolding charge etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Bottom Slab |
| 150 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering seaffolding etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Side walls allround |
| 151 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering seaffolding etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 152 | Providing High Yield Strength Deformed (HYSD)/Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works,including labour charges for straightening, cutting,bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG,forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps,couplings,chairs,spacer bars including cost and conveyance of binding wire,cover blocks and all incidental,operational,labour charges such as cutting, bending, placing in position,tying i etc.,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culvertsvalve chamber |
| 153 | Construction of Pre Settling Tank of 345 KL capacity near water treatent plant |
| 154 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth - Mechanical Means |
| 155 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth - Manual Means |
| 156 | Filling Sand for foundation of PRE SETTLING TANKas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 157 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for PRE SETTLINK TANK |
| 158 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing steel centering, seaffolding charges etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work as follows - Raft |
| 159 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - Side walls |
| 160 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - Central shaft, 8pill channel |
| 161 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - Walk Way Slab- 150mm thick slab |
| 162 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 163 | Supply and delivery and fixing in position Stainless Steel Hand Railing with SS 304 Grade of any design including all fabrication and all fixing charges welding charges fabrication charges and other incidental charges etc compalete as per ss and as directed by the dept authorities |
| 164 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 165 | Manufacture supply delivery,of 400mm dia K9 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading,transmit risk stacking, etc complete and as directed by the departmental officer in charge of work. |
| 166 | Manufacture supply delivery,of 400mm dia K7 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading,transmit risk stacking, etc complete and as directed by the departmental officer in charge of work for disposal of sludge. |
| 167 | Lowering of 400mm dia DI k9 D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries and other incidental charges as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental officer in charge of work for raw water |
| 168 | Jointing of 400MM DIA D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure including cost of jointing material Gasket, all labour charges other incedintal charges etc., complete as per BISNo.3114/85 and as directed by the departmental officer in charge of work. |
| 169 | Supply and delivery of 400mmdia DI K9 1.00m long Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are , including transportion andtransportation ,loading,unloading,transmit risk stacking, etc complete and as directed by the departmental officer in charge of work |
| 170 | Lowering the 400 mm dia, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,and other incidental charges etc complete as per ss andas directed by the departmental officer in charge of work. |
| 171 | Jointing the 400mm D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work( BIS No.3114/85) |
| 172 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings up to 500mm dia of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation . etc., complete as per ss andas directed by the departmental officer incharge of work. |
| 173 | Supply and delivery of 400MM dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work |
| 174 | Construction Valve ChambersSluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 175 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 176 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 177 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Bottom Slab |
| 178 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Side walls allround |
| 179 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing centering etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 180 | Construction of R.C.C. thrust blocks using RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, centering shuterig seaffolding curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, |
| 181 | Providing High Yield Strength Deformed (HYSD)/Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works,including labour charges for straightening, cutting,bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG,forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps,couplings,chairs,spacer bars including cost and conveyance of binding wire,cover blocks and all incidental,operational,labour charges such as cutting, bending, placing in position,tying i etc.,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 182 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.complete as per ss and as directed by the departmental officer incharge of work |
| 183 | Construction of clear watersump atWTP |
| 184 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthas per ss as directed by the departmental officer in-charge of work - Mechanical means |
| 185 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--Mechanical means 3 to 6 metres depth in ordinary soils - Mechanical means |
| 186 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--Manual means 3 to 6 metres depth in ordinary soils |
| 187 | Filling Sand for foundation for sumpas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 188 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixerincluding cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing for finished item of work as per SS and as directed by the departmental officer incharge of work. for bed concrete.of sump |
| 189 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - Raft |
| 190 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For side walls circular 0.30m thick below GL |
| 191 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For side walls circular 0.30m thick above GL |
| 192 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For Columns |
| 193 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For Roof Beams |
| 194 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For Roof slab0.15m thick |
| 195 | Supply and placing of the Design mix M30 concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andon all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing and other incidental charges complete as per ss and as directed by the departmental officer in charge of work as follows - For Roof dome slab 0.15m thick |
| 196 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 197 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work. |
| 198 | Supply and delivery and fixing in position M S ladder and manhole cover grill of any design including all fabrication and all fixing charges and other incidental charges power charges welding rod other incidental charges etc complete as per ss and as directed by the dept authorities |
| 199 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 200 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. This rate including cost ofmaterial, all lanbour charges, scaffolding charge , vibrating, watering, hand railin3stires includingHYSD bar reinforcement as par ss and as directed by the departmental officer in charge of work. |
| 201 | Construction ofpump house for clear water pumps and motors at proposed WTP |
| 202 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-Mechanical Means |
| 203 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-Manual Means |
| 204 | Filling Sand for foundation for pump houseas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 205 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixerincluding cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing for finished item of work as per SS and as directed by the departmental officer incharge of work. |
| 206 | Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing centering etc., complete as per ss directed by the departmental officer incharge of work for flooring and ramp |
| 207 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Column footings |
| 208 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Pedestals |
| 209 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Columns |
| 210 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Plinth beam |
| 211 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Lintel beams |
| 212 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Roof Beams |
| 213 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Roof slab0.125m thick, |
| 214 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcfor Sunshades |
| 215 | Brick work in CM 1:6 mix using 2nd class ordinary clay bricks as per table of IS 1077-1992 Non-Modularof traditional size 23x11x7cm brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days scaffolding charges, lifting charges, other incidental charge etc., complete and as per ss and as directed by the departmental officer in charge of work.As follows - Ground Floor |
| 216 | Brick work in CM 1:6 mix using 2nd class ordinary clay bricks as per table of IS 1077-1992 Non-Modularof traditional size 23x11x7cm brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days scaffolding charges, lifting charges, other incidental charge etc., complete and as First Floor peropet wall |
| 217 | Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.Sas per ss and as directed by the departmental officer in charge of work - Ground Floor |
| 218 | Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.Sas per ss and as directed by the departmental officer in charge of work - First Floor |
| 219 | Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.Sas per ss and as directed by the departmental officer in charge of work for ceiling |
| 220 | Plastering with CM (1:3) 20mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.Sas per ss and as directed by the departmental officer in charge of work flooring |
| 221 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 222 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 and other incidental charges etc., complete as directed by the departmental offincer incharge of work |
| 223 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows AS SIZE 1.50m X 1.20m as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame other incidental charge and etc. completed for finished item of work |
| 224 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 225 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges and other incidental charges power charges welding rod etc complete as per ss and as directed by the dept authorities |
| 226 | Painting two coats with synthetic enamel paint1st quality over a base coat of red oxide. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges lifting,cost ofbrushes, other incidental charges etc., complete as directed by the departmental authorities (APDSS No:1201) For Rolling shuttering in pump house. |
| 227 | Supply and fixing of 50mm thick pre-cast Cement Jollys of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.Sand as directed by the departmental officer in charge of work. |
| 228 | Manufacture, Supply and Delivery of 110mm dia 6 kg/cm Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP in cluding all taxes. - 110 mm dia.This rate including cost of material , all labour charges,necessary fixing, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 229 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages complete as per IE Rules and as directed by the departmental officer incharge of work |
| 230 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chagescomplete as per IE Rules and as directed by the departmental officer incharge of work |
| 231 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building as per IE Rules and as directed by the departmental officer incharge of work |
| 232 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges complete as per IE Rules and as directed by the departmental officer incharge of work |
| 233 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour chargescomplete as per IE Rules and as directed by the departmental officer incharge of work |
| 234 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. complete as per IE Rules and as directed by the departmental officer incharge of work |
| 235 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work |
| 236 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc completecomplete as per IE Rules and as directed by the departmental officer incharge of work |
| 237 | S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going complete as per IE Rules and as directed by the departmental officer incharge of work |
| 238 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 239 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 240 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT complete as per IE Rules and as directedby the departmental officer incharge of work |
| 241 | Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.complete as per IE Rules and as directedby the departmental officer incharge of work |
| 242 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,complete as per ss and as direceted by the departmental officer incharge of work |
| 243 | Supply and erection of 3# X 26.11 KW of CF Pumpsets Each with a duty of 50 LPS and a total head of 38m ( Two simultaneous working ane stand bye) to various proposed and existing ELSRs |
| 244 | Supply and erection of 3# CF Pumpsets Each with a duty of 50 LPS and a total head of 38m ( Two simultaneous working ane stand bye) to various proposed and existing ELSRs |
| 245 | Supply, delivery and erection of 3# of 26.11Kwelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 35 LPS at total head of 38.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work.. |
| 246 | Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc. |
| 247 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., (Mandatory if required) All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 248 | Construction wash water recirculationsump atWTP |
| 249 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth_ Mechanical means up to 3 metres depth in ordinary soils |
| 250 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth_ Mechanical means 3 to 6 metres depth in ordinary soils |
| 251 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth_ Manual means 3 to 6 metres depth in ordinary soils |
| 252 | Filling Sand for foundation for recirculation sump houseas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 253 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for recirculation sump |
| 254 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - Raft |
| 255 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For side walls circular 0.30m thick below GL |
| 256 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For side walls circular 0.30m thick above GL |
| 257 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For Columns |
| 258 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For Roof beams |
| 259 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For Roof slab0.15m thick |
| 260 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including, all materials including all operational ,incidental and labour charges such as,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc., complete and as per ss and as directed by the departmental officer in charge of work - For Roof dome slab 0.15m thick |
| 261 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, including conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete as per ss and as directed by the departmntal officer in charge of work. |
| 262 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 263 | Supply and delivery and fixing in position M S ladder and manhole cover of any design including all fabrication and all fixing charges and other incidental charges power charges welding rod etc complete as per ss and as directed by the dept authorities |
| 264 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 265 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. This rate including cost ofmaterial, all lanbour charges, scaffolding charge , vibrating, watering, hand railin3stires includingHYSD bar reinforcement as par ss and as directed by the departmental officer in charge of work. |
| 266 | Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator |
| 267 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches - Mechanical Means |
| 268 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches - Manual Means |
| 269 | Manufacture supply delivery,of 100mm dia K9 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading,transmit risk stacking, etc complete and as directed by the departmental officer in charge of work. |
| 270 | Supply and delivery of 100mmdia DI K9 1.00m long Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are , including transportion andtransportation ,loading,unloading,transmit risk stacking, etc complete and as directed by the departmental officer in charge of work |
| 271 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings up to 500mm dia of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation . etc., complete as per ss andas directed by the departmental officer incharge of work. |
| 272 | Lowering of 100mm dia DI k9 D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries and other incidental charges as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental officer in charge of work. |
| 273 | Jointing of 100mm dia D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure including cost of jointing material Gasket, all labour charges other incedintal charges etc., complete as per BISNo.3114/85 and as directed by the departmental officer in charge of work. |
| 274 | Supply and delivery of 100 mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work |
| 275 | Supply, Delivery of 100mm dia D.I Double Flanged Swing Check type Reflux valves 100mm dia PN1.6(Mpa) (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation etc., complete as per ss and as directed by the departmental officer in charge of work. |
| 276 | Labour charges for lowering and keeping in position of100mm dia DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges, other incidental charges etc complete and as directed by the departmental officer in charge of work. |
| 277 | Lowering the 500 mm dia, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,and other incidental charges etc complete as per ss andas directed by the departmental officer in charge of work. |
| 278 | Lowering the 100 mm dia, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,and other incidental charges etc complete as per ss andas directed by the departmental officer in charge of work. |
| 279 | Jointing of 500mm diatheD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work( BIS No.3114/85) - 500mm dia |
| 280 | Jointing of 250mm diatheD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work( BIS No.3114/85) - 250mm dia |
| 281 | Jointing of 100mm dia theD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work( BIS No.3114/85) - 100mm dia |
| 282 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and includingon all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing scaffolding , shuttering etc complete but excluding cost of steel and its fabrication charges for finished item of work,as per ss and as directed by the departmental officer in charge of work.for thrust blocks |
| 283 | Construction Valve Chambers above 350mm dia Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 284 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 285 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 286 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Bottom Slab |
| 287 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Side walls allround |
| 288 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 289 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 290 | Manufacture, Supply and delivery of 100mmCI. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. Thise rates is including cost of materials, transportation charges, other incidental charges etc completeas per ss and asdirected by the departmental officer in charge of work |
| 291 | Supply and erection of 2# of 1.87KW(2.50HP) CF Pumpsets each with a duty of 12 LPS and a total head of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation |
| 292 | Supply and erection of 2# ofCF Pumpsets each with a duty of 7 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recurculation |
| 293 | Supply, delivery and erection of 2# of 1.87Kwelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 35 LPS at total head of 38.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work.. |
| 294 | Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc. |
| 295 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., (Mandatory if required) All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 296 | Construction of electrician / operator/watchmanquarters at HWW - 2 Nos |
| 297 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD - Mechanical means up to 3 metres depth in ordinary soil |
| 298 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD - Manual means up to 3 metres depth in ordinary soil |
| 299 | Filling Sandin foundation of the building as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH This rate including cost of material all labour charges etc complete and as per ss and as direacted by the departmental officer incharge of work. |
| 300 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixerincluding cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing for finished item of work as per SS and as directed by the departmental officer incharge of work. |
| 301 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. for Column Footings |
| 302 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. for Columns |
| 303 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. As follows for Plinth beam |
| 304 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. As follows for Lintel Beam |
| 305 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. As follows for Roof Beam |
| 306 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. As follows for Roof slab0.125m thick with 0.30m cxtension all sides |
| 307 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. for Sunshade |
| 308 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. for Loft slab 0.075m thick kitchen |
| 309 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work. |
| 310 | Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials at site,and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,smooth finishings etc., complete as per S.S and as directed by the departmental departmental officer incharge of work. out side & inside of the two quarters |
| 311 | Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing scafoolding, lifting, smooth,finishing,other incidental charges etc., complete as per S.S as per ss and as directed by the departmental officer in charge of work for walls out side & inside above 3.5 m Height |
| 312 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 313 | Supply and fixing of 50mm thick pre-cast Cement Jollys of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.Sand as directed by the departmental officer in charge of work. |
| 314 | Supply and fixing Aluminium Anodized Doors - Single Shutter of size 1.20 x2.10m as per approved drawing with aluminium anodized sections of Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 of specified thickness Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm of specified thickness and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, floor springs/ hydraulic door closure assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work - Door -D - 1.20X2.10 m |
| 315 | Supply and fixing Aluminium Anodized Doors - Single Shutter of size 1.00 x 2.10as per approved drawing with aluminium anodized sections of Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 of specified thickness Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm of specified thickness and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, floor springs/ hydraulic door closure assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work - doorsD1 -1.0X2.10m |
| 316 | Supply and fixing Aluminium Anodized Two/ Three Track Sliding Windows of size 1.20 x 1.20m as per approved drawing with aluminium anodized sections of Series C Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 317 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work.This rate including cost of material , all labour charges,necessary fixing, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 318 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work . This rate including cost of material , all labour charges,necessary fixing, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 319 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 320 | Cement plasteringusing opc in cm(1:3) prop 20 mmthickincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of work as per S.Sfor floorring |
| 321 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete.This rate including cost of material , all labour charges, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 322 | Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201) This rate including cost of material , all labour charges,necessary fixing, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 323 | Manufacture, Supply and Delivery of Unplasticised 110mm dia 6kg/cm PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP in cluding all taxes. - 110 mm dia.This rate including cost of material , all labour charges,necessary fixing, other incidental charge. etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 324 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories with approved brand and makesincluding masonary workall labour chagescomplete as per IE rules and as directed by the departmental officer incharge of work |
| 325 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box of approved brand including all labour chagescomplete as per IE rules and as directed by the departmental officer incharge of work |
| 326 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential buildingcomplete as per IE rules and as directed by the departmental officer incharge of work |
| 327 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board with approved brandsincluding all labour chargescomplete as per IE rules and as directed by the departmental officer incharge of work |
| 328 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsof with approved brands including all labour chargescomplete as per IE rules and as directed by the departmental officer incharge of work |
| 329 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe approved makes for earth continuity including all labour charges etc. complete as per IE rules and as directed by the departmental officer incharge of work |
| 330 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories with approved makes including all labour charges etc., complete as per IE rules and as directed by the departmental officer incharge of work |
| 331 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete complete as per IE rules and as directed by the departmental officer incharge of work |
| 332 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc. complete as per IE rules and as directed by the departmental officer incharge of work |
| 333 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 334 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 335 | Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.complete as per IE Rules and as directedby the departmental officer incharge of work |
| 336 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tankscomplete as per ss rules and as directed by the departmental officer incharge of work |
| 337 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete as per ss rules and as directed by the departmental officer incharge of work |
| 338 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges complete as per ss rules and as directed by the departmental officer incharge of work |
| 339 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.complete as per ss rules and as directed by the departmental officer incharge of work |
| 340 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)complete as per ss rules and as directed by the departmental officer incharge of work |
| 341 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brandcomplete as per ss rules and as directed by the departmental officer incharge of work |
| 342 | Labour charges for laying, fixing and commissioning the PVC pipes of 110mm dia including Supplying & fixing 76.2 mm W.I clamps/ couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicecomplete as per ss rules and as directed by the departmental officer incharge of work |
| 343 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kgcomplete as per ss rules and as directed by the departmental officer incharge of work |
| 344 | S& F GI pipe Medium Grade 25mm dia properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour chargescomplete as per ss rules and as directed by the departmental officer incharge of work - 25 mm dia nominal bore -from tank to jn forof individual lines |
| 345 | S& F GI pipe Medium Grade 20mm dia properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour chargescomplete as per ss rules and as directed by the departmental officer incharge of work - 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 346 | S& F GI pipe Medium Grade 15mm dia properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour chargescomplete as per ss rules and as directed by the departmental officer incharge of work - 15 mm dia nominal bore -for internal |
| 347 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size. This rate including cost of materials labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. |
| 348 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size. This rate including cost of materials labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. |
| 349 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size. This rate including cost of materials labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. |
| 350 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent. This rate including cost of materials labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. |
| 351 | S& F following GI union Ist Quality. This rate including cost of materials all labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. 12.70mm |
| 352 | S& F following GI union Ist Quality. This rate including cost of materials all labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. 19.05mm |
| 353 | S& F following GI union Ist Quality. This rate including cost of materials all labour charges, other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work. 25.40mm |
| 354 | For septic TankEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth by manual means upto 3.00m depth |
| 355 | Filling Sandin foundation of the building as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH This rate including cost of material all labour charges etc complete and as per ss and as direacted by the departmental officer incharge of work. |
| 356 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixerincluding cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing for finished item of work as per SS and as directed by the departmental officer incharge of work. |
| 357 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work. |
| 358 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of work as per S.S SS out side & inside and as directed by the departmental officer incharge of work. |
| 359 | RCC M-25 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for culvert slabs 150mmthick as directed by the departmental officer incharge of work. |
| 360 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.( APSS No.126) |
| 361 | Erection of 500 KVA Transformer atHead Water Works Kovvur with Transformer yard 15.00x12.00m |
| 362 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply. This rate including cost of all materials, and all labour charges other incidental charges etc complete as directed by the departmental officer incharge of work. |
| 363 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., as per IE Rules andas directed by the departmental officer incharge of work. |
| 364 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete as per IE Rules andas directed by the departmental officer incharge of work |
| 365 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure as per IE Rules. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 366 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 367 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 368 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 369 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 370 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. and as per the details given below: |
| 371 | A) Earth Electrodes |
| 372 | B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 |
| 373 | C) Epoxy insulators |
| 374 | D) No.\"8\" SWG Copper wire. MAT 04141 |
| 375 | Supply and erection of 500KVA, 11KV/433 V, DY-11 Vectro group, out door type, plinth mounting type, Hint /make transformer with bushings on HT side and cable entry box on L V side to received 1.1 KV grade cable with all standard accessories transformer oil. tansformer having copper wound natural cooled with all standard accessories . This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 376 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431 |
| 377 | MAIN PANEL, BOARD.LT Sheet steelclad, free standing, floor mounting unitized, Duat and vermin proof Indoor, Cubicle powder coated panel board made out of 16 SWG CRCA sheet sheetable for use 3 ph, 440v, 50 Hz. System and comprising, complete with busbars of adeeequate capacity, interconnections,control wiring etc..as required. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 378 | Incoming Supply, delivery transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work as follows |
| 379 | a) . 630A TPN SFU for main switch |
| 380 | b) . 630 A pole change over switch |
| 381 | c) one setMetering Panel Comprisinga). 1( 0-500V) 96mm.SQ.flush type Digital Voltmeter. |
| 382 | d) 3 way any off Voltmeter Selector Switch |
| 383 | e). ( 0-250A) 96mm SQ.flush type digital Ammeter |
| 384 | f). 3 way any off Ammeter Selector |
| 385 | g).3RYB Phase indication lamps with leds |
| 386 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 |
| 387 | Out-going Supply, delivery transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work as follows |
| 388 | 630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 389 | 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 390 | 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 391 | 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 392 | 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 393 | 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 394 | .KWH digital meter fro lighting section |
| 395 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879 |
| 396 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938 |
| 397 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 |
| 398 | 500KV.LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. This rate incluidng cost of materials, all labour charges, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 399 | Transformer Yard at proposed SS Tank |
| 400 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means |
| 401 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss and as directed by the departmental officer incharge of work. |
| 402 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing centering etc., complete as per SS and as directed by the departmental officer incharge of work. |
| 403 | Supply and placing of the 25 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materialsall operational ,incidental and labour charges such as ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing.This rate including cost of material , all labour charges, other incidental charge. etc.complete as per ss and as directed by the departmental officer in charge of work M25 design mix - column footings |
| 404 | Supply and placing of the 25 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materialsall operational ,incidental and labour charges such as ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing.This rate including cost of material , all labour charges, other incidental charge. etc.complete as per ss and as directed by the departmental officer in charge of work M25 design mix - Columns |
| 405 | Supply and placing of the 25 design mix concretecorresponding to IS -456 using /MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including,sales and other taxes on all materialsall operational ,incidental and labour charges such as ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing.This rate including cost of material , all labour charges, other incidental charge. etc.complete as per ss and as directed by the departmental officer in charge of work M25 design mix - Plinth beam |
| 406 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 407 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 408 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). |
| 409 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc completeThis rate including cost of material , all labour charges,fabrication charges , otherincidental charges etc., complete as per ss and as directed by the departmental officer in charge of work. |
| 410 | Painting two coats with synthetic enamel paint over a base coat of red led. The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges other incidentalcharges etc., complete as directed by the departmental officer in charges of work |
| 411 | supply and filling the transformer yard with 40mm HBG metal m/c.This rate including cost of metal,filling charges,Spreading,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 412 | Providing800mm dia.(10 mm thick plate) atNational High way at kovvur forRaw water pumping main 400 mm dia DIK9for NH crossings and clear water pumping main 150 mm dia RLY crossing |
| 413 | Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials including Manufacture, supply and delivery at work site 800mminternal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001 in suitable lengths painted with two coats of food grade epoxy paint inside and outside to suit the site conditions, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –chargeincluding Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing as per SS and as directed by the departmental officer incharge of work. |
| 414 | Construction of 600 mm sizeCC disposal drain from proposed WTP |
| 415 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD - Mechanical Means |
| 416 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD - Manual Means |
| 417 | Filling Sandfor foundation as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 418 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing centering charges , scaffolding charges, other incidental charge etc., complete.as per SS and as directed by the departmental officer incharge of work |
| 419 | Reinforced Cement Concrete M-15 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for CC drains bottom layer |
| 420 | Reinforced Cement Concrete M-15 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for CC drains side Walls |
| 421 | Construction of 600 KLELSR with 18m stagingat Achayamma Colonyzone -II |
| 422 | Construction of ELSR With the following specification600 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 423 | All concrete components shall be designed with M30 Design Mix proportion. The rate are arrived with base rate of cement Rs 4220/- per MT and steel Rs 600001. 1.The foundations shall be designed for solid raft; 2.Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.3.The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings.4.The above rates adopted for a wind pressure upto \"250 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5%5.The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones6.The basic rates shall be increased by 15% for Zone-III of seismic zones7.The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KL8.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 424 | i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:Above 1000KL threerows columns shall be provided a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm diaAll Manholes Frames & covers |
| 425 | b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Covers All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos. RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.RCC precast ladders of 0.60 m width - 2 Nos. RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 426 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 427 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 428 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adoptedStaff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 429 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 430 | Construction of 500 KLELSR with 18m stagingat Bridge peta zone -III |
| 431 | Construction of ELSR With the following specification500 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 432 | All concrete components shall be designed with M30 Design Mix proportion. The rate are arrived with base rate of cement Rs 4220/- per MT and steel Rs 600001. 1.The foundations shall be designed for solid raft; 2.Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.3.The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings.4.The above rates adopted for a wind pressure upto \"250 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5%5.The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones6.The basic rates shall be increased by 15% for Zone-III of seismic zones7.The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KL8.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 433 | i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:Above 1000KL threerows columns shall be provided a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm diaAll Manholes Frames & covers |
| 434 | b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Covers All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos. RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.RCC precast ladders of 0.60 m width - 2 Nos. RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 435 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 436 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 437 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adoptedStaff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 438 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 439 | Laying of 400mm,300 mm250mm and 200 mm dia . DI K9 Pumpingmains from clear water sump at HWW to Proposed and existing ELSRs |
| 440 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 441 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 442 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 443 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. as per ss and as directed by the departmental officer incharge of work as follows - Mechanical Means up to 3 metres depth in ordinary soil |
| 444 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. as per ss and as directed by the departmental officer incharge of work as follows - Manual means up to 3 metres depth in ordinary soil |
| 445 | Manufacture supply delivery,of 400mm dia centrifugally cast (spun) Ductile iron K9 pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as directed by the departmental officer incharge of work- 400mm dia |
| 446 | Manufacture supply delivery,of 300mm dia centrifugally cast (spun) Ductile iron K9 pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as directed by the departmental officer incharge of work- 300mm dia |
| 447 | Manufacture supply delivery,of centrifugally cast (spun) Ductile iron K9 pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as directed by the departmental officer incharge of work as follows - 250mm dia |
| 448 | Manufacture supply delivery,of 200mm dia centrifugally cast (spun) Ductile iron K9 pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as directed by the departmental officer incharge of work- 200mm dia |
| 449 | Supply and delivery of 200mm dia 2.00 m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work - 200 mm dia 2.00 m long for scours on 300 mm line |
| 450 | Supply and delivery of 100mm dia 2.00 m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work- 100 mm dia 2.00 m long for scours on 150 mm line |
| 451 | Supply and delivery of 400mm dia 1.00m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work - 400 mm dia 1.00m long DI DF pipes for sluice and non return valves and flow meter |
| 452 | Supply and delivery of 300mm dia 1.00m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work - 300 mm dia 1.00m long DI DF pipes for sluice and non return valves |
| 453 | Supply and delivery of 250mm dia 1.00m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work- 250 mm dia 1.00m long DI DF pipes for sluice and non return valves |
| 454 | Supply and delivery of 200mm dia 1.00m long Centrifugally cast (SPUN) Ductile iron K9 pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per ss and as directed by the departmental officer incharge of work - 200 mm dia 1.00m long DI DF pipes for sluice and non return valves |
| 455 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings upto 500mm dia of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation andas per ss and as directed by the departmental officer incharge of work |
| 456 | Lowering of 400mm Dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per ss and as directed by the departmental officer incharge of work |
| 457 | Lowering of 300mm Dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per ss and as directed by the departmental officer incharge of work |
| 458 | Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per ss and as directed by the departmental officer incharge of work as follows - 250mm Dia |
| 459 | Lowering of200mm Dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per ss and as directed by the departmental officer incharge of work |
| 460 | Jointing of 400mm Dia K9 D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as per ss and as directed by the departmental officer incharge of work |
| 461 | Jointing of 300mm Dia K9 D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as per ss and as directed by the departmental officer incharge of work |
| 462 | Jointing of250mm Dia K9 D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as per ss and as directed by the departmental officer incharge of work |
| 463 | Jointing of 200mm Dia K9 D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as per ss and as directed by the departmental officer incharge of work |
| 464 | Supply and delivery of 400mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work 400 mm dia sluice valves |
| 465 | Supply and delivery of 300 mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work sluice valves |
| 466 | Supply and delivery of 250mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work- 250 mm dia sluice valves |
| 467 | Supply and delivery of 200mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work- 200 mm dia sluice valves |
| 468 | Supply and delivery of 200mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work- 200 mm dia sluice valves for scour |
| 469 | Supply and delivery of 100mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work - 100 mm dia sluice valves for scour |
| 470 | Supply & Delivery of 100mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves PN1.6(Mpa) with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work 100mm dia. PN 16 on 400 mm dia |
| 471 | Supply & Delivery of 80mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves PN1.6(Mpa) with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work 80mm dia. PN 16 on 300 mm dia |
| 472 | Supply & Delivery of 80mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves PN1.6(Mpa) with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work80mm dia. PN 16 on 250 mm dia |
| 473 | Manufacture, Supply and delivery of 100mm dia PN 1.6 on 400mm dia line Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including transportation complete other incidental charges etc complete as per ss and as directed by the departmental officer incharge of work |
| 474 | Supply, Delivery of 400mm dia D.I Double Flanged Swing Check type Reflux valves (Non Retum Valves) PN 1.6(Mpa) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date. if any) having Body, Cover, Door, Bearing holder with D.I, Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring. Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318), Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel and transportation as per ss and as directed by the departmental officer incharge of work 400mm Dia |
| 475 | Supply, Delivery of 300mm dia D.I Double Flanged Swing Check type Reflux valves (Non Retum Valves) PN 1.6(Mpa) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date. if any) having Body, Cover, Door, Bearing holder with D.I, Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring. Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318), Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel and transportation as per ss and as directed by the departmental officer incharge of work 300mm Dia |
| 476 | Supply, Delivery of 250mm dia D.I Double Flanged Swing Check type Reflux valves (Non Retum Valves) PN 1.6(Mpa) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date. if any) having Body, Cover, Door, Bearing holder with D.I, Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring. Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318), Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel and transportation as per ss and as directed by the departmental officer incharge of work250mm Dia |
| 477 | Supply, Delivery of 200mm dia D.I Double Flanged Swing Check type Reflux valves (Non Retum Valves) PN 1.6(Mpa) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date. if any) having Body, Cover, Door, Bearing holder with D.I, Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring. Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318), Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel and transportation as per ss and as directed by the departmental officer incharge of work - 200mm Dia |
| 478 | Supply, delivery of 400mm Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make as directed by the departmental officer incharge of work |
| 479 | Supply,delivery of 400mm dia strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete as per SS and as directed by the departmental officer incharges of work (rate as per quatation) |
| 480 | Labour charges for lowering and keeping in position of 400mm dia C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work400mm |
| 481 | Labour charges for lowering and keeping in position of 300mm dia C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 482 | Labour charges for lowering and keeping in position of 250mm dia C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 483 | Labour charges for lowering and keeping in position of 200 mm dia C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 484 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work as follows - 200mm |
| 485 | Labour charges for lowering and keeping in position of 100mm diaC.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 486 | Labour charges for fixing Kinetic Air Valves 100mm dia PN 1.6 (Mpa)with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.,and complete as per ss and as directed by the departmental officer incharge of work |
| 487 | Labour charges for fixing Kinetic Air Valves 80mm dia PN 1.6 (Mpa)with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.,and complete as per ss and as directed by the departmental officer incharge of work |
| 488 | Lowering the D.I. Pipes K9 of 400mm dia all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) - 400mm dia |
| 489 | Lowering the D.I. Pipes K9 of 300mm dia all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) - 300mm dia |
| 490 | Lowering the D.I. Pipes K9 of 200mm dia all classes and fittings with langed ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) - 200mm dia |
| 491 | Lowering the D.I. Pipes K9 of 150mm dia all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) - 150mm dia |
| 492 | Jointing the 400mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) - 400mm dia |
| 493 | Jointing the 300mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work ( BIS No.3114/85) - 300mm dia |
| 494 | Jointing the 200mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) - 200mm dia |
| 495 | Jointing the 150mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work ( BIS No.3114/85) - 150mm dia |
| 496 | Jointing the 100mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work ( BIS No.3114/85) - 100mm dia |
| 497 | Jointing the 80mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work ( BIS No.3114/85) - 80mm dia |
| 498 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work.for Thrust Blocks ,Bends and Tees |
| 499 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work.For Anchor Blocks |
| 500 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 501 | Construction Valve Chambers for Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 502 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 503 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 504 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Bottom Slab |
| 505 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows For Side walls allround |
| 506 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 507 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 508 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 509 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 510 | Manufacture, Supply and Delivery of 450mm dia M.S. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates including cost of materials, all labour charge other incidental charge etc complete |
| 511 | Manufacture, Supply and Delivery of 300mm dia C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are and including transportation- 300mm dia as per SS and as directed by the departmental officer incharge of work. |
| 512 | Manufacture, Supply and Delivery of 250mm dia C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates areand including transportation- 250mm dia as per SS and as directed by the departmental officer incharge of work. |
| 513 | Manufacture, Supply and Delivery of 200mm dia C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates areand including transportation- 200mm dia as per SS and as directed by the departmental officer incharge of work. |
| 514 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete and as per IE Rules and as directed by the departmental officer incharge of work |
| 515 | supply and delivery at work site 150mminternal dia M.S.Pipe fabricated with 8 mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001 in suitable lengths painted with two coats of food grade epoxy paint inside and outside to suit the site conditions, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge including Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing and as directed by the departmental officer incharge of work |
| 516 | Implementation of Environmental Management plan |
| 517 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period atCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution network as directed by the departmental officer incharge of work |
| 518 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodatCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution network as directed by the departmental officer incharge of work |
| 519 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiodatCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution network as directed by the departmental officer incharge of work |
| 520 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period atCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution network as directed by the departmental officer incharge of work |
| 521 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodatCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution network as directed by the departmental officer incharge of work |
| 522 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiodatCoffer dam/Intake well and pumping main, Filtration Plant/WTP, Sump, ELSR\"s, Pumping main & Distribution networkas directed by the departmental officer incharge of work |
| 523 | Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) plants & tree guards as directed by the departmental officer incharge of work |
| 524 | Greenbelt development and maintenance in the surroundings / Buffer zone |
| 525 | Health checkups and free medical distribution (6 Camps) |
| 526 | Awareness program/training (every Six Months - 4 Camps) |
| 527 | Sprinkling of wateronce in a day fortwo years (excluding rainy days):500 days @ Rs.800/trip |
| 528 | Hiring for 1 Nos. Vehicleduring execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc., |
| 529 | Construction of Central SCADA Room and Construction of Central SCADA Room (G+1 Building) |
| 530 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - Manual Means upto 3 metres depth in ordinary soil |
| 531 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - Mechanical Means up to 3 metres depth in Ordinary Soil |
| 532 | Filling Sandin foundation of the building as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH This rate including cost of material all labour charges etc complete and as per ss and as direacted by the departmental officer incharge of work. |
| 533 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixerincluding cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing for finished item of work as per SS and as directed by the departmental officer incharge of work. |
| 534 | Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of all materials, including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work. |
| 535 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. As follows. |
| 536 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work.for septic tank walls |
| 537 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. Footings |
| 538 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work.- Pedastals around Columns |
| 539 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work.Columns Up to plinth |
| 540 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. -Plinth Beams 300 x 400 |
| 541 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. Columns |
| 542 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work.Up to First Floor Roof Level |
| 543 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. Beams 230 x 500 |
| 544 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. Lintels |
| 545 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. Sunshades avarre thick ness 100mm width 0.60m wid |
| 546 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work. - Staircase slab 0.15 m thick upto 2nd floor |
| 547 | RCC M- 25 Design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingon all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing centering,scaffolding , vibratingetc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and other incidental charges etc., complete and as per ss and as direacted by the departmental officerincharge of work.RCC Slab 150mm thick Grand flow and Ist floor slabs |
| 548 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 549 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work. - Ground floor |
| 550 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing , scaffolding, all lifts, other incidental charges etc.,Complete as per SS and as directed by the departmental officer incharge of work. - First floor |
| 551 | 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, for toilets walls |
| 552 | Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. for ground floor and 1st floor walls |
| 553 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.for Ground floor and 1st floor |
| 554 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.for ceiling |
| 555 | Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., completefor finished item of work |
| 556 | Flooring with non-skid ceramic tiles of size (600X 600, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. |
| 557 | Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. |
| 558 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities for extenal walls in GF & FF |
| 559 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.for internal wall GF&Ff |
| 560 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.fr seada room in GF&Ff |
| 561 | Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door |
| 562 | Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch double shutter 914.4mm x 1219.20 out from sectiin size 46x52mm shutter from section size 46x46 muliion section size 46x70mmcomplete for finished item of work |
| 563 | Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. |
| 564 | Supplying and fixing of Top Hung Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, The Ventilator to be panelled 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work. |
| 565 | Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodized Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodized aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work for Ground Floor and 1st Floor |
| 566 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages complete as per IE Rules and as directedby the departmental officer incharge of work |
| 567 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages complete as per IE Rules and as directedby the departmental officer incharge of work |
| 568 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building complete as per IE Rules and as directedby the departmental officer incharge of work |
| 569 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges complete as per IE Rules and as directedby the departmental officer incharge of work |
| 570 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges complete as per IE Rules and as directedby the departmental officer incharge of work |
| 571 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. |
| 572 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,complete as per IE Rules and as directedby the departmental officer incharge of work |
| 573 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete as per IE Rules and as directedby the departmental officer incharge of work |
| 574 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 575 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 576 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 577 | Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj. complete as per IE Rules and as directedby the departmental officer incharge of work |
| 578 | Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k complet as per IE rules and as directed by the departmental officer inharge of work |
| 579 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks complet as per ss rules and as directed by the departmental officer inharge of work |
| 580 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work for toilets |
| 581 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm brass plumber union, 31.75mm dia PVC flexible waste pipe of 914.4mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 582 | Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 31.75 mm brass plumber Union best Indian first quality,12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors. |
| 583 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. complet as per ss rules and as directed by the departmental officer inharge of work |
| 584 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) complet as per ss rules and as directed by the departmental officer inharge of work |
| 585 | Supply of 110 mm dia - 3.00mts long pipe Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brandcomplet as per ss rules and as directed by the departmental officer inharge of work |
| 586 | Labour charges for 100mm dia laying, fixing and commissioning the PVC pipes including Supplying & fixing 76.2 mm W.I clamps/ couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicecomplet as per ss rules and as directed by the departmental officer inharge of work |
| 587 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kgcomplet as per ss rules and as directed by the departmental officer inharge of work |
| 588 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour chargescomplet as per ss rules and as directed by the departmental officer inharge of work as follows |
| 589 | 25 mm dia nominal bore -from tank to jn forof individual lines and inlet |
| 590 | 20 mm dia nominal bore -fromjn forof individual lines to toilets |
| 591 | 15 mm dia nominal bore -for internal |
| 592 | S&F of GI & GM fittings |
| 593 | supply, delivery and fixing of the GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size including cost of materials all labour charges, other incidental charge etc complete as per directed by the departmental officer incharge of work |
| 594 | supply, delivery and fixing of theGM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Sizeincluding cost of materials all labour charges, other incidental charge etc complete as per directed by the departmental officer incharge of work |
| 595 | supply, delivery and fixing of theGM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Sizeincluding cost of materials all labour charges, other incidental charge etc complete as per directed by the departmental officer incharge of work |
| 596 | supply, delivery and fixing of the S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalentincluding cost of materials all labour charges, other incidental charge etc complete as per directed by the departmental officer incharge of work |
| 597 | S& F GI union Ist Quality Supply, Delivery and fixing of the following GI union 1st quality including cost of Materials all labour charges other incidental charges etc complete as directed by the departmental officer incharge of work. |
| 598 | 12.70mm |
| 599 | 19.05mm |
| 600 | 25.40mm |
| 601 | Laying new Distribution lineszone-I |
| 602 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Manual Means |
| 603 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Mechanica Means |
| 604 | Manufacture, supply and delivery of the following HDPE Pipes PE 100-Grade PN-6Kg/Sqcm confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 605 | 110mm dia. |
| 606 | 160mm dia. |
| 607 | 200mm dia. |
| 608 | 250mm dia. |
| 609 | 315 mm dia. |
| 610 | Manufacture, supply and delivery of the following HDPE Specials PE 100-Grade confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 611 | a) Pipe ends - long neck |
| 612 | 110mm dia. |
| 613 | 160mm dia. |
| 614 | 160 mm dia for Air TEEs |
| 615 | 200mm dia. |
| 616 | 200 mm dia for Air TEEs |
| 617 | 250mm dia. |
| 618 | 250 mm dia for Air TEEs |
| 619 | 355 mm dia |
| 620 | 355 mm dia for Air TEEs |
| 621 | 355 mm dia for bulk flow meter |
| 622 | b) MS Flanges |
| 623 | 110mm dia. |
| 624 | 160mm dia. |
| 625 | 160 mm dia for Air TEEs |
| 626 | 200mm dia. |
| 627 | 200 mm dia for Air TEEs |
| 628 | 250mm dia. |
| 629 | 250 mm dia for Air TEEs |
| 630 | 355 mm dia |
| 631 | 355 mm dia for Air TEEs |
| 632 | 355 mm dia for bulk flow meter |
| 633 | c) End Caps |
| 634 | 110mm dia. |
| 635 | 160mm dia. |
| 636 | 200mm dia. |
| 637 | d) Reducers |
| 638 | 110X125 mmdia |
| 639 | 125x140 mm dia |
| 640 | 140x160 mm dia |
| 641 | e) TEES |
| 642 | 110mm dia. |
| 643 | 160mm dia. |
| 644 | 200mm dia. |
| 645 | 250mm dia. |
| 646 | 355mm dia |
| 647 | F)Bends |
| 648 | 110mm dia. |
| 649 | 160mm dia. |
| 650 | 200mm dia. |
| 651 | 250mm dia. |
| 652 | 355mm dia |
| 653 | Laying and jointing of the following HDPE pipesby butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete.Thi rate including cost of all labour charges,testing the pipe line,hiring of machinery,fuel charges,wages of drivers and other incidental charges etc.complete as per ss and as directed by the departmental officer incharge of work |
| 654 | 110mm dia. |
| 655 | 160mm dia. |
| 656 | 200mm dia. |
| 657 | 250mm dia. |
| 658 | 315mm dia |
| 659 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and as directed by the departmental officer incharge of work. |
| 660 | 100X2.00m on 110 dia mains for scours |
| 661 | 100X2.00m on 160 dia mains for scours |
| 662 | 100x1.00m long DF pipes for sluice valves |
| 663 | 150X2.00mon 200 mm dia mains for scours |
| 664 | 150x1.00m long DF pipes for sluice valves |
| 665 | 200x1.00m long DF pipes for sluice valves |
| 666 | 250x1.00m long DF pipes for sluice valves |
| 667 | 350x1.00m long DF pipes for sluice valves |
| 668 | 350x1.00m long DF pipes for bulk flow meter |
| 669 | deck foot bends, semicircular bends, air valves |
| 670 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows |
| 671 | 100 mm distrubution |
| 672 | 150mm dia for distrubution |
| 673 | 200mm dia for distrubution |
| 674 | 250mm dia for distrubution |
| 675 | 350mm dia for distrubution |
| 676 | 100mm diaon 110 mmdia mains |
| 677 | 100mm diaon160 mm dia mains |
| 678 | 150 mm dia on 200 mm dia lines |
| 679 | Manufacture, supply and delivery of 80mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN1.6 complete as per ss and as direceted by the departmental officer incharge of work |
| 680 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work as follows |
| 681 | 100 mm distrubution |
| 682 | 150mm dia for distrubution |
| 683 | 200mm dia for distrubution |
| 684 | 250mm dia for distrubution |
| 685 | 350mm dia for distrubution |
| 686 | 350 mm dia for bulk flow meter |
| 687 | 100mm diaon 110 mmdia mains |
| 688 | 100mm diaon160 mm dia mains |
| 689 | 150 mm dia on 200 mm dia lines |
| 690 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.as per as ss and as directed by the departmental officer incharge of work |
| 691 | Construction Valve Chambers for Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 692 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 693 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 694 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Botom slab |
| 695 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Side walls around |
| 696 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 697 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 698 | Lowering the 100mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work BIS No.3114/94) - 100mm |
| 699 | Lowering the 150mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 150mm |
| 700 | Lowering the 200mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 200mm |
| 701 | Lowering the 250mm D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows(BIS No.3114/94) - 250mm |
| 702 | Lowering the 350mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 350mm |
| 703 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) |
| 704 | 80 mm dia |
| 705 | 100 mm dia |
| 706 | 150 mm dia |
| 707 | 200 mm dia |
| 708 | 250 mm dia |
| 709 | 300 mm dia |
| 710 | 350 mm dia |
| 711 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 712 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 713 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 714 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 715 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 716 | Laying new Distribution lineszone-II |
| 717 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Manual Means |
| 718 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Mechanica Means |
| 719 | Manufacture, supply and delivery of the following HDPE Pipes PE 100-Grade PN-6Kg/Sqcm confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 720 | 110mm dia. |
| 721 | 160mm dia. |
| 722 | 200mm dia |
| 723 | 250mm dia |
| 724 | 315mm dia |
| 725 | Manufacture, supply and delivery of the following HDPE Specials PE 100-Grade confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 726 | a) Pipe ends - long neck |
| 727 | 110mm dia. |
| 728 | 160mm dia. |
| 729 | 160 mm dia for Air TEEs |
| 730 | 200mm dia. |
| 731 | 200 mm dia for Air TEEs |
| 732 | 250mm dia. |
| 733 | 250 mm dia for Air TEEs |
| 734 | 315mm dia |
| 735 | 315 mm dia for Air TEEs |
| 736 | 355 mm dia |
| 737 | 355 mm dia for Air TEEs |
| 738 | 355 mm dia for bulk flow meter |
| 739 | b) MS Flanges |
| 740 | 110mm dia. |
| 741 | 160mm dia. |
| 742 | 160 mm dia for Air TEEs |
| 743 | 200mm dia. |
| 744 | 200 mm dia for Air TEEs |
| 745 | 250mm dia. |
| 746 | 250 mm dia for Air TEEs |
| 747 | 315mm dia |
| 748 | 315 mm dia for Air TEEs |
| 749 | 355 mm dia |
| 750 | 355 mm dia for Air TEEs |
| 751 | 355 mm dia for bulk flow meter |
| 752 | c) End Caps |
| 753 | 110mm dia. |
| 754 | 160mm dia. |
| 755 | 200mm dia. |
| 756 | d) Reducers |
| 757 | 110X125 mmdia |
| 758 | 125x140 mm dia |
| 759 | 140x160 mm dia |
| 760 | 160x180 mm dia |
| 761 | 180x200 mm dia |
| 762 | 200x225 mm dia |
| 763 | 225x250 mm dia |
| 764 | 250x280 mm dia |
| 765 | 280x315 mm dia |
| 766 | e) TEES |
| 767 | 110mm dia. |
| 768 | 160mm dia. |
| 769 | 200mm dia. |
| 770 | 250mm dia. |
| 771 | 315mm dia |
| 772 | 355mm dia |
| 773 | F)Bends |
| 774 | 110mm dia. |
| 775 | 160mm dia. |
| 776 | 200mm dia. |
| 777 | 250mm dia. |
| 778 | 315mm dia |
| 779 | 355mm dia |
| 780 | Laying and jointing of the following HDPE pipesby butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete.Thi rate including cost of all labour charges,testing the pipe line,hiring of machinery,fuel charges,wages of drivers and other incidental charges etc.complete as per ss and as directed by the departmental officer incharge of work |
| 781 | 110mm dia. |
| 782 | 160mm dia. |
| 783 | 200mm dia. |
| 784 | 250mm dia. |
| 785 | 315mm dia |
| 786 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and as directed by the departmental officer incharge of work. |
| 787 | 100X2.00m on 110 dia mains for scours |
| 788 | 100X2.00m on 160 dia mains for scours |
| 789 | 100x1.00m long DF pipes for sluice valves |
| 790 | 150X2.00mon 200 mm dia mains for scours |
| 791 | 150X2.00mon 250 mm dia mains for scours |
| 792 | 150x1.00m long DF pipes for sluice valves |
| 793 | 200x1.00m long DF pipes for sluice valves |
| 794 | 250x1.00m long DF pipes for sluice valves |
| 795 | 300x1.00m long DF pipes for sluice valves |
| 796 | 350x1.00m long DF pipes for sluice valves |
| 797 | 350x1.00m long DF pipes for bulk flow meter |
| 798 | deck foot bends, semicircular bends, air valves |
| 799 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows |
| 800 | 100 mm distrubution |
| 801 | 150mm dia for distrubution |
| 802 | 200mm dia for distrubution |
| 803 | 250mm dia for distrubution |
| 804 | 300mm dia for distrubution |
| 805 | 350mm dia for distrubution |
| 806 | for scour |
| 807 | 100mm diaon 110 mmdia mains |
| 808 | 100mm diaon160 mm dia mains |
| 809 | 150 mm dia on 200 mm dia lines |
| 810 | 150 mm dia on 250mm dia lines |
| 811 | Manufacture, supply and delivery of 80mm diaSingle Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN1.6 complete as per ss and as direceted by the departmental officer incharge of work |
| 812 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work as follows |
| 813 | 100 mm distrubution |
| 814 | 150mm dia for distrubution |
| 815 | 200mm dia for distrubution |
| 816 | 250mm dia for distrubution |
| 817 | 300mm dia for distrubution |
| 818 | 350mm dia for distrubution |
| 819 | 350 mm dia for bulk flow meter |
| 820 | 100mm diaon 110 mmdia mains |
| 821 | 100mm diaon160 mm dia mains |
| 822 | 150 mm dia on 200 mm dia lines |
| 823 | 151 mm dia on 250 mm dia lines |
| 824 | Labour charges for 80mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.as per as ss and as directed by the departmental officer incharge of work |
| 825 | Construction Valve Chambers for Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 826 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 827 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 828 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Botom slab |
| 829 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Side walls around |
| 830 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 831 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts |
| 832 | Lowering the 100mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work(BIS No.3114/94) - 100mm |
| 833 | Lowering the 150mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work(BIS No.3114/94) - 150mm |
| 834 | Lowering the 200mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 200mm |
| 835 | Lowering the 250mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 250mm |
| 836 | Lowering the 200mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 300mm |
| 837 | Lowering the 350mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 350mm |
| 838 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) |
| 839 | 80 mm dia |
| 840 | 100 mm dia |
| 841 | 150 mm dia |
| 842 | 200 mm dia |
| 843 | 250 mm dia |
| 844 | 300 mm dia |
| 845 | 350 mm dia |
| 846 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 847 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 848 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 849 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 850 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 851 | Laying new Distribution lineszone-IIA |
| 852 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Manual Means |
| 853 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Mechanica Means |
| 854 | Manufacture, supply and delivery of the following HDPE Pipes PE 100-Grade PN-6Kg/Sqcm confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 855 | 110mm dia. |
| 856 | 160mm dia. |
| 857 | 200mm dia |
| 858 | 250mm dia |
| 859 | 315mm dia |
| 860 | Manufacture, supply and delivery of the following HDPE Specials PE 100-Grade confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 861 | a) Pipe ends - long neck |
| 862 | 110mm dia. |
| 863 | 160mm dia. |
| 864 | 160 mm dia for Air TEEs |
| 865 | 200mm dia. |
| 866 | 200 mm dia for Air TEEs |
| 867 | 250mm dia. |
| 868 | 250 mm dia for Air TEEs |
| 869 | 315mm dia |
| 870 | 315 mm dia for Air TEEs |
| 871 | 355 mm dia |
| 872 | 355 mm dia for Air TEEs |
| 873 | 355 mm dia for bulk flow meter |
| 874 | b) MS Flanges |
| 875 | 110mm dia. |
| 876 | 160mm dia. |
| 877 | 160 mm dia for Air TEEs |
| 878 | 200mm dia. |
| 879 | 200 mm dia for Air TEEs |
| 880 | 250mm dia. |
| 881 | 250 mm dia for Air TEEs |
| 882 | 315mm dia |
| 883 | 315 mm dia for Air TEEs |
| 884 | 355 mm dia |
| 885 | 355 mm dia for Air TEEs |
| 886 | 355 mm dia for bulk flow meter |
| 887 | c) End Caps |
| 888 | 110mm dia. |
| 889 | 160mm dia. |
| 890 | 200mm dia. |
| 891 | d) Reducers |
| 892 | 110X125 mmdia |
| 893 | 125x140 mm dia |
| 894 | 140x160 mm dia |
| 895 | 160x180 mm dia |
| 896 | 180x200 mm dia |
| 897 | 200x225 mm dia |
| 898 | 225x250 mm dia |
| 899 | 250x280 mm dia |
| 900 | 280x315 mm dia |
| 901 | e) TEES |
| 902 | 110mm dia. |
| 903 | 160mm dia. |
| 904 | 200mm dia. |
| 905 | 250mm dia. |
| 906 | 315mm dia |
| 907 | 355mm dia |
| 908 | F)Bends |
| 909 | 110mm dia. |
| 910 | 160mm dia. |
| 911 | 200mm dia. |
| 912 | 250mm dia. |
| 913 | 315mm dia |
| 914 | 355mm dia |
| 915 | Laying and jointing of the following HDPE pipesby butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete.Thi rate including cost of all labour charges,testing the pipe line,hiring of machinery,fuel charges,wages of drivers and other incidental charges etc.complete as per ss and as directed by the departmental officer incharge of work |
| 916 | 110mm dia. |
| 917 | 160mm dia. |
| 918 | 200mm dia. |
| 919 | 250mm dia. |
| 920 | 315mm dia |
| 921 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and as directed by the departmental officer incharge of work. |
| 922 | 100X2.00m on 110 dia mains for scours |
| 923 | 100X2.00m on 160 dia mains for scours |
| 924 | 100x1.00m long DF pipes for sluice valves |
| 925 | 150X2.00mon 200 mm dia mains for scours |
| 926 | 150X2.00mon 250 mm dia mains for scours |
| 927 | 150x1.00m long DF pipes for sluice valves |
| 928 | 200x1.00m long DF pipes for sluice valves |
| 929 | 250x1.00m long DF pipes for sluice valves |
| 930 | 300x1.00m long DF pipes for sluice valves |
| 931 | 350x1.00m long DF pipes for sluice valves |
| 932 | 350x1.00m long DF pipes for bulk flow meter |
| 933 | deck foot bends, semicircular bends, air valves |
| 934 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows |
| 935 | 100 mm distrubution |
| 936 | 150mm dia for distrubution |
| 937 | 200mm dia for distrubution |
| 938 | 250mm dia for distrubution |
| 939 | 300mm dia for distrubution |
| 940 | 350mm dia for distrubution |
| 941 | for scour |
| 942 | 100mm diaon 110 mmdia mains |
| 943 | 100mm diaon160 mm dia mains |
| 944 | 150 mm dia on 200 mm dia lines |
| 945 | 150 mm dia on 250mm dia lines |
| 946 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN1.6 complete as per ss and as direceted by the departmental officer incharge of work |
| 947 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work as follows |
| 948 | 100 mm distrubution |
| 949 | 150mm dia for distrubution |
| 950 | 200mm dia for distrubution |
| 951 | 250mm dia for distrubution |
| 952 | 300mm dia for distrubution |
| 953 | 350mm dia for distrubution |
| 954 | 350 mm dia for bulk flow meter |
| 955 | 100mm diaon 110 mmdia mains |
| 956 | 100mm diaon160 mm dia mains |
| 957 | 150 mm dia on 200 mm dia lines |
| 958 | Labour charges for fixing Kinetic Air Valves of 80mm dia on varions pipelines with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.as per as ss and as directed by the departmental officer incharge of work |
| 959 | Construction Valve Chambers for Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 960 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 961 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 962 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Botom slab |
| 963 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Side walls around |
| 964 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 965 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts |
| 966 | Lowering the 100mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 100mm |
| 967 | Lowering the 150mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 150mm |
| 968 | Lowering the 200mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 200mm |
| 969 | Lowering the 250mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 250mm |
| 970 | Lowering the 300mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 300mm |
| 971 | Lowering the 350mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 350mm |
| 972 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) |
| 973 | 80 mm dia |
| 974 | 100 mm dia |
| 975 | 150 mm dia |
| 976 | 200 mm dia |
| 977 | 250 mm dia |
| 978 | 300 mm dia |
| 979 | 350 mm dia |
| 980 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 981 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 982 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 983 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 984 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 985 | Laying new Distribution lineszone-III |
| 986 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Manual Means |
| 987 | Earthwork in excavation for Pipe Line Trenche by Mechanical/Manual Means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per ss and as directed by the departmental officer in-charge of work as follows Mechanica Means |
| 988 | Manufacture, supply and delivery of the following HDPE Pipes PE 100-Grade PN-6Kg/Sqcm confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 989 | 110mm dia. |
| 990 | 160mm dia. |
| 991 | 200mm dia |
| 992 | Manufacture, supply and delivery of the following HDPE Specials PE 100-Grade confirming to IS 4984-2016including transportation to anywhere in ap from factory to work site , stacking ,other incidental charges and Transit Risk etc complete and as directed by the departmental officer in charge of the work |
| 993 | a) Pipe ends - long neck |
| 994 | 110mm dia. |
| 995 | 160mm dia. |
| 996 | 160 mm dia for Air TEEs |
| 997 | 355 mm dia |
| 998 | 355 mm dia for Air TEEs |
| 999 | 355 mm dia for bulk flow meter |
| 1000 | b) MS Flanges |
| 1001 | 110mm dia. |
| 1002 | 160mm dia. |
| 1003 | 160 mm dia for Air TEEs |
| 1004 | 355 mm dia |
| 1005 | 355 mm dia for Air TEEs |
| 1006 | 355 mm dia for bulk flow meter |
| 1007 | c) End Caps |
| 1008 | 110mm dia. |
| 1009 | 160mm dia. |
| 1010 | d) Reducers |
| 1011 | 110X125 mmdia |
| 1012 | 125x140 mm dia |
| 1013 | 140x160 mm dia |
| 1014 | e) TEES |
| 1015 | 110mm dia. |
| 1016 | 160mm dia. |
| 1017 | 200mm dia. |
| 1018 | 355mm dia |
| 1019 | F)Bends |
| 1020 | 110mm dia. |
| 1021 | 160mm dia. |
| 1022 | 200mm dia. |
| 1023 | 355mm dia |
| 1024 | Laying and jointing of the following HDPE pipesby butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete.Thi rate including cost of all labour charges,testing the pipe line,hiring of machinery,fuel charges,wages of drivers and other incidental charges etc.complete as per ss and as directed by the departmental officer incharge of work |
| 1025 | 110mm dia. |
| 1026 | 160mm dia. |
| 1027 | 200mm dia. |
| 1028 | Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and as directed by the departmental officer incharge of work as follows. |
| 1029 | 100X2.00m on 110 dia mains for scours |
| 1030 | 100X2.00m on 160 dia mains for scours |
| 1031 | 100x1.00m long DF pipes for sluice valves |
| 1032 | 150x1.00m long DF pipes for sluice valves |
| 1033 | 350x1.00m long DF pipes for sluice valves |
| 1034 | 350x1.00m long DF pipes for bulk flow meter |
| 1035 | deck foot bends, semicircular bends, air valves |
| 1036 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows |
| 1037 | 100 mm distrubution |
| 1038 | 150mm dia for distrubution |
| 1039 | 350mm dia for distrubution |
| 1040 | for scour |
| 1041 | 100mm diaon 110 mmdia mains |
| 1042 | 100mm diaon160 mm dia mains |
| 1043 | Manufacture, supply and delivery of 80mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN1.6 complete as per ss and as direceted by the departmental officer incharge of work |
| 1044 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.This rate including cost of all labour charges,hiring of machinery and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work as follows |
| 1045 | 100 mm distrubution |
| 1046 | 150mm dia for distrubution |
| 1047 | 350mm dia for distrubution |
| 1048 | 350 mm dia for bulk flow meter |
| 1049 | 100mm diaon 110 mmdia mains |
| 1050 | 100mm diaon160 mm dia mains |
| 1051 | Labour charges for fixing Kinetic Air Valves 80mm dia with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.as per as ss and as directed by the departmental officer incharge of work |
| 1052 | Construction Valve Chambers for Sluice Valve Earthwork in excavation for valve chamber as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 1053 | Filling Sand for foundation of Valve Chamberas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 1054 | Plain Cement Concretefor Vlave Chamber (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., andcomplete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402).for Valve Chamber bed concrete |
| 1055 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Botom slab |
| 1056 | RCC M-20 Nominal mix for Valve Chamber (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work as follows - For Side walls around |
| 1057 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and as directed by the departmental officer incharge of work for Pre cast slabs |
| 1058 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culvertsfor valve chamber |
| 1059 | Lowering the 100mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 100mm |
| 1060 | Lowering the 150mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 150mm |
| 1061 | Lowering the 350mm dia D.I. Pipes K9 of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,hiring of machinery ,all labour charges,and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work (BIS No.3114/94) - 350mm |
| 1062 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead including all sundries,hiring of machinery ,all labour charges,and filling with water with a water lead upto 500 m and testing to required pressure and other incidental charges etc, complete as per ss and as directed by the departmental officer incharge of work as follows( BIS No.3114/85) |
| 1063 | 80 mm dia |
| 1064 | 100 mm dia |
| 1065 | 150 mm dia |
| 1066 | 300 mm dia |
| 1067 | 350 mm dia |
| 1068 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 1069 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 1070 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 1071 | Filling crushur stone dustin pipe line trenches for cutting portionas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of stone dust ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 1072 | Restoration of CC road with Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity andspreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD and complete as per SS and as directed by the departmental officer incharges of work |
| 1073 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 1074 | Providing house service connections on HDPE mains at other side in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 1075 | Providing house service connections on HDPE mains at House holdside in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 1076 | Providing house service connections on HDPE mains at other side in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 1077 | Providing Instrumentation and Automation of the Pumping System, Supervisory Control and Data Acuasation System (SCADA) & Providing 24x7 water supply system at 200 KL ELSR at Bus stand area |
| 1078 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor charges other incidental charges etc complete and as per SS and as directed by the department officer for raw water pumping station and clear waater pumping station |
| 1079 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, chargesincluding cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. for raw water pumping station and clear waater pumping station |
| 1080 | Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., completeand cost of materials all labour charges, other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work for clear water pumping main. |
| 1081 | Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer as follow |
| 1082 | a)DN 250 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification |
| 1083 | b)DN 200 - PN 16 pump control valve for Clear Water Pumping Station as per the above specification |
| 1084 | Supply and deliveryof 350mm dia separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc andcomplete, and as directed by the dept., officer for raw water and clear water pumping station. |
| 1085 | Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor cost materials other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work for raw water inlet and clear water outlet treatement plant. |
| 1086 | Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor andcost and conveyance of all material, labor cost materials other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work for raw water inlet and clear water outlet treatement plant. |
| 1087 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and cost and conveyance of all material, labor cost materials other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work for raw water inlet and clear water outlet treatement plant. |
| 1088 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and cost and conveyance of all material, labor cost materials other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work forclear water outlet of WTP |
| 1089 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. for Raw Water inlet and clear water outlet WTP |
| 1090 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor andand as per SS and as directed by the department officer. for raw water inlet and clear water outlet at WTP |
| 1091 | Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour andas per SS and as directed by the department officer. for raw water and clear water pumping station |
| 1092 | supply and delivery of 150mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. and other incidental charges etc complete as per SS and as directed by the departmental officer incharges of work. |
| 1093 | supply and delivery of 250mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation and other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work. |
| 1094 | Supply and deliveryof 150mm dia separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and other incidental charges etc., complete, and as directed by the dept., officer.150MM Dia. |
| 1095 | Supply and deliveryof 250mm dia separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and other incidental charges etc., complete, and as directed by the dept., officer.250MM Dia. |
| 1096 | Supply and delivery of150mm dia Electrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor and other incidental charges etc completeand as per SS and as directed by the department officer - 150mm |
| 1097 | Supply and delivery of250mm dia Electrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor other incidental charges and as per SS and as directed by the department officer - 250mm |
| 1098 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete as per specification of SOR and as directed by the dept., officer. as follows |
| 1099 | 150mm |
| 1100 | 250mm |
| 1101 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. for firms at various ELSR\"s |
| 1102 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor other incidental charges and as per SS and as directed by the department officer for fixing at various ELSR\"s |
| 1103 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and other incidental charges etc complete as per SS and as directed by the departmental officer incharge of work for fixing of various ELSR\"s. |
| 1104 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges as per technical specifications including cost and conveyance of all material including transport and labor other incidental charges etc., complete and as directed by the dept., officer. for fixing at various ELSR\"s. |
| 1105 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and as per SS and as directed by the department officer. |
| 1106 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 1107 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost ofincluding cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 1108 | Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. for various ELSR\"s |
| 1109 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 1110 | supply and delivery of 200mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 other incidental charge and including transportation and as directed by the departmental officer incharge of work. |
| 1111 | Supply and deliveryof 200mm dia Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour and then incidental charges etc., complete, and as directed by the dept., officer. |
| 1112 | Supply and delivery of 200mm Dia Electrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor other incidental charges and as per SS and as directed by the department officer |
| 1113 | Supply ad delivery of 200mm dia M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 1114 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor and other incidental charges and as per SS and as directed by the department officers incharges of work for inlet of DMA under 500 KL ELSRs at bridge peta |
| 1115 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and other incidental charges and as per SS and as directed by the department officer for Inlet of DMA-1 under 500 KL ELSR at Bridge peta |
| 1116 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer for inlet of DMA under varion ELSR\"s |
| 1117 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges and other incidental charge including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer for Inlet of DMA under 500 KL ELSR at Bridge peta. |
| 1118 | Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges and other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. incharges of work for inlet of DMA-1 under 500KL ELSRs at Bridge peta. |
| 1119 | Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour and other incidental charges etc., complete, and as directed by the dept., officer. for DMA fo various ELSR\"s |
| 1120 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges and other incidental charges including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer for Inlet of DMA of 500 KL ELSR at Bridge peta. |
| 1121 | Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc andetc., complete, and as directed by the dept., officer. for DN 15 - PN 16 AMR Compatible Mechanical Water Meter as per above specification for all reservoirs comman area |
| 1122 | Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and etc., complete, and as directed by the dept., officer.under DMA under 500 KL ELSR at Bridge peta |
| 1123 | Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws other incidental charges etc., complete and as directed by the departmment officer. |
| 1124 | Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer. Desktop PC Station with specification of I7Processor, 8 GB Ram, ,512 GB SSD,Licensed OS, 21\" Screen with Mouse, keyboard, and relevant accessories make of LENOVO/ HP/ DELL 55\" LED Display make of Sony/Samsung/ LG or equilant with ethernet/HDMI/VGA supported for front end view by connecting with PC in dual mode operation and View the SCADA screenswith required cables and connectors etc., complete. Modem with specifications of Fibre Port having ILL, PON &Network Features, Speed 100/1000, LAN Ports, Fibre port x 1 N0make of CISCO/ HP/ FF/ONV/PHOENIX/Dlink/ Suggested by the telecom provider |
| 1125 | 3 KVA Stabilizer with specifications of 220 V.ACInput/ 220 V.AC output, necessary terminal wires etc., complete complete 3 KVA online ups with specifications of 220 V.ACInput/ 220 V.AC output, Static By pass with isoltion transformer, Required Battery bank,make ofVertex/EATON/ BPE/ NUMERIC /RIELLO / ENERTECH complete 3 in one on line B/W A4 Lazer Jet printer Network for all local control stations and central station with registration with any communication provider and payment of minimum one year subscription and establishment of communicationEstablishment of Local SCADA station at Kovvuru Municipality with the above specifications. |
| 1126 | Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer. Development and providing the WEB based SCADA for Operation and Monitoring by the individual ULB where implemented the Reservoir management to AMI management. (Expandable upto Source to end user)Development of front end view monitoring and operating application in Digital Twin Mode with 3D & 2D model including designing, animation, drawings and integration of SCADA with field devices through MQTT/ MODBUS/ TCPIP protocol etc., complete. Develop, Supply, install and commissioning of customized WEB applications for Data analytics, Visulation, Trends, Data auditing, generating the reports as required by the customerat the time of commissioningDevelop, Supply, install and commissioning of Anroid & IO\"s application for data monitoring by through Mobi-APP as required by the customerat the time of commissioningcompleteEstablishment of Local SCADA station at Kovvuru Municipality with the above specifications. |
| 1127 | Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge. |
| 1128 | Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual |
| 1129 | O&M |
| 1130 | Engaging of Man Mazdoor (Skilled / Semi Skilled) Like Electrician, pump Operator, Mechanic, Helpers, watch man, Filter bed operator, Diploma Engineer, Lab Technician, Technical work inspector etc, as per the requirment. The rate includes wages along with Municipal allowance, conveyancer charges for transporation to the work site including statutory provisions as per norms etccomplete for sucessful by Maintainace of the entire scheme as directed by the departmental officer incharge of the work (for 10 years + 2 years Defect liablity period as follows |
| 1131 | i)Personal required for operating Intake/Offtake well/Pump housesPersonal required for operating Intake/Offtake well/Pump houses |
| 1132 | a)Operator |
| 1133 | b)Fitter/Helper |
| 1134 | c)Watch man |
| 1135 | ii)Personal required at operating Raw water rising mains |
| 1136 | Fitter/Helper |
| 1137 | iii)Personal required at operating Water treatment plants & Sump |
| 1138 | Operator |
| 1139 | Fitter/Helper |
| 1140 | Lab Technician |
| 1141 | Electrician/Mechanic |
| 1142 | Watch man |
| 1143 | iv)Personal required at operating Clear water rising mains |
| 1144 | Fitter/Helper |
| 1145 | v)Personal required at operating Gravity mains |
| 1146 | Watchman |
| 1147 | vi)Personal required at operating Service reservoirs |
| 1148 | Watchman |
| 1149 | vii)Personal required at operating distribution system |
| 1150 | Fitter/Helper |
| 1151 | Supply, delivery and stacking of Chorine gas for disinfection 3mg/Lt as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines. |
| 1152 | Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., ., complete.rement at 20 mg/lit |
| 1153 | Repairs to pumpsets & Water pipe lines(2 years after execution period) complete as per ss and as directed by the departmental officer incharge of work |
| 1154 | iv)Replacement of glands of sluice valves |
| 1155 | v) Replacements of balls of Air valves |
| 1156 | vi) Greease |
| 1157 | vii) Gland Packing |
| 1158 | Provision towards purchase pipe jointing materials, etc |
| 1159 | LEAKAGES |
| 1160 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete |
| 1161 | 315 mm HDPE Pipes |
| 1162 | 280 mm HDPE Pipes |
| 1163 | 250 mm HDPE Pipes |
| 1164 | 225 mm HDPE Pipes |
| 1165 | 200 mm HDPE Pipes |
| 1166 | 160 mm HDPE Pipes |
| 1167 | 110 mm HDPE Pipes |
| 1168 | To asist to attend the service calls by the seniour service engineer |
| 1169 | With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the GVMC Officials for obtaining of required information when ever asks. |
| 1170 | To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 1171 | Replacement of necessary servicable materials(Reagents) for Chlorine Analysers*Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuets. |
| 1172 | Replacement of necessary tranducers for PH analysers |
| 1173 | Replacement of necessary tranducers for Turbidity analysers |
| 1174 | Interconnection for Data receive station from all Local Contol RTU panels. |
| 1175 | Data transfer from RTU control panels |
| 1176 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete |
| 1177 | To monitor all issues related to both operation & service |
| 1178 | To monitor all meters location through SCADA station and give feedback to the service engineers. |
| 1179 | With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks. |
| 1180 | To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 1181 | Interconnection for Data receive station from all Local Contol RTU panels. |
| 1182 | Data storage and reporting system for view through WEB and Mobile networks |
| 1183 | for day to day Operations & Reporting |
| 1184 | JANGAREDDYGUDEM MUNICIPALITY |
| 1185 | Construction of 8.00m dia.(201.22 KL) Raw Water Intake Well inYerra Kalvuva Reservior |
| 1186 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By mechanical means |
| 1187 | a) Upto Initial Liftof 3.00m 0.00-3.00m |
| 1188 | b) 3.00 to 6.00m depth |
| 1189 | Filling sand in foundation trenches of Intake well bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1190 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in foundations and under drain bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the workbut excluding seigniorage charges for bed concrete of Intake well. |
| 1191 | Supply and placing of the M30 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, lifting, delifting curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.Butexcluding seigniorage Charges. as follows |
| 1192 | a) for Base slab |
| 1193 | b) for Side walls 85.75-72=13.75 upto 3.00mts |
| 1194 | Side Wallof the Well of 0.50m thick 1st d lift i.e 1.00mts |
| 1195 | Side Wallof the Well of 0.50m thick 2nd d lift i.e 0.50mts |
| 1196 | Side Wallof the Well of 0.50m thick above BL i.e 3.00mts |
| 1197 | Side Wallof the Well of 0.50m thick 1st lift i.e 1.00mts |
| 1198 | Side Wallof the Well of 0.50m thick 2 nd lift i.e 1.00mts |
| 1199 | Side Wallof the Well of 0.50m thick 3 rd lift i.e 1.00mts |
| 1200 | Side Wallof the Well of 0.50m thick 4 th lifti.e 1.00mts |
| 1201 | Side Wallof the Well of 0.50m thick 5th lifti.e 1.00mts |
| 1202 | Side Wallof the Well of 0.50m thick 6th lift i.e 1.00mts |
| 1203 | Side Wallof the Well of 0.50m thick 7th lifti.e 1.00mts |
| 1204 | Side Wallof the Well of 0.50m thick 8th lift i.e 1.00mts |
| 1205 | Supply and placing of the M30 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, lifting, delifting curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.Butexcluding seigniorage Charges as follows |
| 1206 | a) for Pump house Columns |
| 1207 | b) for floor beams- Ring Beam |
| 1208 | c) for Floor Slab 0.30 m thick |
| 1209 | d) for Lintel Beams alround |
| 1210 | e) for Roof Beams |
| 1211 | f) for Roof slab 0.125m thick |
| 1212 | g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end |
| 1213 | Brick Masonry in CM (1:6) with 2nd class clay Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials and labour charges,watering, lifting , scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges. As follows. |
| 1214 | for Super structure of Pump house |
| 1215 | for Pump house Parapet wall |
| 1216 | Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges.As follows. |
| 1217 | for Pump house inside |
| 1218 | for Parapet wall |
| 1219 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges.for ceiling |
| 1220 | Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges |
| 1221 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 1222 | Painting two coats with synthetic enamel paint over a base coat of red oxide led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as ss and as directed by the departmental authorities (APDSS No:1201) |
| 1223 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per SS 1108 and as directed by the departmental officer in charge of work. |
| 1224 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.50Mx1.20M as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completedand as directed by the departmental officer in charge of work.For Pump house 1.50x1.20m size |
| 1225 | Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper and other incidental chargesetc., complete as per the directions of departmental authorities payment shall be made a per log book and certifyed by the Engineer in charge |
| 1226 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1227 | Supply and delivery of 300mm dia\"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including conveyance to work spot and stacking care fully at site etc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1228 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, the rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. |
| 1229 | Centrifugally cast (spun) Ductile Iron Fittings upto 500mm diaconforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) including Transportation and other incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1230 | Lowering, keeping in position and fixing 300mm diaD.I. sluice valves (with cap / with hand wheel & Reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces . For 300mm dia. for fixing to Intake well Inlet Pipesother incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1231 | Lowering the C.I. Pipes, D.I. Pipes of 300mm dia all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but including conveyance from source of supply as per BIS No.3114/94. For300mm dia. DI90 deg bend other incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1232 | Jointing the 300mm dia D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85other incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work for ladders. |
| 1233 | Supply and delivery ofS.S304 gradeoperating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities. Including fabrication and erectionother incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1234 | Supply and delivery ofS.S304 gradeforhand Railing 1.2 m height around the walk waythe intake well as per the actuals and as directed by the departmental authorities. Including fabrication and erectionother incidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1235 | Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab 304 grade.This rate including cost of materialall labour chargesincidental chargesetc.complete as per S.S and as directed by the departmental officer in charge of work |
| 1236 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages. This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1237 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work . |
| 1238 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building- for 6 pointsunit each Makes: Finolex / RR kabel / Havells /APAR E-beam for cable Makes: Legrand Arteor / Schneider Zen celo / Crabtree Murano/ GM-Zenova. for Modular switches Makes: Vimal opel / Starex Smile / CPL for Jumbo celling rose.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work . |
| 1239 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges unit eachMakes: Finolex / RR kabel / Havells /APAR E-beam for cableMakes: Legrand Arteor / Schneider Zen celo / Crabtree Murano/ GM-Zenova.for Modular swithesMakes: GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega for Jumbo Celling rose .This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work . |
| 1240 | Supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges etc.,unit 1.00 Rmt Makes: KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar. .This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work . |
| 1241 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. unit 1.00 RmtMakes: Finolex / RR kabel / Havells /APAR E-beam . This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1242 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,unit 1.00 rmtMakes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Nanadicab / Payal / Kundan cab/Sudhakar.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1243 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1244 | Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1245 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan includingRegulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride. This rate including cost of materialincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work. But excluding labour charges. |
| 1246 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1247 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT. This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1248 | Supply and fixing of 20W, 2400 lumens, T8 not lessthan 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K- 5700K, minimum CRI>70, etc., as per IS 10322 (Part5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category |
| 1249 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete .This rate including cost ofall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1250 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete . .This rate including cost ofall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1251 | Providing temporory Island for preparation platform for sinking of Intake well of 30m dia island and 6.00m height |
| 1252 | Providing and construction of temporary island of 30.00m. diameter for preparation of platform with a height of 6.00mts for temporay Island for preparation platform top width 30.00mts minium height 6.00mts and formation temparay road of worksite etc. for construction of well foundation for 8.00m. internal dia. Intake well as per Tech. Specification 1203 MORTH.Sand bags for Crane with grab 1 cum capacity for Wooden ballies 8\" Dia and 6 m long for Wooden ballies 2\" Dia and 6 m long 3\" to 4\".This rate including cost of materialall labour charges cost of sand bages,filling chrges ,hiring of machinery ,fuilchares , wages of driver , consumbkl, cost of wooden bullies, and otherincidental chargesetc.complete as per SSand as directed by the departmental officer in charge of work |
| 1253 | Gravel fillinginfor tempory island approach roadas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge.for approach ramp payment mode a per level payment. |
| 1254 | Construction of ApprochBridge 200.00m long for Intake well in Yerra Kalvuva Reservior |
| 1255 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per SS and as directed by the departmental officer incharge of the workfor foundations of approach bridgein restricted places. As follows |
| 1256 | Mechanical Means up to 3 metres depth in ordinary soils |
| 1257 | manual means up to 3 metres depth in ordinary soils |
| 1258 | Mechanical Means up to 3 metres depth in ordinary rock not requiring blasting |
| 1259 | Filling sand in foundation trenches of column footing bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1260 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under column footing bed using 162.0 kgs of cement, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in foundations and under drain bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer in charge of work. |
| 1261 | Supply and placing of the M30 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, lifting, delifting curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.Butexcluding seigniorage Charge.As follows |
| 1262 | column footings |
| 1263 | For columns |
| 1264 | For Intermediate Braces |
| 1265 | For Carriage Slab Beams |
| 1266 | For Carriage Slab 0.30m thick |
| 1267 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work as per ss and as directed by the departmental officer in charge of workin all floors.( APSS No.126) |
| 1268 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.Sand as dorected by the departmental officer in charge of work |
| 1269 | Supply and erection of 3# of 29.84 KW (35 HP)VTPumpsets each with a duty of 80 LPS and a total head of 25m( Two working and one stand bye)for pumping Raw water from intake well to Aerator of Proposed WTPfor intermediate requirement 2033 |
| 1270 | Supply and erection of 3# of 29.84 KW (35 HP)VTPumpsets each with a duty of 80 LPS and a total head of 25m( Two working and one stand bye)for pumping Raw water from intake well to Aerator of Proposed WTPfor intermediate requirement 2033Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE VT Pumpset Capable of Discharging 80 LPS and a total head of 25m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and |
| 1271 | dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST. Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST. Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 No |
| 1272 | Suitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 3 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare - 1 NoSuitable Phase indicating lamps reputed make - 3 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel BoardOut-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E Rules |
| 1273 | Supply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top coverSupply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;Ring Spanner 3/16 to 1\" - 1NoDouble end spanner set 3/16\" to 1\" - 1 NoPipe Wrench 18\" & 4\" - 2NosScrew drivers 6\", 10\" & 12\" - 3 Nos |
| 1274 | Cutting Plier 12\" - 1No2 Kgs Hammer with Handle - 1 NoNose Plier - 1 NoFlat and Half round smooth file - 2 NosAdjustable Spanner 6\"Column pipe Clamps - 2 pairsLine Shaft Clamps - 1 PairLine rope and clamps double the weight of pump - 2 setsGland thghtening Spanner - 1 NoSpitter removing Spanner - 1 NoSupply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; completeFire extiguisher 3Kg capacity - 2 NosRubber Mat 6\" x 4\" - 2NosFire Buckets with stand and three buckets - 1 NoRubber Hand Gloves - 1 SetsDanger Board Plates - 4 NosFirst aid kit with chart - 1NoShock Treatment Chart - 1NoPortable rechargeble torch light - 1 NoSupply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc; |
| 1275 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection . This rate including cost ofall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. |
| 1276 | VFD (HD) for the same capacity of selected motor on the above with the specifications ofthe VFD shall be designed to operating temperature at 50 deg C.. ambient without deration, having facility to trip at Over temperature of VFD heat sink shall be above 115 deg C..,LCD keypadshould be built in display unit with graphical trend monitor, have life monitoring functions for devices like IGBT, Cooling fans and capacitors, communication protocol of profinetandadvanced open loop vector controlSuitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feederSuitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feederPower transformer, required push buttons and MFM for each Main pump feeder |
| 1277 | Errection of 630 KVA Transformer atHead water workswith Transformer yard 15.00x12.00m |
| 1278 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply as per IE Rules and as directed by the departmental officer incharge of work. |
| 1279 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., as per IE Rules and as directed by the departmental officer incharge of work. |
| 1280 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 1281 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure as per IE Rules and as directed by the departmental officer incharge of work. |
| 1282 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps as per IE Rules and as directed by the departmental officer incharge of work. |
| 1283 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., as per IE Rules and as directed by the departmental officer incharge of work. |
| 1284 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures as per IE Rules and as directed by the departmental officer incharge of work. |
| 1285 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 1286 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications as per IE Rules and other incidental charges etc., complete as directed by the departmental officer incharge of work.and as per the details given below: |
| 1287 | A) Earth Electrodes |
| 1288 | B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 |
| 1289 | C) Epoxy insulators |
| 1290 | D) No.\"8\" SWG Copper wire. MAT 04141 |
| 1291 | Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.This rate including cost of transformer, other required items and as directed by the departmental officer incharge of work for the following items.Makes : As per list of recommended brands as category I. MAT-08780a630KVA1. Quantity : 12. Rated KVA :630 KVA3. Service & Location: Continuous Outdoor Distribution Transformer4. Mounting : Plinth.5. Wound : CopperDouble wound6. Type :Core type oil immersed7. Cooling : ONAN |
| 1292 | 7. Cooling : ONAN8. TempRise : 40⁰C in oil 45⁰C by resistance9. Vector Group:Dyn 1110. Primary Connection :Delta11. Nominal Voltage / Current : ______12. Highest system Voltage: 12000V13. Primary Frequency :50 HZ +/- 3%14. Number of Phases : 315. Primary wires:316. Secondary connection : Star17. SecondaryVolts / Current :433V18. Secondary phases :319. Secondary wires:420. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps)21. Terminal arrangement. a.HV: HT terminal box as per the site condition.b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable22. LV:One separate terminal for earthing.23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats25. Percentage Impedance at 75 deg C AT 4.526. No load Current Less than 2% of full load Current |
| 1293 | 27. Standrad Fittings & Accessories.a. Rating and terminal marking plate: Oneb. Lifting Lugs:Twoc. Off-circuit tap switch :One d. EarthingTerminals :Twoe. Radiators ( Attachable):Adequate f.Explosion vent with Diaphragm :One g. Conservator with Drain plug:oneh. Oil filling hole with cap :Onei.Oil level indicator : One j.Dehydrating Silicagel Breather : Onek. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing: One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type) |
| 1294 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431 |
| 1295 | LT panel |
| 1296 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1297 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1298 | Incoming |
| 1299 | a) 630A TPN SDFU for main switch. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1300 | b) 630A 4pole change over switch. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 1301 | c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980 |
| 1302 | d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required.This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Make: L&T /C&S/SALZER/HPL MAT 03989 |
| 1303 | e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983 |
| 1304 | f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Make: L&T /C&S/SALZER/HPL MAT 03990 |
| 1305 | g).3RYB Phase indication lamps with leds Quotation This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1306 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 |
| 1307 | Out-Going |
| 1308 | 630A TPN SDFU forCW pump house motors This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1309 | 630A TPN SDFU for compressor/mechanical equipments. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1310 | 630A TPN SDFU for low lift sump Raw water motors This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1311 | 630A TPN SDFU for Space . This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1312 | 630A TPN SDFU for lighting section. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 1313 | 630A 4pole change over switch for lighting section. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 1314 | .KWH digital meter fro lighting section Quotation This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1315 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3.This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes: As per list of recommended brands as category I.MAT-02879 |
| 1316 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2. This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . Makes: As per list of recommended brands as category I MAT-02938 |
| 1317 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1318 | 1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1319 | Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.This rate including cost of material and alabour charges, transporttion other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work .Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03459 |
| 1320 | Transformer yard at HWW |
| 1321 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per SS and as directed by the departmental officer incharge of the workNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual meansFor Column footings |
| 1322 | Filling for River sand in foundation Column footing bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1323 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under Column footing bed using 162.0 kgs of cement, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in foundations and under drain bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the workbut excluding seigniorage charges |
| 1324 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete |
| 1325 | column footings |
| 1326 | Columns1.20-0.10-0.10-0.30+1.80 |
| 1327 | Plinth beam2(15+12)=54-gate3.00=51.00 |
| 1328 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and other incidental charges as directed by the departmental officer in charge of work |
| 1329 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1330 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). |
| 1331 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, transportation to site finishing, applying red oxide paint as primary coat etc complete as per SS and as directed by the departmental officer in charge of work |
| 1332 | Providind Synthic enamil paint two coats over the primery coat including cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss and as directed by the departmental officer in charge of work |
| 1333 | supply and filling the transformer yard with 40mm HBG metal m/c. This rate including cost of material, spreading charges, sectionng, other incidental charges etc., as directed by the departmental officer in charge of work |
| 1334 | Providing 500mm dia. D.I. K9 Raw Water Pumping main from Intake well in Yerra Kalvuva Reserviorto Aerator of WTP ( 100m MS pipe+600m DI K9 pipe)) |
| 1335 | Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam . This rate including cost of hire of electrical andother incidental charge of work and all labour charges etc., Complete as per ss and as directed by the departmentalstacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches. |
| 1336 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per SS and as directed by the departmental officer incharge of the work . For Pipe line trenches as follows.: |
| 1337 | Mechanical Means up to 3 metres depth in ordinary soil |
| 1338 | Manual means upto 3 metres depth in ordinary soils |
| 1339 | Mechanical means up to 3 metres depth in ordinary rock not requiring blasting |
| 1340 | Filling sand bedding in pipe line bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1341 | Supply and delivery of 500mm dia D.I K9 Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, excluding GST and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. |
| 1342 | Supply and delivery of Centrifugally cast (spun) Ductile Iron fittings upto 500mm dia conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, to site and other incidentl charges etc., complete as per S.S and as directed by the departmental authorities. |
| 1343 | Supply and delivery of centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating including transportation to site and other incidentl charges etc., complete as per S.S as follows: |
| 1344 | 500mm dia. 1.00m. Long for sluice and non return valves and flow meter |
| 1345 | 500mm dia. 2.00m. Long at intake well |
| 1346 | Lowering of 500mm dia D.I K9 DI socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 1347 | Jointing of 500mm dia D.I K9 D.I Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 1348 | Lowering D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,other incidental charges from source of supply as per BIS No.3114/94 other incidental charges. |
| 1349 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 other incidental charges etc., complete |
| 1350 | 500mm dia. |
| 1351 | 150mm dia. |
| 1352 | Manufacture, supply and delivery at work site 500mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001 with cement lining in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge. This rate including cost of material and alabour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IR Rules and as directed by the departmental officer incharge of work . |
| 1353 | Supply and delivery of 500mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538 other incidental charges etc., complete as directed by the departmental officer incharge of work .PN16 including transportation PN 1.6 |
| 1354 | Supply & Delivery of 500mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/ PTFE/ EPDM/ NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1355 | Supply, Delivery of 500mm dia D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and other incidental charges as directed by the departmental officer incharge of work . |
| 1356 | Labour charges for 500mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves and flow meter and other incidental charges |
| 1357 | Labour charges for 150mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. dia. of Air Valve and other incidental charges as directed by the departmental officer incharge of work . |
| 1358 | Construction of R.C.C. thrust blocks using using VRCC M25 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete as directed by the departmental officer incharge of work . |
| 1359 | Construction of Anchor blockswith P.C.C. M25 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 1360 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1361 | Construction of 500mm diaRCC Sluice Valve chambers suitable to the sluice valves including cost and conveyance of all materials and all labour charges, Cost of material, Earthwork excavation , sand bedding, VCC 1:4:8 , RCC Bed and side wll, RCC Slab duly providing suitable opening for operation of valves, cost of steel and other incidenal chagrges etc., complete., as per approved type design as approved by the department.etc.complete as per S.Sfinished item of work and as directed by the dpartmental office incharge of work. |
| 1362 | Construction of150mm dia RCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges cost of steel and other incidenal chagrges etc., complete., as per approved type design as approved by the department.etc.complete as per S.Sfinished item of work and as directed by the dpartmental office incharge of work. |
| 1363 | Collection ,supply and spreading of crusher stone dust from approved quarries for road restoration including compaction and watering etc., complete ramming, all labour charge and other incidental charges |
| 1364 | Using Concrete mixture up to Plinth : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.M30 as directed by the dpartmental office incharge of work. |
| 1365 | Manufacture, Supply and delivery of 500mm di MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are transportation charges, all labour charges, other incidental charges, cost of material as per SS and as directed by the dpartmental office incharge of work. |
| 1366 | Construction of13.00 MLD Rapid Gravity Filtration plant |
| 1367 | Construction of13.00 MLD Rapid Gravity Filtration plant Construction of Rapid Gravity Filtration Plant including all civil,mechanical and electrical works using sand as filter media, compatible with SCADA arrangements, duly following relavant IS codes in the design of plant components including trial running for 90 days etc., completeCivilWorks(All works of VRCC Shall be in M30 design mix)1). Stilling Chamber and Areation cascade2). Raw water channel with Stainless Steel Weir of SS304L Grade material and also with digital flow meters3) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS Blades with gear wheel arrangements etc, Using 304L Grade Steel4) Clariflucculator / Flocculation tanks with the components of central driven circular clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L tubes /angulars for durability & chemical resistant with wheel arrangements etc,.5) Filter house, Chemical house, Alum store, Laboratory room , Chlorination plant room, toilet etc. (All structures shall be provided RCC roof only).Chemical house & Chlorinator rooms are to be isolated. |
| 1368 | 6) Wash water tank of suitable capacity shall be constructed at minimum clearance of 2.00m, above the roof slab of Filter beds / any other structure.Chlorine contact tank7) All the Doors and Windows shall be of Best Teak wood/Aluminium /UPVC make, except entrance door. The entrance door including shutter in filter house shall be with best teak wood of size of 2.40 X 2.40 mts.a) Main Doors of the individual Buidings shall be made of Best Teak woodb) Other Internal Doors of the buildings shall be of Compreesed wood/Aluminium/ UPVC materials.c) Ventilators shall be provided for each building/structure of suitable size as per NBC statndards.8) All pipes and valves in Plant shall be of D.I. materials. All theConnecting pipes of the plant coponents such as from Flash mixer to Clarifloculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I. material. The size of sludge disposal pipe shall be minimum of 450 mm dia with D.I D/F pipe.8) All pipes and valves in Plant shall be of D.I. materials. All theConnecting pipes of the plant coponents such as from Flash mixer to Clarifloculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I. material. The size of sludge disposal pipe shall be minimum of 450 mm dia with D.I D/F pipe. |
| 1369 | 9) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be suffuiciently spaced for easy operation & maintenance and inspection. 10)The bottom level of the wash water control chamber must be above G.Lso as to dispose the wash water and sludge from Clariflocculator by gravity to disposal point.Additional specificaions11) Railing for all the components (Clarifloculator, Filter House, Staircas eetc,.) shall be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia pipe for top horizotals,25mm dia for middle row and 40mm dia verticals spaced at interval of not more than 1.00m c/c.12) Inspection / Path ways in filter beds : Middle pathway: Minimum of 1.50m,Side pathway: Minimum of 1.20m13) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room, Laboratory) shall be provided with Non-skid tiles of approved make14 ) The basement ofFiltriatiion plant building shall be minimum of 1.20m above the existing nearby Road top level.15) Minimum head room of 2.00m shall be provided , at the alum mixing chambers in alum store for inspection & maintenance16) The minimum width of entrance hall for the Filter House shall be 4.50m and Laboratory, of min size .of 3.30 X 4.50m. |
| 1370 | 17) High efficient Air Blowers shall be installed to the design requirement with low noise pollution , environmental pollution as per PCB guide lines &Testing of blowers as per I.S norms at site.18) UPVC pipes shall be provided for water drain.Filter pipe manifolds shall be assembled with HDPE pipes19) Alum storage capacity shall be designed for minimum period of 90 days. Consumables shall be provided for 2115 Running Hours of WTP.22) Chlorinator : Vacuum type chlorinator shall be provided with following specifications: a) Vacuum operated solution feeding type Vacuum Regulator, Rotameter, Rate setting Valve, built-in NRV, Gas Overflow out let by man folding to mount the system with the unit. b) The unit shall consist of Ejector with necessary accessories such as Check Valve, Drain Valve and Vacuum relief Valves - for control of chlorinator dosage. c) The Accessories and manifolds shall be chlorine resistant and made of carbon steel seam less pipes, copper tube with brass fittings of suitable size & dimensions, with diaphragm sealed chlorine pressure gauge arrangementsb) The unit shall consists of Ejector with necessary accessories such as Check Valve, Drain Valve and Vacum relief Valves - for control of chlorinator dosage.c) The Accessories and manifolds shall be chlorine resistant and made of corbon steel seam less pipes, copper tube with brass fittings of suitable size & dimensions, with diaphram sealed chlorine pressure gauge arrangements |
| 1371 | d) Water Booster Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with Head ranging from 16 to 35 m e) The water & solution carrying pipes shall be made of UPVC material of suitable size incl. all specials such as Tee\"s , Bends, couplings & NRVs and also Pressure Gauges of suitable range. f) Chlorine Gas Leak detector with alarm indicator. The installation includes all necessary accessories, civil and mechanical works, manifold header installations, injector fixing, connection with UPVC pipes, solution piping’s, fixing of motors as per standard specifications and commissioning of Chlorination Plant to the required demand, with a defect liability period of 1 year. The chlorinator of may be of any reputed make or any make of Metito/Toshocow-Jesco Siemens Industrial Devices. g) Life breathing apparatus. f) Chlorine Gas detector with alarm indicator.The installation includes all necessary accssories, civil and mechanical works,manifold header installations, injector fixing, connection with UPVC pipes, solution pipings, fixing of motors as per standardspeicfications and commissioning of Cholirnation Plant to the required demand, with a deffect liability period of 1 year.The cholrinator of may be of any reupted make or any make of Metito/Toshocow-Jesco/ Industrial devices.g)Life breathing operators.h)Chlorine escape BA Set.i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator for Post Chlorination |
| 1372 | ii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator for Post Chlorinationiii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator for Post ChlorinationMechnical Equipment1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical resistance. (Alam tanks must be bound with corrosion resistant material (HDPE Lining, Bitumen Coating, tiles etc)2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical resistance3) Filtration plant euqipment instrumentation and piping4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge arrangeemnt etc.,5) Pneumatic tyre wheel shall be provided for the bridge clariflocculator6) Wash water tank fittings and pumpsets with 100% stand by.7)Air blower with motor 100% stand by and pipe connections made with of SS Pipes Confirming to SS304 Grade, in filter bed region.8)Spares & Tools for 2 years9) Gaseous Chlorination with cylinders has to provided with protectionmeasures.Electrical Equipment 1)Necessary power supply wiring to motors and switches bus bar connections as per I.E. Rules2)Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc. |
| 1373 | 3) Erecting mechanical & Electrical equipment, trial run for 90 days 23.50 hours per day testing the treated water for efficient standards and maintenance of records and imparting training to staff.4)Supply of 6 - sets of completion plans and maintenance manual and brochures5) All cables shall be with of copper material, Cable ducts shall be covered with MS / Aluminum chequed plate.6) Min LUX levels inside the treatment plant shall be maintained7) Yard lighting shall be provided as per normsAutomation for flow measurements1) Equipment for Flow of Conductivity, Turbidity, Ph value, Residual Chlorine with recording & data storage facility (Computer based) & Alarm by SMS or other methods2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water & Clear water flows by installing Digital Flow meters to measure the flows at Raw water Channel and at each filter bed individually and combined for measuring the quantities of water treated with a facility to record and store the readings & also to send messages to the assigned designatories about the variations/ defficiencies in the flow including alerts for back wash requirements of filter beds, and recovery of data for the past 360 days. |
| 1374 | All the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make. The equipment shall have the following specifications, but not limited to:Hardware:i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter bed out lets with accessories consists ofii)Electrode Type: General type, Scraper type or replaceable type Electorde made with material of SS external Ultra Touch Sensors as per requirementiii)Customised Application Requirement : Sensors with Interface logic control board with serial interfaces, including accessories such as Add-on port, external DC Power Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication Button and memory of Data Storage for 30Days , status of Filter Bed Level indicator,Rating, Reading on LCB Display, Menu Driven Data for sending to OnsiteBig Display, operated with Battery Power of any reputed make or any equalent make.iv)Customised Application Requirement: Power Sensors Interface logic control board with support 8 Power Sensing tags, Central System Interfacing Communication, |
| 1375 | On - board analog to Digit Convert Integrate Circuit of any reputed make or any equalent make.v)Customised Application Requirement: Centralized System with two serial interfaces, 3 Nos of Add-On ports, One external DC Power Socket,On - Board Buffer, On - Board Timer, On - Board RS485 Communication,On - Board RS 232 Communication, On - Board GPRS/GSM Module, On -Board Voice Chip, On - Board Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display on LCD Display, Menu Driven, Menu Navigate Keypad, sendind data to the Web Server,Communication with GPRS , operated with Battery Power of any reputed make or any equalent makeThe software shall be designed with Web Domain with Data Base Server and Web Name as per the directions of the Departmental AuthoritiesThe application of Software for Web design & Desktop shall meet the following requirements:Onsite Display: Letters with size of 1.5’ seven Sigment LED Display with Interfacefor each Filter Bed, for Onsite Display, by displaying the Bed Leves, Ratings, Readings in 3 Columns , for each bed of the plant in succesive rows and cumulative results at the bottom of the screenOff Site Display: Letters with size of 1.5’ seven Sigment LED Display with Interface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total Cumulative Reading as specified on On-site Display Features |
| 1376 | The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level Triggering, before & after Bed wash.The software shall also have the features of sending messages to the mobiles of the Departmental designatories indicating Bed Low Levels,Power Supply timings, Bed Wash timings and its status, Power Supply timings and its status Grid View Table, Motor Working time and its status Grid View Table, all trigger events and schedule information and including all Snap View Reports, all Daily, Monthly, Yearly Reports, all Power Working Reports, all Power Events Information etc,, and other incidental charges etc., complete as per SS and as directed by the departmental officer incharge of work . |
| 1377 | Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation and other incidental charges etc., complete as per SS and as directed by the departmental officer incharge of work as follows: |
| 1378 | 400 mm dia DI 2.00 m Long DF pipes from WTP to clear water sump |
| 1379 | 400mm dia1.00 mtr long 1.00 length vertical from WTP |
| 1380 | Supply, deliveryof 400mm dia D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. |
| 1381 | Manufacture, Supply and delivery of 400mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 as per S.S. and as directed by the departmental officer incharge of the work. |
| 1382 | Labour charges for 400mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves as per IS:1538. PN16 as per S.S. and as directed by the departmental officer incharge of the work. |
| 1383 | Lowering the 400mm daC.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2 |
| 1384 | Jointing the 400mm dia C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 1385 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per SS and as directed by the departmental officer incharge of the work for Valve chmber |
| 1386 | Filling sand in foundation of Valve chamber trenches of drain bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1387 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profitetc complete for finished item of work as per SS and as directed by the departmental officer incharge of work. (APSS No. 402). |
| 1388 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shuttering and other incidental charges etc., complete as directed by the departmental officer incharge of work as follows: |
| 1389 | For Bottom Slab of Valve Chmaber |
| 1390 | For Side walls allround of Valve Chmaber |
| 1391 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering, shutteringfor coverslabs |
| 1392 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including and other all materials etc., complete for finished item of work in all floors. as per SS and as directed by the departmental office incharge of work. |
| 1393 | Construction 14.50m dia m dia (396.62 KL) clear watersump atWTP |
| 1394 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per SS and as directed by the departmental officer incharge of the work Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth as follows: |
| 1395 | for clear watersump foundations 0-3.00m Machanical means |
| 1396 | for clear watersump foundations 3.00-6.00m Machanical means |
| 1397 | Filling sand in foundation trenches of drain bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1398 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in foundations and under drain bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the workbut excluding seigniorage charges |
| 1399 | Supply and placing of the M30 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.Butexcluding seigniorage Charges. |
| 1400 | Raft |
| 1401 | For side walls circular 0.30m thick below GL |
| 1402 | For side walls circular 0.30m thick above GL |
| 1403 | Columns 0.30 x 0.30m 3.60-0.30 |
| 1404 | Roof beams |
| 1405 | Roof slab0.15m thick 0.786x(15.10^2-6.00^2) |
| 1406 | Roof dome slab 0.15m thick |
| 1407 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 1408 | Providing Painting walls with snowcern or equivalent paint two coats by using approved water proof paint grade-1 over one coat prime coat by using cement primary coat by using cement primer making 3 coats including cost of Colourwashing two coats Using snowcem including cost cost of material and all bour charges, transporttion other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1409 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities |
| 1410 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1411 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD as per approved design by the department and as per direction of the deparment. |
| 1412 | Construction of 10.50x7.50m pump house for clear water pumps and motors at proposed WTP |
| 1413 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means as follows: |
| 1414 | Mechanical Means up to 3 metres depth in ordinary soil |
| 1415 | Manual Means up to 3 metres depth in ordinary soil |
| 1416 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling.This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1417 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1418 | Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1419 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete as follows: |
| 1420 | Column footings |
| 1421 | Pedestals |
| 1422 | Columns |
| 1423 | Plinth beam3.50-0.30 |
| 1424 | Lintel beams |
| 1425 | Roof Beams |
| 1426 | Roof slab0.125m thick, |
| 1427 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end |
| 1428 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work . |
| 1429 | Ground floor |
| 1430 | 1st floor Parapet wall2(11.70+8.63)=40.66 |
| 1431 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work. out side & inside |
| 1432 | Ground floor |
| 1433 | 1st floor Parapet wall |
| 1434 | Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work for ceiling |
| 1435 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc.and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of workfor flooring |
| 1436 | Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work (in and out side) |
| 1437 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc and conveyance of maerials, all labour charges, scaffolding and other ncidental charges etc complete as per ss and as directed by the departmental officer incharge of work. for finished item of work as per special spn: 1108 |
| 1438 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.5m X 1.20m as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 1439 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1440 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete |
| 1441 | Providing Synthic enamil paint two coats over the primery coat excluding cost of one coat primer including cost and conveyance of all matrial and all labour charges etc complete as per ss and as directed by the departmental officer incharge of work . |
| 1442 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss and as directed by the departmental officer incharge of work . |
| 1443 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1444 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1445 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1446 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1447 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1448 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1449 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1450 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1451 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1452 | S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1453 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan with double ball bearings, air delivery more than 00 cubic meter/min but without Regulator.Makes: Crompton HS Plus/ Havells ES Neo/ Orient/ Energy Star/Halonix(Zephyr)/ Polycab(ynergy Star) unit each complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 1454 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega as per IE Rules and as directed by the departmental officer incharge of work. |
| 1455 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT as per IE Rules and as directed by the departmental officer incharge of work. |
| 1456 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs. as per IE Rules and as directed by the departmental officer incharge of work. |
| 1457 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 1458 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete as per IE Rules and as directed by the departmental officer incharge of work. |
| 1459 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. as per IE Rules and as directed by the departmental officer incharge of work. |
| 1460 | Supply, delivery and erection of 3 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., |
| 1461 | Construction of 10.50x7.50m pump house for clear water pumps and motors at proposed intermediate sump |
| 1462 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means as follows |
| 1463 | Mechanical Means up to 3 metres depth in ordinary soil |
| 1464 | Manual Means up to 3 metres depth in ordinary soil |
| 1465 | Filling Sand for foundation for pump houseas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 1466 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as directed by the departmental officer incharge of work . |
| 1467 | Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as directed by the departmental officer incharge of work . |
| 1468 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete as follows: |
| 1469 | Column footings |
| 1470 | Pedestals |
| 1471 | Columns |
| 1472 | Plinth beam3.50-0.30 |
| 1473 | For brakets (0.5+0.3)/2 =0.40 |
| 1474 | Roof Beams |
| 1475 | Roof slab0.125m thick, |
| 1476 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end |
| 1477 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss as directed by the departmental officer incharge of work . |
| 1478 | Ground floor |
| 1479 | 1st floor Parapet wall2(11.70+8.63)=40.66 |
| 1480 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of workas per S.S out side & inside |
| 1481 | Ground floor |
| 1482 | 1st floor Parapet wall |
| 1483 | Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of workas per S.Sfor ceiling |
| 1484 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of workas per S.S for flooring |
| 1485 | Colourwashing two coats using snowcem over the primery coatincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of workas per S.S out side & inside |
| 1486 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 |
| 1487 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.50m X 1.20m as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 1488 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1489 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete |
| 1490 | Providind Synthic enamil paint two coats over the primery coat including cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss as directed by the departmental officer incharge of work . |
| 1491 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss |
| 1492 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps as per IE Rules and as directed by the departmental officer incharge of work . |
| 1493 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages as per IE Rules and as directed by the departmental officer incharge of work . |
| 1494 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages as per IE Rules and as directed by the departmental officer incharge of work . |
| 1495 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building as per IE Rules and as directed by the departmental officer incharge of work . |
| 1496 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges as per IE Rules and as directed by the departmental officer incharge of work . |
| 1497 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges as per IE Rules and as directed by the departmental officer incharge of work . |
| 1498 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. as per IE Rules and as directed by the departmental officer incharge of work . |
| 1499 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,as per IE Rules and as directed by the departmental officer incharge of work . |
| 1500 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1501 | S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going as per IE Rules and as directed by the departmental officer incharge of work . |
| 1502 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1503 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1504 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1505 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.as per IE Rules and as directedby the departmental officer incharge of work |
| 1506 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete |
| 1507 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete |
| 1508 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 1509 | Supply ,Erection and Commissioning of Crane Gantry Girder of Capacity of 3.00 T including cost and conveyance of all material and all labour charges etc complete as per ISI and as directed by the dept . Including all taxes & Labour cess s follows: |
| 1510 | Construction 11.00m dia m dia (285.32 KL) clear waterintermediate sump |
| 1511 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth |
| 1512 | for clear watersump foundations 0-3.00m Machanical means |
| 1513 | Mechanical Means 3 metres to 6 metres depth in ordinary soil |
| 1514 | Manual means 3 metres to 6 metres depth in ordinary soil |
| 1515 | Filling Sandin foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges. |
| 1516 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges |
| 1517 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer as follows: |
| 1518 | Raft |
| 1519 | For side walls circular 0.30m thick below GL |
| 1520 | For side walls circular 0.30m thick above GL |
| 1521 | Columns 0.30 x 0.30m 3.60-0.30 |
| 1522 | Roof beams |
| 1523 | Roof slab0.15m thick 0.786x(11.60^2-5.00^2) |
| 1524 | Roof dome slab 0.15m thick |
| 1525 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 1526 | Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work (in and out side) |
| 1527 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the departmental officer incharge of work . |
| 1528 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1529 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.as directed by the departmental officer incharge of work . |
| 1530 | Errection of3 # of 55.95 KW (80 HP)CF Pumpsets each with a duty of 80 LPS and a total head of 50.00 m( two working and one stand bye) for pumping clear water from clear water sump at Headwater works to ELSRs at Junction near JRG Community hall(for filling intermediate sump at Uppalameta and ELSRs at Santha market and sai balaji layout for intermediate requirements 2033 |
| 1531 | Errection of3 # of 55.95 KW (80 HP)CF Pumpsets each with a duty of 80 LPS and a total head of 50.00 m( two working and one stand bye) for pumping clear water from clear water sump at Headwater works to ELSRs at Junction near JRG Community hall(for filling intermediate sump at Uppalameta and ELSRs at Santha market and sai balaji layout for intermediate requirements 2033Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 80 LPS and a total head of 50m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC |
| 1532 | horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST.Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 1533 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps TPN switch fuse unit with HRC fuse for spare - 1 NoSuitable Phase indicating lamps reputed make - 3 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 1534 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E RulesSupply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top coverSupply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc; |
| 1535 | Ring Spanner 3/16 to 1\" - 1NoDouble end spanner set 3/16\" to 1\" - 1 NoPipe Wrench 18\" & 4\" - 2NosScrew drivers 6\", 10\" & 12\" - 3 NosCutting Plier 12\" - 1No2 Kgs Hammer with Handle - 1 NoNose Plier - 1 NoFlat and Half round smooth file - 2 NosAdjustable Spanner 6\"Column pipe Clamps - 2 pairsLine Shaft Clamps - 1 PairLine rope and clamps double the weight of pump - 2 setsGland thghtening Spanner - 1 NoSpitter removing Spanner - 1 NoSupply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; completeFire extiguisher 3Kg capacity - 2 NosRubber Mat 6\" x 4\" - 2NosFire Buckets with stand and three buckets - 1 NoRubber Hand Gloves - 1 SetsDanger Board Plates - 4 Nos |
| 1536 | First aid kit with chart - 1NoShock Treatment Chart - 1NoPortable rechargeble torch light - 1 NoSupply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 1537 | Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.VFD (HD) for the same capacity of selected motor on the above with the specifications ofthe VFD shall be designed to operating temperature at 50 deg C.. ambient without deration, having facility to trip at Over temperature of VFD heat sink shall be above 115 deg C..,LCD keypadshould be built in display unit with graphical trend monitor, have life monitoring functions for devices like IGBT, Cooling fans and capacitors, communication protocol of profinetandadvanced open loop vector controlSuitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feederSuitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feederPower transformer, required push buttons and MFM for each Main pump feeder |
| 1538 | Errection of2 # of 14.92 KW (20 HP)CF Pumpsets each with a duty of 27 LPS and a total head of 40.00 m( one working and one stand bye) for pumping clear water from proposed IntermediateSump atUppalametta to proposed 800 KL ELSR Gov. Junior College |
| 1539 | Errection of2 # of 14.92 KW (20 HP)CF Pumpsets each with a duty of 27 LPS and a total head of 40.00 m( one working and one stand bye) for pumping clear water from proposed IntermediateSump atUppalametta to proposed 800 KL ELSR Gov. Junior CollegeSupply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 27 LPS and a total head of 40m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate |
| 1540 | including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST.Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 1541 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 2 Nos)Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 2 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 2 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 2 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 2 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare - 1 NoSuitable Phase indicating lamps reputed make - 2 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 4 NosSupply, delivery and errection and jointing of suitable cable connection |
| 1542 | Incoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E RulesSupply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top cover |
| 1543 | Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;Ring Spanner 3/16 to 1\" - 1NoDouble end spanner set 3/16\" to 1\" - 1 NoPipe Wrench 18\" & 4\" - 2NosScrew drivers 6\", 10\" & 12\" - 3 NosCutting Plier 12\" - 1No2 Kgs Hammer with Handle - 1 NoNose Plier - 1 NoFlat and Half round smooth file - 2 NosAdjustable Spanner 6\"Column pipe Clamps - 2 pairsLine Shaft Clamps - 1 PairLine rope and clamps double the weight of pump - 2 setsGland thghtening Spanner - 1 NoSpitter removing Spanner - 1 NoSupply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; completeFire extiguisher 3Kg capacity - 2 NosRubber Mat 6\" x 4\" - 2NosFire Buckets with stand and three buckets - 1 NoRubber Hand Gloves - 1 Sets |
| 1544 | Danger Board Plates - 4 NosFirst aid kit with chart - 1NoShock Treatment Chart - 1NoPortable rechargeble torch light - 1 NoSupply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 1545 | (Deducting the SCADA Valves on Delivery Side. The following valves rates are deducted in the above pumpsets150 mm dia sluice valves150 mm dia non return valvesloweing of valves 150 mm diajointing of valves 150 mm dia |
| 1546 | Errection of 2 # of 11.19 KW (15.00 HP)CF Pumpsets each with a duty of 30 LPS and a total head of 28.00 m( one working and one stand bye) for pumping clear water from proposed IntermediateSump atUppalametta to proposed 800 KL ELSRs Uppalametta zone-IV |
| 1547 | Errection of 2 # of 11.19 KW (15.00 HP)CF Pumpsets each with a duty of 30 LPS and a total head of 28.00 m( one working and one stand bye) for pumping clear water from proposed IntermediateSump atUppalametta to proposed 800 KL ELSRs Uppalametta zone-IVSupply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 30 LPS and a total head of 28m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials |
| 1548 | including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST.Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 1549 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 2 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 2 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 2 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 2 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare - 1 NoSuitable Phase indicating lamps reputed make - 2 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 4 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 1550 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E Rules |
| 1551 | Supply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.Codes |
| 1552 | Supply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc; |
| 1553 | Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top cover |
| 1554 | Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc; |
| 1555 | Ring Spanner 3/16 to 1\" - 1No |
| 1556 | Double end spanner set 3/16\" to 1\" - 1 No |
| 1557 | Pipe Wrench 18\" & 4\" - 2Nos |
| 1558 | Screw drivers 6\", 10\" & 12\" - 3 Nos |
| 1559 | Cutting Plier 12\" - 1No |
| 1560 | 2 Kgs Hammer with Handle - 1 No |
| 1561 | Nose Plier - 1 No |
| 1562 | Flat and Half round smooth file - 2 Nos |
| 1563 | Adjustable Spanner 6\" |
| 1564 | Column pipe Clamps - 2 pairs |
| 1565 | Line Shaft Clamps - 1 Pair |
| 1566 | Line rope and clamps double the weight of pump - 2 sets |
| 1567 | Gland thghtening Spanner - 1 No |
| 1568 | Spitter removing Spanner - 1 No |
| 1569 | Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete |
| 1570 | Fire extiguisher 3Kg capacity - 2 Nos |
| 1571 | Rubber Mat 6\" x 4\" - 2Nos |
| 1572 | Fire Buckets with stand and three buckets - 1 No |
| 1573 | Rubber Hand Gloves - 1 Sets |
| 1574 | Danger Board Plates - 4 Nos |
| 1575 | First aid kit with chart - 1No |
| 1576 | Shock Treatment Chart - 1No |
| 1577 | Portable rechargeble torch light - 1 No |
| 1578 | Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc; |
| 1579 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., |
| 1580 | All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer |
| 1581 | Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 1582 | (Deducting the SCADA Valves on Delivery Side. The following valves rates are deducted in the above pumpsets |
| 1583 | 150 mm dia sluice valves |
| 1584 | 150 mm dia non return valves |
| 1585 | loweing of valves 150 mm dia |
| 1586 | jointing of valves 150 mm dia |
| 1587 | Errection of3 # of 14.92 KW (20.00 HP)CF Pumpsets each with a duty of 18 LPS and a total head of 50.00 m( two working and one stand bye) for pumping clear water from proposedIntermediateSump atUppalametta to proposed 1000 KLGLSR at Rajivi Nagar zone-I |
| 1588 | Errection of3 # of 14.92 KW (20.00 HP)CF Pumpsets each with a duty of 18 LPS and a total head of 50.00 m( two working and one stand bye) for pumping clear water from proposedIntermediateSump atUppalametta to proposed 1000 KLGLSR at Rajivi Nagar zone-I |
| 1589 | Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 18 LPS and a total head of 50m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST. |
| 1590 | Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST. |
| 1591 | Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST. |
| 1592 | Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 1593 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos) |
| 1594 | Suitable capacity MCCB for incoming supplystandard reputed make - 1 No |
| 1595 | Suitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 Nos |
| 1596 | Suitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1No |
| 1597 | Suitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 No |
| 1598 | Suitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 no |
| 1599 | Suitable Amps Ammeter for individual reading of motor load standard reputed make- 3 Nos |
| 1600 | Suitable Amps TPN switch fuse unit with HRC fuse for spare - 1 No |
| 1601 | Suitable Phase indicating lamps reputed make - 3 Nos |
| 1602 | Suitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 Nos |
| 1603 | Supply, delivery and errection and jointing of suitable cable connection |
| 1604 | Incoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 1605 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to Motor |
| 1606 | Cable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E Rules |
| 1607 | Supply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.Codes |
| 1608 | Supply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc; |
| 1609 | Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top cover |
| 1610 | Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc; |
| 1611 | Ring Spanner 3/16 to 1\" - 1No |
| 1612 | Double end spanner set 3/16\" to 1\" - 1 No |
| 1613 | Pipe Wrench 18\" & 4\" - 2Nos |
| 1614 | Screw drivers 6\", 10\" & 12\" - 3 Nos |
| 1615 | Cutting Plier 12\" - 1No |
| 1616 | 2 Kgs Hammer with Handle - 1 No |
| 1617 | Nose Plier - 1 No |
| 1618 | Flat and Half round smooth file - 2 Nos |
| 1619 | Adjustable Spanner 6\" |
| 1620 | Column pipe Clamps - 2 pairs |
| 1621 | Line Shaft Clamps - 1 Pair |
| 1622 | Line rope and clamps double the weight of pump - 2 sets |
| 1623 | Gland thghtening Spanner - 1 No |
| 1624 | Spitter removing Spanner - 1 No |
| 1625 | Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete |
| 1626 | Fire extiguisher 3Kg capacity - 2 Nos |
| 1627 | Rubber Mat 6\" x 4\" - 2Nos |
| 1628 | Fire Buckets with stand and three buckets - 1 No |
| 1629 | Rubber Hand Gloves - 1 Sets |
| 1630 | Danger Board Plates - 4 Nos |
| 1631 | First aid kit with chart - 1No |
| 1632 | Shock Treatment Chart - 1No |
| 1633 | Portable rechargeble torch light - 1 No |
| 1634 | Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc; |
| 1635 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., |
| 1636 | All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer |
| 1637 | Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 1638 | (Deducting the SCADA Valves on Delivery Side. The following valves rates are deducted in the above pumpsets |
| 1639 | 150 mm dia sluice valves |
| 1640 | 150 mm dia non return valves |
| 1641 | loweing of valves 150 mm dia |
| 1642 | jointing of valves 150 mm dia |
| 1643 | Construction wash water recirculation of 7.00m dia sump(92.43 KL) atWTP |
| 1644 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthas follows |
| 1645 | for wash water recirculation sump foundations 0-3.00m Machanical means |
| 1646 | forwash water recirculation sump foundations 3.00-6.00m Machanical means |
| 1647 | Filling Sandfor foundation as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.This rate including cost of sand ,filling charges,watering,ramming,and other incidental charges etc., complete as per ss and directed by the departmental officer incharge of work |
| 1648 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges |
| 1649 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer as directed by the departmental officer incharge of work . |
| 1650 | Raft |
| 1651 | For side walls circular 0.30m thick below GL |
| 1652 | For side walls circular 0.30m thick above GL |
| 1653 | Columns 0.30 x 0.30m 3.60-0.30 |
| 1654 | Roof beams |
| 1655 | Roof slab0.15m thick 0.786x(7.60^2-3.00^2) |
| 1656 | Roof dome slab 0.15m thick |
| 1657 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 1658 | Providing Painting walls with snowcern or equivalent paint two coats by using approved water proof paint grade-1 over one coat prime coat by using cement primary coat by using cement primer making 3 coats including cost of Colourwashing two coats Using snowcem including cost cost of material and all bour charges, transporttion other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1659 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges and other incidental charges power charges welding rod etc complete as per ss and as directed by the dept authorities |
| 1660 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1661 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade-3 size, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. |
| 1662 | Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator |
| 1663 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches. |
| 1664 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling.This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . for Pipe line sand bedding |
| 1665 | Manufacture supply delivery,of 100mm dia centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as directed by the departmental officer incharge of work . |
| 1666 | Supply and delivery of 100mm dia Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1667 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions upto 500mm dia as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate etc.,complete as per S.S. and as directed by the departmental authorities. |
| 1668 | Lowering of 100mm dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 1669 | Jointing of 100mm da D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 1670 | Manufacture, Supply and delivery of 100mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 |
| 1671 | Manufacture, Supply and delivery of100mm dia DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 |
| 1672 | Labour charges for 100mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. |
| 1673 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.and other incidental charges etc., complete as directed by the departmental officer incharge of work . as follows |
| 1674 | 500mm dia |
| 1675 | 100 mm dia |
| 1676 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1677 | 500 mm dia |
| 1678 | 250 mm dia |
| 1679 | 100 mm dia |
| 1680 | Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.as per SS and as directed by the departmental officer incharge of work . |
| 1681 | Construction of 150mm dia Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 1682 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 1683 | Supply and erection of 2# of 1.87KW(2.50HP) CF Pumpsets each with a duty of 12 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areator for recirculation |
| 1684 | Supply and erection of 2# of 1.87KW(2.50HP) CF Pumpsets each with a duty of 12 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation |
| 1685 | Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.This rate is including cost of Pumpset, transportation charges, as per IE Rules and as directed by the departmental officer incharge of work . |
| 1686 | Construction of electrician / operator/watchmanquarters at HWW |
| 1687 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places as follows: |
| 1688 | Mechanical means up to 3 metres depth in ordinary soil |
| 1689 | Manual Means up to 3 metres depth in ordinary soil |
| 1690 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss as directed by the departmental officer incharge of work for Foundaion bedding |
| 1691 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, Centering curing etc., complete as directed by the departmental officer incharge of work. |
| 1692 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix as follows |
| 1693 | column footings |
| 1694 | Columns1.50-0.15-0.15-0.20-0.25 =0.75 + basement 0.75m+superstructure 3.35m=4.85m |
| 1695 | Plinth beam |
| 1696 | Lintle beamsWindows |
| 1697 | Roof Beams |
| 1698 | Roof slab0.125m thick with 0.30m extension all sides |
| 1699 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows |
| 1700 | Loft slab 0.075m thick kitchen |
| 1701 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,Scaffolding liftngcuring for 21 daysetc complete as per ss as directed by the departmental officer incharge of work as follows |
| 1702 | Ground floor |
| 1703 | 1st floor |
| 1704 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing, scaffolding, etc. complete as per SS as directed by the departmental officer incharge of work. out side & inside |
| 1705 | Ground floor |
| 1706 | 1st floor Parpet wall |
| 1707 | Cement plastering for Ceiling using opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for inside above 3.5 m Height This rate is including cost of material and all labour charges, scaffolding charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1708 | Providing Painting walls with snowcern or equivalent paint two coats by using approved water proof paint grade-1 over one coat prime coat by using cement primary coat by using cement primer making 3 coats including cost of Colourwashing two coats Using snowcem including cost cost of material and all bour charges, transporttion other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1709 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss as directed by the departmental officer incharge of work . |
| 1710 | Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workas follows |
| 1711 | Door -D - 1.20X2.10 m |
| 1712 | doorsD1 -1.0X2.10m |
| 1713 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.50m X 1.20 m as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 1714 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work |
| 1715 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work |
| 1716 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1717 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing, scffolding, smooth finish etc. complete as per SS as directed by the departmental officer incharge of work for floorring |
| 1718 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete |
| 1719 | Providing two coats of Synthic enamil paint over new Iron works including one coat red oxide paint cost and conveyance of all material and all labour charges etc complete as per ss for Grills as directed by the departmental officer incharge of work . |
| 1720 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps as per IE Rules and as directed by the departmental officer incharge of work. |
| 1721 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages as directed by the departmental officer incharge of work . |
| 1722 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages as per IE Rules and as directed by the departmental officer incharge of work. |
| 1723 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1724 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour chargesThis rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1725 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1726 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1727 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1728 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1729 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1730 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1731 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1732 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT complete as per IE Rules and as directedby the departmental officer incharge of work |
| 1733 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.as per IE Rules and as directedby the departmental officer incharge of work |
| 1734 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete |
| 1735 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete |
| 1736 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 1737 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks as per SS and as directed by the departmental officer incharge of work . |
| 1738 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke |
| 1739 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 1740 | Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors |
| 1741 | Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors. |
| 1742 | Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work. |
| 1743 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 1744 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 1745 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 1746 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 1747 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg |
| 1748 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete |
| 1749 | 25 mm dia nominal bore -from tank to jn forof individual lines |
| 1750 | 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 1751 | 15 mm dia nominal bore -for internal |
| 1752 | S&F of GI &GM fittings |
| 1753 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 1754 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 1755 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 1756 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 1757 | S& F GI union Ist Quality |
| 1758 | 12.70mm GI union |
| 1759 | 19.05mm GI union |
| 1760 | 25.40mmGI union |
| 1761 | For septic Tank |
| 1762 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth by manual means upto 3.00m depth |
| 1763 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling.This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1764 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1765 | Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss for Septic tank walls as directed by the departmental officer incharge of work . |
| 1766 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside for Septic tank walls as directed by the departmental officer incharge |
| 1767 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for Septic tank as directed by the departmental officer incharge |
| 1768 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1769 | Construction of electrician / operator/watchmanquarters at HWW |
| 1770 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places as follows |
| 1771 | Mechanical means up to 3 metres depth in ordinary soil |
| 1772 | Manual Means up to 3 metres depth in ordinary soil |
| 1773 | Filling sand in foundation trenches of column footing bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 1774 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under column footing bed using 162.0 kgs of cement, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in foundations and under drain bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer in charge of work. |
| 1775 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix s follows |
| 1776 | column footings |
| 1777 | Columns1.50-0.15-0.15-0.20-0.25 =0.75 + basement 0.75m+superstructure 3.35m=4.85m |
| 1778 | Plinth beam |
| 1779 | Lintle beamsWindows |
| 1780 | Roof Beams |
| 1781 | Roof slab0.125m thick with 0.30m extension all sides |
| 1782 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows |
| 1783 | Loft slab 0.075m thick kitchen |
| 1784 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssas directed by the departmental officer incharge of work . |
| 1785 | Ground floor |
| 1786 | 1st floor |
| 1787 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing, scaffolding etc. complete as per SS out side & insideas directed by the departmental officer incharge of work . |
| 1788 | Ground floor |
| 1789 | 1st floor |
| 1790 | Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS forinside above 3.5 m Heightas directed by the departmental officer incharge of work . |
| 1791 | Providing Painting walls with snowcern or equivalent paint two coats by using approved water proof paint grade-1 over one coat prime coat by using cement primary coat by using cement primer making 3 coats including cost of Colourwashing two coats Using snowcem including cost cost of material and all bour charges, transporttion other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1792 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss as directed by the departmental officer incharge of work . |
| 1793 | Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workas follows |
| 1794 | Door -D - 1.20X2.10 m |
| 1795 | doorsD1 -1.0X2.10m |
| 1796 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows of size 1.5X1.2m as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 1797 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work |
| 1798 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work |
| 1799 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1800 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing, scaffolding, sommth fnishing etc. complete as per SSfor floorring as directed by the departmental officer incharge of work . |
| 1801 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete |
| 1802 | Providing two coats of Synthic enamil paint over new Iron works including one coat of red oxide paint cost and conveyance of all material and all labour charges etc complete as per ss for Grills as directed by the departmental officer incharge of work . |
| 1803 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps |
| 1804 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages |
| 1805 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages |
| 1806 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1807 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour chargesThis rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1808 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1809 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1810 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1811 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1812 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete This rate is including cost of material and all labour charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1813 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan includingRegulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride. This rate including cost of materialincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work. But excluding labour charges. |
| 1814 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega.This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1815 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT. This rate including cost of materialall labour chargesincidental chargesetc.complete as per IE ruleand as directed by the departmental officer in charge of work |
| 1816 | Supply and fixing of 20W, 2400 lumens, T8 not lessthan 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K- 5700K, minimum CRI>70, etc., as per IS 10322 (Part5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category |
| 1817 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete |
| 1818 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete |
| 1819 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 1820 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks as per SS and as directed by the departmental officer incharge of work . |
| 1821 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke |
| 1822 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 1823 | Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors |
| 1824 | Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors. |
| 1825 | Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work. |
| 1826 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 1827 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 1828 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 1829 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 1830 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg |
| 1831 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete |
| 1832 | 25 mm dia nominal bore -from tank to jn forof individual lines |
| 1833 | 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 1834 | 15 mm dia nominal bore -for internal |
| 1835 | S&F of GI &GM fittings |
| 1836 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 1837 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 1838 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 1839 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 1840 | S& F GI union Ist Quality |
| 1841 | 12.70mm GI union |
| 1842 | 19.05mm GI union |
| 1843 | 25.40mm GI union |
| 1844 | For septic Tank |
| 1845 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth by manual means upto 3.00m depth |
| 1846 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling.This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1847 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 1848 | Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss for Septic tank walls as directed by the departmental officer incharge of work . |
| 1849 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside for Septic tank walls as directed by the departmental officer incharge |
| 1850 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for Septic tank as directed by the departmental officer incharge |
| 1851 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1852 | Errection of 250 KVA Transformer atintermediate sump with Transformer yard 15.00x12.00m |
| 1853 | Supply and erection of 7.5m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1854 | Supply of 11 KV 200A Gang operated Air break disconnecting switch complete with tandom bar, operating pipe, handle with badlock arrangements, 11 KV insulators etc This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1855 | Supply and erection of 11 KV Horn gap fuse units complete with insulators, arcing horn etc.,This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1856 | Supply and erection of 9 KV 5 KA auto valve distribution class lighting arresters suitable for use on 3 Ph. 11 KV 50 Hz system.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1857 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1858 | Supply and erection of 11 KV Pin Inuslators complete with GI pins and top clamps This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1859 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1860 | Providing stay sets for thestructures complete with stay wire 11 KV guy insulators. Stay rod bow, thimble etx., This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1861 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1862 | A) Earth Electrodes |
| 1863 | B) 25 x 3 mm HDB copper flat |
| 1864 | C) Epoxy insulators |
| 1865 | D) No.\"8\" SWG Copper wire. |
| 1866 | Supply and erection of 250KVA, 11KV/433 V, DY-11 Vectro group, out door type, plinth mounting type, Hint /make transformer with bushings on HT side and cable entry box on L V side to received 1.1 KV grade cable with all standard accessories transformer oil. tansformer having copper wound natural cooled with all standard accessories This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1867 | Supply and laying of 3.5 core x 400 sq.mm, 1.10 KV grade PVC insulated and armoured cable with alminium conductors This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1868 | MAIN PANEL, BOARD.LT Sheet steelclad, free standing, floor mounting unitized, Duat and vermin proof Indoor, Cubicle powder coated panel board made out of 16 SWG CRCA sheet sheetable for use 3 ph, 440v, 50 Hz. System and comprising, complete with busbars of adeeequate capacity, interconnections,control wiring etc..as required.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1869 | Iicoming |
| 1870 | a) . 630A TPN SFU for main switch This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1871 | b) . 630 A pole change over switch This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1872 | c) one setMetering Panel Comprisinga). 1( 0-500V) 96mm.SQ.flush type Digital Voltmeter.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1873 | d) 3 way any off Voltmeter Selector Switch This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1874 | e). ( 0-250A) 96mm SQ.flush type digital Ammeter This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1875 | f). 3 way any off Ammeter SelectorThis rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1876 | g).3RYB Phase indication lamps with leds This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1877 | h).3-200/5A ration bar primary type current tranformers. (Alluminium busbar) This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1878 | Out-Going |
| 1879 | 250A TPN SFUs for CW pump house motors.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1880 | 250 A TPN SFUs for compressor/mechanical equipments This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1881 | 250 A TPN SFUs for low lift sump Raw water motors.This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1882 | 160 A TPN SFUs for Space This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1883 | 160a TPN SFUs fir lighting section This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1884 | 160 A 4 poles change over switch for lighting section This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1885 | .KWH digital meter fro lighting section This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1886 | 4 nos-32 amps TPN Switch with HRC fuses and 1 No.10 KVAR capacitor bank total KVAR-40 This rate including cost of material and all bour charges, transporttion other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1887 | 250KV.LT/Transformer transportation, Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. |
| 1888 | Transformer yard at proposed intermediate sump Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means |
| 1889 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss and as directed by the departmental officer incharge of work . |
| 1890 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., completeand as directed by the departmental officer incharge of work . |
| 1891 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete as follosws |
| 1892 | column footings |
| 1893 | Columns1.20-0.10-0.10-0.30+1.80 |
| 1894 | Plinth beam2(15+12)=54-gate3.00=51.00 |
| 1895 | Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., and conveyance of maerials, all labour charges, scaffolding, watering etc complete as per ss and as directed by the departmental officer incharge of work (in and out side) |
| 1896 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 1897 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). |
| 1898 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete |
| 1899 | Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss |
| 1900 | supply and filling the transformer yard with 40mm HBG metal m/c. This rate including cost of material, spreading charges, sectionng, other incidental charges etc., as directed by the departmental officer in charge of work |
| 1901 | Fillingsite of proposed 13.00 MLD site 60x50m |
| 1902 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using gravel payment made as per level paymentNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth |
| 1903 | Providing LT electrical power line from WTP to intake well pumps |
| 1904 | Cost data per KM of LT 3 Ph 4 wirelinehorizantal formation with 3x55 sqmm +1x34 sq mm AAAC conductor over 8.00m PSCC poles at 65m span,75 kg/sqm wind pressure working load 140 kgs8.00m PSCC PolesLT 3 Phase cross armsBack clampStay set complete55 sqmm conductor34 sqmmconductorshackle insulator with metal partsLT pin insulator with pinCI kerb nobConcreting of poles, stay sets and base concretingMis .items like coil earthing,pipe earthing,danger,bolts and nuts etcAmount Paybale AP Transco on Receipt of Invoice from the APTRANSCO are as directed by the depaartmental officer incharge of work |
| 1905 | Construction of Compound wall and fencingto Head water works 100m compound wall ,200m fencing |
| 1906 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH |
| 1907 | Crusher Stone Dust Filling of foundation trenches of Compound wall as per drawing and technical specification watering, ramming in Clause 305.3.9 MORD & 304 MORTH as per SS and as directed by the departmental officer incharge of work . |
| 1908 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture including cost and conveyance of all materials, labour charges, machine mixing charges, curingcharges etc., complete as per S.S.and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 1909 | VRCC M-25 Design l mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shutteing for RAFT.( with Skin reinforcement) |
| 1910 | VRCC M-25 Design l mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shutteing for Retaing Walls ( with Skin reinforcement) |
| 1911 | Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded. |
| 1912 | Bailing out water from the trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper upto 5HP capacity pumps as per SS and as directed by the departmental officer incharge of work . |
| 1913 | Construction of 800 KLELSR with 18m stagingat Govt collegezone -II |
| 1914 | Construction of ELSR With the following specification800 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 1915 | All concrete components shall be designed with M30 Design Mix proportion |
| 1916 | The foundations shall be designed for Annular Raft Footings. |
| 1917 | Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof. |
| 1918 | The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings. |
| 1919 | The above rates adopted for a wind pressure upto \"350 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5% |
| 1920 | The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones |
| 1921 | The basic rates shall be increased by 33 1/3% for Zone-III of seismic zones |
| 1922 | The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KLThe ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 1923 | i) Pipe connections & Specials with D.I materials |
| 1924 | All pipe conections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.The Valves for above pipe connections also shall be of DI material of PN16All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall be of DI material |
| 1925 | The sizes of the verticals for ELSR/OHSR shall be: |
| 1926 | Above 1000KL threerows columns shall be provided |
| 1927 | For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm diaOver Flow pipe - 350m diaScour Pipe - 200mm dia |
| 1928 | For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm diaOver Flow pipe - 450m diaScour Pipe - 200mm dia |
| 1929 | For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm diaOver Flow pipe - 500m diaScour Pipe - 200mm dia |
| 1930 | Manhole Frames & Covers |
| 1931 | All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers |
| 1932 | CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos |
| 1933 | RCC Finial ventilator with fly/bird protection with GI mesh - 1 No. |
| 1934 | RCC precast ladders of 0.60 m width - 2 Nos. |
| 1935 | RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 1936 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry |
| 1937 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop. |
| 1938 | Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height,with top railing of 40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an interval not more than of 1.00m c/c. |
| 1939 | Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No). |
| 1940 | Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 1941 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards. |
| 1942 | Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 1943 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased |
| 1944 | Note:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted |
| 1945 | Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 1946 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 1947 | 800 KLELSR |
| 1948 | deduct items covered under SCADA |
| 1949 | inlet sluice valve 250mm |
| 1950 | out let sluice valve 350mm |
| 1951 | inlet non return valve 250mm |
| 1952 | lowering of valves 250 mm dia |
| 1953 | lowering of valves 350 mm dia |
| 1954 | jointingof valves 250 mm dia |
| 1955 | jointingof valves350 mm dia |
| 1956 | Construction of 1000 KLELSR with 18m stagingat santha marketzone -III |
| 1957 | Construction of ELSR With the following specification1000 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 1958 | All concrete components shall be designed with M30 Design Mix proportion |
| 1959 | The foundations shall be designed for Annular Raft Footings. |
| 1960 | Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof. |
| 1961 | The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings. |
| 1962 | The above rates adopted for a wind pressure upto \"350 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5% |
| 1963 | The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones |
| 1964 | The basic rates shall be increased by 33 1/3% for Zone-III of seismic zones |
| 1965 | The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KLThe ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 1966 | i) Pipe connections & Specials with D.I materials |
| 1967 | All pipe conections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.The Valves for above pipe connections also shall be of DI material of PN16All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall be of DI material |
| 1968 | The sizes of the verticals for ELSR/OHSR shall be: |
| 1969 | Above 1000KL threerows columns shall be provided |
| 1970 | For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm diaOver Flow pipe - 350m diaScour Pipe - 200mm dia |
| 1971 | For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm diaOver Flow pipe - 450m diaScour Pipe - 200mm dia |
| 1972 | For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm diaOver Flow pipe - 500m diaScour Pipe - 200mm dia |
| 1973 | Manhole Frames & Covers |
| 1974 | All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers |
| 1975 | CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos |
| 1976 | RCC Finial ventilator with fly/bird protection with GI mesh - 1 No. |
| 1977 | RCC precast ladders of 0.60 m width - 2 Nos. |
| 1978 | RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 1979 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry |
| 1980 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop. |
| 1981 | Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height,with top railing of 40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an interval not more than of 1.00m c/c. |
| 1982 | Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No). |
| 1983 | Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 1984 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards. |
| 1985 | Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 1986 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased |
| 1987 | Note:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted |
| 1988 | Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 1989 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 1990 | 1000 KLELSR |
| 1991 | deduct items covered under SCADA |
| 1992 | inlet sluice valve 350mm |
| 1993 | out let sluice valve 350mm |
| 1994 | inlet non return valve350mm |
| 1995 | lowering of valves 350 mm dia |
| 1996 | lowering of valves 350 mm dia |
| 1997 | jointingof valves 250 mm dia |
| 1998 | jointingof valves350 mm dia |
| 1999 | Construction of 900 KLELSR with 18m stagingat Balaji Town shipzone -IV |
| 2000 | Construction of ELSR With the following specification900 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 2001 | All concrete components shall be designed with M30 Design Mix proportion |
| 2002 | The foundations shall be designed for Annular Raft Footings. |
| 2003 | Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof. |
| 2004 | The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings. |
| 2005 | The above rates adopted for a wind pressure upto \"350 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5% |
| 2006 | The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones |
| 2007 | The basic rates shall be increased by 33 1/3% for Zone-III of seismic zones |
| 2008 | The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KLThe ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 2009 | i) Pipe connections & Specials with D.I materials |
| 2010 | All pipe conections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.The Valves for above pipe connections also shall be of DI material of PN16All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall be of DI material |
| 2011 | The sizes of the verticals for ELSR/OHSR shall be: |
| 2012 | Above 1000KL threerows columns shall be provided |
| 2013 | For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm diaOver Flow pipe - 350m diaScour Pipe - 200mm dia |
| 2014 | For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm diaOver Flow pipe - 450m diaScour Pipe - 200mm dia |
| 2015 | For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm diaOver Flow pipe - 500m diaScour Pipe - 200mm dia |
| 2016 | Manhole Frames & Covers |
| 2017 | All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers |
| 2018 | CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos |
| 2019 | RCC Finial ventilator with fly/bird protection with GI mesh - 1 No. |
| 2020 | RCC precast ladders of 0.60 m width - 2 Nos. |
| 2021 | RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 2022 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry |
| 2023 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop. |
| 2024 | Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height,with top railing of 40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an interval not more than of 1.00m c/c. |
| 2025 | Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No). |
| 2026 | Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 2027 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards. |
| 2028 | Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 2029 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased |
| 2030 | Note:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted |
| 2031 | Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 2032 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 2033 | 900 KLELSR |
| 2034 | deduct items covered under SCADA |
| 2035 | inlet sluice valve 250mm |
| 2036 | out let sluice valve 350mm |
| 2037 | inlet non return valve 250mm |
| 2038 | lowering of valves 250 mm dia |
| 2039 | lowering of valves 350 mm dia |
| 2040 | jointingof valves 250 mm dia |
| 2041 | jointingof valves350 mm dia |
| 2042 | Construction of 800 KLELSR with 18m stagingat Upperamettazone -V with Seismic analysis. |
| 2043 | Construction of ELSR With the following specification800 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 2044 | All concrete components shall be designed with M30 Design Mix proportion |
| 2045 | The foundations shall be designed for Annular Raft Footings. |
| 2046 | Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof. |
| 2047 | The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings. |
| 2048 | The above rates adopted for a wind pressure upto \"350 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5% |
| 2049 | The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones |
| 2050 | The basic rates shall be increased by 33 1/3% for Zone-III of seismic zones |
| 2051 | The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KLThe ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 2052 | i) Pipe connections & Specials with D.I materials |
| 2053 | All pipe conections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.The Valves for above pipe connections also shall be of DI material of PN16All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall be of DI material |
| 2054 | The sizes of the verticals for ELSR/OHSR shall be: |
| 2055 | Above 1000KL threerows columns shall be provided |
| 2056 | For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm diaOver Flow pipe - 350m diaScour Pipe - 200mm dia |
| 2057 | For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm diaOver Flow pipe - 450m diaScour Pipe - 200mm dia |
| 2058 | For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm diaOver Flow pipe - 500m diaScour Pipe - 200mm dia |
| 2059 | Manhole Frames & Covers |
| 2060 | All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers |
| 2061 | CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos |
| 2062 | RCC Finial ventilator with fly/bird protection with GI mesh - 1 No. |
| 2063 | RCC precast ladders of 0.60 m width - 2 Nos. |
| 2064 | RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 2065 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry |
| 2066 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop. |
| 2067 | Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height,with top railing of 40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an interval not more than of 1.00m c/c. |
| 2068 | Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No). |
| 2069 | Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 2070 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards. |
| 2071 | Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 2072 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased |
| 2073 | Note:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted |
| 2074 | Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 2075 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 2076 | 800 KLELSR |
| 2077 | deduct items covered under SCADA |
| 2078 | inlet sluice valve 250mm |
| 2079 | out let sluice valve 350mm |
| 2080 | inlet non return valve 250mm |
| 2081 | lowering of valves 250 mm dia |
| 2082 | lowering of valves 350 mm dia |
| 2083 | jointingof valves 250 mm dia |
| 2084 | jointingof valves350 mm dia |
| 2085 | Construction 1000 KL GLSR Hill lock near Rajivi nagar zone-I |
| 2086 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- for the following depth |
| 2087 | for GLSR foundations 0-3.00m Machanical means |
| 2088 | for GLSR foundations 3.00-6.00m Machanical means |
| 2089 | Mechanical means 3 to 6 metres in ordinary soils |
| 2090 | Manual Means 3 to 6 metres in ordinary soils |
| 2091 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1) |
| 2092 | Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations bed concrete as directed by the departmental officer incharge of work . |
| 2093 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer as follows |
| 2094 | Raft |
| 2095 | For side walls circular 0.30m thick below GL |
| 2096 | For side walls circular 0.30m thick below GL |
| 2097 | For side walls circular 0.30m thick above GL |
| 2098 | Columns 0.30 x 0.30m 3.60-0.30 |
| 2099 | Roof beams |
| 2100 | Roof slab0.15m thick 0.786x(18.600^2-7.00^2) |
| 2101 | Roof dome slab 0.15m thick |
| 2102 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 2103 | Providing Painting walls with snowcern or equivalent paint two coats by using approved water proof paint grade-1 over one coat prime coat by using cement primary coat by using cement primer making 3 coats including cost of Colourwashing two coats Using snowcem including cost cost of material and all bour charges, transporttion other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2104 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities for Man hole cover and ladder as per SS and as directed by the departmental officer incharge of work . |
| 2105 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 2106 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade-3 tire, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. |
| 2107 | Inlet,out let,scour and over flow arrengements |
| 2108 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation,Excluding Taxes and Duties etc and other incidental charges etc., complete as per as directed by the departmental officer incharge of work . as follows |
| 2109 | 250 mm dia 2.00m long DIDF pipes |
| 2110 | 250 mm dia 1.00m long DIDF pipes |
| 2111 | 150 mm dia 2.00m long DIDF pipes |
| 2112 | 150 mm dia 1.00m long DIDF pipes |
| 2113 | 350 mm dia 2.00m long DIDF pipes |
| 2114 | 350 mm dia 1.00m long DIDF pipes |
| 2115 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions upto 500mm dia as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. etc.,complete as per S.S. and as directed by the departmental authorities. |
| 2116 | Manufacture, Supply and delivery of 150mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 |
| 2117 | Labour charges for 150mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. |
| 2118 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, as per BIS No.3114/94.as follosws |
| 2119 | 350 mm dia |
| 2120 | 250 mm dia |
| 2121 | 150 mm dia |
| 2122 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as follows |
| 2123 | 350 mm dia |
| 2124 | 250 mm dia |
| 2125 | 150 mm dia |
| 2126 | Construction of Sluice Valve chambers with CC M25 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. This rate is including cost of material and all labour charges with Earthwork, sand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2127 | 350 mm dia |
| 2128 | 250 mm dia |
| 2129 | 150 mm dia |
| 2130 | Supply and fixing of Stain less steel ladder made 304 grade steel out of suitable sections for access from floor slab to Base slab.This rate is including cost of material, transportaton and all labour charges, site welding and other incidental charges etc., completeas directed by the departmental officer incharge of work . |
| 2131 | Laying of 500mm,400mm,350 mm,250 mm dia . DI K9combined Pumpingmains from clear water sump at HWW to intermediate sump at Uppalametta andproposed 1000 KLELSR at Santha Market zone-III andproposed 900 KLELSR at Saibalaji town shipzone-iv |
| 2132 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 2133 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines by uing chissiling, compresion, hiring of machinery, fuel charges and incidentl charges as per the ditections of the departmental authorities. |
| 2134 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines by uing chissiling, compresion, hiring of machinery, fuel charges and incidentl charges as per the ditections of the departmental authorities. |
| 2135 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. as follows |
| 2136 | Mechanical means up to 3 metres depth in ordinary soils |
| 2137 | Manual means up to 3 metres depth in ordinary soils |
| 2138 | Maechanical means up to 3 metres depth in ordinary rock not requiring blasting |
| 2139 | Filling sand bedding in pipe line bed as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHetc., complete. This rate including cost of all materials, all labour charges, watering, ranning other incidental charge etc complete as per SS and as directed by the Departmental officer in charge of the work. But excluding seigniorage charge. |
| 2140 | Manufacture supply delivery,of D.I K9 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete as per SS and as directed by the departmental officer incharge of work . |
| 2141 | 500mm dia. DI k9 combined Pumpingmain from ProposedClear water sump to Juction near JRG Community hall |
| 2142 | 400mm dia. DI k9 combined Pumpingmainfrom Juction near JRG Community hall to Intermediate sump near Uppalametta |
| 2143 | 350mm dia. DI k9 combined Pumpingmainfrom Juction near JRG Community hall to jn of proposed 1000 KLELSR at Santha Market zone-III |
| 2144 | 250mm dia. DI k9Pumpingmainfrom jn of proposed 1000 KLELSR at Santha Market zone-III to proposed 900 KLELSR at Saibalaji town shipzone-iv |
| 2145 | Supply and delivery of D.I D/F Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and as per SS and as directed by the departmental officer incharge of work . as follows |
| 2146 | 300 mm dia on 500 mm lines |
| 2147 | 200 mm dia on 350 mm lines |
| 2148 | 150 mm dia on 250 mm lines |
| 2149 | for sluice valves,non return valves and flow meters |
| 2150 | 500 mm dia 1.00m long DI DF pipes for sluice and non return valves and flow meter 5+1+1 |
| 2151 | 400 mm dia 1.00m long DI DF pipes for sluice and non return valves 1+1+1 |
| 2152 | 350 mm dia 1.00m long DI DF pipes for sluice and non return valves 3+2 |
| 2153 | 250 mm dia 1.00m long DI DF pipes for sluice and non return valves 4+2 |
| 2154 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. upto 500mm dia |
| 2155 | Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.as follows |
| 2156 | 500mm dia. DI k9 combined Pumpingmain from ProposedClear water sump to Juction near JRG Community hall |
| 2157 | 400mm dia. DI k9 combined Pumpingmainfrom Juction near JRG Community hall to Intermediate sump near Uppalametta |
| 2158 | 350mm dia. DI k9 combined Pumpingmainfrom Juction near JRG Community hall to jn of proposed 1000 KLELSR at Santha Market zone-III |
| 2159 | 250mm dia. DI k9Pumpingmainfrom jn of proposed 1000 KLELSR at Santha Market zone-III to proposed 900 KLELSR at Saibalaji town shipzone-iv |
| 2160 | Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. As follows |
| 2161 | 500 mm dia DI K9 |
| 2162 | 400 mm dia DI K9 |
| 2163 | 350 mm dia DI K9 |
| 2164 | 250 mm dia DI K9 |
| 2165 | Supply, Delivery of 500mm dia D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel and including transportation, etc. complete ISI marked.PN 1.6 (MPa) |
| 2166 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves sh ould be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538, duties and including transportation. PN1.6 Mpa -as per SS and as directed by the departmental officer incharge of work . |
| 2167 | 400 mm dia sluice valves |
| 2168 | 350 mm dia sluice valves |
| 2169 | 250 mm dia sluice valves |
| 2170 | 100 mm dia for air valves |
| 2171 | 300 mm dia sluice valves for scour |
| 2172 | 200 mm dia sluice valves for scour |
| 2173 | 150 mm dia sluice valves for scour |
| 2174 | Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S as follows |
| 2175 | 100mm dia. PN 16 on 500 mm dia |
| 2176 | 100mm dia. PN 16 on 400 mm dia |
| 2177 | 80mm dia. PN 16 on 350 mm dia |
| 2178 | 80mm dia. PN 16 on 250 mm dia |
| 2179 | Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 as follows |
| 2180 | 500mm dia DI |
| 2181 | 400 mm dia |
| 2182 | 350mm dia DI |
| 2183 | 250mm dia DI |
| 2184 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. as per SS and as directed by the departmental officer incharge of work . |
| 2185 | 500 mm dia sluice valves |
| 2186 | 400 mm dia sluice valves |
| 2187 | 350 mm dia sluice valves |
| 2188 | 250 mm dia sluice valves |
| 2189 | 100 mm dia for air valves |
| 2190 | 300 mm dia sluice valves for scour |
| 2191 | 200 mm dia sluice valves for scour |
| 2192 | 150 mm dia sluice valves for scour |
| 2193 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.as per SS and as directed by the departmental officer incharge of work . |
| 2194 | 100mm dia. PN 16 on 500 mm dia |
| 2195 | 100mm dia. PN 16 on 400 mm dia |
| 2196 | 80mm dia. PN 16 on 350 mm dia |
| 2197 | 80mm dia. PN 16 on 250 mm dia |
| 2198 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as per SS and as directed by the departmental officer incharge of work . as follos |
| 2199 | 500mm dia |
| 2200 | 400 mm dia |
| 2201 | 350 mm dia |
| 2202 | 300 mm dia |
| 2203 | 250 mm dia |
| 2204 | 200 mm dia |
| 2205 | 150mm dia |
| 2206 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as folows |
| 2207 | 500 mm dia |
| 2208 | 400 mm dia |
| 2209 | 350 mm |
| 2210 | 300 mm dia |
| 2211 | 250 mm dia |
| 2212 | 200 mm dia |
| 2213 | 150 mm dia |
| 2214 | 100 mm dia |
| 2215 | 80 mm dia air valves |
| 2216 | Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. |
| 2217 | Construction of Anchor blockswith M20 concrete using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 2218 | Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS for pipe line trench cutting portion .This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2219 | Construction of Sluice Valve chambers with CC M25 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2220 | For 500mm dia. Sluice Valves and swing check valves |
| 2221 | For 400mm dia. Sluice Valves and swing check valves |
| 2222 | For 350mm dia. Sluice Valves and swing check valves |
| 2223 | For 250mm dia. Sluice Valves |
| 2224 | Construction of Scour Valve chambers with CC M25 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2225 | For 300mm dia. Scour Valves |
| 2226 | For 200mm dia. Scour Valves |
| 2227 | For 150mm dia. Scour Valves |
| 2228 | Construction of Air Valve chambers with RCC M30 mix suitable to the Scour Valve including cost and conveyance of all materials This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2229 | 100mm dia. PN 16 on 500 mm dia |
| 2230 | 100mm dia. PN 16 on 400 mm dia |
| 2231 | 80mm dia. PN 16 on 350 mm dia |
| 2232 | 80mm dia. PN 16 on 250 mm dia |
| 2233 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts |
| 2234 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 2235 | Manufacture, Supply and delivery of MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates, Taxes and transportation charges etc., complete |
| 2236 | 500mm dia |
| 2237 | 400mm dia |
| 2238 | 350mm dia |
| 2239 | 250mm dia |
| 2240 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete as directed by the departmental officer incharge of work . |
| 2241 | Manufacture, supply and delivery at work site 500mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse with cement lime, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge |
| 2242 | Laying of ,250 mm dia . DI K9 Pumpingmains from intermediate sump at Uppalametta toproposed 800 KL ELSR at Uppalametta zone-V |
| 2243 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches with the following depth |
| 2244 | Mechanical means up to 3 metres depth in ordinary soils |
| 2245 | Manual means up to 3 metres depth in ordinary soils |
| 2246 | Maechanical means up to 3 metres depth in ordinary rocknot rquiring blasting |
| 2247 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench This rate is including cost of material and all labour charges and other incidental charges etc., complete and as directed by the departmental officer incharge of work . |
| 2248 | Manufacture supply delivery,of 250mm dia D.I K9 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,and other incidental charges etc., complete and as directed by the departmental officer incharge of work . |
| 2249 | Supply and delivery of 250mm dia 1.0m long D.I K9 D/F Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and other incidental charges etc., complete and as directed by the departmental officer incharge of work . |
| 2250 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. upto 500mm dia |
| 2251 | Lowering of 250mm dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 2252 | Jointing of 250mm dia D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 2253 | Manufacture, Supply and delivery of 250mm dia PN 1.6 DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 |
| 2254 | Supply, delivery and fixing in position of 80mm dia PN 1.6 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S |
| 2255 | Manufacture, Supply and delivery of250mm dia DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 |
| 2256 | Labour charges for 250mm dialowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. |
| 2257 | Labour charges for 80mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc. |
| 2258 | Lowering the 250mm dia C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per SS and as directed by the departmental officer incharge of work |
| 2259 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as follows |
| 2260 | 250 mm dia |
| 2261 | 80 mm dia air valves |
| 2262 | Construction of M25 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing centering, shuttering, all labour charges etc., complete. |
| 2263 | Construction of Anchor blockswith M25 concrete using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 2264 | Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2265 | Construction of Air Valve chambers with CC M30 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.SThis rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2266 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 2267 | Manufacture, Supply and delivery of 250mm dia MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes complete as per SS and as directed by the departmental officer incharge of work . |
| 2268 | Laying of ,250 mm dia . DI K9Pumpingmains from intermediate sump at Uppalametta toproposed 800 KL ELSR at Govt.college zone-II |
| 2269 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 2270 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2271 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2272 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. |
| 2273 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1) |
| 2274 | Manufacture supply delivery,of 250mm dia D.I K9 centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking, and other incidental charges etc., complete and as directed by the departmental officer incharge of work . |
| 2275 | Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and other incidental charges etc., complete and as directed by the departmental officer incharge of work . |
| 2276 | For scours 2.00mDIDF pipes 150mm dia |
| 2277 | 250 mm dia 1.00m long DI DF pipes for sluice and non return valve |
| 2278 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site as per S.S. and as directed by the departmental authorities. This rate including cost of material and alabour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., completeand as directed by the departmental officer incharge of work . upto 500mm dia |
| 2279 | Lowering of 250mm dia D.I. K9 socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 2280 | Jointing of 250mm dia D.I. K9. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 2281 | Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 as follows |
| 2282 | 250 mm dia sluice valves |
| 2283 | 150 mm dia sluice valves for scour |
| 2284 | Supply, delivery and fixing in position of 80mm dia PN 1.6 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S |
| 2285 | Manufacture, Supply and delivery of250mm dia PN 1.6 DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 |
| 2286 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.as per SS and as directed by the departmental officer incharge of work . As follows |
| 2287 | 250 mm dia sluice valves |
| 2288 | 150 mm dia sluice valves for scour |
| 2289 | Labour charges for fixing of 80mm dia Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc. |
| 2290 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. as follows |
| 2291 | 250 mm dia |
| 2292 | 150mm dia |
| 2293 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as follows |
| 2294 | 250 mm dia |
| 2295 | 150 mm dia |
| 2296 | 80 mm dia air valves |
| 2297 | Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing, centering, scaffolding etc., complete. |
| 2298 | Construction of Anchor blockswith M20 concrete using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 2299 | Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS for pipe line trench cutting portion .This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2300 | Construction of Sluice Valve chambers with CC M25 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2301 | Construction of Scour Valve chambers with CC M20 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2302 | Construction of Air Valve chambers with RCC M30 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S |
| 2303 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- |
| 2304 | Using Concrete mixture Restoration of CC road by Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 2305 | Manufacture, Supply and delivery of 250mm dia MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. complete |
| 2306 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete as per SS and as directed by the departmental officer incharge of work . as per the direction of APTRANSCO and by the departmental officer incharge of work . |
| 2307 | Laying of ,250 mm dia . DI K9 Pumpingmains from intermediate sump at Uppalametta to proposed 1000 KLGLSR at Rajivi Nagar zone-I |
| 2308 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 2309 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2310 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2311 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. as follows |
| 2312 | Mechanical means up to 3 metres depth in ordinary soils |
| 2313 | Manual means up to 3 metres depth in ordinary soils |
| 2314 | Maechanical means up to 3 metres depth in ordinary rock not requiring blasting |
| 2315 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling.This rate including cost of material and all lbour charges, watering, ramming and other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2316 | Manufacture supply delivery,of 250mm dia centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per SS and as directed by the departmental officer incharge of work . |
| 2317 | Supply and delivery of 250mm dia D.I D/F Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion as per SS and as directed by the departmental officer incharge of work . as follows |
| 2318 | For scours 2.00mDIDF pipes |
| 2319 | 250 mm dia 1.00m long DI DF pipes for sluice and non return valves |
| 2320 | Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. |
| 2321 | Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 2322 | Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 2323 | Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 |
| 2324 | 250 mm dia sluice valves |
| 2325 | 150 mm dia sluice valves for scour |
| 2326 | Supply, delivery and fixing in position of 80mm dia PN 1.6 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including and other incidentl charges labour charges for placing and fixing in position etc.complete as per S.S |
| 2327 | Manufacture, Supply and delivery of250mm dia PN 1.6 DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 |
| 2328 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.as follows |
| 2329 | 250 mm dia sluice valves |
| 2330 | 150 mm dia sluice valves for scour |
| 2331 | Labour charges for 80mm dia PN 1.6 fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.as follows |
| 2332 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 2333 | 250 mm dia |
| 2334 | 150mm dia |
| 2335 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as foolows |
| 2336 | 250 mm dia |
| 2337 | 150 mm dia |
| 2338 | 80 mm dia air valves |
| 2339 | Construction of M25 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. |
| 2340 | Construction of Anchor blockswith M25 concrete using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 2341 | Collection ,supply and spreading of crusher stone dust from approved quarries for road restoration including compaction and watering etc., complete ramming, all labour charge and other incidental charges |
| 2342 | Construction of Sluice Valve chambers with CC M25 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2343 | Construction of Scour Valve chambers with CC M25 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2344 | Construction of Air Valve chambers with CC M25 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.SThis rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. |
| 2345 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 2346 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 2347 | Manufacture, Supply and delivery of 250mm dia MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates and transportation charges etc., completeas per SS and as directed by the departmental officer incharge of work . |
| 2348 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete as directed by the departmental officer incharge of work . |
| 2349 | Manufacture, supply and delivery at work site 400mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse including cement, linning, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge |
| 2350 | Laying of 800mm dia.(10 mm thick plate) at State High wayforclear water pumping main 500 mm and 250 mmdia DIK9 ( for Horizantal boring) |
| 2351 | Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for laying of 800mm dia MS pipe line as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but including cost of encasing pipe as per the directon of the Highway authorities and as directed by the department authorities Engineer-in-cheif |
| 2352 | Construction of 600 mm sizeCC disposal drain from proposed WTP |
| 2353 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. as follows |
| 2354 | Mechanical means up to 3 metres depth in ordinary soils |
| 2355 | Manual means up to 3 metres depth in ordinary soils |
| 2356 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHas per SS and as directed by the departmental officer incharge of work . |
| 2357 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete for bed concrete CC Drain |
| 2358 | PCC M-15 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for CC drains |
| 2359 | Providing Instrumentation and Automation of the Pumping System, Supervisory Control and Data Acuasation System (SCADA) & Providing 2x7 water supply system at 1000 KL ELSR in Santha market of Zone-III |
| 2360 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer for Raw water and clear water pumping station |
| 2361 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.for Raw water and clear water pumping station |
| 2362 | Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and other incidental charges etc., complete for clear water pumping station |
| 2363 | Supply and delivery of250mm diaDI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor per SS and as directed by the department officer for Raw water and clear water control valve |
| 2364 | Supply and deliveryof 500mm dia separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc andetc., complete, and as directed by the dept., officer. |
| 2365 | Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, laborand other incidental charges etc., complete for clear water WTP |
| 2366 | Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor andother incidental charges etc., complete for clear water WTP |
| 2367 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and other incidental charges etc., complete for Raw water and clear water WTP |
| 2368 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor. and other incidental charges etc., complete for Raw water and clear water WTP |
| 2369 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. and other incidental charges etc., complete for Raw water and clear water WTP |
| 2370 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and as per SS and other incidental charges etc., complete for Raw water and clear water WTP |
| 2371 | Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour andand other incidental charges etc., complete for Raw water and clear water WTP as directed by the department officer. as follows |
| 2372 | Logic for RTU opeartaions:1. RTU panel for local operaion of the pumps in manual and Auto Mode.2. All the equipment like Pumps, PCC, MCC, VFD Control panels, Pump Control Valves, Vaccume Valve, Pressure and flow sensors connected to RTU through the cabling with necessary power and communication cables.3. The pumps can be opearte in Auto mode by the pumping sequence including monitor and opearte the Vacumization, SumpLevels, Suction, Delivery pressures, Pump Monitoting and PCV operating according to site conditions. 4. In Auto management, the pumps can be operate based on the field demand through control the VFD panels according to pump curves.5. Monitoring the suction and delivery pressures of the pumps and operate under limits assigned.6. Check all the reservoir demands and switch on and switch off the pumps according to demand under limits of pump curves.7. In manual opeartion, all the equiment can be run through PLC panel by individual operations.8.The RTU connected with SCADA for remote monitoring and operation.9. The RTU have a adequated facility to modify any sequence at any time demanded by the department incharge. |
| 2373 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and other incidental charges etc., complete as follows |
| 2374 | 150MM Dia Above Specification. For Reservoirs |
| 2375 | 200 MM Dia Above Specification.For Reservoirs |
| 2376 | Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and other incidental charges., complete, and as directed by the dept., officer.as follows |
| 2377 | 150MM Dia Above Specification.For Reservoirs |
| 2378 | 200 MM Dia Above Specification.For Reservoirs |
| 2379 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor and other incidental charges., complete, and as directed by the dept., officer.as follows |
| 2380 | 150MM Dia Above Specification.For Reservoirs |
| 2381 | 200 MM Dia Above Specification.For Reservoirs |
| 2382 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 2383 | 150MM Dia Above Specification.For Reservoirs |
| 2384 | 200 MM Dia Above Specification.For Reservoirs |
| 2385 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2386 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2387 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2388 | Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2389 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2390 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s inlets |
| 2391 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s |
| 2392 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s |
| 2393 | Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s |
| 2394 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s |
| 2395 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for various ELSR\"s |
| 2396 | Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 2100KL ELSR\"s |
| 2397 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 &1000KL ELSR\"s |
| 2398 | Supply ad delivery of 250mm dia M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges and other incidental, transportation, all labour charges. etc., complete and as directed by the dept., officer incharge of work |
| 2399 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2400 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2401 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2402 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2403 | Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site conditionand other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2404 | Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc., complete, and as directed by the dept., officer.incharge of work for pressure points at highest pont and lower pont and further ponts |
| 2405 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges including cost and conveyance of all material including transport and labor and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work for Inlet DMA 1 & 21000KL ELSR\"s |
| 2406 | Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labouretc., complete, and as directed by the dept., officer. for DN 15-PN-16 AMR compartible, Mechanical water metricNote: Detailesd technical specifications enclosed as Anexure-A. |
| 2407 | Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-B |
| 2408 | Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer. |
| 2409 | Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.a. Desktop PC Station with specification of 17 Processor, 8 GB Ram,-512 GB SSD, 1 Licensed OS, 21\" Screen with Mouse, keyboard, and relevant accessories make of LENOVO/HP/DELLb. 55\" LED Display make of Sony/Samsung/ LG or equilant with ethernet/HDMI/VGA 1 supported for front end view by connecting with PC in dual mode operation and View the SCADA screens with required cables and connectors etc., complete. c. Modem with specifications of Fibre Port having ILL, PON & Network Features, 1 Speed 100/1000, LAN Ports, Fibre port x 1 NO make of CISCO/HP/FF/ONV/PHOENIX/Dlink/Suggested by the telecom provider |
| 2410 | d. 3 KVA Stabilizer with specifications of 220 V.AC Input/ 220 V.AC output, necessary 1 terminal wires etc., complete completee. 3 KVA online ups with specifications of 220 V.AC Input/ 220 V.AC output, Static By 1 pass with isoltion transformer, Required Battery bank, make of Vertex/EATON/BPE/ NUMERIC/RIELLO/ENERTECH completef. 3 in one on line B/W A4 Lazer Jet printerg. Network for all local control stations and central station with registration with any 1 communication provider and payment of minimum one year subscription and establishment of communicationh.Establishment of Local SCADA station at Jangareddygudem Municipality with the above specifications. |
| 2411 | Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.Development and providing the WEB based SCADA for Operation and Monitoring by 1 the Individual ULB where implemented the Reservoir management to AMI management. (Expandable upto Source to end user)Development of front end view monitoring and operating application in Digital Twin 1 Job Mode with 3D & 20 model including designing, animation, drawings and integration of SCADA with field devices through MQTT/ MODBUS/ TCPIP protocol etc., completeDevelop, Supply, install and commissioning of customized WEB applications for Data 1 analytics, Visulation, Trends, Data auditing, generating the reports required by the customer at the time of commissioning |
| 2412 | Develop, Supply, install and commissioning of Anroid & 10\"s application for data 1 monitoring by through Mobi-APP as required by the customer at the time of commissioning completEstablishment of Local SCADA station at langareddygudem Municipality with the above specifications |
| 2413 | Construction of Clear Water SCADA Room 8.00 x 12.00 Size at WTP. |
| 2414 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.as follows |
| 2415 | Mechanical Means up to 3 Metres depth in Ordinary Soil |
| 2416 | Manual Means up to 3 Metres depth in Ordinary Soil |
| 2417 | Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101). |
| 2418 | Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5). |
| 2419 | Construction of Brick Masonary in C.M (1: 6) prop. Using 2nd class country bricks of size 23 X 11 X 7 IS 1077-1992 non modular size hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of and other incidental charges including labour for mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work. |
| 2420 | Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Septic tank Bed. |
| 2421 | Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Septic tank walls |
| 2422 | Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.as follows |
| 2423 | Footings |
| 2424 | Pedastals around Columns |
| 2425 | Columns Up to plinth |
| 2426 | Plinth Beams 300 x 400 |
| 2427 | Columns |
| 2428 | Up to First Floor Roof Level |
| 2429 | Beams 230 x 500 |
| 2430 | Lintels |
| 2431 | Sunshades |
| 2432 | Staircase slab 0.15 m thick |
| 2433 | RCC Slab 150mm thick |
| 2434 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for SCADA Room |
| 2435 | Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work as follows |
| 2436 | For Ground Floor Level |
| 2437 | For First Floor Level |
| 2438 | 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials. |
| 2439 | Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 2440 | Ground Floor |
| 2441 | For First Floor |
| 2442 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 2443 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 2444 | Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials. |
| 2445 | Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. |
| 2446 | Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. |
| 2447 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) This rate is including cost of material and all labour charges, scaffolding charges other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2448 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) This rate is including cost of material and all labour charges, scaffolding charges other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2449 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) This rate is including cost of material and all labour charges, scaffolding charges other incidental charges etc., complete as directed by the departmental officer incharge of work . |
| 2450 | Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door |
| 2451 | Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work. |
| 2452 | Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. |
| 2453 | Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm |
| 2454 | Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work |
| 2455 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages This rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2456 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages This rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2457 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential buildingThis rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2458 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour chargesThis rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2459 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour chargesThis rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2460 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.This rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2461 | supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., This rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2462 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc completeThis rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2463 | Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. This rate including cost of material and labour charges, transporttion charges, hiring of machinary, welding charges and other incidental charges etc., complete as per IE Rules and as directed by the departmental officer incharge of work . |
| 2464 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 2465 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL complete as per IE Rules and as directedby the departmental officer incharge of work |
| 2466 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.as per IE Rules and as directedby the departmental officer incharge of work |
| 2467 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 2468 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.as per IE Rules and as directedby the departmental officer incharge of work |
| 2469 | Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White as per IE Rules and as directedby the departmental officer incharge of work |
| 2470 | Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.as per IE Rules and as directedby the departmental officer incharge of work |
| 2471 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks as per SS and as directed by the departmental officer incharge of work . |
| 2472 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work |
| 2473 | SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 2474 | Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors |
| 2475 | Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors. |
| 2476 | Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work. |
| 2477 | Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors |
| 2478 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 2479 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 2480 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 2481 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 2482 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg |
| 2483 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete |
| 2484 | 25 mm dia nominal bore -from tank to jn forof individual lines and inlet |
| 2485 | 20 mm dia nominal bore -fromjn forof individual lines to toilets |
| 2486 | 15 mm dia nominal bore -for internal |
| 2487 | S&F of GI & GM fittings |
| 2488 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 2489 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 2490 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 2491 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 2492 | S& F GI union Ist Quality |
| 2493 | 12.70mm |
| 2494 | 19.05mm |
| 2495 | 25.40mm |
| 2496 | Distribution Network Including House Service Connections and Restoration of Trenches |
| 2497 | Laying new Distribution lineszone-I |
| 2498 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 2499 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 2500 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. completeas per SS and as directed by the departmental officer incharge of work . As follows |
| 2501 | 110mm dia. |
| 2502 | 160mm dia. |
| 2503 | 200mm dia. |
| 2504 | 315 mm dia. |
| 2505 | 355 mm dia. |
| 2506 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work |
| 2507 | a) Pipe ends - long neck |
| 2508 | 110mm dia. |
| 2509 | 160mm dia. |
| 2510 | 160 mm dia for Air TEEs |
| 2511 | 200mm dia. |
| 2512 | 200 mm dia for Air TEEs |
| 2513 | 315 mm dia. |
| 2514 | 315 mm dia for Air TEEs |
| 2515 | 355 mm dia |
| 2516 | 355 mm dia for Air TEEs |
| 2517 | 355 mm dia for bulk flow meter |
| 2518 | 110mm dia. |
| 2519 | 160mm dia. |
| 2520 | 160 mm dia for Air TEEs |
| 2521 | 200mm dia. |
| 2522 | 200 mm dia for Air TEEs |
| 2523 | 315 mm dia. |
| 2524 | 315 mm dia for Air TEEs |
| 2525 | 355 mm dia |
| 2526 | 355 mm dia for Air TEEs |
| 2527 | 355 mm dia for bulk flow meter |
| 2528 | 110mm dia. |
| 2529 | 160mm dia. |
| 2530 | 200mm dia. |
| 2531 | 110X125 mmdia |
| 2532 | 125x140 mm dia |
| 2533 | 140x160 mm dia |
| 2534 | 160x180 mm dia |
| 2535 | 180x200 mm dia |
| 2536 | 200x225 mm dia |
| 2537 | 225x250 mm dia |
| 2538 | 250x280 mm dia |
| 2539 | 280x315 mm dia |
| 2540 | 315x355 mm dia |
| 2541 | e) TEES |
| 2542 | 110mm dia. |
| 2543 | 160mm dia. |
| 2544 | 200mm dia. |
| 2545 | 315 mm dia. |
| 2546 | 355 mm dia |
| 2547 | F)Bends |
| 2548 | 110mm dia. |
| 2549 | 160mm dia. |
| 2550 | 200mm dia. |
| 2551 | 315 mm dia. |
| 2552 | 355 mm dia |
| 2553 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete and other incidental, transportation, all labour charges.,complete, and as directed by the dept., officer.incharge of work |
| 2554 | 110mm dia. |
| 2555 | 160mm dia. |
| 2556 | 200mm dia. |
| 2557 | 315 mm dia. |
| 2558 | 355 mm dia. |
| 2559 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 2560 | DIDF pipes for scours |
| 2561 | 100X2.00m on 110 dia mains for scours |
| 2562 | 100X2.00m on 160 dia mains for scours |
| 2563 | 100x1.00m long DF pipes for sluice valves |
| 2564 | 150X2.00mon 200 mm dia mains for scours |
| 2565 | 150x1.00m long DF pipes for sluice valves |
| 2566 | 200x1.00m long DF pipes for sluice valves |
| 2567 | 300x1.00m long DF pipes for sluice valves |
| 2568 | 350x1.00m long DF pipes for sluice valves |
| 2569 | 350x1.00m long DF pipes for bulk flow meter |
| 2570 | DI Specials up to 500mm dia including coast of material transportaion, other incdental charges etc., complete as directed by the dept., officer.incharge of work |
| 2571 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 other incidental charges, duties and includingas followtransportation. PN16 - |
| 2572 | 100 mm distrubution |
| 2573 | 150mm dia for distrubution |
| 2574 | 200mm dia for distrubution |
| 2575 | 300mm dia for distrubution |
| 2576 | 350mm dia for distrubution |
| 2577 | for scour |
| 2578 | 100mm diaon 110 mmdia mains |
| 2579 | 100mm diaon160 mm dia mains |
| 2580 | 150 mm dia on 200 mm dia lines |
| 2581 | Manufacture, supply and delivery of 80mm dia PN 1.6 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 2582 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 2583 | 100 mm distrubution |
| 2584 | 150mm dia for distrubution |
| 2585 | 200mm dia for distrubution |
| 2586 | 300mm dia for distrubution |
| 2587 | 350mm dia for distrubution |
| 2588 | 350 mm dia for bulk flow meter |
| 2589 | for scour |
| 2590 | 100mm diaon 110 mmdia mains |
| 2591 | 100mm diaon160 mm dia mains |
| 2592 | 150 mm dia on 200 mm dia lines |
| 2593 | Labour charges for 80mm dafixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 2594 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department.etc. complete as per S.S for finished item of work |
| 2595 | 100 mm distrubution |
| 2596 | 150mm dia for distrubution |
| 2597 | 200mm dia for distrubution |
| 2598 | 300mm dia for distrubution |
| 2599 | 350mm dia for distrubution |
| 2600 | for scour |
| 2601 | 100mm diaon 110 mmdia mains |
| 2602 | 100mm diaon160 mm dia mains |
| 2603 | 150 mm dia on 200 mm dia lines |
| 2604 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department.etc. complete as per S.S for finished item of worketc. complete as per S.S for finished item of work |
| 2605 | 80 mm dia on 160 mm pipe |
| 2606 | 80 mm dia on 200 mm pipe |
| 2607 | 80mm dia 315 mm pipe |
| 2608 | 80mm dia 355 mm pipe |
| 2609 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.As follows |
| 2610 | 100 mm |
| 2611 | 150 mm dia |
| 2612 | 200 mm dia |
| 2613 | 300 mm dia |
| 2614 | 350 mm dia |
| 2615 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 2616 | 80 mm dia |
| 2617 | 100 mm dia |
| 2618 | 150 mm dia |
| 2619 | 200 mm dia |
| 2620 | 300 mm dia |
| 2621 | 350 mm dia |
| 2622 | 400 mm dia |
| 2623 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 2624 | Cutting the CC road surface. The rate including cost of all labourcutting ,chargesincidental charges etc complete .This rate includingcost of all labour charge , hiring of machinery , fuil charges, wage of driver and other incidental chargestetc complete as per ss and a directed by the departmental officer in charges of work. |
| 2625 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental chargesThis rate includingcost of all labour charge , hiring of machinery , fuil charges, wage of driver and other incidental chargestetc complete as per ss and a directed by the departmental officer in charges of work. etc., complete as directed by the departmental officer in charge of the work. |
| 2626 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 2627 | Laying new Distribution lineszone-II |
| 2628 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 2629 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 2630 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S and as directed by the dept., officer.incharge of work |
| 2631 | 110mm dia. |
| 2632 | 160mm dia. |
| 2633 | 200mm dia. |
| 2634 | 315 mm dia. |
| 2635 | 355 mm dia. |
| 2636 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stackingetc.complete Treansmit risk other incidental charges etc., complete as per ss and as directed by the departmental officer incharge of work . |
| 2637 | a) Pipe ends - long neck |
| 2638 | 110mm dia. |
| 2639 | 160mm dia. |
| 2640 | 160 mm dia for Air TEEs |
| 2641 | 200mm dia. |
| 2642 | 200 mm dia for Air TEEs |
| 2643 | 315 mm dia. |
| 2644 | 315 mm dia for Air TEEs |
| 2645 | 355 mm dia |
| 2646 | 355 mm dia for Air TEEs |
| 2647 | 355 mm dia for bulk flow meter |
| 2648 | 110mm dia. |
| 2649 | 160mm dia. |
| 2650 | 160 mm dia for Air TEEs |
| 2651 | 200mm dia. |
| 2652 | 200 mm dia for Air TEEs |
| 2653 | 315 mm dia. |
| 2654 | 315 mm dia for Air TEEs |
| 2655 | 355 mm dia |
| 2656 | 355 mm dia for Air TEEs |
| 2657 | 355 mm dia for bulk flow meter |
| 2658 | c) End Caps |
| 2659 | 160mm dia. |
| 2660 | 200mm dia. |
| 2661 | 110X125 mmdia |
| 2662 | 125x140 mm dia |
| 2663 | 140x160 mm dia |
| 2664 | 160x180 mm dia |
| 2665 | 180x200 mm dia |
| 2666 | 200x225 mm dia |
| 2667 | 225x250 mm dia |
| 2668 | 250x280 mm dia |
| 2669 | 280x315 mm dia |
| 2670 | 315x355 mm dia |
| 2671 | e) TEES |
| 2672 | 200mm dia. |
| 2673 | 355 mm dia |
| 2674 | 110mm dia. |
| 2675 | 160mm dia. |
| 2676 | 200mm dia. |
| 2677 | 315 mm dia. |
| 2678 | 355 mm dia |
| 2679 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as follows |
| 2680 | 110mm dia. |
| 2681 | 160mm dia. |
| 2682 | 200mm dia. |
| 2683 | 315 mm dia. |
| 2684 | 355 mm dia. |
| 2685 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 2686 | DIDF pipes for scours |
| 2687 | 100X2.00m on 110 dia mains for scours |
| 2688 | 100X2.00m on 160 dia mains for scours |
| 2689 | 100x1.00m long DF pipes for sluice valves |
| 2690 | 150X2.00mon 200 mm dia mains for scours |
| 2691 | 150x1.00m long DF pipes for sluice valves |
| 2692 | 200x1.00m long DF pipes for sluice valves |
| 2693 | 300x1.00m long DF pipes for sluice valves |
| 2694 | 350x1.00m long DF pipes for sluice valves |
| 2695 | 350x1.00m long DF pipes for bulk flow meter |
| 2696 | Supply and delivery of Centrifugally Ductile Iron Fittingsconfiring to IS 9523/2000 having diamention Zinc coated externanly with incsidemortor lines a per ss and as directed by the departmental officer in charges of work. |
| 2697 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 other incidental charges and including transportation. PN16 - |
| 2698 | 100 mm distrubution |
| 2699 | 150mm dia for distrubution |
| 2700 | 200mm dia for distrubution |
| 2701 | 300mm dia for distrubution |
| 2702 | 350mm dia for distrubution |
| 2703 | for scour |
| 2704 | 100mm diaon 110 mmdia mains |
| 2705 | 100mm diaon160 mm dia mains |
| 2706 | 150 mm dia on 200 mm dia lines |
| 2707 | 150 mm dia on 250mm dia lines |
| 2708 | Manufacture, supply and delivery of 80mm dia PN1.6 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 2709 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as per SS and as directed by the departmental officer incharge of work . |
| 2710 | 100 mm distrubution |
| 2711 | 150mm dia for distrubution |
| 2712 | 200mm dia for distrubution |
| 2713 | 300mm dia for distrubution |
| 2714 | 350mm dia for distrubution |
| 2715 | 350 mm dia for bulk flow meter |
| 2716 | for scour |
| 2717 | 100mm diaon 110 mmdia mains |
| 2718 | 100mm diaon160 mm dia mains |
| 2719 | 150 mm dia on 200 mm dia lines |
| 2720 | Labour charges for fixing Kinetic Air Valves 80mm dia PN 1.6 with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete and as per SS and as directed by the departmental officer incharge of work . |
| 2721 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department.etc. complete as per S.S for finished item of work |
| 2722 | 100 mm distrubution |
| 2723 | 150mm dia for distrubution |
| 2724 | 200mm dia for distrubution |
| 2725 | 300mm dia for distrubution |
| 2726 | 350mm dia for distrubution |
| 2727 | for scour |
| 2728 | 100mm diaon 110 mmdia mains |
| 2729 | 100mm diaon160 mm dia mains |
| 2730 | 150 mm dia on 200 mm dia lines |
| 2731 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour chargesThis rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 2732 | 80 mm dia on 160 mm pipe |
| 2733 | 80 mm dia on 200 mm pipe |
| 2734 | 80mm dia 315 mm pipe |
| 2735 | 80mm dia 355 mm pipe |
| 2736 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as per SS and as directed by the departmental officer incharge of work . as follows |
| 2737 | 100 mm |
| 2738 | 150 mm dia |
| 2739 | 200 mm dia |
| 2740 | 300 mm dia |
| 2741 | 350 mm dia |
| 2742 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.as follows |
| 2743 | 80 mm dia |
| 2744 | 100 mm dia |
| 2745 | 150 mm dia |
| 2746 | 200 mm dia |
| 2747 | 300 mm dia |
| 2748 | 350 mm dia |
| 2749 | 400 mm dia |
| 2750 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental chargesincluding cost of labour charges, transporttion charges, hiring of machinary,fuil charges,wages of driveother incidental charges etc., complete as per sand as directed by the departmental officer incharge of work . etc., complete as directed by the departmental officer in charge of the work. |
| 2751 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges including cost of labour charges, transporttion charges, hiring of machinary,fuil charges,wages of driveother incidental charges etc., complete as per sand as directed by the departmental officer incharge of work . etc., complete as directed by the departmental officer in charge of the work. etc., complete as directed by the departmental officer in charge of the work. |
| 2752 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges including cost of labour charges, transporttion charges, hiring of machinary,fuil charges,wages of driveother incidental charges etc., complete as per sand as directed by the departmental officer incharge of work . etc., complete as directed by the departmental officer in charge of the work. etc., complete as directed by the departmental officer in charge of the work. |
| 2753 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 2754 | Laying new Distribution lineszone-III |
| 2755 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 2756 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S as per SS and as directed by the departmental officer incharge of work . As follkow |
| 2757 | 110mm dia. |
| 2758 | 160mm dia. |
| 2759 | 200mm dia. |
| 2760 | 315 mm dia. |
| 2761 | 355 mm dia. |
| 2762 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stackingetc.complete transmit risk other incidental,.,complete, as follows |
| 2763 | a) Pipe ends - long neck |
| 2764 | 110mm dia. |
| 2765 | 160mm dia. |
| 2766 | 160 mm dia for Air TEEs |
| 2767 | 200mm dia. |
| 2768 | 200 mm dia for Air TEEs |
| 2769 | 315 mm dia. |
| 2770 | 315 mm dia for Air TEEs |
| 2771 | 355 mm dia |
| 2772 | 355 mm dia for Air TEEs |
| 2773 | 355 mm dia for bulk flow meter |
| 2774 | b) MS Flanges |
| 2775 | 110mm dia. |
| 2776 | 160mm dia. |
| 2777 | 160 mm dia for Air TEEs |
| 2778 | 200mm dia. |
| 2779 | 200 mm dia for Air TEEs |
| 2780 | 315 mm dia. |
| 2781 | 315 mm dia for Air TEEs |
| 2782 | 315 mm dia for bulk flow meter |
| 2783 | 355 mm dia |
| 2784 | 355 mm dia for Air TEEs |
| 2785 | 355 mm dia for bulk flow meter |
| 2786 | c) End Caps |
| 2787 | 160mm dia. |
| 2788 | 200mm dia. |
| 2789 | 110X125 mmdia |
| 2790 | 125x140 mm dia |
| 2791 | 140x160 mm dia |
| 2792 | 160x180 mm dia |
| 2793 | 180x200 mm dia |
| 2794 | 200x225 mm dia |
| 2795 | 225x250 mm dia |
| 2796 | 250x280 mm dia |
| 2797 | 280x315 mm dia |
| 2798 | 315x355 mm dia |
| 2799 | e) TEES |
| 2800 | 110mm dia. |
| 2801 | 200mm dia. |
| 2802 | 355 mm dia |
| 2803 | F)Bends |
| 2804 | 160mm dia. |
| 2805 | 200mm dia. |
| 2806 | 315 mm dia. |
| 2807 | 355 mm dia |
| 2808 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to required pressure etc.complete as follows |
| 2809 | 110mm dia. |
| 2810 | 160mm dia. |
| 2811 | 200mm dia. |
| 2812 | 315 mm dia. |
| 2813 | 355 mm dia. |
| 2814 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. a follows |
| 2815 | DIDF pipes for scours |
| 2816 | 100X2.00m on 110 dia mains for scours |
| 2817 | 100X2.00m on 160 dia mains for scours |
| 2818 | 100x1.00m long DF pipes for sluice valves |
| 2819 | 150X2.00mon 200 mm dia mains for scours |
| 2820 | 150x1.00m long DF pipes for sluice valves |
| 2821 | 200x1.00m long DF pipes for sluice valves |
| 2822 | 300x1.00m long DF pipes for sluice valves |
| 2823 | 350x1.00m long DF pipes for sluice valves |
| 2824 | 350x1.00m long DF pipes for bulk flow meter |
| 2825 | Supply and delivery of centrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. |
| 2826 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -as per S.S and as directed by the departmental authorities. |
| 2827 | 100 mm distrubution |
| 2828 | 150mm dia for distrubution |
| 2829 | 200mm dia for distrubution |
| 2830 | 300mm dia for distrubution |
| 2831 | 350mm dia for distrubution |
| 2832 | 400mm dia for distrubution |
| 2833 | for scour |
| 2834 | 100mm diaon 110 mmdia mains |
| 2835 | 100mm diaon160 mm dia mains |
| 2836 | 150 mm dia on 200 mm dia lines |
| 2837 | 150 mm dia on 250mm dia lines |
| 2838 | Manufacture, supply and delivery of 80mm diaSingle Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 2839 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as per S.S and as directed by the departmental authorities. |
| 2840 | 100 mm distrubution |
| 2841 | 150mm dia for distrubution |
| 2842 | 200mm dia for distrubution |
| 2843 | 300mm dia for distrubution |
| 2844 | 350mm dia for distrubution |
| 2845 | 350 mm dia for bulk flow meter |
| 2846 | for scour |
| 2847 | 100mm diaon 110 mmdia mains |
| 2848 | 100mm diaon160 mm dia mains |
| 2849 | 150 mm dia on 200 mm dia lines |
| 2850 | Labour charges for 80mm dai fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 2851 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 2852 | 100 mm distrubution |
| 2853 | 150mm dia for distrubution |
| 2854 | 200mm dia for distrubution |
| 2855 | 250mm dia for distrubution |
| 2856 | 300mm dia for distrubution |
| 2857 | 350mm dia for distrubution |
| 2858 | for scour |
| 2859 | 100mm diaon 110 mmdia mains |
| 2860 | 100mm diaon160 mm dia mains |
| 2861 | 150 mm dia on 200 mm dia lines |
| 2862 | 150 mm dia on 250mm dia lines |
| 2863 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department.etc. complete as per S.S for finished item of work |
| 2864 | 80 mm dia on 160 mm pipe |
| 2865 | 80 mm dia on 200 mm pipe |
| 2866 | 80mm dia 315 mm pipe |
| 2867 | 80mm dia 355 mm pipe |
| 2868 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as per S.S for finished item of workas follows |
| 2869 | 100 mm |
| 2870 | 150 mm dia |
| 2871 | 200 mm dia |
| 2872 | 300 mm dia |
| 2873 | 350 mm dia |
| 2874 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.As follows |
| 2875 | 80 mm dia |
| 2876 | 100 mm dia |
| 2877 | 150 mm dia |
| 2878 | 200 mm dia |
| 2879 | 300 mm dia |
| 2880 | 350 mm dia |
| 2881 | 400 mm dia |
| 2882 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges including hire charges of machinery , dfuil charges , wages of driver and other incidental charges for pipe line cutting trench portion onlyetc., complete as directed by the departmental officer in charge of the work. |
| 2883 | Cutting the CC road surface. The rate including labour charges for cutting, incidental chargesincluding hire charges of machinery , dfuil charges , wages of driver and other incidental charges for pipe line cutting trench portion onlyetc., complete as directed by the departmental officer in charge of the work. |
| 2884 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental chargesincluding hire charges of machinery , dfuil charges , wages of driver and other incidental charges for pipe line cutting trench portion only etc., complete as directed by the departmental officer in charge of the work. |
| 2885 | Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 2886 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 2887 | Laying new Distribution lineszone-IV |
| 2888 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 2889 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 2890 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S as follows |
| 2891 | 110mm dia. |
| 2892 | 160mm dia. |
| 2893 | 200mm dia. |
| 2894 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as per SS and as directed by the departmental officer incharge of work . |
| 2895 | a) Pipe ends - long neck |
| 2896 | 110mm dia. |
| 2897 | 160mm dia. |
| 2898 | 160 mm dia for Air TEEs |
| 2899 | 200mm dia. |
| 2900 | 200 mm dia for Air TEEs |
| 2901 | 315 mm dia. |
| 2902 | 315 mm dia for Air TEEs |
| 2903 | 355 mm dia |
| 2904 | 355 mm dia for Air TEEs |
| 2905 | 355 mm dia for bulk flow meter |
| 2906 | b) MS Flanges |
| 2907 | 110mm dia. |
| 2908 | 160mm dia. |
| 2909 | 160 mm dia for Air TEEs |
| 2910 | 200mm dia. |
| 2911 | 200 mm dia for Air TEEs |
| 2912 | 315 mm dia. |
| 2913 | 315 mm dia for Air TEEs |
| 2914 | 355 mm dia |
| 2915 | 355 mm dia for Air TEEs |
| 2916 | 355 mm dia for bulk flow meter |
| 2917 | c) End Caps |
| 2918 | 160mm dia. |
| 2919 | d) Reducers |
| 2920 | 110X125 mmdia |
| 2921 | 125x140 mm dia |
| 2922 | 140x160 mm dia |
| 2923 | 160x180 mm dia |
| 2924 | 180x200 mm dia |
| 2925 | 200x225 mm dia |
| 2926 | 225x250 mm dia |
| 2927 | 250x280 mm dia |
| 2928 | 280x315 mm dia |
| 2929 | 315x355 mm dia |
| 2930 | F)Bends |
| 2931 | 160mm dia. |
| 2932 | 200mm dia. |
| 2933 | 315 mm dia. |
| 2934 | 355 mm dia |
| 2935 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to required pressure etc.completeas per SS and as directed by the departmental officer incharge of work . |
| 2936 | 110mm dia. |
| 2937 | 160mm dia. |
| 2938 | 200mm dia. |
| 2939 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. as follows |
| 2940 | 100X2.00m on 110 dia mains for scours |
| 2941 | 100X2.00m on 160 dia mains for scours |
| 2942 | 100x1.00m long DF pipes for sluice valves |
| 2943 | 150X2.00mon 200 mm dia mains for scours |
| 2944 | 150x1.00m long DF pipes for sluice valves |
| 2945 | 200x1.00m long DF pipes for sluice valves |
| 2946 | 350x1.00m long DF pipes for sluice valves |
| 2947 | 350x1.00m long DF pipes for bulk flow meter |
| 2948 | Supply and delivery of centrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authoritie |
| 2949 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. PN16 -as follows |
| 2950 | 100 mm distrubution |
| 2951 | 150mm dia for distrubution |
| 2952 | 200mm dia for distrubution |
| 2953 | 350mm dia for distrubution |
| 2954 | 400mm dia for distrubution |
| 2955 | for scour |
| 2956 | 100mm diaon 110 mmdia mains |
| 2957 | 100mm diaon160 mm dia mains |
| 2958 | 150 mm dia on 200 mm dia lines |
| 2959 | Manufacture, supply and delivery of 80mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 2960 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as per SS and as directed by the departmental officer incharge of work . |
| 2961 | 100 mm distrubution |
| 2962 | 150mm dia for distrubution |
| 2963 | 200mm dia for distrubution |
| 2964 | 350mm dia for distrubution |
| 2965 | 350 mm dia for bulk flow meter |
| 2966 | for scour |
| 2967 | 100mm diaon 110 mmdia mains |
| 2968 | 100mm diaon160 mm dia mains |
| 2969 | 150 mm dia on 200 mm dia lines |
| 2970 | Labour charges for fixing Kinetic Air Valves 80mm dia with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 2971 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 2972 | 100 mm distrubution |
| 2973 | 150mm dia for distrubution |
| 2974 | 200mm dia for distrubution |
| 2975 | 350mm dia for distrubution |
| 2976 | for scour |
| 2977 | 100mm diaon 110 mmdia mains |
| 2978 | 100mm diaon160 mm dia mains |
| 2979 | 150 mm dia on 200 mm dia lines |
| 2980 | 150 mm dia on 250mm dia lines |
| 2981 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 2982 | 80 mm dia on 160 mm pipe |
| 2983 | 80 mm dia on 200 mm pipe |
| 2984 | 80mm dia 355 mm pipe |
| 2985 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 2986 | 100 mm |
| 2987 | 150 mm dia |
| 2988 | 200 mm dia |
| 2989 | 350 mm dia |
| 2990 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 2991 | 80 mm dia |
| 2992 | 100 mm dia |
| 2993 | 150 mm dia |
| 2994 | 200 mm dia |
| 2995 | 300 mm dia |
| 2996 | 350 mm dia |
| 2997 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2998 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 2999 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 3000 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 3001 | Laying new Distribution lineszone-V |
| 3002 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 3003 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 3004 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S |
| 3005 | 110mm dia. |
| 3006 | 200mm dia. |
| 3007 | 315 mm dia. |
| 3008 | 355 mm dia. |
| 3009 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete |
| 3010 | a) Pipe ends - long neck |
| 3011 | 110mm dia. |
| 3012 | 160mm dia. |
| 3013 | 160 mm dia for Air TEEs |
| 3014 | 200mm dia. |
| 3015 | 200 mm dia for Air TEEs |
| 3016 | 315 mm dia. |
| 3017 | 315 mm dia for Air TEEs |
| 3018 | 355 mm dia |
| 3019 | 355 mm dia for Air TEEs |
| 3020 | 355 mm dia for bulk flow meter |
| 3021 | b) MS Flanges |
| 3022 | 110mm dia. |
| 3023 | 160mm dia. |
| 3024 | 160 mm dia for Air TEEs |
| 3025 | 200mm dia. |
| 3026 | 200 mm dia for Air TEEs |
| 3027 | 315 mm dia. |
| 3028 | 315 mm dia for Air TEEs |
| 3029 | 355 mm dia |
| 3030 | 355 mm dia for Air TEEs |
| 3031 | 355 mm dia for bulk flow meter |
| 3032 | d) Reducers |
| 3033 | 110X125 mmdia |
| 3034 | 125x140 mm dia |
| 3035 | 140x160 mm dia |
| 3036 | 160x180 mm dia |
| 3037 | 180x200 mm dia |
| 3038 | 200x225 mm dia |
| 3039 | 225x250 mm dia |
| 3040 | 250x280 mm dia |
| 3041 | 280x315 mm dia |
| 3042 | 315x355 mm dia |
| 3043 | F)Bends |
| 3044 | 160mm dia. |
| 3045 | 200mm dia. |
| 3046 | 315 mm dia. |
| 3047 | 355 mm dia |
| 3048 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to required pressure etc.complete |
| 3049 | 110mm dia. |
| 3050 | 200mm dia. |
| 3051 | 315 mm dia. |
| 3052 | 355 mm dia. |
| 3053 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 3054 | DIDF pipes for scours |
| 3055 | 100x1.00m long DF pipes for sluice valves |
| 3056 | 150X2.00mon 200 mm dia mains for scours |
| 3057 | 200x1.00m long DF pipes for sluice valves |
| 3058 | 250x1.00m long DF pipes for sluice valves |
| 3059 | 300x1.00m long DF pipes for sluice valves |
| 3060 | 350x1.00m long DF pipes for sluice valves |
| 3061 | 350x1.00m long DF pipes for bulk flow meter |
| 3062 | Supply and delivery of centrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authoritie |
| 3063 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 |
| 3064 | 100 mm distrubution |
| 3065 | 200mm dia for distrubution |
| 3066 | 350mm dia for distrubution |
| 3067 | for scour |
| 3068 | 150 mm dia on 200 mm dia lines |
| 3069 | Manufacture, supply and delivery of 80mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 3070 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as per SS and as directed by the departmental officer incharge of work |
| 3071 | 100 mm distrubution |
| 3072 | 200mm dia for distrubution |
| 3073 | 350mm dia for distrubution |
| 3074 | 350 mm dia for bulk flow meter |
| 3075 | for scour |
| 3076 | 150 mm dia on 200 mm dia lines |
| 3077 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 3078 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 3079 | 100 mm distrubution |
| 3080 | 200mm dia for distrubution |
| 3081 | 350mm dia for distrubution |
| 3082 | for scour |
| 3083 | 150 mm dia on 200 mm dia lines |
| 3084 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges This rate is including cost of material and all labour charges with Earthwork, asand bedding, VCC 1:4:8, RCC bedding and side wall, cover slab with suitble opening, cast stell as per type design approved by the department. etc. complete as per S.S for finished item of work |
| 3085 | 80 mm dia on 200 mm pipe |
| 3086 | 80mm dia 355 mm pipe |
| 3087 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. as follows |
| 3088 | 100 mm |
| 3089 | 150 mm dia |
| 3090 | 200 mm dia |
| 3091 | 350 mm dia |
| 3092 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. as follow |
| 3093 | 80 mm dia |
| 3094 | 100 mm dia |
| 3095 | 150 mm dia |
| 3096 | 200 mm dia |
| 3097 | 300 mm dia |
| 3098 | 350 mm dia |
| 3099 | 400 mm dia |
| 3100 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 3101 | Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe linesetc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 3102 | Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials etc.including cost of all labour charges ,hiring of machinery fuel charges ,wages of driver etc., complete as per the directions of departmental authorities. For pipe line trenches. |
| 3103 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 3104 | HSC Shifting and Provision for new HSCs |
| 3105 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 3106 | Providing house service connections on HDPE mains at other side in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 3107 | Providing house service connections on HDPE mains at other side in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 3108 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 3109 | Implementation of Environmental Management plan |
| 3110 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period atIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3111 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodatIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3112 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiodatIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3113 | Monitoring Costs : Operation Phase ( One year) |
| 3114 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period atIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3115 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodatIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3116 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiod atIntake well and pumping main, Filtration Plant/WTP, GLSR, ELSR\"s, Pumping main & Distribution network |
| 3117 | Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) |
| 3118 | Greenbelt development and maintenance in the surroundings / Buffer zone |
| 3119 | Health checkups and free medical distribution |
| 3120 | Awareness program/training |
| 3121 | Sprinkling of wateronce in a day fortwo years (excluding rainy days):400 days @ Rs.1000/trip |
| 3122 | Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc., |
| 3123 | Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge. |
| 3124 | Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual |
| 3125 | Operation and Maintenance for the Seven (7) Yearsincluding Defect Liability Period-From Source to ELSR\"s |
| 3126 | Engary man power skilled/ Semiskilled like operation, Electrician., pump operation machanic, helper,watch man , filer bed peration, Diploma Engineering, lab technician technical work inspector as per requriment .This rate including wagrs along with miunicipal allowance, cinveyance charges transportion to site including statutory provisions as per norm complete for sucessful Maintenance of the entire scheme and s directed by the departmental officer in charge sof work for 7yers including 2years Defect liabiliy period as follows. including Personal required for operating Intake/Offtake well/Pump houses |
| 3127 | Operator |
| 3128 | Fitter/Helper |
| 3129 | Watch man |
| 3130 | Personal required at operating Raw water rising mains |
| 3131 | Fitter/Helper |
| 3132 | Personal required at operating Water treatment plants & Sump |
| 3133 | Operator |
| 3134 | Fitter/Helper |
| 3135 | Lab Technician |
| 3136 | Electrician /Mechanic |
| 3137 | Watch man |
| 3138 | Personal required at operating Clear water rising mains and Distribution lines |
| 3139 | Fitter/Helper |
| 3140 | Personal required at operating Gravity mains |
| 3141 | Watch man |
| 3142 | Personal required at operating Service reservoirs |
| 3143 | Watch man |
| 3144 | Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines. |
| 3145 | 1st year |
| 3146 | Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement at 15 mg/lit |
| 3147 | 1st year |
| 3148 | Repairs to pumpsets & Water pipe lines(2 years after execution period) |
| 3149 | i) Replacement of bearings of pumpsets |
| 3150 | ii) Replacement of sleeves |
| 3151 | iii) Rewinding of Motors |
| 3152 | iv) Raw Water Motors |
| 3153 | Clear Water Motors |
| 3154 | iv)Replacement of glands of sluice valves |
| 3155 | v) Replacements of balls of Air valves |
| 3156 | vi) Greease |
| 3157 | vii) Gland Packing |
| 3158 | LEAKAGES |
| 3159 | Operation and Maintenance for the Seven (7) Yearsincluding Defect Liability Period-For Distribution network |
| 3160 | Personal required at operating distribution system |
| 3161 | Fitter/Helper |
| 3162 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete |
| 3163 | 110mm Dia |
| 3164 | 160mm Dia |
| 3165 | 200mm Dia |
| 3166 | 250mm Dia |
| 3167 | Local SCADA at ULB |
| 3168 | Jr. Service Engineer (Diploma Engineer)To asist to attend the service calls by the seniour service engineer |
| 3169 | Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the GVMC Officials for obtaining of required information when ever asks. |
| 3170 | Office assistant To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 3171 | Hiring of vehicle (4 wheeler)Rate as per G.O.MS.No.87Dated 01-06-2017. |
| 3172 | Replacement of necessary servicable materials(Reagents) for Chlorine Analysers*Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuets. |
| 3173 | Replacement of necessary tranducers for PH analysers |
| 3174 | Replacement of necessary tranducers for Turbidity analysers |
| 3175 | BSNL Charges for static IP Interconnection for Data receive station from all Local Contol RTU panels. |
| 3176 | Data transfer from RTU control panels |
| 3177 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete |
| 3178 | Central SCADA for ULB |
| 3179 | Application Engineer(Graduate Engineer) To monitor all issues related to both operation & service |
| 3180 | System Engineer(Diploma Engineer) To monitor all meters location through SCADA station and give feedback to the service engineers. |
| 3181 | Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks. |
| 3182 | Office assistant To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 3183 | BSNL Charges for static IP Interconnection for Data receive station from all Local Contol RTU panels. |
| 3184 | Data base management for WEB reporting Data storage and reporting system for view through WEB and Mobile networks |
| 3185 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting |
| 3186 | GOLLAPROLU NAGAR PANCHAYAT |
| 3187 | Providing 800mm dia DI K7 Clear Water gravity Main from Clear Water Sump to Yeleswaram town |
| 3188 | Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.for 800 mm dia DI K7 |
| 3189 | Manufacture supply delivery,of800 mm dia DI K7centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as directed by the departmental officer incharge of work |
| 3190 | Lowering the C.I. Pipes, D.I. Pipes of 800 mm dia DI K7centrifugally and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.etc complete as per ss and as directed by the departmental officer incharge of work |
| 3191 | Jointing the C.I,D.I. Pipes,of 800 mm dia DI K7 fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 etc complete as per ss and as directed by the departmental officer incharge of work |
| 3192 | Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation,etc. complete as per ss and as directed by the departmental officer incharge of work as follows |
| 3193 | 800mm dia 2.00m long DI DF pipes for scour |
| 3194 | 400mm dia 2.00m long DI DF pipes at intake well cum pump house |
| 3195 | 400mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2 |
| 3196 | Supply, deliveryof D.I. fittings of 250mm diaconfirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. etc.,complete as per S.S. and as directed by the departmental authorities. |
| 3197 | Lowering the C.I. Pipes, D.I. of 800 mm diaPipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.complete as per S.S. and as directed by the departmental authorities. |
| 3198 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 complete as per S.S. and as directed by the departmental authorities. as follows |
| 3199 | 800 mm dia |
| 3200 | 250 mm dia |
| 3201 | Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, and conveyance to work spot and stacking care fully at site etc.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3202 | 250mm Ø DI D/F valve - PN16 for scour |
| 3203 | 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves |
| 3204 | Supply, Delivery of D.I800mm dia double flanged Sluice Valves PN1.6conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steelandtransportation, etc complete ISI marked PN 1.6 (MPa) complete as per S.S. and as directed by the departmental authorities. as follows |
| 3205 | Supply, delivery and fixing in position of Single Chamber of150mm dia. PN1.6 DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including labour charges for placing and fixing in position etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 3206 | Manufacture, Supply and delivery of 150mm dia. PN1.6 Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation,etc., complete15 kg/sqcm test pressure complete as per S.S and as directed by the departmental officer incharge of work |
| 3207 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3208 | 250 mm dia |
| 3209 | 150 mm dia |
| 3210 | Labour charges for fixing of 150 mm dia Kinetic Air Valveswith isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 3211 | Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc.,complete as per S.S and as directed by the departmental officer incharge of work For Thrust Blocks |
| 3212 | Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20 For Anchor Blocks |
| 3213 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, on all materials etc., complete for finished item of work for thurst blocks |
| 3214 | Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3215 | Filling with sandin valve chambers sand bedding. This rate including cost of sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3216 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing ,centering,etc., ,complete as per S.S and as directed by the departmental officer incharge of work |
| 3217 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3218 | Raft0.10m thick |
| 3219 | For side walls0.20m thick 4x1.40=5.60 |
| 3220 | for cover slabs 0.15 m thick |
| 3221 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3222 | Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3223 | Filling with sandin valve chambers sand bedding. This rate including cost of sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3224 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing ,centering,etc., ,complete as per S.S and as directed by the departmental officer incharge of work |
| 3225 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3226 | Raft0.10m thick |
| 3227 | For side walls0.20m thick 2x1.55+2*1.75=6.6 |
| 3228 | for cover slabs 0.15 m thick |
| 3229 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3230 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. complete as per the directions of departmental authorities. |
| 3231 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3232 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities.as per the ditections of the departmental authorities. |
| 3233 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3234 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 3235 | Manufacture, Supply and delivery of 500mm dia MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. complete as per the directions of departmental authorities. |
| 3236 | Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method for inserting 1100mm dia MS Pipe in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe for National HighWay Crossing |
| 3237 | Manufacture, Supply and Delivery ofouter 1100mm dia 10 mm thick M.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, complete as per the directions of departmental authorities. |
| 3238 | Providing 600mm dia DI K7 Clear Water Gravity Main from Kirlampudi junctionto Tatiparthi |
| 3239 | Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For 600 mm dia DI K7 Pipe line trenches. |
| 3240 | Filling with Sand in Pipe line trenches. This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work For 600 mm dia DI K7 Pipe line trenches. |
| 3241 | Manufacture supply delivery,of centrifugally cast (spun) of 600 mm dia DI K7 ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per S.S and as directed by the departmental officer incharge of work |
| 3242 | Lowering the C.I. Pipes, D.I. Pipes of 600 mm dia DI K7 and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.complete as per S.S and as directed by the departmental officer incharge of work |
| 3243 | Jointing the C.I,D.I. Pipes,of 600 mm dia DI K7 fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 complete as per S.S and as directed by the departmental officer incharge of work |
| 3244 | Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation,etc. complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3245 | 300mm dia 2.00m long DI DF pipes for scour |
| 3246 | 600mm dia 2.00m long DI DF pipes at intake well cum pump house |
| 3247 | 600mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2 |
| 3248 | Supply, deliveryof 600mm diaD.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site.,complete as per S.S. and as directed by the departmental authorities. |
| 3249 | Lowering the C.I. Pipes, D.I. Pipes of 600mm dia of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.,complete as per S.S. and as directed by the departmental authorities. |
| 3250 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., BIS No.3114/85 complete as per S.S. and as directed by the departmental authorities. as follows |
| 3251 | 600 mm dia |
| 3252 | 250 mm dia |
| 3253 | 150 mm dia |
| 3254 | Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost of conveyance to work spot and stacking care fully at site etc.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3255 | 250mm Ø DI D/F valve - PN16 for scour |
| 3256 | 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves |
| 3257 | Supply, Delivery of 600mm Ø DI D/F valve - PN1.6D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel andtransportation, etc complete ISI marked PN 1.6 (MPa) |
| 3258 | Supply, delivery and fixing in position of Single Chamber 150mm dia. PN1.6 DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including and labour charges for placing and fixing in position etc.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3259 | Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) of150mm dia. PN1.6 as per AWWA, Ex-factory including trasportation, ., complete15 kg/sqcm test pressure complete as per S.S. and as directed by the departmental authorities. as follows |
| 3260 | Manufacture, Supply and delivery of600mm dia DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3261 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3262 | 600mm dia |
| 3263 | 250 mm dia |
| 3264 | 150 mm dia |
| 3265 | Labour charges for fixing of 150mm dia Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., .complete as per S.S. and as directed by the departmental authorities. as follows |
| 3266 | Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete as per S.S. and as directed by the departmental authorities..For Thrust Blocks |
| 3267 | Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.complete as per S.S. and as directed by the departmental authorities..For Thrust Blocks complete as per S.S. and as directed by the departmental authorities..For Anchor Blocks |
| 3268 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingall materials etc., complete for finished item of work complete as per S.S. and as directed by the departmental authorities..For Thrust Blocks |
| 3269 | Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3270 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3271 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3272 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3273 | Raft0.10m thick |
| 3274 | For side walls0.20m thick 4x1.7=6.80 |
| 3275 | for cover slabs 150 mm thick |
| 3276 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingcomplete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3277 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3278 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3279 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3280 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3281 | Raft0.10m thick |
| 3282 | For side walls0.20m thick 4x1.40=5.60 |
| 3283 | for cover slabs 0.15 m thick |
| 3284 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingall materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3285 | Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3286 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3287 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3288 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringas follows |
| 3289 | Raft0.10m thick |
| 3290 | For side walls0.20m thick 2x1.55+2*1.75=6.6 |
| 3291 | for cover slabs 0.15 m thick |
| 3292 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3293 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3294 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3295 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities.as per the ditections of the departmental authorities. |
| 3296 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3297 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 3298 | Manufacture, Supply and delivery of 500mm dia MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete |
| 3299 | Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method of 500mm dia MS pipe in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe for Nation High Way Crossing |
| 3300 | Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, for National high Way Crossing |
| 3301 | Providing 400mm dia DI K7 Clear Water Gravity Main from Tatiparthi to Gollaprolu |
| 3302 | Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches. |
| 3303 | Filling with Sand in Pipe line trenches. This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work For 600 mm dia DI K7 Pipe line trenches. |
| 3304 | Manufacture supply delivery,of centrifugally cast (spun) of 400 mm dia DI K7 ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking complete as per S.S and as directed by the departmental officer incharge of work |
| 3305 | Lowering the C.I. Pipes,400 mm dia DI K7 Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. complete as per S.S and as directed by the departmental officer incharge of work |
| 3306 | Jointing the C.I,D.I. Pipes of 400 mm dia DI K7 fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987Complete as per S.S and as directed by the departmental officer incharge of work |
| 3307 | Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, Complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3308 | 200mm dia 2.00m long DI DF pipes for scour |
| 3309 | 400mm dia 2.00m long DI DF pipes at intake well cum pump house |
| 3310 | 400mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2 |
| 3311 | Supply, deliveryof D.I. fittings 200mm dia confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate ,complete as per S.S. and as directed by the departmental authorities. |
| 3312 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, as per BIS No.3114/94. complete as per S.S. and as directed by the departmental authorities. as follows |
| 3313 | 200 mm dia |
| 3314 | 400 mm dia |
| 3315 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 complete as per S.S. and as directed by the departmental authorities. as follows |
| 3316 | 400 mm dia |
| 3317 | 200 mm dia |
| 3318 | 150 mm dia |
| 3319 | Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, and conveyance to work spot and stacking care fully at site etc.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3320 | 250mm Ø DI D/F valve - PN16 for scour |
| 3321 | 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves |
| 3322 | Supply, Delivery of 400mm Ø DI D/F valve - PN1.6D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steelandtransportation, etc complete ISI marked PN 1.6 (MPa) complete as per S.S. and as directed by the departmental authorities. as follows |
| 3323 | Supply, delivery and fixing in position of Single Chamber 150mm dia PN 1.6 DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including labour charges for placing and fixing in position etc. complete as per S.S. and as directed by the departmental authorities. as follows |
| 3324 | Manufacture, Supply and delivery of 150mm dia PN1.6 Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, etc., complete15 kg/sqcm test pressure complete as per S.S. and as directed by the departmental authorities. as follows |
| 3325 | Manufacture, Supply and delivery of400mm dia DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. complete as per S.S. and as directed by the departmental authorities. as follows |
| 3326 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.complete as per S.S. and as directed by the departmental authorities. as follows |
| 3327 | 400mm dia |
| 3328 | 200 mm dia |
| 3329 | 150 mm dia |
| 3330 | Labour charges for fixing 150mm dia Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as per S.S. and as directed by the departmental authorities. |
| 3331 | Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc.,complete as per S.S. and as directed by the departmental authorities. |
| 3332 | Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20complete as per S.S. and as directed by the departmental authorities. |
| 3333 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingall materials etc., complete for finished item of work for Thrust Blocks |
| 3334 | Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3335 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3336 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 3337 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering as follows |
| 3338 | Raft0.10m thick |
| 3339 | For side walls0.20m thick 4x1.7=6.80 |
| 3340 | for cover slabs 150 mm thick |
| 3341 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3342 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3343 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3344 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3345 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringas follows |
| 3346 | Raft0.10m thick |
| 3347 | For side walls0.20m thick 4x1.40=5.60 |
| 3348 | for cover slabs 0.15 m thick |
| 3349 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3350 | Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3351 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3352 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3353 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringas follows |
| 3354 | Raft0.10m thick |
| 3355 | For side walls0.20m thick 2x1.55+2*1.75=6.6 |
| 3356 | for cover slabs 0.15 m thick |
| 3357 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3358 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. complete as per the directions of departmental authorities. |
| 3359 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3360 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3361 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3362 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 3363 | Manufacture, Supply and delivery of 500mm dia MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. ., complete for finished item of work with nomonal reinforcement for Road restoration.complete as per the directions of departmental authorities. |
| 3364 | Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method of inserting 500mm dia MS pipe in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials complete as per the directions of departmental authorities. National high Way Crossing |
| 3365 | Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, for National high Way Crossing |
| 3366 | Providing DI K7 Gravity Mains in Gollaprolu Town |
| 3367 | Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00, 5.00, 5.50, 6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per ss and as direceted by the departmental officer incharge of work as follows |
| 3368 | 300mm dia |
| 3369 | 250mm dia |
| 3370 | 200mm dia |
| 3371 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 complete as per ss and as direceted by the departmental officer incharge of work as follows |
| 3372 | 300mm dia |
| 3373 | 250mm dia |
| 3374 | 200mm dia |
| 3375 | Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 complete as per ss and as direceted by the departmental officer incharge of work as follows |
| 3376 | 100mm dia on 300mm |
| 3377 | 80mm dia on 250mm |
| 3378 | 80mm dia on 200mm |
| 3379 | Manufacture, supply and delivery of Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. The rate including cost of pipes, transportation of site, etc., complete as per ss and as direceted by the departmental officer incharge of work as follows |
| 3380 | 300mm x 2.00m for SV |
| 3381 | 250mm x 2.00m for SV |
| 3382 | 200mm x 2.00m for SV |
| 3383 | Manufacture, supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) including complete as per ss and as direceted by the departmental officer incharge of work |
| 3384 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work as follows |
| 3385 | Mechanical 70% |
| 3386 | Manual |
| 3387 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3388 | Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.complete as per the directions of departmental authorities.as follows |
| 3389 | 300mm dia |
| 3390 | 250mm dia |
| 3391 | 200mm dia |
| 3392 | Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987.complete as per the directions of departmental authorities.as follows |
| 3393 | 300mm dia |
| 3394 | 250mm dia |
| 3395 | 200mm dia |
| 3396 | Labour charges for lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves.this rate including all materials and other incidental charges complete as per the directions of departmental authorities.as follows |
| 3397 | 300mm dia |
| 3398 | 250mm dia |
| 3399 | 200mm dia |
| 3400 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as per the directions of departmental authorities.as follows |
| 3401 | 100mm dia on 300mm |
| 3402 | 80mm dia on 250mm |
| 3403 | 80mm dia on 200mm |
| 3404 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. complete as per the directions of departmental authorities.as follows |
| 3405 | 350mm dia |
| 3406 | 300mm dia |
| 3407 | 250mm dia |
| 3408 | 200mm dia |
| 3409 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., BIS No.3114/85.complete as per the directions of departmental authorities.as follows |
| 3410 | 350mm dia |
| 3411 | 300mm dia |
| 3412 | 250mm dia |
| 3413 | 200mm dia |
| 3414 | Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling for insertion of 800mm dia MS pipethrough specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –Charge. |
| 3415 | Manufacture, supply and delivery of 800mm dia M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or guniting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere inAP.complete as per the directions of departmental authorities. |
| 3416 | Construction of Valve Pits, Anchor Blocks, Thrust BlocksEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work |
| 3417 | Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work |
| 3418 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work |
| 3419 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work |
| 3420 | Bed |
| 3421 | Walls |
| 3422 | Slab |
| 3423 | C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work |
| 3424 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work for thrust blocks |
| 3425 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3426 | Construction of 700 KL ELSR with a staging of 18m at EBC Colony Zone-1 |
| 3427 | Construction of ELSRS With the following specification700kl capacitywith a staging of 18 m, without Seismic analysis. |
| 3428 | All concrete components shall be designed with M30 Design Mix proportion. The rate are arrived with base rate of cement Rs 4220/- per MT and steel Rs 59000. 1.The foundations shall be designed for solid raft; 2.Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.3.The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings.4.The above rates adopted for a wind pressure upto \"250 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5%5.The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones6.The basic rates shall be increased by 15% for Zone-III of seismic zones7.The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KL8.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 3429 | i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:Above 1000KL threerows columns shall be provided a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm diaAll Manholes Frames & covers |
| 3430 | b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Covers All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos. RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.RCC precast ladders of 0.60 m width - 2 Nos. RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 3431 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 3432 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 3433 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adoptedStaff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 3434 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 3435 | Construction of 500 KL ELSR with a staging of 18m at WTP Zone-2 |
| 3436 | Construction of ELSRS With the following specification500 kl capacitywith a staging of 18 m, without Seismic analysis. |
| 3437 | All concrete components shall be designed with M30 Design Mix proportion. The rate are arrived with base rate of cement Rs 4220/- per MT and steel Rs 59000. 1.The foundations shall be designed for solid raft; 2.Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.3.The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings.4.The above rates adopted for a wind pressure upto \"250 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5%5.The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones6.The basic rates shall be increased by 15% for Zone-III of seismic zones7.The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KL8.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 3438 | i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:Above 1000KL threerows columns shall be provided a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm diaAll Manholes Frames & covers |
| 3439 | b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Covers All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos. RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.RCC precast ladders of 0.60 m width - 2 Nos. RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 3440 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 3441 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 3442 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adoptedStaff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 3443 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 3444 | Construction of 800 KL ELSR with a staging of 18m at SC Colony Zone-3 |
| 3445 | Construction of ELSRS With the following specification800kl capacitywith a staging of 18 m, without Seismic analysis. |
| 3446 | All concrete components shall be designed with M30 Design Mix proportion. The rate are arrived with base rate of cement Rs 4220/- per MT and steel Rs 59000. 1.The foundations shall be designed for solid raft; 2.Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.3.The above rates are adopted for preparation of estimate for construction of ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes,specials and valves as per departmental designs and drawings.4.The above rates adopted for a wind pressure upto \"250 kg/sq m\". For every 100 kg/sqm decrease in wind pressure, the rate shall be decreased by 5%5.The Basic rate is adopted by considering the design for Seismic forces for Zone-I & II only of seismic zones6.The basic rates shall be increased by 15% for Zone-III of seismic zones7.The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & upto 1000KL8.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 3447 | i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:Above 1000KL threerows columns shall be provided a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm diaAll Manholes Frames & covers |
| 3448 | b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Covers All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos. RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.RCC precast ladders of 0.60 m width - 2 Nos. RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 3449 | The staircase shall be enclosed with brick masonary walls on three side and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.Lightening Arrestor with all its accessories complete including earthing,with relevant IS Codes - 1 No. |
| 3450 | Compound wall: Construction of compound wall including ornamentalM.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Gound level over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standardsgrade shall be constructed for gate pillars. All the materials shall befollowed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size,fixed with MS angulars of 25mm X 25mm X 4mm in \"Y\" shape to hieght of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brickwork. |
| 3451 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i) 500 KL : 0.086%ii) 1000 KL : 0.047%iii) 1500 KL : 0.034%iv) 2000 KL : 0.026%v) 2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adoptedStaff Quarter shall be constructed for a minimum plinth area of 40 sqm with the following specification: RCC framed structure withconcrete grade not less than M20 design mix at the locations specified by the department atthe time of execution with verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases |
| 3452 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides openable shutter window 1.35 X 1.35mts outer frame section 48x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided.Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer.Water Storage tank made with plastic/polymer material of reputed makewith necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 3453 | Providing 500 kVA Transformer at Intakewell cum pumphouse including transformer yard & Providing 500KVA Generator at WTP including shed |
| 3454 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply |
| 3455 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113 |
| 3456 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111 |
| 3457 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110 |
| 3458 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps Quotation Rate |
| 3459 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105 |
| 3460 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures Quotation Rate |
| 3461 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097 |
| 3462 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below: |
| 3463 | A) Earth Electrodes |
| 3464 | B) 25 x 3 mm HDB copper flat |
| 3465 | C) Epoxy insulators |
| 3466 | D) No.\"8\" SWG Copper wire. |
| 3467 | Supply and erection of 500 kva KVA, 11KV/433 V, DY-11 Vectro group, out door type, plinth mounting type, Hint /make transformer with bushings on HT side and cable entry box on L V side to received 1.1 KV grade cable with all standard accessories transformer oil. tansformer having copper wound natural cooled with all standard accessories - ELEC-6.3.5 |
| 3468 | Supply and laying of 3.5 core x 400 sq.mm, 1.10 KV grade PVC insulated and armoured cable with alminium conductors Rs 1905+13.615% ELEC-4.1.46 |
| 3469 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976 |
| 3470 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978 |
| 3471 | Incominga) . 630A TPN SFU for main switch |
| 3472 | b) . 630 A pole change over switch |
| 3473 | c) one setMetering Panel Comprisinga). 1( 0-500V) 96mm.SQ.flush type Digital Voltmeter. |
| 3474 | d) 3 way any off Voltmeter Selector Switch |
| 3475 | e). ( 0-250A) 96mm SQ.flush type digital Ammeter |
| 3476 | f). 3 way any off Ammeter Selector |
| 3477 | g).3RYB Phase indication lamps with leds |
| 3478 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 |
| 3479 | Outgoing630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3480 | 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3481 | 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3482 | 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3483 | 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3484 | 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 3485 | .KWH digital meter fro lighting section |
| 3486 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879 |
| 3487 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938 |
| 3488 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 |
| 3489 | 500KV.LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. |
| 3490 | Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03460 |
| 3491 | Transformer yard Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means for column footings |
| 3492 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss and as directed by the departmental officer incharge of work for column footings |
| 3493 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as directed by the departmental officer incharge of work for column footings |
| 3494 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concretecomplete as per ss and as directed by the departmental officer incharge of work as follows |
| 3495 | column footings |
| 3496 | column |
| 3497 | Plinth Beam |
| 3498 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)BLD-CSTN-10-3 the rate including all materials and other incidentaal charges complete as per ss and as directed by the departmental officer incharge of work |
| 3499 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126)complete as per ss and as directed by the departmental officer incharge of work for footings,columns,Plinth Beams |
| 3500 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately) |
| 3501 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete as per ss and as directed by the departmental officer incharge of work |
| 3502 | Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss and as directed by the departmental officer incharge of work for 3 mts wide gate |
| 3503 | Filling the transformer yard with 40mm HBG metal m/c The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work |
| 3504 | Providing 250KVA Generator at Intakewell including shed |
| 3505 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply |
| 3506 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113 |
| 3507 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111 |
| 3508 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110 |
| 3509 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps |
| 3510 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105 |
| 3511 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures |
| 3512 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097 |
| 3513 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below: |
| 3514 | A) Earth Electrodes |
| 3515 | B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 |
| 3516 | C) Epoxy insulators |
| 3517 | D) No.\"8\" SWG Copper wire. MAT 04141 |
| 3518 | Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04044c 250KVA |
| 3519 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431 |
| 3520 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976 |
| 3521 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978 |
| 3522 | Incominga) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3523 | b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 3524 | c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980 |
| 3525 | d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989 |
| 3526 | e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983 |
| 3527 | f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990 |
| 3528 | g).3RYB Phase indication lamps with leds |
| 3529 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 |
| 3530 | Outgoing630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3531 | 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3532 | 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3533 | 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3534 | 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 3535 | 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 3536 | .KWH digital meter fro lighting section |
| 3537 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879 |
| 3538 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938 |
| 3539 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 |
| 3540 | 1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. |
| 3541 | Supply and Laying of 3C X50Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b |
| 3542 | Transformer ShedEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work for Footings |
| 3543 | Filling Sandin foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work complete as per ss and as directed by the departmental officer incharge of work for footings |
| 3544 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the workcomplete as per ss and as directed by the departmental officer incharge of work for footings |
| 3545 | RCC M- 25 Design mix (Cement 380 kgs fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering. as per SS and as directed by the Departmental officer in charge of the work |
| 3546 | Footings |
| 3547 | Plinth Beam |
| 3548 | Columns |
| 3549 | Roof Beams |
| 3550 | Roof slab 125mm thick |
| 3551 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126)complete as per ss and as directed by the departmental officer incharge of work for footings,columns,Plinth Beams |
| 3552 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including all materials,labour charges aand other incidental charges,conveyance of all materials at site, labour charges for curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3553 | Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S and as direceted by the departmental officer incharge of work for ceiling |
| 3554 | Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S and as direceted by the departmental officer incharge of work for walls |
| 3555 | Plastering with CM (1:3) 20mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S and as direceted by the departmental officer incharge of work for flooring |
| 3556 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete as per ss and as directed by the departmental officer incharge of work |
| 3557 | Providing Painting with Synthetic Enamel paints - Two Coats - Fornew Iron Work over a primary coat of Red oxide over all three coats. The rate cinluding cost and conveyance of all material, labour charges, etc., complete as per SS and as directed by the departmental officer in charge of the work. |
| 3558 | Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 and as directed by the departmental officer in charge of the work |
| 3559 | Construction 16 m dia clear water sump at proposed WTP Head Works(681 KL) |
| 3560 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- |
| 3561 | upto 3m depth |
| 3562 | 3-6.00m depth |
| 3563 | Filling in for 681KL Clear Water Sump Bedding as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1) complete as per ss and as direceted by the departmentaal officer incharge of work |
| 3564 | Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations complete as per ss and as direceted by the departmentaal officer incharge of work |
| 3565 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer complete as per ss and as direceted by the departmentaal officer incharge of work |
| 3566 | Raft slab |
| 3567 | For side walls circular 0.30m thick initial height 3.00 mbelow GL |
| 3568 | For side walls circular 0.30m thick above GL |
| 3569 | Columns0.30 x 0.30 , |
| 3570 | Roof beams |
| 3571 | Roof slab0.15m thick 0.786*(13.10^2-6.00^2) |
| 3572 | Roof dome slab 0.15m thick |
| 3573 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 3574 | Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side) complete as per ss and as direceted by the departmentaal officer incharge of work |
| 3575 | Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authoritiescomplete as per ss and as direceted by the departmentaal officer incharge of work |
| 3576 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, rate includingall materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 3577 | Providing Site filling to Head Water Works |
| 3578 | Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost,and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.and as direceted by the departmental officer incharge of work |
| 3579 | Construction of Staff Quarters at Intake well, Head Works site at Yeleswaram |
| 3580 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places |
| 3581 | Providing river sand filling including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per S.S.and as direceted by the departmental officer incharge of work |
| 3582 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc.,complete as per S.S.and as direceted by the departmental officer incharge of work |
| 3583 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix ,complete as per S.S.and as direceted by the departmental officer incharge of work |
| 3584 | column footings |
| 3585 | Columns |
| 3586 | Plinth Beam |
| 3587 | Lintle beamsWindows |
| 3588 | Roof Beams |
| 3589 | Roof slab0.125m thick with 0.30m extension all sides |
| 3590 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows |
| 3591 | Loft slab 0.075m thick kitchen |
| 3592 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc ,complete as per S.S.and as direceted by the departmental officer incharge of work as follows |
| 3593 | Ground floor |
| 3594 | 1st floor |
| 3595 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per S.S.and as direceted by the departmental officer incharge of work as follows out side & inside as follows |
| 3596 | Ground floor |
| 3597 | 1st floor |
| 3598 | Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height |
| 3599 | For ceiling slab area |
| 3600 | Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side) |
| 3601 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss and as direceted by the departmentaal officer incharge of work |
| 3602 | Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workcomplete as ss and as direceted by the departmentaal officer incharge of work |
| 3603 | Door -D - 1.20X2.10 m |
| 3604 | DoorsD1 -1.00X2.10m |
| 3605 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workfor windows 1.20x1.20 |
| 3606 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workfor Toilet door D2 |
| 3607 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work for Toilet Door D2 |
| 3608 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work in all floors. |
| 3609 | Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring complete as per ss and as direceted by the departmental officer incharge of work |
| 3610 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingall materials etc., complete for finished item of work in all floors. |
| 3611 | Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss as direceted by the departmental officer incharge of work |
| 3612 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clampscomplete as per ss as direceted by the departmental officer incharge of work |
| 3613 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3614 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chagescomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3615 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential buildingcomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3616 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3617 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour chargescomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3618 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3619 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3620 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etccomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3621 | S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3622 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pridecomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3623 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omegacomplete as per IE Rules as direceted by the departmental officer incharge of work |
| 3624 | Supply of 20W tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj. complete as per IE Rules as direceted by the departmental officer incharge of work |
| 3625 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks complete as per ss and as directed by the departmental officer incharge of work |
| 3626 | Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm size complete as per ss and as directed by the departmental officer incharge of work |
| 3627 | Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components complete as per ss and as directed by the departmental officer incharge of work |
| 3628 | Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock complete as per ss and as directed by the departmental officer incharge of work |
| 3629 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.complete as per ss and as directed by the departmental officer incharge of work |
| 3630 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)complete as per ss and as directed by the departmental officer incharge of work |
| 3631 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand complete as per ss and as directed by the departmental officer incharge of work |
| 3632 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice complete as per ss and as directed by the departmental officer incharge of work |
| 3633 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg complete as per ss and as directed by the departmental officer incharge of work |
| 3634 | Supply & Fixing ofGI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete as per ss and as directed by the departmental officer incharge of work as follows |
| 3635 | 25 mm dia nominal bore -from tank to jn forof individual lines |
| 3636 | 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 3637 | 15 mm dia nominal bore -for internal |
| 3638 | Supply & Fixing ofof GI & GM fittings including the cost of pipe & its fittings & labour charges complete as per ss and as directed by the departmental officer incharge of work as follows |
| 3639 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 3640 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 3641 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 3642 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 3643 | Supply & Fixing of GI unionrate including all materials and other incidental charges complete as per ss and as directed by the departmental officer incharge of work as follows |
| 3644 | 12.70mm |
| 3645 | 19.05mm |
| 3646 | 25.40mm |
| 3647 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations For Septic tank |
| 3648 | Filling with sandin Septic Sand Bedding as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH rate including with ramming, and cost of Sand and other incidental charges |
| 3649 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as direceted by the departmental officer incharge of work |
| 3650 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss and as direceted by the departmental officer incharge of work |
| 3651 | Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per ss and as direceted by the departmental officer incharge of work out side & inside |
| 3652 | RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering complete as per ss and as direceted by the departmental officer incharge of work for Septic Tank slab |
| 3653 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors. for septic tank |
| 3654 | Construction of Staff QuProviding Instrumentation and Automation of the Pumping System, Supervisory Control and Data Acuasation System (SCADA) & Providing 2x7 water supply system at 250 KL ELSR at Water works and 500 KL ELSR at Sai Baba mettaarters at Intake well, Head Works site at Yeleswaram |
| 3655 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 3656 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3657 | For Raw Water Pumping Station as per the above specification |
| 3658 | Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer |
| 3659 | DN 100 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification |
| 3660 | Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 3661 | 700MM Dia Above Specification. |
| 3662 | Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 3663 | outlet of Raw Water Pumping Station at Yeleswaram reservoir |
| 3664 | Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 3665 | outlet of Raw Water Pumping Station at Yeleswaram reservoir |
| 3666 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 3667 | outlet of Raw Water Pumping Station at Yeleswaram reservoir |
| 3668 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 3669 | outlet of Water Treatment plant |
| 3670 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3671 | Raw Water Outlet of Water Treatment plant |
| 3672 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 3673 | Raw Water outlet and 32 MLD outlet at WTP |
| 3674 | Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 3675 | For Raw Water Pumping Station as per the above specification |
| 3676 | Reservoir Inlet Management :: |
| 3677 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. |
| 3678 | 100MM Dia Above Specification. |
| 3679 | 150 MM Dia Above Specification. |
| 3680 | 200 MM Dia Above Specification. |
| 3681 | Inlet of 2100 KL Existing SUMP at Samalkota |
| 3682 | Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc , complete, and as directed by the dept., officer. |
| 3683 | 100MM Dia Above Specification. |
| 3684 | 150 MM Dia Above Specification. |
| 3685 | 200 MM Dia Above Specification. |
| 3686 | 300 MM Dia Above Specification. |
| 3687 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excludingand as per SS and as directed by the department officer |
| 3688 | 100MM Dia Above Specification. |
| 3689 | 150 MM Dia Above Specification. |
| 3690 | 200 MM Dia Above Specification. |
| 3691 | 300 MM Dia Above Specification. |
| 3692 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3693 | 100MM Dia Above Specification. |
| 3694 | 150 MM Dia Above Specification. |
| 3695 | 200 MM Dia Above Specification. |
| 3696 | 300 MM Dia Above Specification. |
| 3697 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, chargesincluding cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3698 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and laborand as per SS and as directed by the department officer |
| 3699 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, |
| 3700 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittingsincluding cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3701 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 3702 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3703 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3704 | Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3705 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3706 | 24 x 7 Water Supply ::DMA Management :: |
| 3707 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. |
| 3708 | Inlet of DMA-1 under 250 KL ELSR at Water works |
| 3709 | Inlet of DMA-1 under 500 KL ELSR at Sai Baba metta |
| 3710 | Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 3711 | 150MM Dia Above Specification. |
| 3712 | 350MM Dia Above Specification. |
| 3713 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 3714 | 150MM Dia Above Specification. |
| 3715 | 350MM Dia Above Specification. |
| 3716 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3717 | 150MM Dia Above Specification. |
| 3718 | 350MM Dia Above Specification. |
| 3719 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 3720 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 3721 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3722 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3723 | Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3724 | Providing, Installing and satisfactory field testing of Self Powered Pressure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 3725 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 3726 | AMI Water Meter Management. |
| 3727 | Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A. |
| 3728 | Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-B |
| 3729 | Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer. |
| 3730 | Local SCADA Control Sation: |
| 3731 | Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer. |
| 3732 | Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer. |
| 3733 | Laying new Distribution lineszone-I |
| 3734 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 3735 | Machenical mans 70% |
| 3736 | Manual means 30% |
| 3737 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking etc. complete as per S.S and as directed by the departmental officer incharge of work. |
| 3738 | 110mm dia. |
| 3739 | 160mm dia. |
| 3740 | 200mm dia. |
| 3741 | 250mm dia. |
| 3742 | 315 mm dia |
| 3743 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking complete as per S.S and as directed by the departmental officer incharge of work. |
| 3744 | a) Pipe ends - long neck |
| 3745 | 110mm dia. |
| 3746 | 110 mm dia for Air TEEs |
| 3747 | 160mm dia. |
| 3748 | 160 mm dia for Air TEEs |
| 3749 | 200mm dia. |
| 3750 | 200 mm dia for Air TEEs |
| 3751 | 250mm dia. |
| 3752 | 250 mm dia for Air TEEs |
| 3753 | b) MS Flanges |
| 3754 | 110mm dia. |
| 3755 | 110 mm dia for Air TEEs |
| 3756 | 160mm dia. |
| 3757 | 160 mm dia for Air TEEs |
| 3758 | 200mm dia. |
| 3759 | 200 mm dia for Air TEEs |
| 3760 | 250mm dia. |
| 3761 | 250 mm dia for Air TEEs |
| 3762 | c) End Caps |
| 3763 | 110mm dia. |
| 3764 | 160mm dia. |
| 3765 | 200mm dia. |
| 3766 | 250mm dia. |
| 3767 | d) Reducers |
| 3768 | 110X125 mmdia |
| 3769 | 125x140 mm dia |
| 3770 | 140x160 mm dia |
| 3771 | 160x180 mm dia |
| 3772 | 180x200 mm dia |
| 3773 | e) TEES |
| 3774 | 110mm dia. |
| 3775 | 160mm dia. |
| 3776 | 200mm dia. |
| 3777 | 250mm dia. |
| 3778 | F)Bends |
| 3779 | 110mm dia. |
| 3780 | 160mm dia. |
| 3781 | 200mm dia. |
| 3782 | 250mm dia. |
| 3783 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work. |
| 3784 | 110mm dia. |
| 3785 | 160mm dia. |
| 3786 | 200mm dia. |
| 3787 | 250mm dia. |
| 3788 | 315 mm dia |
| 3789 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 3790 | DIDF pipes for scours |
| 3791 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 3792 | 100x1.00m long DF pipes for sluice valves |
| 3793 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 3794 | 150x1.00m long DF pipes for sluice valves |
| 3795 | 200 mm dia x2.00m on 315 and 355 mm dia pipes for scours |
| 3796 | 200x1.00m long DF pipes for sluice valves |
| 3797 | 100 mm dia deck foot bends |
| 3798 | 100x100x80 mm DIDF TEE for air valves |
| 3799 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. PN16 - |
| 3800 | 100 mm distrubution |
| 3801 | 150mm dia for distrubution |
| 3802 | 200mm dia for distrubution |
| 3803 | 250mm dia for distrubution |
| 3804 | for scour |
| 3805 | 100mm diaon 110 mm and 160 mm dia mains |
| 3806 | 150 mm dia on 200 and 250 mm dia lines |
| 3807 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 3808 | 80 mm dia on 110 mm pipe |
| 3809 | 80 mm dia on 160 mm pipe |
| 3810 | 80mm dia 200 mm pipe |
| 3811 | 80mm dia 250 mm pipe |
| 3812 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. Rate including all the materials,labour charges and other incidental charges and complete as per ss and as directed by the departmental officer incharge of work |
| 3813 | 100 mm distrubution |
| 3814 | 150mm dia for distrubution |
| 3815 | 200mm dia for distrubution |
| 3816 | 250mm dia for distrubution |
| 3817 | for scour |
| 3818 | 100mm diaon 110 mm and 160 mm dia mains |
| 3819 | 150 mm dia on 200 and 250 mm dia lines |
| 3820 | Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3821 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3822 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., completeas per ss and as direceted by the departmental officer incharge of work |
| 3823 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor completeas per ss and as direceted by the departmental officer incharge of work as follows |
| 3824 | Raft0.10m thick |
| 3825 | For side walls0.20m thick 4x1.40=5.6 |
| 3826 | for cover slabs 0.15m thick |
| 3827 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3828 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3829 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3830 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3831 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringcomplete as per S.S and as directed by the departmental officer incharge of workfollows |
| 3832 | Raft0.10m thick |
| 3833 | For side walls0.20m thick 4x1.40=5.6 |
| 3834 | for cover slabs 0.15m thick |
| 3835 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3836 | construction of valve chambersEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3837 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3838 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3839 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering complete as per S.S and as directed by the departmental officer incharge of work as follows |
| 3840 | Raft0.10m thick |
| 3841 | For side walls0.20m thick 4x1.40=5.60 |
| 3842 | for cover slabs 0.15 m thick |
| 3843 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingon all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3844 | construction of valve chambersEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3845 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3846 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., ,complete as per S.S and as directed by the departmental officer incharge of work |
| 3847 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3848 | Raft0.10m thick |
| 3849 | For side walls0.20m thick 4x1.40=5.60 |
| 3850 | for cover slabs 0.15 m thick |
| 3851 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3852 | construction of valve chambersEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3853 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3854 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3855 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs complete as per ss and as direceted by the departmental officer incharge of work |
| 3856 | Raft0.10m thick |
| 3857 | For side walls0.20m thick 4x1.40=5.6 |
| 3858 | for cover slabs 0.15m thick |
| 3859 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying , complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3860 | construction of valve chambersEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3861 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3862 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3863 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3864 | Raft0.10m thick |
| 3865 | For side walls0.20m thick 4x1.40=5.6 |
| 3866 | for cover slabs 0.15m thick |
| 3867 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3868 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3869 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3870 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3871 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3872 | Raft0.10m thick |
| 3873 | For side walls0.20m thick 4x1.40=5.6 |
| 3874 | for cover slabs 0.15m thick |
| 3875 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3876 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3877 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3878 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 3879 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3880 | Raft0.10m thick |
| 3881 | For side walls0.20m thick 4x1.40=5.6 |
| 3882 | for cover slabs 0.15m thick |
| 3883 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3884 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3885 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3886 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 3887 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3888 | Raft0.10m thick |
| 3889 | For side walls0.20m thick 4x1.40=5.60 |
| 3890 | for cover slabs 0.15 m thick |
| 3891 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 3892 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, from source of supply as per BIS No.3114/94.complete as per ss and as direceted by the departmental officer incharge of work |
| 3893 | 100 mm |
| 3894 | 150 mm dia |
| 3895 | 200 mm dia |
| 3896 | 250 mm dia |
| 3897 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc.,BIS No.3114/85 complete as per ss and as direceted by the departmental officer incharge of work. |
| 3898 | 100 mm dia |
| 3899 | 150 mm dia |
| 3900 | 200 mm dia |
| 3901 | 250 mm dia |
| 3902 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. complete as per the directions of departmental authorities. |
| 3903 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3904 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 3905 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3906 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 3907 | Laying new Distribution lineszone-II |
| 3908 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 3909 | Machenical mans 70% |
| 3910 | Manual means 20% |
| 3911 | Filling with Sand in pipe line bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3912 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stackingetc. complete as per S.S and as direceted by the departmental officer incharge of work |
| 3913 | 110mm dia. |
| 3914 | 160mm dia. |
| 3915 | 200mm dia. |
| 3916 | 250mm dia. |
| 3917 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking etc.complete as per ss and as direceted by the departmental officer incharge of work |
| 3918 | a) Pipe ends - long neck |
| 3919 | 110mm dia. |
| 3920 | 110 mm dia for Air TEEs |
| 3921 | 160mm dia. |
| 3922 | 160 mm dia for Air TEEs |
| 3923 | 200mm dia. |
| 3924 | 200 mm dia for Air TEEs |
| 3925 | 250mm dia. |
| 3926 | 250 mm dia for Air TEEs |
| 3927 | b) MS Flanges |
| 3928 | 110mm dia. |
| 3929 | 110 mm dia for Air TEEs |
| 3930 | 160mm dia. |
| 3931 | 160 mm dia for Air TEEs |
| 3932 | 200mm dia. |
| 3933 | 200 mm dia for Air TEEs |
| 3934 | 250mm dia. |
| 3935 | 250 mm dia for Air TEEs |
| 3936 | c) End Caps |
| 3937 | 110mm dia. |
| 3938 | 160mm dia. |
| 3939 | 200mm dia. |
| 3940 | 250mm dia. |
| 3941 | d) Reducers |
| 3942 | 110X125 mmdia |
| 3943 | 125x140 mm dia |
| 3944 | 140x160 mm dia |
| 3945 | 160x180 mm dia |
| 3946 | 180x200 mm dia |
| 3947 | e) TEES |
| 3948 | 110mm dia. |
| 3949 | 160mm dia. |
| 3950 | 200mm dia. |
| 3951 | 250mm dia. |
| 3952 | F)Bends |
| 3953 | 110mm dia. |
| 3954 | 160mm dia. |
| 3955 | 200mm dia. |
| 3956 | 250mm dia. |
| 3957 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental authorities. |
| 3958 | 110mm dia. |
| 3959 | 160mm dia. |
| 3960 | 200mm dia. |
| 3961 | 250mm dia. |
| 3962 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 3963 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 3964 | 100x1.00m long DF pipes for sluice valves |
| 3965 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 3966 | 150x1.00m long DF pipes for sluice valves |
| 3967 | 200 mm dia x2.00m on 315 and 355 mm dia pipes for scours |
| 3968 | 200x1.00m long DF pipes for sluice valves |
| 3969 | 250x1.00m long DF pipes for sluice valves |
| 3970 | 100 mm dia deck foot bends |
| 3971 | 100x100x80 mm DIDF TEE for air valves |
| 3972 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and including transportation. PN16 - |
| 3973 | 100 mm distrubution |
| 3974 | 150mm dia for distrubution |
| 3975 | 200mm dia for distrubution |
| 3976 | 250mm dia for distrubution |
| 3977 | for scour |
| 3978 | 100mm diaon 110 mm and 160 mm dia mains |
| 3979 | 150 mm dia on 200 and 250 mm dia lines |
| 3980 | 200 mm dia on 315 and 355 mm lines |
| 3981 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 3982 | 80 mm dia on 110 mm pipe |
| 3983 | 80 mm dia on 160 mm pipe |
| 3984 | 80mm dia 200 mm pipe |
| 3985 | 80mm dia 250 mm pipe |
| 3986 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.rate including all materials and other incidental charges complete as per S.S and as directed by the departmental authorities. |
| 3987 | 100 mm distrubution |
| 3988 | 150mm dia for distrubution |
| 3989 | 200mm dia for distrubution |
| 3990 | 250mm dia for distrubution |
| 3991 | for scour |
| 3992 | 100mm diaon 110 mm and 160 mm dia mains |
| 3993 | 150 mm dia on 200 and 250 mm dia lines |
| 3994 | 200 mm dia on 315 and 355 mm lines |
| 3995 | Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 3996 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 3997 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 3998 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 3999 | Raft0.10m thick |
| 4000 | For side walls0.20m thick 4x1.40=5.6 |
| 4001 | for cover slabs 0.15m thick |
| 4002 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingon all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4003 | Earthwork in excavation for Valve Chambers as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4004 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4005 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4006 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4007 | Raft0.10m thick |
| 4008 | For side walls0.20m thick 4x1.40=5.6 |
| 4009 | for cover slabs 0.15m thick |
| 4010 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4011 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4012 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4013 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4014 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4015 | Raft0.10m thick |
| 4016 | For side walls0.20m thick 4x1.40=5.60 |
| 4017 | for cover slabs 0.15 m thick |
| 4018 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4019 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4020 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4021 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4022 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4023 | Raft0.10m thick |
| 4024 | For side walls0.20m thick 4x1.40=5.60 |
| 4025 | for cover slabs 0.15 m thick |
| 4026 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4027 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4028 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4029 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4030 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4031 | Raft0.10m thick |
| 4032 | For side walls0.20m thick 4x1.40=5.6 |
| 4033 | for cover slabs 0.15m thick |
| 4034 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4035 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4036 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4037 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4038 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4039 | Raft0.10m thick |
| 4040 | For side walls0.20m thick 4x1.40=5.6 |
| 4041 | for cover slabs 0.15m thick |
| 4042 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingall materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4043 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4044 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4045 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4046 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4047 | Raft0.10m thick |
| 4048 | For side walls0.20m thick 4x1.40=5.60 |
| 4049 | for cover slabs 0.15 m thick |
| 4050 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4051 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4052 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4053 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4054 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4055 | Raft0.10m thick |
| 4056 | For side walls0.20m thick 4x1.40=5.6 |
| 4057 | for cover slabs 0.15m thick |
| 4058 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4059 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4060 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4061 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4062 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4063 | Raft0.10m thick |
| 4064 | For side walls0.20m thick 4x1.40=5.6 |
| 4065 | for cover slabs 0.15m thick |
| 4066 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, , complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4067 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4068 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4069 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4070 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4071 | Raft0.10m thick |
| 4072 | For side walls0.20m thick 4x1.40=5.60 |
| 4073 | for cover slabs 0.15 m thick |
| 4074 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, , complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4075 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,as per BIS No.3114/94.complete as per ss and as direceted by the departmental officer incharge of work |
| 4076 | 100 mm |
| 4077 | 150 mm dia |
| 4078 | 200 mm dia |
| 4079 | 250 mm dia |
| 4080 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per ss and as direceted by the departmental officer incharge of work BIS No.3114/85. |
| 4081 | 100 mm dia |
| 4082 | 150 mm dia |
| 4083 | 200 mm dia |
| 4084 | 250 mm dia |
| 4085 | Cutting of existing B.T.road surface for pipe line trench (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. complete as per the directions of departmental authorities. |
| 4086 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 4087 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 4088 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4089 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 4090 | Laying new Distribution lineszone-III |
| 4091 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 4092 | Machenical mans 70% |
| 4093 | Manual means 20% |
| 4094 | Filling with Sand in pipe line bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4095 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S and as directed by the departmental officer incharge of work |
| 4096 | 110mm dia. |
| 4097 | 160mm dia. |
| 4098 | 200mm dia. |
| 4099 | 250mm dia. |
| 4100 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4101 | a) Pipe ends - long neck |
| 4102 | 110mm dia. |
| 4103 | 110 mm dia for Air TEEs |
| 4104 | 160mm dia. |
| 4105 | 160 mm dia for Air TEEs |
| 4106 | 200mm dia. |
| 4107 | 200 mm dia for Air TEEs |
| 4108 | 250mm dia. |
| 4109 | 250 mm dia for Air TEEs |
| 4110 | b) MS Flanges |
| 4111 | 110mm dia. |
| 4112 | 110 mm dia for Air TEEs |
| 4113 | 160mm dia. |
| 4114 | 160 mm dia for Air TEEs |
| 4115 | 200mm dia. |
| 4116 | 200 mm dia for Air TEEs |
| 4117 | 250mm dia. |
| 4118 | 250 mm dia for Air TEEs |
| 4119 | c) End Caps |
| 4120 | 160mm dia. |
| 4121 | 200mm dia. |
| 4122 | 250mm dia. |
| 4123 | d) Reducers |
| 4124 | 110X125 mmdia |
| 4125 | 125x140 mm dia |
| 4126 | 140x160 mm dia |
| 4127 | 160x180 mm dia |
| 4128 | 180x200 mm dia |
| 4129 | e) TEES |
| 4130 | 160mm dia. |
| 4131 | 200mm dia. |
| 4132 | 250mm dia. |
| 4133 | F)Bends |
| 4134 | 160mm dia. |
| 4135 | 200mm dia. |
| 4136 | 250mm dia. |
| 4137 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4138 | 110mm dia. |
| 4139 | 160mm dia. |
| 4140 | 200mm dia. |
| 4141 | 250mm dia. |
| 4142 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 4143 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 4144 | 100x1.00m long DF pipes for sluice valves |
| 4145 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 4146 | 150x1.00m long DF pipes for sluice valves |
| 4147 | 200 mm dia x2.00m on 315 and 355 mm dia pipes for scours |
| 4148 | 200x1.00m long DF pipes for sluice valves |
| 4149 | 250x1.00m long DF pipes for sluice valves |
| 4150 | 100 mm dia deck foot bends |
| 4151 | 100x100x80 mm DIDF TEE for air valves |
| 4152 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. PN1.6 - |
| 4153 | 100 mm distrubution |
| 4154 | 150mm dia for distrubution |
| 4155 | 200mm dia for distrubution |
| 4156 | 250mm dia for distrubution |
| 4157 | for scour |
| 4158 | 100mm diaon 110 mm and 160 mm dia mains |
| 4159 | 150 mm dia on 200 and 250 mm dia lines |
| 4160 | 200 mm dia on 315 and 355 mm lines |
| 4161 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 4162 | 80 mm dia on 110 mm pipe |
| 4163 | 80 mm dia on 160 mm pipe |
| 4164 | 80mm dia 200 mm pipe |
| 4165 | 80mm dia 250 mm pipe |
| 4166 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 4167 | 100 mm distrubution |
| 4168 | 150mm dia for distrubution |
| 4169 | 200mm dia for distrubution |
| 4170 | 250mm dia for distrubution |
| 4171 | for scour |
| 4172 | 100mm diaon 110 mm and 160 mm dia mains |
| 4173 | 150 mm dia on 200 and 250 mm dia lines |
| 4174 | 200 mm dia on 315 and 355 mm lines |
| 4175 | Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4176 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4177 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4178 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4179 | Raft0.10m thick |
| 4180 | For side walls0.20m thick 4x1.40=5.6 |
| 4181 | for cover slabs 0.15m thick |
| 4182 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4183 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4184 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4185 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc.,,complete as per S.S and as directed by the departmental officer incharge of work |
| 4186 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4187 | Raft0.10m thick |
| 4188 | For side walls0.20m thick 4x1.40=5.6 |
| 4189 | for cover slabs 0.15m thick |
| 4190 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,, complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4191 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4192 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4193 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4194 | RCC (M20) Nominal Mix using 20mm metal using concrete mixer for sluice/scour/Air val chambers |
| 4195 | Raft0.10m thick |
| 4196 | For side walls0.20m thick 4x1.40=5.60 |
| 4197 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4198 | for cover slabs 0.15 m thick |
| 4199 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4200 | 250mm dia for distrubution |
| 4201 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4202 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4203 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4204 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering ,complete as per S.S and as directed by the departmental officer incharge of workas follows |
| 4205 | Raft0.10m thick |
| 4206 | For side walls0.20m thick 4x1.40=5.60 |
| 4207 | for cover slabs 0.15 m thick |
| 4208 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4209 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4210 | Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 4211 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4212 | RCC (M20) Nominal Mix using 20mm metal using concrete mixer for sluice/scour/Air val chambers |
| 4213 | Raft0.10m thick |
| 4214 | For side walls0.20m thick 4x1.40=5.6 |
| 4215 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4216 | for cover slabs 0.15m thick |
| 4217 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4218 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4219 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4220 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4221 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4222 | Raft0.10m thick |
| 4223 | For side walls0.20m thick 4x1.40=5.6 |
| 4224 | for cover slabs 0.15m thick |
| 4225 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tcomplete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4226 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4227 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4228 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4229 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4230 | Raft0.10m thick |
| 4231 | For side walls0.20m thick 4x1.40=5.60 |
| 4232 | for cover slabs 0.15 m thick |
| 4233 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, , complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4234 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4235 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4236 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4237 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4238 | For side walls0.20m thick 4x1.40=5.6 |
| 4239 | For side walls0.20m thick 4x1.40=5.6 |
| 4240 | for cover slabs 0.15m thick |
| 4241 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, ., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4242 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4243 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4244 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4245 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4246 | Raft0.10m thick |
| 4247 | For side walls0.20m thick 4x1.40=5.6 |
| 4248 | for cover slabs 0.15m thick |
| 4249 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4250 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depthmanual means |
| 4251 | Filling with Sand in Valve chamber bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4252 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 4253 | RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor coverslabs |
| 4254 | Raft0.10m thick |
| 4255 | For side walls0.20m thick 4x1.40=5.60 |
| 4256 | for cover slabs 0.15 m thick |
| 4257 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of valve chambers |
| 4258 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries,as per BIS No.3114/94.complete as per ss and as direceted by the departmental officer incharge of work |
| 4259 | 100 mm |
| 4260 | 150 mm dia |
| 4261 | 200 mm dia |
| 4262 | 250 mm dia |
| 4263 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., BIS No.3114/85.complete as per ss and as direceted by the departmental officer incharge of work |
| 4264 | 100 mm dia |
| 4265 | 150 mm dia |
| 4266 | 200 mm dia |
| 4267 | 250 mm dia |
| 4268 | Cutting and open of C.C. Road surface for pipe line trenches including stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 4269 | Cutting and open of Water bound macadam surface for pipe line trenchesincluding stacking of excavated materials for lying of pipe lines,this rate including hiring of machinary,fuel charges,wages of driver, complete as per the directions of departmental authorities. |
| 4270 | Filling with Crusher Stone dust in valve chambers sand bedding. This rate including cost of Dust,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 4271 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 4272 | Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. for Road restoration. |
| 4273 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 4274 | Providing house service connections on HDPE mains at other side in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 4275 | Providing house service connections on HDPE mains at other side in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 4276 | Providing house service connections on HDPE mains at House holdside in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 4277 | Implementation of Environmental Management plan |
| 4278 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period at SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4279 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodat SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4280 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiodat SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4281 | Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period at SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4282 | Noiselevel(5 Monitoringstation)onceinamonthforthree seasonsduring the constructionperiodat SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4283 | Water Quality Monitoring surface / ground(5 Monitoring station)once in a month for three seasons during theconstructionperiodat SS Tank, sump/pumphouse, WTP, ELSR\"s, pipe line & Distribution network |
| 4284 | Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) inlcuding plantation and Maintainance watering ,Trimming,Pesticides to maintain APCB Norms and as direceted by the departmental officer incharge of work |
| 4285 | Greenbelt development and maintenance in the surroundings / Buffer zone |
| 4286 | Providing Health checkups and free medical distribution centers for awareness health issues as per the APCB Normsand as direceted by the departmental officer incharge of work |
| 4287 | Providing Awareness program/training centers including necessary Training kits,tents,pamplets necessary equipment as direceted by the departmental officer incharge of work |
| 4288 | Sprinkling of wateronce in a day fortwo years (excluding rainy days):400 days @ Rs.1000/trip |
| 4289 | Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs ,General maintainance,services and all incidental charges etc.,as per the departmental officer incharge of work |
| 4290 | Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge. |
| 4291 | Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual as directed by the departmental officer incharge of work |
| 4292 | O&M |
| 4293 | Engaging of Man Mazdoor (Skilled / Semi Skilled) Like Electrician, pump Operator, Mechanic, Helpers, watch man, Filter bed operator, Diploma Engineer, Lab Technician, Technical work inspector etc, as per the requirment. The rate includes wages along with Municipal allowance, conveyancer charges for transporation to the work site including statutory provisions as per norms etccomplete for sucessful by Maintainace of the entire scheme as directed by the departmental officer incharge of the work (for 10 years + 2 years Defect liablity period as follows |
| 4294 | Personal required for operating Intake/Offtake well/Pump housesa)Operator |
| 4295 | b)Fitter/Helper |
| 4296 | c)Watch man |
| 4297 | Personal required at operating Raw water rising mains |
| 4298 | Operator |
| 4299 | Personal required at operating Water treatment plants & Sump |
| 4300 | Operator |
| 4301 | Fitter/Helper |
| 4302 | Lab Technician |
| 4303 | Electrician /Mechanic |
| 4304 | Watch man |
| 4305 | Personal required at operating Clear water rising mains |
| 4306 | Fitter/Helper |
| 4307 | Personal required at operating Gravity mains |
| 4308 | Watch man |
| 4309 | Personal required at operating Service reservoirs |
| 4310 | Watch man |
| 4311 | Personal required at operating distribution system |
| 4312 | Fitter/Helper |
| 4313 | Repairs to pumpsets & Water pipe lines(2 years after execution period) complete as per ss and as directed by the departmental officer incharge of work |
| 4314 | iv)Replacement of glands of sluice valves |
| 4315 | v) Replacements of balls of Air valves |
| 4316 | vi) Greease |
| 4317 | vii) Gland Packing |
| 4318 | Provision towards purchase pipe jointing materials, etc |
| 4319 | LEAKAGES |
| 4320 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete |
| 4321 | 315 mm HDPE Pipes |
| 4322 | 280 mm HDPE Pipes |
| 4323 | 250 mm HDPE Pipes |
| 4324 | 200 mm HDPE Pipes |
| 4325 | 160 mm HDPE Pipes |
| 4326 | 110 mm HDPE Pipes |
| 4327 | I) ESTABLISHMENT : |
| 4328 | Application Engineer (Graduate Engineer)Rate as per Labour Rates LAB-00130 ofCSSR 2025-26 |
| 4329 | System Engineer (Diploma Engineer)Rate as per Labour RatesLAB-00130 ofCSSR 2025-26 |
| 4330 | Sr. Service Engineer(Graduate Engineer )Rate as per Labour Rates LAB-00130 of CSSR 2025-26 |
| 4331 | Data OperatorRate as per Labour Rates LAB-00134 ofCSSR 2025-26 |
| 4332 | Office assistantRate as per Labour Rates LAB-00124 ofCSSR 2025-26 |
| 4333 | II) MAINTAINANCE OF LOCAL CONTROL STATION : |
| 4334 | BSNL Charges for static IP |
| 4335 | Data base management for WEB reporting |
| 4336 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete |
| 4337 | YELESWARAM NAGAR PANCHAYAT |
| 4338 | Construction of 13.00m dia Intakewell cum pumphouse in Yeleru Reservoir |
| 4339 | Well sinking for construction of internal 13.00m dia Intake well cum pump house by Manual or Machanical in sandy and other losse soils under water by using sinker and labour divers or dredgers, weighting the top and stening to assit sinker etc.This rate including cost of all labour charges, dewatering, hireing of machinery fuil charges, wages of driver, transporation of materials, machinery and other incidental charges etc complete as per SS and as directed by the departmental officers incharge of work for following depth |
| 4340 | a) Up to 2.00mdepth from Side wall |
| 4341 | b) 2.00m to 4.00m depth |
| 4342 | c) 4.00m to 6.00m depth |
| 4343 | d) 6.00m to 8.00m depth |
| 4344 | e) 8.00m to 10.00m depth |
| 4345 | f) 10.00m to 11.00m depth |
| 4346 | g) 11.00m to 12.00 depth |
| 4347 | h) 12.00m to 13.00mdepth |
| 4348 | i) 13.00m to 14.00m depth |
| 4349 | j) 14.00m to 15.00mdepth |
| 4350 | k) 15.00m to 16.00m depth |
| 4351 | l) 16.00m to 17.00 m depth |
| 4352 | l) 17.00m to 18.00 m depth |
| 4353 | l) 18.00m to 19.00 m depth |
| 4354 | l) 19.00m to 20.00 m depth |
| 4355 | l) 20.00m to 21.00 m depth |
| 4356 | Plain cement concrete (1:4:8) by using 40mm size hard machine crushed metal with concrete mixer mixingupto plinth level. This rates incluidng cost of materials transporation, machine mixing, vibrating charges, centerings, laying, concrete finishing other incidental charges delifting upto 22.00 mts etc complete as per SS and as directed by the departmental officers incidental charge for well botton plegging |
| 4357 | Providing C.C.mix (M15 grade in open foundations from approved quarries including cost & conveyance of all materials,all labour charges delisting up to 22.00 m depth for machine mixing, laying, vibrating, tamping and curing including all delifts etc., complete as per S.S and as directed by the departmental authorities for well bottom plugging. |
| 4358 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as follows. |
| 4359 | for Well Curb1.5m thick |
| 4360 | Side Wallof the Well of 1.5 M thick upto HFL |
| 4361 | Side Wallof the Well of 1.00M thick upto HFL |
| 4362 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as follows |
| 4363 | a) for Pump house Columns (8+3) |
| 4364 | Centre Beams |
| 4365 | c) for Roof Slab 0.20 m thick including 1.00m walk way |
| 4366 | d) for Lintel Beams alround |
| 4367 | e) for Roof Beams |
| 4368 | f) for Roof slab 0.40m thick 0.45m extension |
| 4369 | g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end |
| 4370 | Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing lifting, seaffolding charges, other incidental charge etc., complete as per S.S and as directed by the departmental officer incharge of work as follows. |
| 4371 | for Super structure of Pump house |
| 4372 | for Pump house Parapet wall |
| 4373 | Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4374 | Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house as per S.S and as directed by the departmental officer incharge of work as follows |
| 4375 | for Pump house inside |
| 4376 | for Parapet wall |
| 4377 | Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903) as directed by the departmental officer incharge of work |
| 4378 | Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing seaffolding, lifting smooth finishing etc., complete and other incidental charge etc complete as directed by the departmental officer incharge of work. |
| 4379 | Painting two coats with snowcem paint or equiled 1st quality of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges, other incidental charges etc., complete as directed by the departmental authorities for super structure walls. |
| 4380 | Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201) for rolling slutter and winder |
| 4381 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 and as directed by the departmental officers incharge of work. |
| 4382 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work as per SS and as directed by the departmental officers incharge of work. |
| 4383 | Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities. |
| 4384 | Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire delifting and all labour charge etc., complete as per S.S and directed by the departmental authorities incharges of work. |
| 4385 | Supply and delivery of 350mm dia \"Resilient Seated SoftSealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15or GGG-50/SG-500/7 or Equivalent as perIS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without glandpacking with 3-O ring protection system on theShaft and Seals of NBR. The Valves should beVacuum tight and 100% leak proof with face toface dimensions as BS:5163 Type A/IS:14846. Allthe valves should be with fusion bondedElectrostatic Powder coating both inside andoutside (Min 250 Microns)- RAL 5005 withPocket Less Straight through body Passageconforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS- 1538 Drilled as per IS:1538. PN16 including cost of materials transportion charges other incidental charges etc complete as directed by the deaprtmental officer incharge of work. |
| 4386 | Supply and delivery of 350mm dia. 2.0m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) endsof K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. incharge of work. |
| 4387 | Supply and delivery of SS/C.I/M.S 12.00m. long operating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities. |
| 4388 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,complete as per ss and as direceted by the departmental officer incharge of work |
| 4389 | Supply and delivery ss 304 gradeoperating Steel Ladder inside the intake well as per the actuals and this rate including cost of ss 304 , fabrication charges, erection at site of work cost of welding charges and other incidental charges etc., complete as per ss and as directed by the departmental officer in charge of work. |
| 4390 | Providing electrification including fixures |
| 4391 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages other incidental charges as per IE Rules and as directed by the departmenal officers incharge of work. |
| 4392 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges other incidental charges as per IE Rules and as directed by the departmenal officers incharge of work |
| 4393 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building other incidental chargesas directed by the departmenal officers incharge of work |
| 4394 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour chargesother incidental charges as per IE Rules and as directed by the departmenal officers incharge of work |
| 4395 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges other incidental charges as per IE Rules and as directed by the departmenal officers incharge of work |
| 4396 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. other incidental charges as per IE Rules and as directed by the departmenal officers incharge of work |
| 4397 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,as per IE Rules and as directed by the departmenal officers incharge of work |
| 4398 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete as per IE Rules and as directed by the departmenal officers incharge of work |
| 4399 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete. as per IE Rules and as directed by the departmenal officers incharge of work |
| 4400 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride as per IE Rules and as directed by the departmenal officers incharge of work |
| 4401 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega as per IE Rules and as directed by the departmenal officers incharge of work |
| 4402 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT as per IE Rules and as directed by the departmenal officers incharge of work |
| 4403 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty. as per IE Rules and as directed by the departmenal officers incharge of work LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs. |
| 4404 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete as per IE Rules and as directed by the departmenal officers incharge of work |
| 4405 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete as per IE Rules and as directed by the departmenal officers incharge of work |
| 4406 | Labour charges Fixing of 20W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.as per IE Rules and as directed by the departmenal officers incharge of work |
| 4407 | Formation of temporary island of 30m diameter in Yeleru Reservoir for Constgruction of 13.00m dia intakewell cum pumphouse. |
| 4408 | Providing and construction of Temporary island of 30.00m. Diameter and 13 metres height for preparation of platform etc.with laying of sand bags in the stipulated places including cost of empty cement bag, sand thread, stiching charges and labourcharges . During theemergency conditions such as floods .and other natural calamities, the above rate is allowed to enhance by 25% for1st warning level and above, keeping in view of the difficulty in availability of labour and vehicles for ring bundby using crane with grap, consumbles, wooden ballies shutable dia and shutable height andbraceings, forconstruction of 8.00m dia Raw water intake well in River in Godavari near Bridge. This rate including cost of all materials,all labour charges conveyance charges and all operational, incidental and labour charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work.. |
| 4409 | Formation of bund/approach ramp with Gravel/Quarry spall from approved quarry including cost and conveyance of all materials and labour charges for formation of protection bund by filling, sectioning, levelling, compacting etc.complete as per S.S and as directed by the departmental officer incharge of work. |
| 4410 | Construction of 60m long RCC Walkway Bridge from Intakewell to Bund in Yeleru Reservoir |
| 4411 | Earthwork in excavationin all Types of soilsfor structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per Specification drawings and as directed by the departmental Officer including all Incidental and operational Charges etc |
| 4412 | Filling Sandin foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges for column bed |
| 4413 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges for column bed |
| 4414 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) asfollows |
| 4415 | Footinggs |
| 4416 | For columns |
| 4417 | For Intermediate Braces |
| 4418 | For Carriage Slab Beams |
| 4419 | For Carriage Slab 0.20m thick |
| 4420 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 4421 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, 3 time tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. as directed by the departmental officer incharge of work. |
| 4422 | Providing 700mm dia DI K9 Raw Water Pumping main from proposed Intake well cum Pump House to proposed WTP at Yeleswaram |
| 4423 | Manufacture supply delivery,of 700mm dia DI K9 centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00, 5.00, 5.50, 6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,etc complete as per SS and as directed by the departmental officer incharge of work. |
| 4424 | Supply and delivery of 700mm dia PN 1.6 \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and transportation. as per SS and as directed by the departmental officer incharge of work |
| 4425 | Supply & Delivery of 150mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and transportation as per SS and as directed by the departmental officer incharge of work |
| 4426 | Manufacture, supply and delivery of 700mm dia DI D/f Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. The rate including cost of pipes, transportation of site, etc., complete. as per SS and as directed by the departmental officer incharge of work |
| 4427 | Manufacture, supply and delivery of 500mm dia Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) including Transportation and other incidental charge charges etc complete as per SS and as directed by the departmental officer incharge of work. |
| 4428 | Cutting the Open BT Road Surface( as well as asphalt concrete upto 75mm thick) including water bound macadam. The rate including labour charges for cutting, all incidental charges, etc., complete as directed by the departmental officer in charge of the work |
| 4429 | Cutting the Open CC road surface with concrete saw cutter and removal with breaker including stacking the ueful material . The rate including labour charges for cutting, all incidental charges, etc., complete as directed by the departmental officer in charge of the work |
| 4430 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work as follows |
| 4431 | Mechanical 70% |
| 4432 | Manual |
| 4433 | Lowering the of 700mm dia DI K9 C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. as per SS and as directed by the departmental officer incharge of work |
| 4434 | Jointing the 700mm dia DI K9C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 as per SS and as directed by the departmental officer incharge of work |
| 4435 | Labour charges for 700mm dia lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves.as per SS and as directed by the departmental officer incharge of work |
| 4436 | Labour charges for 150mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. as per SS and as directed by the departmental officer incharge of work |
| 4437 | Lowering the 700mm dia C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as per SS and as directed by the departmental officer incharge of work |
| 4438 | Jointing of 700mm dia the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.as per SS and as directed by the departmental officer incharge of work |
| 4439 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work |
| 4440 | Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges. |
| 4441 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges |
| 4442 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges. |
| 4443 | Bed |
| 4444 | Walls |
| 4445 | Slab |
| 4446 | C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges for Ancher Block |
| 4447 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.for thrust block |
| 4448 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. The rate including cost and conveyance of steel, binding wire, labour charges for fabrication of grills, placing in position, etc., complete as per SS and as directed by the departmental Officer in charge of the work. |
| 4449 | Provivding 3 Nos 87.50 KW of Raw Water Vertical Turbine pumpsets with a duty of 404 LPS against a head of 33m with 50% stand bye |
| 4450 | Provivding 3 Nos 87.50 KW of Raw Water Vertical Turbine pumpsets with a duty of 404 LPS against a head of 33m with 50% stand bye |
| 4451 | Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes |
| 4452 | Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes |
| 4453 | Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 4454 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 3 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare -1 NoSuitable Phase indicating lamps reputed make - 3 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 4455 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E RulesSupply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top cover |
| 4456 | Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;1) Ring Spanner 3/16 to 1\" - 1No2) Double end spanner set 3/16\" to 1\" - 1 No3) Pipe Wrench 18\" & 4\" - 2Nos 4)Screw drivers 6\", 10\" & 12\" - 3 Nos5) Cutting Plier 12\" - 1No 6) 2 Kgs Hammer with Handle - 1 No7) Nose Plier - 1 No 8) Flat and Half round smooth file - 2 Nos 9) Adjustable Spanner 6\" 10) Column pipe Clamps - 2 pairs 11) Line Shaft Clamps - 1 Pair12) Line rope and clamps double the weight of pump - 2 sets13) Spitter removing Spanner - 1 No 14) Gland thghtening Spanner - 1 No |
| 4457 | Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete1) Fire extiguisher 3Kg capacity - 2 Nos 2) Rubber Mat 6\" x 4\" - 2Nos3) Fire Buckets with stand and three buckets - 1 No 4) Rubber Hand Gloves - 1 Sets5) Danger Board Plates - 4 Nos 6) First aid kit with chart - 1No7) Shock Treatment Chart - 1No 8) Portable rechargeble torch light - 1 No |
| 4458 | Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 4459 | Construction of 32.00 MLD Rapid Gravity Filtration Plant at Head Water Works |
| 4460 | Construction of 32.00 MLD Rapid Gravity Filtration Plant at Head Water Works |
| 4461 | Construction of Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using sand as filter media, compatible with SCADA arrangements, duly following relevant IS codes in the design of plant components including trial running for 90 days etc., including chlorine contact tank & consumables etc., complete. |
| 4462 | NOTE :-a) For Intermediate Capacities proportional rates may be adoptedb) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 60000/- per MT(Fe 500) c) The above rates shall be increased / decreased due to increase / decrease in the cost of cement by Basic Rate x {(Rc-4220)/4220} x 0.07Rc = Rate of cement (Rs per Mt) at the time of preparation of estimated) The above rates shall be increased / decreased due to increase / decrease in the cost of steel byBasic Rate x{ (Rs-63000)/63000} x0.2Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.e) For Rural areas an extra allowance of 10% shall be given on basic rate.i) For SBC below 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 10% on basic rate.ii) For SBC below 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the rate shall be increased by 15% on basic rate.g) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for whichadditional payment shall be made as per field condition. |
| 4463 | h) For components immersed in water Stain less Steel of Grade 304L shall be used. for other components 304 Grade steel shall be used.i) Lab testing equipment of reputed make and consumables for one year. The testing equipment for conducting all laboratory tests shall be installed & training shall be imparted to the Municipal staff.The above rates of Filtration Plants shall include all the following components.A) Civil Works (All works of VRCC Shall be in M30 design mix)1). Stilling Chamber and Aeration cascade2) Pre settling tank shall be provided for 30 MLD and above capacities of WTP for a minimum of 1 hr capacity.3). Raw water channel with Stainless Steel Weir of SS 304 L Grade material and also with digital flow meters4) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS Blades with gear wheel arrangements etc, using 304 L Grade Steel.5-a) Clariflocculator / Flocculation tanks with the components of central driven circular clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L tubes /angular for durability & chemical resistant with wheel arrangements etc, |
| 4464 | 5-b) Two numbers of Clariflocculator shall be provided for WTP\"s of more than 30 MLD capacity.6) Filter house, Chemical house, Alum store, Laboratory room, Chlorination plant room, toilet etc. (All structures shall be provided RCC roof only).Chemical house & Chlorinator rooms are to be isolated and shall be as per CPHEEO manual.7) Wash water tank of suitable capacity shall be constructed at minimum clearance of 2.00m, above the roof slab of Filter beds / any other structure, and the minimum residual head at the top of under drain system shall not be less than 8.0 meters.8) Chlorine contact tank9) All the Doors and Windows shall be of Best Teak wood/Aluminum / UPVC make, except entrance door.The entrance door including shutter infilter house shall be with best teak wood of minimum size of 2.40 X 2.40 mts.a) Main Doors of all individual Buildings shall be made of Best Teak woodb) Other Internal Doors of the buildings shall be of Compressed wood/ Aluminum/ UPVC materials.c) Ventilators shall be provided for each building/structure of suitable size as per NBC standards.10)a) All pipes in Plant shall be of D.I., D/F materials. All Connecting pipes of the plant components such as from Flash mixer to Clariflocculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I., D/F material. The size of sludge disposal pipe shall be minimum of 450 mm dia. with D.I D/F pipe and minimum length of 100 meters.b) All the Valves in Plant shall be heavy duty and as per the specification of SoR item No.28 |
| 4465 | 11) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be sufficiently spaced for easy operation & maintenance and inspection, as per standard norms.12) The bottom level of the wash water control chamber must be above G.L so as to dispose the wash water and sludge from Clariflocculator by gravity to disposal point.Additional specifications13) Railing for all the components (Clariflocculator, Filter House, Staircase etc,.) shall be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia.pipe for top horizotals,25mm dia. for middle row and 40mm dia. verticals spaced at interval of not more than 1.00m c/c.14) Inspection / Path ways in filter beds: Middle pathway: Minimum of 1.50m, Side pathway: Minimum of 1.20m15) i) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room, Laboratory) shall be provided with Non-skid ceramic tiles of approved make & quality, as per standard specifications.ii) All water Channels such as inlet, outlet channels and chambers shall be provided with tiles.16) The basement of the Filtration plant building shall be minimum of 1.20m and pipe gallery shall be minimum 0.3m above the existing nearby Road top level.17) Minimum head room of 2.00m shall be provided, at the alum mixing chambers in alum store for inspection & maintenance. |
| 4466 | 18) The minimum width of entrance hall for the Filter House shall be 4.50m, and Laboratory of min size of 3.30 X 4.50m.18) b) For various components of the WTP should be designed by considering the uplift pressure also.19) a) High efficient Air Blowers shall be installed to the design requirement with low noise pollution, environmental pollution as per PCB guide lines & Testing of blowers as per I.S Standards at site. b) The Piping from Blower to Filter Beds shall be GI and submerged pipe in water shall be HDPE.20) UPVC pipes shall be provided for under drain system. Filter pipe manifolds shall be assembled with HDPE pipes.21) Alum storage capacity shall be designed for minimum period of 90 days. Consumables shall be provided for 2115 Running Hours of WTP.22) Chlorinator :Vacuum type chlorinator shall be provided with following specifications:a) Vacuum operated solution feeding typeVacuum Regulator, Rotameter, Rate setting Valve, built-in NRV, Gas Overflow out let by man folding to mount the system with the unit.b) The unit shall consist of Ejector with necessary accessories such as Check Valve, Drain Valve and Vacuum relief Valves - for control of chlorinator dosage.c) The Accessories and manifolds shall be chlorine resistant and made of carbon steel seam lesspipes, copper tube with brass fittings of suitable size & dimensions, withdiaphragm sealed chlorine pressure gauge arrangements |
| 4467 | d) Water Booster Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with Head ranging from 16 to 35 me) The water & solution carrying pipes shall be made of UPVC material of suitable size incl. all specials such as Tee\"s , Bends, couplings & NRVs and also Pressure Gauges of suitable range.f) Chlorine Gas Leak detector with alarm indicator.The installation includes all necessary accessories, civil and mechanical works, manifold header installations, injector fixing, connection with UPVCpipes, solution piping’s, fixing of motors as per standard specifications and commissioning of Chlorination Plant to the required demand, with a defect liability period of 1 year.The chlorinator of may be of any reputed make or any make of Metito/Toshocow-Jesco Siemens Industrial Devices.g) Life breathing apparatus.h) Chlorine escape BA seti) 2to 10 MLD Plants - 1Kg/hr Chlorinator- For Post Chlorinationii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator - For Post Chlorination.iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator- For Post Chlorination.B) Mechanical Equipment |
| 4468 | 1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical resistance. (Alum tanks must be bound with corrosion resistant material (HDPE Lining, Bitumen Coating, tiles etc)2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical resistance.3) Filtration plant equipment instrumentation and piping.4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge arrangement etc.,5) Pneumatic tyre wheel shall be provided for the bridge Clariflocculator.6) Wash water tank fittings and pump sets with 100% stand by.7) Air blower with motor of 100% stand by and pipe connections made with of SS pipes confirming to SS 304 Grade, in filter bed region.8)Chlorination equipment and pipe connections with chlorinator of 100% standby.9) Spares & Tools for 2 years.10) Gaseous Chlorination with cylinders has to be provided with protection measures.C) Electrical Equipment1) Necessary power supply wiring to motors and switches bus bar connections as per IE Rules |
| 4469 | 2) Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc.3) Erecting mechanical and electrical equipment, trial run for 90 days at 23.50 hours per day testing the treated water as per CPHEEO standards and maintenance of records and imparting training to staff.4) Supply of 6 - Sets of completion plans and maintenance manual and brochures.5) All cables shall be of copper material, Cable ducts shall be covered with MS / Aluminum cheque plate.6) Min LUX levels inside the treatment plant shall be maintained.7) Yard lighting shall be provided as per norms.D ) Equipment for Flow measurements1) Equipment for measuring Conductivity, Turbidity, Ph value, Residual Chlorine with recording & data storage facility (Computer based) & Alarm by SMS or other methods.2) Off - Site Supervisory and Data Acquisition (OSSADA) system forRaw water & Clear water flows by installing Digital Flow meters to measure the flows at Raw water Channel and at each filter bedindividually and combined for measuring the quantities of water treated with a facility to record and store the readings & also to send messages to the assigned designators about the variations/ deficiencies in the flow includingalerts for back wash requirements of filter beds, and recovery of data for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make. The equipment shall have the following specifications. |
| 4470 | Hardware:i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter bed out lets with accessories consists ofii) Electrode Type: General type, Scraper type or replaceable type Electrode made with material of SS external Ultra Touch Sensors as per requirement.iii) CustomizedApplication Requirement : Sensors withInterface logic control board with serial interfaces, including accessories such asAdd-on port, external DC Power Socket, On - sensor Board Buffer,Timer,RS485 Communication,Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags,Interval Power Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication Button and memoryof Data Storage for 30Days ,status of Filter Bed Level indicator, Rating, Readingon LCB Display, Menu Driven Data for sending to Onsite Big Display, operated withBattery Power of any reputed make or any equivalent make. |
| 4471 | iv) Customized Application Requirement:Power Sensors Interface logic control board with support 8 Power Sensing tags, Central System Interfacing Communication, On -board analog to Digit Convert Integrate Circuit of any reputed make or any equivalent make.v) CustomizedApplication Requirement:Centralized System with two serial interfaces, 3 No’s ofAdd-On ports, One external DC Power Socket, On - Board Buffer, On - Board Timer, On - Board RS485 Communication, On - BoardRS 232 Communication, On - Board GPRS/GSM Module, On - Board Voice Chip, On - Board Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory ofData Storage for 30 Days, Total Bed Rating, Reading display on LCD Display, Menu Driven, Menu Navigate Keypad, sending datato theWeb Server, Communication with GPRS , operated withBattery Power of any reputed make or any equivalentmake.Software:The software shall be designed with Web Domain with Data Base Server and Web Name as per the directions of the Departmental Authorities. |
| 4472 | The application of Software for Web design & Desktop shall meet the following requirements:i)Onsite Display: Letters with size of 1.5’ seven Segment LED Display with Interface for each Filter Bed, for Onsite Display, by displaying the Bed Levels, Ratings, Readings in 3 Columns, for each bed of the plant in successive rows and cumulative results at the bottom of the screen.ii) Off Site Display: Letters with size of 1.5’ seven Segment LED Display with Interface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total Cumulative Reading as specified on On-site Display Features.The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level Triggering, before & after Bed wash.The software shall also have the features of sending messages to the mobiles of the Departmental designators indicating Bed Low Levels, Power Supply timings, Bed Wash timings and its status, Power Supply timings and its status Grid View Table, Motor Working time and its status Grid View Table, all trigger events and schedule information and including all Snap View Reports, all Daily, Monthly, Yearly Reports, all Power Working Reports, all Power Events Information etc,. |
| 4473 | Construction of Wash Water Recirculation of sump of 8.00m dia ( 150KL) at WTP |
| 4474 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as follows |
| 4475 | Mechanical Means |
| 4476 | Manual Means |
| 4477 | Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges. |
| 4478 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges |
| 4479 | Supply and placing of the M30 design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer as follows |
| 4480 | Raft |
| 4481 | For side walls circular 0.30m thick |
| 4482 | Columns 0.30 x 0.30m 3.60-0.30 |
| 4483 | Roof beams |
| 4484 | Roof slab0.15m thick 0.786x(7.60^2-3.00^2) |
| 4485 | Roof dome slab 0.15m thick |
| 4486 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 4487 | Painting with two coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade II making making three coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site, Scoffolding, Curing charges and all operational, incidental, labour charges etc. complete for finished item of work for External walls |
| 4488 | Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities |
| 4489 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) |
| 4490 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, 3 time tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.as per SS and as directed by the departmental officer incharge of work |
| 4491 | Supply, Delivery, Errection and Trial running of 2 Nos of 2.61KW CF pumpsets each with a duty of 12LPS against a total head of 15m ( one stand bye) for pumping wash water to aerator for recirculation |
| 4492 | Supply and erection of 2# of 2.61 KW CF Pumpsets each with a duty of 12 LPS and a total head of 15m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation |
| 4493 | Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc. This rate including cost of pumpset transporation charges, all labour charges for exetion and other incidental charges etc complete as per IE Rules and as directed by the departmental other incharge of work. |
| 4494 | Providing 350mm/250mm/150mm/100 mm dia DI K7 Gravity main to various ELSRS in the town |
| 4495 | Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00, 5.00, 5.50, 6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K7) including transportation ,loading,unloading, stacking,etc complete as per SS and as directed by the departmental officer incharge of work as follows |
| 4496 | 350mm dia DI K7 |
| 4497 | 250mm dia DI K7 |
| 4498 | 150mm dia DI K7 |
| 4499 | 100mm dia DI K7 |
| 4500 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including and transportation. other incidental charges etc complet as follows. |
| 4501 | 350mm dia PN 16 |
| 4502 | 250mm dia PN 16 |
| 4503 | 150mm dia PN 16 |
| 4504 | 100mm diaPN 16 |
| 4505 | Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and transportation |
| 4506 | Manufacture, supply and delivery of Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. The rate including cost of pipes, transportation of site, etc., complete. as follows |
| 4507 | 350mm x 1.00m Pipe |
| 4508 | 250mm x 1.00mPipe |
| 4509 | 150mm x 1.00m Pipe |
| 4510 | 100mm x 1.00m Pipe |
| 4511 | Manufacture, supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) including Transportation and other incidental charge. |
| 4512 | Cutting the Open BT Road Surface( as well as asphalt concrete upto 75mm thick) including water bound macadam. The rate including labour charges for cutting, all incidental charges, etc., complete as directed by the departmental officer in charge of the work |
| 4513 | Cutting the Open CC road for pipeline tranch portion surface with concrete saw cutter and removal with breaker including stacking the ueful material . The rate including labour charges for cutting, all incidental charges, etc., complete as directed by the departmental officer in charge of the work |
| 4514 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work |
| 4515 | Mechanical 70% |
| 4516 | Manual |
| 4517 | Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 as follows |
| 4518 | 350mm dia DI K7 |
| 4519 | 250mm dia DI K7 |
| 4520 | 150mm dia DI K7 |
| 4521 | 100mm dia DI K7 |
| 4522 | Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 as follows |
| 4523 | 350mm dia DI K7 |
| 4524 | 250mm dia DI K7 |
| 4525 | 150mm dia DI K7 |
| 4526 | 100mm dia DI K7 |
| 4527 | Labour charges for lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. as follows |
| 4528 | 350mm dia |
| 4529 | 250mm dia |
| 4530 | 150mm dia |
| 4531 | 100mm dia |
| 4532 | Labour charges for 80mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 4533 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. as follows |
| 4534 | 350mm dia |
| 4535 | 250mm dia |
| 4536 | 150mm dia |
| 4537 | 100mm dia |
| 4538 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. as follows |
| 4539 | 350mm dia |
| 4540 | 250mm dia |
| 4541 | 150mm dia |
| 4542 | 100mm dia |
| 4543 | Construction of Valve Pits, Anchor Blocks, Thrust Blocks |
| 4544 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work |
| 4545 | Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges. |
| 4546 | Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges |
| 4547 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges. |
| 4548 | Bed |
| 4549 | Walls |
| 4550 | Slab |
| 4551 | C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges for Ancher Block |
| 4552 | R.C.C grade M 20 (Nominal Mix) using 20mm &10mm metal. The rate including cost and conveyance of all material,labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges for ancher Block |
| 4553 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. The rate including cost and conveyance of steel, binding wire, labour charges for fabrication of grills, placing in position, etc., complete as per SS and as directed by the departmental Officer in charge of the work. |
| 4554 | Construction of 850KL Capacity ELSR at YPC Junction with a staging of 20m ( Balance work) |
| 4555 | Construction of 850KL Capacity ELSR at YPC Junction with a staging of 20m ( Balance work), withSeismic analysis.All concrete components shall be designed with M30 Design Mix proportion.The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.For SBC below 10T/Sqm , solid raft shall be provided For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL. |
| 4556 | The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL.14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost.15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be: |
| 4557 | a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia.b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No |
| 4558 | viii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No. |
| 4559 | xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work. |
| 4560 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted.xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases. |
| 4561 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 4562 | Construction of 800 KL Capacity ELSR at YPC Junction with a staging of 20m ( Balance work) |
| 4563 | Construction of 800 KL Capacity ELSR at YPC Junction with a staging of 20m ( Balance work) withSeismic analysis. |
| 4564 | All concrete components shall be designed with M30 Design Mix proportion.The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.For SBC below 10T/Sqm , solid raft shall be providedFor SBC below 10T/Sqm , solid raft shall be provided For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL. |
| 4565 | 14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost.15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia. |
| 4566 | c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia.Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 Noviii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry. |
| 4567 | ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c.xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No. |
| 4568 | xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards. |
| 4569 | Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work.Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted. |
| 4570 | xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases.MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 4571 | Construction of Local Scada Room 8.00 x 12.00 Size at WTP |
| 4572 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means. |
| 4573 | Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101). |
| 4574 | Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete.as per SS and as directed by the departmental officer incharge of work. |
| 4575 | Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work. |
| 4576 | Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed. |
| 4577 | Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank. |
| 4578 | Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as follows. |
| 4579 | Footings |
| 4580 | Pedastals around Columns |
| 4581 | Columns Up to plinth |
| 4582 | Plinth Beams 300 x 400 |
| 4583 | Columns |
| 4584 | Up to First Floor Roof Level |
| 4585 | Beams 230 x 500 |
| 4586 | Lintels |
| 4587 | Sunshades |
| 4588 | Staircase slab 0.15 m thick |
| 4589 | RCC Slab 150mm thick |
| 4590 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 4591 | Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1) as follows. |
| 4592 | For Ground Floor Level |
| 4593 | For First Floor Level |
| 4594 | 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials. |
| 4595 | Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 4596 | For Ground Floor |
| 4597 | For First Floor |
| 4598 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 4599 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 4600 | Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials. |
| 4601 | Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. |
| 4602 | Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. |
| 4603 | Painting Walls with two coat Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) |
| 4604 | Painting Walls with two coat Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) |
| 4605 | Painting Walls with two coat Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) |
| 4606 | Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door |
| 4607 | Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work. |
| 4608 | Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51). |
| 4609 | Supplying and fixing of Top Hung Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, The Ventilator to be panelled 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work |
| 4610 | Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work |
| 4611 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages |
| 4612 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages |
| 4613 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building |
| 4614 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges |
| 4615 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges |
| 4616 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. |
| 4617 | supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., |
| 4618 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete |
| 4619 | Supply and fixing TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3 |
| 4620 | Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride |
| 4621 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega |
| 4622 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years as per IE Rules and as directed by the departmental officer incharge of work warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs. |
| 4623 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete |
| 4624 | Labour charges for Fixing of towtube light luminaiu on wall / ceiling with tw ground blockes well all accsseries includeing giving connectionswith twin core wire etc., complete |
| 4625 | Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White |
| 4626 | Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.as per IE Rules and as directed by the departmental officer incharges of work |
| 4627 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks |
| 4628 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work |
| 4629 | SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 4630 | Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors |
| 4631 | Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors. |
| 4632 | Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work. |
| 4633 | Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors |
| 4634 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 4635 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 4636 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 4637 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 4638 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg as per SS and as directed by the departmental officer incharge of work |
| 4639 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete as follows |
| 4640 | 25 mm dia nominal bore -from tank to jn forof individual lines and inlet |
| 4641 | 20 mm dia nominal bore -fromjn forof individual lines to toilets |
| 4642 | 15 mm dia nominal bore -for internal |
| 4643 | S&F of GI & GM fittings |
| 4644 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 4645 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 4646 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 4647 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 4648 | S& F GI union Ist Quality |
| 4649 | 12.70mm |
| 4650 | 19.05mm |
| 4651 | 25.40mm |
| 4652 | Carting away the surplus excavated materialsi.e., earthfrom the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete |
| 4653 | Providing Environmanagement Plan |
| 4654 | Monitoring Costs : Construction Phase(Two years) |
| 4655 | Air Quality Monitoring (4 Monitoring station) once in a month for three seasons during the construction period at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network. This rate including cost of all labour charges other incidental charges etc complete |
| 4656 | Noiselevel(4Monitoringstation)onceinamonthforthree seasonsduring the constructionperiod Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network. This rate including cost of all labour charges other incidental charges etc complete |
| 4657 | Water Quality Monitoring surface / ground(4 Monitoring station)once in a month for three seasons during theconstructionperiod at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network. This rate including cost of all labour charges other incidental charges etc complete |
| 4658 | Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)-plants & tree guards. This rate including cost of all labour charges other incidental charges etc complete |
| 4659 | Sprinkling of wateronce in a day fortwo years (excluding rainy days):. This rates including cost of water, transportion charges charges wages of driver, fuil charge, and other incidental charge etc., |
| 4660 | Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc., |
| 4661 | Providing HDPE/ DI Distribution net work in Zone-1 area |
| 4662 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 4663 | Machenical mans 70% |
| 4664 | Manual means 30% |
| 4665 | Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering ramming other incidental charge etc complete and as directed by the Engineer-in-Charge of the work. |
| 4666 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including etc. complete as per S.S and as directed by the departmental officer incharge of work. |
| 4667 | 110mm dia. |
| 4668 | 160mm dia. |
| 4669 | 200mm dia. |
| 4670 | 250mm dia. |
| 4671 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete |
| 4672 | a) Pipe ends - long neck |
| 4673 | 110mm dia. |
| 4674 | 110 mm dia for Air TEEs |
| 4675 | 160mm dia. |
| 4676 | 160 mm dia for Air TEEs |
| 4677 | 200mm dia. |
| 4678 | 200 mm dia for Air TEEs |
| 4679 | b) MS Flanges |
| 4680 | 110mm dia. |
| 4681 | 110 mm dia for Air TEEs |
| 4682 | 160mm dia. |
| 4683 | 160 mm dia for Air TEEs |
| 4684 | 200mm dia. |
| 4685 | 200 mm dia for Air TEEs |
| 4686 | c) End Caps |
| 4687 | 110mm dia. |
| 4688 | 160mm dia. |
| 4689 | 200mm dia. |
| 4690 | 250mm dia. |
| 4691 | d) Reducers |
| 4692 | 110X125 mmdia |
| 4693 | 125x140 mm dia |
| 4694 | 140x160 mm dia |
| 4695 | 160x180 mm dia |
| 4696 | 180x200 mm dia |
| 4697 | e) TEES |
| 4698 | 110mm dia. |
| 4699 | 160mm dia. |
| 4700 | 200mm dia. |
| 4701 | 250mm dia. |
| 4702 | F)Bends |
| 4703 | 110mm dia. |
| 4704 | 160mm dia. |
| 4705 | 200mm dia. |
| 4706 | 250mm dia. |
| 4707 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4708 | 110mm dia. |
| 4709 | 160mm dia. |
| 4710 | 200mm dia. |
| 4711 | 250mm dia. |
| 4712 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities as follows |
| 4713 | DIDF pipes for scours |
| 4714 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 4715 | 100x1.00m long DF pipes for sluice valves |
| 4716 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 4717 | 150x1.00m long DF pipes for sluice valves |
| 4718 | 200 mm dia x2.00m on 315 and 355 mm dia pipes for scours |
| 4719 | 200x1.00m long DF pipes for sluice valves |
| 4720 | 250x1.00m long DF pipes for sluice valves |
| 4721 | 100 mm dia deck foot bends |
| 4722 | 100x100x80 mm DIDF TEE for air valves |
| 4723 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. PN16 -as per SS and directed by the departmental officer incharge of work as follows. |
| 4724 | 100 mm distrubution |
| 4725 | 150mm dia for distrubution |
| 4726 | 200mm dia for distrubution |
| 4727 | 250mm dia for distrubution |
| 4728 | for scour |
| 4729 | 100mm diaon 110 mm and 160 mm dia mains |
| 4730 | 150 mm dia on 200 and 250 mm dia lines |
| 4731 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 4732 | 80 mm dia on 110 mm pipe |
| 4733 | 80 mm dia on 160 mm pipe |
| 4734 | 80mm dia 200 mm pipe |
| 4735 | 80mm dia 250 mm pipe |
| 4736 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 4737 | 100 mm distrubution |
| 4738 | 150mm dia for distrubution |
| 4739 | 200mm dia for distrubution |
| 4740 | 250mm dia for distrubution |
| 4741 | for scour |
| 4742 | 100mm diaon 110 mm and 160 mm dia mains |
| 4743 | 150 mm dia on 200 and 250 mm dia lines |
| 4744 | Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs Earth work execavation, sand bedding, VCC 1:4:8 etc. including cost and conveyance of all material and all labour charges other incidental charges as per approved type design etc. complete as per S.S for finished item of work |
| 4745 | 100 mm distrubution |
| 4746 | 150mm dia for distrubution |
| 4747 | 200mm dia for distrubution |
| 4748 | 250mm dia for distrubution |
| 4749 | for scour |
| 4750 | 100mm diaon 110 mm and 160 mm dia mains |
| 4751 | 150 mm dia on 200 and 250 mm dia lines |
| 4752 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs as over land etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work |
| 4753 | 80 mm dia on 110 mm pipe |
| 4754 | 80 mm dia on 160 mm pipe |
| 4755 | 80mm dia 200 mm pipe |
| 4756 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 as follows |
| 4757 | 100 mm |
| 4758 | 150 mm dia |
| 4759 | 200 mm dia |
| 4760 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 4761 | 100 mm dia |
| 4762 | 150 mm dia |
| 4763 | 200 mm dia |
| 4764 | 250 mm dia |
| 4765 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4766 | Cutting the CC road surface for pipeline trech portion . The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4767 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4768 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration |
| 4769 | BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 4770 | Providing HDPE/ DI Distribution net work in Zone-2 area |
| 4771 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 4772 | Machenical mans 70% |
| 4773 | Manual means 20% |
| 4774 | Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling |
| 4775 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S and as directed by the departmental officer incharge of work. |
| 4776 | 110mm dia. |
| 4777 | 160mm dia. |
| 4778 | 200mm dia. |
| 4779 | 250mm dia. |
| 4780 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stackingetc.complete as per SS and as directed by the departmental officer incharge of work. |
| 4781 | a) Pipe ends - long neck |
| 4782 | 110mm dia. |
| 4783 | 110 mm dia for Air TEEs |
| 4784 | 160mm dia. |
| 4785 | 160 mm dia for Air TEEs |
| 4786 | 200mm dia. |
| 4787 | 200 mm dia for Air TEEs |
| 4788 | b) MS Flanges |
| 4789 | 110mm dia. |
| 4790 | 110 mm dia for Air TEEs |
| 4791 | 160mm dia. |
| 4792 | 160 mm dia for Air TEEs |
| 4793 | 200mm dia. |
| 4794 | 200 mm dia for Air TEEs |
| 4795 | c) End Caps |
| 4796 | 110mm dia. |
| 4797 | 160mm dia. |
| 4798 | 200mm dia. |
| 4799 | d) Reducers |
| 4800 | 110X125 mmdia |
| 4801 | 125x140 mm dia |
| 4802 | 140x160 mm dia |
| 4803 | 160x180 mm dia |
| 4804 | 180x200 mm dia |
| 4805 | e) TEES |
| 4806 | 110mm dia. |
| 4807 | 160mm dia. |
| 4808 | 200mm dia. |
| 4809 | 250mm dia. |
| 4810 | F)Bends |
| 4811 | 110mm dia. |
| 4812 | 160mm dia. |
| 4813 | 200mm dia. |
| 4814 | 250mm dia. |
| 4815 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4816 | 110mm dia. |
| 4817 | 160mm dia. |
| 4818 | 200mm dia. |
| 4819 | 250mm dia. |
| 4820 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 4821 | DIDF pipes for scours |
| 4822 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 4823 | 100x1.00m long DF pipes for sluice valves |
| 4824 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 4825 | 150x1.00m long DF pipes for sluice valves |
| 4826 | 200x1.00m long DF pipes for sluice valves |
| 4827 | 250x1.00m long DF pipes for sluice valves |
| 4828 | 100 mm dia deck foot bends |
| 4829 | 100x100x80 mm DIDF TEE for air valves |
| 4830 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -as directed by the departmental officer incharge of work. |
| 4831 | 100 mm distrubution |
| 4832 | 150mm dia for distrubution |
| 4833 | 200mm dia for distrubution |
| 4834 | 100mm diaon 110 mm and 160 mm dia mains |
| 4835 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 4836 | 80 mm dia on 110 mm pipe |
| 4837 | 80 mm dia on 160 mm pipe |
| 4838 | 80mm dia 200 mm pipe |
| 4839 | 80mm dia 250 mm pipe |
| 4840 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves and as directed by the departmental officer incharge of work. |
| 4841 | 100 mm distrubution |
| 4842 | 150mm dia for distrubution |
| 4843 | 200mm dia for distrubution |
| 4844 | 100mm diaon 110 mm and 160 mm dia mains |
| 4845 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) propall material and all labour charges etc. complete as per S.S for finished item of work |
| 4846 | 100 mm distrubution |
| 4847 | 150mm dia for distrubution |
| 4848 | 200mm dia for distrubution |
| 4849 | 250mm dia for distrubution |
| 4850 | 100mm diaon 110 mm and 160 mm dia mains |
| 4851 | 150 mm dia on 200 and 250 mm dia lines |
| 4852 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work |
| 4853 | 80 mm dia on 110 mm pipe |
| 4854 | 80 mm dia on 160 mm pipe |
| 4855 | 80mm dia 200 mm pipe |
| 4856 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 4857 | 100 mm |
| 4858 | 150 mm dia |
| 4859 | 200 mm dia |
| 4860 | 250 mm dia |
| 4861 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 4862 | 100 mm dia |
| 4863 | 150 mm dia |
| 4864 | 200 mm dia |
| 4865 | 250 mm dia |
| 4866 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4867 | Cutting the CC road surface for pipeline trench cutting portion. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4868 | Cutting the open water bound macadam for pipeline trench cutting portion. The rate including labour charges for cutting, incidental charges fixing of machinery, fuil charge, wage of driver other incidental charge etc., complete as directed by the departmental officer in charge of the work. |
| 4869 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration |
| 4870 | BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 4871 | Providing HDPE/ DI Distribution net work in Zone-3 area |
| 4872 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 4873 | Machenical mans 70% |
| 4874 | Manual means 20% |
| 4875 | Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering ramming other incidental charge etc complete and as directed by the Engineer-in-Charge of the work. |
| 4876 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S |
| 4877 | 110mm dia. |
| 4878 | 160mm dia. |
| 4879 | 200mm dia. |
| 4880 | 250mm dia. |
| 4881 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as directed by the departmental other incidental incharge of work. |
| 4882 | a) Pipe ends - long neck |
| 4883 | 110mm dia. |
| 4884 | 110 mm dia for Air TEEs |
| 4885 | 160mm dia. |
| 4886 | 160 mm dia for Air TEEs |
| 4887 | 200mm dia. |
| 4888 | 200 mm dia for Air TEEs |
| 4889 | 250mm dia. |
| 4890 | b) MS Flanges |
| 4891 | 110mm dia. |
| 4892 | 110 mm dia for Air TEEs |
| 4893 | 160mm dia. |
| 4894 | 160 mm dia for Air TEEs |
| 4895 | 200mm dia. |
| 4896 | 200 mm dia for Air TEEs |
| 4897 | 250mm dia. |
| 4898 | c) End Caps |
| 4899 | 110mm dia. |
| 4900 | 160mm dia. |
| 4901 | 200mm dia. |
| 4902 | d) Reducers |
| 4903 | 110X125 mmdia |
| 4904 | 125x140 mm dia |
| 4905 | 140x160 mm dia |
| 4906 | 160x180 mm dia |
| 4907 | 180x200 mm dia |
| 4908 | e) TEES |
| 4909 | 110mm dia. |
| 4910 | 160mm dia. |
| 4911 | 200mm dia. |
| 4912 | 250mm dia. |
| 4913 | F)Bends |
| 4914 | 110mm dia. |
| 4915 | 160mm dia. |
| 4916 | 200mm dia. |
| 4917 | 250mm dia. |
| 4918 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 4919 | 110mm dia. |
| 4920 | 160mm dia. |
| 4921 | 200mm dia. |
| 4922 | 250mm dia. |
| 4923 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 4924 | DIDF pipes for scours |
| 4925 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 4926 | 100x1.00m long DF pipes for sluice valves |
| 4927 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 4928 | 150x1.00m long DF pipes for sluice valves |
| 4929 | 200x1.00m long DF pipes for sluice valves |
| 4930 | 250x1.00m long DF pipes for sluice valves |
| 4931 | 100 mm dia deck foot bends |
| 4932 | 100x100x80 mm DIDF TEE for air valves |
| 4933 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation. PN16 - |
| 4934 | 100 mm distrubution |
| 4935 | 150mm dia for distrubution |
| 4936 | 200mm dia for distrubution |
| 4937 | 250mm dia for distrubution |
| 4938 | for scour |
| 4939 | 100mm diaon 110 mm and 160 mm dia mains |
| 4940 | 150 mm dia on 200 and 250 mm dia lines |
| 4941 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 as follows |
| 4942 | 80 mm dia on 110 mm pipe |
| 4943 | 80 mm dia on 160 mm pipe |
| 4944 | 80mm dia 200 mm pipe |
| 4945 | 80mm dia 250 mm pipe |
| 4946 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 4947 | 100 mm distrubution |
| 4948 | 150mm dia for distrubution |
| 4949 | 200mm dia for distrubution |
| 4950 | 250mm dia for distrubution |
| 4951 | for scour |
| 4952 | 100mm diaon 110 mm and 160 mm dia mains |
| 4953 | 150 mm dia on 200 and 250 mm dia lines |
| 4954 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) propall material and all labour chargesetc. complete as per S.S for finished item of work |
| 4955 | 100 mm distrubution |
| 4956 | 150mm dia for distrubution |
| 4957 | 200mm dia for distrubution |
| 4958 | 250mm dia for distrubution |
| 4959 | for scour |
| 4960 | 100mm diaon 110 mm and 160 mm dia mains |
| 4961 | 150 mm dia on 200 and 250 mm dia lines |
| 4962 | Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work |
| 4963 | 80 mm dia on 110 mm pipe |
| 4964 | 80 mm dia on 160 mm pipe |
| 4965 | 80mm dia 200 mm pipe |
| 4966 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 4967 | 100 mm |
| 4968 | 150 mm dia |
| 4969 | 200 mm dia |
| 4970 | 250 mm dia |
| 4971 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 4972 | 100 mm dia |
| 4973 | 150 mm dia |
| 4974 | 200 mm dia |
| 4975 | 250 mm dia |
| 4976 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4977 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4978 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 4979 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration |
| 4980 | BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 4981 | Providing HDPE/ DI Distribution net work in Zone-4 area |
| 4982 | Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches. |
| 4983 | Machenical mans 70% |
| 4984 | Manual means 20% |
| 4985 | Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering ramming other incidental charge etc complete and as directed by the Engineer-in-Charge of the work. |
| 4986 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S |
| 4987 | 110mm dia. |
| 4988 | 160mm dia. |
| 4989 | 200mm dia. |
| 4990 | 250mm dia. |
| 4991 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete |
| 4992 | a) Pipe ends - long neck |
| 4993 | 110mm dia. |
| 4994 | 110 mm dia for Air TEEs |
| 4995 | 160mm dia. |
| 4996 | 160 mm dia for Air TEEs |
| 4997 | 200mm dia. |
| 4998 | 200 mm dia for Air TEEs |
| 4999 | b) MS Flanges |
| 5000 | 110mm dia. |
| 5001 | 110 mm dia for Air TEEs |
| 5002 | 160mm dia. |
| 5003 | 160 mm dia for Air TEEs |
| 5004 | 200 mm dia for Air TEEs |
| 5005 | c) End Caps |
| 5006 | 110mm dia. |
| 5007 | 160mm dia. |
| 5008 | 200mm dia. |
| 5009 | d) Reducers |
| 5010 | 110X125 mmdia |
| 5011 | 125x140 mm dia |
| 5012 | 140x160 mm dia |
| 5013 | 355x405 mm dia |
| 5014 | e) TEES |
| 5015 | 110mm dia. |
| 5016 | 160mm dia. |
| 5017 | 200mm dia. |
| 5018 | 250mm dia. |
| 5019 | 400 mm dia |
| 5020 | F)Bends |
| 5021 | 110mm dia. |
| 5022 | 160mm dia. |
| 5023 | 200mm dia. |
| 5024 | 250mm dia. |
| 5025 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S and as directed by the departmental officer incharge of work |
| 5026 | 110mm dia. |
| 5027 | 160mm dia. |
| 5028 | 250mm dia. |
| 5029 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 5030 | DIDF pipes for scours |
| 5031 | 100X2.00m on 110 and 160 mm dia mains for scours |
| 5032 | 100x1.00m long DF pipes for sluice valves |
| 5033 | 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours |
| 5034 | 150x1.00m long DF pipes for sluice valves |
| 5035 | 200x1.00m long DF pipes for sluice valves |
| 5036 | 250x1.00m long DF pipes for sluice valves |
| 5037 | 100 mm dia deck foot bends |
| 5038 | 100x100x80 mm DIDF TEE for air valves |
| 5039 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and including transportation. PN16 -as directed by the departmental officer incharge of work. |
| 5040 | 100 mm distrubution |
| 5041 | 150mm dia for distrubution |
| 5042 | 100mm diaon 110 mm and 160 mm dia mains |
| 5043 | 150 mm dia on 200 and 250 mm dia lines |
| 5044 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 5045 | 80 mm dia on 110 mm pipe |
| 5046 | 80 mm dia on 160 mm pipe |
| 5047 | 80mm dia 200 mm pipe |
| 5048 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as per SS and as directed by the departmental officer incharge of work. |
| 5049 | 100 mm distrubution |
| 5050 | 150mm dia for distrubution |
| 5051 | 100mm diaon 110 mm and 160 mm dia mains |
| 5052 | 150 mm dia on 200 and 250 mm dia lines |
| 5053 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) propall material and all labour charges etc. complete as per S.S for finished item of work |
| 5054 | 100 mm distrubution |
| 5055 | 150mm dia for distrubution |
| 5056 | 100mm diaon 110 mm and 160 mm dia mains |
| 5057 | 150 mm dia on 200 and 250 mm dia lines |
| 5058 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop all material and all labour charges etc. complete as per S.S for finished item of work |
| 5059 | 80 mm dia on 110 mm pipe |
| 5060 | 80 mm dia on 160 mm pipe |
| 5061 | 80mm dia 200 mm pipe |
| 5062 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 5063 | 100 mm |
| 5064 | 100 mm |
| 5065 | 150 mm dia |
| 5066 | 200x1.00m long DF pipes for sluice valves |
| 5067 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per SS and as directed by the departmental officer incharge of work. BIS No.3114/85. |
| 5068 | 100 mm dia |
| 5069 | 150 mm dia |
| 5070 | 200 mm dia |
| 5071 | 250 mm dia |
| 5072 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 5073 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 5074 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 5075 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration |
| 5076 | BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 5077 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 5078 | Providing house service connections on HDPE mains at other side in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 5079 | Providing house service connections on HDPE mains at other side in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 5080 | Providing house service connections on HDPE mains at House holdside in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 5081 | Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge. |
| 5082 | Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual |
| 5083 | Operation and Maintenance for the Seven (7) Yearsincluding Defect Liability Period-From Source to ELSR\"s |
| 5084 | Engaging of Man Mazdoor (Skilled / Semi Skilled) Like Electrician, pump Operator, Mechanic, Helpers, watch man, Filter bed operator, Diploma Engineer, Lab Technician, Technical work inspector etc, as per the requirment. The rate includes wages along with Municipal allowance, conveyancer charges for transporation to the work site including statutory provisions as per norms etccomplete for sucessful by Maintainace of the entire scheme as directed by the departmental officer incharge of the work (for 7 years + 2 years Defect liablity period as follows |
| 5085 | Operator |
| 5086 | Fitter/Helper |
| 5087 | Watch man |
| 5088 | Personal required at operating Raw water rising mainsFitter/Helper |
| 5089 | Personal required at operating Water treatment plants & SumpOperator |
| 5090 | Personal required at operating Water treatment plants & SumpFitter/Helper |
| 5091 | Personal required at operating Water treatment plants & SumpLab Technician |
| 5092 | Personal required at operating Water treatment plants & SumpElectrician /Mechanic |
| 5093 | Personal required at operating Water treatment plants & SumpWatch man |
| 5094 | Personal required at operating Clear water rising mains and Distribution linesFitter/Helper |
| 5095 | Personal required at operating Gravity mains Watch man |
| 5096 | Personal required at operating Service reservoirsWatch man |
| 5097 | Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines.1st year |
| 5098 | B) Alumino -Ferric (Alum) @ 20 mg/Lt |
| 5099 | Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including etc., complete.rement at 15 mg/lit1st year |
| 5100 | Repairs to pumpsets & Water pipe lines(2 years after execution period) |
| 5101 | i) Replacement of bearings of pumpsets |
| 5102 | ii) Replacement of sleeves |
| 5103 | iii) Rewinding of Motors |
| 5104 | iv) Raw Water Motors |
| 5105 | Clear Water Motors |
| 5106 | iv)Replacement of glands of sluice valves |
| 5107 | v) Replacements of balls of Air valves |
| 5108 | vi) Greease |
| 5109 | vii) Gland Packing |
| 5110 | Operation and Maintenance for the Seven (7) Yearsincluding Defect Liability Period-For Distribution network |
| 5111 | Personal required at operating distribution systemFitter/Helper |
| 5112 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete |
| 5113 | 110mm Dia |
| 5114 | 160mm Dia |
| 5115 | 200mm Dia |
| 5116 | 250mm Dia |
| 5117 | Operation and Maintenance for Local SCADA at ULB |
| 5118 | Jr. Service Engineer (Diploma Engineer)To asist to attend the service calls by the seniour service engineer |
| 5119 | Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the GVMC Officials for obtaining of required information when ever asks. |
| 5120 | Office assistant To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 5121 | Replacement of necessary servicable materials(Reagents) for Chlorine AnalysersEach Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuets. |
| 5122 | Replacement of necessary tranducers for PH analysers |
| 5123 | Replacement of necessary tranducers for Turbidity analysers |
| 5124 | BSNL Charges for static IP Interconnection for Data receive station from all Local Contol RTU panels. |
| 5125 | Data transfer from RTU control panels |
| 5126 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day operation and reporting to the departmental officers |
| 5127 | Operation and Maintenance forCentral SCADA for ULB |
| 5128 | Application Engineer(Graduate Engineer) To monitor all issues related to both operation & service |
| 5129 | System Engineer(Diploma Engineer) To monitor all meters location through SCADA station and give feedback to the service engineers. |
| 5130 | Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks. |
| 5131 | Office assistant To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 5132 | BSNL Charges for static IP Interconnection for Data receive station from all Local Contol RTU panels. |
| 5133 | Data base management for WEB reporting Data storage and reporting system for view through WEB and Mobile networks |
| 5134 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day operation and reporting to the departmental officers |
| 5135 | MUMMIDIVARAM NAGAR PANCHAYAT |
| 5136 | Construction of Raw Water Intake Well in River Godavari at Bobbarlanka |
| 5137 | Well sinking in sandy and other loose soils under water either by manual labour,divers,or dredgers,weighing the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00m |
| 5138 | a) Up to 2.00m depth |
| 5139 | b) 2.00m to 4.00m depth |
| 5140 | c) 4.00m to 6.00m depth |
| 5141 | d) 6.00m to 8.00m depth |
| 5142 | e) 8.00m to 10.00m depth |
| 5143 | f) 10.00m to 11.00m depth |
| 5144 | g) 11.00m to 12.00m depth |
| 5145 | h) 12.00m to 13.00m depth |
| 5146 | i) 13.00m to 14.00m depth |
| 5147 | j) 14.00m to 15.00m depth |
| 5148 | k) 15.00m to 16.00m depth |
| 5149 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as directed by the departmental officer incharge of work |
| 5150 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) |
| 5151 | a) for Base slab & Plugging |
| 5152 | b) for Well Curb0.50m thick |
| 5153 | Side Wallof the Well of 0.50m thick upto Normal water level+0.50m +14.50m(-)+0.00m |
| 5154 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5155 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5156 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5157 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5158 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5159 | Side Wallof the Well of 0.50m thick uptobottom of floor slab to Normal water level + 22.22m to +14.50m=7.72m |
| 5160 | platform for placing Sluice Valves |
| 5161 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) |
| 5162 | a) for Pump house Columns |
| 5163 | b) for floor beams |
| 5164 | c) for Floor Slab 0.25m thick with allrouns walk way |
| 5165 | d) ring Beams at lintel level |
| 5166 | e) for Roof Beams |
| 5167 | f) for Roof slab 0.15m thick with slab extension 0.30m |
| 5168 | g) for Sunshade of 0.60m wide and thickness of .075m at fixed end and 0.05m.at free end |
| 5169 | Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing,lifting,scaffolding etc., complete as per ss and as directed by the departmental officer incharge of work as follows |
| 5170 | for Super structure of Pump house |
| 5171 | for Pump house Parapet wall |
| 5172 | Supply and fixing of 50mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per ss and as directed by the departmental officer incharge of work |
| 5173 | Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges,lifting,scaffolding and other incidental charges etc for finishing and curing etc., complete as per S.S for the Pump house |
| 5174 | for Pump house inside & outside |
| 5175 | for Parapet wall |
| 5176 | Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyanceof all materials and labour charges for finishing and curing lifting,scaffolding and other incidental charges etc., complete as per SS (APDSS NO:903) |
| 5177 | Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, and labour charges for mixing of mortar, plastering and curing etc.,of all materials and labour charges for finishing and curing lifting,scaffolding and other incidental charges etc complete as per S.S for ceiling |
| 5178 | Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities. |
| 5179 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etccomplete as directed by the departmental authorities. |
| 5180 | Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201) |
| 5181 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108complete as directed by the departmental authorities. |
| 5182 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30complete as directed by the departmental authorities. |
| 5183 | Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities. |
| 5184 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, ., complete for finished item of work in all floors.( APSS No.126) |
| 5185 | Supply, delivery, lowering and keeping in position of350mm dia PN(1.6) DI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc. complete as directed by the departmental authorities. |
| 5186 | Supply and delivery of 350mm dia. 2.00m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) endsof K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. |
| 5187 | Labour charges for lowering of 350mm dia Pipe and keeping in position of C.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves complete as per S.S and as directed by the departmental authorities. |
| 5188 | Supply and delivery of upto 500mm diacentrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe,and The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. |
| 5189 | Lowering the 350mm dia 2 mts Long, D.I. D/F K9 Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 5190 | Jointing the 350mm diaD.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 |
| 5191 | Supply and delivery ofS.S304 gradeoperating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities. |
| 5192 | Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,complete as per ss and as direceted by the departmental officer incharge of work |
| 5193 | Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab this rate including all materials and other incidental charges complete as per ss and as direceted by the deepartment officer incharge of work |
| 5194 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5195 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5196 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5197 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5198 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges |
| 5199 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. |
| 5200 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., |
| 5201 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5202 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., completed as per IE Rules and as directed by the departmental officer incharge of work |
| 5203 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5204 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5205 | Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5206 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5207 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5208 | Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5209 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5210 | Providing temporory Island for preparation platform for sinking of Intake well |
| 5211 | Providing and construction of Temporary island of 30.00m. Diameter and 8 metres height for preparation of platform etc.with laying of sand bags in the stipulated places with in minimum height of 4.5 mts including cost of empty cement bag, sand thread, stiching charges and labourcharges . During theemergency conditions such as floods .and other natural calamities, the above rate is allowed to enhance by 25% for1st warning level and above, keeping in view of the difficulty in availability of labour and vehicles for ring bundby using crane with grap, consumbles, wooden ballies shutable dia and shutable height andbraceings, forconstruction of 8.00m dia Raw water intake well in River in Godavari near Bridge. This rate including cost of all materials,all labour charges conveyance charges and all operational, incidental and labour charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. |
| 5212 | Formation of bund/approach ramp for Temporary Islandwith Gravel from approved quarry including cost of gravel and conveyance of all materials and labour charges for formation of filling, raming,sectining,including supporting the sides for water flow etc., Complegte for approch ram from bund to intake well at bridge to Godavari river .This rate including cost of all materials,all labour charges conveyance charges and all operational,other incidental and labour charges etc., complete for finished item of work and as per ss and asadirected by the departmental officer in charge of work. |
| 5213 | supply of Wooden ballies 8\" Dia and 9 m long including fixing in the river protection of bund as per the instructions of the departmental officer icharge of the work |
| 5214 | supply of Wooden ballies 2\" Dia for bracing 9.00m long including fixing in the river protection of bund as per the instructions of the departmental officer icharge of the work |
| 5215 | Sand bags for formation of temporary bund (Laying Sand Bags in the stipulated places including cost of empty cement bag, sand, thread,stiching charges and labour chargescomplete as per ss and as direceted by the departmental officer incharge of work |
| 5216 | Construction of ApproachBridgefor Intake well in Godavari River |
| 5217 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH |
| 5218 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places |
| 5219 | Filling with Sand for approach bridge bedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 5220 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per S.S and as directed by the departmental officer incharge of work |
| 5221 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)as follows |
| 5222 | column footings |
| 5223 | For columns |
| 5224 | For Intermediate Braces |
| 5225 | For Carriage Slab Beams |
| 5226 | For Carriage Slab 0.20m thick |
| 5227 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete for finished item of work in all floors.( APSS No.126) |
| 5228 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, 3 tier tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc complete as per S.S and as directed by the departmental officer incharge of work |
| 5229 | Providing 3 Nos of75 KW VT Pumpsets Each with a duty of 90LPS and a total head of 60m (two working and one stand bye) for pumping Raw water from intake well toproposed OHBR at Bobbarlanka |
| 5230 | Supply, delivery and erection of 3# of 67.14 KWelectrically driven vertical foot mounted heavy duty ball bearing type VTRawr water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 90 LPS at total head of 60.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. |
| 5231 | Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5232 | Providing 500 KVA Transformer at intake wellwith Transformer yard |
| 5233 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply |
| 5234 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5235 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5236 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5237 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps |
| 5238 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105 |
| 5239 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures |
| 5240 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097 |
| 5241 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5242 | A) Earth Electrodes |
| 5243 | B) Supply aand fixing of 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 as per IE rules and as directed by the departmental officer incharge of work |
| 5244 | C) Supply aand fixingEpoxy insulators as per IE rules and as directed by the departmental officer incharge of work |
| 5245 | D) Supply and fixingNo.\"8\" SWG Copper wire. MAT 04141 as per IE rules and as directed by the departmental officer incharge of work |
| 5246 | Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : Makes Schinder/Kirlosaakr/Voltamp/Esennar/Toshiba/KPEL/Powertech/SSE/THOTA/Vajra/Sri jeta/Haritha/VVE/Voltek/Star Gazer As per list of recommended brands as category I. MAT-04046e 500KVAcomplete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5247 | 1. Quantity : 1,2. Rated KVA :500 KVA,3. Service & Location: Continuous Outdoor Distribution Transformer,4. Mounting : Plinth.,5. Wound : CopperDouble wound,6. Type :Core type oil immersed,7. Cooling : ONAN,8. TempRise : 40⁰C in oil 45⁰C by resistance,9. Vector Group:Dyn 11,10. Primary Connection :Delta,11. Nominal Voltage / Current : ______,12. Highest system Voltage: 12000V,13. Primary Frequency :50 HZ +/- 3%,14. Number of Phases : 3,15. Primary wires:3,h. Oil filling hole with cap :One, g. Conservator with Drain plug:one,i.Oil level indicator : One, j.Dehydrating Silicagel Breather : One,k. Terminal Arrangement: HV With Treminal Box, l. Terminal Arrangement : LV Cable Box, m. Separate Neutral Bushing: One, n. Filter valve with blanking plate : One, o. Drain cum filter valve with blanking plate : One, p. Air release device : One , q. Thermometer Pocket : One, r. Four :Unidirectional flat rollers, s. One :10Cm dial thermometer(Rigid stem type)16. Secondary connection : Star,17. SecondaryVolts / Current :433V,18. Secondary phases :3,19. Secondary wires:4,20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps),21. Terminal arrangement., a.HV: HT terminal box as per the site condition.,b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable,22. LV:One separate terminal for earthing.,23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats,24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats, f.Explosion vent with Diaphragm :One ,e. Radiators ( Attachable):Adequate25. Percentage Impedance at 75 deg C AT 4.5,26. No load Current Less than 2% of full load Current, 27. Standrad Fittings & Accessories.,a. Rating and terminal marking plate: One,b. Lifting Lugs:Two, c. Off-circuit tap switch :One, d. EarthingTerminals |
| 5248 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5249 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5250 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5251 | a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5252 | b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5253 | c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5254 | d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989 |
| 5255 | e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make:Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5256 | f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5257 | g).3RYB Phase indication lamps with leds complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5258 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5259 | 630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5260 | 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5261 | 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5262 | 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5263 | 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5264 | 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5265 | .KWH digital meter fro lighting section complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5266 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5267 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5268 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5269 | 1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5270 | Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03460 complete as per IE rules and other incidental charges and as directed by the departmental officer incharge of work |
| 5271 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH |
| 5272 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss and as directed by the departmental officer incharge of work. |
| 5273 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as directed by the departmental officer incharge of work. |
| 5274 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete |
| 5275 | column footings |
| 5276 | Columns1.20-0.10-0.10-0.30+1.80 |
| 5277 | Plinth beam2(15+12)=54-gate3.00=51.00 |
| 5278 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials all labour charges,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work. For Pump house |
| 5279 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) |
| 5280 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). complete as per ss and as directed by the departmental officer incharge of work. |
| 5281 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, etc complete as per ss and as directed by the departmental officer incharge of work. |
| 5282 | Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss and as directed by the departmental officer incharge of work. |
| 5283 | supply and filling the transformer yard with 40mm HBG metalincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc.,complete as per ss and as directed by the departmental officer incharge of work. |
| 5284 | Providing 500mm dia. D.I. K9 Raw Water Pumping main from Intake well in Godavari Rivertoproposed OHBR at Bobbarlanka |
| 5285 | Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials,hiring of maachinery ,fuel charges,wages of driversoffor lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches. |
| 5286 | Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. |
| 5287 | Filling with Sand for pipe line trenches This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 5288 | Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, excluding GST and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. For 500mm dia. D.I K9 Pumping main |
| 5289 | Supply and delivery of Centrifugally cast (spun) upto 500mm dia Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities. |
| 5290 | Supply and delivery of Centrifugally cast (spun) upto 500mm dia Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities. |
| 5291 | Supply and delivery of centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating including transportation, ecomplete as per S.S and as directed by the departmental officer incharge of work as follows |
| 5292 | 300mm dia. 2.00m. Long for scours |
| 5293 | 500mm dia. 1.00m. Long for sluice and non return valves and flow meter |
| 5294 | 500mm dia. 2.00m. Long at intake well |
| 5295 | Lowering of 500mm dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 5296 | Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 5297 | Loweringof 500mm dia D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 500nn dia complete as per S.S and as directed by the departmental authorities. |
| 5298 | Lowering of 500mm dia D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 300 mm dia complete as per S.S and as directed by the departmental authorities. |
| 5299 | Jointing the 500mm dia C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.complete as per S.S and as directed by the departmental authorities.as follows |
| 5300 | 500mm dia. |
| 5301 | 300mm dia. |
| 5302 | 150mm dia. |
| 5303 | Manufacture, supply and delivery at work site 500mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge 600 mm dia 10 mm thick plate |
| 5304 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and per IS:1538. PN16 including transportation PN 1.6 as followsas per ss and as directed by the departmental officer incharge of work |
| 5305 | 500mm Ø DI D/F valve - PN16 |
| 5306 | 300mm Ø DI D/F valve - PN16 (for Scour) |
| 5307 | Supply & Delivery of 150mm diaTamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/ PTFE/ EPDM/ NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and ,including transportation. -150mm dia. PN16on 500 mm lineas per ss and as directed by the departmental officer incharge of work |
| 5308 | Supply, Delivery of 500mm diaD.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and complete.PN 1.6 (MPa) 500 mm diaas per ss and as directed by the departmental officer incharge of work |
| 5309 | Manufacture and supply of- 150mm dia Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mm PN 16- 150mm dia. PN16on 500 mm line as per ss and as directed by the departmental officer incharge of work |
| 5310 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves and flow meter |
| 5311 | 500mm dia. |
| 5312 | 300mm dia for scour |
| 5313 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. dia. of Air Valve in mm 150 mm Dia as per ss and as directed by the departmental officer incharge of work |
| 5314 | Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. |
| 5315 | Construction of Anchor blockswith P.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. |
| 5316 | Providing High Yield Strength Deformed (HYSD)/Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works,including labour charges for straightening, cutting,bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG,forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps,couplings,chairs,spacer bars including cost and conveyance of binding wire,cover blocks and all incidental,operational,labour charges such as cutting, bending, placing in position,tying including all materials etc.,complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 5317 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfinished item of work for 500mm dia |
| 5318 | Construction of CC Scour Valve Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) propost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work. For 300mm dia |
| 5319 | Construction ofCC Air Valve chambers suitable to the Air Valve Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) propincluding cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 5320 | Filling with crusher stone DustThis rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 5321 | Restoration of CC Road by Using Concrete mixture Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 5322 | Supply, delivery of 500mm diaElectromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding rings SS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make |
| 5323 | Supply,delivery of 500mm dia strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete(rate as per quatation) |
| 5324 | Manufacture, Supply and delivery of500mm dia MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates areand transportation charges etc., complete - 500 n Dia complete as per ss and as direceted by departmental officer incharge of work |
| 5325 | providingP.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities for encasing . |
| 5326 | Construction of electrician / operator/watchmanquarters at intake well (OHBR) |
| 5327 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places |
| 5328 | Filling with Sand in structuresbedding This rate including cost of Sand,all labour charges,watering,ramming,and other incidental charges etc as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH etc.,complete as per S.S and as directed by the departmental officer incharge of work |
| 5329 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as directed by the departmental officer incharge of work |
| 5330 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix |
| 5331 | column footings |
| 5332 | Columns1.50-0.15-0.15-0.20-0.25 =0.75 + basement 0.75m+superstructure 3.35m=4.85m |
| 5333 | Plinth beam |
| 5334 | Lintle beamsWindows |
| 5335 | Roof Beams |
| 5336 | Roof slab0.125m thick with 0.30m extension all sides |
| 5337 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows |
| 5338 | Loft slab 0.075m thick kitchen |
| 5339 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss and as directed by the departmental officer incharge of work |
| 5340 | Ground floor |
| 5341 | 1st floor |
| 5342 | Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges.As follows. |
| 5343 | Ground floor |
| 5344 | 1st floor |
| 5345 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges.As follows. |
| 5346 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work |
| 5347 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss per ss and as direceted by the departmental officer incharge of work |
| 5348 | Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 5349 | Door -D - 1.20X2.10 m |
| 5350 | doorsD1 -1.0X2.10m |
| 5351 | Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 5352 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work |
| 5353 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work |
| 5354 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, etc., complete for finished item of work in all floors.( APSS No.126) |
| 5355 | Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges.for flooring |
| 5356 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete as per ss and as direceted by the departmental officer incharge of work |
| 5357 | Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss and as direceted by the departmental officer incharge of work |
| 5358 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps complete as per ss and as direceted by the departmental officer incharge of work |
| 5359 | Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages complete as per ss and as direceted by the departmental officer incharge of work |
| 5360 | Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages |
| 5361 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5362 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour chargescomplete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5363 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5364 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5365 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5366 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5367 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete complete as per IE Rules and as direceted by the departmental officer incharge of work |
| 5368 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5369 | Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega |
| 5370 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5371 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5372 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.complete as per IE Rules and as directedby the departmental officer incharge of work |
| 5373 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks complete as per ss and as directedby the departmental officer incharge of work |
| 5374 | Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mmunit each |
| 5375 | Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock unit eachcomplete as per ss and as directedby the departmental officer incharge of work |
| 5376 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. complete as per ss and as directedby the departmental officer incharge of work |
| 5377 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) complete as per ss and as directedby the departmental officer incharge of work |
| 5378 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brandcomplete as per ss and as directedby the departmental officer incharge of work |
| 5379 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicecomplete as per ss and as directedby the departmental officer incharge of work |
| 5380 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kgcomplete as per ss and as directedby the departmental officer incharge of work |
| 5381 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges completecomplete as per ss and as directedby the departmental officer incharge of work asfollows |
| 5382 | 25 mm dia nominal bore -from tank to jn forof individual lines |
| 5383 | 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 5384 | 15 mm dia nominal bore -for internal |
| 5385 | S&F of GI &GM fittings |
| 5386 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 5387 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 5388 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 5389 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 5390 | Supply and fixingGI union Ist Quality complete as per ssa and as directed by the departmentaal officer incharge of work |
| 5391 | 12.70mm |
| 5392 | 19.05mm |
| 5393 | 25.40mm |
| 5394 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth by manual means upto 3.00m depth |
| 5395 | Filling in for for a struture Bedding as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1) complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5396 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 5397 | Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance ,sacfolding,lifting,of all materials and all labour charges ,curing for 21 daysetc complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5398 | Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and labour charges, watering , smooth finishing cost material, scoffoliding other incidental chargesetc.,completeas perss and directed by the departmental authorities of the work as per site conditions.Butexcluding seigniorage Charges |
| 5399 | RCC M-25 Design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A |
| 5400 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 5401 | Construction of OHBR with 33m staging at Bobbarlanka |
| 5402 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHas follows |
| 5403 | Mechanical Means up to 3 metres depth |
| 5404 | Mechancal means 3 to 6 metres depth in ordinary soils |
| 5405 | Manual means 3 to 6 metres depth in ordinary soils |
| 5406 | Filling sandin for structure Bedding as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1) complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5407 | Providing CC(1:4:8) using 40mm HBG metal. The rate including cost and conveyance of all material, labour charges for mixing, laying, curing, etc., complete as per SS. And as direceted by the departmentaal officer incharge of work |
| 5408 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for raft excluding cost of steel. |
| 5409 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for raft excluding cost of steel. |
| 5410 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for raft excluding cost of steel. lifting upto 32mts and above |
| 5411 | 0 - 3 m |
| 5412 | 3 - 4 m |
| 5413 | 4 - 5 m |
| 5414 | 5 - 6 m |
| 5415 | 6-7 m |
| 5416 | 7-8 m |
| 5417 | 8-9 m |
| 5418 | 9-10 m |
| 5419 | 10-11 m |
| 5420 | 11-12 m |
| 5421 | 12-13m |
| 5422 | 13-14m |
| 5423 | 14-15m |
| 5424 | 15-16m |
| 5425 | 16-17m |
| 5426 | 17-18m |
| 5427 | 18-19m |
| 5428 | 19-20m |
| 5429 | 20-21m |
| 5430 | 21-22m |
| 5431 | 22-23m |
| 5432 | 23-24m |
| 5433 | 24-25m |
| 5434 | 25-26m |
| 5435 | 26-27m |
| 5436 | 27-28m |
| 5437 | 28-29m |
| 5438 | 29-30m |
| 5439 | 30-31m |
| 5440 | 31-32m |
| 5441 | 31-32m |
| 5442 | 32m above |
| 5443 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site andincluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete forBottom slab |
| 5444 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for ring beam |
| 5445 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for raft excluding cost of steel. |
| 5446 | staging from 25-26m |
| 5447 | staging from 26-27m |
| 5448 | staging from 27-28m |
| 5449 | staging from 28-29m |
| 5450 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for top ring beam |
| 5451 | Supply and placing M30 Grade of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. with steel scafolding\"complete for top slab |
| 5452 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work |
| 5453 | S&FHYSD/TMT/MS bars (Lap splicing)Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying includingon all materials etc., complete for finished item of work in all floors.( APSS No.126). |
| 5454 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5455 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends forwater, gas, sewage conforming to IS: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation complete as per ss and as direceted by the departmentaal officer incharge of work as follows |
| 5456 | inlet 500 mm DIDF pipes 4.00 m long |
| 5457 | inlet 500 mm DIDF pipes 1.00 m long |
| 5458 | out let 600 mm diaDIDF pipes 4.00m |
| 5459 | out let 600 mm diaDIDF pipes 1.00m |
| 5460 | scour 300 mm dia DIDF pipes 4.00 m long |
| 5461 | scour 300 mm dia DIDF pipes 1.00 m long |
| 5462 | over floe pipes 400 mm dia DIDF 4.00m long |
| 5463 | over floe pipes 400 mm dia DIDF 1.00m long |
| 5464 | Centrifugally cast (spun) upto 500mm dia Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5465 | Centrifugally cast (spun) above 500mm dia Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5466 | Supply and delivery of 500mm dia PN 1.6\"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 300 mm Scoure complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5467 | Labour charges for lowering and keeping in position of 300mm diaDI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. complete as per ss and as direceted by the departmentaal officer incharge of work |
| 5468 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2 as follows |
| 5469 | inlet 500 mm DIDF pipes 4.00 m long |
| 5470 | inlet 500 mm DIDF pipes 1.00 m long |
| 5471 | out let 600 mm diaDIDF pipes 4.00m |
| 5472 | out let 600 mm diaDIDF pipes 1.00m |
| 5473 | scour 300 mm dia DIDF pipes 4.00 m long |
| 5474 | scour 300 mm dia DIDF pipes 1.00 m long |
| 5475 | over floe pipes 400 mm dia DIDF 4.00m long |
| 5476 | over floe pipes 400 mm dia DIDF 1.00m long |
| 5477 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation as follows |
| 5478 | inlet 500 mm deck foot bends |
| 5479 | out let 600 mm deck foot bends |
| 5480 | over flow 400 mm deck foot bends |
| 5481 | scour 300 mm deck foot bends |
| 5482 | inlet 500 mmbends |
| 5483 | out let 600 mmbends |
| 5484 | over flow 400 mmbends |
| 5485 | scour 300 mmbends |
| 5486 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 as follows |
| 5487 | 600 mm dia |
| 5488 | 500 mm dia |
| 5489 | 400 mm dia |
| 5490 | 300mm dia |
| 5491 | Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.as per type design approved by the depaartment |
| 5492 | Installation and commissioning of advanced lightingprotection systems which includes1. Laying of CC Bed2. Installation of Lighting Rod3. Laying of Down conductor4. Installation of Counter5. Installation of GI Mast with stay wire.6. Installation of Earth Electrodes7. Interconnection between the Electrodes8. Termination of down conductor to earth bus etccomplete. |
| 5493 | Supply, Delivery, Installation and Commissioning of Water Level Indicator including all incidental, operational and labourcharges for finsihed item of work and as directed by the Engineer-in-Charge |
| 5494 | Supply, Delivery and instalation of Stainless steel Railing all aroundthe walk ways of bottom and Top slab including the cost of materials, all incidental, operational and labourcharges for finsihed item of work and as directed by the Engineer-in-Charge |
| 5495 | Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. Complete for finished item of work.: Single shutter 3\"- 0\" x 7\"-0\" (914.4x2133.6mm) outer frame section size of 50 x 75 mm |
| 5496 | Supply & Fixing SOLID STEEL DOOR door shutter made out of G I Precoated Sheet with an average wall thickness of 0.35 mm on both sides. MS Tube having dimensions of 19 x 19 mm is inserted along the hinge side of the door, core of the door shutter filled with High Density Polyurethane foam injected with the help of hydraulic injection method, four sides of the door covered with G I Precoated Sheet and the hardware locations reinforced with suitable wooden blocks as per drawing and stickers indicating location of the hardware pasted at appropriate places, etc complete |
| 5497 | Supply, Delivery and instalation of Fly proof ventilators including the cost of materials, all incidental, operational and labourcharges for finsihed item of work and as directed by the Engineer-in-Charge |
| 5498 | Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site complete as per ss and as direceted by the departmental offcier incharge of work |
| 5499 | Laying of 600 dia.DI K7 combined Gravity main from proposed 500 KLOHBR at Bobbarlanka to junction at Vanapalli |
| 5500 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5501 | Cutting and open of C.C. Road surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5502 | Cutting and open of Water bound macadam surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5503 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHas per the ditections of the departmental authorities as follows |
| 5504 | Mechanical Means up to 3 metres depth in ordinary soils |
| 5505 | Manual Means up to 3 metres depth in ordinary sils |
| 5506 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5507 | Centrifugally cast 600 mm dia DIK7(Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5508 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5509 | 350mm dia. Scour lines on 600 mm line for scours 2.00m long DI DF pipes |
| 5510 | for sluice valves,non return valves and flow meters 1.00m long DI DF pipes 600 mm 1.00m lond |
| 5511 | MAnufacture, supply and delivery at work site 600mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001 in suitable lengths painted with two coats of food grade epoxy paint inside and outside to suit the site conditions, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge including Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing 600mm Dia canal crossing including transportation and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5512 | Lowering of 600mm dia DI K9 D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 5513 | Jointing of 600mm dia DI K9 D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 5514 | Supply, Delivery of 600 mm Dia D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steeland including transportation, etc. complete ISI marked.PN 1.6 (MPa) including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5515 | Supply and delivery 350mm DiaPN 16 Sluice Valve of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 duties and transportation.- PN 1.6 MPaincluding transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5516 | Supply & Delivery of Tamper Proof 150mm dia PN 16 DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 andand including transportation. PN 1.6 MPa including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5517 | Supply, Delivery of 600mm dia D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and complete. PN 1.6 MPa including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5518 | Labour charges forlowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.As follows. |
| 5519 | 600mm dia PN 16 Sluice Valve |
| 5520 | Sluice valve of 350mm dia - PN16 on 600 mm dia main |
| 5521 | Labour charges for 150mmdia -PN16 fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5522 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and .includingand other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows. |
| 5523 | 600 mm dia |
| 5524 | 350 mm dia |
| 5525 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.includingand other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows. |
| 5526 | 600 mm dia |
| 5527 | 350 mm dia |
| 5528 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 includingand other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows. |
| 5529 | 600 mm dia |
| 5530 | 450 mm dia |
| 5531 | 400 mm dia |
| 5532 | 350 mm dia |
| 5533 | 150 mm dia |
| 5534 | Construction of R.C.C. thrust blocks using RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, as per ss and as directed by the departemntal officer in charges of work. |
| 5535 | Construction of Anchor blocksVCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,as per ss and as directed by the departemntal officer in charges of work. |
| 5536 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work site including cost and convenyance of all material and all labour charges etc. complete using crusher stone dust as per ss and as directed by the departemntal officer in charges of work. |
| 5537 | Construction of Sluice Valvechambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 5538 | Construction of 600mm dia Scour Valvechambers with VRCC M20 Concrete suitable to the Scour valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work as per ss and as directed by the departemntal officer in charges of work. |
| 5539 | Construction of 150mm dia PN-16 Air Valvechambers with VRCC M20 Concrete suitable to the Air valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 5540 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) For Thrusy Blocks. |
| 5541 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration BT Road etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5542 | Providing concrete for plain/reinforced concrete in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH Nominal mix M20 etc complete as per ss and as directed by the departemntal officer in charges of work. For encasing MS pipes for canal crossing. |
| 5543 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete as per direction of the departmental authorities as per ss and as directed by the departemntal officer in charges of work. |
| 5544 | Manufacture, Supply and Delivery of 600mm diaM.S. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5545 | Providing 450 dia.DI K7 Gravity main fromjunction at Vanapalli to sump at pallamkurru canal |
| 5546 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5547 | Cutting and open of C.C. Road surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches.. |
| 5548 | Cutting and open of Water bound macadam surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5549 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5550 | 450 mm dia. DI K7-fromjunction at Vanapallito clear water sump at WTP Mummidivaram |
| 5551 | For 250mm dia. Scour lines |
| 5552 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss |
| 5553 | Centrifugally castof 450mm dia DI K7 (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5554 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work as follows |
| 5555 | 250mm dia. Scour lines on 400 mm line 2.00m long |
| 5556 | for sluice valves,non return valves and flow meters 1.00m long DI DF pipes 400 mm dia |
| 5557 | Lowering of 450mm dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. |
| 5558 | Jointing of 450mm dia D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.etc., complete as per S.S and as directed by the departmental authorities. |
| 5559 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and transportation.- PN 1.6 MPa including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5560 | Sluice valve of 450mm dia - PN16 |
| 5561 | Sluice valve of 250mm dia - PN16 |
| 5562 | 100 mm dia |
| 5563 | Supply & Delivery of 100mm dia Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and and including transportation. PN 1.6 MPa including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5564 | Supply, Delivery of 450mm diaD.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and complete. PN 1.6 MPa including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5565 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.etc complete as per ss and as directed by the departemntal officer in charges of work. As follows |
| 5566 | 450 mm dia |
| 5567 | Sluice valve of 250mm dia - PN16 |
| 5568 | Labour charges for 10mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5569 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including transportation and and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5570 | 450 mm dia |
| 5571 | 250 mm dia |
| 5572 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, conveyance from source of supply as per BIS No.3114/94.including all abour charges and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5573 | 450 mm dia |
| 5574 | 250 mm dia |
| 5575 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 including all abour charges and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5576 | 450 mm dia |
| 5577 | 250 mm dia |
| 5578 | 100 mm dia |
| 5579 | Construction of R.C.C. thrust blocks using RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. For Thrust Blocks |
| 5580 | Construction of Anchor blocksVCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. For Anchor Blocks |
| 5581 | Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work siteincluding cost and convenyance of all material and all labour charges etc. complete using crusher stone dust as per ss and as directed by the departemntal officer in charges of work. |
| 5582 | Construction of 450mm dia Sluice Valvechambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work as per type design approved by the department authorities |
| 5583 | Construction of 100mm dia PN -16 Scour Valvechambers with VRCC M20 Concrete suitable to the Scour valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work as per type design approved by the department authorities |
| 5584 | Construction of Air Valvechambers with VRCC M20 Concrete suitable to the Air valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work as per type design approved by the department authorities for thrust blocks |
| 5585 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)as per ss and as directed by the departemntal officer in charges of work. For Thrust Blocks |
| 5586 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.includingandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5587 | Shifting of existing Electrical Pole and transformers forlying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete as per IE rulesand as directed by the departemntal officer in charges of work. |
| 5588 | Manufacture, Supply and Delivery of 450mm dia M.S. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates etc complete as per ss and as directed by the departemntal officer in charges of work. Thisrate including cost of all labour charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5589 | Construction of Compound wall at OHBR Bobbralanka |
| 5590 | Constuction of compound wall with the following specifications1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete andother incidental charges as per ss and as directed by the departemntal officer in charges of work. |
| 5591 | Manufacture,supply,delivery of 4.50m Gate MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing, etc complete |
| 5592 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) |
| 5593 | Providing dedicated HT electrical power line to proposedintakewell fromnearest substation |
| 5594 | Cost data per KM of 11 KV HT line with 55 sqmm AAA conductor over 9.10m PSCC poles at 60m span,75 kg/sqm wind pressure working load 140 kgs excluding over heads,other charges,taxes etccomplete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5595 | Construction of New Off take Chamber at Pallamkur canal near Vivekanda varadhi |
| 5596 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5597 | Mechanical Means up to 3 metres depth in ordinary soils |
| 5598 | Mechancial Means 3 to 6 metres depth in ordinary soils |
| 5599 | Manual Means 3 to 6 metres depth in ordinary soils |
| 5600 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss for wing walls & return |
| 5601 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete as per ss and as directed by the departemntal officer in charges of work. |
| 5602 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM30 design mix concrete etc complete as per ss and as directed by the departemntal officer in charges of work. For 150mm thick slab |
| 5603 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM30 design mix concrete etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5604 | Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of workas per S.S out side & inside andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5605 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. for slab , body walls |
| 5606 | Supply and placing of the M20 Nominal mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Flooring in side chamber |
| 5607 | Supply and delivary and fixing of MS Grills of any design including cost and conveyance of all material and all labour charges such as cutting welding ,gringing andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. for grating, ladder. |
| 5608 | Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5609 | ProvidingShutter gate and locking , Screen arrangement as per drawings and rate as per quatations as per ss and as directed by the departemntal officer in charges of work. |
| 5610 | Laying of 400 mm dia DI K7 Raw water gravity main from proposed off take chamber to raw water sump cum pump houseat Pallamkur canal near Vivekanda varadhi |
| 5611 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5612 | Mechanical means up to 3 metres depth in ordinary soil |
| 5613 | Manualmeans up to 3 metres depth in ordinary soil |
| 5614 | Centrifugally cast 400 mm diaDI K7 (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation andandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5615 | Lowering the 400 mm dia DI K7 C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, including conveyance from source of supply as per BIS No.3114/94.andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5616 | Jointing the 400 mm diaDI K7 C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5617 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 , including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5618 | Labour charges for 400 mm dia lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves.andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5619 | Centrifugally cast 400 mm dia 1.00m long DIDF pipes for sluice valves (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5620 | Centrifugally cast 400 mm DI Special (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5621 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, including conveyance from source of supply as per BIS No.3114/94.includingall labour charges and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5622 | Jointing the 400 mm dia C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.includingall labour charges and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5623 | Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5624 | Construction of 400 mm dia Sluice Valvechambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5625 | Construction of 5.00 m dia.(58.82 KL) Raw Water sump cum pump house at proposedOff take Chamber at Pallamkur canal near Vivekanda varadhi |
| 5626 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundationsupto 3.00m depth and other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5627 | Mechanical Means up to 3 metres depth in ordinary soil |
| 5628 | Mechanical means 3 to 6 metres depth in ordinary soils |
| 5629 | Manual Means 3 to 6 metres depth in ordinary soil |
| 5630 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work Raw water sump cum pump house. |
| 5631 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc complete as per ssand as directed by the departmental officer in chrges of work Raw water sump cum pump house. |
| 5632 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)including all labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5633 | Raft slab |
| 5634 | vertical wall 3.00m intial height below GL |
| 5635 | vertical wall 1.00m height over intial height |
| 5636 | vertical wall 3.00m intial height Above GL |
| 5637 | floor slab 0.25 m thick |
| 5638 | beams for placing motors |
| 5639 | Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site andincluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including all labour charges other incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5640 | a) for Pump house Columns |
| 5641 | b) for roof beams- |
| 5642 | c) for roof slab0.15 m thick with 0.30 m extension |
| 5643 | d) for Lintel Beams alround |
| 5644 | g) for Sunshade of 0.60m wide and thickness of .075m at fixed end and 0.05mts.at free end |
| 5645 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5646 | Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5647 | for Super structure of Pump house |
| 5648 | for Pump house Parapet wall |
| 5649 | Supply and fixing of 50mm thick pre-cast Cement Jollys of approved design including cost and conveyance to work spot and all labour charges for fixing in positionandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. for pump house |
| 5650 | Plastering with CM (1:3) 12mm thick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work for ceiling as per ss and as directed by the departemntal officer in charges of work |
| 5651 | Plastering with CM (1:4) 12mm thick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work for the Pump house as per ss and as directed by the departemntal officer in charges of work as per follows |
| 5652 | Ground floor |
| 5653 | First floor |
| 5654 | Plastering with CM (1:3) 20mm thick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of workover floor slab for fixing pumps and motors for Slab as per ss and as directed by the departemntal officer in charges of work for floor slab |
| 5655 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5656 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) as per ss and as directed by the departemntal officer in charges of work |
| 5657 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 as per ss and as directed by the departemntal officer in charges of work |
| 5658 | Supply and fixing Aluminium Anodized Two/ Three Track Sliding Windows as per approved drawing with aluminium anodized sections of Series C Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work as per ss and as directed by the departemntal officer in charges of work |
| 5659 | Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities and other incidental chargesas per ss and as directed by the departemntal officer in charges of work |
| 5660 | Supply and erection of MS Gantry girder as per the approved designs and drawings 3 T capacity etc., complete as per the directions of departmental authorities and other incidental chargesas per ss and as directed by the departemntal officer in charges of work |
| 5661 | Supply and fixing of Stainless steel ladder made out of suitable sections for access from floor slab to Base slab etc., complete as per the directions of departmental authorities and other incidental chargesas per ss and as directed by the departemntal officer in charges of work |
| 5662 | Supply and fixing of 25 mm dia 2.20 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5663 | Supply and fixing of 20 mm dia 2.10 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5664 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building including all labour chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5665 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including, material andall labour charges including all labour chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5666 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour chargesincluding all labour charges including, all material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5667 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.including, all material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5668 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessoriesincluding, all material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5669 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc completeincluding,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5670 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.including,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5671 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) including,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5672 | Supply of stepped type Electronic Regulator ofincluding,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL |
| 5673 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE including,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs..Unit each |
| 5674 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith 23/0060 Twin Core twisted / flat heavy Copper wire etc., complete including,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5675 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with 23/0060 Twin Core twisted / flat heavy Copper wire/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. including,material andall labour chargesother incidental chagesetc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5676 | Providing 350mm,dia.DI K9 Raw Water pumping main from Raw water sump cum pump houseatproposedoff take at Pallamkur canal near Vivekanda varadhi toproposed Aerator of WTP |
| 5677 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundationsupto 3.00m depth For Pipe line trenches.including labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5678 | Mechanical means up to 3 metres depth in ordinary soils |
| 5679 | Manual means up to 3 metres depth in ordinary soils |
| 5680 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5681 | Centrifugally cast 350mm dia DI K9(Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5682 | Lowering the 350 mm dia DI K9 C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, including conveyance from source of supply as per BIS No.3114/94.andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5683 | Jointing the 350mm dia DI K9 C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5684 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5685 | 200mm dia 2.00m long DI DF pipes for scour |
| 5686 | 350mm dia 1.00m long DI DF pipes for sluiceand check valves 2+1+1 |
| 5687 | 250mm dia 1.00m long DI DF pipes at sump cum pump house |
| 5688 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5689 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.including labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5690 | 200 mm dia |
| 5691 | 350 mm dia |
| 5692 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 including labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5693 | 350 mm dia |
| 5694 | 200 mm dia |
| 5695 | 100 mm dia |
| 5696 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and including transportation.PN 1.6 MPa including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5697 | 350mm Ø DI D/F valve - PN16 |
| 5698 | 200mm Ø DI D/F valve - PN16 for scour |
| 5699 | Supply & Delivery of 100 mm dia PN16 Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and and including transportation - PN1.6 MPa including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5700 | Supply, Delivery of 350mm dia D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation andcomplete. PN 1.6 MPa including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5701 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.including labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5702 | 350 mm dia |
| 5703 | 200 mm dia |
| 5704 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve including cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.including labour charges andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work |
| 5705 | Construction of R.C.C. thrust blocks using RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including all labour chargesandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. for thrust blocks |
| 5706 | Construction of Anchor blocksVCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including all labour chargesandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work for anchor block |
| 5707 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting,including sales and other taxes on all materials etc., complete for finished item of work including all labour chargesandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work |
| 5708 | Construction of Sluice Valve chambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workas follows |
| 5709 | 350 mm dia |
| 5710 | 200 mm dia |
| 5711 | Construction of 100mm dia Air Valvechambers with VRCC M20 Concrete suitable to the Air valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 5712 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadamincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5713 | Cutting and open of C.C. Road surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 5714 | Collection ,supply,spreading and compaction of crusher stone dust including cost and conveyance of all material nad all operational, incidental, labour charges, hire charges etc. complete for finished item of work |
| 5715 | BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.as per ss and as directed by the departemntal officer in charges of work. |
| 5716 | Manufacture, Supply and Delivery 350 mm dia of M.S. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5717 | Errection of 3# of 7.46 KW (10 HP)CF Pumpsets each with a duty of 40 LPS and a total head of 13.00m(one working and one stand bye) for pumping Raw water from Rawwatersumpto proposedAeraterof proposed 6.00 MLD WTP for intermediate requirements 2033 |
| 5718 | Errection of 3# of 7.46 KW (10 HP)CF Pumpsets each with a duty of 40 LPS and a total head of 13.00m(one working and one stand bye) for pumping Raw water from Rawwatersumpto proposedAeraterof proposed 6.00 MLD WTP for intermediate requirements 2033 |
| 5719 | Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 40 LPS and a total head of 13m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST. |
| 5720 | Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 5721 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 3 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare -1 NoSuitable Phase indicating lamps reputed make - 3 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 5722 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E RulesSupply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top cover |
| 5723 | Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;Ring Spanner 3/16 to 1\" - 1NoDouble end spanner set 3/16\" to 1\" - 1 NoPipe Wrench 18\" & 4\" - 2NosScrew drivers 6\", 10\" & 12\" - 3 NosCutting Plier 12\" - 1No2 Kgs Hammer with Handle - 1 NoNose Plier - 1 NoFlat and Half round smooth file - 2 NosAdjustable Spanner 6\"Column pipe Clamps - 2 pairsLine Shaft Clamps - 1 PairLine rope and clamps double the weight of pump - 2 setsGland thghtening Spanner - 1 NoSpitter removing Spanner - 1 NoSupply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; completeFire extiguisher 3Kg capacity - 2 NosRubber Mat 6\" x 4\" - 2NosFire Buckets with stand and three buckets - 1 NoRubber Hand Gloves - 1 SetsDanger Board Plates - 4 NosFirst aid kit with chart - 1NoShock Treatment Chart - 1NoPortable rechargeble torch light - 1 No |
| 5724 | Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 5725 | Errection of 100 KVA Transformer at Raw watersump cum pump house off take with Transformer yard 15.00x12.00m |
| 5726 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5727 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5728 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5729 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5730 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5731 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5732 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5733 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5734 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications including all labour chargesandother incidental charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. and as per the details given below: |
| 5735 | A) Earth Electrodes |
| 5736 | B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 |
| 5737 | C) Epoxy insulators |
| 5738 | D) No.\"8\" SWG Copper wire. |
| 5739 | Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.including transportation andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work. Makes : As per list of recommended brands as category I. 100KVA1.Quantity: 1 2.Rated KVA : 100KVA3. Service & Location: Continuous out door Distributin Transformer.4. Mounting : Plinth |
| 5740 | 5. Woumd: Copper oil Double wound.6. type: Core type oil immersed7.cooling : ONAN8.Temp Rise :40ºc in oil 45º C by resistance9. Vector Group : Dyn 1110.PrimaryvConnection: Detla11.Nominal Voltage:/ Current: _________12.Highest system Voltage :12000V13.Primary Frequency : 50HZ +/- 3%14.Number of Phases: 315.Primary wires :316.Secondry Connection: Star17.Secondry Volts/ Current :433V18.Secondry phase : 319.Secondrywires: 420.Taps on primary winding for Primary voltage variation:+5% to -10%in stepsof 2.5% of 7 position (6Steps)21. Terminalarrangementa. HV: HT terminal box as per the site condition.b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable22. LV: One separate terminal for earthing.23. Total Losses at 50% Loading [Watts] [Max] --- as per IS24. Total Losses at 100% Loading [Watts] [Max]--- as per IS25.Percentage Impedance at 75 deg. C at -----as per IS26. No Load current: Less than 2% of full load current.27. Standard Fittings & Accessories.a. Rating and terminal marking plate: Oneb. Lifting Lugs: Twoc. Off-circuit tap switch: One.d. Earthing Terminals : Twoe. Radiators (Attachable): Adequatef. Explosion vent with Diaphragm : Oneg. Conservator with Drain plug: oneh. Oil filling hole with cap :Onei. Oil level indicator: Onej. Dehydrating Silica gel Breather: Onek. Terminal Arrangement: HV With Terminal Boxl. Terminal Arrangement: LV Cable Boxm. Separate Neutral Bushing : Onen. Drain cum filter valve with blanking plate: Oneo. Air release device: Onep. Thermometer Pocket: Oneq. Four: Unidirectional flat rollersr. One :10Cm dial thermometer (Rigid stem type) |
| 5741 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I including transportation andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work. Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt |
| 5742 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) including transportation andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5743 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves including all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work |
| 5744 | a) 630A TPN SDFU for main switchincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of workMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5745 | b) 630A 4pole change over switchincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of workMakes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 5746 | c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital typeincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980 |
| 5747 | d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as requiredincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work Make: L&T /C&S/SALZER/HPL MAT 03989 |
| 5748 | e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A including all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983 |
| 5749 | f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as requiredincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work Make: L&T /C&S/SALZER/HPL |
| 5750 | g).3RYB Phase indication lamps with ledsincluding all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of work |
| 5751 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: including all labour charges andother incidental charges etc complete as per IE Rulesand as directed by the departemntal officer in charges of workMake: Kappa/L&T/Seimens/C&S/Schneider |
| 5752 | 630A TPN SDFU for CW pump house motorsandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5753 | 630A TPN SDFU for compressor/mechanical equipments andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5754 | 630A TPN SDFU for low lift sump Raw water motorsandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5755 | 630A TPN SDFU for Space andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5756 | 630A TPN SDFU for lighting sectionandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5757 | 630A 4pole change over switch for lighting section etc complete as per IE rules and as directed by the departemntal officer in charges of work. Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 5758 | .KWH digital meter fro lighting section etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5759 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3 etc complete as per IE rules and as directed by the departemntal officer in charges of work. Makes: As per list of recommended brands as category I. |
| 5760 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2 etc complete as per IE rules and as directed by the departemntal officer in charges of work. Makes: As per list of recommended brands as category I MAT-02938 |
| 5761 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5762 | 1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5763 | Supply and Laying of 3C X 35Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. etc complete as per IE rules and as directed by the departemntal officer in charges of work.Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456 |
| 5764 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5765 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5766 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5767 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete etc complete as per ssand as directed by the departmental officer in chrges of work as follows |
| 5768 | column footings |
| 5769 | Columns1.20-0.10-0.10-0.30+1.80 |
| 5770 | Plinth beam2(15+12)=54-gate3.00=51.00 |
| 5771 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5772 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ietc., complete for finished item of work in all floors.( APSS No.126) andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5773 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). |
| 5774 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5775 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) |
| 5776 | supply and filling the transformer yard with 40mm HBG metalincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of work as per ss and as directed by the departemntal officer in charges of work. |
| 5777 | Construction of6.00 MLD Rapid Gravity Filtration plant |
| 5778 | Construction of 6 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using sand as filter media, compatible with SCADA arrangements, duly following relevant IS codes in the design of plant components including trial running for 90 days etc., including chlorine contact tank & consumables etc., complete.For components immersed in water Stain less Steel of Grade 304L shall be used. for other components 304 Grade steel shall be used.Lab testing equipment of reputed make and consumables for one year. The testing equipment for conducting all laboratory tests shall be installed & training shall be imparted to the Municipal staff. |
| 5779 | The above rates of Filtration Plants shall include all the following components.CivilWorks(All works of VRCC Shall be in M30 design mix)Stilling Chamber and Aeration cascadePre settling tank shall be provided for 30 MLD and above capacities of WTP for a minimum of 1 hr capacity.Raw water channel with Stainless Steel Weir of SS 304 L Grade material and also with digital flow metersFlash Mixer chamber with Flash mixing arrangements including SS shaft & SS Blades with gear wheel arrangements etc, using 304 L Grade Steel.Clariflocculator / Flocculation tanks with the components of central driven circular clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L tubes /angular for durability & chemical resistant with wheel arrangements etc |
| 5780 | Two numbers of Clariflocculator shall be provided for WTP\"s of more than 30 MLD capacity.Filter house, Chemical house, Alum store, Laboratory room, Chlorination plant room, toilet etc. (All structures shall be provided RCC roof only). Chemical house & Chlorinator rooms are to be isolated and shall be as per CPHEEO manual.Wash water tank of suitable capacity shall be constructed at minimum clearance of 2.00m, above the roof slab of Filter beds / any other structure, and the minimum residual head at the top of under drain system shall not be less than 8.0 meters.Chlorine contact tankAll the Doors and Windows shall be of Best Teak wood/Aluminum / UPVC make, except entrance door. The entrance door including shutter in filter house shall be with best teak wood of minimum size of 2.40 X 2.40 mts.a) Main Doors of all individual Buildings shall be made of Best Teak woodb) Other Internal Doors of the buildings shall be of Compressed wood/ Aluminum/ UPVC materials.c) Ventilators shall be provided for each building/structure of suitable size as per NBC standards. |
| 5781 | a) All pipes in Plant shall be of D.I., D/F materials. All Connecting pipes of the plant components such as from Flash mixer to Clariflocculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I., D/F material. The size of sludge disposal pipe shall be minimum of 450 mm dia. with D.I D/F pipe and minimum length of 100 meters. b) All the Valves in Plant shall be heavy duty and as per the specification of SoR item No.28.The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be sufficiently spaced for easy operation & maintenance and inspection, as per standard norms.The bottom level of the wash water control chamber must be above G.L so as to dispose the wash water and sludge from Clariflocculator by gravity to disposal pointAdditional specificationsRailing for all the components (Clariflocculator, Filter House, Staircase etc,.) shall be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia. pipe for top horizotals,25mm dia. for middle row and 40mm dia. verticals spaced at interval of not more than 1.00m c/c. |
| 5782 | Inspection / Path ways in filter beds: Middle pathway: Minimum of 1.50m, Side pathway: Minimum of 1.20mFlooring in the buildings (Filter house, Chemical House, Chlorinator Room, Laboratory) shall be provided with Non-skid ceramic tiles of approved make & quality, as per standard specifications. ii) All water Channels such as inlet, outlet channels and chambers shall be provided with tiles.The basement of the Filtration plant building shall be minimum of 1.20m and pipe gallery shall be minimum 0.3m above the existing nearby Road top level.17) Minimum head room of 2.00m shall be provided, at the alum mixing chambers in alum store for inspection & maintenance.The minimum width of entrance hall for the Filter House shall be 4.50m, and Laboratory of min size of 3.30 X 4.50m. |
| 5783 | b) For various components of the WTP should be designed by considering the uplift pressure also. a) High efficient Air Blowers shall be installed to the design requirement with low noise pollution, environmental pollution as per PCB guide lines & Testing of blowers as per I.S Standards at site. b) The Piping from Blower to Filter Beds shall be GI and submerged pipe in water shall be HDPE. UPVC pipes shall be provided for under drain system. Filter pipe manifolds shall be assembled with HDPE pipes. 21) Alum storage capacity shall be designed for minimum period of 90 days. Consumables shall be provided for 2115 Running Hours of WTP.Chlorinator : Vacuum type chlorinator shall be provided with following specifications: a) Vacuum operated solution feeding type Vacuum Regulator, Rotameter, Rate setting Valve, built-in NRV, Gas Overflow out let by man folding to mount the system with the unit. b) The unit shall consist of Ejector with necessary accessories such as Check Valve, Drain Valve and Vacuum relief Valves - for control of chlorinator dosage. c) The Accessories and manifolds shall be chlorine resistant and made of carbon steel seam less pipes, copper tube with brass fittings of suitable size & dimensions, with diaphragm sealed chlorine pressure gauge arrangements |
| 5784 | d) Water Booster Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with Head ranging from 16 to 35 m e) The water & solution carrying pipes shall be made of UPVC material of suitable size incl. all specials such as Tee\"s , Bends, couplings & NRVs and also Pressure Gauges of suitable range. f) Chlorine Gas Leak detector with alarm indicator. The installation includes all necessary accessories, civil and mechanical works, manifold header installations, injector fixing, connection with UPVC pipes, solution piping’s, fixing of motors as per standard specifications and commissioning of Chlorination Plant to the required demand, with a defect liability period of 1 year. The chlorinator of may be of any reputed make or any make of Metito/Toshocow-Jesco Siemens Industrial Devices. g) Life breathing apparatus. h) Chlorine escape BA set2 to 10 MLD Plants - 1Kg/hr Chlorinator- For Post Chlorinationii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator - For Post Chlorination.iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator - For Post Chlorination. |
| 5785 | B) Mechanical Equipment 1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical resistance. (Alum tanks must be bound with corrosion resistant material (HDPE Lining, Bitumen Coating, tiles etc)2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical resistance.3) Filtration plant equipment instrumentation and piping. 4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge arrangement etc., 5) Pneumatic tyre wheel shall be provided for the bridge Clariflocculator. 6) Wash water tank fittings and pump sets with 100% stand by. 7) Air blower with motor of 100% stand by and pipe connections made with of SS pipes confirming to SS 304 Grade, in filter bed region. 8) Chlorination equipment and pipe connections with chlorinator of 100% standby. 9) Spares & Tools for 2 years. 10) Gaseous Chlorination with cylinders has to be provided with protection measures. C) Electrical Equipment1) Necessary power supply wiring to motors and switches bus bar connections as per IE Rules 2) Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc. 3) Erecting mechanical and electrical equipment, trial run for 90 days at 23.50 hours per day testing the treated water as per CPHEEO standards and maintenance of records and imparting training to staff.4) Supply of 6 - Sets of completion plans and maintenance manual and brochures. 5) All cables shall be of copper material, Cable ducts shall be covered with MS / Aluminum cheque plate.6) Min LUX levels inside the treatment plant shall be maintained. 7) Yard lighting shall be provided as per norms. D ) Equipment for Flow measurements |
| 5786 | 1) Equipment for measuring Conductivity, Turbidity, Ph value, Residual Chlorine with recording & data storage facility (Computer based) & Alarm by SMS or other methods.2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water & Clear water flows by installing Digital Flow meters to measure the flows at Raw water Channel and at each filter bed individually and combined for measuring the quantities of water treated with a facility to record and store the readings & also to send messages to the assigned designators about the variations/ deficiencies in the flow including alerts for back wash requirements of filter beds, and recovery of data for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make. The equipment shall have the following specifications. Hardware: i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter bed out lets with accessories consists of ii) Electrode Type: General type, Scraper type or replaceable type Electrode made with material of SS external Ultra Touch Sensors as per requirement. |
| 5787 | iii) Customized Application Requirement : Sensors with Interface logic control board with serial interfaces, including accessories such as Add-on port, external DC Power Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication Button and memory of Data Storage for 30Days , status of Filter Bed Level indicator, Rating, Reading on LCB Display, Menu Driven Data for sending to Onsite Big Display, operated with Battery Power of any reputed make or any equivalent make.iv) Customized Application Requirement: Power Sensors Interface logic control board with support 8 Power Sensing tags, Central System Interfacing Communication, On - board analog to Digit Convert Integrate Circuit of any reputed make or any equivalent make.Customized Application Requirement: Centralized System with two serial interfaces, 3 No’s of Add-On ports, One external DC Power Socket, On - Board Buffer, On - Board Timer, On - Board RS485 Communication, On - Board RS 232 Communication, On - Board GPRS/GSM Module, On - Board Voice Chip, On - Board Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display on LCD Display, Menu Driven, Menu Navigate Keypad, sending data to the Web Server, Communication with GPRS , operated with Battery Power of any reputed make or any equivalent make. |
| 5788 | Software: The software shall be designed with Web Domain with Data Base Server and Web Name as per the directions of the Departmental Authorities. The application of Software for Web design & Desktop shall meet the following requirements: i)Onsite Display: Letters with size of 1.5’ seven Segment LED Display with Interface for each Filter Bed, for Onsite Display, by displaying the Bed Levels, Ratings, Readings in 3 Columns, for each bed of the plant in successive rows and cumulative results at the bottom of the screen. ii) Off Site Display: Letters with size of 1.5’ seven Segment LED Display with Interface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total Cumulative Reading as specified on On-site Display Features.The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level Triggering, before & after Bed wash. |
| 5789 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.as follows |
| 5790 | 300 mm dia DI DF pipes from WTP to clear water sump |
| 5791 | 300mm from WTP to sump horizantal |
| 5792 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) includingetc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5793 | Supply and delivery of 300 mm dia \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. .PN 1.6 MPa |
| 5794 | Labour charges for 300 mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5795 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5796 | Jointing the 300 mm dia C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5797 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trench etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5798 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5799 | Construction of Sluice Valvechambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of worketc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5800 | Construction 10.00m dia m dia (188.64 KL) clear watersump atWTP |
| 5801 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthetc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5802 | Mechanical Means up to 3 metres depth in ordinary soils |
| 5803 | Mechanical Means 3 to 6 metres depth in ordinary soils |
| 5804 | Manual Means 3 to 6 metres depth in ordinary soils |
| 5805 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5806 | Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundationsetc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5807 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixeretc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5808 | Raft |
| 5809 | For side walls circular 0.30m thick below GL |
| 5810 | For side walls circular 0.30m thick above GL |
| 5811 | Columns 0.30 x 0.30m 3.60-0.30 |
| 5812 | Roof beams |
| 5813 | Roof slab0.15m thick 0.786x(10.60^2-4.00^2) |
| 5814 | Roof dome slab 0.15m thick |
| 5815 | Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5816 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5817 | Supply and delivery and fixing in position M S grill of any design including etc complete and all labour , fixing charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5818 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.( APSS No.126) etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5819 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD. etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5820 | Construction of 10.50x7.50m pump house for clear water pumps and motors at proposed WTP |
| 5821 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5822 | Mechanical means up to 3 metres depth in ordinary soil |
| 5823 | Manual Meansup to 3 metres depth in ordinary soil |
| 5824 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5825 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5826 | Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5827 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5828 | Column footings |
| 5829 | Pedestals |
| 5830 | Columns |
| 5831 | Plinth beam3.50-0.30 |
| 5832 | Lintel beams |
| 5833 | Roof Beams |
| 5834 | Roof slab0.125m thick, |
| 5835 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5836 | Brick work in CM 1:6 mix using 2nd class bricks Cost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.as follows |
| 5837 | Ground floor |
| 5838 | 1st floor Parapet wall2(11.70+8.63)=40.66 |
| 5839 | Cement plasteringusing opc in cm(1:5) prop 12 mmCost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work out side & inside etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5840 | Ground floor |
| 5841 | 1st floor Parapet wall |
| 5842 | Cement plasteringusing opc in cm(1:3) prop 12 mmCost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work as per SS for ceilingetc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.as follows |
| 5843 | Cement plasteringusing opc in cm(1:3) prop 20 mmthickincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of workandother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5844 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5845 | Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5846 | Supply and fixing Aluminium Anodized Two/ Three Track Sliding Windows as per approved drawing with aluminium anodized sections of Series C Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work |
| 5847 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5848 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,etc complete etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5849 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5850 | Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss and as directed by the departemntal officer in charges of work. |
| 5851 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5852 | Supply and fixing of 25 mm dia 2.20 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5853 | Supply and fixing of 20 mm dia 2.10 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages etc complete ,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5854 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5855 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges etc complete as per IE rules and as directed by the departemntal officer in charges of work.for hall |
| 5856 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges including all labour charges etc complete as per IE rules and as directed by the departemntal officer in charges of work.for hall |
| 5857 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.including all labour charges etc complete as per IE rules and as directed by the departemntal officer in charges of work. |
| 5858 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,including all labour charges etc complete as per IE rules and as directed by the departemntal officer in charges of work.for hall |
| 5859 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete |
| 5860 | S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going |
| 5861 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) |
| 5862 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL |
| 5863 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs..Unit each |
| 5864 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith 23 / 0060 twin core twisted / flat heavy Copper wire etc., complete |
| 5865 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with 23 / 0060 twin core twisted / flat heavy Copper wire/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 5866 | Supply ,Erection and Commissioning of Crane Gantry Girder of Capacity of 3.00 T including cost and conveyance of all material and all labour charges etc complete as per ISI and as directed by the dept . Including all taxes & Labour cess |
| 5867 | Errection of3# of 26.11 Kw (35HP)CF Pumpsets each with a duty of 38 LPS and a total head of 48m (one working and one stand bye) for pumping clear water from cklearwatersump to proposedELSRs for intermediate requirements 2033 |
| 5868 | Errection of3# of 26.11 Kw (35HP)CF Pumpsets each with a duty of 38 LPS and a total head of 48m (one working and one stand bye) for pumping clear water from cklearwatersump to proposedELSRs for intermediate requirements 2033 |
| 5869 | Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 38 LPS and a total head of 48m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply, delivery, errection and commissioning of Motors with a speed of 1500 RPM 50 Hz TEFC horizontal foot mounted squirrel cage induction motor of reputed standard make suitable to operate 440volts to suit above pump sets fitted on a common base plate including cost and conveyance of all materials including errection and commissioning charges and dismantling the existing motors carefully if any and all taxes , duties, labour and transportation charges to site and all other incidental and operational chrages etc; complete including all taxes but excluding GST. |
| 5870 | Supply, delivery and errection of suitable capacity vaccum pumpsets with all necessary Electrical connections,GI pipe connections & other accessories for self priming with 100 % Stand bye including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.Supply and fixing of control Pannel Board with suitable capacity bus bar suitable to operate above 3 Nos Pump Sets. The accessories all are internally wired with necessary earthing terminations. The Panel Board is made of 16 guage MS sheet metal cubical/industrial indoor type and duty painted with 2 coats enamel paint with cost of material as follows. conveyance, all taxes, duties, labour charges and all other incidents etc; complete for finished item of work |
| 5871 | Soft Starter i.e; FCMA ( flux compensated magnetic amplifier) standard reputed make - 3 Nos)Suitable capacity MCCB for incoming supplystandard reputed make - 1 NoSuitable capacity TPN switch fuse unit HRC type to control starters standard reputed make- 3 NosSuitable KVAR Capacitors bank with controlling MCB switch for improving power factor standard reputed make - 1NoSuitable Volt Meter with selectro swithch with CT coils to read all phases standard reputed make - 1 NoSuitable Amps Ammeter with selectro switch to read total load standard reputed make- 3 noSuitable Amps Ammeter for individual reading of motor load standard reputed make- 3 NosSuitable Amps TPN switch fuse unit with HRC fuse for spare -1 NoSuitable Phase indicating lamps reputed make - 3 NosSuitable ON/OFF green and red push buttons with indicating bulbs of any reputed make - 6 NosSupply, delivery and errection and jointing of suitable cable connectionIncoming cable of suitable size of alluminium armoured cable 3.50 core of standard make from transformer to Panel Board |
| 5872 | Out-going cable of suitable size of Alluminium armoured cable of 3.50core of standard make from Panel Board to Starter and to MotorCable Joints with jointing materials such as lugs glands, adhesive taps etc; to join the above cables a per I.E RulesSupply and errection of suitable suction and delivery DI/MS pipes and connections upto manfold including heavy duty Sluice Valves on suction side per stipulations of water supply mannual and I.S.CodesSupply,delivery,errection and commissioning of suitable capacity vaccum pump to operate ablve pumpsets including connecting or pumpsets with required G.I Pipes, Specials and fixing in concrete bed etc;Supply, laying and fixing of 40x6mm G.I flat patti double earthing for electrical protection for motor, pump and panel board efficiently earthing duly providing earth pits and filling with coal and salt and G.I pipe 1 1/2 x 6\" long and bottom 2\"x2\" G.I.Plate welded as per I.E.Rules and Specifications with cost of materialss, conveyance, taxes,duties, labour charges and all other incidental charges and providing 1 1/2\" x 1 1/2\" earth pit chamber with brick masonary with top coverSupply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc; |
| 5873 | Ring Spanner 3/16 to 1\" - 1NoDouble end spanner set 3/16\" to 1\" - 1 NoPipe Wrench 18\" & 4\" - 2NosScrew drivers 6\", 10\" & 12\" - 3 NosCutting Plier 12\" - 1No2 Kgs Hammer with Handle - 1 NoNose Plier - 1 NoFlat and Half round smooth file - 2 NosAdjustable Spanner 6\"Column pipe Clamps - 2 pairsLine Shaft Clamps - 1 PairLine rope and clamps double the weight of pump - 2 setsGland thghtening Spanner - 1 NoSpitter removing Spanner - 1 NoSupply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; completeFire extiguisher 3Kg capacity - 2 NosRubber Mat 6\" x 4\" - 2NosFire Buckets with stand and three buckets - 1 NoRubber Hand Gloves - 1 SetsDanger Board Plates - 4 NosFirst aid kit with chart - 1NoShock Treatment Chart - 1NoPortable rechargeble torch light - 1 No |
| 5874 | Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;Supply, delivery and erection of 5 tonnes capacity double girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of best quality 250 x 100 mm of standard make, including the required MS ISMC, MS angular iron, 5 tonne capacity travelling trolley and5 tonne capacity chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field EngineerTesting and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection |
| 5875 | Construction of electrician / operator/watchmanquarters at HWW |
| 5876 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD. |
| 5877 | Mechanical means up to 3 metres depth in ordinary soil |
| 5878 | Manual Meansup to 3 metres depth in ordinary soil |
| 5879 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 5880 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5881 | Supply and placing of the M25 design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcetc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 5882 | column footings |
| 5883 | Columns1.50-0.15-0.15-0.20-0.25 =0.75 + basement 0.75m+superstructure 3.35m=4.85m |
| 5884 | Plinth beam |
| 5885 | Lintle beamsWindows |
| 5886 | Roof Beams |
| 5887 | Roof slab0.125m thick with 0.30m extension all sides |
| 5888 | Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows |
| 5889 | Loft slab 0.075m thick kitchen |
| 5890 | Brick work in CM 1:6 mix using 2nd class bricks Cost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of worketc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5891 | Ground floor |
| 5892 | 1st floor |
| 5893 | Cement plasteringusing opc in cm(1:5) prop 12 mmCost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work out side & inside etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5894 | Ground floor |
| 5895 | 1st floor |
| 5896 | Cement plasteringusing opc in cm(1:3) prop 12 mmCost including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work for walls out side & inside etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5897 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5898 | Supply delivary and fixing RCC Jollys including all labou cgRGES etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5899 | Supply and fixing Aluminium Anodized Doors - Single Shutter as per approved drawing with aluminium anodized sections of Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 of specified thickness Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm of specified thickness and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, floor springs/ hydraulic door closure assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work.AS FOLLOWS |
| 5900 | Door -D - 1.20X2.10 m |
| 5901 | doorsD1 -1.0X2.10m |
| 5902 | Supply and fixing Aluminium Anodized Two/ Three Track Sliding Windows as per approved drawing with aluminium anodized sections of Series C Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5903 | Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet,mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in- Charge for finished item of work |
| 5904 | Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC „C‟ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm widecross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the „C‟ Channel using PVC solvent adhesive.Complete as per direction of Engineer-in-charge, manufacturer‟s specification & drawing for finished item of work . |
| 5905 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5906 | Cement plasteringusing opc in cm(1:3) prop 20 mm thick including cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of workfor floorring |
| 5907 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,etc complete etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 5908 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) |
| 5909 | Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps |
| 5910 | Supply and fixing of 25 mm dia 2.20 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages |
| 5911 | Supply and fixing of 20 mm dia 2.10 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages |
| 5912 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building |
| 5913 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges |
| 5914 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges |
| 5915 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. |
| 5916 | supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., |
| 5917 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete |
| 5918 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete |
| 5919 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) |
| 5920 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL |
| 5921 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs..Unit each |
| 5922 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith 23 / 0060 twin core twisted / flat heavy Copper wire etc., complete |
| 5923 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with 23 / 0060 twin core twisted / flat heavy Copper wire / TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 5924 | Sanitary and water supply |
| 5925 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks |
| 5926 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work |
| 5927 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm brass plumber union, 31.75mm dia PVC flexible waste pipe of 914.4mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 5928 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 5929 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 5930 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 5931 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 5932 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg |
| 5933 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete |
| 5934 | 25 mm dia nominal bore -from tank to jn forof individual lines |
| 5935 | 20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen |
| 5936 | 15 mm dia nominal bore -for internal |
| 5937 | S&F of GI &GM fittings |
| 5938 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 5939 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 5940 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 5941 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 5942 | S& F GI union Ist Quality |
| 5943 | 12.70mm |
| 5944 | 19.05mm |
| 5945 | 25.40mm |
| 5946 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD.Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth by manual means upto 3.00m depth |
| 5947 | Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 5948 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 5949 | Brick work in CM 1:5 mix using 2nd class bricksincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of work |
| 5950 | Cement plasteringusing opc in cm(1:3) prop 20 mmthickincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges for mixing mortar, laying, rendering smooth , curing,etc,, complete for finished item of workas per SS out side & inside |
| 5951 | RCC M-25 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A |
| 5952 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) |
| 5953 | Errection of 250 KVA Transformer at at Head Water Works Mummidivaram with Transformer yard 15.00x12.00m |
| 5954 | Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply |
| 5955 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113 |
| 5956 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111 |
| 5957 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110 |
| 5958 | Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps |
| 5959 | Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105 |
| 5960 | Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures |
| 5961 | Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097 |
| 5962 | Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below: |
| 5963 | A) Earth Electrodes |
| 5964 | B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146 |
| 5965 | C) Epoxy insulators |
| 5966 | D) No.\"8\" SWG Copper wire. MAT 04141 |
| 5967 | Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04044c 250KVA |
| 5968 | Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431 |
| 5969 | Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976 |
| 5970 | Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978 |
| 5971 | a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5972 | b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 5973 | c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980 |
| 5974 | d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989 |
| 5975 | e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983 |
| 5976 | f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990 |
| 5977 | g).3RYB Phase indication lamps with leds |
| 5978 | h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986 |
| 5979 | 630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5980 | 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5981 | 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5982 | 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5983 | 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885 |
| 5984 | 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898 |
| 5985 | .KWH digital meter fro lighting section |
| 5986 | Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879 |
| 5987 | Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938 |
| 5988 | Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998 |
| 5989 | 1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. |
| 5990 | Supply and Laying of 3C X50Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b |
| 5991 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means |
| 5992 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss |
| 5993 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 5994 | Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete |
| 5995 | column footings |
| 5996 | Columns1.20-0.10-0.10-0.30+1.80 |
| 5997 | Plinth beam2(15+12)=54-gate3.00=51.00 |
| 5998 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 5999 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.( APSS No.126) |
| 6000 | Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). |
| 6001 | Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, t etc complete |
| 6002 | Painting two coats with synthetic enamel paint on new iron work over a base coat of red-oxide making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.(APDSS No:1201) |
| 6003 | supply and filling the transformer yard with 40mm HBG metalincluding cost of all materials,conveyance charges of materials andall operational, incidental and labour charges etc., complete for finished item of work |
| 6004 | Providing site filling to Head water works |
| 6005 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. with Gravel |
| 6006 | Providing service road to Head water works |
| 6007 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using Gravel |
| 6008 | Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller 80-100 kN / Vibratory Roller to achieve thedesired density, complete as per Technical Specification Clause 401 MORD / MORTH For Grading II Material (CBR Value minimum 25) |
| 6009 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. |
| 6010 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. |
| 6011 | Construction of 600 mm sizeCC disposal drain from proposed WTP |
| 6012 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH |
| 6013 | Mechanical means up to 3 meters depth |
| 6014 | Manual means up to 3 meters depth |
| 6015 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1) |
| 6016 | Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete |
| 6017 | PCC M-10 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site andincluding all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for CC drains RBR-SBST-5 A |
| 6018 | 600X600 mm CC drain bottom layer |
| 6019 | walls (0.20+0.30)/2=0.25 |
| 6020 | Construction of 600 KLELSR with 18m stagingat Ayyavari cheruvu( siyalayam)zone -I |
| 6021 | Construction of ELSR With the following specification600 kl capacitywith a staging of 18 m, withSeismic analysis. |
| 6022 | All concrete components shall be designed with M30 Design Mix proportion.4) The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.c) For SBC below 10T/Sqm , solid raft shall be providedd) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.11) The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL.14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost. |
| 6023 | 15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia.b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia. |
| 6024 | Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 Noviii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c. |
| 6025 | xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No.xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work. |
| 6026 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted.xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases. |
| 6027 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 6028 | Construction of 500 KLELSR with 18m staging at Krapu Chintalapudi zone -II A |
| 6029 | Construction of ELSR With the following specification500 kl capacitywith a staging of 18 m, with Seismic analysis. |
| 6030 | All concrete components shall be designed with M30 Design Mix proportion.4) The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.c) For SBC below 10T/Sqm , solid raft shall be providedd) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.11) The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL.14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost. |
| 6031 | 15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia.b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia. |
| 6032 | Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 Noviii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c. |
| 6033 | xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No.xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work. |
| 6034 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted.xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases. |
| 6035 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 6036 | Construction of 500 KLELSR with 20m stagingat Near M.M.P School zone -III(Balance Work) |
| 6037 | Construction of ELSR With the following specification500 kl capacitywith a staging of 20m, with Seismic analysis. |
| 6038 | All concrete components shall be designed with M30 Design Mix proportion.4) The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.c) For SBC below 10T/Sqm , solid raft shall be providedd) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.11) The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL.14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost. |
| 6039 | 15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia.b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia. |
| 6040 | Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 Noviii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c. |
| 6041 | xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No.xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work. |
| 6042 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted.xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases. |
| 6043 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 6044 | Construction of 500 KLELSR with 20m stagingat Bondaikodu(Balance work) |
| 6045 | Construction of ELSR With the following specification500 kl capacitywith a staging of 20 m, with Seismic analysis. |
| 6046 | All concrete components shall be designed with M30 Design Mix proportion.4) The foundations shall be designed for Annular Raft Footings.The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for SBC of 15 T/Sqm.c) For SBC below 10T/Sqm , solid raft shall be providedd) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which additional payment shall be made as per field condition. a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof.b)The rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per departmental designs and drawings.11) The above rates adopted for a wind pressure up to \"250 kg/Sqm\".The ELSR/OHSR shall be designed with minimum of two rows of columns for capacities above 500 KL & up to 1000KL.The ELSR/OHSR shall be designed with minimum of three rows of columns for capacities above 1000KL.14. The shaft type staging with slip form can also be provided with proper approval from competent authority without any additional cost. |
| 6047 | 15) The basic rate is inclusive of following Fixturesi) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material.II) The sizes of the verticals for ELSR/OHSR shall be:a) For 500 KL to 750 Kl ELSRsInlet Pipe - 300mm dia.Out let Pipe - 350mm dia.DI valves – 2 No’sOver Flow pipe - 350m dia.Scour Pipe - 200mm dia.b) For 800 KL to 1500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 450mm dia.DI valves – 2 No’sOver Flow pipe - 450m dia.Scour Pipe - 200mm dia.c) For above 1500 KL to 2500 Kl ELSRsInlet Pipe - 400mm dia.Out let Pipe - 500mm dia.DI valves – 2 No’sOver Flow pipe - 500m dia.Scour Pipe - 200mm dia. |
| 6048 | Note: Any deviation from the above sizes as per design, shall be paid or recovered.(iii) Manhole Frames & Coversa) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers.iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4Nos.v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.vi) RCC precast ladders of 0.60 m width - 2 Nos.vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 Noviii) The staircase shall be enclosed with brick masonry walls on three sides and collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an interval not more than of 1.00m c/c. |
| 6049 | xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No)xii) Lightening Arrestor with all its accessories complete including earthing, with relevant IS Codes - 1 No.xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate pillars. All the materials shall be followed as per the standards.Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X 25mm X 4mm in \"Y\" shape to height of 0.60m, with embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall be stretchedin 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both sides of brick work. |
| 6050 | Snowcem paint in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/ decreasedNote:-For every 1m increase/decrease in length of compound wall the increase/decrease inbasic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:i)500 KL : 0.086%ii)1000 KL : 0.047%iii)1500 KL : 0.034%iv)2000 KL : 0.026%v)2500 KL : 0.022 %For intermediate capacities, interpolated percentages shall be adopted.xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the following specification: RCC framed structure with concrete grade not less than M20 design mix at the locations specified by the department at the time of execution withveranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding balconies and staircases. |
| 6051 | MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors shall be provided. N.C.L. Windows centre fixed both sides open able shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be provided with snowcem paint in two coats over primary coat. Electrical and water supply arrangement shall be provided as directed by dept officer. Water Storage tank made with plastic/polymer material of reputed make with necessary out let and inlet connection pipes shall provided. Septic tank for 5 users shall be provided. |
| 6052 | Laying of 350mm,300 mm , 250mm,200 mm150 mm and 100 mm dia . DI K9 Pumpingmains for clear waterfrom clear water sump at proposed 6.50 MLD WTPto variousproposed and existingELSRs |
| 6053 | Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 6054 | Cutting and open of C.C. Road surfaceincluding all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 6055 | Cutting and open of WBM. Road surface including all labour charges for cutting, stacking of materials hiring of machinary, fuil charges, wages of driver etc.,complete as per the directions of departmental authorities. For pipe line trenches. |
| 6056 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH |
| 6057 | Mechanical Means up to 3 metres depth in ordinary soil |
| 6058 | Manual means up to 3 metres depth in ordinary soil |
| 6059 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 6060 | Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 6061 | 300mm dia DIK9 |
| 6062 | 250mm dia DIK9 |
| 6063 | 200mm dia DIK9 |
| 6064 | 150mm dia DIK9 |
| 6065 | 100mm dia DIK9 |
| 6066 | Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation and etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 6067 | 200 mm dia 2.00m long DIDF pipes for scours on 300 mm dia pipe |
| 6068 | 150 mm dia 2.00m long DIDF pipes for scours on 250 mm dia pipe |
| 6069 | 150 mm dia 2.00m long DIDF pipes for scours on 200 mm dia pipe |
| 6070 | 100 mm dia 2.00m long DIDF pipes for scours on 150 mm dia pipe |
| 6071 | 300 mm dia 1.00m long DI DF pipes for sluice and non return valves and bulk flow meters 3+1+1 |
| 6072 | 250 mm dia 1.00m long DI DF pipes for sluice and non return valves 2+1 |
| 6073 | 200 mm dia 1.00m long DI DF pipes for sluice and non return valves 6+4 |
| 6074 | 150 mm dia 1.00m long DI DF pipes for sluice and non return valves 7+4 |
| 6075 | 100 mm dia 1.00m long DI DF pipes for sluice and non return valves 2+2 |
| 6076 | Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 6077 | Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.as follow |
| 6078 | 300mm dia DIK9 |
| 6079 | 250mm dia DIK9 |
| 6080 | 200mm dia DIK9 |
| 6081 | 150mm dia DIK9 |
| 6082 | 100mm dia DIK9 |
| 6083 | Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. |
| 6084 | 300mm dia DIK9 |
| 6085 | 250mm dia DIK9 |
| 6086 | 200mm dia DIK9 |
| 6087 | 150mm dia DIK9 |
| 6088 | 100mm dia DIK9 |
| 6089 | Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 , duties and including transportation.PN 1.6 MPa etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 6090 | 300 mm dia sluice valves |
| 6091 | 250 mm dia sluice valves |
| 6092 | 200 mm dia sluice valves |
| 6093 | 150 mm dia sluice valves |
| 6094 | 100 mm dia sluice valves |
| 6095 | Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and including transportation - PN1.6 MPa |
| 6096 | 80mm dia. PN 16 on 300 mm dia |
| 6097 | 80mm dia. PN 16 on 250 mm dia |
| 6098 | 80mm dia. PN 16 on 200 mm dia |
| 6099 | 80mm dia. PN 16 on 150 mm dia |
| 6100 | Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and excluding all taxes complete. PN 1.6 MPa |
| 6101 | 300 mm dia |
| 6102 | 250mm dia DI |
| 6103 | 200mm dia DI |
| 6104 | 150mm dia DI |
| 6105 | 100mm dia DI |
| 6106 | Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. as follows |
| 6107 | 300 mm dia sluice valves |
| 6108 | 250 mm dia sluice valves |
| 6109 | 200 mm dia sluice valves |
| 6110 | 150 mm dia sluice valves |
| 6111 | 100 mm dia sluice valves |
| 6112 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc. |
| 6113 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 6114 | 300mm dia |
| 6115 | 250 mm dia |
| 6116 | 200 mm dia DI |
| 6117 | 150mm dia |
| 6118 | 100 mm dia |
| 6119 | Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 |
| 6120 | 300 mm dia |
| 6121 | 250 mm dia |
| 6122 | 200 mm |
| 6123 | 150 mm dia |
| 6124 | 100 mm dia |
| 6125 | 80 mm dia air valves |
| 6126 | Construction of R.C.C. thrust blocks using RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work |
| 6127 | Construction of Anchor blocksVCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, |
| 6128 | Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS |
| 6129 | Construction of Sluice Valve chambers with VRCC M20 Concrete suitable to the sluice valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 6130 | For 300mm dia. Sluice Valves and swing check valves |
| 6131 | For 250mm dia. Sluice Valves and swing check valves |
| 6132 | For 200mm dia. Sluice Valves and swing check valves |
| 6133 | For 150mm dia. Sluice Valves and swing check valves |
| 6134 | For 100mm dia. Sluice Valves and swing check valves |
| 6135 | Construction of Scour Valve chambers with VRCC M20 Concrete suitable to the Scour valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 6136 | For 200mm dia. Scour Valves |
| 6137 | For 150mm dia. Scour Valves |
| 6138 | For 100mm dia. Scour Valves |
| 6139 | Construction of Air Valvechambers with VRCC M20 Concrete suitable to the Air valves with VRCC Cover Slab including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work |
| 6140 | For80 mm dia. Air Valves and Air release valves on 300 mm dia |
| 6141 | For80 mm dia. Air Valves and Air release valves on 250 mm dia |
| 6142 | For80mm dia.Air release valves on 200 mm dia |
| 6143 | For80mm dia.Air valves on 150 mm dia |
| 6144 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work |
| 6145 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. |
| 6146 | Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excluding all taxes and including transportation |
| 6147 | 300mm dia |
| 6148 | 250mm dia |
| 6149 | 200mm dia |
| 6150 | 150 mm dia |
| 6151 | 100 mm dia |
| 6152 | Items for implementation of EMP to be included in the estimate |
| 6153 | Air Quality Monitoring (4 Monitoring station) once in a month for three seasons during the construction period at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6154 | Noiselevel(4Monitoringstation)onceinamonthforthree seasonsduring the constructionperiod Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6155 | Water Quality Monitoring surface / ground(4 Monitoring station)once in a month for three seasons during theconstructionperiod at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6156 | Air Quality Monitoring (4 Monitoring station) once in a month for three seasons during the construction period at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6157 | Noiselevel(4Monitoringstation)onceinamonthforthree seasonsduring the constructionperiod Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6158 | Water Quality Monitoring surface / ground(4 Monitoring station)once in a month for three seasons during theconstructionperiod at Intake well, WTP, GLBR, ELSR\"s, Raw/Clear Pipe Line & Distribution network |
| 6159 | Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)-plants & tree guards |
| 6160 | Greenbelt development and maintenance in the surroundings / Buffer zone |
| 6161 | Health checkups and free medical distribution (4 Camps) |
| 6162 | Awareness program/training (every Six Months - 4 Camps) |
| 6163 | Sprinkling of wateronce in a day fortwo years (excluding rainy days) |
| 6164 | Hiring for 1 Nos. Vehicleduring execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc., |
| 6165 | Construction of Clear Water SCADA Room 8.00 x 12.00 Size at WTP. |
| 6166 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means. |
| 6167 | Manual Means upto 3 metres depth in ordinary soil |
| 6168 | Mechanical Means up to 3 metres depth in Ordinary Soil |
| 6169 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 6170 | Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5). |
| 6171 | Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work. |
| 6172 | Providing VRCC M25 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 380Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) |
| 6173 | Providing VRCC M25 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 380Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) |
| 6174 | Providing VRCC M25 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 380Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) |
| 6175 | Footings |
| 6176 | Pedastals around Columns |
| 6177 | Columns Up to plinth |
| 6178 | Plinth Beams 300 x 400 |
| 6179 | Columns |
| 6180 | Up to First Floor Roof Level |
| 6181 | Beams 230 x 500 |
| 6182 | Lintels |
| 6183 | Sunshades |
| 6184 | Staircase slab 0.15 m thick |
| 6185 | RCC Slab 150mm thick |
| 6186 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel barsFe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 |
| 6187 | Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1). |
| 6188 | For Ground Floor Level |
| 6189 | For First Floor Level |
| 6190 | 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials. |
| 6191 | Plastering with CM (1:3), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 6192 | Ground Floor |
| 6193 | For First Floor |
| 6194 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 6195 | Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. |
| 6196 | Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., completefor finished item of work |
| 6197 | Flooring with ceramic tiles of size (600X 600, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. |
| 6198 | Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. |
| 6199 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 6200 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 6201 | Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities. |
| 6202 | Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door |
| 6203 | Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work . |
| 6204 | Door Frame section of 63.5x100 MM The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member |
| 6205 | Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame |
| 6206 | Supplying and fixing of Top Hung Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, The Ventilator to be panelled 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work. |
| 6207 | Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodized Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodized aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work |
| 6208 | Supply and fixing of 25 mm dia 2.20 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages |
| 6209 | Supply and fixing of 20 mm dia 2.10 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages |
| 6210 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building |
| 6211 | Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges |
| 6212 | supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges |
| 6213 | supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc. |
| 6214 | supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc., |
| 6215 | Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete |
| 6216 | Supply and fixing TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3 |
| 6217 | Supply of 48\" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton HS Plus / Havells ES Neo/OrientEnergy Star/ Halonix(Zephyr)/Polycab(Synergy Star)unit each |
| 6218 | Supply of stepped type Electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CPL |
| 6219 | Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs..Unit each |
| 6220 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith 23 / 0060 twin core twisted / flat heavy Copper wire etc., complete |
| 6221 | Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with 23 / 0060 twin core twisted / flat heavy Copper wire / TW round blocks with all accessories including giving connections and all labour charges etc., complete. |
| 6222 | Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/hr andabove with operating on refrigerant R-410A / R-32 INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation.Makes: Blue star BAFU-DAFU series / Hitachi / Daikin |
| 6223 | Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks |
| 6224 | Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work |
| 6225 | Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm brass plumber union, 31.75mm dia PVC flexible waste pipe of 914.4mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work |
| 6226 | Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. |
| 6227 | Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) |
| 6228 | Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand |
| 6229 | Labour charges for laying, fixing and commissioning the PVC pipes including Supplying & fixing 76.2 mm W.I clamps/ couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice |
| 6230 | Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg |
| 6231 | S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete |
| 6232 | 25 mm dia nominal bore -from tank to jn forof individual lines and inlet |
| 6233 | 20 mm dia nominal bore -fromjn forof individual lines to toilets |
| 6234 | 15 mm dia nominal bore -for internal |
| 6235 | S&F of GI & GM fittings |
| 6236 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size |
| 6237 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size |
| 6238 | GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size |
| 6239 | S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent |
| 6240 | S& F GI union Ist Quality |
| 6241 | 12.70mm |
| 6242 | 19.05mm |
| 6243 | 25.40mm |
| 6244 | Laying new Distribution lineszone-I |
| 6245 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches etc complete and all labour charges,andother incidental charges etc complete as per ss and as directed by the departemntal officer in charges of work. |
| 6246 | Mechanical Means Upto 3 m depth 70% |
| 6247 | Manual means 30% |
| 6248 | Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ssand as directed by the departmental officer in chrges of work |
| 6249 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S as directed by the departemntal officer in charges of work. |
| 6250 | 110mm dia. |
| 6251 | 160mm dia. |
| 6252 | 200mm dia. |
| 6253 | 250mm dia. |
| 6254 | 315 mm dia. |
| 6255 | 355 mm dia. |
| 6256 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete |
| 6257 | a) Pipe ends - long neck |
| 6258 | 110mm dia. |
| 6259 | 160mm dia. |
| 6260 | 160 mm dia for Air TEEs |
| 6261 | 200mm dia. |
| 6262 | 200 mm dia for Air TEEs |
| 6263 | 250mm dia. |
| 6264 | 250 mm dia for Air TEEs |
| 6265 | 315 mm dia. |
| 6266 | 315 mm dia for Air TEEs |
| 6267 | 315 mm dia for bulk flow meter |
| 6268 | b) MS Flanges |
| 6269 | 110mm dia. |
| 6270 | 160mm dia. |
| 6271 | 160 mm dia for Air TEEs |
| 6272 | 200mm dia. |
| 6273 | 200 mm dia for Air TEEs |
| 6274 | 250mm dia. |
| 6275 | 250 mm dia for Air TEEs |
| 6276 | 315 mm dia. |
| 6277 | 315 mm dia for Air TEEs |
| 6278 | 315 mm dia for bulk flow meter |
| 6279 | c) End Caps |
| 6280 | 110mm dia. |
| 6281 | 160mm dia. |
| 6282 | 200mm dia. |
| 6283 | d) Reducers |
| 6284 | 110X125 mmdia |
| 6285 | 125x140 mm dia |
| 6286 | 140x160 mm dia |
| 6287 | 160x180 mm dia |
| 6288 | 180x200 mm dia |
| 6289 | 200x225 mm dia |
| 6290 | 225x250 mm dia |
| 6291 | 250x280 mm dia |
| 6292 | 280x315 mm dia |
| 6293 | e) TEES |
| 6294 | 110mm dia. |
| 6295 | 160mm dia. |
| 6296 | 200mm dia. |
| 6297 | 250mm dia. |
| 6298 | 315 mm dia. |
| 6299 | F)BENDS |
| 6300 | 110mm dia. |
| 6301 | 160mm dia. |
| 6302 | 200mm dia. |
| 6303 | 250mm dia. |
| 6304 | 315 mm dia. |
| 6305 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete |
| 6306 | 110mm dia. |
| 6307 | 160mm dia. |
| 6308 | 200mm dia. |
| 6309 | 250mm dia. |
| 6310 | 315 mm dia. |
| 6311 | 355 mm dia. |
| 6312 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6313 | 100X2.00m on 110 dia mains for scours |
| 6314 | 100X2.00m on 160 dia mains for scours |
| 6315 | 100x1.00m long DF pipes for sluice valves |
| 6316 | 150X2.00mon 200 mm dia mains for scours |
| 6317 | 150X2.00mon 250 mm dia mains for scours |
| 6318 | 150x1.00m long DF pipes for sluice valves |
| 6319 | 200x1.00m long DF pipes for sluice valves |
| 6320 | 250x1.00m long DF pipes for sluice valves |
| 6321 | 300x1.00m long DF pipes for sluice valves |
| 6322 | 300x1.00m long DF pipes for for bulk flow meter |
| 6323 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6324 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -as follows |
| 6325 | 100 mm distrubution |
| 6326 | 150mm dia for distrubution |
| 6327 | 200mm dia for distrubution |
| 6328 | 250mm dia for distrubution |
| 6329 | 300mm dia for distrubution |
| 6330 | for scour |
| 6331 | 100mm diaon 110 mmdia mains |
| 6332 | 100mm diaon160 mm dia mains |
| 6333 | 150 mm dia on 200 mm dia lines |
| 6334 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 as follows |
| 6335 | 80 mm dia on 160 mm pipe |
| 6336 | 80 mm dia on 200 mm pipe |
| 6337 | 80mm dia 250 mm pipe |
| 6338 | 80mm dia 315 mm pipe |
| 6339 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. as follows |
| 6340 | 100 mm distrubution |
| 6341 | 150mm dia for distrubution |
| 6342 | 200mm dia for distrubution |
| 6343 | 250mm dia for distrubution |
| 6344 | 300mm dia for distrubution |
| 6345 | 300 mm for bulk flow meter |
| 6346 | for scour |
| 6347 | 100mm diaon 110 mmdia mains |
| 6348 | 100mm diaon160 mm dia mains |
| 6349 | 150 mm dia on 200 mm dia lines |
| 6350 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 6351 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work |
| 6352 | 100 mm distrubution |
| 6353 | 150mm dia for distrubution |
| 6354 | 200mm dia for distrubution |
| 6355 | 250mm dia for distrubution |
| 6356 | 300mm dia for distrubution |
| 6357 | 300 mm for bulk flow meter |
| 6358 | for scour |
| 6359 | 100mm diaon 110 mmdia mains |
| 6360 | 100mm diaon160 mm dia mains |
| 6361 | 150 mm dia on 200 mm dia lines |
| 6362 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work |
| 6363 | 80 mm dia on 160 mm pipe |
| 6364 | 80 mm dia on 200 mm pipe |
| 6365 | 80mm dia 250 mm pipe |
| 6366 | 80mm dia 315 mm pipe |
| 6367 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. |
| 6368 | 100 mm |
| 6369 | 150 mm dia |
| 6370 | 200 mm dia |
| 6371 | 250 mm dia |
| 6372 | 300 mm dia |
| 6373 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. |
| 6374 | 80 mm dia |
| 6375 | 100 mm dia |
| 6376 | 150 mm dia |
| 6377 | 200 mm dia |
| 6378 | 250 mm dia |
| 6379 | 300 mm dia |
| 6380 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6381 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6382 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6383 | Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 6384 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 6385 | Laying new Distribution lineszone-II |
| 6386 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 6387 | Mechanical Means Upto 3 m depth 70% |
| 6388 | Manual means 30% |
| 6389 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 6390 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.Sas follows |
| 6391 | 110mm dia. |
| 6392 | 160mm dia. |
| 6393 | 200mm dia. |
| 6394 | 250mm dia. |
| 6395 | 315 mm dia. |
| 6396 | 355 mm dia. |
| 6397 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as follows |
| 6398 | a) Pipe ends - long neck |
| 6399 | 110mm dia. |
| 6400 | 160mm dia. |
| 6401 | 160 mm dia for Air TEEs |
| 6402 | 200mm dia. |
| 6403 | 200 mm dia for Air TEEs |
| 6404 | 250mm dia. |
| 6405 | 250 mm dia for Air TEEs |
| 6406 | 315 mm dia. |
| 6407 | 315 mm dia for Air TEEs |
| 6408 | 355 mm dia for bulk flow meter |
| 6409 | 355 mm dia |
| 6410 | 355 mm dia for Air TEEs |
| 6411 | b) MS Flanges |
| 6412 | 110mm dia. |
| 6413 | 160mm dia. |
| 6414 | 160 mm dia for Air TEEs |
| 6415 | 200mm dia. |
| 6416 | 200 mm dia for Air TEEs |
| 6417 | 250mm dia. |
| 6418 | 250 mm dia for Air TEEs |
| 6419 | 315 mm dia. |
| 6420 | 315 mm dia for Air TEEs |
| 6421 | 355 mm dia for bulk flow meter |
| 6422 | 355 mm dia |
| 6423 | 355 mm dia for Air TEEs |
| 6424 | c) End Caps |
| 6425 | 110mm dia. |
| 6426 | 160mm dia. |
| 6427 | 200mm dia. |
| 6428 | 250mm dia. |
| 6429 | 315 mm dia. |
| 6430 | d) Reducers |
| 6431 | 110X125 mmdia |
| 6432 | 125x140 mm dia |
| 6433 | 140x160 mm dia |
| 6434 | 160x180 mm dia |
| 6435 | 180x200 mm dia |
| 6436 | 200x225 mm dia |
| 6437 | 225x250 mm dia |
| 6438 | 250x280 mm dia |
| 6439 | 280x315 mm dia |
| 6440 | 315x355 mm dia |
| 6441 | e) TEES |
| 6442 | 110mm dia. |
| 6443 | 160mm dia. |
| 6444 | 200mm dia. |
| 6445 | 250mm dia. |
| 6446 | 315 mm dia. |
| 6447 | 355 mm dia |
| 6448 | F)BENDS |
| 6449 | 110mm dia. |
| 6450 | 160mm dia. |
| 6451 | 200mm dia. |
| 6452 | 250mm dia. |
| 6453 | 315 mm dia. |
| 6454 | 355 mm dia |
| 6455 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as follows |
| 6456 | 110mm dia. |
| 6457 | 160mm dia. |
| 6458 | 200mm dia. |
| 6459 | 250mm dia. |
| 6460 | 315 mm dia. |
| 6461 | 355 mm dia. |
| 6462 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6463 | DIDF pipes for scours |
| 6464 | 100X2.00m on 110 dia mains for scours |
| 6465 | 100X2.00m on 160 dia mains for scours |
| 6466 | 100x1.00m long DF pipes for sluice valves |
| 6467 | 150x1.00m long DF pipes for sluice valves |
| 6468 | 200x1.00m long DF pipes for sluice valves |
| 6469 | 250x1.00m long DF pipes for sluice valves |
| 6470 | 300x1.00m long DF pipes for sluice valves |
| 6471 | 350x1.00m long DF pipes for for bulk flow meter |
| 6472 | 350x1.00m long DF pipes for sluice valves |
| 6473 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6474 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - |
| 6475 | 100 mm distrubution |
| 6476 | 150mm dia for distrubution |
| 6477 | 200mm dia for distrubution |
| 6478 | 250mm dia for distrubution |
| 6479 | 300mm dia for distrubution |
| 6480 | 350mm dia for distrubution |
| 6481 | for scour |
| 6482 | 100mm diaon 110 mmdia mains |
| 6483 | 100mm diaon160 mm dia mains |
| 6484 | 150 mm dia on 200 mm dia lines |
| 6485 | 150 mm dia on 250mm dia lines |
| 6486 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 |
| 6487 | 80 mm dia on 160 mm pipe |
| 6488 | 80 mm dia on 200 mm pipe |
| 6489 | 80mm dia 250 mm pipe |
| 6490 | 80mm dia 315 mm pipe |
| 6491 | 80mm dia 355 mm pipe |
| 6492 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 6493 | 100 mm distrubution |
| 6494 | 150mm dia for distrubution |
| 6495 | 200mm dia for distrubution |
| 6496 | 250mm dia for distrubution |
| 6497 | 300mm dia for distrubution |
| 6498 | 350mm dia for distrubution |
| 6499 | 350mm dia for bulk flow meter |
| 6500 | for scour |
| 6501 | 100mm diaon 110 mmdia mains |
| 6502 | 100mm diaon160 mm dia mains |
| 6503 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 6504 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work as follows |
| 6505 | 100 mm distrubution |
| 6506 | 150mm dia for distrubution |
| 6507 | 200mm dia for distrubution |
| 6508 | 250mm dia for distrubution |
| 6509 | 300mm dia for distrubution |
| 6510 | 350mm dia for distrubution |
| 6511 | 350mm dia for bulk flow meter |
| 6512 | for scour |
| 6513 | 100mm diaon 110 mmdia mains |
| 6514 | 100mm diaon160 mm dia mains |
| 6515 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of workas follows |
| 6516 | 80 mm dia on 160 mm pipe |
| 6517 | 80 mm dia on 200 mm pipe |
| 6518 | 80mm dia 250 mm pipe |
| 6519 | 80mm dia 315 mm pipe |
| 6520 | 80mm dia 355 mm pipe |
| 6521 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as follows |
| 6522 | 100 mm |
| 6523 | 150 mm dia |
| 6524 | 200 mm dia |
| 6525 | 250 mm dia |
| 6526 | 300 mm dia |
| 6527 | 350 mm dia |
| 6528 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.as follows |
| 6529 | 80 mm dia |
| 6530 | 100 mm dia |
| 6531 | 150 mm dia |
| 6532 | 200 mm dia |
| 6533 | 250 mm dia |
| 6534 | 300 mm dia |
| 6535 | 350 mm dia |
| 6536 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6537 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6538 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6539 | Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 6540 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 6541 | Laying new Distribution lineszone-III |
| 6542 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 6543 | Mechanical Means Upto 3 m depth 70% |
| 6544 | Manual means 30% |
| 6545 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 6546 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S as follows |
| 6547 | 110mm dia. |
| 6548 | 160mm dia. |
| 6549 | 200mm dia. |
| 6550 | 250mm dia. |
| 6551 | 315 mm dia. |
| 6552 | 355 mm dia. |
| 6553 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as follows |
| 6554 | a) Pipe ends - long neck |
| 6555 | 110mm dia. |
| 6556 | 160mm dia. |
| 6557 | 160 mm dia for Air TEEs |
| 6558 | 200mm dia. |
| 6559 | 200 mm dia for Air TEEs |
| 6560 | 250mm dia. |
| 6561 | 250 mm dia for Air TEEs |
| 6562 | 315 mm dia. |
| 6563 | 315 mm dia for Air TEEs |
| 6564 | 315 mm dia for bulk flow meter |
| 6565 | b) MS Flanges |
| 6566 | 110mm dia. |
| 6567 | 160mm dia. |
| 6568 | 160 mm dia for Air TEEs |
| 6569 | 200mm dia. |
| 6570 | 200 mm dia for Air TEEs |
| 6571 | 250mm dia. |
| 6572 | 250 mm dia for Air TEEs |
| 6573 | 315 mm dia. |
| 6574 | 315 mm dia for Air TEEs |
| 6575 | 315 mm dia for bulk flow meter |
| 6576 | c) End Caps |
| 6577 | 110mm dia. |
| 6578 | 160mm dia. |
| 6579 | 200mm dia. |
| 6580 | d) Reducers |
| 6581 | 110X125 mmdia |
| 6582 | 125x140 mm dia |
| 6583 | 140x160 mm dia |
| 6584 | 160x180 mm dia |
| 6585 | 180x200 mm dia |
| 6586 | 200x225 mm dia |
| 6587 | 225x250 mm dia |
| 6588 | 250x280 mm dia |
| 6589 | 280x315 mm dia |
| 6590 | e) TEES |
| 6591 | 110mm dia. |
| 6592 | 160mm dia. |
| 6593 | 200mm dia. |
| 6594 | 250mm dia. |
| 6595 | 315 mm dia. |
| 6596 | F)BENDS |
| 6597 | 110mm dia. |
| 6598 | 160mm dia. |
| 6599 | 200mm dia. |
| 6600 | 250mm dia. |
| 6601 | 315 mm dia. |
| 6602 | 355 mm dia |
| 6603 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as follows |
| 6604 | 110mm dia. |
| 6605 | 160mm dia. |
| 6606 | 200mm dia. |
| 6607 | 250mm dia. |
| 6608 | 315 mm dia. |
| 6609 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6610 | 100X2.00m on 110 dia mains for scours |
| 6611 | 100x1.00m long DF pipes for sluice valves |
| 6612 | 150X2.00mon 200 mm dia mains for scours |
| 6613 | 150x1.00m long DF pipes for sluice valves |
| 6614 | 200x1.00m long DF pipes for sluice valves |
| 6615 | 250x1.00m long DF pipes for sluice valves |
| 6616 | 300x1.00m long DF pipes for sluice valves |
| 6617 | 300x1.00m long DF pipes for for bulk flow meter |
| 6618 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6619 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -as follows |
| 6620 | 100 mm distrubution |
| 6621 | 150mm dia for distrubution |
| 6622 | 200mm dia for distrubution |
| 6623 | 250mm dia for distrubution |
| 6624 | 300mm dia for distrubution |
| 6625 | for scour |
| 6626 | 100mm diaon 110 mmdia mains |
| 6627 | 150 mm dia on 200 mm dia lines |
| 6628 | 150 mm dia on 250mm dia lines |
| 6629 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 as follows |
| 6630 | 80 mm dia on 160 mm pipe |
| 6631 | 80 mm dia on 200 mm pipe |
| 6632 | 80mm dia 250 mm pipe |
| 6633 | 80mm dia 315 mm pipe |
| 6634 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.as follows |
| 6635 | 100 mm distrubution |
| 6636 | 150mm dia for distrubution |
| 6637 | 200mm dia for distrubution |
| 6638 | 250mm dia for distrubution |
| 6639 | 300mm dia for distrubution |
| 6640 | 300 mm for bulk flow meter |
| 6641 | for scour |
| 6642 | 100mm diaon 110 mmdia mains |
| 6643 | 100mm diaon160 mm dia mains |
| 6644 | 150 mm dia on 200 mm dia lines |
| 6645 | 150 mm dia on 250mm dia lines |
| 6646 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 6647 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of workas follows |
| 6648 | 100 mm distrubution |
| 6649 | 150mm dia for distrubution |
| 6650 | 200mm dia for distrubution |
| 6651 | 250mm dia for distrubution |
| 6652 | 300mm dia for distrubution |
| 6653 | 300 mm for bulk flow meter |
| 6654 | for scour |
| 6655 | 100mm diaon 110 mmdia mains |
| 6656 | 150 mm dia on 200 mm dia lines |
| 6657 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work as follows |
| 6658 | 80 mm dia on 160 mm pipe |
| 6659 | 80 mm dia on 200 mm pipe |
| 6660 | 80mm dia 250 mm pipe |
| 6661 | 80mm dia 315 mm pipe |
| 6662 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as follows |
| 6663 | 100 mm |
| 6664 | 150 mm dia |
| 6665 | 200 mm dia |
| 6666 | 250 mm dia |
| 6667 | 300 mm dia |
| 6668 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.as follows |
| 6669 | 80 mm dia |
| 6670 | 100 mm dia |
| 6671 | 150 mm dia |
| 6672 | 200 mm dia |
| 6673 | 250 mm dia |
| 6674 | 300 mm dia |
| 6675 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6676 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6677 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6678 | Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 6679 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 6680 | Laying new Distribution lineszone-IV |
| 6681 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches |
| 6682 | Mechanical Means Upto 3 m depth 70% |
| 6683 | Manual means 30% |
| 6684 | Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge |
| 6685 | Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S as follows |
| 6686 | 110mm dia. |
| 6687 | 160mm dia. |
| 6688 | 250mm dia. |
| 6689 | 315 mm dia. |
| 6690 | Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as follows |
| 6691 | a) Pipe ends - long neck |
| 6692 | 110mm dia. |
| 6693 | 160mm dia. |
| 6694 | 160 mm dia for Air TEEs |
| 6695 | 250mm dia. |
| 6696 | 250 mm dia for Air TEEs |
| 6697 | 315 mm dia. |
| 6698 | 315 mm dia for Air TEEs |
| 6699 | 315 mm dia for bulk flow meter |
| 6700 | b) MS Flanges |
| 6701 | 110mm dia. |
| 6702 | 160mm dia. |
| 6703 | 160 mm dia for Air TEEs |
| 6704 | 250mm dia. |
| 6705 | 250 mm dia for Air TEEs |
| 6706 | 315 mm dia. |
| 6707 | 315 mm dia for Air TEEs |
| 6708 | 315 mm dia for bulk flow meter |
| 6709 | c) End Caps |
| 6710 | 110mm dia. |
| 6711 | 160mm dia. |
| 6712 | d) Reducers |
| 6713 | 110X125 mmdia |
| 6714 | 125x140 mm dia |
| 6715 | 140x160 mm dia |
| 6716 | 160x180 mm dia |
| 6717 | 180x200 mm dia |
| 6718 | 200x225 mm dia |
| 6719 | 225x250 mm dia |
| 6720 | 250x280 mm dia |
| 6721 | 280x315 mm dia |
| 6722 | e) TEES |
| 6723 | 110mm dia. |
| 6724 | 160mm dia. |
| 6725 | 250mm dia. |
| 6726 | 315 mm dia. |
| 6727 | F)BENDS |
| 6728 | 110mm dia. |
| 6729 | 160mm dia. |
| 6730 | 250mm dia. |
| 6731 | 315 mm dia. |
| 6732 | Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as follows |
| 6733 | 110mm dia. |
| 6734 | 160mm dia. |
| 6735 | 200mm dia. |
| 6736 | 250mm dia. |
| 6737 | 315 mm dia. |
| 6738 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6739 | 100X2.00m on 110 dia mains for scours |
| 6740 | 100X2.00m on 160 dia mains for scours |
| 6741 | 100x1.00m long DF pipes for sluice valves |
| 6742 | 150x1.00m long DF pipes for sluice valves |
| 6743 | 250x1.00m long DF pipes for sluice valves |
| 6744 | 300x1.00m long DF pipes for sluice valves |
| 6745 | 300x1.00m long DF pipes for for bulk flow meter |
| 6746 | Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. |
| 6747 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -as follows |
| 6748 | 100 mm distrubution |
| 6749 | 150mm dia for distrubution |
| 6750 | 250mm dia for distrubution |
| 6751 | 300mm dia for distrubution |
| 6752 | for scour |
| 6753 | 100mm diaon 110 mmdia mains |
| 6754 | 100mm diaon160 mm dia mains |
| 6755 | 150 mm dia on 200 mm dia lines |
| 6756 | 150 mm dia on 250mm dia lines |
| 6757 | Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 as follows |
| 6758 | 80 mm dia on 160 mm pipe |
| 6759 | 80mm dia 250 mm pipe |
| 6760 | 80mm dia 315 mm pipe |
| 6761 | Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. |
| 6762 | 100 mm distrubution |
| 6763 | 150mm dia for distrubution |
| 6764 | 250mm dia for distrubution |
| 6765 | 300mm dia for distrubution |
| 6766 | 300 mm for bulk flow meter |
| 6767 | for scour |
| 6768 | 100mm diaon 110 mmdia mains |
| 6769 | 100mm diaon160 mm dia mains |
| 6770 | Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. |
| 6771 | Construction of sluice and scourValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work as follows |
| 6772 | 100 mm distrubution |
| 6773 | 150mm dia for distrubution |
| 6774 | 250mm dia for distrubution |
| 6775 | 300mm dia for distrubution |
| 6776 | 300 mm for bulk flow meter |
| 6777 | for scour |
| 6778 | 100mm diaon 110 mmdia mains |
| 6779 | 100mm diaon160 mm dia mains |
| 6780 | Construction of AirValve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work as follows |
| 6781 | 80 mm dia on 160 mm pipe |
| 6782 | 80mm dia 250 mm pipe |
| 6783 | 80mm dia 315 mm pipe |
| 6784 | Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.as follows |
| 6785 | 100 mm |
| 6786 | 150 mm dia |
| 6787 | 250 mm dia |
| 6788 | 300 mm dia |
| 6789 | Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.as follows |
| 6790 | 80 mm dia |
| 6791 | 100 mm dia |
| 6792 | 150 mm dia |
| 6793 | 250 mm dia |
| 6794 | 300 mm dia |
| 6795 | Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6796 | Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6797 | Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work. |
| 6798 | Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH |
| 6799 | Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads |
| 6800 | Providing & Shifiting ofhouse service connections at house holds side in earthern roads |
| 6801 | Providing house service connections on HDPE mains at House holdside in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 6802 | Fixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe including labour charges,hire charges etc complete (For HDPE / PVC Pipes) ( supplied items) |
| 6803 | Providing & Shifiting of house service connections at other side in earthern roads |
| 6804 | Providing house service connections on HDPE mains at other side in Earthen Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 6805 | Fixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe including labour charges,hire charges etc complete (For HDPE / PVC Pipes) ( supplied items) |
| 6806 | Providing & Shifiting ofhouse service connections at HHside in BT &CCroads |
| 6807 | Providing house service connections on HDPE mains at other side in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 6808 | Fixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe including labour charges,hire charges etc complete (For HDPE / PVC Pipes) ( supplied items) |
| 6809 | Providing & Shifiting of house service connections at otherside in BT &CCroads |
| 6810 | Providing house service connections on HDPE mains at House holdside in B.T & CC Roads with Earthwork Excavation in all type of soils fixing PP Saddle,PP Clamp Saddle shall be manufactured by injection moulding using virigin Polypropylene,Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organismaxes etc,FOR main pipes Hdpe /PVC of 110mm dia .flow control valve SS 316 NRV 10 LPM ,Compression adaptor with one side compression end to suit 1/2 \"to1\"\"(15mmOD to25 mm OD)MDPE pipe and other side with female threaded with SS-304 material inserts of sizes 1/2\" BSP threads,body,nut, and cap of poly propylene,clip ring PP Compression Metal insert female Threaded Adaptorcompression adaptor with one side compression end to suit 1/2\"\" to 1\"\" mdpe pipe and other side with female thread with ss-304 material inserts of sizes 1/2\"\" BSP thread,PP compression elbow to suit 1/2 \" to 1\"\" (15mm OD to 25 mm OD) MDPE pipe body, nuts, and caps of polypropelene, clip ring of POM(Acetylic resin) and and \"O\" ring of NBR material,as per ISO 14236 standardsDouble compression elbow to suit 20mm OD for 100mm, MDPE PE80 Blue pipe as per ISO 4427 up to date 1. for conveyance of potable water ,MDPE 20mm OD pipe (2.00 m avg length for each of 1/2\"\" HSC) of SDR 9-PN-16 for pipes side,Premium make UPVC Pipes with Fittings.(IS 4985/2000)(PH SSR :20) UPVCpipe for 40 mm (Casing for drain crossing)fixing of 12.7 mm brass bib cock indian make heavy duty long bodyFixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe (For HDPE / PVC Pipes)Making Holes upto 18 mm Dia in RCC/any Stones up to 50 mm Thick( BMS-W78)Fixing of 25.4 mm Holder Back Clamps at Drain Crossing this rate cost of above all materials ,Including all Labour Charges ,other incidental charges etc for finished item of work and as directed by the departmental officer in charge of work |
| 6811 | Fixing of House service connections,including fixing of ferrule, MDPE/GI pipes and specials and connecting newly laid pipe including labour charges,hire charges etc complete (For HDPE / PVC Pipes) ( supplied items) |
| 6812 | :: EAST GODAVARI PUBLIC HEALTH CIRCLE :: MUMMIDIVARAM DISTRICT:: |
| 6813 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 6814 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6815 | Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties |
| 6816 | Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer |
| 6817 | DN 200 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification |
| 6818 | DN 150 - PN 16 pump control valve for Clear Water Pumping Station as per the above specification |
| 6819 | Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 6820 | 300 MM Dia Above Specification. |
| 6821 | 400 MM Dia Above Specification. |
| 6822 | 500 MM Dia Above Specification. |
| 6823 | Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 6824 | Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 6825 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 6826 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 6827 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6828 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 6829 | Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 6830 | Reservoir Inlet Management :: |
| 6831 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. |
| 6832 | Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 6833 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 6834 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6835 | Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6836 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 6837 | Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes. |
| 6838 | Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6839 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 6840 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6841 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6842 | Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6843 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6844 | 24 x 7 Water Supply ::DMA Management :: |
| 6845 | supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. |
| 6846 | Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 6847 | Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 6848 | Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6849 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer |
| 6850 | Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer. |
| 6851 | Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6852 | Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6853 | Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6854 | Providing, Installing and satisfactory field testing of Self Powered Pressure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. |
| 6855 | Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer. |
| 6856 | AMI Water Meter Management. |
| 6857 | Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A. |
| 6858 | Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-B |
| 6859 | Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer. |
| 6860 | Establishment of Local SCADA station at Mummidivaram Municipality with the above specifications. |
| 6861 | Establishment of Local SCADA station at Mummidivaram Municipality with the above specifications. |
| 6862 | Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge. |
| 6863 | Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual |
| 6864 | Manning, Operation and Maintenance of Water Supply Improvement Scheme |
| 6865 | Engary man power skilled/ Semiskilled like operation, Electrician., ump operation machanic, helper,watch man , filer bed peration, Diploma Engineering, lab technician technical work inspector as per requriment .This rate including wagrs along with miunicipal allowance, cinveyance charges transportion to site including statutory provisions as per norm complete for sucessful Maintenance of the entire scheme and s directed by the departmental officer in charge sof work for 7yers including 2years Defect liabiliy period as follows |
| 6866 | Personal required for operating Intake/Offtake well/Pump houses Operator |
| 6867 | Personal required for operating Intake/Offtake well/Pump houses Fitter/Helper |
| 6868 | Personal required at operating Raw water rising mainsFitter/Helper |
| 6869 | Personal required at operating Water treatment plants & Sump Operator |
| 6870 | Personal required at operating Water treatment plants & Sump Fitter/Helper |
| 6871 | Lab Technician |
| 6872 | Electrician /Mechanic |
| 6873 | Watch man |
| 6874 | Personal required at operating Clear water rising mains Fitter/Helper |
| 6875 | Personal required at operating Service reservoirs Watch man |
| 6876 | Personal required at operating distribution system Fitter/Helper |
| 6877 | Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines. |
| 6878 | Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement at 15 mg/lit |
| 6879 | Repairs to pumpsets & Water pipe lines(2 years after execution period) |
| 6880 | i) Replacement of bearings of pumpsets |
| 6881 | ii) Replacement of sleeves |
| 6882 | iii) Raw Water Motors |
| 6883 | iv)Replacement of glands of sluice valves |
| 6884 | v) Replacements of balls of Air valves |
| 6885 | vi) Greease |
| 6886 | vii) Gland Packing |
| 6887 | LEAKAGES |
| 6888 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete as follows |
| 6889 | 500 mm DI Pipes |
| 6890 | 350 mm DI Pipes |
| 6891 | 300 mm DI Pipes |
| 6892 | 200 mm DI Pipes |
| 6893 | 150 mm DI Pipes |
| 6894 | Rectification of Leakages due to damage of Rubber rings by cocking the joint with lead wool and Hump yarn etc complete as follows |
| 6895 | 500 mm DI Pipes |
| 6896 | 350 mm DI Pipes |
| 6897 | 300 mm DI Pipes |
| 6898 | 200 mm DI Pipes |
| 6899 | 150 mm DI Pipes |
| 6900 | Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete as follows |
| 6901 | 250 mm HDPE Pipes |
| 6902 | 200 mm HDPE Pipes |
| 6903 | 160 mm HDPE Pipes |
| 6904 | 110 mm HDPE Pipes |
| 6905 | :: LOCAL SCADA at ULB LEVEL :: |
| 6906 | To asist to attend the service calls by the seniour service engineer |
| 6907 | With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the GVMC Officials for obtaining of required information when ever asks. |
| 6908 | To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 6909 | Replacement of necessary servicable materials(Reagents) for Chlorine Analysers*Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuets. |
| 6910 | Replacement of necessary tranducers for PH analysers |
| 6911 | Replacement of necessary tranducers for Turbidity analysers |
| 6912 | Interconnection for Data receive station from all Local Contol RTU panels. |
| 6913 | Data transfer from RTU control panels |
| 6914 | Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete |
| 6915 | :: CENTRAL SCADA at CIRCLE LEVEL :: |
| 6916 | To monitor all issues related to both operation & service |
| 6917 | To monitor all meters location through SCADA station and give feedback to the service engineers. |
| 6918 | To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns |
| 6919 | With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks. |
| 6920 | To assist the entire team, dispatches and also maintain SCADA station clean and neat |
| 6921 | Interconnection for Data receive station from all Local Contol RTU panels. |
| 6922 | Data storage and reporting system for view through WEB and Mobile networks |
| 6923 | for day to day Operations & Reporting |
| 6924 | End of BoQ |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
