Tender For Asian Infrastructure Investment Bank (Aiib) - Andhra Pradesh Urban Water Supply And Septage Management Improvement Project (Apuws And Smip), Guntur-Andhra Pradesh

TDR : 51196240

Tender Notice
Corrigendum Details
BOQ

Expired

Guntur , Andhra Pradesh

Tender Brief : Corrigendum : Tender For Asian Infrastructure Investment Bank (Aiib) - Andhra Pradesh Urban Water Supply And Septage Management Improvement Project (Apuws And Smip)

Document Fees
Refer document

EMD
₹ 44688000.0 /-

Tender Value
Refer document

Submission Date
23-10-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	10-10-2025	Extension of Time for bid submission	Date	23-10-2025
2	09-10-2025	CORRIGENDUM	Technical Bid	14-10-2025

Name of Work: PH&ME Department – GoAP – P.H. Quality Control Circle, Guntur - Andhra Pradesh Urban Water Supply and Septage Management Improvement Project (APUWS&SMIP) - Execution of Water Supply Improvement Schemes including completion of the balance stage component works under Source Package, Distribution Network Package including HSCs & Water Meters and Operation & Maintenance in Municipal towns of Nandigama & Tiruvuru in NTR District, Vuyyuru & Pedana in Krishna District and Addanki in Bapatla District under Superintending Engineer, Public Health Quality Control Circle, Guntur with Asian Infrastructure Investment Bank (AIIB) Funding

Sl. No.	Item Description
1	Addanki Municipality
2	Construction of Intake well of 8.0m dia cum Pump house of 8m dia at Gundlakamma Reservoir near Thammavaram Village (Left Over Works & Wing Walls)
3	Earthwork in excavation by Mechanical Means for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specificationetc., complete as per SS and as directed by the departmental officers incharge of the work - up to 3 m depth
4	RBR-FNDN-1- (IV) -Hard rock (blasting prohibited) -up to3.00Mts. below GL: Excavation in Hard Rock in habitant areas where conventional blasting can not be done for structures as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification305 MoRD / 304 MoRTH andas directed by the departmental officer includingprotecting the existing utility services wherever it is possibleduring the execution and taking all precautionary measures in the restricted areas for laying sewer/water pipe lines including divertion of traffic anddisposal of rockupto a lead of 50 m, including all incidental and operational charges etc., complete
5	P.C.C. (1:4:8) using 40 mm graded HBG metal fromapproved quarry including cost,conveyanceof all materials to work site, labour charges, mixing with machine, laying in position, ramming, neat finishing, curing etc complete as per SS and as directed by the departmental officer-in-charge of work. But excluding seigniorage charges.
6	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumBottom Raft Slab of Intake (below bed level 3-4m depth)
7	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumWing Walls of Intake Well - WALLS
8	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumFloor Slab of Pump Room (20cm th.)
9	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumRoof Beams of intakewell
10	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumSide Wallof Pump room (20cm th.)(0-3 m Above G.L)
11	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumSide Wallof Pump room (20cm th.)(3-4 m Above G.L)
12	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumSide Wallof Pump room (20cm th.)(4-5 m Above G.L)
13	Laying VRCC in M 30Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges, centering, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification 1 CumRoof Slab over Pump room (25 cm th.) (0-5 m Above G.L)
14	Providing VRCC in CC M 30 design mix using 20mm graded SS-5 HBG m/c metal and OPC (cement content between 330 to 350 kg/cum as per IRC mix design for Fair degree of quality control), coarse and fine aggregates conforming to IS:383,including cost and conveyance of all materials, machinery,labour, centering, vibration, curing for 21 days and all incidental chargesetc. complete but excluding cost of steel and its fabrication, conforming to standard specification - 1 Cum a) for Lintels, Rolling shutter,Windows, Ventilators
15	Providing VRCC in CC M 30 design mix using 20mm graded SS-5 HBG m/c metal and OPC (cement content between 330 to 350 kg/cum as per IRC mix design for Fair degree of quality control), coarse and fine aggregates conforming to IS:383,including cost and conveyance of all materials, machinery,labour, centering, vibration, curing for 21 days and all incidental chargesetc. complete but excluding cost of steel and its fabrication, conforming to standard specification - 1 Cum b) RCC Sun shades 0.60m wide ,0.10m thick at fixed end and 0.05m at free endunit 1.00 RmtGF upto 3.66m heightcement content 400 kgs/cum M30 design mix for for Rolling shutter,Windows,
16	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
17	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials, labor charges, curing scafolding charges, all taxes, other incidental charges etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges.
18	White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.
19	Supply & fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spn: 1108
20	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work.
21	Manufacture, Supply of Structural steel / I - Sections including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of Plate Girder beams to support Pumps & Motors, Gantry Girder Beams
22	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.
23	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
24	Bailing out water from the trenches with oil engine driven pumpsets, including hire charges and wages for Driver and Helper.
25	Carting away the surplus excavated earth from the work site with a lead of 1 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete
26	Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application..(PN 2.5 (MPa))350mm dia PN 2.5 (MPa)
27	Lowering, keeping in position and fixing CI / DI sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces PH-CISP-15
28	Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code No 1 ) including transportation.
29	Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.Double flanged pipe(350) - 2 mtr
30	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
31	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges
32	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
33	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
34	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
35	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
36	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
37	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
38	Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
39	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
40	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
41	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
42	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
43	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
44	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
45	Labour charges Fixing of 20W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
46	Supply and erection of 3 Nos of of 29.84 Kw VT Pumpsets each with a duty of 78.50 LPS and a total 25 m( two working and one stand bye). for pumping of Rawwaterfrom proposed Raw water Intake well cum pump housein Gundlakamma Reservoirto Aerator at WTP
47	Providing Raw Water Pumping system at Gundlakamma balancing reservior by supply, delivery and erection ofVT pump set with specifications ofHead range of 25 mtrs, discharge of 283 M3/Hr for Raw Water(2 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
48	Supply and Delivery of Verticle Turbine (VT) Pump set: Supply, erection, testing and commissioning ofVertical Turbine pump ( VT pump set) with specifications ofHead and discharge as per above requirement, Speed of pump should be capable for carrying the required NPSHR as per the available NPSHA in site condition and the difference in between NPSHA and NPSHR should bemore than 0.50 Mtr as per HIS code, The pump performance curves should be capable to run in a different speeds without falling head and the discharge may varyaccording to approved pump curve by using VFD Control, field efficiency should not less than 70%,pump material constructions of casing and belmouth with cast iron, impeller, shaft sleeves,muff coupling units-CF-8M ,shaftSleeves and wearings withbronze, shaft with SS410, throdenbering with Bronze with rubber lined, suitable shaft sealing system with stuffing box arrangement, provison for , fixing of suitable diapressure guages with Gliseron filling and the pump driven withLT Squirrel cage inductionDrive rated Motor (Minimum 10% greater thanBKW of pump and nearest available capacity available) with specifications of 3 Phase, 415 Volts, 50HZ, (Syn) RPM suitable for pump selection solid shaft TEFC enclosure, IE-3 and above claas,\"F\" Class insulation, suitable to voltage variation +/- 10% & frequency variation +/- 5% confirming to IS 325/IS 4722 with the accessories of common base frame, Coupling, coupling guard and foundation boltsetc., complete including test certificate from the manufacturer should be submitted by the contractor
49	Erection of pump: Errection, testing and commissioning of above VT pump set with Lowering of the pump with necessary grider arrangement, lowering of Column pipes and Shafts, flanges fixing with suitable packings and coupling to true to allignment, pump foot base erection on Gridrs, fixing of motor, alignment with sutable dial guage equipment, grouting of foundation bolts, CC plingth finishing with masionery works if required, given electrical connections and testing.
50	Internal Pipe lines: Deviery Lines : Supply, laying and jointing of suitable size of MS Flanged pipes from pump to common header by connecting with MS Concentric tapper.Common Header:Supply, laying and jointing of suitable size ofMS Flanged pipes from individual pump main to out side of the pump house. Note: The selected size of the MS/DI Pipe diametersfor above lines cannot be affcting the pump performance.
51	Valves & Accessories for Pipe lines at Pump House:A. Arranging of Non return & Gate/Butterfly valve and SS Expansion bellow for delivery lines of individual pump.B.Arranging ofGate/Butterfly valve & Expansion Bellow on common header at out side of the pump house.C.fixing of suitable dia Vacume and pressure guages with Gliseron filled by providing safety cock on Suction, Individual Pump Delivery and common header.
52	Control MCC & PCC : Fabrication, supply, fixing, errection, termination, testing and commissioning of indoor type, dust and weather proofMCC & PCC Panel fabricating with 16 SWG CR sheet, making individual compartments for components, making internal wiring with suitable al busbars (Concider 0.9 Amp per Sq.MM area) and copper wires for internal wirings as per IE rules, internal and external surface coating with epoxy powder coating with seven tank process and fixing following components complete
53	Suitable capacity ofMCCB with- 55 kA - 3 Pole, MPR, spreader links and ROM set for Incomer1Nos
54	Suitable Capacity of MCCB 36KA 4P MPR, spreader links and ROM set for SCADA & Spare 2Nos
55	Suitable Capacity of MCCB 36KA 3P MPR, spreader links and ROM set with capacitor bank with Capacitor contactor and Time delay relay to maintan greaterthan 0.9 PF while full runnig of the Pumping station 1Nos
56	ProvidingDOL feeder with MPCB, CONTACTOR, add on blocks and other accessories for Vacuum and dewatering pumps2Nos
57	Multifunction metering set with Analog voltmeter and other necessary indication lamps and necessary MCB\"s for control wiring including Power transformer etc., complete for total control panel1Nos
58	Supply, laying, termination and testing suitable capacity of1.0 core PVC sheeted, Copper flexible cable (Concider 1.6 Amps per Sq.MM) for in coming power to Drive control centre and to motors, laying withsuitable size of cable trays/ PVC conduits according to site condition to fixing wall on groung with necessary angle frame work,laying of cable, tiening, both ends crimping, termination and testing (For laying the erath continouty of 1 run from VFD to Motor should be equal to other conductors to motor termination) -1 No1Nos
59	Providing earthing to all control panels, Pump motors and all electrical equipment as per the IE rules with necessary earth pits, Copper/GI earth flats etc., complete. -1 Nos1Nos
60	Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;
61	Ring Spanner 3/16 to 1\" -1 Nos
62	Double end spanner set 3/16\" to 1\"-1 Nos
63	Pipe Wrench 18\" & 4\"-2 Nos
64	Screw drivers 6\", 10\" & 12\" -3 Nos
65	Cutting Plier 12\" -1 Nos
66	2 Kgs Hammer with Handle -1 Nos
67	Nose Plier -1 Nos
68	Flat and Half round smooth file-2 Nos
69	Adjustable Spanner 6\"-1 Nos
70	Column pipe Clamps -2 Nos
71	Line Shaft Clamps-1 Nos
72	Line rope and clamps double the weight of pump -2 Nos
73	Gland thghtening Spanner -1 Nos
74	Spitter removing Spanner -1 Nos
75	Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete-0 Nos
76	Fire extiguisher 3Kg capacity -2 Nos
77	Rubber Mat 6\" x 4\" -2 Nos
78	Fire Buckets with stand and three buckets -1 Nos
79	Rubber Hand Gloves -1 Nos
80	Danger Board Plates -4 Nos
81	First aid kit with chart -1 Nos
82	Shock Treatment Chart -1 Nos
83	Portable rechargeble torch light-1 Nos
84	Supply and delivery of indigeneous make 500 V.. insulation tested a portable type technometer and megger etc;-1 Nos
85	Supply, delivery and erection of suitable capacity (Capacity of the Crane should be two times than the total weight of each pump unit) girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMBof standard make, including the required MS ISMC, MS angular iron,travelling trolley andchain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., -1 Nos
86	All Civil Works Such as anchor Blocks, Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer -1 Nos
87	Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection -1 Job
88	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
89	VFD (HD) for the same capacity of selected motor on the above with the specifications ofthe VFD shall be designed to operating temperature at 50 deg C.. ambient without deration, having facility to trip at Over temperature of VFD heat sink shall be above 115 deg C..,LCD keypadshould be built in display unit with graphical trend monitor, have life monitoring functions for devices like IGBT, Cooling fans and capacitors, communication protocol of profinetandadvanced open loop vector control1Nos
90	Suitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feeder1Nos
91	Suitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feeder 1Nos
92	Power transformer, required push buttons and MFM for each Main pump feeder1Nos
93	Laying of 500mm dia DI Raw Water Pumping Main from Prop. Intake Well to Prop. WTP Aeratorat Foot of the Thammavaram Hillock.
94	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.
95	Providing Sand for fillingfrom approved source including cost and conveyance of all materials to work spotand labour charges for spreading, sectioning, watering, and ramming etc., complete as per SS andas directed by the departmental officer incharge of the work.but excluding Seigniorage Charges
96	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete 500 mm dia DI K9
97	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.500 mm dia DI K9
98	Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 500 mm dia DI K9
99	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.250mm dia 2.00m long DI DF pipes for scour
100	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.500mm dia 2.00m long DI DF pipes at intake well cum pump house
101	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.500mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2
102	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
103	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.250 mm dia
104	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.500 mm dia
105	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85500 mm dia
106	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85250 mm dia
107	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85150 mm dia
108	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S250mm Ø DI D/F valve - PN16 for scour
109	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S150mm Ø DI D/F valve - PN16 for Air valves and Air release valves
110	Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes andtransportation, etc complete ISI marked PN 1.6 (MPa)500mm Ø DI D/F valve - PN16
111	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S150mm dia. PN16
112	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure150mm dia. PN16
113	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.500 mm dia
114	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.500mm dia
115	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.250 mm dia
116	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.150 mm dia
117	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.150 mm dia
118	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.For Thrust Blocks
119	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20For Anchor Blocks
120	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of workfor thurst blocks
121	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 500mm dia
122	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 250 mm dia
123	Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workFor 150 mm dia. Air Valves
124	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete 500mm dia mm
125	Construction of WTPincluding Recycling of Back wash water unit @ WTP
126	Design and Construction of 12.00 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using Gravel & sand as filter media, compatible duly following relevant CHPEEO Manual & IS codes in the design of plant components taking in to consideration 25% overloading including chlorine contact tankand including trial running for 90 days etc.,as per the appended Technical Specification of the tender document and also as per specifications of PHSSR 2025-26. All valves in the Filtration Plant should be compatable for operation with motorised Actuators integrated to SCADA
127	Providing Recycling arrangements, Centrifuge, Sludge Thickner for WTP
128	Construction of 100 KL Collecting Sump at Wtp
129	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - inOrdinary soil - by Mechanical means
130	Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete-
131	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesRaft Slab
132	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesSidewalls of Sump 250mm th
133	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges RingBeams
134	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesRoof slab 200mm thick
135	Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, bindingof reinforcementincluding cost of binding wire etc. complete as per SS but Excluding all taxes
136	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.
137	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
138	White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.
139	Supply & Delivery and fixing of H.D.-20 with 560mm dia. Clear opening manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes as per BIS:12592 (Part 1&2) etc., complete and as directed by the Engineer-in-Charge of the work.
140	Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST
141	Supply and delivery ofPN 1.6 D.I D/F \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment andMaterial of Construction (as per latest codes)charge of the Tender Documentincluding cost and conveyance 150 mm dia Sluice Valve
142	Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves.150mm dia Sluice Valve
143	Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with waterwith a water lead upto 500m and testing to required pressure complete.150mm diaflanged joints
144	Construction of 200 KL SettlingSump at Wtp
145	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m
146	Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete-1 cum for Bed
147	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesFloorSlab
148	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesSidewalls of Sump 250mm th
149	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges RingBeams
150	RCC in M 30Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383,as permix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour chargesRoof slab 200mm thick
151	Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, bindingof reinforcementincluding cost of binding wire etc. complete as per SS but Excluding all taxes
152	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.
153	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
154	White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.
155	Supply & Delivery and fixing of H.D.-20 with 560mm dia. Clear opening manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes as per BIS:12592 (Part 1&2) etc., complete and as directed by the Engineer-in-Charge of the work.
156	Manufacture, supply and delivery of Ductile Iron pipes and fittings (spls). Conforming to IS No.7181/1986, 5531/1988,3950/1979confirming to IS no.8794/1988 at site of work anywhere in A.P. including loading, unloading, transportation to site of work s
157	Supply and delivery ofPN 1.6 D.I D/F \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment andMaterial of Construction (as per latest codes)charge of the Tender Documentincluding cost and conveyance 150 mm dia Sluice Valve
158	Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves.150mm dia Sluice Valve
159	Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with waterwith a water lead upto 500m and testing to required pressure complete.150mm diaflanged joints
160	Provision for 4 No 6 Kw Pumpsets Pump back wash water from sump to Aerator
161	Supply ,delivery,and erection of 4 Nos ofCentrifugalpumpsets of6KW capacity Centrifugalpump sets having discharge of 9 lps againt head of 16 mts with combined efficiency of 60%to pump Back WashWater from Sump to 12MLD WTP with 100% stand by of standard makeincluding suction, and delivery connections , Panel boards, cables, earthing arrangements, Non return valves, Butter fly valves , Providing thrust blocks,M.S specials and pipesconnection upto puming main, ,all taxes and duties,and all labour charges etc., complete including delivery connections upto pumping main.
162	Provision for Sludge Ponds -2 Nos
163	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side
164	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Hard rock (blasting prohibited).
165	Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete-1 cum for Bed
166	RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cementa) FloorSlab
167	RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cementb) Sidewalls of Sump
168	Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, bindingof reinforcementincluding cost of binding wire etc. complete as per SS but including all taxes
169	Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.
170	Construction ofClear Water Sump of 300 KL capacity at WTP
171	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth
172	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--3-6.00m depth
173	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
174	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
175	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Raft slab
176	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick initial height 3.00 mbelow GL
177	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick above GL
178	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Columns
179	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof beams
180	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof slab0.15m thick 0.786*(13.10^2-6.00^2)
181	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof dome slab 0.15m thick
182	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
183	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
184	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
185	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
186	Construction of Clear water Pump Room at WTP
187	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
188	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
189	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
190	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteColumn footings
191	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretePedestals
192	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteColumns
193	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretePlinth beam3.50-0.30
194	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteLintel beams
195	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteRoof Beams
196	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteRoof slab0.125m thick,
197	Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
198	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss Ground floor
199	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss1st floor Parapet wall2(15.90+8.6)=40.66
200	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & insideGround floor
201	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside1st floor Parapet wall
202	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
203	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
204	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
205	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
206	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workWindows1.50x1.20m
207	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
208	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
209	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
210	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
211	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
212	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
213	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
214	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
215	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
216	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
217	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
218	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
219	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
220	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
221	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
222	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
223	Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
224	Supply and erection of Clear Water Pumpsets
225	Supply, delivery and erection ofHSC pump set with specifications ofHead range of 40 mtrs, discharge of 256 M3/Hr for Clear Water(1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. From Clear Water Sump to OHBR
226	Supply, delivery and erection ofHSC pump set with specifications ofHead range of 34 mtrs, discharge of 158 M3/Hr for Clear Water(1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. from Clear Water Intermediate Sump to Different Zones as per approved Designs.
227	Supply, delivery and erection ofHSC pump set with specifications ofHead range of 71 mtrs, discharge of 158 M3/Hr for Clear Water(1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.from Clear Water Intermediate Sump to Different Zones as per approved Designs.
228	Supply, delivery and erection ofHSC pump set with specifications ofHead range of 35 mtrs, discharge of 270 M3/Hr for Clear Water(1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. from Clear Water Intermediate Sump to Different Zones as per approved Designs.
229	Supply and Delivery of HSC Pump set: Suitable capacity of HSC pump set with specifications ofHead and discharge as per above requirement, Speed of pump should be capable for carrying the required NPSHR as per the available NPSHA in site condition and the difference in between NPSHA and NPSHR should bemore than 0.50 Mtr as per HIS code, The pump performance curves should be capable to run in a different speeds without falling head and the discharge may varyaccording to approved pump curve by using VFD Control, field efficiency should not less than 70%,pump material constructions of casing with cast iron, impeller andwearings with SS CF 8M,shaftand shaft Sleeves with ASTM A276-Gr-410, arrangement of gland packing, cooling system,provison for vacume arrangementand the pump driven withLT Squirrel cage inductionDrive rated Motor (Minimum 10% greater thanBKW of pump and nearest available capacity available) with specifications of 3 Phase, 415 Volts, 50HZ, (Syn) RPM suitable for pump selection solid shaft TEFC enclosure, IE-3 and above claas,\"F\" Class insulation, suitable to voltage variation +/- 10% & frequency variation +/- 5% confirming to IS 325/IS 4722 with the accessories of common base frame, Coupling, coupling guard and foundation boltsetc., complete including test certificate from the manufacturer should be submitted by the contractor
230	Erection of pump: Errection, testing and commissioning of above HSC pump set with construction of suitable size concrete base with VRCC M 30 grade, motor and pump unit erected on channel base, lowering on CC base, alignment with sutable dial guage equipment, grouting of foundation bolts, CC plingth finishing with masionery works, given electrical connections and testing 1 Cum
231	Internal Pipe lines: Sucttion Lines : Supply, laying and jointing of suitable size ofDI/ MSFlanged pipes from sump to pump by connecting with MS Concentric tapperDeviery Lines : Supply, laying and jointing of suitable size of MS Flanged pipes from pump to common header by connecting with MS Concentric tapper.Common Header:Supply, laying and jointing of suitable size ofMS Flanged pipes from individual pump main to out side of the pump house. Note: The selected size of the MS/DI Pipe diametersfor above lines cannot be affcting the pump performance 1 Cum
232	Valves & Accessories for Pipe lines at Pump House:A. Arranging of Non return & Gate/Butterfly valve and SS Expansion bellow for delivery lines of individual pump.B.Arranging ofGate/Butterfly valve & Expansion Bellow for Suction line where ever the pumping system under possitive suction.C. Arranging ofGate/Butterfly valve & Expansion Bellow on common header at out side of the pump house.D.fixing of suitable dia Vacume and pressure guages with Gliseron filled by providing safety cock on Suction, Individual Pump Delivery and common header 1 Each
233	Vaccume Pumping: Suitable size of Vaccume pump set with 100% Standby and connectedVaccume pipe lines with suitable GI line and providing heavy duty gate valves for individual pump. Necessary Electrical connections, Suitable coolent tank as required with necessary civil works etc., complete 1 Nos
234	Control MCC & PCC : Fabrication, supply, fixing, errection, termination, testing and commissioning of indoor type, dust and weather proofMCC & PCC Panel fabricating with 16 SWG CR sheet, making individual compartments for components, making internal wiring with suitable al busbars (Concider 0.9 Amp per Sq.MM area) and copper wires for internal wirings as per IE rules, internal and external surface coating with epoxy powder coating with seven tank process and fixing following components complete 1 Nos
235	Suitable capacity ofMCCB with- 55 kA - 3 Pole, MPR, spreader links and ROM set for Incomer
236	Suitable Capacity of MCCB 36KA 4P MPR, spreader links and ROM set for SCADA & Spare
237	Suitable Capacity of MCCB 36KA 3P MPR, spreader links and ROM set with capacitor bank with Capacitor contactor and Time delay relay to maintan greaterthan 0.9 PF while full runnig of the Pumping station
238	ProvidingDOL feeder with MPCB, CONTACTOR, add on blocks and other accessories for Vacuum and dewatering pumps
239	Multifunction metering set with Analog voltmeter and other necessary indication lamps and necessary MCB\"s for control wiring including Power transformer etc., complete for total control panel
240	Supply, laying, termination and testing suitable capacity of1.0 core PVC sheeted, Copper flexible cable (Concider 1.6 Amps per Sq.MM) for in coming power to Drive control centre and to motors, laying withsuitable size of cable trays/ PVC conduits according to site condition to fixing wall on groung with necessary angle frame work,laying of cable, tiening, both ends crimping, termination and testing (For laying the erath continouty of 1 run from VFD to Motor should be equal to other conductors to motor termination)
241	Providing earthing to all control panels, Pump motors and all electrical equipment as per the IE rules with necessary earth pits, Copper/GI earth flats etc., complete.
242	Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;1Nos
243	Ring Spanner 3/16 to 1\" 1Nos
244	Double end spanner set 3/16\" to 1\"1Nos
245	Pipe Wrench 18\" & 4\"2Nos
246	Screw drivers 6\", 10\" & 12\" 3Nos
247	Cutting Plier 12\" 1Nos
248	2 Kgs Hammer with Handle 1Nos
249	Nose Plier 1Nos
250	Flat and Half round smooth file2Nos
251	Adjustable Spanner 6\"1Nos
252	Column pipe Clamps 2Nos
253	Line Shaft Clamps1Nos
254	Line rope and clamps double the weight of pump 2Nos
255	Gland thghtening Spanner 1Nos
256	Spitter removing Spanner 1Nos
257	Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete0Nos
258	Fire extiguisher 3Kg capacity 2Nos
259	Rubber Mat 6\" x 4\" 2Nos
260	Fire Buckets with stand and three buckets 1Nos
261	Rubber Hand Gloves 1Nos
262	Danger Board Plates 4Nos
263	First aid kit with chart 1Nos
264	Shock Treatment Chart 1Nos
265	Portable rechargeble torch light1Nos
266	Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc;1Nos
267	Supply, delivery and erection of suitable capacity (Capacity of the Crane should be two times than the total weight of each pump unit) girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMBof standard make, including the required MS ISMC, MS angular iron,travelling trolley andchain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc.,1Nos
268	All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Boardand Cable trench etc Complete as directed by the Field Engineer1Job
269	Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection1Job
270	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
271	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
272	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
273	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
274	VFD (HD) for the same capacity of selected motor on the above with the specifications ofthe VFD shall be designed to operating temperature at 50 deg C.. ambient without deration, having facility to trip at Over temperature of VFD heat sink shall be above 115 deg C..,LCD keypadshould be built in display unit with graphical trend monitor, have life monitoring functions for devices like IGBT, Cooling fans and capacitors, communication protocol of profinetandadvanced open loop vector control1Nos
275	Suitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feeder1Nos
276	Suitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feeder 1Nos
277	Power transformer, required push buttons and MFM for each Main pump feeder1Nos
278	Laying of450 mm dia with - DI K9- Clear Water Pumping main from proposed WTP to proposed ELBR
279	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.
280	Filling with sand in foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
281	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete 450 mm dia DI K9
282	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
283	Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987
284	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.200mm dia 2.00m long DI DF pipes for scour
285	450mm dia 2.00m long DI DF pipes at intake well cum pump house
286	450mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2
287	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
288	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.200 mm dia
289	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.450 mm dia
290	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85450 mm dia
291	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85200 mm dia
292	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85150 mm dia
293	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S200mm Ø DI D/F valve - PN16 for scour
294	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S150mm Ø DI D/F valve - PN16 for Air valves and Air release valves
295	Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes andtransportation, etc complete ISI marked PN 1.6 (MPa)450mm Ø DI D/F valve - PN16
296	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S150mm dia. PN16
297	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure150mm dia. PN16
298	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.450 mm dia
299	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.450mm dia
300	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.200 mm dia
301	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.150 mm dia
302	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.150 mm dia
303	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.For Thrust Blocks
304	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20For Anchor Blocks
305	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
306	Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 450mm dia
307	Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 200 mm dia
308	Construction of RCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work
309	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete 450mm dia mm
310	Construction of Compound wall for WTP @Thamma varam
311	RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specificationsincluding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto
312	Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 da
313	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix unit 1.00cumfor footings
314	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix unit 1.00cumfor plinth beam.
315	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix unit 1.00cumfor columns
316	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix unit 1.00cumfor columns (gate pillars)
317	Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcementincluding cost of binding wire etc. complete for reinforcement- 1 kg
318	Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum
319	Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.
320	Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work
321	Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work
322	Supply delivery and erection of MS Railingincluding cost and conveyance of all materials and labour for erection etc., complete for finished item of work
323	Rising of WTP area with Gravel Filling
324	Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost,and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.
325	Providing CC Roads in WTP Site
326	Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B))
327	Compacting Original Ground - Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.
328	Granular sub-base/base/surface course with local materials (Table 400.2)Construction of granular sub-base by providing local material spreading in uniform layers withon prepared surface, mixing by mix in place methodat once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 GRADE -1 PRR RBR-SBBS-2 Page No 318
329	Granular sub-base/base/surface course with GSB Grading-II (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using crusher stone dust unit 1.00 cum
330	Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadem specification including cost, seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper of site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc, as directed by Engineer-in-Charge as per MORT&H specification. 406 (4th version) for finished item of work (Pavement based on levels for finished item of work) RBR -SBBS- II (B)
331	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type and grade as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work,125 micron thick polythene film,spreading the concrete with sholvels, rakes, compacted using needle, plate vibrators and finished in continuous operation with power trovellor including provision of contraction and expansion, construction joints, primer, sealant, and curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD.
332	Finishing of Cement Concrete pavement surface with Power Trovellor including all charges of T&P, all operational, Incidental and labour charges etc., complete for finished item of work
333	Supply,Delivery and placing of MS Dowel bars of S240 Gradeas per drawings and technical specification of 25 mm dia includingwastage, . This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental officer in-charge of the Work.
334	Supplying,fitting and placing HYSD bar reinforcement (FE 415) grade as per drawings and technical specification for bars below 36mm dia including over laps and wastage, where they are not welded. This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental technical higher authorities.
335	Providing CC Drain in WTP Site
336	Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helperunit HP hour
337	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484)By Mechanical means 70%
338	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484)By Manual means 30%
339	Filling Sandin foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH ( Page No. 488) RBR FN-DN-2
340	Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., (Page No.661) BLD-CSTN-2-5
341	RCC M-20 Design mixusing 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering for culvert bed blocks and slabsDrain bed
342	RCC M-20 Design mixusing 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering for culvert bed blocks and slabsDrain body walls
343	RCC M-30 Design mixusing 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering for culvert bed blocks and slabsbed
344	RCC M-30 Design mixusing 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering for culvert bed blocks and slabsbody walls
345	RCC M-30 Design mixusing 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excludingcentering, shuttering for culvert bed blocks and slabsculvert slab
346	Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (BLD-CSTN-2-18)
347	Clear Water Elevated Level Balancing Reservoir of 150 KL capacity with 30M staging at the Foot of the Thammavaram Hllock
348	Earthwork excavation by machinery and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars for pipeline trenchesand as per specification,drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches including all incidental and operational charges etc., complete. as followsOrdinery soils-Mechanical Means Upto 3 m depth
349	Earthwork excavation by machinery and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars for pipeline trenchesand as per specification,drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches including all incidental and operational charges etc., complete. as followsOrdinary rock (not requiring blasting) Manual meansupto 3.00m depth
350	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per SS and as directed by the departmental officer incharge of work.
351	Plain Cement Concrete (1:4:8)using 40mm graded metal (2/3 rd) & 20mm graded nominal size (1/3rd) HBG machine crushed metal (1 Cement : 4 Sand : 8 Coarse aggregate) including costand conveyance of all materials, seignorage charges, labour charges, mixing charges, consolidation, levelling, centering charges etc., complete. for bed concrete
352	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsRaft
353	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsBelow GL shaft side wall
354	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsRing beam over door
355	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows0 - 3 Mts for shaft
356	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows3 - 4 Mts
357	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows4 - 5 Mts
358	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows5 - 6 Mts
359	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows6-7 Mts
360	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows7-8 Mts
361	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows8-9 Mts
362	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows9-10 Mts
363	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows10-11 Mts
364	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows11-12 Mts
365	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows12-13mts
366	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows13-14mts
367	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows14-15mts
368	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows15-16mts
369	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows16-17mts
370	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows17-18mts
371	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows18-19mts
372	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows19-20mts
373	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows20-21mts
374	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows21-22mts
375	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows22-23mts
376	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows23-24mts
377	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows24-25mts
378	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows25-26mts
379	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows26-27mts
380	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows27-28mts
381	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows28-29mts
382	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as follows29-30mts
383	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsBottom dome
384	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsBottom ring beam
385	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsConical Side wall
386	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsTop ring Beam
387	Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and includingincluding all operational, incidental and labour charges such as , machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental chargesetc., complete.as per SS and as directed by the departmental officer incharge of work as followsTop Dome
388	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.Sas per ss and as directed by the departmental officer in charge of work for flooring
389	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all ,conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work. for Pump House
390	Supply and delivery and fixing in postion of MS spiral Ladder to the OHSR of Height 30m made with MS tubes,MS angles,MS squares etc including all fabrication and all fixing charges and other incidental charges power charges welding rod etc complete as per ss and as directed by the dept authorities
391	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying., including and other all materials etc., complete for finished item of work in all floors.( APSS No.126)
392	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Inlet DI pipes350 mm x 2.00m DIK9 D/F pipes
393	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Inlet DI pipes350mm x 1.00m DIK9 D/F pipes
394	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Outlet DI pipes400mm x 2.00m DIK9 D/F pipes
395	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Outlet DI pipes400mm x 1.00m DIK9 D/F pipes
396	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Overflow DI pipes400mm x 2.00m DIK9 D/F pipes
397	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating.Overflow DI pipes400mm x 1.00m DIK9 D/F pipes
398	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts statingScour DI pipes200mm x 2.00m DIK9 D/F pipes
399	Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts statingScour DI pipes200mm x 1.00m DIK9 D/F pipes
400	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) PN 1.6(Mpa)with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows
401	Inlet DI pipes
402	200mm dia Sluice valve PN 1.6
403	Outlet DI pipes
404	200mm dia Sluice valve PN 1.6
405	Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation andas per ss and as directed by the departmental officer incharge of work as follows
406	200mm dia DI D/F Duck foot bend
407	Supply and delivery of Bolts and Nuts with double washers excluding taxes and including conveyance etc., complete as per SS and as directed by the departmental officer incharge of work.
408	Supply and delivery of 6 mm thick Rubber Packing excluding taxes and including conveyance etc., complete ss per SS and as directed by the departmental officer incharge of work.
409	Supply, delivery and fixing of Water Levl Indicator, Name Board,Lighting Arrester other incidental item,Fly Proof Arrester etcas directed by the departmental officer incharge of work for 90 KL OHBR at 30 mtr staging
410	Laying of 600mm dia DI Clear Water Gravity Main from Prop.Balancing Reservoir at Thammavaram Village to Market Yard centre in Addanki.
411	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
412	RBR-FNDN-1- (IV) -Hard rock (blasting prohibited) -up to3.00Mts. below GL: Excavation in Hard Rock in habitant areas where conventional blasting can not be done for structures as per drawings and technical specifications including setting out, constru
413	Providing of compacted sand bed complying with specifications for spreading for pipeline works - 1 Cum
414	Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K7 suitable for push-onjoint (rubber gasket d jointin
415	600mm dia DI - K7
416	Lowering C.I. / D.I.Pipes (all classes) and specials (fittings)carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N
417	Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/
418	Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application. PN 1.6 (MPa)
419	600mm dia Butterfly valve
420	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.200mm dia Scour valve
421	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.150 mm dia Isolated valve for air valve
422	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes andtransportation.. PN 1.6 (MPa)150mm dia Air Valve
423	Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of vale in mm a) 600mm dia Sluice Valve
424	Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of vale in mm 200mm dia Scour valves
425	Labour Charges for jointing of DI Kinetic air valves with isolating sluice valves doubhle air valves / air cushion valve excluding cost of jointing materials such as boits nuts and rubber insertions etc completeFor 150mm dia air valve
426	Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete a) 600mm dia Sluice Valve
427	Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete 200mm dia Scour valves
428	Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc completeFor 150mm dia air valve
429	Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code
430	600mm dia Bends
431	Supply and placing of the M20 grade Concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., t
432	For Thrust Blocks
433	Construction ofR.C.C.valve chamber in M20 Grade concreteas per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its
434	600mm dia Sluice valve
435	200mm dia Scour valve
436	150mm dia Air valve
437	Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes
438	Bailing out water from the trenches with oil engine driven pumpsets, including hire charges and wages for Driver and Helper.
439	Clear water intermediate sump at Agriculture market yard
440	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--
441	upto 3m depth
442	3-6.00m depth
443	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
444	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
445	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer
446	Raft slab
447	For side walls circular 0.30m thick initial height 3.00 mbelow GL
448	For side walls circular 0.30m thick above GL
449	Columns0.30 x 0.30 ,
450	Roof beams
451	Roof slab0.15m thick 0.786*(13.10^2-6.00^2)
452	Roof dome slab 0.15m thick
453	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
454	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
455	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
456	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
457	Clear Water Pump House at Market Yard
458	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
459	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
460	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
461	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete
462	Column footings
463	Pedestals
464	Columns
465	Plinth beam3.50-0.30
466	Lintel beams
467	Roof Beams
468	Roof slab0.125m thick,
469	Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
470	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
471	Ground floor
472	1st floor Parapet wall2(15.90+8.6)=40.66
473	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
474	Ground floor
475	1st floor Parapet wall
476	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
477	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
478	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
479	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
480	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
481	Windows1.50x1.20m
482	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
483	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
484	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
485	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
486	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
487	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
488	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
489	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
490	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
491	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
492	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
493	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
494	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
495	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
496	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
497	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
498	Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
499	LAYING OFDI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE-1, ZONE-2,BOMMANAPADU,NAGULAPADU) (150mm dia/ 200mm/ 250mm dia)
500	Cutting open cement concrete road surface including depositing of excavated materials for water supply line trench work including labour charges and all incidental and operational charges etc., complete..
501	Cutting open bituminous tar road surface including depositingof excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete.
502	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
503	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - inOrdinary soil
504	Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum
505	Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum
506	Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing
507	150mm DI K9
508	200mm DI K9
509	250mm DI K9
510	300mm DI K9
511	Lowering C.I. / D.I.Pipes (all classes) and specials (fittings)carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N
512	150 mm DI K9
513	200 mm DI K9
514	250 mm DI K9
515	300 mm DI K9
516	Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/
517	150 mm DI K9
518	200 mm DI K9
519	250 mm DI K9
520	300 mm DI K9
521	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
522	Sluice Valves
523	150 mm
524	200 mm
525	250 mm
526	300 mm
527	100 mm dia isolating Sluice valves for Air Valves
528	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
529	Scour Valves
530	150mm dia
531	Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves.Dia of Valve in mm. including vat. PHE - CISV - 15
532	150 mm
533	200 mm
534	250 mm
535	300 mm
536	100 mm dia isolating Sluice valves for Air Valves
537	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.
538	150mm dia 2.00 m long
539	200 mm DI DF Pipes 1 m Long
540	250 mm DI DF Pipes 1 m Long
541	300 mm DI DF Pipes 1 m Long
542	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
543	150mm dia 2.00 m long
544	200 mm DI DF Pipes 1 m Long
545	250 mm DI DF Pipes 1 m Long
546	300 mm DI DF Pipes 1 m Long
547	for Tees
548	For scour tees
549	150mm dia
550	For Air tees 100 mm dia
551	Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with waterwith a water lead upto 500m and testing to required pressure complete.
552	150 mm
553	200 mm
554	250 mm
555	300 mm
556	100 mm dia isolating Sluice valves for Air Valves
557	100mm dia
558	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes andtransportation.. PN 1.6 (MPa).
559	100mm dia
560	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm
561	100mm dia
562	Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings
563	Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code
564	All Flanged Tee & tapers upto 500x500mm
565	Bends above 300mm dia
566	Bends upto 300mm dia
567	RCC (M 20) Nominal Mix:using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.
568	For Thrust Blocks
569	Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes
570	Construction ofR.C.C.valve chamber in M20 Grade concreteas per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &
571	150 mm
572	200 mm
573	250 mm
574	300 mm
575	100mm dia Air valve chamber
576	PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed
577	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. (CC pavement)
578	LAYING OFDI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE5, ZONE6 and Velamuripadu) (150mm dia/ 200mm/ 250mm dia)
579	Cutting open bituminous tar road surface including depositingof excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete.
580	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
581	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - inOrdinary soil
582	Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum
583	Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum
584	Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing
585	150 mm Dia K9
586	200 mm Dia K9
587	250 mm Dia K9
588	Lowering C.I. / D.I.Pipes (all classes) and specials (fittings)carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N
589	150 mm dia
590	200 mm Dia
591	250 mm Dia
592	Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/
593	150 mm dia
594	200 mm Dia
595	250 mm Dia
596	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
597	Sluice Valves
598	150 mm Dia
599	200 mm Dia
600	100 mm dia isolating Sluice valves for Air Valves
601	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
602	Scour Valves
603	150mm dia
604	Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves.Dia of Valve in mm. including vat. PHE - CISV - 15
605	150 mm Dia Sluice Valve
606	200 mm Dia Sluice Valve
607	250 mm Dia Sluice Valve
608	100 mm dia isolating Sluice valves for Air Valves
609	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.
610	150mm dia 2.00 m long
611	DIDF 1.00m long pipes for sluice and non return valves
612	200 mm Dia
613	250 mm Dia
614	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
615	150mm dia 2.00 m long
616	200 mm dia
617	250 mm dia
618	for Tees
619	For scour tees
620	150mm dia
621	For Air tees 100 mm dia
622	Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with waterwith a water lead upto 500m and testing to required pressure complete.
623	150 mm Dia
624	200 mm Dia
625	250 mm Dia
626	100 mm dia isolating Sluice valves for Air Valves
627	100mm dia
628	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes andtransportation.. PN 1.6 (MPa).
629	100mm dia
630	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm
631	100mm dia
632	Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings
633	Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code
634	All Flanged Tee & tapers upto 500x500mm
635	RCC (M 20) Nominal Mix:using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.
636	For Thrust Blocks
637	Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes
638	Construction ofR.C.C.valve chamber in M20 Grade concreteas per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &
639	150mm Dia
640	200 mm Dia
641	250 mm Dia
642	100mm dia Air valve chamber
643	PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed
644	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. (CC pavement)
645	LAYING OFDI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE3, ZONE4) (300mm/ 350mm dia)
646	Cutting open cement concrete road surface including depositing of excavated materials for water supply line trench work including labour charges and all incidental and operational charges etc., complete..
647	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
648	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - inOrdinary soil
649	Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum
650	Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum
651	Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing
652	300 mm Dia K9
653	350 mm Dia K9
654	Lowering C.I. / D.I.Pipes (all classes) and specials (fittings)carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N
655	300 mm Dia K9
656	350 mm Dia K9
657	Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/
658	300 mm Dia K9
659	350 mm Dia K9
660	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
661	Sluice Valves
662	150 mm Dia
663	200 mm Dia
664	300 mm Dia
665	350 mm Dia
666	100 mm dia isolating Sluice valves for Air Valves
667	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.
668	Scour Valves
669	150mm dia
670	Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves.Dia of Valve in mm. including vat. PHE - CISV - 15
671	150 mm Dia
672	200 mm Dia
673	250 mm Dia
674	300 mm Dia
675	350 mm Dia
676	100 mm dia isolating Sluice valves for Air Valves
677	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.
678	150mm dia 2.00 m long
679	DIDF 1.00m long pipes for sluice and non return valves
680	200mm Dia
681	250 mm Dia
682	300 mm Dia
683	350 mm Dia
684	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
685	150mm dia 2.00 m long
686	200 mm Dia
687	250 mm Dia
688	300 mm Dia
689	350 mm Dia
690	for Tees
691	For scour tees
692	150mm dia
693	For Air tees 100 mm dia
694	Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with waterwith a water lead upto 500m and testing to required pressure complete.
695	150 mm Dia
696	200 mm Dia
697	250 mm Dia
698	300 mm Dia
699	350 mm Dia
700	100 mm dia isolating Sluice valves for Air Valves
701	100mm dia
702	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes andtransportation.. PN 1.6 (MPa).
703	100mm dia
704	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm
705	100mm dia
706	Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings
707	Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code
708	All Flanged Tee & tapers upto 500x500mm
709	RCC (M 20) Nominal Mix:using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.
710	For Thrust Blocks
711	Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes
712	Construction ofR.C.C.valve chamber in M20 Grade concreteas per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &
713	150 mm Dia
714	200 mm Dia
715	250 mm Dia
716	300 mm Dia
717	350 mm Dia
718	100mm dia Air valve chamber
719	PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed
720	Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
721	Construction of 500KL ELSR with 18 M Staging in Zone -1 near NTR nagar
722	Design and Construction of 500 KL Capacity M30 Grade desing mix VRCC ELSR 18.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 in Zone 1 near NTR Nagar
723	Construction of 500 KLELSR with 18 m stagingat Bommanapadu
724	Design and Construction of 500 KL Capacity M30 Grade desing mix VRCC ELSR 18.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Bommanapadu
725	Construction of 300 KLELSR with 15m stagingat Velamuripadu
726	Design and Construction of 300 KL Capacity M30 Grade desing mix VRCC ELSR 15.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Velamuripadu
727	Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.
728	Inlet Arrangements
729	250mm Dia
730	250x2.00m long DI DF pipes
731	250x1.00m long DI DF pipes
732	Outlet Arrangements
733	250x2.00m long DI DF pipes
734	250x1.00m long DI DF pipes
735	Over flow 150mm
736	200x2.00m long DI DF pipes
737	200x1.00m long DI DF pipes
738	Scour 100mm
739	150x2.00m long DI DF pipes
740	150x1.00m long DI DF pipes
741	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 250mm DI DF pipes
742	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 200mm DI DF pipes
743	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 150mm DI DF pipes
744	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
745	250mm dia
746	200mm dia
747	150mm dia
748	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass250mm dia
749	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass Scour 150mm dia
750	Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.
751	Incoming 250mm dia
752	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 250mm dia
753	Scour 150mm dia
754	Construction of Sluice Valve chambers with RCC M20 nominal mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. 250mm dia
755	Scour 150mm dia
756	Construction of 300 KLELSR with 15m stagingat Nagulapadu
757	Design and Construction of 300 KL Capacity M30 Grade desing mix VRCC ELSR 15.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Nagulapadu
758	Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.
759	Inlet Arrangements
760	250mm Dia
761	250x2.00m long DI DF pipes
762	250x1.00m long DI DF pipes
763	Outlet Arrangements
764	250x2.00m long DI DF pipes
765	250x1.00m long DI DF pipes
766	Over flow 150mm
767	200x2.00m long DI DF pipes
768	200x1.00m long DI DF pipes
769	Scour 100mm
770	150x2.00m long DI DF pipes
771	150x1.00m long DI DF pipes
772	250 Duck foot bends for incoming and outgoing & over flow
773	for scour 150 duck foot bend
774	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. (Upto 500mm dia)
775	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.250mm Dia
776	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.200mm Dia
777	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.150mm Dia
778	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
779	250mm dia
780	200mm dia
781	150mm dia
782	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass200mm dia
783	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass 150mm dia
784	Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.250mm dia
785	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.250mm dia
786	Scour 150mm dia
787	Construction of Sluice Valve chambers with RCC M20 nominal mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. 250mm dia
788	Scour 150mm dia
789	Construction of Compound wall for 1400 KL ELSR - Jr College
790	RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specificationsincluding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings,by manual means,
791	Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,
792	Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete- 1 cum for Bed
793	Supply and placing of the Design Mix Concrete RCC M25 Gradecorresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
794	Footings
795	Columns
796	Below GL
797	Aove GL
798	Below GL
799	Aove GL
800	Plinth Beam
801	Tie Beam
802	Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum
803	Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.
804	Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work
805	Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work
806	Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the ulleystoguideandfixedwith locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105 (BMT-F.30)
807	Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss
808	FixingMS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall
809	BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
810	Suply of HYSD Fe 500 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcementincluding cost of binding wire etc. complete for reinforcement- 1 kg
811	Construction of Compound wall for 1200 KL ELSR - NSP Office
812	RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specificationsincluding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings,by manual means,
813	Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,
814	Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete- 1 cum for Bed
815	Supply and placing of the Design Mix Concrete RCC M20 Gradecorresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
816	Footings
817	Columns
818	Below GL
819	Aove GL
820	Below GL
821	Aove GL
822	Plinth Beam
823	Tie Beam
824	Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum
825	Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.
826	Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work
827	Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work
828	Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleystoguideandfixedwith locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105
829	Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss
830	FixingMS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall
831	BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
832	Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcementincluding cost of binding wire etc. complete for reinforcement- 1 kg
833	Construction of Compound wall for 900 KL ELSR - Market Yard
834	RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specificationsincluding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings,by manual means,
835	Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,
836	Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete- 1 cum for Bed
837	Supply and placing of the Design Mix Concrete RCC M20 Gradecorresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
838	Footings
839	Columns
840	Below GL
841	Aove GL
842	Below GL
843	Aove GL
844	Plinth Beam
845	Tie Beam
846	Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum
847	Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.
848	Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work
849	Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work
850	Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleystoguideandfixedwith locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105
851	Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss
852	FixingMS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall
853	BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
854	Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcementincluding cost of binding wire etc. complete for reinforcement- 1 kg
855	Construction of Watchman Quarters Single type at 1400 KL ELSR - Jr College
856	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
857	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
858	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
859	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
860	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
861	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
862	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
863	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
864	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
865	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
866	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
867	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
868	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
869	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
870	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
871	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
872	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
873	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
874	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
875	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
876	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
877	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
878	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
879	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
880	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
881	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
882	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
883	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
884	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
885	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
886	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
887	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
888	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
889	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
890	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
891	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
892	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
893	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
894	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
895	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
896	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
897	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
898	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
899	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
900	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
901	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
902	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
903	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
904	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
905	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
906	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
907	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
908	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
909	S& F GI union Ist Quality 12.70mm
910	S& F GI union Ist Quality 19.05mm
911	S& F GI union Ist Quality 25.40mm
912	Watchman Quarters
913	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
914	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
915	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
916	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
917	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
918	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
919	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
920	Construction of Watchman Quarters Single type at 1200 KL ELSR - NSP Office
921	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
922	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
923	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
924	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
925	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
926	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
927	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
928	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
929	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
930	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
931	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
932	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
933	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
934	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
935	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
936	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
937	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
938	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
939	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
940	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
941	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
942	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
943	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
944	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
945	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
946	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
947	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
948	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
949	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
950	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
951	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
952	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
953	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
954	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
955	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
956	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
957	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
958	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
959	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
960	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
961	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
962	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
963	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
964	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
965	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
966	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
967	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
968	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
969	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
970	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
971	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
972	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
973	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
974	S& F GI union Ist Quality 12.70mm
975	S& F GI union Ist Quality 19.05mm
976	S& F GI union Ist Quality 25.40mm
977	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
978	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
979	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
980	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
981	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
982	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
983	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
984	Construction of Watchman Quarters Single type at 900 KL ELSR - Market Yard
985	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
986	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
987	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
988	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
989	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
990	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
991	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
992	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
993	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
994	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
995	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
996	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
997	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
998	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
999	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
1000	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
1001	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
1002	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
1003	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
1004	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
1005	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
1006	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
1007	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
1008	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1009	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
1010	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
1011	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
1012	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
1013	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
1014	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
1015	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
1016	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
1017	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
1018	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
1019	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
1020	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1021	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
1022	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
1023	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
1024	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
1025	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1026	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
1027	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
1028	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
1029	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
1030	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
1031	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
1032	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
1033	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
1034	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
1035	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
1036	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
1037	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
1038	S& F GI union Ist Quality 12.70mm
1039	S& F GI union Ist Quality 19.05mm
1040	S& F GI union Ist Quality 25.40mm
1041	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
1042	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
1043	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1044	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
1045	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
1046	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
1047	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1048	Construction of Office cum Stores at WTP
1049	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
1050	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
1051	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1052	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
1053	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
1054	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
1055	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
1056	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
1057	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
1058	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
1059	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
1060	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
1061	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
1062	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
1063	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
1064	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
1065	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
1066	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
1067	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
1068	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
1069	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
1070	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
1071	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
1072	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1073	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
1074	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
1075	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
1076	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
1077	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
1078	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
1079	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
1080	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
1081	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
1082	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
1083	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
1084	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1085	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
1086	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
1087	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
1088	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
1089	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1090	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
1091	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
1092	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
1093	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
1094	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
1095	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
1096	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
1097	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
1098	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
1099	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
1100	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
1101	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
1102	S& F GI union Ist Quality 12.70mm
1103	S& F GI union Ist Quality 19.05mm
1104	S& F GI union Ist Quality 25.40mm
1105	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
1106	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
1107	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1108	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
1109	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
1110	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
1111	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1112	Construction of Watchman Quarters Single type at WTP
1113	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
1114	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
1115	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1116	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
1117	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
1118	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
1119	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
1120	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
1121	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
1122	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
1123	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
1124	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
1125	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
1126	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
1127	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
1128	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
1129	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
1130	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
1131	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
1132	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
1133	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
1134	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
1135	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
1136	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1137	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
1138	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
1139	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
1140	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
1141	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
1142	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
1143	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
1144	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
1145	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
1146	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
1147	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
1148	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1149	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
1150	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
1151	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
1152	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
1153	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1154	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
1155	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
1156	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
1157	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
1158	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
1159	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
1160	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
1161	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
1162	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
1163	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
1164	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
1165	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
1166	S& F GI union Ist Quality 12.70mm
1167	S& F GI union Ist Quality 19.05mm
1168	S& F GI union Ist Quality 25.40mm
1169	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
1170	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
1171	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1172	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
1173	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
1174	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
1175	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1176	Construction of Staff Quarters at Intakewell
1177	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
1178	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
1179	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1180	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
1181	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
1182	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
1183	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
1184	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
1185	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
1186	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
1187	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
1188	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
1189	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
1190	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
1191	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
1192	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
1193	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
1194	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
1195	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
1196	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
1197	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
1198	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
1199	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
1200	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1201	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
1202	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
1203	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
1204	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
1205	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
1206	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
1207	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
1208	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
1209	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
1210	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
1211	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
1212	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1213	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
1214	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
1215	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
1216	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
1217	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1218	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
1219	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
1220	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
1221	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
1222	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
1223	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
1224	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
1225	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
1226	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
1227	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
1228	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
1229	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
1230	S& F GI union Ist Quality 12.70mm
1231	S& F GI union Ist Quality 19.05mm
1232	S& F GI union Ist Quality 25.40mm
1233	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
1234	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
1235	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1236	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
1237	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
1238	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
1239	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1240	Providing Transformer of 250 KVA Capacity at Intake well
1241	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
1242	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
1243	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
1244	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
1245	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
1246	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
1247	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
1248	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
1249	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
1250	A) Earth Electrodes
1251	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
1252	C) Epoxy insulators
1253	D) No.\"8\" SWG Copper wire. MAT 04141
1254	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04044c 250KVA
1255	1. Quantity : 1
1256	2. Rated KVA :250 KVA
1257	3. Service & Location: Continuous Outdoor Distribution Transformer
1258	4. Mounting : Plinth.
1259	5. Wound : CopperDouble wound
1260	6. Type :Core type oil immersed
1261	7. Cooling : ONAN
1262	8. TempRise : 40⁰C in oil 45⁰C by resistance
1263	9. Vector Group:Dyn 11
1264	10. Primary Connection :Delta
1265	11. Nominal Voltage / Current : ______
1266	12. Highest system Voltage: 12000V
1267	13. Primary Frequency :50 HZ +/- 3%
1268	14. Number of Phases : 3
1269	15. Primary wires:3
1270	16. Secondary connection : Star
1271	17. SecondaryVolts / Current :433V
1272	18. Secondary phases :3
1273	19. Secondary wires:4
1274	20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps)
1275	21. Terminal arrangement.
1276	a.HV: HT terminal box as per the site condition.
1277	b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable
1278	22. LV:One separate terminal for earthing.
1279	23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats
1280	24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats
1281	25. Percentage Impedance at 75 deg C AT 4.5
1282	26. No load Current Less than 2% of full load Current
1283	27. Standrad Fittings & Accessories.
1284	a. Rating and terminal marking plate: One
1285	b. Lifting Lugs:Two
1286	c. Off-circuit tap switch :One
1287	d. EarthingTerminals :Two
1288	e. Radiators ( Attachable):Adequate
1289	f.Explosion vent with Diaphragm :One
1290	g. Conservator with Drain plug:one
1291	h. Oil filling hole with cap :One
1292	i.Oil level indicator : One
1293	j.Dehydrating Silicagel Breather : One
1294	k. Terminal Arrangement: HV With Treminal Box
1295	l. Terminal Arrangement : LV Cable Box
1296	m. Separate Neutral Bushing: One
1297	n. Filter valve with blanking plate : One
1298	o. Drain cum filter valve with blanking plate : One
1299	p. Air release device : One
1300	q. Thermometer Pocket : One
1301	r. Four :Unidirectional flat rollers
1302	s. One :10Cm dial thermometer(Rigid stem type)
1303	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
1304	LT panel
1305	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
1306	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
1307	Incoming
1308	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1309	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1310	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
1311	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
1312	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
1313	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
1314	g).3RYB Phase indication lamps with leds
1315	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
1316	Out-Going
1317	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1318	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1319	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1320	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1321	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1322	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1323	.KWH digital meter fro lighting section
1324	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
1325	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
1326	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
1327	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
1328	Supply and Laying of 3C X50Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b
1329	Transformer yard
1330	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means - Ordinary Soil - up to 3m depth.
1331	Collecton, Supply and filling with Sand complying with standard specifications including cost and conveyance of Sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.
1332	Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profitcomplete for finished item of work.
1333	Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs/cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually,laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work.
1334	Column footings
1335	Columns1.20-0.10-0.10-0.30+1.80
1336	Plinth beam2(15+12)=54-gate3.00=51.00
1337	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.
1338	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe-500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1339	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
1340	Manufacture, Supply, delivery of MS grill gates, window ornamental safety grill, made with MS flats, MS angles, MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
1341	Painting two coats with Synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
1342	Supply and filling with Aggregates 40 mm nominal size complying with standard specifications including cost and conveyance of Aggregates 40 mm nominal size to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.
1343	Errection of 315 KVA transformer at WTP with Transformer yard 15.00x12.00m
1344	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
1345	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
1346	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
1347	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
1348	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
1349	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
1350	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
1351	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
1352	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
1353	A) Earth Electrodes
1354	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
1355	C) Epoxy insulators
1356	D) No.\"8\" SWG Copper wire. MAT 04141
1357	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04045D315 KVA
1358	1. Quantity : 1
1359	2. Rated KVA :315 KVA
1360	3. Service & Location: Continuous Outdoor Distribution Transformer
1361	4. Mounting : Plinth.
1362	5. Wound : CopperDouble wound
1363	6. Type :Core type oil immersed
1364	7. Cooling : ONAN
1365	8. TempRise : 40⁰C in oil 45⁰C by resistance
1366	9. Vector Group:Dyn 11
1367	10. Primary Connection :Delta
1368	11. Nominal Voltage / Current : ______
1369	12. Highest system Voltage: 12000V
1370	13. Primary Frequency :50 HZ +/- 3%
1371	14. Number of Phases : 3
1372	15. Primary wires:3
1373	16. Secondary connection : Star
1374	17. SecondaryVolts / Current :433V
1375	18. Secondary phases :3
1376	19. Secondary wires:4
1377	20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps)
1378	21. Terminal arrangement.
1379	a.HV: HT terminal box as per the site condition.
1380	b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable
1381	22. LV:One separate terminal for earthing.
1382	23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats
1383	24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats
1384	25. Percentage Impedance at 75 deg C AT 4.5
1385	26. No load Current Less than 2% of full load Current
1386	27. Standrad Fittings & Accessories.
1387	a. Rating and terminal marking plate: One
1388	b. Lifting Lugs:Two
1389	c. Off-circuit tap switch :One
1390	d. EarthingTerminals :Two
1391	e. Radiators ( Attachable):Adequate
1392	f.Explosion vent with Diaphragm :One
1393	g. Conservator with Drain plug:one
1394	h. Oil filling hole with cap :One
1395	i.Oil level indicator : One
1396	j.Dehydrating Silicagel Breather : One
1397	k. Terminal Arrangement: HV With Treminal Box
1398	l. Terminal Arrangement : LV Cable Box
1399	m. Separate Neutral Bushing: One
1400	n. Filter valve with blanking plate : One
1401	o. Drain cum filter valve with blanking plate : One
1402	p. Air release device : One
1403	q. Thermometer Pocket : One
1404	r. Four :Unidirectional flat rollers
1405	s. One :10Cm dial thermometer(Rigid stem type)
1406	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
1407	LT panel
1408	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
1409	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
1410	Incoming
1411	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1412	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1413	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
1414	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
1415	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
1416	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
1417	g).3RYB Phase indication lamps with leds
1418	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
1419	Out-Going
1420	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1421	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1422	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1423	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1424	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1425	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1426	.KWH digital meter fro lighting section
1427	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
1428	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
1429	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
1430	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
1431	Supply and Laying of 3C X 70Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458
1432	Transformer yard
1433	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
1434	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
1435	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1436	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete
1437	column footings
1438	Columns1.20-0.10-0.10-0.30+1.80
1439	Plinth beam2(15+12)=54-gate3.00=51.00
1440	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
1441	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
1442	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
1443	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
1444	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
1445	supply and filling the transformer yard with 40mm HBG metal m/c
1446	Providing Transformer of 100 KVA Capacity at Clear Water Intermediarte Sump at Market yard
1447	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
1448	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
1449	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
1450	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
1451	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
1452	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
1453	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
1454	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
1455	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
1456	A) Earth Electrodes
1457	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
1458	C) Epoxy insulators
1459	D) No.\"8\" SWG Copper wire. MAT 04141
1460	Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.Makes : As per list of recommended brands as category I. MAT-04042 a100KVA
1461	1. Quantity : 1
1462	2. Rated KVA :100 KVA
1463	3. Service & Location: Continuous Outdoor Distribution Transformer
1464	4. Mounting : Plinth.
1465	5. Wound : CopperDouble wound
1466	6. Type :Core type oil immersed
1467	7. Cooling : ONAN
1468	8. TempRise : 40⁰C in oil 45⁰C by resistance
1469	9. Vector Group:Dyn 11
1470	10. Primary Connection :Delta
1471	11. Nominal Voltage / Current : ______
1472	12. Highest system Voltage: 12000V
1473	13. Primary Frequency :50 HZ +/- 3%
1474	14. Number of Phases : 3
1475	15. Primary wires:3
1476	16. Secondary connection : Star
1477	17. SecondaryVolts / Current :433V
1478	18. Secondary phases :3
1479	19. Secondary wires:4
1480	20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps)
1481	21. Terminal arrangement.
1482	a.HV: HT terminal box as per the site condition.
1483	b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable
1484	22. LV:One separate terminal for earthing.
1485	23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats
1486	24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats
1487	25. Percentage Impedance at 75 deg C AT 4.5
1488	26. No load Current Less than 2% of full load Current
1489	27. Standrad Fittings & Accessories.
1490	a. Rating and terminal marking plate: One
1491	b. Lifting Lugs:Two
1492	c. Off-circuit tap switch :One
1493	d. EarthingTerminals :Two
1494	e. Radiators ( Attachable):Adequate
1495	f.Explosion vent with Diaphragm :One
1496	g. Conservator with Drain plug:one
1497	h. Oil filling hole with cap :One
1498	i.Oil level indicator : One
1499	j.Dehydrating Silicagel Breather : One
1500	k. Terminal Arrangement: HV With Treminal Box
1501	l. Terminal Arrangement : LV Cable Box
1502	m. Separate Neutral Bushing: One
1503	n. Filter valve with blanking plate : One
1504	o. Drain cum filter valve with blanking plate : One
1505	p. Air release device : One
1506	q. Thermometer Pocket : One
1507	r. Four :Unidirectional flat rollers
1508	s. One :10Cm dial thermometer(Rigid stem type)
1509	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
1510	LT panel
1511	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
1512	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
1513	Incoming
1514	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1515	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1516	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
1517	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
1518	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
1519	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
1520	g).3RYB Phase indication lamps with leds
1521	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
1522	Out-Going
1523	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1524	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1525	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1526	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1527	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1528	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1529	.KWH digital meter fro lighting section
1530	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
1531	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
1532	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
1533	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
1534	Supply and Laying of 3C X 35Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456
1535	Transformer yard
1536	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means - Ordinary Soil - up to 3m depth.
1537	Collecton, Supply and filling with Sand complying with standard specifications including cost and conveyance of Sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.
1538	Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm sizehard, machine crushedgranite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profitcomplete for finished item of work.
1539	Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs/cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually,laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work.
1540	Column footings
1541	Columns1.20-0.10-0.10-0.30+1.80
1542	Plinth beam2(15+12)=54-gate3.00=51.00
1543	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.
1544	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe-500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
1545	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
1546	Manufacture, Supply, delivery of MS grill gates, window ornamental safety grill, made with MS flats, MS angles, MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
1547	Painting two coats with Synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
1548	Supply and filling with Aggregates 40 mm nominal size complying with standard specifications including cost and conveyance of Aggregates 40 mm nominal size to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.
1549	Providing Transformer of 100 KVA Capacity at Intake Well
1550	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
1551	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
1552	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
1553	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
1554	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
1555	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
1556	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
1557	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
1558	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
1559	A) Earth Electrodes
1560	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
1561	C) Epoxy insulators
1562	D) No.\"8\" SWG Copper wire. MAT 04141
1563	Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.Makes : As per list of recommended brands as category I. MAT-04042 a100KVA
1564	1. Quantity : 1
1565	2. Rated KVA :100 KVA
1566	3. Service & Location: Continuous Outdoor Distribution Transformer
1567	4. Mounting : Plinth.
1568	5. Wound : CopperDouble wound
1569	6. Type :Core type oil immersed
1570	7. Cooling : ONAN
1571	8. TempRise : 40⁰C in oil 45⁰C by resistance
1572	9. Vector Group:Dyn 11
1573	10. Primary Connection :Delta
1574	11. Nominal Voltage / Current : ______
1575	12. Highest system Voltage: 12000V
1576	13. Primary Frequency :50 HZ +/- 3%
1577	14. Number of Phases : 3
1578	15. Primary wires:3
1579	16. Secondary connection : Star
1580	17. SecondaryVolts / Current :433V
1581	18. Secondary phases :3
1582	19. Secondary wires:4
1583	20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps)
1584	21. Terminal arrangement.
1585	a.HV: HT terminal box as per the site condition.
1586	b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable
1587	22. LV:One separate terminal for earthing.
1588	23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats
1589	24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats
1590	25. Percentage Impedance at 75 deg C AT 4.5
1591	26. No load Current Less than 2% of full load Current
1592	27. Standrad Fittings & Accessories.
1593	a. Rating and terminal marking plate: One
1594	b. Lifting Lugs:Two
1595	c. Off-circuit tap switch :One
1596	d. EarthingTerminals :Two
1597	e. Radiators ( Attachable):Adequate
1598	f.Explosion vent with Diaphragm :One
1599	g. Conservator with Drain plug:one
1600	h. Oil filling hole with cap :One
1601	i.Oil level indicator : One
1602	j.Dehydrating Silicagel Breather : One
1603	k. Terminal Arrangement: HV With Treminal Box
1604	l. Terminal Arrangement : LV Cable Box
1605	m. Separate Neutral Bushing: One
1606	n. Filter valve with blanking plate : One
1607	o. Drain cum filter valve with blanking plate : One
1608	p. Air release device : One
1609	q. Thermometer Pocket : One
1610	r. Four :Unidirectional flat rollers
1611	s. One :10Cm dial thermometer(Rigid stem type)
1612	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
1613	LT panel
1614	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
1615	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
1616	Incoming
1617	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1618	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1619	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
1620	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
1621	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
1622	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
1623	g).3RYB Phase indication lamps with leds
1624	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
1625	Out-Going
1626	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1627	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1628	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1629	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1630	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
1631	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
1632	.KWH digital meter fro lighting section
1633	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
1634	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
1635	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
1636	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
1637	Supply and Laying of 3C X 35Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456
1638	Transformer yard at Intake well
1639	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
1640	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
1641	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
1642	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete
1643	column footings
1644	Columns
1645	Plinth beam
1646	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.
1647	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
1648	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
1649	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
1650	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
1651	supply and filling the transformer yard with 40mm HBG metal m/c
1652	NH/R&B/Railway crossings by Trenchless Technology
1653	Railway crossing/road crossings/canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydraulic pipe jacking technique complete including tunneling excavation drive and receive pits , excavation and all machines transportation charges and other required materials but excluding cost of encasing pipe
1654	800mm dia CWM towards Kakanipalem ELSR @ Rama nagar junction.
1655	CWM to 500 KL ELSR Zone-1 near NTR Colony
1656	CWM to 250 KL ELSR @ Nagulapadu
1657	Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, but including taxes & duties, etc. unit 1.00 Rmt -SOR Rate
1658	800MM DIA
1659	Cost of Laying, Jointing, Hydrostatic filed test pressure, including cost of site welding, jointing materials and cost of transportation of water including emptying pipe line after completion of filed testingunit 1.00 Rmt .SOR Rate
1660	800MM DIA
1661	Providing Service Road to Intakewell to WTP at Thammavram Hillock & Head Water Works to ELBR
1662	Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B))
1663	Compacting Original Ground - Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.
1664	Granular sub-base/base/surface course with local materials (Table 400.2)Construction of granular sub-base by providing local material spreading in uniform layers withon prepared surface, mixing by mix in place methodat once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 GRADE -1 PRR RBR-SBBS-2 Page No 318
1665	Granular sub-base/base/surface course with GSB Grading-II (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using crusher stone dust unit 1.00 cum
1666	Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadem specification including cost, seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper of site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc, as directed by Engineer-in-Charge as per MORT&H specification. 406 (4th version) for finished item of work (Pavement based on levels for finished item of work) RBR -SBBS- II (B)
1667	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type and grade as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work,125 micron thick polythene film,spreading the concrete with sholvels, rakes, compacted using needle, plate vibrators and finished in continuous operation with power trovellor including provision of contraction and expansion, construction joints, primer, sealant, and curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD.
1668	Finishing of Cement Concrete pavement surface with Power Trovellor including all charges of T&P, all operational, Incidental and labour charges etc., complete for finished item of work
1669	Supply,Delivery and placing of MS Dowel bars of S240 Gradeas per drawings and technical specification of 25 mm dia includingwastage, . This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental officer in-charge of the Work.
1670	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
1671	For Raw Water Pumping Station as per the above specification
1672	For Clear WaterPumping Station - 1 as per the above specification
1673	For Clear WaterPumping Station - 2 as per the above specification
1674	For Clear Water Pumping Station-3as per the above specification
1675	For Clear Water Pumping Station - 4as per the above specification
1676	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1677	For Raw Water Pumping Station as per the above specification
1678	For Clear Water Pumping Station - 1 as per the above specification
1679	For Clear Water 150KL ELBR
1680	For Clear Water SUMP Inlet
1681	For Clear Water Pumping Station - 2 as per the above specification
1682	For Clear Water Pumping Station - 3 as per the above specification
1683	For Clear Water Pumping Station - 4 as per the above specification
1684	Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties
1685	For Clear Water Pumping Station - 1 as per the above specification
1686	For Clear Water Pumping Station - 2 as per the above specification
1687	For Clear Water Pumping Station - 3 as per the above specification
1688	For Clear Water Pumping Station - 4 as per the above specification
1689	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
1690	DN 200 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification
1691	DN 200 - PN 16 pump control valve for Clear Water Pumping Station-1 as per the above specification
1692	DN 200 - PN 16 pump control valve for Clear Water Pumping Station-4 as per the above specification
1693	DN 150 - PN 16 pump control valve for Clear Water Pumping Station -2 as per the above specification
1694	DN 400 - PN 16 pump control valve for Clear Water Pumping Station-3 as per the above specification
1695	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
1696	200MM Dia Above Specification.
1697	Outlet of Clear Water Pumping main at Pumping station-2
1698	250MM Dia Above Specification.
1699	Outlet of Clear Water Pumping main at Pumping station-4
1700	300MM Dia Above Specification.
1701	Proposed SUMP Inlet
1702	Outlet of Clear Water Pumping main at Pumping station-3
1703	400MM Dia Above Specification.
1704	Outlet of Clear Water Pumping main at Pumping station-1
1705	outlet of Raw Water Pumping Station at Gundlakamma Balancing reservior
1706	Inlet of Raw Water main at WTP
1707	Proposed 150KL ELBR
1708	Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1709	Raw Water Inlet of Water Treatment plant
1710	Clear Water outlet of Water Treatment plant
1711	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1712	Raw Water Inlet of Water Treatment plant
1713	Clear Water outlet of Water Treatment plant
1714	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1715	Raw Water Inlet of Water Treatment plant
1716	Clear Water outlet of Water Treatment plant
1717	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1718	Clear Water outlet-1 of Water Treatment plant
1719	Clear Water outlet-2 of Water Treatment plant
1720	Clear Water outlet-3 of Water Treatment plant
1721	Clear Water outlet-4 of Water Treatment plant
1722	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1723	Raw Water Inlet of Water Treatment plant
1724	Clear Water outlet of Water Treatment plant
1725	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
1726	Raw Water inlet and clear water outlet at WTP
1727	Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.
1728	For Raw Water Pumping Station as per the above specification
1729	For Clear Water Pumping Station as per the above specification
1730	Logic for RTU opeartaions:1. RTU panel for local operaion of the pumps in manual and Auto Mode.2. All the equipment like Pumps, PCC, MCC, VFD Control panels, Pump Control Valves, Vaccume Valve, Pressure and flow sensors connected to RTU through the cabling with necessary power and communication cables.3. The pumps can be opearte in Auto mode by the pumping sequence including monitor and opearte the Vacumization, SumpLevels, Suction, Delivery pressures, Pump Monitoting and PCV operating according to site conditions. 4. In Auto management, the pumps can be operate based on the field demand through control the VFD panels according to pump curves.5. Monitoring the suction and delivery pressures of the pumps and operate under limits assigned.6. Check all the reservoir demands and switch on and switch off the pumps according to demand under limits of pump curves.7. In manual opeartion, all the equiment can be run through PLC panel by individual operations.8.The RTU connected with SCADA for remote monitoring and operation.9. The RTU have a adequated facility to modify any sequence at any time demanded by the department incharge.
1731	Reservoir Inlet Management ::
1732	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.
1733	100MM Dia Above Specification.
1734	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1735	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1736	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1737	150 MM Dia Above Specification.
1738	Inlet of 500 KL Proposed ELSR at Kakanipalem
1739	Inlet of 500 KL Proposed ELSR at NTR Nagar
1740	Inlet of 400 KL Proposed ELSR at Zone-6
1741	200 MM Dia Above Specification.
1742	Inlet of 1200 KL Proposed ELSR at NSP office
1743	Inlet of 900 KL Proposed ELSR at Zone-5
1744	250 MM Dia Above Specification.
1745	Inlet of 1400 KL Proposed ELSR at Jr. college
1746	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
1747	100MM Dia Above Specification.
1748	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1749	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1750	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1751	150 MM Dia Above Specification.
1752	Inlet of 500 KL Proposed ELSR at Kakanipalem
1753	Inlet of 500 KL Proposed ELSR at NTR Nagar
1754	Inlet of 400 KL Proposed ELSR at Zone-6
1755	200 MM Dia Above Specification.
1756	Inlet of 1200 KL Proposed ELSR at NSP office
1757	Inlet of 900 KL Proposed ELSR at Zone-5
1758	250 MM Dia Above Specification.
1759	Inlet of 1400 KL Proposed ELSR at Jr. college
1760	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
1761	100MM Dia Above Specification.
1762	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1763	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1764	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1765	150 MM Dia Above Specification.
1766	Inlet of 500 KL Proposed ELSR at Kakanipalem
1767	Inlet of 500 KL Proposed ELSR at NTR Nagar
1768	Inlet of 400 KL Proposed ELSR at Zone-6
1769	200 MM Dia Above Specification.
1770	Inlet of 1200 KL Proposed ELSR at NSP office
1771	Inlet of 900 KL Proposed ELSR at Zone-5
1772	250 MM Dia Above Specification.
1773	Inlet of 1400 KL Proposed ELSR at Jr. college
1774	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1775	100MM Dia Above Specification.
1776	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1777	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1778	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1779	150 MM Dia Above Specification.
1780	Inlet of 500 KL Proposed ELSR at Kakanipalem
1781	Inlet of 500 KL Proposed ELSR at NTR Nagar
1782	Inlet of 400 KL Proposed ELSR at Zone-6
1783	200 MM Dia Above Specification.
1784	Inlet of 1200 KL Proposed ELSR at NSP office
1785	Inlet of 900 KL Proposed ELSR at Zone-5
1786	250 MM Dia Above Specification.
1787	Inlet of 1400 KL Proposed ELSR at Jr. college
1788	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1789	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1790	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1791	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1792	Inlet of 500 KL Proposed ELSR at Kakanipalem
1793	Inlet of 500 KL Proposed ELSR at NTR Nagar
1794	Inlet of 400 KL Proposed ELSR at Zone-6
1795	Inlet of 1200 KL Proposed ELSR at NSP office
1796	Inlet of 900 KL Proposed ELSR at Zone-5
1797	Inlet of 1400 KL Proposed ELSR at Jr. college
1798	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
1799	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1800	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1801	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1802	Inlet of 500 KL Proposed ELSR at Kakanipalem
1803	Inlet of 500 KL Proposed ELSR at NTR Nagar
1804	Inlet of 400 KL Proposed ELSR at Zone-6
1805	Inlet of 1200 KL Proposed ELSR at NSP office
1806	Inlet of 900 KL Proposed ELSR at Zone-5
1807	Inlet of 1400 KL Proposed ELSR at Jr. college
1808	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1809	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1810	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1811	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1812	Inlet of 500 KL Proposed ELSR at Kakanipalem
1813	Inlet of 500 KL Proposed ELSR at NTR Nagar
1814	Inlet of 400 KL Proposed ELSR at Zone-6
1815	Inlet of 1200 KL Proposed ELSR at NSP office
1816	Inlet of 900 KL Proposed ELSR at Zone-5
1817	Inlet of 1400 KL Proposed ELSR at Jr. college
1818	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
1819	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1820	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1821	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1822	Inlet of 500 KL Proposed ELSR at Kakanipalem
1823	Inlet of 500 KL Proposed ELSR at NTR Nagar
1824	Inlet of 400 KL Proposed ELSR at Zone-6
1825	Inlet of 1200 KL Proposed ELSR at NSP office
1826	Inlet of 900 KL Proposed ELSR at Zone-5
1827	Inlet of 1400 KL Proposed ELSR at Jr. college
1828	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1829	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1830	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1831	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1832	Inlet of 500 KL Proposed ELSR at Kakanipalem
1833	Inlet of 500 KL Proposed ELSR at NTR Nagar
1834	Inlet of 400 KL Proposed ELSR at Zone-6
1835	Inlet of 1200 KL Proposed ELSR at NSP office
1836	Inlet of 900 KL Proposed ELSR at Zone-5
1837	Inlet of 1400 KL Proposed ELSR at Jr. college
1838	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
1839	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1840	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1841	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1842	Inlet of 500 KL Proposed ELSR at Kakanipalem
1843	Inlet of 500 KL Proposed ELSR at NTR Nagar
1844	Inlet of 400 KL Proposed ELSR at Zone-6
1845	Inlet of 1200 KL Proposed ELSR at NSP office
1846	Inlet of 900 KL Proposed ELSR at Zone-5
1847	Inlet of 1400 KL Proposed ELSR at Jr. college
1848	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1849	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1850	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1851	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1852	Inlet of 500 KL Proposed ELSR at Kakanipalem
1853	Inlet of 500 KL Proposed ELSR at NTR Nagar
1854	Inlet of 400 KL Proposed ELSR at Zone-6
1855	Inlet of 1200 KL Proposed ELSR at NSP office
1856	Inlet of 900 KL Proposed ELSR at Zone-5
1857	Inlet of 1400 KL Proposed ELSR at Jr. college
1858	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1859	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1860	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1861	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1862	Inlet of 500 KL Proposed ELSR at Kakanipalem
1863	Inlet of 500 KL Proposed ELSR at NTR Nagar
1864	Inlet of 400 KL Proposed ELSR at Zone-6
1865	Inlet of 1200 KL Proposed ELSR at NSP office
1866	Inlet of 900 KL Proposed ELSR at Zone-5
1867	Inlet of 1400 KL Proposed ELSR at Jr. college
1868	Erection, testing and commissioning of Reservoir Management unit including dejointing of Proposed pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1869	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1870	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1871	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1872	Inlet of 500 KL Proposed ELSR at Kakanipalem
1873	Inlet of 500 KL Proposed ELSR at NTR Nagar
1874	Inlet of 400 KL Proposed ELSR at Zone-6
1875	Inlet of 1200 KL Proposed ELSR at NSP office
1876	Inlet of 900 KL Proposed ELSR at Zone-5
1877	Inlet of 1400 KL Proposed ELSR at Jr. college
1878	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1879	Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout
1880	Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout
1881	Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout
1882	Inlet of 500 KL Proposed ELSR at Kakanipalem
1883	Inlet of 500 KL Proposed ELSR at NTR Nagar
1884	Inlet of 400 KL Proposed ELSR at Zone-6
1885	Inlet of 1200 KL Proposed ELSR at NSP office
1886	Inlet of 900 KL Proposed ELSR at Zone-5
1887	Inlet of 1400 KL Proposed ELSR at Jr. college
1888	24 x 7 Water Supply ::DMA Management ::
1889	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.
1890	200MM Dia Above Specification.
1891	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1892	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
1893	200MM Dia Above Specification.
1894	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1895	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
1896	200MM Dia Above Specification.
1897	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1898	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1899	200MM Dia Above Specification.
1900	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1901	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
1902	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1903	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
1904	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1905	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1906	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1907	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1908	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1909	Erection, testing and commissioning of DMA management unit including dejointing of Proposed pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1910	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1911	Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
1912	Pressure points at Highest Point, Lowest Point & Furthest Point
1913	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1914	Under 500 KL ELSR at NTR Nagar
1915	Under 500 KL ELSR at Kakani palem
1916	Under 1200 KL ELSR at NSP Office
1917	Under 400 KL ELSR at Market yard (Existing)
1918	Under 900 KL ELSR at Market yard (AIIB)
1919	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
1920	Inlet of DMA-1&2 under 1400 KL ELSR at Jr College
1921	AMI Water Meter Management.
1922	Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A.
1923	DN 15 - PN 16 AMR Compatible Mechanical Water Meter as per above specification for all reservoirs comman area
1924	Under DMA-1,2&3 under 1000 KL ELSR atGovt. College & Junior College with above specifications
1925	Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.
1926	Local SCADA Control Sation:
1927	Establishment of HARDWARE for Individual Local Control Station at Individual ULB ::
1928	Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
1929	Desktop PC Station with specification of I7Processor, 8 GB Ram, ,512 GB SSD,Licensed OS, 21\" Screen with Mouse, keyboard, and relevant accessories make of LENOVO/ HP/ DELL
1930	55\" LED Display make of Sony/Samsung/ LG or equilant with ethernet/HDMI/VGA supported for front end view by connecting with PC in dual mode operation and View the SCADA screenswith required cables and connectors etc., complete.
1931	Modem with specifications of Fibre Port having ILL, PON &Network Features, Speed 100/1000, LAN Ports, Fibre port x 1 N0make of CISCO/ HP/ FF/ONV/PHOENIX/Dlink/ Suggested by the telecom provider
1932	3 KVA Stabilizer with specifications of 220 V.ACInput/ 220 V.AC output, necessary terminal wires etc., complete complete
1933	3 KVA online ups with specifications of 220 V.ACInput/ 220 V.AC output, Static By pass with isoltion transformer, Required Battery bank,make ofVertex/EATON/ BPE/ NUMERIC /RIELLO / ENERTECH complete
1934	3 in one on line B/W A4 Lazer Jet printer
1935	Network for all local control stations and central station with registration with any communication provider and payment of minimum one year subscription and establishment of communication
1936	Establishment of Local SCADA station at Addanki Municipality with the above specifications.
1937	Development of Softwares for Individual Local Control Station at Individual ULB ::
1938	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
1939	Development and providing the WEB based SCADA for Operation and Monitoring by the individual ULB where implemented the Reservoir management to AMI management. (Expandable upto Source to end user)
1940	Development of front end view monitoring and operating application in Digital Twin Mode with 3D & 2D model including designing, animation, drawings and integration of SCADA with field devices through MQTT/ MODBUS/ TCPIP protocol etc., complete.
1941	Develop, Supply, install and commissioning of customized WEB applications for Data analytics, Visulation, Trends, Data auditing, generating the reports as required by the customerat the time of commissioning
1942	Develop, Supply, install and commissioning of Anroid & IO\"s application for data monitoring by through Mobi-APP as required by the customerat the time of commissioningcomplete
1943	Establishment of Local SCADA station at Addanki Municipality with the above specifications.
1944	Construction of Clear Water SCADA Room 8.00 x 12.00 Size.
1945	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
1946	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
1947	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
1948	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
1949	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
1950	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
1951	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings
1952	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workPedastals around Columns
1953	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workColumns Up to plinth
1954	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workPlinth Beams 300 x 400
1955	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workColumns
1956	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workUp to First Floor Roof Level
1957	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workBeams 230 x 500
1958	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workLintels
1959	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workSunshades
1960	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workStaircase slab 0.15 m thick
1961	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workRCC Slab 150mm thick
1962	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
1963	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).For Ground Floor Level
1964	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).For First Floor Level
1965	11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.
1966	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.For First Floor Level
1967	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.For First Floor
1968	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
1969	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
1970	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
1971	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
1972	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
1973	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
1974	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
1975	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
1976	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
1977	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
1978	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
1979	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
1980	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
1981	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
1982	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
1983	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
1984	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
1985	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
1986	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
1987	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
1988	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
1989	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
1990	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
1991	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
1992	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
1993	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
1994	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
1995	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
1996	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k
1997	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1998	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
1999	SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
2000	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
2001	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2002	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
2003	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
2004	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
2005	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
2006	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
2007	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
2008	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
2009	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines and inlet
2010	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets
2011	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
2012	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
2013	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
2014	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
2015	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
2016	S& F GI union Ist Quality 12.70mm
2017	S& F GI union Ist Quality 19.05mm
2018	S& F GI union Ist Quality 25.40mm
2019	Carting away the surplus excavated materialsi.e., earthfrom the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
2020	Hiring for 1 No Vehicles for 36 Months for Departmental use during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
2021	Providing Technical Diploma Engineer for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge.
2022	Providing Distribution Network to all Zones with HDPE Pipe lines - 110/160/200/250/315/355mm dia
2023	Cutting open cement concrete road surface including depositing of excavated materials for pipe line trench work including labour charges and all incidental and operational charges etc., complete..
2024	Cutting open bituminous tar road surface including depositingof excavated materials for pipe line trench work including labour charges and all incidental and operational charges etc., complete.
2025	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
2026	RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5
2027	Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum
2028	Providing of compacted Crusher dust bed complying with specifications for spreading for pipeline works - 1 Cum
2029	Manufacture, Supply and Delivery of HDPE Pipes PN 6.0 PE 100 grade conforming to IS: 4984 - 1995 including transportation to any where in A.P,including transporatation, Excise duty and Taxes etc complete
2030	110mm dia
2031	160mm dia
2032	180mm dia
2033	200mm dia
2034	225mm dia
2035	250mm dia
2036	280mm dia
2037	315mm dia
2038	355mm dia
2039	Lowering , Laying, Jointing and testing of HDPE pies with minimum water lead of 500m, including all taxes etc complete
2040	110mm dia
2041	160mm dia
2042	180mm dia
2043	200mm dia
2044	225mm dia
2045	250mm dia
2046	280mm dia
2047	315mm dia
2048	355mm dia
2049	Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and In
2050	150mm dia
2051	200mm dia
2052	250mm dia
2053	300mm dia
2054	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W
2055	100mm dia Sluice valve
2056	150mm dia
2057	200mm dia
2058	250mm dia
2059	100mm dia Scour valve
2060	Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of valve in mm
2061	100mm dia Sluice valve (including 45 already available in Stock)
2062	150mm dia
2063	200mm dia
2064	250mm dia
2065	300mm dia
2066	100mm dia Scour valve
2067	Jointing the C.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete
2068	100mm dia Sluice valve
2069	150mm dia
2070	200mm dia
2071	250mm dia
2072	300mm dia
2073	100mm dia Scour valve
2074	Manufacture, Supply & Delivery of HDPE fittings conforming to IS 4984-1995 including transportation, to anywhere in AP.
2075	110x110x110 - PlainTEE
2076	160x160x160 - Plain TEE
2077	200x200x200 - Plain TEE
2078	250x250x250 - Plain TEE
2079	315x315x315 - Plain TEE
2080	110 mm dia bends
2081	150x100 - Reducer
2082	200x100 - Reducer
2083	280x315
2084	315x355
2085	Manufacture, Supply, delivery, lowering, jointing, laying 300mm dia RCC NP3 class pipes for encasing to Road crossings and Drain crossings
2086	Construction ofR.C.C.valve chamber in M20 Grade concreteas per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its
2087	100mm dia Sluice valve
2088	150mm dia Sluice valve
2089	200mm diaScour valve
2090	250mm dia
2091	300mm dia
2092	PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed
2093	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. (CC pavement)
2094	Providing House Service Connections
2095	Providing house service connections at house holds side in earthern roads
2096	Providing house service connections at other side in earthern roads
2097	Providing house service connections at otherside in BT &CCroads
2098	Providing house service connections at HHside in BT &CCroads
2099	Provision for Environmental Mitigation Measures
2100	Item No#27.Implementation of Environmental Management plan
2101	Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations)once in a month duringthe Pre-Construction periodand once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
2102	Noiselevel(5Monitoringstations)onceina season during the Pre-Construction period and once in a season forthree seasons (10Monitoringstations) during the constructionperiodat Intake well,Sump& PH,FiltrationPlant/WTP,ELSRs,Pipelines &Distribution network
2103	Water Quality Monitoring surface / ground(5 Monitoring stations)once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during theconstructionperiod atIntakewell,Sump&PH,Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
2104	Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)
2105	Cutting of Trees and removal
2106	Greenbelt development and maintenance in the surroundings / Buffer zone as per approved drawing
2107	Health checkups and free medical distribution
2108	Awareness program/training
2109	Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism:Sprinkling of watertwice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of watertwice in a day for 1 vehicles x 100 days (excluding rainy days) during Operationalphase.
2110	Project Information Boards - Setting up of Sign boards, Posters, barricades etc.
2111	Manning, Operation and Maintenance ofAddanki Municiaplity Water Supply Improvements Scheme for 7 years
2112	Personal required for operating Intake/Offtake well/Pump houses Operator
2113	Personal required for operating Intake/Offtake well/Pump housesFitter/Helper
2114	Personal required for operating Intake/Offtake well/Pump houses Watch man
2115	Personal required at operating Raw water rising mains Fitter/Helper
2116	Personal required at operating Water treatment plants & Sump Operator
2117	Personal required at operating Water treatment plants & Sump Fitter/Helper
2118	Personal required at operating Water treatment plants & Sump Watch man
2119	Personal required at operating Water treatment plants & Sump Lab Tecnician
2120	Personal required at operating distribution system Fitter/Helper
2121	A) Chlorine gas for Disinfection @ 3 mg/Lt Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines 1st year
2122	B) Alumino -Ferric (Alum) @ 20 mg/Lt Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement a1st year
2123	Repairs to pumpsets & Water pipe lines (2 years after execution period) i) Replacement of bearings of pumpsets
2124	iv)Replacement of glands of sluice valves
2125	v) Replacements of balls of Air valves
2126	vi) Greease
2127	vii) Gland Packing
2128	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 250 mm HDPE Pipes
2129	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 200 mm HDPE Pipes
2130	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 160 mm HDPE Pipes
2131	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 110 mm HDPE Pipes
2132	LOCAL SCADA at ULB LEVEL
2133	Jr. Service Engineer (Diploma Engineer)Rate as per Labour Rates LAB-00127 of CSSR 2025-26
2134	Data Operator Rate as per Labour Rates LAB-00134 ofCSSR 2025-26
2135	Office assistant, Rate as per Labour RatesLAB-00124 ofCSSR 2025-26
2136	II) MAINTAINANCE OF LOCAL CONTROL STATION : SCADA
2137	Clear Water outlet of Water Treatment plant
2138	Inlet Arrangments to
2139	500KL ELSR with 18 M Staging in Zone -1 near NTR nagar
2140	500 KLELSR with 18 m stagingat Bommanapadu
2141	300 KLELSR with 15m stagingat Velamuripadu
2142	300 KLELSR with 15m stagingat Nagulapadu
2143	1400 KL ELSR - Jr College
2144	1200 KL ELSR - NSP Office
2145	900 KL ELSR - Market Yard
2146	Replacement of necessary tranducers for PH analysers
2147	Clear Water outlet of Water Treatment plant(Re-imbersable on submission of Proof of Payment)
2148	Replacement of necessary tranducers for Turbidity analysers
2149	Clear Water outlet of Water Treatment plant
2150	BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment)
2151	GPRS Connections
2152	WTP Quality Management
2153	ELSR Management
2154	DMA Management
2155	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)
2156	CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA
2157	Application Engineer,(Graduate Engineer)To monitor all issues related to both operation & service
2158	System Engineer,(Graduate Engineer)To monitor all meters location through SCADA station and give feedback to the service engineers.
2159	Sr. Service Engineer (Graduate Engineer )To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns
2160	Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.
2161	Office assistant,To assist the entire team, dispatches and also maintain SCADA station clean and neat
2162	II) MAINTAINANCE OF LOCAL CONTROL STATION : 16 out of 84 Months
2163	BSNL Charges for static IPInterconnection for Data receive station from all Local Contol RTU panels.
2164	Data base management for WEB reportingData storage and reporting system for view through WEB and Mobile networks
2165	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)
2166	TIRUVURU NAGAR PANCHAYAT
2167	Construction of 10.00m dia. Raw Water Intake Wellat Ferry , Ibrahimpatnamin River Krishna
2168	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts a) Up to 2.00mdepth from +26.00 m to +24.00m
2169	b) 2.00m to 4.00m depth
2170	c) 4.00m to 6.00m depth
2171	d) 6.00m to 8.00m depth
2172	e) 8.00m to 10.00m depth
2173	f) 10.00m to 11.00m depth
2174	g) 11.00m to 12.00m depth
2175	h) 12.00m to 13.00m depth
2176	i) 13.00m to 14.00m depth
2177	j) 14.00m to 15.00m depth
2178	k) 15.00m to 16.00m depth
2179	l) 16.00m to 16.63m depth
2180	l) 17.00m to 18m depth
2181	l) 18.00m to 19m depth
2182	l) 19.00m to 20m depth
2183	l) 20.00m to 21m depth
2184	l) 21.00m to 22m depth
2185	Providing concrete for plain/reinforced concrete M15 grade in open foundations using40 mm, 20mm nominal size & 10mm nomial size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH
2186	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for base slab
2187	b) for Well Curb0.30m thick
2188	for Side walls (Well Steining)
2189	Side Wallof the Well of 0.50m thick uptobund level to Normal water level + 22.00m to +17.89m=4.11m
2190	Side Wall of the Well of 0.50m thick up to bumd level(22.00-17.89 =4.11) extra lift
2191	platform for placing Sluice Valves
2192	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)a) for Pump house Columns (8+3)
2193	Centre Beams
2194	c) for Floor Slab 0.25 m thick including 1.00m walk way
2195	d) for Lintel Beams alround
2196	e) for Roof Beams
2197	f) for Roof slab 0.125m thick 0.45m extension
2198	g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end
2199	Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.Sfor Super structure of Pump house
2200	for Pump house Parapet wall
2201	Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S
2202	Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house
2203	b) for Parapet wall
2204	Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903)
2205	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for ceiling
2206	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
2207	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2208	Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201)
2209	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
2210	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30 For Pump house1.35x1.20m size
2211	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities
2212	Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities.
2213	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
2214	Supply and delivery of \"Resilient Seated SoftSealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15or GGG-50/SG-500/7 or Equivalent as perIS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without glandpacking with 3-O ring protection system on theShaft and Seals of NBR. The Valves should beVacuum tight and 100% leak proof with face toface dimensions as BS:5163 Type A/IS:14846. Allthe valves should be with fusion bondedElectrostatic Powder coating both inside andoutside (Min 250 Microns)- RAL 5005 withPocket Less Straight through body Passageconforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS- 1538 excluding all taxes, duties Drilled as per IS:1538. PN16 including Transportation - 350mm
2215	Supply and delivery of 350mm dia. 2.0m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) endsof K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
2216	Labour charges for lowering and keeping in position of C.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves
2217	Supply and delivery of centrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
2218	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
2219	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 - 350mm
2220	Supply and delivery ofS.S304 gradeoperating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities.
2221	Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab
2222	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2223	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges
2224	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2225	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2226	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2227	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2228	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2229	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2230	Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
2231	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2232	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2233	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
2234	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2235	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2236	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2237	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2238	Providing temporory Island for preparation platform for sinking of Intake well-for Intake well10m dia- island 30m dia and 10m height
2239	Providing and construction of temporary island of 16Mt. diameter for preparation of platform etc. for construction of well foundation for 8Mt. internal dia. Intake well as per Tech. Specification 1203 MORTH.for Intake well10m dia- island 30m dia and 10m height
2240	Collection and supply and spreading of gravel including compaction ctc completefor approach ramp
2241	Construction of ApprochBridge for Intake well at Krishna River
2242	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for approach ramp (6.00+30.00)/2 ( complete removal is only after completion of bridge
2243	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for approach ramp (6.00+30.00)/2 ( complete removal is only after completion of bridge
2244	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
2245	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2246	Laying of VCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S
2247	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) column footings
2248	Columns
2249	For Intermediate Braces
2250	For Carriage Slab Beams
2251	For Carriage Slab 0.30m thick
2252	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
2253	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
2254	Supply and erection of 3# of 74.60 KW(100HP) VT Pumpsets each with a duty of 64 LPS and a total hed of 86m ( two working and one stand bye) for pumping Raw water from intake well to intermediate sump Mylavaram for intermediate requirement 2033
2255	Supply, delivery and erection of 3# of 74.60 KWelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 64 LPS at total head of 86.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.
2256	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
2257	Errection of 315 KVA transformer at WTP with Transformer yard 15.00x12.00m
2258	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
2259	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
2260	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
2261	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
2262	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
2263	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
2264	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
2265	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
2266	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below: A) Earth Electrodes
2267	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
2268	C) Epoxy insulators
2269	D) No.\"8\" SWG Copper wire. MAT 04141
2270	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04045D315 KVA
2271	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
2272	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
2273	In Coming a) . a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2274	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
2275	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
2276	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
2277	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
2278	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
2279	g).3RYB Phase indication lamps with leds
2280	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
2281	OUT GOING-630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2282	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2283	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2284	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2285	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2286	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2287	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
2288	.KWH digital meter fro lighting section
2289	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
2290	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
2291	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
2292	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
2293	Supply and Laying of 3C X 70Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458
2294	Transformer yard Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
2295	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2296	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2297	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM20 design mix concrete - column footings
2298	Columns1.20-0.10-0.10-0.30+1.80
2299	Plinth beam2(15+12)=54-gate3.00=51.00
2300	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
2301	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2302	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
2303	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
2304	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2305	supply and filling the transformer yard with 40mm HBG metal m/c
2306	Construction of electrician / operator/watchmanquarters at Intake Wellat Ferry , Ibrahimpatnamin River Krishna
2307	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
2308	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2309	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2310	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
2311	b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
2312	c) Plinth beam
2313	d) Lintle beamsWindows
2314	e) Roof Beams
2315	f) Roof slab0.125m thick with 0.30m extension all sides
2316	g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
2317	h) Loft slab 0.075m thick kitchen
2318	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
2319	1st floor
2320	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
2321	1st floor
2322	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
2323	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
2324	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
2325	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoor -D - 1.20X2.10 m
2326	DoorsD1 -1.00X2.10m
2327	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
2328	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
2329	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
2330	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2331	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
2332	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2333	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
2334	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
2335	Providing Electrification
2336	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2337	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
2338	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2339	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2340	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2341	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2342	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2343	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2344	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
2345	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2346	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2347	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
2348	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2349	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2350	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2351	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2352	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
2353	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke
2354	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
2355	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
2356	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2357	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
2358	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
2359	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
2360	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
2361	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
2362	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
2363	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
2364	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
2365	15 mm dia nominal bore -for internal
2366	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
2367	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
2368	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
2369	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
2370	S& F GI union Ist Quality 12.70mm
2371	19.05mm
2372	25.40mm
2373	For septic Tank
2374	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
2375	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
2376	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2377	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
2378	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
2379	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A
2380	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2381	Construction of Compound wall at intake well Ibrahimpatnam (92.00m compound wall+40.00m Fencing)
2382	Constuction of compound wall with the following specifications1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
2383	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2384	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2385	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
2386	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2387	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2388	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretecolumn footings
2389	columns
2390	Plinth beam
2391	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2392	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
2393	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
2394	Construction 11.00 m dia (285.32 KL) Raw water intermediate sump atMylavaram
2395	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--upto 3m depth- Mechanical
2396	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--upto 3m depth - manual
2397	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil- for Raw water intermediate sump foundations 3.00-6.00m Machanical means
2398	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
2399	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
2400	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer a) Raft slab
2401	b) For side walls circular 0.30m thick initial height 3.00 mbelow GL
2402	c) For side walls circular 0.30m thick above GL
2403	d) Columns0.30 x 0.30 ,
2404	e) Roof Beams
2405	f) Roof slab0.15m thick 0.786*(13.10^2-6.00^2)
2406	g) Roof dome slab 0.15m thick
2407	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
2408	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
2409	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
2410	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2411	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
2412	Construction of 10.50x7.50m pump house for Raw water pumps and motors at proposed intermediate sump Mylavaram
2413	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By Mechanical means
2414	By Manual Means
2415	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
2416	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2417	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete Column footings
2418	Pedestals
2419	Columns
2420	Plinth beam
2421	Lintel beams
2422	Roof Beams
2423	Roof slab0.125m thick,
2424	Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
2425	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss a) Ground floor
2426	b)1st floor Parapet wall
2427	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & insidea) Ground floor
2428	b)1st floor
2429	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
2430	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
2431	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
2432	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
2433	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Windows1.50x1.20m
2434	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2435	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2436	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2437	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
2438	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
2439	Providing Electrification
2440	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2441	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
2442	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2443	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2444	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2445	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2446	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2447	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2448	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
2449	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2450	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2451	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
2452	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2453	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2454	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2455	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2456	Errection of 600 KVA Transformer at intermediate sump Mylavaramwith Transformer yard 15.00x12.00m
2457	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply Quotation Rate
2458	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
2459	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
2460	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
2461	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps Quotation Rate
2462	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
2463	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures Quotation Rate
2464	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
2465	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:A) Earth Electrodes
2466	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
2467	C) Epoxy insulators
2468	D) No.\"8\" SWG Copper wire. MAT 04141
2469	Supply and Transportation of ISI marked copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-08780a630KVA
2470	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
2471	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
2472	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
2473	In Coming a) .a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2474	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
2475	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
2476	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
2477	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
2478	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
2479	g).3RYB Phase indication lamps with leds Quotation
2480	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
2481	OUT GOING-500630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2482	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2483	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2484	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2485	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
2486	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
2487	.KWH digital meter fro lighting section Quotation
2488	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
2489	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
2490	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
2491	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete. Quotation
2492	Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03459
2493	Transformer yard
2494	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
2495	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2496	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2497	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM20 design mix concrete - column footings
2498	Columns1.20-0.10-0.10-0.30+1.80
2499	Plinth beam2(15+12)=54-gate3.00=51.00
2500	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
2501	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2502	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
2503	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
2504	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2505	supply and filling the transformer yard with 40mm HBG metal m/c
2506	Supply and erection of 3# of 100.71 KW(135HP) CF Pumpsets each with a duty of 64 LPS and a total head of 115m( two working simaltaneouly and one stand bye) for pumping Raw water fromintermediate sump Mylavaram to proposed GLBR Deepa Nagar for intermediate requirement 2033
2507	Supply, delivery and erection of 3# of 100.71 KWelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 64 LPS at total head of 115.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.
2508	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
2509	Providing 500mm dia. D.I. K9 Raw Water Pumping main from Intake well at Ferryto Raw Waterintermediate Sump at Mylavaram ( 0.045 KM MS pipe+Chainage from 0.00Km to 26.33Km)
2510	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2511	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2512	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities
2513	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.Ordinery soils-Manual meansupto 3.00m depth Taking output = 10 cum
2514	Ordinery soils-Mechanical Means Upto 3 m depth Taking output = 240 cumUnit = 1.00cum
2515	Ordinary rock (not requiring blasting) Manual meansupto 3.00m depth Taking output = 10 cum
2516	Ordinary rock (not requiring blasting) Mechanical Means Upto 3 m depth Taking output = 180 cum
2517	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
2518	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete - 500 mm dia DI K9
2519	Supply and delivery of Centrifugally cast (spun) Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities.
2520	250mm dia. D. I Specials
2521	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.250mm dia 2.00m long DI DF pipes for scour
2522	500mm dia 2.00m long DI DF pipes at intake well cum pump house
2523	500mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2
2524	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 500 mm dia DI K9
2525	Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 -500 mm dia DI K9
2526	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. - 500 mm
2527	250 mm dia
2528	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 - a) 500 mm dia
2529	b) 250 mm dia
2530	c) 150 mm dia
2531	Manufacture, supply and delivery at work site 450mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge 450 mm dia 10 mm thick plate
2532	Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes andtransportation, etc complete ISI marked PN 1.6 (MPa) -500mm Ø DI D/F valve - PN16
2533	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and st - a) 250mm Ø DI D/F valve - PN16 for scour acking care fully at site etc.complete as per S.S
2534	b) 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves
2535	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S -150mm dia. PN16
2536	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. - 500mm dia
2537	Manufacture and supply of- Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mm PN 16
2538	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 500mm dia
2539	250 mm dia
2540	150 mm dia
2541	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 150 mm dia
2542	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
2543	Construction of Anchor blockswith P.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities.
2544	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
2545	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 2.1x2.1x1.60 Mts size) -500mm dia
2546	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.6x 1.6x1.30 Mts size) -250mm dia
2547	Construction ofCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.80x2.00x1.30mm size -For 100 mm dia. Air Valves on 450 mm dia line
2548	Collection ,supply and spreading of crusher stone dust from approved quarries including compaction and watering etc., complete as per S.S
2549	Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.M30
2550	providingP.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities for encasing
2551	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
2552	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
2553	Providing and Laying of Interlocking Concrete Block Pavements using CC M30 having thickness 50 mm as per drawing and Technical Specification Clause 1504 MORDRBR-CCPV-13-ii Using 2/3rd of old and 1/3rd new )
2554	Laying of 800mm dia.(10 mm thick plate) for Railway crossing and NH crossings atNational High way@ km1.220,Railway track @ km 6.73,N.H Crossing(Mylavaram bye pass crossing starting point)
2555	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe -800 mm dia
2556	Construction of electrician / operator/watchmanquarters at intermediate sump Mylavaram
2557	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
2558	Mechanical means
2559	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2560	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2561	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
2562	b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
2563	c) Plinth beam
2564	d) Lintle beamsWindows
2565	e) Roof Beams
2566	f) Roof slab0.125m thick with 0.30m extension all sides
2567	g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
2568	h) Loft slab 0.075m thick kitchen
2569	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
2570	1st floor
2571	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
2572	1st floor
2573	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
2574	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
2575	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
2576	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoor -D - 1.20X2.10 m
2577	DoorsD1 -1.00X2.10m
2578	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
2579	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
2580	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
2581	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2582	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
2583	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2584	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
2585	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
2586	Providing Electrification
2587	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2588	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
2589	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2590	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2591	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2592	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2593	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2594	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2595	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
2596	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2597	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2598	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
2599	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2600	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2601	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2602	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2603	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
2604	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke
2605	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
2606	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
2607	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2608	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
2609	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
2610	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
2611	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
2612	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
2613	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
2614	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
2615	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
2616	15 mm dia nominal bore -for internal
2617	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
2618	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
2619	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
2620	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
2621	S& F GI union Ist Quality 12.70mm
2622	19.05mm
2623	25.40mm
2624	For septic Tank
2625	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
2626	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
2627	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2628	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
2629	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
2630	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
2631	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2632	Construction of Compound wall at intermediate sump Mylavaram
2633	Constuction of compound wall with the following specifications 1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
2634	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2635	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2636	Construction 11.00 m dia(285.32KL) Raw water GLBR atDeepika Nagar
2637	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth
2638	for Raw water GLBRfoundations 3.00-6.00m Machanical means
2639	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)-for Raw water GLBRfoundations
2640	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations - for Raw water GLBRfoundations
2641	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer
2642	Raft
2643	For side walls circular 0.30m thick below GL
2644	For side walls circular 0.30m thick above GL
2645	Columns 0.30 x 0.30m 3.60-0.30
2646	Roof beams
2647	Roof slab0.15m thick 0.786x(11.60^2-4.70^2)
2648	Roof dome slab 0.15m thick
2649	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work- Top of slab
2650	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side) out side, Top of slab, extra for dome
2651	Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities Man hole cover, Ladder
2652	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2653	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
2654	inlet,out let,over flow and scour arrengements -Supply and delivery of Centrifugally cast (spun) Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities.
2655	out,arrengements
2656	inlet,arrengements over flow,arrengements scour,arrengements
2657	Supply and delivery of centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating including transportation, excluding taxes & duties etc., complete as per S.S
2658	inlet,arrengements
2659	450mm x2.00m long DI DF pipes forverticals
2660	450mm x1.00m long DI DF pipes forverticals
2661	450mm x1.00m long DI DF pipes forsluice valves
2662	out,arrengements
2663	500mm x2.00m long DI DF pipes forverticals
2664	500mm x1.00m long DI DF pipes forsluice valves
2665	over flow,arrengements
2666	450mm x2.00m long DI DF pipes forverticals
2667	450mm x1.00m long DI DF pipes forverticals
2668	scour,arrengements
2669	300mm x2.00m long DI DF pipes forverticals
2670	300mm x1.00m long DI DF pipes for scour valve
2671	Lowering D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
2672	500 mm dia
2673	450 mm dia
2674	300 mm dia
2675	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
2676	500mm dia.
2677	450mm dia.
2678	300mm dia.
2679	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation PN 1.6
2680	inlet 450 mm dia
2681	out let 500 mm dia
2682	scour 300 mm dia
2683	Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and excluding all taxescomplete.PN 1.6 (MPa)
2684	inlet 450 mm dia
2685	out let 500 mm dia
2686	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
2687	500 mm dia
2688	450mm dia.
2689	300mm dia for scour
2690	Construction ofCC Sluice Valve chambers suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfinished item of work
2691	For 500mm dia. Sluice Valves
2692	For450mm dia. Sluice Valves
2693	300mm dia for scour
2694	Laying 500mm dia. D.I. K9 Raw Water Pumping main fromRaw Waterintermediate Sump 335.55 KL capacityat Mylavaram to proposed 335.55 KL GLBR at Deepla Nagar(Chainage from 26.33Km to 47.19 Km)
2695	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2696	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2697	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities
2698	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches. For 500mm dia. D.I K9 Pumping main (Chainage from 26.33Km to 47.19 Km
2699	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
2700	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. For 500mm dia. D.I K9 Pumping main
2701	Supply and delivery of Centrifugally cast (spun) Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities. - 500mm dia. D. I Specials
2702	250mm dia. D. I Specials
2703	Supply and delivery of centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating including transportation, excluding taxes & duties etc., complete as per S.S
2704	250mm dia. 2.00m. Long for scours
2705	500mm dia. 1.00m. Long for sluice and non return valves
2706	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. For 500mm dia. D.I K9 Pumping main
2707	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.For 500mm dia. D.I K9 Pumping main
2708	Lowering D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of500 DI specials supply as per BIS No.3114/94.
2709	250mm dia. D. I Specials
2710	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
2711	500mm dia.
2712	250mm dia.
2713	100mm dia.
2714	Manufacture, supply and delivery at work site 450mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge
2715	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation PN 1.6
2716	500mm Ø DI D/F valve - PN16
2717	250mm Ø DI D/F valve - PN16 (for Scour)
2718	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/ PTFE/ EPDM/ NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes ,including transportation 100mm dia. PN16 .
2719	Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and excluding all taxescomplete.PN 1.6 (MPa) 500 mm dia
2720	Manufacture and supply of- Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mm PN 16 -100mm dia. PN16
2721	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
2722	500mm dia.
2723	250mm dia for scour
2724	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. dia. of Air Valve in mm - 100 mm dia
2725	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. At bends and Tees
2726	Construction of Anchor blockswith P.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. - For Anchor Blocks over service bridge and where ever necessary
2727	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
2728	Construction ofCC Sluice Valve pits suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfinished item of work For 500mm dia. Sluice Valve
2729	Construction of CC Scour Valve pit suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work.For 250mm dia. Scour Valves
2730	Construction ofCC Air Valve pit suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work For 100 mm dia. Air Valves on 500 mm dia line
2731	Collection ,supply and spreading of crusher stone dust from approved quarries including compaction and watering etc., complete as per S.S for C.C ,B.T and WBM Road restorationBT roads
2732	Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.M30 for C.C ,B.TRoad restoration BT roads
2733	providingP.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities for encasing .
2734	Providing and Laying of Interlocking Concrete Block Pavements using CC M30 having thickness 50 mm as per drawing and Technical Specification Clause 1504 MORDRBR-CCPV-13-ii Using 2/3rd of old and 1/3rd new )
2735	Laying 600mm dia. D.I. K7 Raw Water gravity main fromRaw Water proposed 285.32 KL GLBR at Deepika Nagar to proposed WTP Tiruvuru (Chainage from 47.19 Km to 71.84 Km)
2736	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2737	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. For Pipe line trenches.
2738	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities
2739	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches. For 600mm dia. D.I K7Pumping main (Chainage from 47.19Km to 71.84Km
2740	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
2741	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. For 600mm dia. D.I K7 Pumping main
2742	Supply and delivery of Centrifugally cast (spun) Ductile Iron fittings conforming to is:9523/2000 having dimentions as per table. The rate including zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) including transportation, taxes and duties etc., complete as per S.S and as directed by the departmental authorities. - 600mm dia. D. I Specials
2743	300mm dia. D. I Specials
2744	Supply and delivery of centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working lengths of1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating including transportation, excluding taxes & duties etc., complete as per S.S
2745	300mm dia. 2.00m. Long for scours
2746	600mm dia. 1.00m. Long for sluice and non return valves
2747	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.For 600mm dia. D.I K7 Pumping main
2748	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. For 600mm dia. D.I K7 Pumping main
2749	Lowering D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source ofFor 600mm dia. D.I K7 Pumping mainspecials supply as per BIS No.3114/94.
2750	300mm dia. D. I Specials
2751	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
2752	600mm dia.
2753	300mm dia.
2754	150mm dia.
2755	Manufacture, supply and delivery at work site 450mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge
2756	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation PN 1.6
2757	600mm Ø DI D/F valve - PN16
2758	300mm Ø DI D/F valve - PN16 (for Scour)
2759	Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/ PTFE/ EPDM/ NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes ,including transportation 150mm dia. PN16 .
2760	Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including transportation and excluding all taxescomplete.PN 1.6 (MPa) 600 mm dia
2761	Manufacture and supply of- Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mm PN 16 -150mm dia. PN16
2762	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
2763	600mm dia.
2764	300mm dia for scour
2765	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. dia. of Air Valve in mm - 150 mm dia
2766	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. At bends and Tees
2767	Construction of Anchor blockswith P.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. - For Anchor Blocks over service bridge and where ever necessary
2768	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
2769	Construction ofCC Sluice Valve pits suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfinished item of work For 600mm dia. Sluice Valve
2770	Construction of CC Scour Valve pit suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work.For 300 mm dia. Scour Valves
2771	Construction ofCC Air Valve pit suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work For 150 mm dia. Air Valves on 600 mm dia line
2772	Collection ,supply and spreading of crusher stone dust from approved quarries including compaction and watering etc., complete as per S.S for C.C ,B.T and WBM Road restorationBT roads
2773	Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.M30 for C.C ,B.TRoad restoration BT roads
2774	providingP.C.C. M20 nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities for encasing .
2775	Construction of electrician / operator/watchmanquarters at GLBR Deepika Nagar
2776	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
2777	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
2778	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2779	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
2780	b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
2781	c) Plinth beam
2782	d) Lintle beamsWindows
2783	e) Roof Beams
2784	f) Roof slab0.125m thick with 0.30m extension all sides
2785	g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
2786	h) Loft slab 0.075m thick kitchen
2787	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
2788	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
2789	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
2790	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
2791	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
2792	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoor -D - 1.20X2.10 m
2793	DoorsD1 -1.00X2.10m
2794	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
2795	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
2796	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
2797	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2798	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
2799	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2800	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
2801	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
2802	Providing Electrification
2803	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2804	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
2805	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2806	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2807	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2808	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2809	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2810	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2811	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
2812	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2813	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2814	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
2815	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2816	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2817	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2818	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2819	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
2820	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke
2821	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
2822	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
2823	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2824	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
2825	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
2826	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
2827	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
2828	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
2829	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
2830	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
2831	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
2832	15 mm dia nominal bore -for internal
2833	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
2834	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
2835	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
2836	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
2837	S& F GI union Ist Quality 12.70mm
2838	19.05mm
2839	25.40mm
2840	For septic Tank
2841	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
2842	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
2843	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2844	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
2845	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
2846	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
2847	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
2848	Laying of 800mm dia.(10 mm thick plate) forNH crossings atNational High wayat endingof N.H bye pass Crossing Deepika Nagar
2849	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe -800 mm dia
2850	Construction of Compound wall at intermediate sumpGLBR Deepika Nagar
2851	Constuction of compound wall with the following specifications1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
2852	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2853	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2854	Providing approach road to GLBR at Deepika Ngar
2855	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth
2856	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using Gravel
2857	Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller 80-100 kN / Vibratory Roller to achieve thedesired density, complete as per Technical Specification Clause 401 MORD / MORTH.RBR-SBBS-1 For Grading II Material (CBR Value minimum 25)
2858	Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost,seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (4th revision) for finished item of work. (Payment based on levels for finished item of work)
2859	Construction of9.0 MLD Rapid Gravity Filtration plant with Tube Settlers
2860	Design and Construction of 9.0 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using Gravel & sand as filter media, compatible duly following relevant CHPEEO Manual & IS codes in the design of plant components taking in to consideration 25% overloading including chlorine contact tankand including trial running for 90 days etc.,as per the appended Technical Specification of the tender document and also as per specifications of PHSSR 2018-19. All valves in the Filtration Plant should be compatable for operation with motorised Actuators integrated to SCADA
2861	Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation,taxes,duties etc
2862	1.00 length vertical from WTP
2863	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
2864	Supply and delivery of\"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation - 300mm dia
2865	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves as per technical specification-300mm dia
2866	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2- 300mm dia
2867	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.- 300mm dia
2868	Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means. 300mm dia pipeline trench
2869	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification 300mm dia pipeline trench
2870	Construction of CC Sluice Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work- 300 mm diaConstruction ofVRCC M-20 valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification (For 1.70x1.70x1.40m Mts size)
2871	Construction of 10.50x7.50m pump house for clear water pumps and motors at proposed WTP Tiruvuru
2872	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By Mechanical means
2873	By Manual Means
2874	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
2875	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
2876	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete Column footings
2877	Pedestals
2878	Columns
2879	Plinth beam
2880	Lintel beams
2881	Roof Beams
2882	Roof slab0.125m thick,
2883	Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
2884	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss a) Ground floor
2885	b)1st floor Parapet wall
2886	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & insidea) Ground floor
2887	b)1st floor
2888	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
2889	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
2890	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
2891	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
2892	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Windows1.50x1.20m
2893	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2894	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
2895	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
2896	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
2897	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
2898	Providing Electrification
2899	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
2900	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
2901	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
2902	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
2903	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
2904	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
2905	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
2906	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
2907	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
2908	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
2909	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
2910	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
2911	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
2912	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
2913	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
2914	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
2915	Construction 10.50m dia m dia (207.98 KL) clear watersump atWTP Tiruvuru
2916	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--upto 3m depth
2917	3-6.00m depth by manual means
2918	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
2919	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
2920	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer a) Raft slab
2921	b) For side walls circular 0.30m thick initial height 3.00 mbelow GL
2922	c) For side walls circular 0.30m thick above GL
2923	d) Columns0.30 x 0.30 ,
2924	e) Roof Beams
2925	f) Roof slab0.15m thick 0.786*(13.10^2-6.00^2)
2926	g) Roof dome slab 0.15m thick
2927	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
2928	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
2929	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
2930	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
2931	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
2932	Supply and erection of 3# of 29.84 Kw(40 HP) CF Pumpsets each with a duty of 45LPS and a total head of 45 m (Two working simaltaneously and one stand bye) to various proposed and existing ELSRs for intermediate requirement 2033
2933	Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.
2934	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
2935	Laying of 400mm,300 mm and 250mm, 200mm and 100 mm dia . DI K9 Pumpingmains from clear water sump at HWW to Proposed and existing ELSRs
2936	Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches.
2937	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
2938	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
2939	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.
2940	Ordinery soils-Manual meansupto 3.00m depth Taking output = 10 cum 10%
2941	Ordinery soils-Mechanical Means Upto 3 m depth Taking output = 240 cumUnit = 1.00cum 80%
2942	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1)
2943	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete 400 DI k9
2944	300mm dia. DI k9
2945	250mm dia. DI k9
2946	200mm dia. DI k9Pumpingmain
2947	100mm dia. DI k9 Pumpingmain
2948	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST For scours
2949	250 mm dia 2.00 m long for scours on 400 mm line
2950	150 mm dia 2.00 m long for scours on 250 mm line
2951	150 mm dia2.00 m long for scours on 200 mm line
2952	for sluice valves,non return valves and flow meters 400 mm dia 1.00m long DI DF pipes for sluice and non return valves 3+1+1
2953	300 mm dia 1.00m long DI DF pipes for sluice and non return valves 2+2
2954	250 mm dia 1.00m long DI DF pipes for sluice and non return valves 2+1
2955	200 mm dia 1.00m long DI DF pipes for sluice and non return valves 2+1
2956	100 mm dia 1.00m long DI DF pipes for sluice and non return valves 3
2957	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
2958	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
2959	400mm dia. DI k9 combined Pumpingmain from Proposed 207.98 KLClear water sump to Junction near police station
2960	300mm dia. DI k9 combined Pumpingmainfrom Junction near police station to proposed 1000 KL ELSR Zone-II at Nadim Tiruvuru and existing ELSRS zone -II A and II B
2961	250mm dia. DI k9 combined PumpingmainfromJunction near vignan school to proposed 800 KL ELSR at Raju peta zone-III and existing 200 KL ELSR Rajupeta zone-IIIA
2962	200mm dia. DI k9PumpingmainfromJunction near vignan school to proposed 500 KL ELSR at Patha Tiruvuru zone-II
2963	100mm dia. DI k9 Pumpingmain from proposed 1000 KL ELSR Zone-II at Nadim Tiruvuruto existing250 KL ELSR zone -II A Nadim Tiruvuru
2964	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
2965	400 mm dia DI K9
2966	300 mm dia DI K9
2967	250 mm dia DI K9
2968	200 mm dia DI K9
2969	100 mm dia DI K9
2970	Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16
2971	400 mm dia sluice valves
2972	300 mm dia sluice valves
2973	250 mm dia sluice valves
2974	200 mm dia sluice valves
2975	100 mm dia sluice valves
2976	250 mm dia sluice valves for scour
2977	150 mm dia sluice valves for scour
2978	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
2979	100mm dia. PN 16 on 400 mm dia
2980	80mm dia. PN 16 on 300 mm dia
2981	80mm dia. PN 16 on 250 mm dia
2982	80mm dia. PN 16 on 200 mm dia
2983	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure
2984	100mm dia. PN 16 on 400 mm dia
2985	100mm dia. PN 16 on 300 mm dia
2986	100 mm dia on 250 mm dia valves
2987	100 mm dia on 200 mm dia valves
2988	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16
2989	400mm dia DI
2990	300 mm dia
2991	250mm dia DI
2992	200mm dia DI
2993	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
2994	400mm dia (as per Quotation)
2995	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
2996	400mm dia
2997	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
2998	400 mm dia sluice valves
2999	300 mm dia sluice valves
3000	250 mm dia sluice valves
3001	200 mm dia sluice valves
3002	100 mm dia sluice valves
3003	250 mm dia sluice valves for scour
3004	150 mm dia sluice valves for scour
3005	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc.
3006	100mm dia. PN 16 on 400 mm dia
3007	100mm dia. PN 16 on 300 mm dia
3008	100 mm dia on 250 mm dia valves
3009	100 mm dia on 200 mm dia valves
3010	80mm dia. PN 16 on 300 mm dia
3011	80mm dia. PN 16 on 250 mm dia
3012	80mm dia. PN 16 on 200 mm dia
3013	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
3014	400mm dia
3015	300 mm dia
3016	250 mm dia DI
3017	200 mm dia
3018	150mm dia
3019	100 mm dia
3020	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
3021	400 mm dia
3022	300 mm dia
3023	250 mm
3024	200 mm
3025	150 mm dia
3026	100 mm dia
3027	80 mm dia air valves
3028	Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. For Thrust Blocks at bends and TEEs
3029	Construction of Anchor blockswith M20 concrete using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities. For Anchor Blocks
3030	Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS BT roads restoration
3031	Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work.
3032	For 400mm dia. Sluice Valves and swing check valves
3033	For 300mm dia. Sluice Valves and swing check valves
3034	For 250mm dia. Sluice Valves and swing check valves
3035	For 200mm dia. Sluice Valves and swing check valves
3036	For 100mm dia. Sluice Valves
3037	Construction of Scour Valve chambers with CC M20 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work
3038	For 200mm dia. Scour Valves
3039	For 150mm dia. Scour Valves
3040	Construction of Air Valve chambers with RCC M30 mix suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S
3041	100mm dia. PN 16 on 400 mm dia
3042	100mm dia. PN 16 on 300 mm dia
3043	100 mm dia on 250 mm dia valves
3044	100 mm dia on 200 mm dia valves
3045	80mm dia. PN 16 on 300 mm dia
3046	80mm dia. PN 16 on 250 mm dia
3047	80mm dia. PN 16 on 200 mm dia
3048	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5 For Thrust Blocks
3049	Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
3050	Manufacture, Supply and delivery of MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and transportation charges etc., complete
3051	400mm dia
3052	300mm dia
3053	250mm dia
3054	200mm dia
3055	Manufacture, supply and delivery at work site 400mm dia internal dia M.S.Pipe fabricated with 10mm thick MS plates confirming to IS 2062-1992 of grade A manufactured as per IS 3589-2001in suitable lengths to suit the sit conditionse , in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –charge
3056	Construction wash water recirculation of 6.50m dia sump(79.70 KL) atWTP Tiruvuru
3057	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth
3058	for wash water recirculation sump foundations 0-3.00m Machanical means
3059	forwash water recirculation sump foundations 3.00-6.00m Machanical means
3060	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
3061	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
3062	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer
3063	Raft
3064	For side walls circular 0.30m thick below GL
3065	For side walls circular 0.30m thick above GL
3066	Columns 0.30 x 0.30m 3.60-0.30
3067	Roof beams
3068	Roof slab0.15m thick 0.786x(7.10^2-2.70^2)
3069	Roof dome slab 0.15m thick
3070	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
3071	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
3072	Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
3073	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost
3074	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
3075	Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator
3076	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches. Mechanical means
3077	Manual
3078	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1)
3079	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking, excluding GST,etc complete 100mm dia. DI k9 Pumpingmain
3080	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST100 mm dia 1.00m long DI DF pipes for sluice and non return valves 1+1
3081	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
3082	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
3083	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. -100mm dia
3084	Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16
3085	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16
3086	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
3087	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-500mm dia
3088	100 mm dia
3089	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
3090	500 mm dia
3091	250 mm dia
3092	100 mm dia
3093	Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
3094	Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work.Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3095	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
3096	Manufacture, Supply and delivery of CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and transportation charges etc., complete.unit each .
3097	Supply and erection of 2# of 1.49KW(2.00HP) CF Pumpsets each with a duty of 7 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation
3098	Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc. 2# of 1.49KW(2.00HP) CF Pumpsets each with a duty of 7 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recurculation
3099	Construction of electrician / operator/watchmanquarters at HWW Tiruvuru
3100	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
3101	Mechanical means
3102	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
3103	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
3104	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
3105	b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
3106	c) Plinth beam
3107	d) Lintle beamsWindows
3108	e) Roof Beams
3109	f) Roof slab0.125m thick with 0.30m extension all sides
3110	g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
3111	h) Loft slab 0.075m thick kitchen
3112	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
3113	1st floor
3114	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
3115	1st floor
3116	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
3117	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
3118	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
3119	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoor -D - 1.20X2.10 m
3120	DoorsD1 -1.00X2.10m
3121	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
3122	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
3123	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
3124	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
3125	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
3126	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
3127	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
3128	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
3129	Providing Electrification
3130	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
3131	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
3132	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
3133	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
3134	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
3135	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
3136	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
3137	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
3138	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
3139	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
3140	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
3141	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
3142	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
3143	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
3144	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
3145	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
3146	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
3147	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke
3148	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
3149	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
3150	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
3151	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
3152	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
3153	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
3154	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
3155	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
3156	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
3157	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
3158	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
3159	15 mm dia nominal bore -for internal
3160	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
3161	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
3162	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
3163	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
3164	S& F GI union Ist Quality 12.70mm
3165	19.05mm
3166	25.40mm
3167	For septic Tank
3168	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
3169	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
3170	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
3171	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
3172	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
3173	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
3174	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
3175	Errection of 315 KVA Transformer at at Head Water Works Tiruvuru with Transformer yard 15.00x12.00m
3176	Supply and erection of 7.5m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
3177	Supply of 11 KV 200A Gang operated Air break disconnecting switch complete with tandom bar, operating pipe, handle with badlock arrangements, 11 KV insulators etc
3178	Supply and erection of 11 KV Horn gap fuse units complete with insulators, arcing horn etc.,
3179	Supply and erection of 9 KV 5 KA auto valve distribution class lighting arresters suitable for use on 3 Ph. 11 KV 50 Hz system.
3180	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
3181	Supply and erection of 11 KV Pin Inuslators complete with GI pins and top clamps
3182	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
3183	Providing stay sets for thestructures complete with stay wire 11 KV guy insulators. Stay rod bow, thimble etx.,
3184	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
3185	A) Earth Electrodes
3186	B) 25 x 3 mm HDB copper flat
3187	C) Epoxy insulators
3188	D) No.\"8\" SWG Copper wire.
3189	Supply and erection of 315KVA, 11KV/433 V, DY-11 Vectro group, out door type, plinth mounting type, Hint /make transformer with bushings on HT side and cable entry box on L V side to received 1.1 KV grade cable with all standard accessories transformer oil. tansformer having copper wound natural cooled with all standard accessories - ELEC-6.4.34 eRate as SSR 2017-18
3190	Supply and laying of 3.5 core x 400 sq.mm, 1.10 KV grade PVC insulated and armoured cable with alminium conductorsELEC-4.1.46 Rate as per building SSR 2017-18 Rs 1667.00+13.615%=Rs 1893.96
3191	MAIN PANEL, BOARD.LT Sheet steelclad, free standing, floor mounting unitized, Duat and vermin proof Indoor, Cubicle powder coated panel board made out of 16 SWG CRCA sheet sheetable for use 3 ph, 440v, 50 Hz. System and comprising, complete with busbars of adeeequate capacity, interconnections,control wiring etc..as required.
3192	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
3193	Incoming a) . 630A TPN SFU for main switch
3194	b) . 630 A pole change over switch
3195	c) one setMetering Panel Comprisinga). 1( 0-500V) 96mm.SQ.flush type Digital Voltmeter.
3196	d) 3 way any off Voltmeter Selector Switch
3197	e). ( 0-250A) 96mm SQ.flush type digital Ammeter
3198	f). 3 way any off Ammeter Selector
3199	g).3RYB Phase indication lamps with leds
3200	h).3-200/5A ration bar primary type current tranformers. (Alluminium busbar)
3201	OUT GOING: 250A TPN SFUs for CW pump house motors.
3202	250 A TPN SFUs for compressor/mechanical equipments
3203	250 A TPN SFUs for low lift sump Raw water motors.
3204	160 A TPN SFUs for Space
3205	160a TPN SFUs fir lighting section
3206	160 A 4 poles change over switch for lighting section
3207	.KWH digital meter fro lighting section
3208	4 nos-32 amps TPN Switch with HRC fuses and 1 No.10 KVAR capacitor bank total KVAR-40
3209	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
3210	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
3211	315KV.LT/Transformer transportation, Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
3212	Supply and Laying of 3C X 70Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.
3213	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
3214	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
3215	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
3216	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM25 design mix concrete
3217	column footings
3218	Columns1.20-0.10-0.10-0.30+1.80
3219	Plinth beam2(15+12)=54-gate3.00=51.00
3220	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
3221	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
3222	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
3223	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
3224	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
3225	supply and filling the transformer yard with 40mm HBG metal m/c
3226	Laying of 800mm dia.(10 mm thick plate) for NH crossings atNational High way at Tiruvuru for clear water pumping main 400 mm dia
3227	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but including cost of encasing pipe - 800mm dia
3228	Construction of Compound wall to head water works 430m three sidescompound wall and one side 280mbarbed wire fencing
3229	Constuction of compound wall with the following specifications1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
3230	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
3231	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
3232	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
3233	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
3234	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
3235	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretecolumn footings
3236	Columns
3237	Plinth beam
3238	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
3239	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
3240	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
3241	Providing approach road to HWW at Tiruvuru(Metal road)
3242	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth
3243	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using Gravel
3244	Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller 80-100 kN / Vibratory Roller to achieve thedesired density, complete as per Technical Specification Clause 401 MORD / MORTH.RBR-SBBS-1 For Grading II Material (CBR Value minimum 25)
3245	Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost,seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (4th revision) for finished item of work. (Payment based on levels for finished item of work)
3246	Construction of balance 1000 KLELSR with 18m stagingat Nadim Tiruvuru zone -I
3247	Construction of balance 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 on Zone-II.Left Over Works
3248	Construction of 1000 KLELSR with 18m stagingat Pata Tiruvuruzone -II
3249	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 on Zone-II.
3250	Construction of 1000 KLELSR with 18m stagingat Rajupeta zone -III
3251	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 on Zone-II.
3252	Implementation of Environmental Management plan
3253	Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations)once in a month duringthe Pre-Construction periodand once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
3254	Noiselevel(5Monitoringstations)onceina season during the Pre-Construction period and once in a season forthree seasons (10Monitoringstations) during the constructionperiodat Intake well,Sump& PH,FiltrationPlant/WTP,ELSRs,Pipelines &Distribution network
3255	Water Quality Monitoring surface / ground(5 Monitoring stations)once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during theconstructionperiod atIntakewell,Sump&PH,Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
3256	Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)
3257	Cutting of Trees and removal
3258	Greenbelt development and maintenance in the surroundings / Buffer zone as per approved drawing
3259	Health checkups and free medical distribution
3260	Awareness program/training
3261	Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism: Sprinkling of watertwice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of watertwice in a day for 1 vehicles x 100 days (excluding rainy days) during Operationalphase.
3262	Project Information Boards - Setting up of Sign boards, Posters, barricades etc.
3263	Hiring ofVehicle (1 No.) for 36 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
3264	Hiring for 1 No Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
3265	Construction of Clear Water SCADA Room 8.00 x 12.00 Size.
3266	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
3267	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
3268	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
3269	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
3270	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
3271	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
3272	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings
3273	Pedastals around Columns
3274	Columns Up to plinth
3275	Plinth Beams 300 x 400
3276	Columns
3277	Up to First Floor Roof Level
3278	Beams 230 x 500
3279	1st floor
3280	Lintels
3281	1st floor
3282	Sunshades
3283	1st floor
3284	Staircase slab 0.15 m thick
3285	First Floor to Second Floor
3286	RCC Slab 150mm thick
3287	1st floor
3288	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
3289	First Floor
3290	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).
3291	For First Floor Level
3292	11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.
3293	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3294	For First Floor
3295	Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of
3296	First Floor
3297	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3298	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3299	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
3300	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
3301	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
3302	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3303	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3304	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3305	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
3306	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
3307	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
3308	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
3309	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
3310	Providing electrification
3311	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
3312	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
3313	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
3314	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
3315	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
3316	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
3317	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
3318	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
3319	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
3320	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
3321	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
3322	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
3323	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
3324	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
3325	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
3326	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k
3327	WS and anitery arrengements
3328	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
3329	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
3330	SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
3331	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
3332	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
3333	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
3334	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
3335	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
3336	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
3337	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
3338	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
3339	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
3340	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines and inlet
3341	20 mm dia nominal bore -fromjn forof individual lines to toilets
3342	15 mm dia nominal bore -for internal
3343	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
3344	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
3345	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
3346	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
3347	12.70mm
3348	19.05mm
3349	25.40mm
3350	Instrumantation and Automation of the Pumping System: Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
3351	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3352	Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties
3353	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
3354	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
3355	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. 400MM Dia Above Specification.
3356	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. 300MM Dia Above Specification.
3357	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. 350MM Dia Above Specification.
3358	Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
3359	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
3360	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
3361	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
3362	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3363	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
3364	Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.
3365	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 100MM Dia Above Specification.
3366	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 150MM Dia Above Specification
3367	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 150MM Dia Above Specification
3368	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.100MM Dia Above Specification.
3369	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.150MM Dia Above Specification.
3370	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.200MM Dia Above Specification.
3371	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 100MM Dia Above Specification.
3372	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 150MM Dia Above Specification.
3373	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 200MM Dia Above Specification.
3374	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.100MM Dia Above Specification.
3375	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.150MM Dia Above Specification.
3376	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.200MM Dia Above Specification.
3377	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3378	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
3379	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
3380	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3381	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
3382	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3383	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3384	Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3385	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3386	24 x 7 Water Supply ::DMA Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.200MM Dia Above Specification.
3387	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
3388	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
3389	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3390	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
3391	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
3392	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3393	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3394	Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3395	Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
3396	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
3397	AMI Water Meter Management. Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A.
3398	Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-BUnder DMA-1under 800 KL ELSR at R&B Guest house with above specifications
3399	Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.
3400	Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
3401	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
3402	Establishment of HARDWARE for Central Control Station at Individual Circle Supply,erection, testing, commissioning of Hard ware for the SCADA system for Central control stationwhere the SCADA room will be developed by the local Circle for operting & View from Service Reservoirs, DMAand AMI meter management for entire circle where the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
3403	AMR Water Meter Management System: Providing, deploy and Run the AMR software to collect the data from all AMR integrated Mechanical water Meters Installed in field with the specifications of provide mobile app to get the field data of consumer including geo mapping to synchronize with AMR software, the AMR software must have the capability to decrypt the received data from water meter and ensure data integrity, the software shall give output, at least in the CSV (Comma Separated Value)/ txt/ xls format,the AMR software must be capable of running on any standard PC/ MAC/Android/iOS devices, the AMR software should be cloud based and should have web portal access so that user can view customer data through browser, the AMR software should have an option for individual customer to view their meter consumption data through Web portal/ Mobile APP of Android or iOS, the AMR software shall allow the PC operator to review and edit any account in the AMR software, the AMR software should have the facility to export CSV/Txt/xls files in the pre-defined format by utility to billing system, the AMR software shall enable the client to specify the data to be exported from the database for transferring to billing system, the AMR Software shall be able to show meter status as meter not okay, reading not reliable, meter maintenance required etc., the AMR software should have capability to add additional customer information and create customizable data fields, the AMR software should manage GPS data of AMR Meters, the AMR Software have facility to generate customized MIS reports, the AMR software can store the historical data up to minimum two years, the AMR software have to generate the alarms /alerts regarding abnormalities of the Water Meter, the AMR software have data integrity feature with standard industrial security protocol, the Mobile App having the facility to configure the AMR water meter via Bluetooth, the AMR software have facility to generate the NRW reports by synchronizing the data from SCADA software, the AMR software have facility to generate the Consumption/Billing alerts via SMS / What’s App / e-Mail, AMR software needs to follow responsive software guidelines by Indian government, AMR software should have an option to create multiple users, AMR software should implement permission managemtnt for users - so that user can access only permitted Modules / Screens, AMR software should have Block IP mechanism, AMR software has to protected from DDOS attacks, AMR software should be implemented with Less latency standard industrial technologies, the information transfer from database to application should be done in a secured channel charges including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officerNote: Detailesd technical specifications enclosed as Anexure-C
3404	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Central control stationwhere the SCADA room will be developed by the Circle for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
3405	Construction of Clear Water centralised SCADA Room 8.00 x 12.00 Size.
3406	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
3407	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
3408	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
3409	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
3410	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
3411	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
3412	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings
3413	Pedastals around Columns
3414	Columns Up to plinth
3415	Plinth Beams 300 x 400
3416	Columns
3417	Up to First Floor Roof Level
3418	Beams 230 x 500
3419	1st floor
3420	Lintels
3421	1st floor
3422	Sunshades
3423	1st floor
3424	Staircase slab 0.15 m thick
3425	First Floor to Second Floor
3426	RCC Slab 150mm thick
3427	1st floor
3428	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
3429	First Floor
3430	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).
3431	For First Floor Level
3432	11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.
3433	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3434	For First Floor
3435	Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of
3436	First Floor
3437	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3438	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
3439	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
3440	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
3441	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
3442	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3443	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3444	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
3445	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
3446	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
3447	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
3448	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
3449	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
3450	Providing electrification
3451	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
3452	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
3453	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
3454	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
3455	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
3456	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
3457	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
3458	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
3459	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
3460	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
3461	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
3462	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
3463	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
3464	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
3465	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
3466	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k
3467	WS and anitery arrengements
3468	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
3469	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
3470	SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
3471	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
3472	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
3473	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
3474	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
3475	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
3476	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
3477	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
3478	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
3479	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
3480	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines and inlet
3481	20 mm dia nominal bore -fromjn forof individual lines to toilets
3482	15 mm dia nominal bore -for internal
3483	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
3484	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
3485	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
3486	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
3487	12.70mm
3488	19.05mm
3489	25.40mm
3490	II Distribution network
3491	Laying new Distribution lineszone-I
3492	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
3493	Manual means 30%
3494	Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling
3495	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
3496	160mm dia.
3497	200mm dia.
3498	250mm dia.
3499	315mm OD
3500	355mm OD
3501	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
3502	110mm dia.
3503	160mm dia.
3504	160 mm dia for Air TEEs
3505	200mm dia.
3506	200 mm dia for Air TEEs
3507	250mm dia.
3508	250 mm dia for Air TEEs
3509	315mm OD
3510	315mm OD for Air TEEs
3511	355mm OD
3512	355 mm dia for Air TEEs
3513	355 mm dia for Air TEEs
3514	b) MS Flanges
3515	110mm dia.
3516	160mm dia.
3517	160 mm dia for Air TEEs
3518	200mm dia.
3519	200 mm dia for Air TEEs
3520	250mm dia.
3521	250 mm dia for Air TEEs
3522	315mm OD
3523	315mm OD for Air TEEs
3524	355mm OD
3525	355 mm dia for Air TEEs
3526	355 mm dia for Air TEEs
3527	c) End Caps
3528	110mm dia.
3529	160mm dia.
3530	200mm dia.
3531	d) Reducers
3532	110X125 mmdia
3533	125x140 mm dia
3534	140x160 mm dia
3535	160x180 mm dia
3536	180x200 mm dia
3537	200x225 mm dia
3538	225x250 mm dia
3539	250x280 mm dia
3540	280x315 mm dia
3541	315x355 mm dia
3542	e) TEES
3543	110mm dia.
3544	160mm dia.
3545	200mm dia.
3546	250mm dia.
3547	315 mm dia.
3548	355 mm dia
3549	F)Bends
3550	110mm dia.
3551	160mm dia.
3552	200mm dia.
3553	250mm dia.
3554	315 mm dia.
3555	355 mm dia
3556	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
3557	160mm dia.
3558	200mm dia.
3559	250mm dia.
3560	315mm OD
3561	355mm OD
3562	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
3563	100X2.00m on 110 dia mains for scours
3564	100X2.00m on 160 dia mains for scours
3565	100x1.00m long DF pipes for sluice valves
3566	150X2.00mon 200 mm dia mains for scours
3567	150X2.00mon 250 mm dia mains for scours
3568	150x1.00m long DF pipes for sluice valves
3569	200x1.00m long DF pipes for sluice valves
3570	250x1.00m long DF pipes for sluice valves
3571	300x1.00m long DF pipes for sluice valves
3572	350x1.00m long DF pipes for sluice valves
3573	350x1.00m long DF pipes for for bulk flow meter
3574	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
3575	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
3576	100 mm distrubution
3577	150mm dia for distrubution
3578	200mm dia for distrubution
3579	250mm dia for distrubution
3580	300mm dia for distrubution
3581	350mm dia for distrubution
3582	100mm diaon 110 mmdia mains
3583	100mm diaon160 mm dia mains
3584	150 mm dia on 200 mm dia lines
3585	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN1680 mm dia on 110 mm pipe, 80 mm dia on 160 mm pipe, 80mm dia 250 mm pipe, 80mm dia 355 mm pipe
3586	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
3587	100 mm distrubution
3588	150mm dia for distrubution
3589	200mm dia for distrubution
3590	250mm dia for distrubution
3591	300mm dia for distrubution
3592	350mm dia for distrubution
3593	350mm dia for bulk flow meter
3594	100mm diaon 110 mmdia mains
3595	100mm diaon160 mm dia mains
3596	150 mm dia on 200 mm dia lines
3597	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
3598	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3599	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3600	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3601	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3602	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m)
3603	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
3604	350mm dia for bulk flow meter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
3605	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
3606	for scours - 100mm diaon 110 mm and 160 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
3607	for scours - 150mm diaon 110 mm and 200 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
3608	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
3609	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 200 mm pipe
3610	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 250 mm pipe
3611	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.80x1.60x1.40m size) - 80 mm dia on 315 mm pipe
3612	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.80x1.60x1.40m size) - 80 mm dia on 355 mm pipe
3613	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
3614	150 mm dia
3615	200 mm dia
3616	250 mm dia
3617	300 mm dia
3618	350 mm dia
3619	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
3620	80 mm dia
3621	100 mm dia
3622	150 mm dia
3623	200 mm dia
3624	250 mm dia
3625	300 mm dia
3626	350 mm dia
3627	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3628	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3629	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3630	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
3631	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
3632	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
3633	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
3634	Laying new Distribution lineszone-IA
3635	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
3636	Manual means 30%
3637	Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge
3638	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
3639	160mm dia.
3640	200mm dia.
3641	250mm dia.
3642	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
3643	110mm dia.
3644	160mm dia.
3645	160 mm dia for Air TEEs
3646	250mm dia.
3647	250 mm dia for bulk flow meter
3648	b) MS Flanges
3649	110mm dia.
3650	160mm dia.
3651	160 mm dia for Air TEEs
3652	250mm dia.
3653	250 mm dia for bulk flow meter
3654	c) End Caps
3655	110mm dia.
3656	160mm dia.
3657	d) Reducers
3658	110X125 mmdia
3659	125x140 mm dia
3660	140x160 mm dia
3661	160x180 mm dia
3662	180x200 mm dia
3663	200x225 mm dia
3664	225x250 mm dia
3665	e) TEES
3666	110mm dia.
3667	160mm dia.
3668	200mm dia.
3669	250mm dia.
3670	F)Bends
3671	110mm dia.
3672	160mm dia.
3673	200mm dia.
3674	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
3675	160mm dia.
3676	200mm dia.
3677	250mm dia.
3678	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
3679	100X2.00m on 110 dia mains for scours
3680	100x1.00m long DF pipes for sluice valves
3681	150x1.00m long DF pipes for sluice valves
3682	250x1.00m long DF pipes for sluice valves
3683	250x1.00m long DF pipes for bulk flow meter
3684	350x1.00m long DF pipes for sluice valves
3685	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves - 100 mm dia deck foot bends, 150 mm dia deck foot bends
3686	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
3687	100 mm distrubution
3688	150mm dia for distrubution
3689	250mm dia for distrubution
3690	for scour -100mm diaon 110 mm and 160 mm dia mains
3691	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe,
3692	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
3693	100 mm distrubution
3694	150mm dia for distrubution
3695	250mm dia for distrubution
3696	250mm dia for bulk flow meter
3697	for scour100mm diaon 110 mm dia mains
3698	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
3699	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3700	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3701	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3702	250mm dia for bulk flowmeter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3703	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
3704	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
3705	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
3706	150 mm dia
3707	250 mm dia
3708	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
3709	80 mm dia
3710	100 mm dia
3711	150 mm dia
3712	250 mm dia
3713	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3714	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3715	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3716	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
3717	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
3718	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make - 250 mm
3719	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
3720	Laying new Distribution lineszone-IB
3721	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
3722	Manual means 30%
3723	Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Charge
3724	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
3725	160mm dia.
3726	200mm dia.
3727	250mm dia.
3728	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
3729	110mm dia.
3730	160mm dia.
3731	160 mm dia for Air TEEs
3732	200 mm dia.
3733	200 mm dia for Air TEEs
3734	250mm dia.
3735	250 mm dia for bulk flow meter
3736	b) MS Flanges
3737	110mm dia.
3738	160mm dia.
3739	160 mm dia for Air TEEs
3740	200 mm dia.
3741	200 mm dia for Air TEEs
3742	250mm dia.
3743	250 mm dia for bulk flow meter
3744	c) End Caps
3745	110mm dia.
3746	160mm dia.
3747	d) Reducers
3748	110X125 mmdia
3749	125x140 mm dia
3750	140x160 mm dia
3751	160x180 mm dia
3752	180x200 mm dia
3753	200x225 mm dia
3754	225x250 mm dia
3755	e) TEES
3756	110mm dia.
3757	160mm dia.
3758	200mm dia.
3759	250mm dia.
3760	F)Bends
3761	110mm dia.
3762	160mm dia.
3763	200mm dia.
3764	250mm dia.
3765	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
3766	160mm dia.
3767	200mm dia.
3768	250mm dia.
3769	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
3770	100X2.00m on 110 dia mains for scours
3771	100X2.00m on 160 dia mains for scours
3772	100x1.00m long DF pipes for sluice valves
3773	150x1.00m long DF pipes for sluice valves
3774	200x1.00m long DF pipes for sluice valves
3775	250x1.00m long DF pipes for sluice valves
3776	250x1.00m long DF pipes for bulk flow meter
3777	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves - 100 mm dia deck foot bends, 150 mm dia deck foot bends
3778	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
3779	100 mm distrubution
3780	150mm dia for distrubution
3781	200mm dia for distrubution
3782	250mm dia for distrubution
3783	100mm diaon 110 mmdia mains
3784	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe,
3785	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
3786	100 mm distrubution
3787	150mm dia for distrubution
3788	200mm dia for distrubution
3789	250mm dia for distrubution
3790	250mm dia for bulkflow meter
3791	for scour100mm diaon 110 mm dia mains
3792	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
3793	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3794	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3795	200mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3796	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3797	250mm dia for bulk flowmeter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3798	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
3799	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
3800	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m) - 80 mm dia on 200 mm pipe
3801	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
3802	150 mm dia
3803	200 mm dia
3804	250 mm dia
3805	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
3806	80 mm dia
3807	100 mm dia
3808	150 mm dia
3809	200 mm dia
3810	250 mm dia
3811	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3812	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3813	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3814	Filling crushur stone dustin pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
3815	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
3816	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make - 250 mm
3817	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
3818	Laying new Distribution lineszone-II
3819	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
3820	Manual means 30%
3821	Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Chargeg
3822	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
3823	160mm dia.
3824	200mm dia.
3825	250mm dia.
3826	315mm OD
3827	355mm OD
3828	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
3829	110mm dia.
3830	160mm dia.
3831	160 mm dia for Air TEEs
3832	200mm dia.
3833	200 mm dia for Air TEEs
3834	250mm dia.
3835	250 mm dia for Air TEEs
3836	315mm OD
3837	315mm OD for Air TEEs
3838	355mm OD
3839	355 mm dia for Air TEEs
3840	355 mm dia for Air TEEs
3841	b) MS Flanges
3842	110mm dia.
3843	160mm dia.
3844	160 mm dia for Air TEEs
3845	200mm dia.
3846	200 mm dia for Air TEEs
3847	250mm dia.
3848	250 mm dia for Air TEEs
3849	315mm OD
3850	315mm OD for Air TEEs
3851	355mm OD
3852	355 mm dia for Air TEEs
3853	355 mm dia for Air TEEs
3854	c) End Caps
3855	110mm dia.
3856	160mm dia.
3857	200mm dia.
3858	d) Reducers
3859	110X125 mmdia
3860	125x140 mm dia
3861	140x160 mm dia
3862	160x180 mm dia
3863	180x200 mm dia
3864	200x225 mm dia
3865	225x250 mm dia
3866	250x280 mm dia
3867	280x315 mm dia
3868	315x355 mm dia
3869	e) TEES
3870	110mm dia.
3871	160mm dia.
3872	200mm dia.
3873	250mm dia.
3874	315 mm dia.
3875	355 mm dia
3876	F)Bends
3877	110mm dia.
3878	160mm dia.
3879	200mm dia.
3880	250mm dia.
3881	315 mm dia.
3882	355 mm dia
3883	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
3884	160mm dia.
3885	200mm dia.
3886	250mm dia.
3887	315mm OD
3888	355mm OD
3889	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
3890	100X2.00m on 110 dia mains for scours
3891	100X2.00m on 160 dia mains for scours
3892	100x1.00m long DF pipes for sluice valves
3893	150 mm dia x2.00m on 200 and 200 mm dia pipes for scours
3894	150 mm dia x2.00m on 200 and 250 mm dia pipes for scours
3895	150x1.00m long DF pipes for sluice valves
3896	200x1.00m long DF pipes for sluice valves
3897	250x1.00m long DF pipes for sluice valves
3898	300x1.00m long DF pipes for sluice valves
3899	350x1.00m long DF pipes for sluice valves
3900	350x1.00m long DF pipes for for bulk flow meter
3901	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
3902	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
3903	100 mm distrubution
3904	150mm dia for distrubution
3905	200mm dia for distrubution
3906	250mm dia for distrubution
3907	300mm dia for distrubution
3908	350mm dia for distrubution
3909	for scour -100mm diaon 110 mm
3910	for scour -100mm diaon 160 mm
3911	150 mm dia on 200dia lines
3912	150 mm dia on 250 mm dia lines
3913	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN1680 mm dia on 110 mm pipe, 80 mm dia on 160 mm pipe, 80mm dia 250 mm pipe, 80mm dia 355 mm pipe
3914	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
3915	100 mm distrubution
3916	150mm dia for distrubution
3917	200mm dia for distrubution
3918	250mm dia for distrubution
3919	300mm dia for distrubution
3920	350mm dia for distrubution
3921	350mm dia for bulk flow meter
3922	100mm diaon 110 mmdia mains
3923	100mm diaon160 mm dia mains
3924	150 mm dia on 200 mm dia lines
3925	150 mm dia on 250mm dia lines
3926	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
3927	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3928	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
3929	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3930	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
3931	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m)
3932	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
3933	350mm dia for bulk flow meter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
3934	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
3935	for scours - 100mm diaon 110 mm and 160 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
3936	for scours - 100mm diaon 150 mm and 200 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
3937	for scours - 100mm diaon 150 mm and 250 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
3938	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
3939	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 200 mm pipe
3940	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 250 mm pipe
3941	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.80x1.60x1.40m size) - 80 mm dia on 315 mm pipe
3942	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.80x1.60x1.40m size) - 80 mm dia on 355 mm pipe
3943	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
3944	150 mm dia
3945	200 mm dia
3946	250 mm dia
3947	300 mm dia
3948	350 mm dia
3949	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
3950	80 mm dia
3951	100 mm dia
3952	150 mm dia
3953	200 mm dia
3954	250 mm dia
3955	300 mm dia
3956	350 mm dia
3957	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3958	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3959	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
3960	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
3961	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
3962	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make -350mm
3963	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
3964	Laying new Distribution lineszone-III
3965	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
3966	Manual means 30%
3967	Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Chargeg
3968	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
3969	160mm dia.
3970	200mm dia.
3971	250mm dia.
3972	315mm OD
3973	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
3974	110mm dia.
3975	160mm dia.
3976	160 mm dia for Air TEEs
3977	200mm dia.
3978	200 mm dia for Air TEEs
3979	250mm dia.
3980	250 mm dia for Air TEEs
3981	315mm OD
3982	315mm OD for bulk flow meter
3983	b) MS Flanges
3984	110mm dia.
3985	160mm dia.
3986	160 mm dia for Air TEEs
3987	200mm dia.
3988	200 mm dia for Air TEEs
3989	250mm dia.
3990	250 mm dia for Air TEEs
3991	315mm OD
3992	315mm OD for bulk flow meter
3993	c) End Caps
3994	110mm dia.
3995	160mm dia.
3996	d) Reducers
3997	110X125 mmdia
3998	125x140 mm dia
3999	140x160 mm dia
4000	160x180 mm dia
4001	180x200 mm dia
4002	200x225 mm dia
4003	225x250 mm dia
4004	250x280 mm dia
4005	280x315 mm dia
4006	e) TEES
4007	110mm dia.
4008	160mm dia.
4009	200mm dia.
4010	250mm dia.
4011	315 mm dia.
4012	F)Bends
4013	110mm dia.
4014	160mm dia.
4015	200mm dia.
4016	250mm dia.
4017	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
4018	160mm dia.
4019	200mm dia.
4020	250mm dia.
4021	315mm OD
4022	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
4023	100X2.00m on 110 dia mains for scours
4024	100X2.00m on 160 dia mains for scours
4025	100x1.00m long DF pipes for sluice valves
4026	150x1.00m long DF pipes for sluice valves
4027	200x1.00m long DF pipes for sluice valves
4028	250x1.00m long DF pipes for sluice valves
4029	300x1.00m long DF pipes for sluice valves
4030	300x1.00m long DF pipes for sluice valves
4031	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
4032	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
4033	100 mm distrubution
4034	150mm dia for distrubution
4035	200mm dia for distrubution
4036	250mm dia for distrubution
4037	300mm dia for distrubution
4038	for scour -100mm diaon 110 mm
4039	for scour -100mm diaon 160 mm
4040	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN1680 mm dia on 110 mm pipe, 80 mm dia on 160 mm pipe, 80mm dia 250 mm pipe, 80mm dia 355 mm pipe
4041	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
4042	100 mm distrubution
4043	150mm dia for distrubution
4044	200mm dia for distrubution
4045	250mm dia for distrubution
4046	300mm dia for distrubution
4047	300mm dia for bulk flow meter
4048	100mm diaon 110 mmdia mains
4049	100mm diaon160 mm dia mains
4050	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
4051	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
4052	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
4053	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
4054	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
4055	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m)
4056	300mm dia for bulk flow meter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
4057	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
4058	for scours - 100mm diaon 110 mm and 160 mm dia mains - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
4059	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
4060	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 200 mm pipe
4061	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 250 mm pipe
4062	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
4063	150 mm dia
4064	200 mm dia
4065	250 mm dia
4066	300 mm dia
4067	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
4068	80 mm dia
4069	100 mm dia
4070	150 mm dia
4071	200 mm dia
4072	250 mm dia
4073	300 mm dia
4074	350 mm dia
4075	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4076	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4077	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4078	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
4079	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
4080	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make -350mm
4081	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
4082	Laying new Distribution lineszone-IIIA
4083	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
4084	Manual means 30%
4085	Providing bedding with sandfor pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification anddirected by the Engineer - in - Chargeg
4086	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
4087	160mm dia.
4088	200mm dia.
4089	250mm dia.
4090	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck
4091	110mm dia.
4092	160mm dia.
4093	160 mm dia for Air TEEs
4094	200mm dia.
4095	200 mm dia for Air TEEs
4096	250mm dia.
4097	250 mm dia for Air TEEs
4098	250 mm dia for bulk flow meter
4099	b) MS Flanges
4100	110mm dia.
4101	160mm dia.
4102	160 mm dia for Air TEEs
4103	200mm dia.
4104	200 mm dia for Air TEEs
4105	250mm dia.
4106	250 mm dia for Air TEEs
4107	250 mm dia for bulk flow meter
4108	c) End Caps
4109	110mm dia.
4110	160mm dia.
4111	250mm dia.
4112	315 mm dia.
4113	d) Reducers
4114	110X125 mmdia
4115	125x140 mm dia
4116	140x160 mm dia
4117	160x180 mm dia
4118	180x200 mm dia
4119	200x225 mm dia
4120	225x250 mm dia
4121	e) TEES
4122	110mm dia.
4123	160mm dia.
4124	200mm dia.
4125	250mm dia.
4126	F)Bends
4127	110mm dia.
4128	160mm dia.
4129	200mm dia.
4130	250mm dia.
4131	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
4132	160mm dia.
4133	200mm dia.
4134	250mm dia.
4135	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours
4136	100X2.00m on 110 dia mains for scours
4137	100x1.00m long DF pipes for sluice valves
4138	150x1.00m long DF pipes for sluice valves
4139	200x1.00m long DF pipes for sluice valves
4140	250x1.00m long DF pipes for sluice valves
4141	250x1.00m long DF pipes for bulk flow meter
4142	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
4143	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 -
4144	100 mm distrubution
4145	150mm dia for distrubution
4146	200mm dia for distrubution
4147	250mm dia for distrubution
4148	for scour -100mm diaon 110 mm
4149	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside c, 80mm dia 200 mm pipeolour blue. Drilled as per IS:1538. PN1680 mm dia on 110 mm pipe, 80 mm dia on 160 mm pipe, 80mm dia 250 mm pipe, 80mm dia 355 mm pipe
4150	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.
4151	100 mm distrubution
4152	150mm dia for distrubution
4153	200mm dia for distrubution
4154	250mm dia for distrubution
4155	250mm dia for bulk flowmeter
4156	100mm diaon 110 mmdia mains
4157	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
4158	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
4159	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m)
4160	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
4161	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
4162	250mm dia for bulkmeter - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
4163	for scours - 100mm diaon 110 mm and 110 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.60x1.60x1.20m size) size)
4164	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.50x1.3x1.20m size) - 80 mm dia on 160 mm pipe
4165	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 200 mm pipe
4166	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.40x1.30m size) - 80 mm dia on 250 mm pipe
4167	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
4168	150 mm dia
4169	200 mm dia
4170	250 mm dia
4171	350 mm dia
4172	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
4173	80 mm dia
4174	100 mm dia
4175	150 mm dia
4176	200 mm dia
4177	250 mm dia
4178	350 mm dia
4179	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4180	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4181	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4182	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
4183	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
4184	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make - 250mm
4185	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
4186	Providing 15mm diaNew House service connections and trasferring existing House Service connections
4187	Providing House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½”(20mmOD )MDPE pipe and other side with female threaded off-takewith SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½”(20mmOD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe ofspecified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) 40 mm UPVC pipe for drain crossingand as per Technical Specification
4188	Providing house service connections at house holds side in earthern roads
4189	Providing house service connections at other side in earthern roads
4190	Providing house service connections at HHside in BT &CCroads
4191	Providing house service connections at otherside in BT &CCroads
4192	1.1: Environmental Management Plan During Implementation and Operation Phases (AS PER ANNEXURE-IV)
4193	Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations)once in a month duringthe Pre-Construction periodand once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
4194	Noiselevel(5Monitoringstations)onceina season during the Pre-Construction period and once in a season forthree seasons (10Monitoringstations) during the constructionperiodat Intake well,Sump& PH,FiltrationPlant/WTP,ELSRs,Pipelines &Distribution network
4195	Water Quality Monitoring surface / ground(5 Monitoring stations)once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during theconstructionperiod atIntakewell,Sump&PH,Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
4196	Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)
4197	Cutting of Trees and removal
4198	Greenbelt development and maintenance in the surroundings / Buffer zone as per approved drawing min 750 Sqm
4199	Health checkups and free medical distribution
4200	Awareness program/training
4201	Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism:Sprinkling of watertwice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of watertwice in a day for 1 vehicles x 100 days (excluding rainy days) during Operationalphase.
4202	Project Information Boards - Setting up of Sign boards, Posters, barricades etc.
4203	Providing Technical Diploma Engineer for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge.
4204	Provision for Technical Person (Graduate Engineering) to integrate existing & Proposed system Coordinate with ULB, implementing agency and Contractor - For 2 year
4205	Manning, Operation and Maintenance ofTiruvuruNagara Panchayat Water Supply Improvements Scheme for 7 years
4206	Personal required for operating Intake/Offtake well/Pump houses Operator
4207	Personal required for operating Intake/Offtake well/Pump housesFitter/Helper
4208	Personal required for operating Intake/Offtake well/Pump houses Watch man
4209	Personal required at operating Raw water rising mains Fitter/Helper
4210	Personal required at operating Water treatment plants & Sump Operator
4211	Personal required at operating Water treatment plants & Sump Fitter/Helper
4212	Personal required at operating Water treatment plants & Sump Elecrician / Mechanic
4213	Personal required at operating Water treatment plants & Sump Lab Tecnician
4214	Personal required at operating distribution system Fitter/Helper
4215	A) Chlorine gas for Disinfection @ 3 mg/Lt Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines 1st year
4216	B) Alumino -Ferric (Alum) @ 20 mg/Lt Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement a1st year
4217	Repairs to pumpsets & Water pipe lines (2 years after execution period) i) Replacement of bearings of pumpsets
4218	iv)Replacement of glands of sluice valves
4219	v) Replacements of balls of Air valves
4220	vi) Greease
4221	vii) Gland Packing
4222	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 250 mm HDPE Pipes
4223	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 200 mm HDPE Pipes
4224	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 160 mm HDPE Pipes
4225	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 110 mm HDPE Pipes
4226	LOCAL SCADA at ULB LEVEL Jr. Service Engineer (Diploma Engineer) Rate as per Labour Rates LAB-00127 of CSSR 2025-26
4227	Data Operator Rate as per Labour Rates LAB-00134 ofCSSR 2025-26
4228	Office assistant, Rate as per Labour Rates LAB-00124 ofCSSR 2025-26
4229	II) MAINTAINANCE OF LOCAL CONTROL STATION : SCADA Replacement of necessary servicable materials(Reagents) for Chlorine Analysers *Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuet Clear Water outlet of Water Treatment plant Inlet of 1000 KL ProposedELSR atTiruvuru(Metal road) Inlet of1000 KLProposed ELSR atNadim Tiruvuru zone -I Inlet of 1000 KL existing at at Rajupeta zone -IIII
4230	Replacement of necessary tranducers for PH analysers Clear Water outlet of Water Treatment plant(Re-imbersable on submission of Proof of Payment)
4231	Replacement of necessary tranducers for Turbidity analysers Clear Water outlet of Water Treatment plant
4232	BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment) GPRS Connections WTP Quality Management ELSR Management DMA Management
4233	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)
4234	CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA Man PowerApplication Engineer,(Graduate Engineer) To monitor all issues related to both operation & service
4235	System Engineer,(Graduate Engineer) To monitor all meters location through SCADA station and give feedback to the service engineers.
4236	Sr. Service Engineer (Graduate Engineer ) To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns
4237	Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.
4238	Office assistant,To assist the entire team, dispatches and also maintain SCADA station clean and neat
4239	II) MAINTAINANCE OF LOCAL CONTROL STATION :16 out of 84 Months BSNL Charges for static IPInterconnection for Data receive station from all Local Contol RTU panels.
4240	Data base management for WEB reportingData storage and reporting system for view through WEB and Mobile networks
4241	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)
4242	NANDIGAMA MUNICIPALITY
4243	Item No#1.Construction of 9.00m. dia. (143 KL) Intake well cum Pump House in Krishna River bed at Gudimetla
4244	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts a) Up to 2.00mdepth from +26.00 m to +24.00m
4245	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsb) 2.00m to 4.00m depth from +24.00m to +22.00m
4246	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsc) 4.00m to 6.00m depth from +22.00m to +20.00m
4247	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsd) 6.00m to 8.00m depth from +20.00m to +18.00m
4248	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtse) 8.00m to 10.00m depth from +18.00m to +16.00m
4249	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsf) 10.00m to 11.00m depth from + 16.00m to +15.00m
4250	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsg) 11.00m to 12.00 depth from +15.00m to +14.00m depth
4251	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsh) 12.00m to 13.00m from +14.00m to +13.00m depth
4252	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsi) 13.00m to 14.00m from +13.00 m to +12.00m depth
4253	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsj) 14.00m to 15.00mfrom +12.00m to +11.00m depth
4254	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsk) 15.00m to 16.00m from +11.00m to +10.00m depth
4255	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts l) 16.00m to 17.00 m depth from +10.00m to +9.00m depth
4256	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsl) 17.00m to 18.00 m depth from +9.00m to +8.00m depth
4257	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mtsl) 18.00m to 19.00 m depth from +8.00m to +7.61m depth
4258	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts l) 19.00m to 20.00 m depth from +7.00m to +6.61m depth
4259	Providing C.C.mix (M15 grade in open foundations from approved quarries including cost & conveyance of all materials,all labour charges for machine mixing, laying, vibrating, tamping and curing including all delifts etc., complete as per S.S and as directed by the departmental authorities.
4260	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Well Curb0.50m thick
4261	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Side walls (Well Steining)
4262	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+28.00-+27.00)
4263	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)Side Wallof the Well of 0.50M thick upto HFL (+29.00-+28.00)
4264	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+30.00-+29.00)
4265	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+31.00-+30.00)
4266	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+31.00-+30.00)
4267	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+33.00-+32.00)
4268	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+34.00-+33.00)
4269	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wallof the Well of 0.50M thick upto HFL (+35.00-+34.00
4270	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)Side Wallof the Well of 0.50M thick upto HFL (+36.00-+35.00)
4271	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wall of the Well of 0.30M thick above HFL (37.00-36.00 = 1.00)
4272	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wall of the Well of 0.30M thick above HFL (38.00-37.00 = 1.00)
4273	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)a) for Pump house Columns (8+3)
4274	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Centre Beams
4275	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) c) for Floor Slab 0.25 m thick including 1.00m walk way
4276	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) d) for Lintel Beams alround
4277	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) e) for Roof Beams
4278	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) f) for Roof slab 0.125m thick 0.45m extension
4279	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end
4280	Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.Sfor Super structure of Pump house
4281	Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.S for Pump house Parapet wall
4282	Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S
4283	Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house
4284	Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house b) for Parapet wall
4285	Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903)
4286	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for ceiling
4287	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
4288	Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201)
4289	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
4290	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30
4291	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities
4292	Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities.
4293	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
4294	Supply and delivery of \"Resilient Seated SoftSealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15or GGG-50/SG-500/7 or Equivalent as perIS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without glandpacking with 3-O ring protection system on theShaft and Seals of NBR. The Valves should beVacuum tight and 100% leak proof with face toface dimensions as BS:5163 Type A/IS:14846. Allthe valves should be with fusion bondedElectrostatic Powder coating both inside andoutside (Min 250 Microns)- RAL 5005 withPocket Less Straight through body Passageconforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS- 1538 excluding all taxes, duties Drilled as per IS:1538. PN16 including Transportation
4295	Supply and delivery of 350mm dia. 2.0m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) endsof K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
4296	Supply and delivery of SS/C.I/M.S 12.00m. long operating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities.
4297	Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab
4298	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
4299	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges
4300	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
4301	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
4302	supply andrun of 2 of36/0.3 mm. (2.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
4303	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
4304	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
4305	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
4306	Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
4307	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
4308	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
4309	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
4310	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
4311	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
4312	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
4313	Labour charges Fixing of 20W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
4314	Item No#2.Construction ofService Bridge for intake well in Gudimetla
4315	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH a) Upto Initial Liftof 3.00mts
4316	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
4317	Laying of VCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S
4318	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
4319	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)a) For columns
4320	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) b) For Carriage Slab Beams
4321	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) c) For Carriage Slab 0.20m thick
4322	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
4323	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
4324	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
4325	Item No#3.Providing temporory Island for preparatory platform for sinking of intake well in Krishna River
4326	Providing and construction of temporary island of 16Mt. diameter for preparation of platform etc. for construction of well foundation for 8m internal dia. Intake well as per Tech. Specification 1203 MORTH.for Intake well 8.00 m diadepth of water 4.00 m and height of island 4.50 m.
4327	Formation of bund/approach ramp with Gravel/Quarry spall from approved quarry including cost and conveyance of all materials and labour charges for formation of protection bund by filling, sectioning, levelling, compacting etc.complete as per S.S
4328	Item No#4.Construction of staff Quarters at proposed intake well
4329	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
4330	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
4331	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4332	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
4333	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
4334	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
4335	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
4336	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
4337	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
4338	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
4339	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
4340	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
4341	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
4342	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
4343	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
4344	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
4345	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
4346	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
4347	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
4348	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
4349	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
4350	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
4351	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
4352	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
4353	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
4354	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
4355	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
4356	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
4357	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
4358	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
4359	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
4360	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
4361	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
4362	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
4363	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
4364	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
4365	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
4366	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
4367	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
4368	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
4369	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
4370	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
4371	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
4372	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
4373	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
4374	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
4375	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
4376	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
4377	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
4378	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
4379	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
4380	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
4381	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
4382	S& F GI union Ist Quality 12.70mm
4383	S& F GI union Ist Quality 19.05mm
4384	S& F GI union Ist Quality 25.40mm
4385	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
4386	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
4387	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4388	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
4389	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
4390	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
4391	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
4392	Item No#5.Providing Site filling to the proposed site to be developed for Transformer, and Staff Quarters at proposed site of intake well
4393	Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost,and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.
4394	Item No#6.Providing 500mm,dia.DI K9 Raw Water pumping main for pumping of RawwaterfromRaw water intake well at River Krishna Gudimetla village to proposed 10 MLD WTP
4395	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.
4396	Filling with crusher stone dustin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
4397	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete - 500 mm dia DI K9
4398	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 500 mm dia DI K9
4399	Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 -500 mm dia DI K9
4400	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.250mm dia 2.00m long DI DF pipes for scour
4401	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.500mm dia 2.00m long DI DF pipes at intake well cum pump house
4402	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 500mm dia 1.00m long DI DF pipes for sluiceand check valves 8+2
4403	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
4404	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. - 250mm dia
4405	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 500 mm dia
4406	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 - a) 500 mm dia
4407	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85b) 250 mm dia
4408	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85c) 150 mm dia
4409	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and st - a) 250mm Ø DI D/F valve - PN16 for scour acking care fully at site etc.complete as per S.S
4410	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and st -b) 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves
4411	Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes andtransportation, etc complete ISI marked PN 1.6 (MPa) -500mm Ø DI D/F valve - PN16
4412	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S -150mm dia. PN16
4413	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure - 150mm dia. PN16
4414	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. - 500mm dia
4415	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 500mm dia
4416	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 250 mm dia
4417	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 150 mm dia
4418	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 150 mm dia
4419	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
4420	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20
4421	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
4422	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 2.1x2.1x1.80 Mts size) -500mm dia
4423	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size) -250 mm dia
4424	Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work - For 150 mm dia. Air ValvesConstruction ofVRCCair valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of1.80 x2.0x1.30m size) -150 mm dia
4425	Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches.
4426	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4427	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4428	Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS
4429	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. (CC pavement)
4430	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete-500 mm dia
4431	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe - 800mm dia
4432	Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, but including taxes & duties, etc. outer 800mm dia 10 mm thick
4433	Item No#7.Supply and erection of 3# of 72.00 Kw VT Pumpsets each with a duty of 63 LPS and a total head of 82m(Two simaltaneouslyworking and one stand bye)for pumping of Raw water from Intake well to proposed 10.50 MLD WTP
4434	Supply and delivery electrically driven horizontal foot mounted heavy duty ball bearing type vertical centrifugal raw pump sets 3# of 72.00 Kw VT Pumpsets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 63 LPS at total head of 82m. operated at required RPM coupled tosuitablemotor for operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete. for pumping of raw water including errection and testingDesign, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.The cost includes necessary cables,earthen arrengements,inlet,out let arrengements,manifold arrengements,DI sluice valves,non return valves,air and air release valves,capacitors
4435	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
4436	Item No#8.Errection of 500 KVA transformer at intake well with Transformer yard 15.00x12.00m
4437	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
4438	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
4439	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
4440	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
4441	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
4442	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
4443	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
4444	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
4445	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below A) Earth Electrodes
4446	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
4447	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below C) Epoxy insulators
4448	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below D) No.\"8\" SWG Copper wire. MAT 04141 1.
4449	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes :As per list of recommended brands as category I. MAT-04046e500 KVAQuantity : 1 2. Rated KVA :500 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth.5. Wound :CopperDouble wound 6. Type : Core type oil immersed 7. Cooling :ONAN 8. TempRise : 40⁰C in oil 45⁰C by resistance 9. Vector Group:Dyn 11 10. Primary Connection :Delta 11. Nominal Voltage / Current : ______ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires:3 16. Secondary connection : Star 17. SecondaryVolts / Current :433V 18. Secondary phases :3 19. Secondary wires:4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the site condition.b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing.23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats 24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats 25. Percentage Impedance at 75 deg C AT 4.5 26. No load Current Less than 2% of full load Current27. Standrad Fittings & Accessories.a. Rating and terminal marking plate: Oneb. Lifting Lugs:Twod. EarthingTerminals:Two e. Radiators ( Attachable):Adequatef.Explosion vent with Diaphragm :Oneg. Conservator with Drain plug:one h. Oil filling hole with cap :One i.Oil level indicator : Onej.Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Boxl. Terminal Arrangement : LV Cable Boxm. Separate Neutral Bushing: Onen. Filter valve with blanking plate : Oneo. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : Oner. Four :Unidirectional flat rollerss. One :10Cm dial thermometer(Rigid stem type)
4450	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
4451	LT panel Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
4452	LT panel Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
4453	Incoming a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4454	Incoming b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
4455	Incoming c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
4456	Incoming d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
4457	Incoming e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
4458	Incoming f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
4459	Incoming g).3RYB Phase indication lamps with leds
4460	Incoming h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
4461	Out-Going 630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4462	Out-Going 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4463	Out-Going 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4464	Out-Going 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4465	Out-Going 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4466	Out-Going 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
4467	Out-Going KWH digital meter fro lighting section
4468	Out-Going Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
4469	Out-Going Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
4470	Out-Going Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
4471	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete
4472	Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03459
4473	Transformer yardEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
4474	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
4475	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4476	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work column footings
4477	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Columns
4478	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Plinth beam2(15+12)=54-gate3.00=51.00
4479	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities
4480	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4481	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
4482	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
4483	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
4484	supply and filling the transformer yard with 40mm HBG metal m/c
4485	Item No # 9.Supply Installation Testing of 320 KVA Generator at intake well
4486	Supply Installation Testing And commissioning of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self-regulated, self-excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection (over voltage, over speed & under voltage). Diesel Engine: It shall have residential silencer, up to 10 M exhaustpiping, electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5 KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM,Ammeter, Voltmeter, Frequency Meter or Multi-function meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied with initial filling of fuel, lube oil, coolant oil as per OEM specifications and shall be tested at site. Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183. The doors are fabricated from 1.6 mm CRCA sheet packed with acoustic material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete asThe enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, PF meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure, visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in all respect of following capacity: 320 kVA at 0.8 pf 415V 50Hz 3-ØMAT04509
4487	Item No # 10.Providing Site filling to the proposed site to be developed for Transformer,and Staff Quarters at proposed site of WTP
4488	Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost,and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.
4489	Item No # 11.Construction of 10.00 MLD Rapid Gravity Filtration Plant
4490	Design and Construction of 10.00 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using Gravel & sand as filter media, compatible duly following relevant CHPEEO Manual & IS codes in the design of plant components taking in to consideration 25% overloading including chlorine contact tankand including trial running for 90 days etc.,as per the appended Technical Specification of the tender document and also as per specifications of PHSSR 2018-19. All valves in the Filtration Plant should be compatable for operation with motorised Actuators integrated to SCADA
4491	Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation,taxes,duties etc
4492	Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation,taxes,duties etc1.00 length vertical from WTP
4493	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
4494	Supply and delivery of\"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation - 300mm dia
4495	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves as per technical specification-300mm dia
4496	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2- 300mm dia
4497	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.- 300mm dia
4498	Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means. 300mm dia pipeline trench
4499	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification 300mm dia pipeline trench
4500	Construction of CC Sluice Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work- 300 mm diaConstruction ofVRCC M-20 valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification (For 1.70x1.70x1.40m Mts size)
4501	Item No # 12.Construction 12.50 m dia clear water sump at proposed WTP Head Works(294.75 KL)
4502	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--upto 3m depth
4503	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 3-6.00m depth by manual means
4504	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
4505	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
4506	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer a) Raft slab
4507	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer b) For side walls circular 0.30m thick initial height 3.00 mbelow GL
4508	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer c) For side walls circular 0.30m thick above GL
4509	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer d) Columns0.30 x 0.30 ,
4510	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer e) Roof Beams
4511	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer f) Roof slab0.15m thick 0.786*(13.10^2-6.00^2)
4512	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer g) Roof dome slab 0.15m thick
4513	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
4514	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
4515	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
4516	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4517	Item No#13.Construction wash water recirculation of 7.00 m dia sump(92.43 KL) atWTP Nandigama
4518	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthMachanical means 0-3.00m
4519	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 4m depthMachanical means 3.00-6.00m
4520	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
4521	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
4522	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer Raft
4523	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick below GL
4524	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick above GL
4525	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer Columns 0.30 x 0.30m 3.60-0.30
4526	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer Roof beams
4527	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer Roof slab0.15m thick 0.786x(7.10^2-2.70^2)
4528	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer Roof dome slab 0.15m thick
4529	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
4530	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
4531	Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
4532	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4533	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
4534	Item No#14.Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator
4535	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches.
4536	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1)
4537	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking, excluding GST,etc complete
4538	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST100 mm dia 1.00m long DI DF pipes for sluice and non return valves 1+1
4539	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
4540	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
4541	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
4542	Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16100 mm dia
4543	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16100 mm dia
4544	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
4545	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.500mm dia
4546	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.100mm dia
4547	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85500 mm dia
4548	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85250 mm dia
4549	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85100 mm dia
4550	Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
4551	Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work.
4552	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
4553	Manufacture, Supply and delivery of CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and transportation charges etc., complete.unit each .
4554	Item No#15.Supply and erection of 2# of 1.50 KW(2.00HP) CF Pumpsets each with a duty of 7.5 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation
4555	Supply and erection of 2# of 1.50 KW(2.00HP) CF Pumpsets each with a duty of 7.50 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recurculation Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.The pumps should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 35LPS at total head of 44.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, delivery , ganrty arrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. 2# of 1.5 KW(2.00HP) CF Pumpsets each with a duty of 7.50 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recurculation
4556	Item No # 16.Providing 250mm,dia.DI K9 clear Water pumping main for pumping of clearwaterfromclear water sump at WTP to proposed 1000 KL ELSR Anasagaram(Zone - IV)
4557	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.
4558	Filling with crusher stone dustin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
4559	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking,CED,etc complete - 250mm dia
4560	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-250mm dia
4561	Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 - 250 mm dia
4562	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.
4563	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
4564	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
4565	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85- 250mm dia
4566	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85- 80 mm dia
4567	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S - 250mm dia
4568	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S - 250mm dia
4569	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. - 250mm dia
4570	Supply, delivery of Electromagnetic flow meter of various sizes as per ISO 9001:2008 manufacturer; Flow meter tube: SS304; Flange:CS DIN PN 10;Liner:Hard rubber suitable for drinking water approval;Measuring Electordes : SS316; Grounding Ring:SS316; Coil Housing: SS304; Junction Box : SS304; Ingress Protction :IP68; Flow transmitter :Microprocessor based; Accuracy :0.5% of measured value for velocities for 0.5 m/sec flow rate and above; Cable between Flow head & Transmitter : 25 Mts Display: backlit LCD with 8 digit totaliser; Surge Arrestor : To be provided; Power Supply : 230 V AC; SCADA/Web Based Data Aquisition System : Electromagnetic flowmeter should be SCADA/Web Based Compatible; Meter Flow test lab certification from : NABL/FCRI, Flow test lab should have three times better accuracy than the uncertainity/Accuracy of the electromagnetic flowmeters; etc., excluding taxes and duties with 2 years warranty. (Make:Krohne Marshall/ Emerson/Siemens/Yokowaga/ Endress Hausar rate as per Telengana SSR 2017-18 - 250mm dia
4571	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes - 250 mm dia
4572	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. -250mm dia
4573	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
4574	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
4575	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20
4576	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
4577	Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work Construction ofVRCC M-20 valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification (For 1.60x1.60x1.30m size)
4578	Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workConstruction ofVRCC M-20 valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification (For 1.60x1.40x1.30m size)
4579	Cutting of existing B.T.road surface (aswell as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches.
4580	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4581	Cutting and open of Water bound macadam surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4582	Collection ,supply,spreading and compaction of crusher stone dust including curing as per SS
4583	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
4584	Manufacture, Supply and delivery of MS/CI. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete
4585	Item No#17.Providing 350mm ,300 mm,200mm ,100 mm diaD.I. K9clear water pumping mains fromfromclear water sump at WTP to proposedto Proposed 800 KL ELSRat B.C Colony zone-III,Existing 250KL and proposed 850 KL ELSR atBackside of Nagarpanchayat office Zone-II,Proposed 700 KLELSR atMukkapati Nagar Zone-I
4586	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.
4587	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
4588	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes ofK9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. 350 mm dia DI K9
4589	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes ofK9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. 300 mm dia DI K9
4590	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes ofK9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. 250 mm dia DI K9
4591	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes ofK9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities. 100 mm dia DI K9 from proposed 850 KL ELSR to existing 250 KL ELSR
4592	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.400 mm dia DI K9
4593	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 300 mm dia DI K9
4594	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 250 mm dia DI K9
4595	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 100 mm dia DI K9 from proposed 850 KL ELSR to existing 250 KL ELSR
4596	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. -350mm dia
4597	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. 300 mm dia DI K9
4598	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. 250 mm dia DI K9
4599	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. 100 mm dia DI K9 from proposed 850 KL ELSR to existing 250 KL ELSR
4600	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.a) for scour 200 mm dia on 350mmlines
4601	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. b) for scour 150 mm dia on 250mmlines
4602	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. c) 350 mm dia DIDF Pipes 1.00m long
4603	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. d) 300 mm dia DIDF Pipes 1.00m long
4604	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. e) 250 mm dia DIDF Pipes 1.00m long
4605	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. f) 100 mm dia DIDF Pipes 1.00m long
4606	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
4607	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. a) for 350 mm dia Pumping main
4608	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 b) for 300 mm dia Pumping main
4609	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 c) 250 mm dia Pumping main
4610	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 d) 200 mm dia
4611	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 e) 150 mm dia
4612	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 f) 100 mm dia
4613	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85a) 350 mm dia
4614	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 b) for 300 mm dia Pumping main
4615	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 c) 250 mm dia Pumping main
4616	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 d) 200 mm dia
4617	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 e) 150 mm dia
4618	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 f) 100 mm dia
4619	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 g) 80 mm dia
4620	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.Sa) 350mm Ø DI D/F valve - PN16 formain,Atstating 1+in between A & C 1+ for scour 1
4621	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S b) 300mm Ø DI D/F valve - PN16 formain in between C & E 1
4622	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S c) 250mm Ø DI D/F valve - PN16 formain in between C & D,E& F, E& G 1 +1+1+ for scour 1
4623	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S d) 100mm Ø DI D/F valve - PN16 for existing 250 KL ELSR
4624	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S e) 100 mm diafor 350 mm dia air valves
4625	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S for scour 200 mm dia on 350mmlines
4626	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S for scour 150 mm dia on 250mmlines
4627	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 80mm dia. PN16 on 250 mm dia for isolating air valves
4628	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 80mm dia. PN16 on 300 mm dia for isolating air valves
4629	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 100mm dia. PN16 on 350 mm dia for isolating air valves
4630	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S80mm dia. PN16 on 250 mm dia
4631	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S 80mm dia. PN16 on 300 mm dia
4632	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S 100mm dia. PN16 on 350 mm dia
4633	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.-350 mm dia
4634	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes 300 mm dia
4635	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes 250 mm dia
4636	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressureeach-for water hammer control Test preddure 15 kgs/sqcm - 100 mm dia on 350 mm dia
4637	Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressureeach-for water hammer control Test preddure 15 kgs/sqcm 100 mm dia on 250 mm dia
4638	Supply, delivery of Electromagnetic flow meter of various sizes as per ISO 9001:2008 manufacturer; Flow meter tube: SS304; Flange:CS DIN PN 10;Liner:Hard rubber suitable for drinking water approval;Measuring Electordes : SS316; Grounding Ring:SS316; Coil Housing: SS304; Junction Box : SS304; Ingress Protction :IP68; Flow transmitter :Microprocessor based; Accuracy :0.5% of measured value for velocities for 0.5 m/sec flow rate and above; Cable between Flow head & Transmitter : 25 Mts Display: backlit LCD with 8 digit totaliser; Surge Arrestor : To be provided; Power Supply : 230 V AC; SCADA/Web Based Data Aquisition System : Electromagnetic flowmeter should be SCADA/Web Based Compatible; Meter Flow test lab certification from : NABL/FCRI, Flow test lab should have three times better accuracy than the uncertainity/Accuracy of the electromagnetic flowmeters; etc., excluding taxes and duties with 2 years warranty. (Make:Krohne Marshall/ Emerson/Siemens/Yokowaga/ Endress Hausar rate as per Telengana SSR 2017-18-350 mm dia
4639	Supply, delivery of Electromagnetic flow meter of various sizes as per ISO 9001:2008 manufacturer; Flow meter tube: SS304; Flange:CS DIN PN 10;Liner:Hard rubber suitable for drinking water approval;Measuring Electordes : SS316; Grounding Ring:SS316; Coil Housing: SS304; Junction Box : SS304; Ingress Protction :IP68; Flow transmitter :Microprocessor based; Accuracy :0.5% of measured value for velocities for 0.5 m/sec flow rate and above; Cable between Flow head & Transmitter : 25 Mts Display: backlit LCD with 8 digit totaliser; Surge Arrestor : To be provided; Power Supply : 230 V AC; SCADA/Web Based Data Aquisition System : Electromagnetic flowmeter should be SCADA/Web Based Compatible; Meter Flow test lab certification from : NABL/FCRI, Flow test lab should have three times better accuracy than the uncertainity/Accuracy of the electromagnetic flowmeters; etc., excluding taxes and duties with 2 years warranty. (Make:Krohne Marshall/ Emerson/Siemens/Yokowaga/ Endress Hausar rate as per Telengana SSR 2017-18 250 mm dia
4640	Supply, delivery of Electromagnetic flow meter of various sizes as per ISO 9001:2008 manufacturer; Flow meter tube: SS304; Flange:CS DIN PN 10;Liner:Hard rubber suitable for drinking water approval;Measuring Electordes : SS316; Grounding Ring:SS316; Coil Housing: SS304; Junction Box : SS304; Ingress Protction :IP68; Flow transmitter :Microprocessor based; Accuracy :0.5% of measured value for velocities for 0.5 m/sec flow rate and above; Cable between Flow head & Transmitter : 25 Mts Display: backlit LCD with 8 digit totaliser; Surge Arrestor : To be provided; Power Supply : 230 V AC; SCADA/Web Based Data Aquisition System : Electromagnetic flowmeter should be SCADA/Web Based Compatible; Meter Flow test lab certification from : NABL/FCRI, Flow test lab should have three times better accuracy than the uncertainity/Accuracy of the electromagnetic flowmeters; etc., excluding taxes and duties with 2 years warranty. (Make:Krohne Marshall/ Emerson/Siemens/Yokowaga/ Endress Hausar rate as per Telengana SSR 2017-18 100 mm dia
4641	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes - 350 mm dia
4642	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes 250 mm dia
4643	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes 100 mm dia
4644	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. -350 mm dia
4645	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 300 mm dia
4646	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 250 mm dia
4647	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 200 mm dia
4648	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 150 mm dia
4649	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 100 mm dia
4650	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 80mm dia. PN16 on 250 mm dia for isolating air valves
4651	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 80mm dia. PN16 on 300 mm dia for isolating air valves
4652	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 100mm dia. PN16 on 350 mm dia for isolating air valves
4653	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.-80mm dia
4654	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete 100 mm dia
4655	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
4656	Construction of Anchor blockswith C.C. (1:2:4) nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities.
4657	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
4658	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification-350 mm dia - (1.70x1.70x1.40m)
4659	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification 300 mm dia
4660	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification 250 mm dia (1.60x1.60x1.30m)
4661	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification 200 mm dia (1.60x1.60x1.30m)
4662	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification 150 mm dia (1.60x1.60x1.20m)
4663	Construction of CC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification 100 mm dia
4664	Construction of CC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification -350 mm dia (1.90x1.60x1.40m)
4665	Construction of CC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification on 300 mm line 80 mm dia (1.90x1.60x1.40m)
4666	Construction of CC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification on 250 mm line 100mm dia (1.60x1.40x1.30m)
4667	Construction of CC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of workConstruction ofVRCC M25 Sluice/Scour valve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M25 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification on 250 mm line 80 mm dia (1.60x1.40x1.30m)
4668	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4669	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4670	Cutting and open of WBM. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
4671	Filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-stone dust filling for road restoration
4672	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
4673	Manufacture, Supply and delivery of MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and including transportation charges etc., complete -350 mm dia
4674	Manufacture, Supply and delivery of MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and including transportation charges etc., complete 300 mm dia
4675	Manufacture, Supply and delivery of MS/CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and including transportation charges etc., complete 250 mm dia
4676	Item No#18.Supply and erection of 2# of 14.92 Kw CF Pumpsets Each with a duty of 35 LPS and a total head of 28m (one working and one stand bye)forpumping of Clearwaterfrom from proposed clear water sump of WTPto proposed 1000KL ELSRAnasagaram(Zone - IV)
4677	Supply, delivery and erection of 2# of 14.92 Kwelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 35 LPS at total head of 28.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.The rate includes inlet,out let arrengements,manifolds,DI sluice valves,non return valves,air valves,MS/DI specials,earthening arrengements, capacitors, cables,foot valves,
4678	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
4679	Item No#19.Supply and erection of 3# of 22.38 Kw CF Pumpsets Each with a duty of 43 LPS and a total head of 34m (two working and one stand bye) for pumping of Clearwaterfrom from proposed clear water sump of WTPtoProposed 800 KL ELSRat B.C Colony zone-III,Existing 250KL and proposed 600 KL ELSR atBackside of Nagarpanchayat office Zone-II and Proposed 700 KLELSR atMukkapati Nagar Zone-I
4680	Supply, delivery and erection of 3# of 22.38 Kwelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 43 LPS at total head of 34.00m. operated at required RPM coupledfor operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate including all taxes and duties etc.complete with suction, deliveryarrengements,DI valves,DI and MS specials,gauges,panel board for motors, capacitors, startes, earthening arrengements, change over switch,bed blocks under pumps,valves,suitable cables etc complete for finished item of work. Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.The rate includes inlet,out let arrengements,manifolds,DI sluice valves,non return valves,air valves,MS/DI specials,earthening arrengements, capacitors, cables,foot valves,
4681	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
4682	Item No#21.Errection of 315 KVA transformer at WTP with Transformer yard 15.00x12.00m
4683	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
4684	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
4685	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
4686	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
4687	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
4688	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
4689	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
4690	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
4691	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below A) Earth Electrodes
4692	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
4693	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below C) Epoxy insulators
4694	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below D) No.\"8\" SWG Copper wire. MAT 04141 1.
4695	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04045D315 KVA : 1 2. Rated KVA : 315 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth.5. Wound :CopperDouble wound 6. Type : Core type oil immersed 7. Cooling :ONAN 8. TempRise : 40⁰C in oil 45⁰C by resistance 9. Vector Group:Dyn 11 10. Primary Connection :Delta 11. Nominal Voltage / Current : ______ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires:3 16. Secondary connection : Star 17. SecondaryVolts / Current :433V 18. Secondary phases :3 19. Secondary wires:4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the site condition.b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing.23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats 24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats 25. Percentage Impedance at 75 deg C AT 4.5 26. No load Current Less than 2% of full load Current27. Standrad Fittings & Accessories.a. Rating and terminal marking plate: Oneb. Lifting Lugs:Twod. EarthingTerminals:Two e. Radiators ( Attachable):Adequatef.Explosion vent with Diaphragm :Oneg. Conservator with Drain plug:one h. Oil filling hole with cap :One i.Oil level indicator : Onej.Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Boxl. Terminal Arrangement : LV Cable Boxm. Separate Neutral Bushing: Onen. Filter valve with blanking plate : Oneo. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : Oner. Four :Unidirectional flat rollerss. One :10Cm dial thermometer(Rigid stem type)
4696	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
4697	LT panel Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
4698	LT panel Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03979
4699	Incoming a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4700	Incoming b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
4701	Incoming c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
4702	Incoming d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
4703	Incoming e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
4704	Incoming f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
4705	Incoming g).3RYB Phase indication lamps with leds
4706	Incoming h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
4707	Out-Going 630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4708	Out-Going 630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4709	Out-Going 630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4710	Out-Going 630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4711	Out-Going 630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
4712	Out-Going 630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
4713	Out-Going KWH digital meter fro lighting section
4714	Out-Going Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
4715	Out-Going Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
4716	Out-Going Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
4717	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete
4718	Supply and Laying of 3C X 70Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458
4719	Transformer yardEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
4720	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
4721	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4722	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work column footings
4723	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Columns
4724	RCC M-20 Design Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Plinth beam2(15+12)=54-gate3.00=51.00
4725	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities
4726	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4727	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
4728	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
4729	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
4730	supply and filling the transformer yard with 40mm HBG metal m/c
4731	Item No#22.Construction of staff Quarters at proposed WTP
4732	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places
4733	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
4734	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4735	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix column footings
4736	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m
4737	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam
4738	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beamsWindows
4739	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams
4740	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab0.125m thick with 0.30m extension all sides
4741	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows
4742	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen
4743	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssa) Ground Floor
4744	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss 1st floor
4745	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor
4746	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor
4747	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
4748	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
4749	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
4750	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoors -D - 1.20X2.10 m
4751	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoorsD1 -1.00X2.10m
4752	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workwindows 1.20x1.20
4753	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of workToilet door D2
4754	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
4755	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
4756	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
4757	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
4758	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
4759	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
4760	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
4761	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
4762	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
4763	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
4764	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
4765	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
4766	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
4767	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
4768	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
4769	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
4770	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
4771	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
4772	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
4773	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
4774	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
4775	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
4776	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
4777	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
4778	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines
4779	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
4780	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
4781	S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
4782	b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
4783	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
4784	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
4785	S& F GI union Ist Quality 12.70mm
4786	S& F GI union Ist Quality 19.05mm
4787	S& F GI union Ist Quality 25.40mm
4788	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations
4789	Filling with sandin foundations /pipe linetrenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
4790	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4791	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
4792	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
4793	RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shutteringfor cover slabs
4794	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.
4795	Item No#23.Construction of pump house 15.0mx7.50m at head water works
4796	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
4797	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
4798	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4799	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concrete Column footings
4800	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretePedestals
4801	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteColumns
4802	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretePlinth beam
4803	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteLintel beams
4804	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteRoof Beams
4805	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteRoof slab0.125m thick,
4806	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteSunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
4807	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss a) Ground floor
4808	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss b)1st floor Parapet wall
4809	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & insidea) Ground floor
4810	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & insideb)1st floor
4811	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
4812	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
4813	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
4814	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
4815	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Windows1.50x1.20m
4816	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4817	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
4818	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
4819	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
4820	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
4821	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
4822	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
4823	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
4824	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
4825	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
4826	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
4827	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
4828	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
4829	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
4830	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
4831	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
4832	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
4833	Item No#20.Supply Installation Testing of 250 KVA Generator at Head Water Works
4834	Supply Installation Testing And commissioning of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self-regulated, self-excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection (over voltage, over speed & under voltage). Diesel Engine: It shall have residential silencer, up to 10 M exhaustpiping, electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5 KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM,Ammeter, Voltmeter, Frequency Meter or Multi-function meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied with initial filling of fuel, lube oil, coolant oil as per OEM specifications and shall be tested at site. Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183. The doors are fabricated from 1.6 mm CRCA sheet packed with acoustic material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete asThe enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, PF meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure, visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in all respect of following capacity: specified by the OEM along with warranty for two years. 250 kVA at 0.8 pf 415V 50Hz 3-Ø MAT - 04508
4835	Item No#24.Providing Service roads at Proposed head water works
4836	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using gravel
4837	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using crusher stone dust
4838	Item No#25.Providing Compound wall at Head water works
4839	Constuction of compound wall with the following specifications 1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
4840	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
4841	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
4842	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
4843	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
4844	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
4845	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretecolumn footings
4846	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concreteColumns
4847	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM25 design mix concretePlinth beam
4848	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
4849	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
4850	Item No#26.Construction of 1000 KL capacity ELSR 18m staging Mukkapati Nagar zone-I
4851	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 @Construction of 1000 KL capacity ELSR 18m staging Mukkapati Nagar zone-Ipacities above 1000KL i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material, For 800 KL to 1500 Kl ELSRs, Inlet Pipe - 400mm dia, Out let Pipe - 450mm dia, DI valves – 2 No’s, Over Flow pipe - 450m dia, Scour Pipe - 200mm dia, a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers- CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4No - RCC Finial ventilator with fly/bird protection with GI mesh - 1 No, RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No etc as per Tender document
4852	Item No#27.Construction of 1000 KL capacity ELSR 18m staging Back side of Nagara panchayat office zone-II
4853	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 @Construction of 1000 KL capacity ELSR 18m staging Back side of Nagara panchayat office zone-IIpacities above 1000KL i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material, For 800 KL to 1500 Kl ELSRs, Inlet Pipe - 400mm dia, Out let Pipe - 450mm dia, DI valves – 2 No’s, Over Flow pipe - 450m dia, Scour Pipe - 200mm dia, a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers- CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4No - RCC Finial ventilator with fly/bird protection with GI mesh - 1 No, RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No etc as per Tender document
4854	Item No#28.Construction of 1000 KL capacity ELSR 18m staging BC Colonyzone-III
4855	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 @Construction of 1000 KL capacity ELSR 18m staging BC Colonyzone-IIIpacities above 1000KL i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material, For 800 KL to 1500 Kl ELSRs, Inlet Pipe - 400mm dia, Out let Pipe - 450mm dia, DI valves – 2 No’s, Over Flow pipe - 450m dia, Scour Pipe - 200mm dia, a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers- CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4No - RCC Finial ventilator with fly/bird protection with GI mesh - 1 No, RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No etc as per Tender document
4856	Item No#29.Construction of 1000 KL capacity ELSR 18m staging Anasagaram zone-IV
4857	Design and Construction of 1000 KL Capacity M30 Grade desing mix VRCC ELSR 18Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.mand as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2024-25 @Construction of 1000 KL capacity ELSR 18m staging Anasagaram zone-IVpacities above 1000KL i) Pipe connections & Specials with D.I materials(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided with D/F DI material.(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty confirming to the specification of SoR item No.28(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall be of DI material, For 800 KL to 1500 Kl ELSRs, Inlet Pipe - 400mm dia, Out let Pipe - 450mm dia, DI valves – 2 No’s, Over Flow pipe - 450m dia, Scour Pipe - 200mm dia, a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of 0.60mX 0.60m - For Roof & Valve Chambers- CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top dome and slab with mosquito/fly proof nets - 4No - RCC Finial ventilator with fly/bird protection with GI mesh - 1 No, RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C hand railing of 1.0 m height – 1 No etc as per Tender document
4858	Item No#30.Dismantling of Existing ELSR\"s
4859	Earth work excavation in all type of soils \"with intial lead and lift etc., complete by Mechanical means
4860	Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete more than 15 cm thickness ( PCC)
4861	Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead ( R.C.C. work)
4862	Cutting steel bars in R.C.C. of R.B. work (sectional area of R.C.C. or R.B. Work to be measured) Details of cost for one Sq.m. of sectional area
4863	Carting of dismantling material up to lead of 5 KM
4864	Item No#31.Implementation of Environmental Management plan
4865	Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations)once in a month duringthe Pre-Construction periodand once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
4866	Noiselevel(5Monitoringstations)onceina season during the Pre-Construction period and once in a season forthree seasons (10Monitoringstations) during the constructionperiodat Intake well,Sump& PH,FiltrationPlant/WTP,ELSRs,Pipelines &Distribution network
4867	Water Quality Monitoring surface / ground(5 Monitoring stations)once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during theconstructionperiod atIntakewell,Sump&PH,Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
4868	Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)
4869	Cutting of Trees and removal
4870	Greenbelt development and maintenance in the surroundings / Buffer zone as per approved drawing
4871	Health checkups and free medical distribution
4872	Awareness program/training
4873	Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism:Sprinkling of watertwice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of watertwice in a day for 1 vehicles x 100 days (excluding rainy days) during Operationalphase.
4874	Hiring for 1 No Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
4875	Project Information Boards - Setting up of Sign boards, Posters, barricades etc.
4876	Item No#32.Supply distrubution and fixing, installation of Flowmeters, Motorised Valves, Level Indicators including Supervisory Control and Data Acuasation System (SCADA) for controlling and monitoring of the bulk water supply pipelines
4877	Instrumantation and Automation of the Pumping System: Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
4878	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4879	Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties
4880	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
4881	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
4882	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer. 200MM Dia Above Specification..
4883	Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
4884	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
4885	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
4886	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
4887	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4888	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
4889	Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.
4890	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 100MM Dia Above Specification.
4891	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 150MM Dia Above Specification
4892	Reservoir Inlet Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. 150MM Dia Above Specification
4893	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.100MM Dia Above Specification.
4894	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.150MM Dia Above Specification.
4895	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.200MM Dia Above Specification.
4896	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 100MM Dia Above Specification.
4897	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 150MM Dia Above Specification.
4898	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer 200MM Dia Above Specification.
4899	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.100MM Dia Above Specification.
4900	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.150MM Dia Above Specification.
4901	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.200MM Dia Above Specification.
4902	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4903	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
4904	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
4905	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4906	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
4907	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4908	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4909	Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4910	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4911	24 x 7 Water Supply ::DMA Management :: supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.200MM Dia Above Specification.
4912	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
4913	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
4914	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4915	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
4916	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
4917	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4918	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4919	Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4920	Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
4921	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
4922	AMI Water Meter Management. Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A.
4923	Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-BUnder DMA-1under 800 KL ELSR at R&B Guest house with above specifications
4924	Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.
4925	Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
4926	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
4927	Item No#33.Construction of Clear Water SCADA Room 8.00 x 12.00 Size.
4928	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
4929	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
4930	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
4931	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
4932	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
4933	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
4934	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings
4935	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workPedastals around Columns
4936	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workColumns Up to plinth
4937	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workPlinth Beams 300 x 400
4938	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workColumns
4939	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workUp to First Floor Roof Level
4940	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workBeams 230 x 500
4941	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workLintels
4942	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workSunshades
4943	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workStaircase slab 0.15 m thick
4944	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workRCC Slab 150mm thick
4945	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
4946	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).For Ground Floor Level
4947	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).For First Floor Level
4948	11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.
4949	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.For First Floor Level
4950	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.For First Floor
4951	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
4952	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
4953	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
4954	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
4955	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
4956	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
4957	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
4958	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
4959	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
4960	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
4961	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
4962	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
4963	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
4964	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
4965	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
4966	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
4967	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
4968	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
4969	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
4970	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
4971	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
4972	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
4973	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
4974	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
4975	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
4976	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
4977	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
4978	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
4979	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k
4980	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
4981	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
4982	SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
4983	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
4984	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
4985	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
4986	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
4987	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
4988	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
4989	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
4990	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
4991	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
4992	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete25 mm dia nominal bore -from tank to jn forof individual lines and inlet
4993	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete20 mm dia nominal bore -fromjn forof individual lines to toilets
4994	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete15 mm dia nominal bore -for internal
4995	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
4996	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
4997	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
4998	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
4999	S& F GI union Ist Quality 12.70mm
5000	S& F GI union Ist Quality 19.05mm
5001	S& F GI union Ist Quality 25.40mm
5002	Carting away the surplus excavated materialsi.e., earthfrom the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
5003	Item No#34.Providing Distribution Network in Zone -I
5004	Providing Distribution Network in Zone -I Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
5005	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches Manual means 30%
5006	Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling
5007	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
5008	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 160mm dia.
5009	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 200mm dia.
5010	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 250mm dia.
5011	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 315mm OD
5012	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 110mm dia.
5013	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 110 mm dia for Air TEEs
5014	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 160mm dia.
5015	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 160 mm dia for Air TEEs
5016	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 200mm dia.
5017	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 200 mm dia for Air TEEs
5018	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 315mm OD
5019	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 355mm OD
5020	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 355 mm dia for Air TEEs
5021	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges110mm dia.
5022	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 110 mm dia for Air TEEs
5023	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges160mm dia.
5024	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 160 mm dia for Air TEEs
5025	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges200mm dia.
5026	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200 mm dia for Air TEEs
5027	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges315mm OD
5028	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges355mm OD
5029	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 355 mm dia for Air TEEs
5030	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps110mm dia.
5031	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 160mm dia.
5032	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 200mm dia.
5033	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 250mm dia.
5034	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 355mm OD
5035	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 110X125 mmdia
5036	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 125x140 mm dia
5037	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 140x160 mm dia
5038	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 160x180 mm dia
5039	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 180x200 mm dia
5040	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 200x225 mm dia
5041	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 225x250 mm dia
5042	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 250x280 mm dia
5043	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 280x315 mm dia
5044	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 315x355 mm dia
5045	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES110mm dia.
5046	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 160mm dia.
5047	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 200mm dia.
5048	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 250mm dia.
5049	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 315mm OD
5050	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 110mm dia.
5051	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 160mm dia.
5052	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 200mm dia.
5053	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 315mm OD
5054	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
5055	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 160mm dia.
5056	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 200mm dia.
5057	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 315mm OD
5058	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours100X2.00m on 110 and 160 mm dia mains for scours
5059	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours100x1.00m long DF pipes for sluice valves
5060	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours150 mm dia x2.00m on 200 and 250 mm dia pipes for scours
5061	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours150x1.00m long DF pipes for sluice valves
5062	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours200 mm dia x2.00m on 315 and 355 mm dia pipes for scours
5063	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours200x1.00m long DF pipes for sluice valves
5064	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours250x1.00m long DF pipes for sluice valves
5065	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours300x1.00m long DF pipes for sluice valves
5066	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours350x1.00m long DF pipes for sluice valves
5067	100 mm dia deck foot bends, 150 mm dia deck foot bends, 100 mm dia semicircular bends, 150 mm dia semicircular bends - fittings
5068	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
5069	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 100 mm distrubution
5070	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150mm dia for distrubution
5071	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 200mm dia for distrubution
5072	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 250mm dia for distrubution
5073	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 300mm dia for distrubution
5074	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 350mm dia for distrubution
5075	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - for scour -100mm diaon 110 mm and 160 mm dia mains
5076	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150 mm dia on 200 and 250 mm dia lines
5077	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 110 mm pipe
5078	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe
5079	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 200 mm pipe
5080	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 250 mm pipe
5081	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 355 mm pipe
5082	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 100 mm distrubution
5083	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150mm dia for distrubution
5084	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 200mm dia for distrubution
5085	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 250mm dia for distrubution
5086	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 300mm dia for distrubution
5087	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 350mm dia for distrubution
5088	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. for scour100mm diaon 110 mm and 160 mm dia mains
5089	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves. 150 mm dia on 200 and 250 mm dia lines
5090	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
5091	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5092	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5093	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5094	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5095	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5096	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
5097	for scours - 100mm diaon 110 mm and 160 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5098	150 mm dia on 200 and 250 mm dia lines- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5099	200 mm dia on 315 and 355 mm lines - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5100	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 110 mm pipe
5101	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 160 mm pipe
5102	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.20x1.00x1.30m size) - 80 mm dia on 200 mm pipe
5103	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.50x1.20x1.40m size) - 80 mm dia on 355 mm pipe
5104	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
5105	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 150 mm dia
5106	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 200 mm dia
5107	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 300 mm dia
5108	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 350 mm dia
5109	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 80 mm dia
5110	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 100 mm dia
5111	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 150 mm dia
5112	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 200 mm dia
5113	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 250 mm dia
5114	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 300 mm dia
5115	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 350 mm dia
5116	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5117	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5118	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5119	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
5120	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
5121	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
5122	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
5123	Supply , Delivery and installation of manually adjustedpreassure reducingvalves , accurate pressure ratings.Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installedat key inlets points of the service reservior. (rate as per quatation)
5124	Item No#35.Providing Distribution Network in Zone -II
5125	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
5126	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches Manual means 30%
5127	Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling
5128	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
5129	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S160mm dia.
5130	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S200mm dia.
5131	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 250mm dia.
5132	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 315mm OD
5133	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck110mm dia.
5134	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 110 mm dia for Air TEEs
5135	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck160mm dia.
5136	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 160 mm dia for Air TEEs
5137	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck200mm dia.
5138	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 200 mm dia for Air TEEs
5139	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck250 mm OD
5140	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 315 mm dia for Air TEEs
5141	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 355 mm dia for
5142	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 355 mm dia for Air TEEs
5143	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 110mm dia.
5144	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 110 mm dia for Air TEEs
5145	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 160mm dia.
5146	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 160 mm dia for Air TEEs
5147	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200mm dia.
5148	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200 mm dia for Air TEEs
5149	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges315 mm OD
5150	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 110mm dia.
5151	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 160mm dia.
5152	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps200mm dia.
5153	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 110X125 mmdia
5154	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 125x140 mm dia
5155	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 140x160 mm dia
5156	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 160x180 mm dia
5157	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 180x200 mm dia
5158	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 200x225 mm dia
5159	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 225x250 mm dia
5160	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 250x280 mm dia
5161	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 280x315 mm dia
5162	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES110mm dia.
5163	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 160mm dia.
5164	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 200mm dia.
5165	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 315mm OD
5166	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 110mm dia.
5167	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 160mm dia.
5168	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 200mm dia.
5169	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 315mm OD
5170	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
5171	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 160mm dia.
5172	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 200mm dia.
5173	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 315mm OD
5174	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100X2.00m on 110 and 160 mm dia mains for scours
5175	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100x1.00m long DF pipes for sluice valves
5176	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours
5177	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150x1.00m long DF pipes for sluice valves
5178	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 200x1.00m long DF pipes for sluice valves
5179	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 250x1.00m long DF pipes for sluice valves
5180	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 300x1.00m long DF pipes for sluice valves
5181	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 350x1.00m long DF pipes for sluice valves
5182	100 mm dia deck foot bends, 150 mm dia deck foot bends, 100 mm dia semicircular bends, 150 mm dia semicircular bends - fittings
5183	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
5184	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 100 mm distrubution
5185	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150mm dia for distrubution
5186	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 200mm dia for distrubution
5187	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 300mm dia for distrubution
5188	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 350mm dia for distrubution
5189	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - for scour -100mm diaon 110 mm and 160 mm dia mains
5190	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150 mm dia on 200 and 250 mm dia lines
5191	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 110 mm pipe
5192	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe
5193	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 200 mm pipe
5194	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 250 mm pipe
5195	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 355 mm pipe
5196	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.100 mm distrubution
5197	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150mm dia for distrubution
5198	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200mm dia for distrubution
5199	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.250mm dia for distrubution
5200	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.350mm dia for distrubution
5201	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.for scour100mm diaon 110 mm and 160 mm dia mains
5202	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150 mm dia on 200 and 250 mm dia lines
5203	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
5204	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5205	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5206	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5207	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5208	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5209	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
5210	for scours - 100mm diaon 110 mm and 160 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5211	150 mm dia on 200 and 250 mm dia lines- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5212	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 110 mm pipe
5213	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 160 mm pipe
5214	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.20x1.00x1.30m size) - 80 mm dia on 200 mm pipe
5215	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.50x1.20x1.40m size) - 80 mm dia on 355 mm pipe
5216	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
5217	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 150 mm dia
5218	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 200 mm dia
5219	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 350 mm dia
5220	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 80 mm dia
5221	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.100 mm dia
5222	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.150 mm dia
5223	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.200 mm dia
5224	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.250 mm dia
5225	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.300 mm dia
5226	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.350 mm dia
5227	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5228	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5229	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5230	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
5231	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
5232	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
5233	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
5234	Supply , Delivery and installation of manually adjustedpreassure reducingvalves , accurate pressure ratings.Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installedat key inlets points of the service reservior. (rate as per quatation)
5235	Item No#36.Providing Distribution Network in Zone -III
5236	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
5237	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches Manual means 30%
5238	Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling
5239	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
5240	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S160mm dia.
5241	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S200mm dia.
5242	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S250mm dia.
5243	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S315mm OD
5244	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 110mm dia.
5245	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck110 mm dia for Air TEEs
5246	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck160mm dia.
5247	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck160 mm dia for Air TEEs
5248	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck200mm dia.
5249	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 200 mm dia for Air TEEs
5250	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck315 mm OD
5251	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 315 mm dia for Air TEEs
5252	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 110mm dia.
5253	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges110 mm dia for Air TEEs
5254	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 160mm dia.
5255	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges160 mm dia for Air TEEs
5256	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200mm dia.
5257	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200 mm dia for Air TEEs
5258	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 315 mm OD
5259	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 315 mm dia for Air TEEs
5260	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 110mm dia.
5261	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 160mm dia.
5262	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 200mm dia.
5263	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete c) End Caps 315 mm dia.
5264	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 110X125 mmdia
5265	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 125x140 mm dia
5266	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 140x160 mm dia
5267	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 160x180 mm dia
5268	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 180x200 mm dia
5269	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 200x225 mm dia
5270	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 225x250 mm dia
5271	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 250x280 mm dia
5272	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 280x315 mm dia
5273	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES110mm dia.
5274	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 160mm dia.
5275	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 200mm dia.
5276	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 315mm OD
5277	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 110mm dia.
5278	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 160mm dia.
5279	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 200mm dia.
5280	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 315mm OD
5281	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
5282	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 160mm dia.
5283	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 200mm dia.
5284	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 250mm dia.
5285	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 315mm OD
5286	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100X2.00m on 110 and 160 mm dia mains for scours
5287	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100x1.00m long DF pipes for sluice valves
5288	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours
5289	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150x1.00m long DF pipes for sluice valves
5290	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 200x1.00m long DF pipes for sluice valves
5291	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 200x1.00m long DF pipes for sluice valves
5292	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 250x1.00m long DF pipes for sluice valves
5293	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 300x1.00m long DF pipes for sluice valves
5294	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 350x1.00m long DF pipes for sluice valves
5295	100 mm dia deck foot bends, 150 mm dia deck foot bends, 100 mm dia semicircular bends, 150 mm dia semicircular bends - fittings
5296	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
5297	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 100 mm distrubution
5298	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150mm dia for distrubution
5299	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 200mm dia for distrubution
5300	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 300mm dia for distrubution
5301	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 350mm dia for distrubution
5302	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - for scour -100mm diaon 110 mm and 160 mm dia mains
5303	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150 mm dia on 200 and 250 mm dia lines
5304	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 200 mm dia on 200 and 250 mm dia lines
5305	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 110 mm pipe
5306	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe
5307	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 200 mm pipe
5308	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 300 mm pipe
5309	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 355 mm pipe
5310	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.100 mm distrubution
5311	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150mm dia for distrubution
5312	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200mm dia for distrubution
5313	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.300mm dia for distrubution
5314	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.350mm dia for distrubution
5315	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.for scour100mm diaon 110 mm and 160 mm dia mains
5316	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150 mm dia on 200 and 250 mm dia lines
5317	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm dia on 200 and 250 mm dia lines
5318	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
5319	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5320	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5321	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5322	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5323	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
5324	for scours - 100mm diaon 110 mm and 160 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5325	150 mm dia on 200 and 250 mm dia lines- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5326	200mm dia on 200 and 250 mm dia lines- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5327	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 110 mm pipe
5328	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 160 mm pipe
5329	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.20x1.00x1.30m size) - 80 mm dia on 200 mm pipe
5330	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.20x1.00x1.30m size) - 80 mm dia on 315 mm pipe
5331	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.50x1.20x1.40m size) - 80 mm dia on 355 mm pipe
5332	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
5333	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 150 mm dia
5334	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 200 mm dia
5335	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 300 mm dia
5336	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.- 350 mm dia
5337	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 80 mm dia
5338	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.100 mm dia
5339	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.150 mm dia
5340	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.200 mm dia
5341	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.250 mm dia
5342	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.300 mm dia
5343	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.350 mm dia
5344	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5345	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5346	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5347	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
5348	BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
5349	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
5350	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
5351	Supply , Delivery and installation of manually adjustedpreassure reducingvalves , accurate pressure ratings.Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installedat key inlets points of the service reservior. (rate as per quatation)
5352	Item No#37.Providing Distribution Network in Zone -IV
5353	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenchesMachenical mans 70%
5354	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0m. For Pipe line trenches Manual means 30%
5355	Filling inpipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHsand filling
5356	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S 110mm dia.
5357	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S160mm dia.
5358	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S200mm dia.
5359	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S250mm dia.
5360	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S315mm OD
5361	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S355mm OD
5362	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 110mm dia.
5363	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck110 mm dia for Air TEEs
5364	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck160mm dia.
5365	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck160 mm dia for Air TEEs
5366	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck200mm dia.
5367	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 200 mm dia for Air TEEs
5368	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck250 mm OD
5369	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 315 mm OD
5370	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 355 mm dia for
5371	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck355 mm dia for Air TEEs
5372	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete a) Pipe ends - long neck 400 mm dia for Air TEEs
5373	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 110mm dia.
5374	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges110 mm dia for Air TEEs
5375	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 160mm dia.
5376	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges160 mm dia for Air TEEs
5377	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200mm dia.
5378	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 200 mm dia for Air TEEs
5379	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 250 mm OD
5380	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges315 mm OD
5381	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 355 mm dia
5382	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges 355 mm dia for Air TEEs
5383	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete b) MS Flanges400 mm dia for Air TEEs
5384	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completec) End Caps 110mm dia.
5385	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completec) End Caps 160mm dia.
5386	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completec) End Caps 200mm dia.
5387	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 110X125 mmdia
5388	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 125x140 mm dia
5389	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 140x160 mm dia
5390	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 160x180 mm dia
5391	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 180x200 mm dia
5392	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 200x225 mm dia
5393	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 225x250 mm dia
5394	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 250x280 mm dia
5395	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 280x315 mm dia
5396	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers 315x355 mm dia
5397	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete d) Reducers355x405 mm dia
5398	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES110mm dia.
5399	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 160mm dia.
5400	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 200mm dia.
5401	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 250mm dia.
5402	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 315mm OD
5403	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 355mm OD
5404	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.completee) TEES 400 mm dia
5405	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 110mm dia.
5406	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 160mm dia.
5407	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 200mm dia.
5408	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 250mm dia.
5409	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 315mm OD
5410	Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete F)Bends 355mm OD
5411	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S -110mm dia.
5412	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 160mm dia.
5413	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 200mm dia.
5414	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 315mm OD
5415	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S - 355mm OD
5416	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100X2.00m on 110 and 160 mm dia mains for scours
5417	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 100x1.00m long DF pipes for sluice valves
5418	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150 mm dia x2.00m on 200 and 250 mm dia pipes for scours
5419	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 150x1.00m long DF pipes for sluice valves
5420	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 200x1.00m long DF pipes for sluice valves
5421	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 300x1.00m long DF pipes for sluice valves
5422	Supply and delivery of DIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities. DIDF pipes for scours 350x1.00m long DF pipes for sluice valves
5423	100 mm dia deck foot bends, 150 mm dia deck foot bends, 100 mm dia semicircular bends, 150 mm dia semicircular bends - fittings
5424	100x100x80 mm DIDF TEE for air valves, 150x150x80 mm DIDF TEE for air valves,200x200x80 mm DIDF TEE for air valves, 250x250x80 mm DIDF TEE for air valves, 300x300x80 mm DIDF TEE for air valves, 350x350x80 mm DIDF TEE for air valves
5425	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 100 mm distrubution
5426	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150mm dia for distrubution
5427	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 200mm dia for distrubution
5428	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 300mm dia for distrubution
5429	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 350mm dia for distrubution
5430	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - for scour -100mm diaon 110 mm and 160 mm dia mains
5431	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16 - 150 mm dia on 200 and 250 mm dia lines
5432	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 110 mm pipe
5433	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80 mm dia on 160 mm pipe
5434	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 200 mm pipe
5435	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 250 mm pipe
5436	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 80mm dia 355 mm pipe
5437	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.100 mm distrubution
5438	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150mm dia for distrubution
5439	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200mm dia for distrubution
5440	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.250mm dia for distrubution
5441	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.300mm dia for distrubution
5442	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.350mm dia for distrubution
5443	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.for scour100mm diaon 110 mm and 160 mm dia mains
5444	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.150 mm dia on 200 and 250 mm dia lines
5445	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.80 mm dia on 150,250,315,355 mm pipes
5446	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 100 mm dia on 400 mm pipe
5447	Construction of sluice and scourValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work - 100 mm distrubution Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5448	150mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size))
5449	200mm dia for distrubutionConstruction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5450	250mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.60x1.60x1.30m size)
5451	300mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
5452	350mm dia for distrubution - Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.70x1.70x1.40m) size)
5453	for scours - 100mm diaon 110 mm and 160 mm dia mains- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5454	150 mm dia on 200 and 250 mm dia lines- Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of (1.00x1.00x1.20m size) size)
5455	Construction of AirValve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 110 mm pipe
5456	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.10x0.90x1.20m size) - 80 mm dia on 160 mm pipe
5457	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification (For minimum of 1.20x1.00x1.30m size) - 80 mm dia on 200 mm pipe
5458	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.50x1.20x1.40m size) - 80 mm dia on 355 mm pipe
5459	Construction ofVRCCvalve chamber as per type design with Earth work, 0.1 Mts sand filling, 0.1 M CC (1:4:8) bed,0.2 mts thick sidewall andcover slab thickness of 0.15 VRCC M20 gradevibration, curing etc.complete including cost ofreinforcement & its fabrication charges and as per Technical Specification For minimum of (1.30x1.50x1.60m) - 100 mm dia on 400 mm pipe
5460	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.-100mm dia
5461	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 150 mm dia
5462	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 200 mm dia
5463	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 350 mm dia
5464	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 400 mm dia
5465	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 80 mm dia
5466	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.100 mm dia
5467	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.150 mm dia
5468	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.200 mm dia
5469	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.250 mm dia
5470	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.350 mm dia
5471	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.400 mm dia
5472	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5473	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5474	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
5475	Collection, Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete for road restoration
5476	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD. (CC pavement)
5477	Supply, delivery of Electromagnetic flow meter manufacture should have ISO 9001:2008 certification anf flow meter testing confirming to ISO 17025; Flow meter tube SS 304; Flnages Carbon steel as per DIN PN 10 or higher rating as per requirement ;Liner;Hard rubber or PTFE suitsble for drinking water application; Grounding:Grounding ringsSS 304/Grounding electrodes of material SS 316; Coil housing and junction box SS 304 Die cast Aluminium / Carbon steel with anticorrossive apoxy coating of minimim thickness 150 Micron /Equivalent as per EN-ISO-12944 standard as per site condition ingress protection ; IP 68 for Sensorand IP 67 for Transmitter; Flow Transmitter accuracy +/- 0.50% of measured values of velocities 0.50m/sec and above ,Display:Digital LCD/LED (backlit LCD/LED) Display instantaneous flow ,Bi-directional flow,totalised flow, Cable beween flow head and Transmitter maximum 25 m including PVC conduit,Surge arrester to be provided.Power supply and out put 230 V AC or 24V DC as appilicable to site condition and -4-20m A HART;Compatible to SCADA/WEB based data acqusition system;Flow meter test lab certification should be provided from NABL approved lab/FCRIExcluding taxes and duties with 5 years warrenty (make M/S krohne Marshall / Endress+Hauser / Yokagawa / siemens / Emerson / ABB / or equivalent make
5478	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation)
5479	Supply , Delivery and installation of manually adjustedpreassure reducingvalves , accurate pressure ratings.Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installedat key inlets points of the service reservior. (rate as per quatation)
5480	Item No#38.Providing 15mm diaNew House service connections and trasferring existing House Service connections
5481	Providing house service connections at house holds side in earthern roadsProviding House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½”(20mmOD )MDPE pipe and other side with female threaded off-takewith SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½”(20mmOD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe ofspecified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) 40 mm UPVC pipe for drain crossingand as per Technical Specification Providing house service connections at House holds side in earthern roads
5482	Providing House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½”(20mmOD )MDPE pipe and other side with female threaded off-takewith SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½”(20mmOD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe ofspecified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) 40 mm UPVC pipe for drain crossingand as per Technical Specification Providing house service connections at other side in earthern roads
5483	Providing House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½”(20mmOD )MDPE pipe and other side with female threaded off-takewith SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½”(20mmOD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe ofspecified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) 40 mm UPVC pipe for drain crossingand as per Technical Specification Providing house service connections at HHside in BT &CCroads
5484	Providing House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½”(20mmOD )MDPE pipe and other side with female threaded off-takewith SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½”(20mmOD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin)and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe ofspecified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) 40 mm UPVC pipe for drain crossingand as per Technical Specification Providing house service connections at otherside in BT &CCroads
5485	Item No#43.Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge
5486	Providing Technical Graduate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge
5487	Item No#44.Hiring for 1 No Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
5488	Hiring for 1 No Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
5489	Item No#45.Manning, Operation and Maintenance of y Water Supply Improvements Scheme for 7 years
5490	Personal required for operating Intake/Offtake well/Pump houses Operator
5491	Personal required for operating Intake/Offtake well/Pump housesFitter/Helper
5492	Personal required for operating Intake/Offtake well/Pump houses Watch man
5493	Personal required at operating Raw water rising mains Fitter/Helper
5494	Personal required at operating Water treatment plants & Sump Operator
5495	Personal required at operating Water treatment plants & Sump Fitter/Helper
5496	Personal required at operating Water treatment plants & Sump Elecrician / Mechanic
5497	Personal required at operating Water treatment plants & Sump Watch man
5498	Personal required at operating Water treatment plants & Sump Lab Tecnician
5499	Personal required at operating Service reservoirs Fitter
5500	Personal required at operating Service reservoirs Watch man
5501	Personal required at operating distribution system Fitter/Helper
5502	A) Chlorine gas for Disinfection @ 3 mg/Lt Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines 1st year
5503	B) Alumino -Ferric (Alum) @ 20 mg/Lt Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement a1st year
5504	Repairs to pumpsets & Water pipe lines (2 years after execution period) i) Replacement of bearings of pumpsets
5505	ii) Replacement of sleeves
5506	iv)Replacement of glands of sluice valves
5507	v) Replacements of balls of Air valves
5508	vi) Greease
5509	vii) Gland Packing
5510	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 250 mm HDPE Pipes
5511	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 200 mm HDPE Pipes
5512	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 160 mm HDPE Pipes
5513	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 110 mm HDPE Pipes
5514	LOCAL SCADA at ULB LEVEL Jr. Service Engineer (Diploma Engineer) Rate as per Labour Rates LAB-00127 of CSSR 2025-26
5515	Data Operator Rate as per Labour Rates LAB-00134 ofCSSR 2025-26
5516	Office assistant, Rate as per Labour Rates LAB-00124 ofCSSR 2025-26
5517	II) MAINTAINANCE OF LOCAL CONTROL STATION : SCADA Replacement of necessary servicable materials(Reagents) for Chlorine Analysers *Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuet Clear Water outlet of Water Treatment plant Inlet of 1000 KL ProposedELSR atMukkapati Nagar zone-I Inlet of800 KLProposed ELSR atBack side of Nagara panchayat office zone-II Inlet of 1000 KL existing at BC Colonyzone-III Inlet of 1000 KL existing at Anasagaram zone-IV
5518	Replacement of necessary tranducers for PH analysers Clear Water outlet of Water Treatment plant(Re-imbersable on submission of Proof of Payment)
5519	Replacement of necessary tranducers for Turbidity analysers Clear Water outlet of Water Treatment plant
5520	BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment) GPRS Connections WTP Quality Management ELSR Management DMA Management
5521	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)
5522	CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA Man PowerApplication Engineer,(Graduate Engineer) To monitor all issues related to both operation & service
5523	System Engineer,(Graduate Engineer) To monitor all meters location through SCADA station and give feedback to the service engineers.
5524	Sr. Service Engineer (Graduate Engineer ) To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns
5525	Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.
5526	Office assistant,To assist the entire team, dispatches and also maintain SCADA station clean and neat
5527	II) MAINTAINANCE OF LOCAL CONTROL STATION :16 out of 84 Months BSNL Charges for static IPInterconnection for Data receive station from all Local Contol RTU panels.
5528	Data base management for WEB reportingData storage and reporting system for view through WEB and Mobile networks
5529	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)
5530	VUYYURU NAGARA PANCHAYAT
5531	Construction of Off take Chamber and Raw watater collection well atyakamuru village
5532	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By mechanical means 20%
5533	Manual Means
5534	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
5535	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5536	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM30 design mix concrete a).For Base Slabs:
5537	b) For Side Walls:
5538	c)For Raw water sump
5539	e)For Roof Slab & Cover slab
5540	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
5541	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying.( APSS No.126)
5542	Providing VCCM20 using graded IS383HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete- for flooring
5543	Supply and delivary and fixing of MS Grills of any design including cost and conveyance of all material and all labour charges such as cutting welding ,gringing etc complete as per ss
5544	Bailing out of water from drain trench during exucution with oil engines including cost of fuel,driver etc complete.
5545	Providing SS 304GR Shutter gate and locking arrangement
5546	Laying of 400mm dia. D.I. K7 Raw Water Gravity main from Offtake chamber to Raw water Sump at Village yakamuru
5547	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. Manual meansManual means 20%
5548	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depthOrdinery soils-Mechanical Means Upto 3 m depth 70%
5549	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
5550	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-7 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
5551	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
5552	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
5553	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site as per S.S. and as directed by the departmental authorities.
5554	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
5555	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 400 mm dia
5556	Supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation.- 1 A) Without By-Pass SOR Rate -2018-19-400mm Ø DI D/F valve - PN16 for main
5557	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.400 mm dia
5558	Construction of RCC M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
5559	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20ANCHOR BLOCKS
5560	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For Thrust Blocks
5561	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. complete 400mm dia
5562	Bailing out of water from drain trench during exucution with oil engines including cost of fuel,driver etc complete. 5 days x5 HP X5 hours
5563	Construction of 5.00 m dia.(70.74 KL) Raw Water sump cum pump house at proposedOff take Chamber at yamakuru village
5564	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundationsupto 3.00m depthodinary soils upto 3.00m depth with mechanery
5565	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss Raw Water sump cum pump house foundations
5566	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete Raw Water sump cum pump house foundations
5567	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Raft slab
5568	vertical wall 3.00m intial height below GL
5569	vertical wall 3.00m intial height Above GL
5570	floor slab 0.25 m thick
5571	beams for placing motors
5572	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) for Pump house Columns
5573	b) for roof beams-
5574	c) for roof slab0.15 m thick with 0.30 m extension
5575	d) for Lintel Beams alround
5576	g) for Sunshade of 0.60m wide and thickness of .075m at fixed end and 0.05mts.at free end
5577	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5578	Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.S (for Super structure of Pump house)
5579	for Pump house Parapet wall
5580	Supply and fixing of 50mm thick pre-cast Cement Jollys of approved design including cost and conveyance to workspot and all labour charges for fixing in position etc.complete as per S.S for Pump house
5581	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S for ceiling
5582	Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house (Ground floor)
5583	First floor
5584	Plastering with CM (1:3) 20mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S over floor slab for fixing pumps and motors
5585	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
5586	Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201)
5587	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
5588	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30
5589	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities 5 HP X 6 Hrs x3Nosx20 days
5590	Supply and erection of MS Gantry girder as per the approved designs and drawings 3 T capacity
5591	Supply and fixing of Stainless steel ladder made out of suitable sections for access from floor slab to Base slab
5592	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
5593	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
5594	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
5595	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
5596	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
5597	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
5598	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
5599	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
5600	Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
5601	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
5602	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
5603	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
5604	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs..Unit each
5605	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete.BLD-ELEC-9.7.35
5606	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete BLD-ELEC-9.7.36
5607	Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. BLD-ELEC-7-9-3
5608	Providing 350mm dia. D.I. K9 Raw Water pumpingmain fromCollection Well at Off take chamber to Aeratorat 8.10 MLD WTP
5609	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches. Manual 20%
5610	Mechanical Means 80%
5611	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth depth 70%
5612	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for pipe line trenchRBR-FNDN-2(1)-sand filling
5613	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
5614	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including all Taxes and other duties except GST etc.,complete as per S.S. and as directed by the departmental authorities.
5615	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 250 mm Ø DI D/F Pipe of 2.00 m
5616	250 mm Ø DI D/F Pipe of 1.00 m
5617	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.350 mm dia
5618	250 mm dia
5619	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 350 mm dia
5620	250 mm dia
5621	100 mm dia
5622	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94
5623	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
5624	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, conveyance to work spot and stacking care fully at site etc.complete as per S.S 350mm dia PN16
5625	250mm dia PN16 for scour
5626	100 mm dia PN16 on 350mm line gate valve for isolating Air valve
5627	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.PN16 350mm dia PN16
5628	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16 100 mm dia
5629	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 350 mm dia sluicevalves
5630	250 mm dia sluicevalves for scour
5631	100 mm dia PN16 on 350mm line gate valve for isolating Air valve
5632	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 100 mm dia
5633	Construction of Masonary Sluice Valvechambers with VRCC M30 Concrete suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work350 mm dia sluicevalves
5634	250 mm dia sluicevalves for scour
5635	Construction of Masonary Air Valve chambers with VRCC M30 Concretesuitable to the air valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work100 mm dia
5636	Construction of RCC M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
5637	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks RCC M20
5638	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work
5639	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete
5640	Supply and delivery ,lowering of M.S.pipes and fittings of 10mm thick for non-standard size specials with 6mm thick SRC Cement Mortar lining inside and Apoxy coating out side excluding taxes, transportation and conveyance to work spot and stacking etc., complete as per S.S andas directed by the departmental authorities for finshed item of work. 350 mm dia MS pipe 12 mm thick
5641	Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks RCC M20 for encasing
5642	Construction of Staff Quarter at YAKAMARRU RAW WATER SUMP
5643	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth Manual Means 20%
5644	Mechanical Means 80%
5645	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundations of cc drains and pipe line trench-sand filling
5646	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5647	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix1.column footings
5648	Columns
5649	Plinth beam
5650	Lintle beams
5651	Roof Beams
5652	Roof slab
5653	Sunshades
5654	Loft slab
5655	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssGround floor
5656	1st floor
5657	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside Ground floor
5658	1st floor
5659	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
5660	Colourwashing two coats Using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
5661	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
5662	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work 1. Door -D - 1.20X2.10 m
5663	doorsD1 -1.0X2.10m
5664	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
5665	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work
5666	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work
5667	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5668	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
5669	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
5670	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
5671	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
5672	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
5673	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
5674	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
5675	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
5676	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
5677	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
5678	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
5679	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/Crystal/Havells/HPL
5680	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
5681	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
5682	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
5683	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
5684	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
5685	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
5686	Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm size
5687	Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components
5688	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
5689	Supply of 110 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
5690	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
5691	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
5692	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
5693	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
5694	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 1.25 mm dia nominal bore -from tank to jn forof individual lines
5695	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
5696	15 mm dia nominal bore -for internal
5697	S&F of GI &GM fittings GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
5698	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
5699	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
5700	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
5701	S& F GI union Ist Quality12.70mm
5702	19.05mm
5703	25.40mm
5704	For septic Tank Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
5705	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
5706	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5707	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
5708	Cement plasteringusing opc in cm(1:4) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
5709	RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A
5710	Errection of 100 KVA transformer at atProposedRaw water suction well with Transformer yard 15.00x12.00m
5711	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
5712	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
5713	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
5714	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
5715	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
5716	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
5717	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
5718	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
5719	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
5720	A) Earth Electrodes
5721	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
5722	C) Epoxy insulators
5723	D) No.\"8\" SWG Copper wire. MAT 04141
5724	Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.Makes : As per list of recommended brands as category I. MAT-04042 a100KVA
5725	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
5726	LT panel
5727	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
5728	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
5729	Incoming
5730	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5731	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
5732	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
5733	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
5734	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
5735	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
5736	g).3RYB Phase indication lamps with leds
5737	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
5738	Out-Going
5739	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5740	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5741	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5742	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5743	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5744	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
5745	.KWH digital meter fro lighting section
5746	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
5747	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
5748	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
5749	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
5750	Supply and Laying of 3C X 35Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456
5751	Transformer yard
5752	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
5753	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
5754	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5755	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM30 design mix concrete
5756	column footings
5757	Columns1.20-0.10-0.10-0.30+1.80
5758	Plinth beam2(15+12)=54-gate3.00=51.00
5759	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
5760	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5761	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
5762	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
5763	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
5764	supply and filling the transformer yard with 40mm HBG metal m/c
5765	Construction of8.00 MLD Rapid Gravity Filtration plant
5766	Construction of 8 MLD Rapid Gravity Filtration Plant including all civil,mechanical and electrical works using sand as filter media, compatible with SCADA arrangements, duly following relavant IS codes in the design of plant components including trial running for 90 days etc., complete
5767	CivilWorks(All works of VRCC Shall be in M30 design mix)
5768	1). Stilling Chamber and Areation cascade
5769	2). Raw water channel with Stainless Steel Weir of SS304L Grade material and also with digital flow meters
5770	3) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS Blades with gear wheel arrangements etc, Using 304L Grade Steel
5771	4) Clariflucculator / Flocculation tanks with the components of central driven circular clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L tubes /angulars for durability & chemical resistant with wheel arrangements etc,.
5772	5) Filter house, Chemical house, Alum store, Laboratory room , Chlorination plant room, toilet etc. (All structures shall be provided RCC roof only).Chemical house & Chlorinator rooms are to be isolated.
5773	6) Wash water tank of suitable capacity shall be constructed at minimum clearance of 2.00m, above the roof slab of Filter beds / any other structure
5774	7) All the Doors and Windows shall be of Best Teak wood/Aluminium /UPVC make, except entrance door. The entrance door including shutter in filter house shall be with best teak wood of size of 2.40 X 2.40 mts.a) Main Doors of the individual Buidings shall be made of Best Teak woodb) Other Internal Doors of the buildings shall be of Compreesed wood/Aluminium/ UPVC materials.c) Ventilators shall be provided for each building/structure of suitable size as per NBC statndards.
5775	8) All pipes and valves in Plant shall be of D.I. materials. All the Connecting pipes of the plant coponents such as from Flash mixer to Clarifloculator/ Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I. material. The size of sludge disposal pipe shall be minimum of 450 mm dia with D.I D/F pipe.
5776	9) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be suffuiciently spaced for easy operation & maintenance and inspection
5777	10)The bottom level of the wash water control chamber must be above G.Lso as to dispose the wash water and sludge from Clariflocculator by gravity to disposal point.
5778	Additional specificaions
5779	11) Railing for all the components (Clarifloculator, Filter House, Staircas eetc,.) shall be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia pipe for top horizotals,25mm dia for middle row and 40mm dia verticals spaced at interval of not more than 1.00m c/c.
5780	12) Inspection / Path ways in filter beds : Middle pathway: Minimum of 1.50m,Side pathway: Minimum of 1.20m
5781	13) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room, Laboratory) shall be provided with Non-skid tiles of approved make
5782	14 ) The basement ofFiltriatiion plant building shall be minimum of 1.20m above the existing nearby Road top level.
5783	15) Minimum head room of 2.00m shall be provided , at the alum mixing chambers in alum store for inspection & maintenance
5784	16) The minimum width of entrance hall for the Filter House shall be 4.50m and Laboratory, of min size .of 3.30 X 4.50m
5785	17) High efficient Air Blowers shall be installed to the design requirement with low noise pollution , environmental pollution as per PCB guide lines &Testing of blowers as per I.S norms at site.
5786	18) UPVC pipes shall be provided for water drain.Filter pipe manifolds shall be assembled with HDPE pipes
5787	19) Alum storage capacity shall be designed for minimum period of 90 days. Consumables shall be provided for 2115 Running Hours of WTP.
5788	20) Chlorinator : Vaccum type chlorinator shall be provided with following specifications:a) Vaccum operated solution feeding type Vaccum Regulator, Rotometer,Rate setting Valve, built-in NRV, Gas Overflow out let by manifolding to mount the system with the unit.
5789	b) The unit shall consists of Ejector with necessary accessories such as Check Valve, Drain Valve and Vacum relief Valves - for control of chlorinator dosage.c) The Accessories and manifolds shall be chlorine resistant and made of corbon steel seam less pipes, copper tube with brass fittings of suitable size & dimensions, with diaphram sealed chlorine pressure gauge arrangements
5790	d) Water Boosted Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with Head ranging from 16 to 35 MWCe) The water & solution carrying pipes shall be made of UPVC material of suitable size incl.all specials such as Tee\"s , Bends, couplings &NRVs and also Pressure Gauges of suitable range.
5791	f) Chlorine Gas detector with alarm indicator.The installation includes all necessary accssories, civil and mechanical works,manifold header installations, injector fixing, connection with UPVC pipes, solution pipings, fixing of motors as per standardspeicfications and commissioning of Cholirnation Plant to the required demand, with a deffect liability period of 1 year.The cholrinator of may be of any reupted make or any make of Metito/Toshocow-Jesco/ Industrial devices.g)Life breathing operators.h)Chlorine escape BA Set.
5792	i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator for Post Chlorination
5793	ii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator for Post Chlorination
5794	iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator for Post Chlorination
5795	1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical resistance. (Alam tanks must be bound with corrosion resistant material (HDPE Lining, Bitumen Coating, tiles etc)
5796	2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical resistance
5797	3) Filtration plant euqipment instrumentation and piping
5798	4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge arrangeemnt etc.,
5799	5) Pneumatic tyre wheel shall be provided for the bridge clariflocculator
5800	6) Wash water tank fittings and pumpsets with 100% stand by.
5801	7)Air blower with motor 100% stand by and pipe connections made with of SS Pipes Confirming to SS304 Grade, in filter bed region.
5802	8)Spares & Tools for 2 years
5803	9) Gaseous Chlorination with cylinders has to provided with protection measures.
5804	1)Necessary power supply wiring to motors and switches bus bar connections as per I.E. Rules
5805	2)Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc.
5806	3) Erecting mechanical & Electrical equipment, trial run for 90 days 23.50 hours per day testing the treated water for efficient standards and maintenance of records and imparting training to staff.
5807	4)Supply of 6 - sets of completion plans and maintenance manual and brochures
5808	5) All cables shall be with of copper material, Cable ducts shall be covered with MS / Aluminum chequed plate.
5809	6) Min LUX levels inside the treatment plant shall be maintained
5810	7) Yard lighting shall be provided as per norms
5811	1) Equipment for Flow of Conductivity, Turbidity, Ph value, Residual Chlorine with recording & data storage facility (Computer based) & Alarmby SMS or other methods.
5812	2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water & Clear water flows by installing Digital Flow meters to measure the flows at Raw water Channel and at each filter bed individually and combined for measuring the quantities of water treated with a facility to record and store the readings & also to send messages to the assigned designatories about the variations/ defficiencies in the flow including alerts for back wash requirements of filter beds, and recovery of data for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make. The equipment shall have the following specifications.
5813	Hardware:
5814	i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter bed out lets with accessories consists of
5815	ii)Electrode Type: General type, Scraper type or replaceable type Electorde made with material of SS external Ultra Touch Sensors as per requirement
5816	iii)Customised Application Requirement : Sensors with Interface logic control board with serial interfaces, including accessories such as Add-on port, external DC Power Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication Button and memory of Data Storage for 30Days , status of Filter Bed Level indicator,Rating, Reading on LCB Display, Menu Driven Data for sending to OnsiteBig Display, operated with Battery Power of any reputed make or any equalent make.
5817	iv)Customised Application Requirement: Power Sensors Interface logic control board with support 8 Power Sensing tags, Central System Interfacing Communication, On - board analog to Digit Convert Integrate Circuit of any reputed make or any equalent make.
5818	v)Customised Application Requirement: Centralized System with two serial interfaces, 3 Nos of Add-On ports, One external DC Power Socket,On - Board Buffer, On - Board Timer, On - Board RS485 Communication,On - Board RS 232 Communication, On - Board GPRS/GSM Module, On -Board Voice Chip, On - Board Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display on LCD Display, Menu Driven, Menu Navigate Keypad, sendind data to the Web Server,Communication with GPRS , operated with Battery Power of any reputed make or any equalent make
5819	Software:
5820	The software shall be designed with Web Domain with Data Base Server and Web Name as per the directions of the Departmental Authorities
5821	The application of Software for Web design & Desktop shall meet the following requirements:
5822	Onsite Display: Letters with size of 1.5’ seven Sigment LED Display with Interfacefor each Filter Bed, for Onsite Display, by displaying the Bed Leves, Ratings, Readings in 3 Columns , for each bed of the plant in succesive rows and cumulative results at the bottom of the screen
5823	Off Site Display: Letters with size of 1.5’ seven Sigment LED Display with Interface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total Cumulative Reading as specified on On-site Display Features
5824	The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level Triggering, before & after Bed wash.
5825	The software shall also have the features of sending messages to the mobiles of the Departmental designatories indicating Bed Low Levels,Power Supply timings, Bed Wash timings and its status, Power Supply timings and its status Grid View Table, Motor Working time and its status Grid View Table, all trigger events and schedule information and including all Snap View Reports, all Daily, Monthly, Yearly Reports, all Power Working Reports, all Power Events Information etc,.
5826	8.00 MLD Rapid Gravity Filtration Plant
5827	Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation,taxes,duties etc 1. 450 mm dia4.00 length
5828	450 mm dia1.00 length
5829	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. as per S.S. and as directed by the departmental authorities.
5830	Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 450 mm dia
5831	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves 450 mm dia
5832	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2 450 mm dia
5833	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 450 mm dia
5834	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthfor pipe line trench 450mm dia pipeline trench
5835	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundations of cc drains and pipe line trench-sand filling 450mm dia pipeline trench
5836	Construction of RCC Sluice Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work450 mm dia sluice valves
5837	Construction 10.00 m dia clear water sump & Pump house at Proposed WTP
5838	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthMachinery 80%
5839	Manual 20%
5840	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
5841	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
5842	Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5843	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Raft
5844	For side walls circular 0.30m thick
5845	Columns
5846	Roof beams
5847	Roof slab
5848	Roof dome slab
5849	Column footings
5850	Pedestals
5851	Columns
5852	Plinth beam
5853	Lintel beams
5854	Roof Beams
5855	Roof slab
5856	Sunshades
5857	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
5858	1st floor Parapet wall
5859	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
5860	1st floor Parapet wall
5861	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
5862	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
5863	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
5864	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
5865	Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities Man hole cover &Ladder
5866	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
5867	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
5868	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5869	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
5870	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
5871	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
5872	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss RCC jollys 50mm thick
5873	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps Rain water pipes
5874	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
5875	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
5876	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
5877	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
5878	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
5879	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
5880	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
5881	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/Crystal/Havells/HPL
5882	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
5883	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
5884	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
5885	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
5886	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
5887	Supply ,Erection and Commissioning of Crane Gantry Girder of Capacity of 3.00 T including cost and conveyance of all material and all labour charges etc complete as per ISI and as directed by the dept . Including all taxes & Labour cess Crane Gantry Girder
5888	Name of the work :-Errection of 315 KVA transformer at ProposedWTP with Transformer yard 15.00x12.00m
5889	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
5890	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
5891	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
5892	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
5893	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
5894	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
5895	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
5896	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
5897	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
5898	A) Earth Electrodes
5899	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
5900	C) Epoxy insulators
5901	D) No.\"8\" SWG Copper wire. MAT 04141
5902	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04045D315 KVA
5903	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
5904	LT panel
5905	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
5906	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
5907	Incoming
5908	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5909	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
5910	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
5911	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
5912	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
5913	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
5914	g).3RYB Phase indication lamps with leds
5915	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
5916	Out-Going
5917	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5918	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5919	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5920	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5921	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
5922	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
5923	.KWH digital meter fro lighting section
5924	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
5925	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
5926	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
5927	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
5928	Supply and Laying of 3C X 70Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458
5929	Transformer yard at proposed SS tank
5930	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
5931	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
5932	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5933	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM20 design mix concrete
5934	column footings
5935	Columns1.20-0.10-0.10-0.30+1.80
5936	Plinth beam2(15+12)=54-gate3.00=51.00
5937	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
5938	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5939	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
5940	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
5941	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
5942	supply and filling the transformer yard with 40mm HBG metal m/c
5943	Construction of Staff Quarter at WTP
5944	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthManual Means 80%
5945	Mechanical Means 20%
5946	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundations of cc drains and pipe line trench-sand filling
5947	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
5948	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix
5949	Columns
5950	Plinth beam
5951	Lintle beams
5952	Roof Beams
5953	Roof slab
5954	Sunshades
5955	Loft slab
5956	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ssGround floor
5957	1st floor
5958	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside Ground floor
5959	1st floor
5960	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height For ceiling slab area
5961	Colourwashing two coats Using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
5962	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss50 mm thick
5963	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of workDoor -D - 1.20X2.10 m
5964	doorsD1 -1.0X2.10m
5965	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20m
5966	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2
5967	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of workToilet door D2
5968	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
5969	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
5970	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete windows
5971	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
5972	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
5973	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
5974	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
5975	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
5976	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
5977	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
5978	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
5979	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
5980	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/Crystal/Havells/HPL
5981	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
5982	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
5983	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
5984	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega Hall , Bed Room , Kitchen
5985	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
5986	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks 2000 lts capacity
5987	Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm size Fortoilets
5988	Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components Fortoilets
5989	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cockFortoilets
5990	Supply of 110 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
5991	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
5992	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
5993	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice 110 mm dia
5994	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
5995	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn forof individual lines
5996	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
5997	15 mm dia nominal bore -for internal
5998	S&F of GI &GM fittings
5999	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
6000	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
6001	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
6002	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent S& F GI union Ist Quality
6003	12.70mm
6004	19.05mm
6005	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
6006	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
6007	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6008	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6009	Cement plasteringusing opc in cm(1:4) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6010	RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A
6011	Construction wash water recirculation of 7.00m dia sump(92.43 KL) atWTP
6012	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth 0-3.00m Machanical means
6013	forwash water recirculation sump foundations 3.00-6.00m Machanical means
6014	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
6015	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
6016	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixerRaft
6017	For side walls circular 0.30m thick below GL
6018	For side walls circular 0.30m thick above GL
6019	Columns 0.30 x 0.30m 3.60-0.30
6020	Roof beams
6021	Roof slab0.15m thick 0.786x(6.60^2-3.00^2)
6022	Roof dome slab 0.15m thick + extra for dome
6023	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
6024	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
6025	Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
6026	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
6027	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
6028	Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator
6029	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches.( 100mm dia. DI k9 Pumpingmain)
6030	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1).(100mm dia. DI k9 Pumpingmain)
6031	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking, excluding GST,etc.complete.(100mm dia. DI k9 Pumpingmain)
6032	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST.(for sluice valves,non return valves and flow meters) 100 mm dia 1.00m long DI DF pipes for sluice and non return valves 1+1
6033	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.( 450mm dia & 100 mm dia DI/DF -TEE ,BENDS,ETC)
6034	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 100mm dia. DI k9 Pumpingmain
6035	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. 100 mm dia DI K9
6036	Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16 100 mm dia sluice valves
6037	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16 100mm dia DI
6038	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 100 mm dia sluice valveand non return valve
6039	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 450mm diaTEES Etc
6040	100 mm dia TEES Etc
6041	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 450mm diaTEES Etc
6042	100 mm dia TEES Etc
6043	Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.For Thrust Blocks at bends and TEEs
6044	Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work. For 100mm dia. Sluice Valves
6045	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5.For Thrust Blocks
6046	Supply and erection of 2# of 1.87KW(2.50HP) CF Pumpsets each with a duty of 12 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash water to Area torm for recirculation
6047	Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.
6048	Supply and erection of 2# of 1.87KW(2.00HP) CF Pumpsets each with a duty of 12 LPS and a total hed of 11m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation
6049	Construction of 600 mm sizeCC disposal drain from proposed WTP
6050	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.Mechanical Means
6051	Manual Means
6052	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1)
6053	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6054	PCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for CC drains RBR-SBST-5 A
6055	Providing Site filling to the proposed sitefor Transformer,Staff Quartersand proposed site of WTP
6056	Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost,and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.
6057	Construction of Compound wall and fencingto head water works
6058	Constuction of compound wall with the following specifications 1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
6059	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
6060	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
6061	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
6062	Construction of 600mm dia. Infiltration Galleries in the bed of Krishna River at Thotla valluru
6063	Excavation of trenches for infiltration galleries and connecting mains in all soils under water including all leads, lifts, shoring, strutting, bailing out water and removal of shoring and strutting materials after completion of pipe line work. for Infiltration Gallery of 300Mt. long a) 0 to 1.00m deep
6064	b) 1.00 to 2.00m deep
6065	c) 2.00 to 5.00mdeep
6066	d) 5.00 to 6.00 m deep
6067	e) 6.00 to 7.00 m deep
6068	f) 7.00 to 8.00 m deep
6069	Manufacture, supply and delivery of 600mm dia. RCC NP3 class perforated pipes for Infiltration gallery including cost and conveyance to work spot and handling charges providing perforated holes including all taxes and duties etc., complete as per S.S 600mm dia.
6070	Manufacture, supply and delivery of R.C.C. Collars confirming to B.I.S. No. 458/2003 suitable for RCC plain end pipes including transportation to work spot including all taxes and duties etc.complete (600mm)
6071	Lowering, laying and jointing of 600mm dia. RCC perforated pipes of NP3 class inclusive of bailing out water and jointing with cement fillets, and all other incidental charges for infiltration gallery inclusive of bailing out water by pumping to keep the trench reasonably dry to fecilate the work excluding cost of perforated pipes and collars.for Infiltration Gallery of 300Mt. Long 600mm dia.
6072	Providing and construction of transition cum filter media using approved or recommended material i.e., 230mm thick 230mm thick 40-20mm C.A, 230mm thick 20-12mm C.A, 230mm thick 12-6mm C.A, 230mm thick Coarse sand and 400mm thick fine sand satisfying the filter criteria including machinery, labour, laying each layer to required slope, compaction etc., complete with all extra leads and de lifts a) 40mm to 20mm size Coarse aggregate
6073	b) 20mm to 12mm size Coarse aggregate
6074	c) 12mm to 6mm size Coarse aggregate
6075	d) Coarse sand
6076	Refilling with excavated sand including cost and conveyance of all materials and labour charges etc., complete.
6077	Construction of 4.0Mt. Infiltration wells (3Nos.) in the alignment of Infiltration Galleries in Krishna River bed at Thotla valluru
6078	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH .up to initial lift of 3.00mts
6079	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 4.00mts.from River bed level for two wells a) Up to 2.00mts depth
6080	b) 2.00mts to 4.00mts depth
6081	c) 4.00mts to 6.00mts depth
6082	d) 6.00mts to 8.00mts depth
6083	e) 8.00mts to 10.00mts depth
6084	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) for Well Curb
6085	b) for Side walls (Well Steining)
6086	c) for Well top slab.
6087	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S for inside of well, Inlet chamber, Screen & Grit Chambers
6088	Providing invert filter media with following sizes of metal including cost of material, laying charges etc., complete as per S.S 40 mm Metal
6089	20 mm metal
6090	12 mm metal
6091	10 mm metal
6092	6 mm metal
6093	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities
6094	Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x10mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities.
6095	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
6096	Supply and fixing of 0.60M x 0.60M D.I. Manhole frame with cover of standard type with suitablelockining arrangements including cost and conveyance to work spot and all labour charges for fixing etc.complete as per S.S
6097	Supply and fixing ofStainless steel Ladder made out of suitable sections for access from Inspection well top slab to bottom
6098	Supply and fixing of ISMB 150 including cost and conveyance to work spot including two coats of anti corrossive black painting including all labour charges for cutting and placing in position etc.complete as per S.S
6099	Construction of 8.0M dia. Clear water collection well cum pump house including construction of 80Mt. long 5.0Mt. wide Service Bridge
6100	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
6101	Formation of bund/approach ramp with Gravel/Quarry spall from approved quarry including cost and conveyance of all materials and labour charges for formation of protection bund by filling, sectioning, levelling, compacting etc.complete as per S.S for approach ramp
6102	Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts a) Up to 2.00mts depth
6103	b) 2.00mts to 4.00mts depth
6104	c) 4.00mts to 6.00mts depth
6105	d) 6.00mts to 8.00mts depth
6106	e) 8.00mts to 10.00mts depth
6107	f) 10.00mts to 11.00mts depth
6108	g) 11.00mts to 12.00mts depth
6109	h) 12.00mts to 13.00mts depth
6110	i) 13.00mts to 14.00mts depth
6111	j) 14.00mts to 15.00mts depth
6112	k) 15.00mts to 16.00mts depth
6113	Providing concrete for plain/reinforced concrete in open foundations using 40 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.unit 1.00 cum Nominal mix 1:3:6- For Flooring- RBR-FNDN-4 for Well bottom plugging , for Pile caps bed
6114	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) for Base slab
6115	b) for Well Curb
6116	c) for Side walls (Well Steining)
6117	b) Side Wall around the Well of 0.60M thick
6118	d) for Columns from Base to Floor
6119	e) for Braces.
6120	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) for Pump house Columns
6121	b) for floor beams- Ring Beam
6122	c) for Floor Slab
6123	d) for Lintel Beams alround
6124	e) for Roof Beams
6125	f) for Roof slab
6126	g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end
6127	Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.S for Super structure of Pump house , for Walk way railing wall
6128	for Pump house Parapet wall,for supporting pillars
6129	Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S (BMS-W-16) for Pump house
6130	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing etc., complete as per S.S for inside of well, Inlet chamber, Screen & Grit Chambers
6131	Plastering with CM (1:4) 20mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house
6132	Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903)
6133	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities Qty. as per item no. 10
6134	Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201) for Rolling Shutter,for windows
6135	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 For Pump house
6136	Supply, delivery and fixing of G.I Pressed section steel Windows with frameof 100mm x 40mm hallow metal pressed section with 1.25mm thick.The shutters front and back sheet is having vertical and horizontal corrugations.They should be joined together with spot welding.The cost including all necessary fixtures such as holdfasts, aldrops & tower bolts etc., complete as per standard specification and as directed by the departmental authorities.
6137	For Pump house
6138	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities
6139	Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities. For Cutting Toe
6140	Drilling of Bore holesfor 300mm dia. Bored Cast-in-Situ Piles in Sandy and slushy soils including hire and operational charges of all boring equipment, cost of Bentonite powder and bailing out of water including placing of Pile reinforcement grill in position and supply of tremie concrete equipment etc.,complete as per S.S. and as directed by the departmental authorities. For RCC Piers for Service Bridge (50 Rmt.)
6141	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for group piles for RCC Piers for Service Bridge (80 Rmt.)
6142	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) For Pile caps
6143	b) For Piers
6144	c) For Intermediate Braces
6145	d) For Carriage Slab Beams
6146	e) For Carriage Slab
6147	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
6148	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
6149	Supply, delivery, lowering and keeping in position ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538.conveyance to work spot and stacking care fully at site etc.complete as per S.S 600mm dia. for fixing to Infiltration gallery connecting main
6150	Supply and delivery of 600mm dia. centrifugally cast (spun) Ductile Iron tail piece fitting with required flanged (welded) ends and socket end confirming to specification No.IS 8329/2000 with cement lining inside the pipe, out side Zinc coating including cost of fitting, VAT and other duties. The rate including transportation and conveyance to work spot and fixing in position etc., complete as per S.S and as directed by the departmental authorities for finished item of work. 600mm dia. for fixing to Infiltration gallery connecting main
6151	Supply and delivery of C.I/M.S 12.0Mt. long operating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities.
6152	Supply and erection of MS Gantry girder with Chain pulley arrangements as per the approved designs and drawings
6153	Supply and fixing of Alluminium Ladder made out of suitable sections for access from floor slab to Base slab
6154	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
6155	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
6156	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
6157	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
6158	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
6159	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
6160	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
6161	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/ Crystal/ Havells/ HPL
6162	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
6163	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
6164	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
6165	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
6166	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
6167	Laying of 600mm dia. D.I. K7 Clear Water Gravity main from Infiltration Gallery Inspection well to Collection well at Thotla valluru
6168	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.For 600mm dia. D.I K7 Gravity main from Inspection well to collection wella) up to 3.0Mts. Depth
6169	b) from 3.0Mts. to 6.00Mts.
6170	Supply and delivery of D.I. Socket and spigot centrifugally cast (spun) Ductile Iron pressure pipes of K-7 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.600mm dia.
6171	Supply, delivery and lowering of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including all Taxes and other duties except GST etc.,complete as per S.S. and as directed by the departmental authorities. for 600mm dia. Gravity main
6172	Supply and delivery Rubber Gaskets suitable for D.I. S/s Pipes manufacture as per BIS No. 12820/89 with S.B.R quality rubber confirming to BIS No.5382/85 including cost of Rubber gasket including transportation to work spot, excluding tax other duties etc., complete as per S.S and as directed by the departmental authorities( Rate +CP=525+71.48)600mm dia.
6173	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 600mm dia.
6174	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities. 600mm dia.
6175	Supply and delivery of Cast Iron Pipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including cost of Pipes & fittings including all Taxes and other duties except GST including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.For C.I.Pipes and Specials
6176	Jointing of CI/DI Pipes, fittings with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per BIS No.3114/85. a) 600mm dia.
6177	Jointing CI/DI/MS pipes & fittings with s/s ends including cost of pig lead, hemp yarn andsundriessuchas cost offuel formelting lead, filling with water with lead up to 500m and testing torequired pressure complete as per BIS No.3114/94/12288:1997a) 600mm dia.
6178	Lowering of C.I./D.I. Pipes & fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/85. a) 600mm dia.
6179	Supply and delivery of M.S.Pipes and fittings of 8mm thick for non-standard size specials with 6mm thick SRC Cement Mortar lining inside and Apoxy coating out sideincluding transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities for finshed item of work. for 600mm dia. Gravity main
6180	Construction of Anchor blockswith C.C. (1:2:4) nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities.
6181	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.
6182	Fabrication, supply, delivery and erection of Machine ends made out of 20mm thick M.S Plate suitable for push-on joints with rubber gaskets including cost and conveyance of all materials and all labour charges including fabrication and erection etc., complete as per S.S and as directed by the departmental authorities . 600mm dia.
6183	Construction of 6.10 x 3.65m chlorine plant and store room at Proposed Sump cum Pump House at Thotla valluru
6184	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means column footings & steps
6185	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling column footings , steps &For basement
6186	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6187	Providing PCC 1:3:6using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6188	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix unit 1.00cumRectangular portion
6189	Pedestals
6190	Columns
6191	Plinth beam
6192	Lintel beams
6193	Roof Beams
6194	Roof slab0.125m thick,
6195	Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end
6196	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6197	1st floor Parapet wall
6198	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6199	1st floor Parapet wall
6200	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling slab area
6201	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring For flooring & steps
6202	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side) Plastering areaGF,Plastering areaFF,Ceiling area& Sunshades
6203	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work -
6204	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Windows1.50x1.20m
6205	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
6206	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
6207	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
6208	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
6209	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps Rain water pipes
6210	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
6211	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
6212	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
6213	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
6214	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
6215	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
6216	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
6217	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
6218	S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
6219	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
6220	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
6221	voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs
6222	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
6223	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete.BLD-ELEC-9.7.35
6224	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete BLD-ELEC-9.7.36
6225	Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete. BLD-ELEC-7-9-3
6226	Providing 400 mm D.I. K9clear water pumping main from Collection well at Thotlavalluru to proposed sump at WTP
6227	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.
6228	Manual means 30%
6229	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
6230	Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H
6231	Ordinery soils-Mechanical Means Upto 3 m depth 70%
6232	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
6233	Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H
6234	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
6235	Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H
6236	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
6237	Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes.
6238	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
6239	400 mm dia DI K9 fromclear water pumping main from Collection well at Thotlavalluru to WTP
6240	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
6241	400 mm dia
6242	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.
6243	250mm dia 2.00m long DI DF pipes
6244	250mm dia 1.00m long DI DF pipes
6245	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including all Taxes and other duties except GST etc.,complete as per S.S. and as directed by the departmental authorities.
6246	DI flanged sockets for sluice valves and swing check valves 3+1,DI flanged spigots for sluice valves and swing check valves 3+1,for 400 x400x300mm dia all Flanged TEES ,for 400 x400x250mm dia all Flanged TEESfor scour,for 400 x400x80mm dia all Flanged TEESfor Air valves and Air release valves 3+1,400 mm 90 degrees bends,400 mm 45 degrees bends,DI flanged sockets for Tees and bends,DI flanged spigots for Tees and bends
6247	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
6248	DI flanged sockets for sluice valves and swing check valves 3+1, DI flanged spigots for sluice valves and swing check valves 3+1,for 400 x400x300mm dia all Flanged TEES,for 400 x400x80mm dia all Flanged TEESfor Air valves and Air release valves 3+1,400 mm 90 degrees bends,400 mm 45 degrees bends,400 mm 45 degrees bends,DI flanged sockets for Tees and bends,DI flanged spigots for Tees and bends
6249	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
6250	400 mm dia
6251	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S
6252	400 mm Ø DI D/F valve - PN16 formain
6253	80mm dia. PN16 on 400mm line for isolating air valve
6254	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
6255	80mm dia. PN16
6256	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.
6257	400 mm dia
6258	Manufacture and supply of- Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mmPN 16
6259	80mm dia. PN16
6260	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
6261	400 mm dia
6262	80mm dia. PN16 on 400mm line for isolating air valve
6263	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
6264	80 mm dia
6265	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
6266	For Thrust Blocks
6267	Construction of Anchor blockswith C.C. (1:2:4) nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities.
6268	For Anchor Blocks
6269	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying and grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of binding wire and all labour charge etc., complete as per SS and directed by the departmental authorities
6270	Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work
6271	400 mm dia
6272	Construction of RCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work
6273	For 80 mm dia. Air Valves
6274	Shifting of existing Electrical Pole lying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete
6275	For laying of Pumping main
6276	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
6277	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
6278	400 mm dia
6279	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using crusher stone dustfor road restoration
6280	400 mm dia
6281	Plain cement concrete (1:4:8) using 40mm graded m/c SS5 HBG metal including machine mixing, centering, laying, vibrating, finishing curing etc for CC pavemants
6282	400 mm dia
6283	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD.item RBR-CCPV-5 of standard data
6284	400 mm dia
6285	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe.
6286	800 mm dia For Canal Crossings
6287	Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, but excluding taxes & duties, etc
6288	400 mm dia outer pipe For Canal Crossings
6289	Supply and erection of 3x40 KW VT Pumpsets at Thotlavalluru
6290	Supply, delivery and erection of 3 X 40.00 kwelectrically driven horizontal foot mounted heavy duty ball bearing type C.Fclear water pump sets. The pump should be fitted with S.S / Bronzeimpiller, S.Sshaft as per IS spesification with casing of heavy duty and gland packing capable of discharging of 50 LPS at total head of 60mtrs. operated at required RPM coupled to5 KW suitable for operationon combined variation of +/-10%AC Supply. Motor with Class ‘F” insulation and suitable for ambient tempareture up to 500 C S1 duty continuous rated and performance in general conform to IS325. The rate excluding GST etc.complete.
6291	3x40.00 Kw CF Pumpsets Each with a duty of 50 LPS and a total head of 60 m at Thotlavalluru
6292	Design, fabrication, supply, delivery of suitable size of control panel of floor mounted type with bus - bar of aluminum buddi, required capacity MCBs, Starters, Meters, capcitors, control circutes with internalwirining and with indicatinglamps of ISI make and proper earthing two sides with copper buddi to copper plate earthing as per I.E standards. The rate including cost and conveyance of all required materials and all labour and transportation charges etc. complete and and as directed (Internals of panel board and starters ofmake L&T/Siemens/C&S/Telemechanics / Kilburn.\")a) Volt Meter with selector switch b) Ammeter with selector switchc) Power factor indicator meter with switch controls.d) 3 Ph energy meterf) Hour metersg) Suitable capacitors h) Suitable fusesi) Incoming and out going suitable range MCCB\"Sj) Controls with indication lamps like pump on, pump fault, supply on, low level, seal fail etc.
6293	Supply of 240 Sqmm3.5 Core.XLPE PVC armoured alluminium cable of makes Polycab / RPG / Finolex /Havells / Paragon / V-Guard.
6294	for Raw water pump sets
6295	Supply and delivery , of M.S.pipes and fittings of 10mm thick for non-standard size specials with 6mm thick SRC Cement Mortar lining inside and Apoxy coating out side excluding taxes, transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities for finshed item of work.
6296	200 mm dia 12mm thick 0.60m longDF,400 mm dia 12mm thick headder pipe1.00m long DF wth 200 mmpipe 0.40m long branch welding, 400 mm DF bends,400 mm DF pipes 0.60 m long,400x400 x100 all flanged TEE for Air valve.
6297	Centrifugally cast(spun) Ductile iron pressure pipes with flanges welded ends for water gas,sewage confirming to IS 8329/2000 in standard lengthsof 1,2,3,4,5m for clasification K9 with cement mortor lining inside the pipes with out side zinc coating ,rates are ex factory including transportation,taxes,duties etc
6298	200 mm dia 2.00m long
6299	200 mm dia 1.00m long
6300	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including all Taxes and other duties except GST etc.,complete as per S.S. and as directed by the departmental authorities.
6301	Lowering the MS Fittings of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
6302	200 mm dia 12mm thick 0.60m longDF,200 mm dia 2.00m long,200 mm dia 1.00m long,200 mm 90 degrees DI DF bends
6303	400 mm dia 12mm thick headder pipe 1.00m long DF wth 200 mmpipe 0.40m long branch welding,400 mm DF bends,400 mm DF pipes 0.60 m long,400x400 x100 all flanged TEE for Air valve
6304	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.
6305	200 mm dia specials and valves
6306	400 mm dia specials and valves
6307	100 mm dia air valve, specials
6308	Supply and delivery of PN16 D.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S
6309	a) 200mm Sluice valve
6310	b) 400mm Sluice valve
6311	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.
6312	a) 200mm Swing check valve
6313	b) 400mm Swing check valve
6314	Supply and delivery of PN16 Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
6315	100mm Air valve
6316	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves
6317	200mm dia sluice valves , 200mm Swing check valve
6318	400 mm dia sluice valves,b) 400mm Swing check valve
6319	100 mm dia Air valves
6320	Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete
6321	400 mm dia
6322	Name of the work :-Errection of 500 KVA transformer at ProposedCollection Well at Thotla Valleru Transformer yard 15.00x12.00m
6323	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
6324	Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113
6325	Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111
6326	Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110
6327	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
6328	Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105
6329	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
6330	Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097
6331	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
6332	A) Earth Electrodes
6333	B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146
6334	C) Epoxy insulators
6335	D) No.\"8\" SWG Copper wire. MAT 04141
6336	Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04046e 500KVA
6337	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
6338	LT panel
6339	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
6340	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
6341	Incoming
6342	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6343	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
6344	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
6345	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
6346	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
6347	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
6348	g).3RYB Phase indication lamps with leds
6349	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
6350	Out-Going
6351	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6352	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6353	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6354	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6355	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
6356	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
6357	.KWH digital meter fro lighting section
6358	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
6359	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
6360	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
6361	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
6362	Supply and Laying of 3C X 95Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03460
6363	Transformer yard at proposed SS tank
6364	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
6365	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
6366	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6367	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM20 design mix concrete
6368	column footings
6369	Columns1.20-0.10-0.10-0.30+1.80
6370	Plinth beam2(15+12)=54-gate3.00=51.00
6371	Colourwashing two coats using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
6372	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
6373	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
6374	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
6375	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
6376	supply and filling the transformer yard with 40mm HBG metal m/c
6377	Supply, Delivery and Installation of online Bleaching Chlorine Dosers
6378	Earth work excavation for stractures as per drawing and technical specificcations cluase 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per technical specificaiton 305 MORD/304 MORTH
6379	For platforms
6380	Sand Fillingas per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
6381	For platforms
6382	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6383	Brick Masonary (1:5) withBricks Traditional size 23x11x7cm.2nd class including cost and conveyace of all materials and all other labour charges.
6384	For platforms
6385	Plastering in CM (1:3) 12 mm thick using SRC including cost and conveyance of all materials, labour for mixing material, laying and curing etc., complete
6386	For platforms
6387	Manufacturing, Supply, Delivery and Installation Bleaching/Liquid Chlorine Doser 7kg/batch (48000 gallons) capacity.1) Doser with S.S.make body slong with input, output Brass Valves,2) Cilicon hose-pipes,3) 100 Ltrs. Capacity Mixing Jar (Tub) with all necessaries including cost of all taxes, transportation and labour charges etc.,
6388	Construction of Staff Quarter at Sump cum Pump House at Thotla Valluru
6389	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthf
6390	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundations of cc drains and pipe line trench-sand filling
6391	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6392	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix
6393	column footings,Flat portion & Tripizoidal portion
6394	Columns
6395	Plinth beam
6396	Lintle beams
6397	Roof Beams
6398	Roof slab
6399	Sunshades
6400	Loft slab
6401	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6402	1st floor,parapet wall
6403	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6404	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6405	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
6406	Colourwashing two coats Using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
6407	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
6408	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
6409	Door -D - 1.20X2.10 m
6410	doorsD1 -1.0X2.10m
6411	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
6412	windows 1.20x1.20m
6413	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work
6414	Toilet door D2
6415	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work
6416	Toilet door D2
6417	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
6418	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
6419	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
6420	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
6421	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
6422	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
6423	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
6424	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
6425	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
6426	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
6427	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
6428	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
6429	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/Crystal/Havells/HPL
6430	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
6431	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
6432	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
6433	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
6434	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
6435	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
6436	Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm size
6437	Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components
6438	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
6439	Supply of 110 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
6440	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
6441	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
6442	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
6443	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
6444	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
6445	25 mm dia nominal bore -from tank to jn forof individual lines
6446	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
6447	15 mm dia nominal bore -for internal
6448	S&F of GI &GM fittings
6449	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
6450	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
6451	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
6452	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
6453	S& F GI union Ist Quality
6454	12.70mm
6455	19.05mm
6456	25.40mm
6457	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
6458	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
6459	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6460	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6461	Cement plasteringusing opc in cm(1:4) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6462	RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A
6463	Construction of ELSRS With the following specification800 kl capacitywith a staging of 18 m, with Seismic analysis.
6464	Construction of ELSRS With the following specification1500 kl capacity with a staging of 18 m, with Seismic analysis.
6465	Construction of ELSRS With the following specification500 kl capacitywith a staging of 18 m, with Seismic analysis.
6466	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.
6467	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth Ordinery soils-Mechanical Means Upto 3 m depth 70%
6468	Collection and Supply of Sand for filling in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHincluding cost and conveyance to work spot and all labour charges for filling, sectioning etc.complete as per S.S
6469	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
6470	350 mm dia DI K9 fromat KCP Colony Jn to Jn F at Near Siva Temple
6471	300 mm dia DI K9 from Jn F Near Siva Temple to Proposed 1500 Kl ELSR at High School
6472	250 mm dia DI K9fromat KCP Colony Jn to Floura Public School Jn and 800 Kl ELSR at Floura Public School,250 mm dia DI K9fromat KCP Colony Jn to Floura Public School Jn and 800 Kl ELSR at Floura Public School
6473	200 mm dia DI K9 from Jn at Siva Temple to Gurazada Jn
6474	150mm dia DI K9 from Gurazada Jn to Existing 250 kl ELSR AT Gurazada & Gurazada JN to Proposed Nangannagudem ELSR 200 KL and Floura jn to Existing250 Kl Elsr ar Rajendra Nagar
6475	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
6476	400mm dia DI K9
6477	350 mm dia DI K9 fromat KCP Colony Jn to Jn F at Near Siva Temple
6478	300 mm dia DI K9 from Jn F Near Siva Temple to Proposed 1500 Kl ELSR at High School
6479	250 mm dia DI K9fromat KCP Colony Jn to Floura Public School Jn and 800 Kl ELSR at Floura Public School,250 mm dia DI K9fromat KCP Colony Jn to Floura Public School Jn and 800 Kl ELSR at Floura Public School
6480	200 mm dia DI K9 from Jn at Siva Temple to Gurazada Jn
6481	150mm dia DI K9 from Gurazada Jn to Existing 250 kl ELSR AT Gurazada & Gurazada JN to Proposed Nangannagudem ELSR 200 KL and Floura jn to Existing250 Kl Elsr ar Rajendra Nagar
6482	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
6483	400 mm dia
6484	300mm dia
6485	250mm dia
6486	200mm dia
6487	150mm dia
6488	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.
6489	for Scours
6490	350 mmmains-250mm dia scour
6491	250mm dia 2.00m long DI DF pipes
6492	250mm dia 1.00m long DI DF pipes
6493	300 mmmains-200mm dia scour
6494	200mm dia 2.00m long DI DF pipes
6495	200mm dia 1.00m long DI DF pipes
6496	250 mmMains-200mm dia scour
6497	200mm dia 2.00m long DI DF pipes
6498	200mm dia 1.00m long DI DF pipes
6499	200 mmMains-150mm dia scour
6500	150mm dia 2.00m long DI DF pipes
6501	150mm dia 1.00m long DI DF pipes
6502	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including all Taxes and other duties except GST etc.,complete as per S.S. and as directed by the departmental authorities.
6503	for 350 mm dia Pumping main
6504	Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
6505	for 350 mm dia Pumping main
6506	300 mm dia
6507	250 mm Dia
6508	200 mm dia
6509	150 mm dia
6510	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
6511	400 mm dia
6512	300 mm dia
6513	250 mm dia
6514	200 mm dia
6515	150 mm dia
6516	80 mm dia
6517	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S
6518	400mm Ø DI D/F valve - PN16 formain
6519	300mm Ø DI D/F valve - PN16 formain
6520	250mm Ø DI D/F valve - PN16 formain
6521	200mm Ø DI D/F valve - PN16 for scour
6522	150mm Ø DI D/F valve - PN16 for scour
6523	80mm dia PN16 for isolating Air valves
6524	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
6525	80mm dia. PN16
6526	Manufacture, Supply and delivery ofDI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes.
6527	400 mm dia
6528	300 mm dia
6529	250 mm dia
6530	200 mm dia
6531	150 mm dia
6532	Manufacture and supply of- Air Release – Vacuum Break – Surge Alleviation” Valve for potable water. Construction material Cylindrical Body of Ductile Iron GGG-50/SG-500-7, Three cylindrical Floats of High Density Poly Ethylene. Baffle Plate, Orifice venture and all construction bolts of stainless steel, coating internally and externally. Electrostatically applied epoxy (1) Flange connection as per IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mmPN 16
6533	80mm dia. PN16
6534	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
6535	400 mm dia
6536	300 mm dia
6537	250 mm dia
6538	200 mm dia
6539	150 mm dia
6540	80mm dia PN16 for isolating Air valves
6541	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
6542	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
6543	Construction of Anchor blockswith R.C.C. (1:2:4) nominal mix using 20mm HBG crushed metal from approved quarry including cost and conveyance of all materials, seignorage charges and all labour charges for machine mixing, laying, vibrating and curing including centering charges etc.,complete as per S.S and as directed by the departmental authorities.
6544	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying and grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of binding wire and all labour charge etc., complete as per SS and directed by the departmental authorities
6545	Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work
6546	400 mm dia
6547	300 mm dia
6548	250 mm dia
6549	200 mm dia
6550	150 mm dia
6551	Construction of RCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sfor finished item of work
6552	Shifting of existing Electrical Pole lying on the Pipe line alignment including shifting charges payble to AP Transco and other incidental charges etc.,complete
6553	Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
6554	Cutting and open of C.C. Road surfaceincluding stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
6555	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.using crusher stone dustfor road restoration
6556	Plain cement concrete (1:4:8) using 40mm graded m/c SS5 HBG metal including machine mixing, centering, laying, vibrating, finishing curing etc for CC pavemants
6557	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 MORD.item RBR-CCPV-5 of standard data
6558	Barricading ,hoarding,lighting and watching etc for water supply and sewerage works for trenches upto 6 feet-( 2m) below GL
6559	Railway crossings / Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe.
6560	800 mm dia
6561	Manufacture, Supply and Delivery ofM.S Pipes Conforming toIS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mmincluding cost of all materials,Labour charges, transportation to anywhere in AP, but including taxes & duties, etc
6562	800 mm dia outer pipe
6563	for Bye Pass road & Main road crossings
6564	Cost of Laying, Jointing, Hydrostatic filed test pressure, including cost of site welding, jointing materials and cost of transportation of water including emptying pipe line after completion of filed testing
6565	800 mm dia outer pipe
6566	for Bye Pass road & Main road crossings
6567	Supply and placing in position of M.S Pipes of 8 mm thick including cost and conveyance to work spot and placing in position for water carrying pipe
6568	150 mm dia
6569	Provision for Pedastal Bridge
6570	Construction of staff quarters at ELSR\"S Premises and proposed 8.00 MLD WTP (3+1 )=4
6571	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depthf
6572	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundations of cc drains and pipe line trench-sand filling
6573	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6574	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etcM20 design mix
6575	column footings
6576	Columns
6577	Plinth beam
6578	Lintle beams
6579	Roof Beams
6580	Roof slab
6581	Sunshades
6582	Loft slab
6583	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6584	parapet wall
6585	Cement plasteringusing opc in cm(1:5) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6586	parapet wall
6587	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height
6588	Colourwashing two coats Using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
6589	Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
6590	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
6591	Door -D - 1.20X2.10 m
6592	doorsD1 -1.0X2.10m
6593	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
6594	Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work
6595	Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work
6596	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
6597	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor floorring
6598	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
6599	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
6600	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps
6601	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
6602	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
6603	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
6604	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
6605	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
6606	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
6607	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
6608	S&F of 63 Amps415 V TPN swich disconnector fuse unit cubical type without fuses of makes Standard/Crystal/Havells/HPL
6609	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
6610	S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc-- 63 AFP isolator-1 no for incomer,6-32ASPMCBS -18 Nos for out going
6611	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
6612	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
6613	Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.
6614	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
6615	Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm size
6616	Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components
6617	Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock
6618	Supply of 110 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
6619	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
6620	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
6621	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
6622	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
6623	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
6624	25 mm dia nominal bore -from tank to jn forof individual lines
6625	20 mm dia nominal bore -fromjn forof individual lines to toilets & Kitchen
6626	15 mm dia nominal bore -for internal
6627	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
6628	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
6629	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
6630	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
6631	12.70mm
6632	19.05mm
6633	25.40mm
6634	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
6635	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
6636	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
6637	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
6638	Cement plasteringusing opc in cm(1:4) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
6639	RCC M-20 Nominal mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A
6640	Environmental Monitoring Cost in Pre-Construction and During Construction (Two years Period)
6641	Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations)once in a month duringthe Pre-Construction periodand once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
6642	Noiselevel(5Monitoringstations)onceina season during the Pre-Construction period and once in a season forthree seasons (10Monitoringstations) during the constructionperiodat Intake well,Sump& PH,FiltrationPlant/WTP,ELSRs,Pipelines &Distribution network
6643	Water Quality Monitoring surface / ground(5 Monitoring stations)once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during theconstructionperiod atIntakewell,Sump&PH,Filtration Plant/WTP, ELSRs, Pipelines& Distribution network
6644	Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5)
6645	Cutting of Trees and removal
6646	Health checkups and free medical distribution
6647	Awareness program/training
6648	Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism:Sprinkling of watertwice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of watertwice in a day for 1 vehicles x 100 days (excluding rainy days) during Operationalphase.
6649	Project Information Boards - Setting up of Sign boards, Posters, barricades etc.
6650	Construction ofSCADA Room 8.00 x 12.00 Size at WTP.
6651	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
6652	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
6653	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
6654	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
6655	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
6656	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
6657	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
6658	Pedastals around Columns
6659	Columns Up to plinth
6660	Plinth Beams 300 x 400
6661	Columns
6662	Up to First Floor Roof Level
6663	Beams 230 x 500
6664	Lintels
6665	Sunshades
6666	Staircase slab 0.15 m thick
6667	RCC slab 0.15 m thick
6668	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
6669	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).
6670	For First Floor Level
6671	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
6672	First floor
6673	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. For walls
6674	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work. For ceiling
6675	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
6676	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
6677	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
6678	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
6679	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) - Inside walls
6680	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) - Ceiling
6681	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
6682	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
6683	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
6684	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
6685	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
6686	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
6687	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
6688	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
6689	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
6690	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
6691	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
6692	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
6693	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
6694	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
6695	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
6696	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
6697	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
6698	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
6699	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
6700	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
6701	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.2
6702	Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
6703	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
6704	Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
6705	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
6706	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
6707	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
6708	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
6709	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
6710	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
6711	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
6712	Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
6713	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
6714	25 mm dia nominal bore -from tank to jn forof individual lines and inlet
6715	20 mm dia nominal bore -fromjn forof individual lines to toilets
6716	15 mm dia nominal bore -for internal
6717	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
6718	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
6719	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
6720	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
6721	12.70mm
6722	19.05mm
6723	25.40mm
6724	pumping system
6725	Providing Raw Water Pumping system at Pelluru canal by supply, delivery and erection ofVT pump set with specifications ofHead range of 15 mtrs, discharge of 353 M3/Hr for Raw Water(1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. ***NOTE:Check detailed estimate for detailed description.
6726	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.**NOTE:Check detailed estimate for detailed description.
6727	Providing Raw Water Pumping system at thotla valluruby supply, delivery and erection ofVT pump set with specifications ofHead range of64 mtrs, discharge of 184 M3/Hr for Clear Water(2 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.**NOTE:Check detailed estimate for detailed description.
6728	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.**NOTE:Check detailed estimate for detailed description.
6729	Supply, delivery and erection ofHSC pump set with specifications ofHead range of 42 mtrs, discharge of 177 M3/Hr for Raw Water(2 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.**NOTE:Check detailed estimate for detailed description.
6730	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.**NOTE:Check detailed estimate for detailed description.
6731	Arranging Instrumantation and Automation of the Pumping System,Reservoir Inlet Management, 24 x 7 Water Supply ::DMA Management ,AMI Water Meter Management and Local SCADA Control Sation:
6732	Instrumantation and Automation of the Pumping System:
6733	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
6734	For Raw Water Pumping Station as per the above specification
6735	For Clear Water Pumping Station-1 as per the above specification
6736	For Clear Water Pumping Station-2 as per the above specification
6737	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6738	For Raw Water Pumping Station as per the above specification
6739	For Clear Water Pumping Station-1 as per the above specification
6740	For Clear Water Pumping Station-2 as per the above specification
6741	Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties For Clear Water Pumping Station-1 as per the above specification
6742	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
6743	DN 250 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification
6744	DN 150 - PN 16 pump control valve for Clear Water Pumping Station-1 as per the above specification
6745	DN 150 - PN 16 pump control valve for Clear Water Pumping Station-2 as per the above specification
6746	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.350MM Dia Above Specification.
6747	outlet of Raw Water Pumping Station at Pelluru canal
6748	Inlet of Raw Water main at WTP
6749	Outlet-1 of Clear Water Pumping main at Pumping station
6750	Outlet -2 of Clear Water Pumping main at Pumping station
6751	Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
6752	Raw Water Inlet of Water Treatment plant
6753	Clear Water outlet of Water Treatment plant
6754	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
6755	Raw Water Inlet of Water Treatment plant
6756	Clear Water outlet of Water Treatment plant
6757	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
6758	Raw Water Inlet of Water Treatment plant
6759	Clear Water outlet of Water Treatment plant
6760	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.Clear Water outlet of Water Treatment plant
6761	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6762	Raw Water Inlet of Water Treatment plant
6763	Clear Water outlet of Water Treatment plant
6764	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
6765	Raw Water inlet and clear water outlet at WTP
6766	Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.
6767	For Raw Water Pumping Station as per the above specification
6768	For Clear Water Pumping Station as per the above specification
6769	Reservoir Inlet Management ::
6770	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.
6771	100MM Dia Above Specification.
6772	Inlet of 250 KL Existing ELSR at Rajendra nagar
6773	Inlet of 250 KL Existing ELSR at Gurazada road
6774	150 MM Dia Above Specification.
6775	Inlet of 800 KL Proposed ELSR at Flora school
6776	Inlet of 500 KL Proposed ELSR at Near dumping yard
6777	250 MM Dia Above Specification.
6778	Inlet of 1500 KL Proposed ELSR at ZPH School
6779	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
6780	100MM Dia Above Specification.
6781	Inlet of 250 KL Existing ELSR at Rajendra nagar
6782	Inlet of 250 KL Existing ELSR at Gurazada road
6783	150 MM Dia Above Specification.
6784	Inlet of 800 KL Proposed ELSR at Flora school
6785	Inlet of 500 KL Proposed ELSR at Near dumping yard
6786	250 MM Dia Above Specification.
6787	Inlet of 1500 KL Proposed ELSR at ZPH School
6788	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
6789	100MM Dia Above Specification.
6790	Inlet of 250 KL Existing ELSR at Rajendra nagar
6791	Inlet of 250 KL Existing ELSR at Gurazada road
6792	150 MM Dia Above Specification.
6793	Inlet of 800 KL Proposed ELSR at Flora school
6794	Inlet of 500 KL Proposed ELSR at Near dumping yard
6795	250 MM Dia Above Specification.
6796	Inlet of 1500 KL Proposed ELSR at ZPH School
6797	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6798	100MM Dia Above Specification.
6799	Inlet of 250 KL Existing ELSR at Rajendra nagar
6800	Inlet of 250 KL Existing ELSR at Gurazada road
6801	150 MM Dia Above Specification.
6802	Inlet of 800 KL Proposed ELSR at Flora school
6803	Inlet of 500 KL Proposed ELSR at Near dumping yard
6804	250 MM Dia Above Specification.
6805	Inlet of 1500 KL Proposed ELSR at ZPH School
6806	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6807	Inlet of 250 KL Existing ELSR at Rajendra nagar
6808	Inlet of 250 KL Existing ELSR at Gurazada road
6809	Inlet of 800 KL Proposed ELSR at Flora school
6810	Inlet of 500 KL Proposed ELSR at Near dumping yard
6811	Inlet of 1500 KL Proposed ELSR at ZPH School
6812	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
6813	Inlet of 250 KL Existing ELSR at Rajendra nagar
6814	Inlet of 250 KL Existing ELSR at Gurazada road
6815	Inlet of 800 KL Proposed ELSR at Flora school
6816	Inlet of 500 KL Proposed ELSR at Near dumping yard
6817	Inlet of 1500 KL Proposed ELSR at ZPH School
6818	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
6819	Inlet of 250 KL Existing ELSR at Rajendra nagar
6820	Inlet of 250 KL Existing ELSR at Gurazada road
6821	Inlet of 800 KL Proposed ELSR at Flora school
6822	Inlet of 500 KL Proposed ELSR at Near dumping yard
6823	Inlet of 1500 KL Proposed ELSR at ZPH School
6824	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6825	Inlet of 250 KL Existing ELSR at Rajendra nagar
6826	Inlet of 250 KL Existing ELSR at Gurazada road
6827	Inlet of 800 KL Proposed ELSR at Flora school
6828	Inlet of 500 KL Proposed ELSR at Near dumping yard
6829	Inlet of 1500 KL Proposed ELSR at ZPH School
6830	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
6831	Inlet of 250 KL Existing ELSR at Rajendra nagar
6832	Inlet of 250 KL Existing ELSR at Gurazada road
6833	Inlet of 800 KL Proposed ELSR at Flora school
6834	Inlet of 500 KL Proposed ELSR at Near dumping yard
6835	Inlet of 1500 KL Proposed ELSR at ZPH School
6836	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6837	Inlet of 250 KL Existing ELSR at Rajendra nagar
6838	Inlet of 250 KL Existing ELSR at Gurazada road
6839	Inlet of 800 KL Proposed ELSR at Flora school
6840	Inlet of 500 KL Proposed ELSR at Near dumping yard
6841	Inlet of 1500 KL Proposed ELSR at ZPH School
6842	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6843	Inlet of 250 KL Existing ELSR at Rajendra nagar
6844	Inlet of 250 KL Existing ELSR at Gurazada road
6845	Inlet of 800 KL Proposed ELSR at Flora school
6846	Inlet of 500 KL Proposed ELSR at Near dumping yard
6847	Inlet of 1500 KL Proposed ELSR at ZPH School
6848	Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6849	Inlet of 250 KL Existing ELSR at Rajendra nagar
6850	Inlet of 250 KL Existing ELSR at Gurazada road
6851	Inlet of 800 KL Proposed ELSR at Flora school
6852	Inlet of 500 KL Proposed ELSR at Near dumping yard
6853	Inlet of 1500 KL Proposed ELSR at ZPH School
6854	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6855	Inlet of 250 KL Existing ELSR at Rajendra nagar
6856	Inlet of 250 KL Existing ELSR at Gurazada road
6857	Inlet of 800 KL Proposed ELSR at Flora school
6858	Inlet of 500 KL Proposed ELSR at Near dumping yard
6859	Inlet of 1500 KL Proposed ELSR at ZPH School
6860	24 x 7 Water Supply ::DMA Management ::
6861	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.
6862	150MM Dia Above Specification.
6863	Inlet of DMA-3 under 800 KL ELSR at Flora public school zone -1
6864	200MM Dia Above Specification.
6865	Inlet of DMA-1&2 under 800 KL ELSR at Flora public school zone -1
6866	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
6867	150MM Dia Above Specification.
6868	Inlet of DMA-3 under 800 KL ELSR at Flora public school zone -1
6869	200MM Dia Above Specification.
6870	Inlet of DMA-1&2 under 800 KL ELSR at Flora public school zone -1
6871	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
6872	150MM Dia Above Specification.
6873	Inlet of DMA-3 under 800 KL ELSR at Flora public school zone -1
6874	200MM Dia Above Specification.
6875	Inlet of DMA-1&2 under 800 KL ELSR at Flora public school zone -1
6876	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6877	Inlet of DMA-3 under 800 KL ELSR at Flora public school zone -1
6878	200MM Dia Above Specification.
6879	Inlet of DMA-1&2 under 800 KL ELSR at Flora public school zone -1
6880	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
6881	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6882	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
6883	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6884	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6885	Inlet of DMA-1, 2 & 3 under 1000 KL ELSR at Flora public school zone -1
6886	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6887	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6888	Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6889	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6890	Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
6891	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6892	Under 500 KL ELSR at Dumping yard Eginipadu Zone-5
6893	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
6894	Inlet of DMA-1, 2 & 3 under 800 KL ELSR at Flora public school zone -1
6895	AMI Water Meter Management.
6896	Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A.
6897	DN 15 - PN 16 AMR Compatible Mechanical Water Meter as per above specification for all reservoirs comman area
6898	Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-B
6899	Under DMA-1 ,2&3 under 800 KL ELSR at Flora public school zone -1 with above specifications
6900	Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.
6901	Establishment of HARDWARE for Individual Local Control Station at Individual ULB ::
6902	Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
6903	Development of Softwares for Individual Local Control Station at Individual ULB ::
6904	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
6905	Distribution Network in Zone - I
6906	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches
6907	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
6908	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
6909	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stackingas per S.S 110 mm OD
6910	160 mm OD.
6911	200 mm OD
6912	250 mm OD
6913	a) Pipe ends - long neck 110 mm OD
6914	160 mm OD.
6915	200 mm OD
6916	250 mm OD
6917	b) MS Flanges 110 mm OD
6918	160 mm OD.
6919	200 mm OD
6920	250 mm OD
6921	c) End Caps 110 mm OD
6922	160 mm OD.
6923	200 mm OD
6924	d) Reducers 110X125 mmdia
6925	125x140 mm dia
6926	140x160 mm dia
6927	160x180 mm dia
6928	180x200 mm dia
6929	200x225 mm dia
6930	225x250 mm dia
6931	280x250mm
6932	e) TEES110 mm OD
6933	160 mm OD.
6934	200 mm OD
6935	250 mm OD
6936	F)BENDS 110 mm OD
6937	160 mm OD.
6938	200 mm OD
6939	250 mm OD
6940	Supply and delivery of CIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.
6941	Plain end Specials - 350 x350 x 200 mm TEE , 350 x 350 x 100 mm TEE , 350 mm plain bends90 degrees
6942	Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers , 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE , 150 x 100 plain reducers , 150 end caps , 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours ,100 x 100 x 80 mm air TEE , 100 end caps.
6943	flanged tail pieces - 200 mm tail peces for sluice valve , 200mm tail peces for air tee , 150 mm tail peces for sluice valve , 150 mm tail peces for sluice valve for scour , 150mm tail peces for air tee , 150 mm DF Duck foot bends , 150 semi circular bends , 150 mm DF pipes 2.00 m long , 150 mm DF pipes 1.00 m long , 100 mm DF pipes 2.00 m long , 100 mm DF pipes 1.00 m long , 100 mm tail peces for sluice valve , 100 mm tail peces for Air valve ,100 mm dia deck foot bends , 100 semi circular bends , 80 mm dia deck foot bends , 80 semi circular bends, 80 mm DF pipes 2.00 m long for scours , 80 mm DF pipes 1.00 m long for scours .
6944	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S110 mm OD
6945	160 mm OD.
6946	200 mm OD
6947	250 mm OD
6948	Supply, delivery,ofD.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including conveyance to work spot and stacking care fully at site etc.complete as per S.S 200 mm for sluice valves
6949	150mm for sluice valves
6950	100 mm for sluice valves
6951	150mm dia for scour
6952	100mm dia for scour
6953	80mm dia for scour
6954	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
6955	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm for sluice valves
6956	150mm for sluice valves
6957	100 mm for sluice valves
6958	150mm dia for scour
6959	100mm dia for scour
6960	80mm dia for scour
6961	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
6962	Construction of Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work200 mm for sluice valves
6963	150mm for sluice valves
6964	100 mm for sluice valves
6965	150mm dia for scour
6966	100mm dia for scour
6967	80mm dia for scour
6968	80mm dia Air valve
6969	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Flanged)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 Plain end Specials350 mm dia - 350 x350 x 200 mm TEE , 350 x 350 x 100 mm TEE , 350 mm plain bends90 degrees.
6970	200 mm dia - 200 x 200 x 200 mm TEE ,200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers.
6971	150 mm dia - 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE, 150 x 100 plain reducers , 150 end caps.
6972	100 mm dia - 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours , 100 x 100 x 80 mm air TEE , 100 end caps.
6973	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 350 mm dia
6974	200 mm dia
6975	150 mm dia
6976	100 mm dia
6977	80 mm dia
6978	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
6979	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
6980	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
6981	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORDfor restoration of pipe line trench
6982	Plain Cemment Concrete (1:4:8)using 40mm size HBG metal including cost and conveyance of all materials and all labour charges etc.complete as per S.S
6983	Vibrated Cement concrete design mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
6984	Supply, delivery, installationand integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.(as per Quotation)250 mm OD
6985	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete (rate as per quatation) 300mm dia
6986	Distribution Network in Zone - 2
6987	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches
6988	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
6989	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
6990	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking etc. complete as per S.S HDPE pipes110mm OD
6991	160mm OD.
6992	200mm OD
6993	a) Pipe ends - long neck 110mm OD
6994	160mm OD.
6995	200mm OD
6996	b) MS Flanges 110mm OD
6997	160mm OD.
6998	200mm OD
6999	c) End Caps 110mm OD
7000	160mm OD.
7001	200mm OD
7002	d) Reducers 110X125 mmdia
7003	125x140 mm dia
7004	140x160 mm dia
7005	160x180 mm dia
7006	280x250mm
7007	e) TEES 110mm OD
7008	160mm OD.
7009	200mm OD
7010	F)BENDS 110mm OD
7011	160mm OD.
7012	200mm OD
7013	Supply and delivery of CIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.
7014	Plain end Specials - 350 x350 x 200 mm TEE , 350 x 350 x 100 mm TEE , 350 mm plain bends90 degrees
7015	Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers , 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE , 150 x 100 plain reducers , 150 end caps , 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours ,100 x 100 x 80 mm air TEE , 100 end caps.
7016	flanged tail pieces - 200 mm tail peces for sluice valve , 200mm tail peces for air tee , 150 mm tail peces for sluice valve , 150 mm tail peces for sluice valve for scour , 150mm tail peces for air tee , 150 mm DF Duck foot bends , 150 semi circular bends , 150 mm DF pipes 2.00 m long , 150 mm DF pipes 1.00 m long , 100 mm DF pipes 2.00 m long , 100 mm DF pipes 1.00 m long , 100 mm tail peces for sluice valve , 100 mm tail peces for Air valve ,100 mm dia deck foot bends , 100 semi circular bends , 80 mm dia deck foot bends , 80 semi circular bends, 80 mm DF pipes 2.00 m long for scours , 80 mm DF pipes 1.00 m long for scours .
7017	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S
7018	110mm OD
7019	160mm OD.
7020	200mm OD
7021	Supply, delivery,ofD.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate includingconveyance to work spot and stacking care fully at site etc.complete as per S.S 200 mm for sluice valves
7022	150mm for sluice valves
7023	100 mm for sluice valves
7024	150mm dia for scour
7025	100mm dia for scour
7026	80mm dia for scour
7027	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
7028	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm for sluice valves
7029	150mm for sluice valves
7030	100 mm for sluice valves
7031	150mm dia for scour
7032	100mm dia for scour
7033	80mm dia for scour
7034	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7035	Construction of Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work200 mm for sluice valves
7036	150mm for sluice valves
7037	100 mm for sluice valves
7038	150mm dia for scour
7039	100mm dia for scour
7040	80mm dia for scour
7041	80mm dia Air valve
7042	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Flanged)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 200 mm dia - 200 x 200 x 200 mm TEE ,200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers.
7043	150 mm dia - 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE, 150 x 100 plain reducers , 150 end caps.
7044	100 mm dia - 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours , 100 x 100 x 80 mm air TEE , 100 end caps.
7045	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 200 mm dia
7046	150 mm dia
7047	100 mm dia
7048	80 mm dia
7049	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7050	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7051	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7052	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORDfor restoration of pipe line trench
7053	Plain Cemment Concrete (1:4:8)using 40mm size HBG metal including cost and conveyance of all materials and all labour charges etc.complete as per S.S
7054	Vibrated Cement concrete design mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
7055	Supply, delivery, installationand integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.(as per Quotation) 250 mm OD
7056	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation) 250 mm OD
7057	Distribution Network in Zone - 3
7058	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches
7059	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
7060	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
7061	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S HDPE pipes110mm OD
7062	160mm OD.
7063	200mm OD
7064	a) Pipe ends - long neck 110mm OD
7065	160mm OD.
7066	200mm OD
7067	b) MS Flanges 110mm OD
7068	160mm OD.
7069	200mm OD
7070	c) End Caps 110mm OD
7071	160mm OD.
7072	200mm OD
7073	d) Reducers 110X125 mmdia
7074	125x140 mm dia
7075	140x160 mm dia
7076	160x180 mm dia
7077	180x200 mm dia
7078	200x225 mm dia
7079	280x250 mm dia
7080	e) TEES 110mm OD
7081	160mm OD.
7082	200mm OD
7083	F)BENDS 110mm OD
7084	160mm OD.
7085	200mm OD
7086	Supply and delivery of CIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.
7087	Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers , 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE , 150 x 100 plain reducers , 150 end caps , 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours ,100 x 100 x 80 mm air TEE , 100 end caps.
7088	flanged tail pieces - 200 mm tail peces for sluice valve , 200mm tail peces for air tee , 150 mm tail peces for sluice valve , 150 mm tail peces for sluice valve for scour , 150mm tail peces for air tee , 150 mm DF Duck foot bends , 150 semi circular bends , 150 mm DF pipes 2.00 m long , 150 mm DF pipes 1.00 m long , 100 mm DF pipes 2.00 m long , 100 mm DF pipes 1.00 m long , 100 mm tail peces for sluice valve , 100 mm tail peces for Air valve ,100 mm dia deck foot bends , 100 semi circular bends , 80 mm dia deck foot bends , 80 semi circular bends, 80 mm DF pipes 2.00 m long for scours , 80 mm DF pipes 1.00 m long for scours .
7089	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 110mm OD
7090	160mm OD.
7091	200mm OD
7092	Supply, delivery,ofD.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 200 mm for sluice valves
7093	150mm for sluice valves
7094	100 mm for sluice valves
7095	150mm dia for scour
7096	100mm dia for scour
7097	80mm dia for scour
7098	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
7099	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm for sluice valves
7100	150mm for sluice valves
7101	100 mm for sluice valves
7102	150mm dia for scour
7103	100mm dia for scour
7104	80mm dia for scour
7105	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7106	Construction of Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work200 mm for sluice valves
7107	150mm for sluice valves
7108	100 mm for sluice valves
7109	150mm dia for scour
7110	100mm dia for scour
7111	80mm dia for scour
7112	80mm dia Air valve
7113	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Flanged)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 200 mm dia - 200 x 200 x 200 mm TEE ,200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers.
7114	150 mm dia - 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE, 150 x 100 plain reducers , 150 end caps.
7115	100 mm dia - 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours , 100 x 100 x 80 mm air TEE , 100 end caps.
7116	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 200 mm dia
7117	150 mm dia
7118	100 mm dia
7119	80 mm dia
7120	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7121	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7122	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7123	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORDfor restoration of pipe line trench
7124	Plain Cemment Concrete (1:4:8)using 40mm size HBG metal including cost and conveyance of all materials and all labour charges etc.complete as per S.S
7125	Vibrated Cement concrete design mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
7126	Supply, delivery, installationand integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.(as per Quotation)
7127	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete (rate as per quatation)
7128	Distribution Network in Zone - 4
7129	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches
7130	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
7131	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
7132	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking as per S.S 110mm OD
7133	160mm OD.
7134	200mm OD
7135	a) Pipe ends - long neck 110mm OD
7136	160mm OD.
7137	200mm OD
7138	b) MS Flanges 110mm OD
7139	160mm OD.
7140	200mm OD
7141	c) End Caps 110mm OD
7142	160mm OD.
7143	200mm OD
7144	d) Reducers 110X125 mmdia
7145	125x140 mm dia
7146	140x160 mm dia
7147	160x180 mm dia
7148	180x200 mm dia
7149	200x225 mm dia
7150	225x250 mm dia
7151	e) TEES 110mm OD
7152	160mm OD.
7153	200mm OD
7154	F)BENDS 110mm OD
7155	160mm OD.
7156	200mm OD
7157	Supply and delivery of CIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.
7158	Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers , 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE , 150 x 100 plain reducers , 150 end caps , 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours ,100 x 100 x 80 mm air TEE , 100 end caps.
7159	flanged tail pieces - 200 mm tail peces for sluice valve , 200mm tail peces for air tee , 150 mm tail peces for sluice valve , 150 mm tail peces for sluice valve for scour , 150mm tail peces for air tee , 150 mm DF Duck foot bends , 150 semi circular bends , 150 mm DF pipes 2.00 m long , 150 mm DF pipes 1.00 m long , 100 mm DF pipes 2.00 m long , 100 mm DF pipes 1.00 m long , 100 mm tail peces for sluice valve , 100 mm tail peces for Air valve ,100 mm dia deck foot bends , 100 semi circular bends , 80 mm dia deck foot bends , 80 semi circular bends, 80 mm DF pipes 2.00 m long for scours , 80 mm DF pipes 1.00 m long for scours .
7160	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 110mm OD
7161	160mm OD.
7162	200mm OD
7163	Supply, delivery,ofD.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including conveyance to work spot and stacking care fully at site etc.complete as per S.S
7164	200 mm for sluice valves
7165	150mm for sluice valves
7166	100 mm for sluice valves
7167	150mm dia for scour
7168	100mm dia for scour
7169	80mm dia for scour
7170	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
7171	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm for sluice valves
7172	150mm for sluice valves
7173	100 mm for sluice valves
7174	150mm dia for scour
7175	100mm dia for scour
7176	80mm dia for scour
7177	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7178	Construction of Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work200 mm for sluice valves
7179	150mm for sluice valves
7180	100 mm for sluice valves
7181	150mm dia for scour
7182	100mm dia for scour
7183	80mm dia for scour
7184	80mm dia Air valve
7185	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 200 mm dia - 200 x 200 x 200 mm TEE ,200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers.
7186	150 mm dia - 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE, 150 x 100 plain reducers , 150 end caps.
7187	100 mm dia - 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours , 100 x 100 x 80 mm air TEE , 100 end caps.
7188	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 200 mm dia
7189	150 mm dia
7190	100 mm dia
7191	80 mm dia
7192	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7193	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7194	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7195	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORDfor restoration of pipe line trench
7196	Plain Cemment Concrete (1:4:8)using 40mm size HBG metal including cost and conveyance of all materials and all labour charges etc.complete as per S.S
7197	Vibrated Cement concrete design mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
7198	Supply, delivery, installationand integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.(as per Quotation)
7199	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete excluding CED and other taxes (rate as per quatation) 200mm OD
7200	Distribution Network in Zone - 5
7201	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches
7202	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth
7203	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
7204	Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S HDPE pipes110mm OD
7205	160mm OD.
7206	200mm OD
7207	a) Pipe ends - long neck 110mm OD
7208	160mm OD.
7209	200mm OD
7210	b) MS Flanges 110mm OD
7211	160mm OD.
7212	200mm OD
7213	c) End Caps 110mm OD
7214	160mm OD.
7215	200mm OD
7216	d) Reducers 110X125 mmdia
7217	125x140 mm dia
7218	140x160 mm dia
7219	160x180 mm dia
7220	180x200 mm dia
7221	200x225 mm dia
7222	225x250 mm dia
7223	e) TEES 110mm OD
7224	160mm OD.
7225	200mm OD
7226	F)BENDS 110mm OD
7227	160mm OD.
7228	200mm OD
7229	Supply and delivery of CIPipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 including VAT and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.
7230	Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , Flanged CI specials - 200 x 200 x 200 mm TEE , 200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers , 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE , 150 x 100 plain reducers , 150 end caps , 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours ,100 x 100 x 80 mm air TEE , 100 end caps.
7231	flanged tail pieces - 200 mm tail peces for sluice valve , 200mm tail peces for air tee , 150 mm tail peces for sluice valve , 150 mm tail peces for sluice valve for scour , 150mm tail peces for air tee , 150 mm DF Duck foot bends , 150 semi circular bends , 150 mm DF pipes 2.00 m long , 150 mm DF pipes 1.00 m long , 100 mm DF pipes 2.00 m long , 100 mm DF pipes 1.00 m long , 100 mm tail peces for sluice valve , 100 mm tail peces for Air valve ,100 mm dia deck foot bends , 100 semi circular bends , 80 mm dia deck foot bends , 80 semi circular bends, 80 mm DF pipes 2.00 m long for scours , 80 mm DF pipes 1.00 m long for scours .
7232	Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S 110mm OD
7233	160mm OD.
7234	200mm OD
7235	Supply, delivery,ofD.I D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 200 mm for sluice valves
7236	150mm for sluice valves
7237	100 mm for sluice valves
7238	150mm dia for scour
7239	100mm dia for scour
7240	80mm dia for scour
7241	Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
7242	Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves.200 mm for sluice valves
7243	150mm for sluice valves
7244	100 mm for sluice valves
7245	150mm dia for scour
7246	100mm dia for scour
7247	80mm dia for scour
7248	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7249	Construction of Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work200 mm for sluice valves
7250	150mm for sluice valves
7251	100 mm for sluice valves
7252	150mm dia for scour
7253	100mm dia for scour
7254	80mm dia for scour
7255	80mm dia Air valve
7256	Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Flanged)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 200 mm dia - 200 x 200 x 200 mm TEE ,200 x 200 x 150 mm TEE for main and for scours , 200 x 200 x 100 mm TEE , 200 x 200 x 80 mm air TEE 80 mm side flange , 200 mm plain bends90 degrees , 200 x 100 plain reducers , 200 x 150 plain reducers.
7257	150 mm dia - 150 x 150 x 80 mm air TEE 80 mm side flange , 150 x 150 x 100 TEE for main and for scours , 150 x 150 x 150 TEE, 150 x 100 plain reducers , 150 end caps.
7258	100 mm dia - 100 x 100 x 100 TEE for main, 100 x 100 x 80 TEE for scours , 100 x 100 x 80 mm air TEE , 100 end caps.
7259	Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. 200 mm dia
7260	150 mm dia
7261	100 mm dia
7262	80 mm dia
7263	Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7264	Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7265	Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
7266	Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smoothwheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORDfor restoration of pipe line trench
7267	Plain Cemment Concrete (1:4:8)using 40mm size HBG metal including cost and conveyance of all materials and all labour charges etc.complete as per S.S
7268	Vibrated Cement concrete design mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine CrushedGraded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.
7269	Supply, delivery, installationand integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.(as per Quotation)
7270	Supply,delivery of strainer /dirt box of T type of the following dia suitable to respective meters of same size inclusive of costs,transportation,etc complete (rate as per quatation)
7271	PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE IN EARTHEN ROADS Cost for 633 Nos
7272	PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITESIDE IN EARTHEN ROADS Cost for 633 Nos
7273	Providing house service connections at House Holdside in BT &CCroads Cost for 1687Nos
7274	PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITESIDE IN CC &BT ROADS Cost for 1265 Nos
7275	Providing Technical Graduate with CAD certificate for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge.
7276	Providing the services such as consumer survey and mapping, asset mapping, ground validation, component wise structural and hydraulic designs as per site condition, GIS based hydraulic modelling of all components of both existing and proposed water supply infrastructure and any other documentation/ plan/ designs related to the whole scheme as per the instructions of the Engineer incharge and CPHEEO Manual
7277	Hiring for 1 No Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
7278	Man Power
7279	Personal required for operating Intake/Offtake well/Pump houses
7280	Operator
7281	Fitter/Helper
7282	Watch man
7283	Fitter/Helper
7284	Personal required at operating Water treatment plants & Sump
7285	Operator
7286	Fitter/Helper
7287	Lab Technician
7288	Electrician /Mechanic
7289	Watch man
7290	Personal required at operating Clear water rising mains
7291	Fitter/Helper
7292	Personal required at operating distribution system
7293	Fitter/Helper
7294	Consumables
7295	A) Chlorine gas for Disinfection @ 3 mg/Lt
7296	Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines.
7297	7 Years
7298	B) Alumino -Ferric (Alum) @ 20 mg/Lt
7299	Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement at 15 mg/lit
7300	B) Alumino -Ferric (Alum) @ 20 mg/Lt Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement a1st year
7301	Total Amount for Consumables
7302	Repairs to pumpsets & Water pipe lines(2 years after execution period)
7303	i) Replacement of bearings of pumpsets
7304	ii) Replacement of sleeves
7305	iii) Rewinding of Motors
7306	iv) Raw Water Motors
7307	Clear Water Motors
7308	iv)Replacement of glands of sluice valves
7309	v) Replacements of balls of Air valves
7310	vi) Greease
7311	vii) Gland Packing
7312	Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete to be opetated after DLP.
7313	250 mm HDPE Pipes
7314	200 mm HDPE Pipes
7315	160 mm HDPE Pipes
7316	110 mm HDPE Pipes
7317	LOCAL SCADA at ULB LEVEL
7318	Jr. Service Engineer (Diploma Engineer)Rate as per Labour Rates LAB-00127 of CSSR 2025-26
7319	Data Operator Rate as per Labour Rates LAB-00134 ofCSSR 2025-26
7320	Office assistant, Rate as per Labour Rates LAB-00124 ofCSSR 2025-26
7321	Replacement of necessary servicable materials(Reagents) for Chlorine Analysers*Each Reagent bottle willwork for 90 days (Self life) as per the Caluculation based on the Sampling interval in every 10 Minuet
7322	Replacement of necessary tranducers for PH analysers
7323	Clear Water outlet of Infiltration Gallaries(Re-imbersable on submission of Proof of Payment)
7324	Replacement of necessary tranducers for Turbidity analysers
7325	Clear Water outlet of Water Treatment plant
7326	BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment)
7327	Replacement of necessary tranducers for PH analysers
7328	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)
7329	CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA
7330	PROPORTIONATE SHARE FOR EACH ULB ON PRORATA BASIS
7331	Man Power
7332	Application Engineer (Graduate Engineer)To monitor all issues related to both operation & service
7333	System Engineer (Graduate Engineer)To monitor all meters location through SCADA station and give feedback to the service engineers.
7334	Sr. Service Engineer(Graduate Engineer )To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns
7335	Data OperatorWith assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.
7336	Office assistantTo assist the entire team, dispatches and also maintain SCADA station clean and neat
7337	II) MAINTAINANCE OF LOCAL CONTROL STATION :
7338	BSNL Charges for static IPInterconnection for Data receive station from all Local Contol RTU panels.
7339	Data base management for WEB reportingData storage and reporting system for view through WEB and Mobile networks
7340	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)
7341	PEDANA MUNICIPALITY
7342	Item # 1 : Construction of 9.0m dia. Raw Water Intake Well in SS Tank at Tarakaturu
7343	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
7344	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
7345	Laying of PCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S
7346	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) fro Raft Slab
7347	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
7348	Side Wallof the Well up to ground level
7349	Side Wallof the Well fromground level to 3m height
7350	Side Wallof the Well from3m height to 4m height
7351	Side Wallof the Well from4m height to 5m height
7352	Side Wallof the Well from5m height to 6m height
7353	Side Wallof the Well from6m height to 7m height
7354	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
7355	a) for Pump house Columns (8+3)
7356	Centre Beams
7357	c) for Floor Slab 0.25 m thick including 1.00m walk way
7358	d) for Lintel Beams alround
7359	e) for Roof Beams
7360	f) for Roof slab 0.125m thick 0.45m extension
7361	g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end
7362	Brick masonary in CM (1:6) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.S
7363	Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S for Pump house
7364	Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for the Pump house
7365	Providing impervious course with C.M (1:3)20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903)
7366	Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at sitelabour charges for finishing and curing etc., complete as per S.S for ceiling
7367	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
7368	Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201)
7369	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
7370	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30
7371	Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities
7372	Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities.
7373	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
7374	Supply and delivery of \"Resilient Seated SoftSealing\" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15or GGG-50/SG-500/7 or Equivalent as perIS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without glandpacking with 3-O ring protection system on theShaft and Seals of NBR. The Valves should beVacuum tight and 100% leak proof with face toface dimensions as BS:5163 Type A/IS:14846. Allthe valves should be with fusion bondedElectrostatic Powder coating both inside andoutside (Min 250 Microns)- RAL 5005 withPocket Less Straight through body Passageconforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS- 1538 excluding all taxes, duties Drilled as per IS:1538. PN16 including Transportation
7375	Supply and delivery of 400mm dia. 2.0m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) endsof K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7376	Supply and delivery of SS/C.I/M.S 12.00m. long operating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities.
7377	Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab
7378	Providing electrification including fixures
7379	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
7380	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges
7381	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building
7382	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
7383	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
7384	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
7385	supply andrun of 2 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
7386	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
7387	Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
7388	Supply and fixing of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
7389	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
7390	Supply of 9\" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT
7391	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
7392	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
7393	Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
7394	Labour charges Fixing of 20W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
7395	Item # 2 : Construction ofService Bridge for intake well in SS Tankat Tarakaturu150.00 m long
7396	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
7397	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
7398	Laying of PCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S
7399	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)- For footings
7400	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
7401	a) For columns
7402	b) For Carriage Slab Beams
7403	c) For Carriage Slab 0.20m thick
7404	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
7405	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities
7406	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
7407	Item # 3 : Supply and erection of 2# of 36.00 KW VT Pumpsets each with a duty of 85 LPS and a total head of 32m (Two simaltaneouslyworking and one stand bye)for pumping of Raw water from Intake well to proposed 8.00 MLD WTP
7408	Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 85 LPS against a head of 32 Mts , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller ofreputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST.
7409	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
7410	Item # 4 : Supply, delivery, laying, jointing and testing of 400mm dia DI K9 Pumping mainfromexisting RW Sump at Gudur to Water Treatment Plant at Head Water Works of Pedana
7411	Cutting ofB.T.road surface (as well as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches.
7412	Cutting of existing C.C.road surface for laying sewer lines incl.clearing the site etc.,complete as per the directions of departmental authorities. For pipe line trenches
7413	Earthwork in excavation by mechanical meansin all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7414	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7415	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7416	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7417	Supply and delivery of400 mm Dia of 1 m long Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 400 mm Ø DI D/F Pipe of1.00 m
7418	Supply and delivery of250 mm dia of 2m long Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 250 mm Ø DI D/F Pipe of 2.00 m
7419	Supply and delivery of 250 mm Dia of 1 m long Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 250 mm Ø DI D/F Pipe of 1.00 m
7420	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities. 400mm dia. for Pumping main
7421	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7422	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7423	400 mm dia
7424	250 mm dia
7425	Supply, delivery, ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S
7426	400mm Ø DI D/F valve - PN16
7427	250mm Ø Scour Valves
7428	100mm dia. PN16 gate valves for isolating air valve
7429	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S,100mm dia. PN16
7430	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7431	400mm dia for Sluice
7432	250mm dia for scour
7433	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 100 mm dia
7434	Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mmHBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
7435	Construction of Anchor blockswithconcrete for plainusing 20mm nominal size Graded hard stone aggregate, mechanically mixed, and compacted by vibration including curing complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. M20
7436	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying and grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of binding wire and all labour charge etc., complete as per SS and directed by the departmental authorities
7437	Construction of Masonary Sluice Valve pits suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sas per TD No.4/1941 for finished item of work for 400 mm Dia
7438	Construction of masonary Scour Valve pit suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sas per T.D No.78/1959 for finished item of work. For 250mm dia. Scour Valves
7439	Construction of masonary Air Valve pit suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sas per T.D for finished item of work For 100 mm dia. Air Valves
7440	collection,supply,spreading,compaction,curing with crusher stone dust etc as per specification, For restoration of Pipe line trench
7441	Plain cement concrete (1:4:8) using 40mm graded m/c SS5 HBG metal including machine mixing, centering, laying, vibrating, finishing curing etc for CC pavemants, For road restoration
7442	Laying VCC in M 30Grade design mix using 20mm graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content between 400 to 425 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges (including placing in positionexpansion longitudinal joints and corner reinforcement if any but excluding cost of joint filler, sealant and reinforcementand its fabrication ), forwork, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification forCC Pavement For road restoration
7443	Providing concrete for plain/reinforced concrete in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH Nominal mix M20,, for encasing 600 mm dia MS pipes for road and canal crossings
7444	Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe,, Horizantal boring charges For S.H. crossing for1000 mm dia casing pipe
7445	Provision Foot Bridge for 400 mm Pumping Main crossing the East side canal
7446	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
7447	Mechanical Means
7448	Manual Means
7449	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling
7450	\"Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7451	Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curingwith cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
7452	For Footings
7453	For Columns
7454	For Carriage slab beams
7455	For Carriage slab 0.30m Thick
7456	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD
7457	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tyingetc., complete for finished item of work in all floors.( APSS No.126)
7458	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all materials,conveyance charges of materials and including all operational, incidental and labour charges etc,, complete for finished item of work as directed by the departmental authorities.
7459	Item # 5 : Construction of Offtake Chaber at Ramaraju Canal near Head Water Works of Pedana
7460	Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .
7461	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
7462	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7463	Providing VRCC Cum design mix using 20mm size HBGmetal brought from approved quarry including all cost and conveyance of material and labour charges with machine mixing, curing, vibrating and centeringetc complete, For sluice
7464	Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per ss
7465	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
7466	Supply,delivery and fixing of HYSD barsincluding labour charges for cutting, bending, fabrication and hoisting in position, welding grillsetc complete as per required size as per departamental authorities
7467	ProvidingM 10 Concrete using 20 mm graded and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7468	Supply and delivary and fixing of MS Grills of any design including cost and conveyance of all material and all labour charges such as cutting welding ,gringing etc complete as per ss
7469	Provision for Shutter gate and locking arrangement
7470	Item # 6 : Supply, delivery, laying, jointing and testing of 500mm dia DI K7 Gravity mainfrom Offtake Chamber to Raw Water Sump
7471	Earthwork in excavation by mechanical meansin all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7472	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7473	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-7Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7474	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
7475	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7476	Supply and delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7477	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7478	Supply, delivery, lowering and keeping in position ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc. complete as per S.S
7479	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S,, 100 mm dia. PN 16
7480	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7481	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.100 mm dia. PN 16
7482	Construction of Sluice Valve pit with M30 concrete to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sand as per TD No.4/1941 for finished item of work. ,, 500mm dia
7483	Item # 7: Supply, delivery, laying, jointing and testing of 400 mm DI K9 Pumping Main from Raw Water Sump to WTP
7484	Earthwork in excavation by mechanical meansin all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7485	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7486	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7487	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
7488	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7489	Supply and delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7490	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7491	Supply, delivery, lowering and keeping in position ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc. complete as per S.S, a) For Sluice valve of 400mm dia - PN16
7492	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S,, 100 mm dia. PN 16
7493	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7494	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7495	Construction of Sluice Valve pit with M30 concrete to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sand as per TD No.4/1941 for finished item of work. 400mm dia
7496	Item # 8 : Constuction ofRaw Water Sump of 100 KL capacity atRamaraju Canal in Head Water Works
7497	Earthwork excavation by Mechanical means in all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as pe Technical Specification
7498	Earthwork excavation by Manuallyin all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
7499	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
7500	Laying insitu VCC M-7.5 grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates, OPC cement for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete and as per Technical Specification
7501	Laying insitu VRCC M-30 grade design mixusing 20 mm down size approved, clean, hard, graded aggregates, OPC cement including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing excluding cost of reinforcement etc., complete and as per Technical Specification
7502	FloorSlab
7503	Sidewalls of Sump
7504	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying and as per Technical specification
7505	Painting two coats with Water Proof paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
7506	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
7507	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
7508	Supply and fixing of precast RCC ladder of 0.60 Mt width as directed by Engineer-in-charge for access in to the sump including cost and coveyance and all labour charges and civil work for erection and as per Technical Specification
7509	Item # 9 :Construction of Raw Water cum clear waterPump House(24 m X 7.5 m) at Head Water Works
7510	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings by manual means
7511	70% Machinical means
7512	30% Manual
7513	Providing Sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
7514	Providing PCC (1:4:8)using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7515	Providing PCC (1:3:6)using40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7516	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping, centering,shuttering,laying concrete ,vibrating,curing etcM30 design mix concrete
7517	Column footings
7518	Columns2.10-0.10-0.15-0.25-0.40-0.75=0.40+basement 0.75m+superstructure 3.90m=5.05m
7519	Plinth beam
7520	For brakets
7521	Roof Beams
7522	Roof slab - 150THK
7523	Sunshades 0.60m wide, 0.075m at fixed end and 0.05m at free end
7524	Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 daysetc complete as per S.S
7525	Ground floor
7526	Parapet wall
7527	Cement plasteringusing opc in cm(1:4) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS out side & inside
7528	Ground floor
7529	Parapet wall2(24.00+9.46)=66.82
7530	Cement plasteringusing opc in cm(1:3) prop 12 mmthick including cost of material, labour ,curing etc. complete as per SS for ceiling
7531	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
7532	Cement plasteringusing opc in cm(1:3) prop 20 mmthick including cost of material, labour ,curing etc. complete as per SSfor flooring
7533	Colourwashing two coats Using snowcem over the primery coatconveyance of all labour charges etc., complete as per (in and out side)
7534	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
7535	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
7536	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
7537	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
7538	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
7539	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
7540	Supply delivary and fixing RCC Jollys 50 mm thick includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
7541	Supply ,Erection and Commissioning of Crane Gantry Girder of Capacity of 5.00 T including cost and conveyance of all material and all labour charges etc complete as per ISI and as directed by the dept .
7542	Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brandfor rain water pipes with clamps,Rain water pipes
7543	Providing electrification including fittings
7544	Construction of watchman quarters at Tarakatur
7545	Earthwork excavation by Mechanical means in all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as pe Technical Specification
7546	Earthwork excavation by Manuallyin all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
7547	Filling foundation wells with sand in layers and compacting by watering, ramming as directed including cost of all materials, machinery, labour etc., completeand as per Technical Specification
7548	Laying insitu VCC M-7.5 grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates, OPC cement for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete and as per Technical Specification
7549	Laying ofinsitu VRCC M30 Nominal Mix using 20 mm graded HBG m/c metal and OPC Cement, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing and as per Techncial Specification for flooring and ramp
7550	For1st footing
7551	Columns (BGL)
7552	Plinth beam
7553	Lintle beamsWindows
7554	Roof Beams
7555	Roof slab150 mm
7556	Sunshades
7557	Roft slab
7558	Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of workand as per Technical Specification
7559	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work and as per Technical Specification
7560	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work and as per Technical Specification
7561	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as per the technical specification
7562	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) complete as per the technical specification
7563	Supply delivary and fixing RCC Jalles 50 mm thick includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
7564	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work and as per Technical Specification
7565	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work and as per Technical Specification
7566	Providing High Yield Strength Deformed (HYSD) Thermomechanically treated (TMT) /Steel bars (Fe415 / Fe500 Grade as per IS 1786-1979) of different diameters for RCC works, including labor charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying & lap-Splicing with biding wire 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars including all wastages such as overlaps, couplings, chairs, spacer bars including cost and coveyance binding wire, cover blocks and incidental, operational labor charges such as cutting, bending, placing in position tying as per technical specification.
7567	Laying insitu VCC M-10 grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates, OPC cement for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete and as per Technical Specification
7568	Supply,delivery and fixing of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat as per approved design by the department including cost and coveyance and all labour charges for fixing for finihsed item of work and as per Technical Specification
7569	Painting two coats with synthetic enamel paint of approved quality colour and grade-I over a primary coat to new Steel surfaceincluding cost of primary coat and cost and conveyance of all materials, labourcharges etc.as per SS and directed by the departmental authorities for finished item of work and as per Technical Specification
7570	Supply, delivery and fixing of reputed ISI make 110 mm dia 4 KSCPVC rain water drain pipes including cost and coveyance and labour charges for fixing and as per Technical SpecificationRain water pipes
7571	Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface etc
7572	Lighting arrangements for Pump House including supply and fixing of 20mm dia 1.50mm thick PVC Pipe, Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK), Supply and fixing of 6A 3 pin wall plug socket with 6A switch control, Supply and fixing of batten holder / slanting holder, Supply and Transportation of 1x36/40W box type tube light luminaire with copper / VPIT Choke, condensor, starters etc.,and 1No 36/40W tube and all Labour Charges etc. Complete for finished item of work and as per Technical Specification
7573	Item # 10:Providing Raw Water Pump Sets 2x13 KW at Head Water Works for pumping Raw Water to the Filtration Plant
7574	Supply ,delivery,and erection of 2 Nos ofCentrifugala pumpsets of 22 KW capacity vertical turbine pump sets having discharge of 85 lps againt head of 15mts with combined efficiency of 75%to pump Raw Water from Intake well to 8.0MLD WTP with 100% stand by of standard makeincluding suction, and delivery connections , Panel boards, cables, earthing arrangements, Non return valves, Butter fly valves , Providing thrust blocks,M.S specials and pipesconnection upto puming main, ,all taxes and duties,and all labour charges etc., complete including delivery connections upto pumping main.
7575	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
7576	Item # 11:Construction of 8.0 MLD Rapid Gravity Filtration Plant including Protection Wall,Watchman Quarter ,Approch Road to WTP ,Internal Roads and Drains
7577	Construction of8 MLDcapacity Rapid gravity filtration plant including civil, Mechanical, Electrical,Trial run for 22 hours per day work 25% over loading
7578	Construction of Compound Wall around the proposed Sump at Proposed WTP @ Head water works
7579	Constuction of compound wall with the following specifications1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCCM 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete
7580	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete
7581	Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss
7582	Collection,supply,spreading,compaction and watering etc with gravel as per SS
7583	Construction of CC Road and Drains in Pedana Head Works
7584	Earthwork in excavation Manually for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
7585	Collection and supply of Crusher Dust including spreding with Power roller Including Cost and Conveyance of all amterials to be complete of Road Surface
7586	Laying of PCC (1:4:8) using 40 mm(SS-5) HBG m/c metal coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, laying in position, curing etc. complete for drainbed - 1 cum , For Road
7587	Vibrated cement concrete M30 grade using 20mm & 10mm HBG crushed stone aggregate (Croase aggregate confirming to table 1000-1 and fine aggragate confirming table 1000-2) including cost seigniorage conveyance of all materials to site and labour charges, centering, machine mixing laying vibrating curing etc including all other incidental and operational charges of all T&P etc complete for finished item of work as per MORTH specification 1500, 1700, 2100 & 2720 (4th Revision) and as directed by the Engineer -in- charge for CC pavement , for Road
7588	DRAINS
7589	Earthwork in excavation Manually for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH -1Cum, for 0.45m drain
7590	Providing sand filling as per drawing & technical specifications(for drain bed)1Cum
7591	Laying of PCC (1:4:8) using 40 mmincluding cost & conveyance of all materials, labour charges, machine mixing, vibration, laying in position, curing etc. complete for drainbed - 1 cum
7592	Laying ofVCC (1:3:6) concrete for plain concrete using mateial from 40 mm to 20mm size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specificationfor bed -1Cum
7593	Plastering in CM (1:3) 12 mm thick including cost and conveyance of all materials, labour for mixing material, laying and curing etc., complete - 10 sq.m
7594	Construction of watchman quarters at Head Water Works
7595	Earthwork excavation by Mechanical means in all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as pe Technical Specification
7596	Earthwork excavation by Manuallyin all types of soilsfor structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
7597	Filling foundation wells with sand in layers and compacting by watering, ramming as directed including cost of all materials, machinery, labour etc., completeand as per Technical Specification
7598	Laying insitu VCC M-7.5 grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates, OPC cement for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete and as per Technical Specification
7599	Laying ofinsitu VRCC M30 Nominal Mix using 20 mm graded HBG m/c metal and OPC Cement, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing and as per Techncial Specification for flooring and ramp
7600	For1st footing
7601	Columns (BGL)
7602	Plinth beam
7603	Lintle beamsWindows
7604	Roof Beams
7605	Roof slab150 mm
7606	Sunshades
7607	loft slab
7608	Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of workand as per Technical Specification
7609	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work and as per Technical Specification
7610	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work and as per Technical Specification
7611	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as per the technical specification
7612	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) complete as per the technical specification
7613	Supply delivary and fixing RCC Jalles 50 mm thick includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss
7614	Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/greenglass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work and as per Technical Specification
7615	Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work and as per Technical Specification
7616	Providing High Yield Strength Deformed (HYSD) Thermomechanically treated (TMT) /Steel bars (Fe415 / Fe500 Grade as per IS 1786-1979) of different diameters for RCC works, including labor charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying & lap-Splicing with biding wire 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars including all wastages such as overlaps, couplings, chairs, spacer bars including cost and coveyance binding wire, cover blocks and incidental, operational labor charges such as cutting, bending, placing in position tying as per technical specification.
7617	Laying insitu VCC M-10 grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates, OPC cement for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete and as per Technical Specification
7618	Supply,delivery and fixing of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat as per approved design by the department including cost and coveyance and all labour charges for fixing for finihsed item of work and as per Technical Specification
7619	Painting two coats with synthetic enamel paint of approved quality colour and grade-I over a primary coat to new Steel surfaceincluding cost of primary coat and cost and conveyance of all materials, labourcharges etc.as per SS and directed by the departmental authorities for finished item of work and as per Technical Specification
7620	Supply, delivery and fixing of reputed ISI make 110 mm dia 4 KSCPVC rain water drain pipes including cost and coveyance and labour charges for fixing and as per Technical SpecificationRain water pipes
7621	Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface etc
7622	Lighting arrangements for Pump House including supply and fixing of 20mm dia 1.50mm thick PVC Pipe, Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK), Supply and fixing of 6A 3 pin wall plug socket with 6A switch control, Supply and fixing of batten holder / slanting holder, Supply and Transportation of 1x36/40W box type tube light luminaire with copper / VPIT Choke, condensor, starters etc.,and 1No 36/40W tube and all Labour Charges etc. Complete for finished item of work and as per Technical Specification
7623	Construction of Approch Road from NH to WTP and Retaining Wall for Canal Side Road
7624	Earthwork in excavation Manually for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
7625	Laying of VCC 1:4:8 using 40mm (SS5) nominalHBG machine crushed metalincluding machine crushed metal coarseand fine aggregate confirming to IS 383 including cost & convenaynce of all materials labour charges machine mixing laying in postioncurring for 21 days etc complete for side wall of drains
7626	RCC M- 30 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but includingcentering, shuttering.(for Raft)
7627	RCC M- 30 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but includingcentering, shuttering.(for wall)
7628	Providing 110 MM dia PVC pipe including cost and conveyance of all materials, labnour charges for fixing in position etc., complete as directed by the departmental authorities.
7629	Plastering in CM (1:3) 12mm thick using inculding cost and conveyance of all materials, labour for mixing material laying and curing etc complete
7630	Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete
7631	Providing dowel or anchor bars with 25mm dia Tar steel in 36mm dia hole of 1.5Mts deep including fixing anchor bars in holes with 1:1 cement slurry including all labour cahrges for driling of holes bending of bars and fixing in position as directed by the Departmental authorities excluding cost of anchor bars etc complete
7632	Supply,delivery,spreading,compaction,curing with local meterial using crusher stone dustunit 1.00 cum
7633	Laying of PCC (1:4:8) using 40 mm(SS-5) HBG m/c metal coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, laying in position, curing etc. complete for drainbed - 1 cum
7634	Vibrated cement concrete (1:2:4) using of 20 mm graded HBG metal iwith normal mix including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR - FNDN Vol 3 for Culvert side walls
7635	Item # 12 : Construction wash water recirculation of 7.00 m dia sump(92.43 KL) atWTP Pedana
7636	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth
7637	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depthNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- From 3m depth to 6m
7638	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor foundationsRBR-FNDN-2(1)
7639	Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations
7640	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering, laying concrete ,vibrating, curing etc M30 design mix concrete with concrete mixer
7641	Raft
7642	For side walls circular 0.30m thick below GL
7643	For side walls circular 0.30m thick above GL
7644	Columns 0.30 x 0.30m 3.60-0.30
7645	Roof beams
7646	Roof slab0.15m thick 0.786x(7.10^2-2.70^2)
7647	Roof dome slab 0.15m thick
7648	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thickwith 1kg of water proof compound per bag of cementlaid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
7649	Colourwashing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)
7650	Supply and delivery and fixing in position M S grill of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities
7651	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
7652	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.
7653	Item # 13 : Laying of100 mm dia . DI K9 Pumpingmains from wash water sump at HWW to Areator
7654	Earth work excavation in all soils up to SDR & stone matrix by machinery for Pipe lines as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.00m. For Pipe line trenches.
7655	Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench RBR-FNDN-2(1)
7656	Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with Socket spigot ends confirming toIS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side(K9) including transportation ,loading,unloading, stacking, excluding GST,etc complete
7657	Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewageconforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding GST
7658	Supply, deliveryof D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7659	Lowering of D.I. socket and spigot Pipes of 100 mm Dia and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
7660	Jointing of D.I. Pipes & fittings with Rubber Gasket of 100 mm Dia including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7661	Manufacture, Supply and delivery of 100 mm DiaDI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. PN16
7662	Manufacture, Supply and delivery of 100 mm Dia DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS:1538.Specification and Dimensions as per I.S 5312 or equivalent codes. PN 16
7663	Labour charges for lowering and keeping in position of 100 mm DiaC.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7664	Lowering the C.I. Pipes, D.I. Pipes of 500 mm Dia of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
7665	Lowering the C.I. Pipes, D.I. Pipes of 100 mm Dia of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
7666	Jointing the D.I. Pipes, fittings and valves of 500 mm Dia with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7667	Jointing the D.I. Pipes, fittings and valves of 250 mm Dia with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7668	Jointing the D.I. Pipes, fittings and valves of 100 mm Dia with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7669	Construction of M20 concrete thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
7670	Construction of Sluice Valve chambers with CC M20 mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sandfor finished item of work.
7671	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
7672	Manufacture, Supply and delivery of CI Dismantling Joints with both side flange end suitable for installation in between flange end pipes. These rates are excludingExcise duty, Taxes and transportation charges etc., complete.unit each .
7673	Item # 14 : Supply and erection of 2# of 1.50 KW(2.00HP) CF Pumpsets each with a duty of 7.00 LPS and a total hed of 12m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation
7674	Supply and erection of 2# of 1.50 KW(2.00HP) CF Pumpsets each with a duty of 7.00 LPS and a total hed of 12m ( one working and one stand bye)for pumping wash waterto Areatorm for recirculation
7675	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
7676	CAP Bill No 15 : Supply, delivery, laying, jointing and testing of 400mm dia DI K7 Gravity Main from WTP to Clear Water Sump
7677	Earthwork in excavation by mechanical meansin all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7678	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7679	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-7 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7680	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
7681	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7682	Supply and delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7683	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7684	Supply, delivery, lowering and keeping in position ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc. complete as per S.S
7685	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
7686	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7687	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7688	Construction of Sluice Valve pit with M30 concrete to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sand as per TD No.4/1941 for finished item of work.
7689	Item # 16 :Constuction of Clear Water Sump of 180 KL at WTP in Head Water works
7690	Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0Mts.
7691	70% Machinical means
7692	20% Manual
7693	Collection and supply of Sand for filling from approved quarries including cost, seignorage charges and all labour charges for filling, sectioning, watering and ramming etc.complete as per S.S
7694	Laying of VCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S
7695	Providing VRCC M-30 Grade Design Concrete Mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of I.S - 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate,water etc to site and including seignorage charges all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges including centering,shuttering charges etc.complete for finished item of work.
7696	a) For Base Slabs:
7697	b) For Cylindrical Side Walls:
7698	c) For Columns
7699	d) For Roof Ring Beams
7700	e) For Roof Slab
7701	Roof dome slab 0.15m thick
7702	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete.( APSS No.126)
7703	Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement.The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.
7704	Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S
7705	Supply and fixing of 0.60M x 0.60M D.I. Manhole frame with cover of standard type including cost and conveyance to work spot and all labour charges for fixing etc.complete as per S.S
7706	Supply and erection of D.I Swan neck ventilators with mosquito proof of standard type including cost and conveyance to work spot and all labour charges for erection etc.complete as per S.S
7707	Supply and erection of RCC Finial of standard type including all its accessories and all labour charges for erection etc.complete as per S.S
7708	Providing RCC ladder of 0.45M wide from roof to floor of clear water sump including cost and conveyance of all materials and all labour charges for casting and finishing etc.complete as per S.S
7709	Item # 17 :ProvidingWater Pump Sets 2x10 & 2x26Kwat Head Water Works for pumping Clear Water to Ramalakshmi Weavers Colony, Municipal market and Chenchula colony including 160 KVA Transformer and 160 KVA Generator in Head Works
7710	Supply ,delivery,and erection of 2 Nos ofCentrifugala pumpsets ofvertical turbine pump sets having discharge of 97 lps againt head of 48mts with combined efficiency of 75%to pump Raw Water from Intake well to 6.0MLD WTP with 100% stand by of standard makeincluding suction, and delivery connections , Panel boards, cables, earthing arrangements, Non return valves, Butter fly valves , Providing thrust blocks,M.S specials and pipesconnection upto puming main, ,all taxes and duties,and all labour charges etc., complete including delivery connections upto pumping main.
7711	Supply, delivery and erection ofVFD Control Panels for Pump sets with the following specifications as belowand the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.
7712	Item # 18: Manufacture, Supply and Laying of 350/300/200 MM DI K9 Pumping Main from Head Water Works to various ELSRs
7713	Cutting ofB.T.road surface (as well as asphalt concrete up to 75mm thick) including water bound macadam including all labour charges for cutting, stacking of materials etc.,complete as per the directions of departmental authorities. For pipe line trenches. 10% of length
7714	Cutting of existing C.C.road surface for laying sewer lines incl.clearing the site etc.,complete as per the directions of departmental authorities. For pipe line trenches 10% of length
7715	Earthwork in excavation by mechanical meansin all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7716	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
7717	Crusher Dust Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTHfor pipe line trench
7718	Supply and delivery of D.I. Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-9 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing)with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.
7719	b) 350mm dia.pumping MainDI K9
7720	f) 250 mm dia.pumping MainDI K9
7721	f) 200 mm dia.pumping MainDI K9
7722	Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.
7723	b) 350mm dia.pumping MainDI K9
7724	f) 250 mm dia.pumping MainDI K9
7725	f) 200 mm dia.pumping MainDI K9
7726	Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.
7727	b) 350mm dia.pumping MainDI K9
7728	f) 250 mm dia.pumping MainDI K9
7729	f) 200 mm dia.pumping MainDI K9
7730	Supply and delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate including VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.
7731	Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.
7732	350 mm DF pipes 1.00 m long
7733	250 mm DF pipes 1.00 m long
7734	200 mm DF pipes 1.00 m long
7735	Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85
7736	300 mm s/v Joints
7737	250 mm s/v joints
7738	200 mm s/v Joints
7739	Supply, delivery, lowering and keeping in position ofDI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4.All the valves should be with Electrostatic powder coating both inside and outsidepocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc. complete as per S.S
7740	a) For Sluice valve of 350mm dia - PN 2.5
7741	b) For Sluice valve of 250mm dia - PN 2.5
7742	d) For Sluice valve of 200mm dia - PN 2.5
7743	For Scour valve of 100mm dia- PN 2.5
7744	Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S
7745	Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves.
7746	350mm dia
7747	250mm dia
7748	200mm dia
7749	100 mm dia
7750	Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
7751	Barricading ,hoarding,lighting and watching etc for water supply and sewerage works for trenches upto 6 feet-( 2m) below GL
7752	Construction of R.C.C. M20 Grade thrust blocks using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete.
7753	Supply and delivery of Crusher dust from approved quarries incl.cost,seignorage and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.Retc., complete as per S.S.
7754	Plain Cemment Concrete (1:4:8)using 40mm size HBG crushed metal from approved quarry including cost and conveyance of all materials and all labour charges including mechanical mixing of concrete, tampimg and curing etc.complete as per S.S
7755	Vibrated cement concrete M 30 using graded HBG metal including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR - FNDN Vol 3 BLD CSTN -2-11
7756	Construction of Sluice Valve pit with M30 concrete to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.Sand as per TD No.4/1941 for finished item of work.
7757	350mm dia
7758	250mm dia
7759	200mm dia
7760	Construction of Scour Valve pit with M30 concrete suitable to the Scour Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.Sas per TD No.4/1941 for finished item of work as per TD No. 78/1959 , 100 mm Dia
7761	Construction of Air Valve pit with M30 concretesuitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work as per T.D Drawing.
7762	Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying and grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of binding wire and all labour charge etc., complete as per SS and directed by the departmental authorities
7763	Road crossings / Canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydralic pipe jacking technique complete including tunneling excavation drive and receive pits ,excavation and all machines tranaportation charges and other required materials but excluding cost of encasing pipe of 800 mm
7764	Item # 19 :Construction of 1000 KL ELSR at Municipal Market in Zone-1Municipal Market
7765	Construction of ELSR with Raft Foundation for a finished work including 2 coats of snowcem painting for external surfaces, three coats of epoxy paint to inner surface of the reservoir including roof dome. lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes,bends and valves as per departmental designs and drawingswith the following details
7766	Item # 20 :Construction of 500 KL ELSR at Public Health Center in Zone-2
7767	Construction of ELSR with Raft Foundation for a finished work including 2 coats of snowcem painting for external surfaces, three coats of epoxy paint to inner surface of the reservoir including roof dome. lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes,bends and valves as per departmental designs and drawingswith the following details
7768	Item # 21 : Supply,delivery, errection and commissioning of 160 KVA capacityTransformer including Dedicated Feeder main and all necessary works atTarakatur
7769	Supply, transportation and delivery at site of 3 Phase, 50 Hz, oil mmersed and naturally cooled, outdoor / Indoor type copper wound 160KVA transformer designed and manufactured as per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 1100V / (433V / 415V) with HV tapping + or-2.5% contineously ratedfor full load and temporature rise not exceeding 50°C in oil and 55°C rise by th resistance of the winding after contineous run on full load rating complete with the following standard mountings.Building SSR, sl no.1356 ,page no.261
7770	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
7771	Supply of 11 KV 300A Gang operated Air break disconnecting switch complete with tandom bar, operating pipe, handle with badlock arrangements, 11 KV insulators etc
7772	Supply and erection of 11 KV Horn gap fuse units complete with insulators, arcing horn etc.,
7773	Supply and erection of 9 KV 5 KA auto valve distribution class lighting arresters suitable for use on 3 Ph. 11 KV 50 Hz system.
7774	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
7775	Supply and erection of 11 KV Pin Inuslators complete with GI pins and top clamps
7776	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
7777	Providing stay sets for thestructures complete with stay wire 11 KV guy insulators. Stay rod bow, thimble etx.,
7778	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
7779	A) Earth Electrodes
7780	B) 25 x 3 mm HDB copper flat
7781	C) Epoxy insulators
7782	D) No.\"8\" SWG Copper wire.
7783	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
7784	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
7785	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
7786	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7787	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
7788	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
7789	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
7790	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
7791	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
7792	g).3RYB Phase indication lamps with leds
7793	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
7794	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7795	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7796	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7797	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7798	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7799	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
7800	.KWH digital meter fro lighting section
7801	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
7802	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
7803	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
7804	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
7805	Supply and Laying of 3C X50Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b
7806	Construtionof tranformer yard , yard lighting , D.P structures with Conductor,Kiosk,resisters,Fuse Carries , metalling and all necessary civil works
7807	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
7808	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
7809	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7810	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM30 design mix concrete
7811	column footings
7812	Columns1.20-0.10-0.10-0.30+1.80
7813	Plinth beam2(15+12)=54-gate3.00=51.00
7814	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
7815	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
7816	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
7817	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
7818	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
7819	supply and filling the transformer yard with 40mm HBG metal m/c
7820	Cost of 11 KV Line with 55 sq.mm. AAA conductor 9.1 m PSCC Poles at 60 m span, 75 Kg/sq.m wind pressure, working load 140 Kg
7821	Raw water intake well in Tarakaturu
7822	Cost of erection of 11 KV Bay Extension in existing 33/11 KV sub-station
7823	Raw water intake well in Tarakaturu
7824	Cost of erection of 11 KV HT Cable Panel
7825	Raw water intake well in Tarakaturu
7826	Item #22 : Supply, delivery, errection and commissioning of 315 KVA capacity Transformer including all necessary works with Dedicated Feeder Mains at Ramaraju Canal and WTP
7827	Supply, transportation and delivery at site of 3 Phase, 50 Hz, oil mmersed and naturally cooled, outdoor / Indoor type copper wound 160 KVA transformer designed and manufactured as per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 1100V / (433V / 415V) with HV tapping + or-2.5% contineously ratedfor full load and temporature rise not exceeding 50°C in oil and 55°C rise by th resistance of the winding after contineous run on full load rating complete with the following standard mountings.Building SSR, sl no.1356 ,page no.261
7828	Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply
7829	Supply of 11 KV 300A Gang operated Air break disconnecting switch complete with tandom bar, operating pipe, handle with badlock arrangements, 11 KV insulators etc
7830	Supply and erection of 11 KV Horn gap fuse units complete with insulators, arcing horn etc.,
7831	Supply and erection of 9 KV 5 KA auto valve distribution class lighting arresters suitable for use on 3 Ph. 11 KV 50 Hz system.
7832	Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps
7833	Supply and erection of 11 KV Pin Inuslators complete with GI pins and top clamps
7834	Providing jumper connections with I/O\" SWG HDBC wire between the 11 KV equipment on the outdoor structures
7835	Providing stay sets for thestructures complete with stay wire 11 KV guy insulators. Stay rod bow, thimble etx.,
7836	Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:
7837	A) Earth Electrodes
7838	B) 25 x 3 mm HDB copper flat
7839	C) Epoxy insulators
7840	D) No.\"8\" SWG Copper wire.
7841	Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431
7842	Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976
7843	Supply and fixing of Electrolytic grade copper bus barbus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978
7844	a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7845	b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
7846	c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980
7847	d) Supply and fixing of selector switch for voltmeter (4position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03989
7848	e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983
7849	f).Supply and fixing of CT linked selector switch of 10A for Ampere meter (4 position) including making connection etc. as required Make: L&T /C&S/SALZER/HPL MAT 03990
7850	g).3RYB Phase indication lamps with leds
7851	h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986
7852	630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7853	630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7854	630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7855	630A TPN SDFU for SpaceMakes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7856	630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885
7857	630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898
7858	.KWH digital meter fro lighting section
7859	Supply of32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879
7860	Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938
7861	Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998
7862	1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.
7863	Supply and Laying of 3C X50Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b
7864	Construtionof tranformer yard , yard lighting , D.P structures with Conductor,Kiosk,resisters,Fuse Carries , metalling and all necessary civil works
7865	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHNote : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means
7866	Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss
7867	Providing PCC 1:4:8using 40 mm graded SS 5HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materialsand labour charges, machine mixing , vibration,laying in position, curing etc., complete
7868	Supply and placing of the design mix concretecorresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such asweigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etcM30 design mix concrete
7869	column footings
7870	Columns1.20-0.10-0.10-0.30+1.80
7871	Plinth beam2(15+12)=54-gate3.00=51.00
7872	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3
7873	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
7874	Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
7875	Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete
7876	Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss
7877	supply and filling the transformer yard with 40mm HBG metal m/c
7878	Cost of 11 KV Line with 55 sq.mm. AAA conductor 9.1 m PSCC Poles at 60 m span, 75 Kg/sq.m wind pressure, working load 140 Kg
7879	Raw water Sump well @ Ramaraju Canal
7880	Cost of erection of 11 KV Bay Extension in existing 33/11 KV sub-station
7881	Raw water Sump well in Gudur
7882	Cost of erection of 11 KV Vacum breaker in sub-station
7883	Raw water Sump well@ Ramaraju Canal
7884	Item #23 : SCADA ROOM at HWW
7885	Earthwork in excavation Manually for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.
7886	Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).
7887	Laying Cement concrete (1:4:8)using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).
7888	Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.
7889	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.
7890	Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.
7891	Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
7892	M25 Grade Footings
7893	M25 Grade Pedastals around Columns
7894	M25 Grade Columns Up to plinth
7895	M25 Grade Plinth Beams 300 x 400
7896	M25 Grade Columns
7897	M25 Grade Up to Ground Floor Roof Level
7898	M25 Grade Up to First Floor Roof Level
7899	M25 Grade Beams 230 x 500
7900	M25 Grade For Ground Floor
7901	M25 Grade For First Floor
7902	Lintels
7903	M25 Grade For Ground Floor
7904	M25 Grade For First Floor
7905	M25 Grade Sunshades
7906	M25 Grade For Ground Floor
7907	M25 Grade For First Floor
7908	M25 Grade Staircase slab 0.15 m thick
7909	M25 Grade Ground Floor to First Floor
7910	M25 Grade First Floor to Second Floor
7911	M25 Grade RCC Slab 150mm thick
7912	M25 Grade For Ground Floor
7913	M25 Grade For First Floor
7914	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts- RBR-FNDN-8 & Revised Data sl.No-5
7915	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)Ground Floor
7916	Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)Ground FloorFF
7917	Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1).
7918	For Ground Floor Level
7919	For First Floor Level
7920	11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.
7921	Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
7922	Out Side
7923	Ground Floor
7924	For First Floor
7925	Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
7926	Inside Walls
7927	Ground Floor
7928	First Floor
7929	Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc.,complete for finished item of work.
7930	Celing
7931	SCADA Room Ground Floor
7932	SCADA Room First Floor
7933	Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges,labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
7934	Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials., for Toilets
7935	Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing inposition ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.
7936	Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)
7937	Out Side walls
7938	Inside Walls
7939	Ceiling
7940	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
7941	Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.
7942	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).
7943	Ventilators: Top Hung 2 \"-0\" x 2\"-0\" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
7944	Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mmthick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work
7945	Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary workall labour chages
7946	Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages
7947	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building
7948	Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges
7949	supply andrun of 2 of36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mainsincluding all labour charges
7950	supply andrun of 1 of14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.
7951	supply andrun of 4 of6 sq.mm (7/18)WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,
7952	Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete
7953	Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3
7954	Supply of 48\" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride
7955	Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega
7956	Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
7957	Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connectionswith twin core wire etc., complete
7958	Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with/ TW round blocks with all accessories including giving connections and all labour charges etc., complete.
7959	Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White
7960	Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k
7961	Providing & Placing on Terrace (at all floor levels) of 2000 litres polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
7962	Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work
7963	Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
7964	Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
7965	Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
7966	Supplying and fixing of25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
7967	Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors
7968	Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.
7969	Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
7970	Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand
7971	Labour charges for laying, fixing and commissioning 100 mm Dia PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
7972	Constructing 457.2 mm x 457.2 mm (1\"6\"x1\"6\") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3\"0\") and fitted with light weight 457.2 mm x 457.2 mm (1\"6\"x1\"6\") C.I frame and cover of 20 Kg
7973	S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
7974	25 mm dia nominal bore -from tank to jn forof individual lines and inlet
7975	20 mm dia nominal bore -fromjn forof individual lines to toilets
7976	15 mm dia nominal bore -for internal
7977	S&F of GI & GM fittings
7978	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
7979	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
7980	GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size
7981	S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent
7982	S& F GI union Ist Quality
7983	12.70mm
7984	19.05mm
7985	25.40mm
7986	Item # 24 : Providing for Implementation of Environmental Management Plan in the estimate for Pedana Municipality.
7987	I. Monitoring Costs : Construction Phase(Two years)
7988	Air Quality Monitoring ( 5 Monitoring station)once in a month for three seasons duringthe construction periodat Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
7989	Noise level Monitoring ( 5 Monitoring station)once in a month for three seasons duringthe construction periodat Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
7990	Water Quality Monitoring surface / ground(6 Monitoring station)once in a month for three seasons duringthe construction periodat Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
7991	II. Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) with Tree Guards as per the Technical Specification
7992	II. Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) with Tree Guards as per the Technical Specification
7993	II. Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) with Tree Guards as per the Technical Specification
7994	II. Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) with Tree Guards as per the Technical Specification
7995	II. Compensatory plantation andthree years maintenance (Compensatory afforestation ratio is 1:5) with Tree Guards as per the Technical Specification
7996	III. Sprinkling of waterwith 5000 Litres capacity tankers once in a day for 600 days (excluding rainy days)
7997	Bill No: 37 Hiring for 1 No Vehicles for 24 Months during execution period.
7998	Hiring for 1 Nos. Vehicles for 2x24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
7999	Distribution Network
8000	Item # 26 : Providing of Distribution system for Zone - I to VI including Road Restoration.
8001	Cutting open cement concrete road surface including depositing of excavated materials for Pipe line trench work including labour charges and all incidental and operational charges etc., complete..
8002	Cutting open BT road surface (as well as asphalt concrete upto 75mm thick)including water bound macadam and stocking of excavated materials for pipeline trench work.
8003	Barricading, hoarding, lighting and diversion of traffic, providing caution boards and watching for water supply and sewerage works including all labour charges, incidental and operational charges etc., complete.
8004	Earthwork excavation by machinery and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars for pipeline trenchesand as per specification,drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches including all incidental and operational charges etc., complete.
8005	Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer includingall incidental and operational charges etc., completefor the pipe line trench (RBR-FNDN-1)
8006	Bailing out water from the pipe line trenches with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper etc complete.
8007	Manufacturing, Supply and Delivery of HDPE Pipes of pressure 6Kgs/ Sqcm and 100 grade confirming to IS: 4984 - 1995 including transporation to any where in AP.excise duty, sales tax and excluding specials etc complete as per standard specifications
8008	315mm dia HDPE PE-100 grpipe
8009	250mm dia HDPE PE-100 grpipe
8010	200mm diaHDPE PE-100 grpipe
8011	160mm diaHDPE PE-100 grpipe
8012	110mm dia HDPE PE-100gr Pipe
8013	Laying and jointing ofHDPE pipes by butt fusion welding as per IS 7634 - part - II / 1975 as amended from from time to time to the aligment and gradient and testing the pipe line to the required pressure.
8014	315mm dia HDPE PE-100 grpipe
8015	250mm dia HDPE PE-100 grpipe
8016	200mm diaHDPE PE-100 grpipe
8017	160mm diaHDPE PE-100 grpipe
8018	110mm dia HDPE PE-100gr Pipe
8019	Manifacture, supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.
8020	Tee\"s
8021	315mm dia HDPE PE-100 grpipe
8022	250mm dia HDPE PE-100 grpipe
8023	200mm diaHDPE PE-100 grpipe
8024	160mm diaHDPE PE-100 grpipe
8025	110mm dia HDPE PE-100gr Pipe
8026	Reducers
8027	315mm x 280mm
8028	280mm x 250mm
8029	250mm x 225mm
8030	225mm x 200mm
8031	200 mm x180 mm
8032	180 mm x160 mm
8033	160 mm x140 mm
8034	140 mm x 125 mm
8035	125 mm x110 mm
8036	Bends
8037	315mm dia HDPE PE-100 grpipe
8038	250mm dia HDPE PE-100 grpipe
8039	200mm diaHDPE PE-100 grpipe
8040	160mm diaHDPE PE-100 grpipe
8041	110mm dia HDPE PE-100gr Pipe
8042	Pipe end long neck
8043	315mm dia HDPE PE-100 grpipe
8044	250mm dia HDPE PE-100 grpipe
8045	200mm diaHDPE PE-100 grpipe
8046	160mm diaHDPE PE-100 grpipe
8047	110mm dia HDPE PE-100gr Pipe
8048	End caps
8049	110mm dia
8050	Supply and filling with Sand from approved quarry including cost and conveyance, watering, tamping including all labour chargesetc complete for finished item of work
8051	Supply, delivery of Resilient seated soft sealing gate valves (Sluice valves) (soft Seated) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions,wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4 andwith Electrostatic powder coating both inside and outsidepocket less body passage and drilled as per IS:1538.
8052	250mm diavalve
8053	200mm dia sluice valve
8054	150mm diasluice valve
8055	100mm diasluice valve
8056	100mm dia sluice valve for scour
8057	Manufacture, supply and delivery of 100 mm Dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG40/SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of austenitic alloy steel, Dn50 Floatand Gaskets and seals of EPDM.Epoxy powder coating (EP-P) inside and outside colour blue .Drilled as per IS:1538.including all taxes & duties
8058	Labour charges for lowering and keeping in position of D.I sluice valves, reflux valves and scour valves
8059	250mm diavalve
8060	200mm dia sluice valve
8061	150mm diasluice valve
8062	100mm diasluice valve
8063	100mm dia sluice valve for scour
8064	Labour Charges for fixing of 100 mm DiaKinetic Air Valves with isolating Sluice Valves, Double Air Valves/ Air Cushion Valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc complete
8065	Construction ofRCCvalve chamber in M20 Grade as per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its fabrication charges.
8066	250mm diavalve
8067	200mm dia sluice valve
8068	150mm diasluice valve
8069	100mm diasluice valve
8070	100mm dia sluice valve for scour
8071	100mm dia Air valves
8072	Carting Surplus Excavated earth with a lead of 5.0 Km from work site beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc.
8073	Collection ,Supplyand filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work sitefor pre measurementsincluding cost and convenyance of all material and all labour charges etc. complete
8074	Plain cement concrete (1:4:8) using 40mm graded m/c SS5 HBG metal including machine mixing, centering, laying, vibrating, finishing curing etc for CC pavemants
8075	Laying VCC in M 30Grade design mix using 20mm graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content between 350 to 425 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery,all labour charges (including placing in positionexpansion longitudinal joints and corner reinforcement if any but excluding cost of joint filler, sealant and reinforcementand its fabrication ), forwork, vibration, curing for 21 days and all incidental & operational chargesetc. complete conforming to standard specification forCC Pavement
8076	Item # 27 : Providing 15mm dia 4690 Nos New House service connections and transfer of Existing house 4010 Nos Service connections totalling 13357Nos. HSCs.
8077	PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
8078	PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITESIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe)
8079	Item # 28 :Providing Technical Diploma Engineer for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge.
8080	Item # 30 :Supply distrubution and fixing, installation of Flowmeters, Motorised Valves, Level Indicators including Supervisory Control and Data Acuasation System (SCADA) for controlling and monitoring of the bulk water supply pipelines for SS TankIntake Well,WTP (8 MLD)
8081	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications ofWater Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
8082	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8083	Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facilitycomplete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties
8084	Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE.Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer
8085	DN 250 - PN 16 pump control valve for Raw Water Pumping Station-1 as per the above specification
8086	DN 200 - PN 16 pump control valve for Raw Water Pumping Station-2 as per the above specification
8087	DN 100 - PN 16 pump control valve for Clear Water Pumping Station-1 as per the above specification
8088	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8089	outlet of Clear Water Pumping Station-1
8090	outlet of Clear Water Pumping Station-2
8091	Outlet of Raw Water Pumping Station-2 at Ramarajupalem canal
8092	Outlet of Raw Water Pumping Station-1 at Tarakatar SS tank
8093	Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
8094	Supply and testing of wall mounted120(w),140(H),77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
8095	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS,Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
8096	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
8097	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8098	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow & Pressure and QualityParameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
8099	Supply, errection, Testing & Commissioning of In door type Scadabased RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB\"s, Relay cards, fixing of all termination with FTB\"s, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables,and the panel having logic for the following anderection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.
8100	supply and delivery of \"Resilient Seated Soft Sealing\" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.
8101	150MM Dia Above Specification.
8102	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8103	Inlet of 600 KL Existing ELSR at Chenchu colony
8104	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8105	200 MM Dia Above Specification.
8106	Inlet of 1000 KL Proposed ELSR at Municipal market
8107	Supply and deliveryof separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8108	150MM Dia Above Specification.
8109	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8110	Inlet of 600 KL Existing ELSR at Chenchu colony
8111	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8112	200 MM Dia Above Specification.
8113	Inlet of 1000 KL Proposed ELSR at Municipal market
8114	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
8115	150MM Dia Above Specification.
8116	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8117	Inlet of 600 KL Existing ELSR at Chenchu colony
8118	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8119	200 MM Dia Above Specification.
8120	Inlet of 1000 KL Proposed ELSR at Municipal market
8121	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8122	150MM Dia Above Specification.
8123	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8124	Inlet of 600 KL Existing ELSR at Chenchu colony
8125	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8126	200 MM Dia Above Specification.
8127	Inlet of 1000 KL Proposed ELSR at Municipal market
8128	Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensorsmake of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth,protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8129	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8130	Inlet of 600 KL Existing ELSR at Chenchu colony
8131	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8132	Inlet of 1000 KL Proposed ELSR at Municipal market
8133	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
8134	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8135	Inlet of 600 KL Existing ELSR at Chenchu colony
8136	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8137	Inlet of 1000 KL Proposed ELSR at Municipal market
8138	Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7),Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.
8139	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8140	Inlet of 600 KL Existing ELSR at Chenchu colony
8141	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8142	Inlet of 1000 KL Proposed ELSR at Municipal market
8143	Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8144	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8145	Inlet of 600 KL Existing ELSR at Chenchu colony
8146	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8147	Inlet of 1000 KL Proposed ELSR at Municipal market
8148	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
8149	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8150	Inlet of 600 KL Existing ELSR at Chenchu colony
8151	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8152	Inlet of 1000 KL Proposed ELSR at Municipal market
8153	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8154	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8155	Inlet of 600 KL Existing ELSR at Chenchu colony
8156	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8157	Inlet of 1000 KL Proposed ELSR at Municipal market
8158	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8159	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8160	Inlet of 600 KL Existing ELSR at Chenchu colony
8161	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8162	Inlet of 1000 KL Proposed ELSR at Municipal market
8163	Erection, testing and commissioning of Reservoir Management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8164	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8165	Inlet of 600 KL Existing ELSR at Chenchu colony
8166	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8167	Inlet of 1000 KL Proposed ELSR at Municipal market
8168	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8169	Inlet of 600 KL Existing ELSR at Rajyalakshmi
8170	Inlet of 600 KL Existing ELSR at Chenchu colony
8171	Inlet of 500 KL Proposed ELSR at PHC (Government Hospital)
8172	Inlet of 1000 KL Proposed ELSR at Municipal market
8173	24 x 7 Water Supply ::DMA Management ::
8174	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8175	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8176	Supply and deliveryof Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8177	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8178	Supply and delivery ofElectrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit tofunctions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SSincluding cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
8179	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8180	Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8181	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8182	Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA/ Diaphragm: SS316L / Process Connection: 1/2 \"NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and dutiesand as per SS and as directed by the department officer
8183	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8184	Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe Control &Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valveswith specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panelis suitable forthe above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.
8185	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8186	Supply laying and jointing of 4 Sq.MM - 2 corePVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR\"s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8187	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8188	Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cablemake of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automationat Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and everypanel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8189	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8190	Erection, testing and commissioning of DMA management unit including dejointing of existing pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece,lifting the said pipe, cleaning & returning to the departmental storeas per direction of the Engineer-in-charge andlowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,)charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8191	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8192	Providing, Installing and satisfactory field testing of Self Powered Presuure Monitoring Sensor with the specifications of DN 10, PN 0 to PN 16 range, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, protection class of IP-68, 3.6 V.. DC, Lithium Battery, Life of 3 Yeras basis on six transmissions per day.The meter can fetch the pressure datain minimum 1 Minute interval (User selectable) and store the data up to 300 Logs with time stamp on FIFO basis with in the Meter and transmit data through JSON format to the data server via NB IoT/LoRa/LoRawan communication and the data management system can able to process the Pressure data to display as per the time stamp and generate the trends as per the user defined vaiables and fixing with suitable manifold including stop cocks etc., complete charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8193	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8194	Under 1000 KL ELSR at Municipal market Zone-2
8195	Integration ofPLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.
8196	Inlet of DMA-1&2 under 500 KL ELSR at PHC-Govt hospital zone-2
8197	AMI Water Meter Management.
8198	Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8199	Supply, Delivery, Installing and satisfactory field testing of AMR Unit for domestic Water Meters from 15 mm to 40 mm with the specifications of fully body made up of composite material, magnetically coupled in between meter and AMR module, protection class of IP-68, In built battery with 3.60 V... Lithium Battery for life of 10 Years based on one communication /Day, Communication interface in between meter and AMR unit with Pulse/ Photo Electric, AMR unit can fetch the data from meter on hourly basis and store the data for 48 Hours on FIFO basis and send the data through NB IoTin every 24 Hours without fail through the provider registered inDOT, India, if the communication fails due to bad communication the AMR module can try for a maximum six times in different time intervals to ensure the data to reach to server. The AMR unit have option of Bluetooth for remote configurations at field. In the special event and field testing the data sending interval of AMR unit can be configurable and minimum time interval span is one Hour (The battery life can be calculated based on the time intervals of data communication)The data storage should be kept in Indian data centres for the data security, AMR unit can be registered the abnormalities like Reverse flow, Leak detection, Tampering and send to the server via reading data packet, Every communication from the AMR module to server should be in JSON format with real time stamping, The AMR can suitable for all the Mechanical Water meters supplied by the agency in this contract. The AMR Module offered with 5 years warrantiesand submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.
8200	Under DMA-1 ,2 under 500 KL ELSR at PHC-Govt hospital zone-2 with above specifications
8201	Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.
8202	Establishment of HARDWARE for Individual Local Control Station at Individual ULB ::
8203	Supply,erection, testing, commissioning of Hard ware for the SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter managementwhere the instrumantation and automation developed under this project and synchornization by deploying the followingcomponents including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
8204	Development of Softwares for Individual Local Control Station at Individual ULB ::
8205	Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control stationwhere the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMAand AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks,etc., complete and as directed by the department officer.
8206	Item # 30 :Manning, Operation and Maintenance of Pedana Municipality Water SupplySource Improvement Scheme For 7 Years
8207	Personal required for operating Intake/Offtake well/Pump houses
8208	Operator
8209	Fitter/Helper
8210	Watch man
8211	Personal required at operating Raw water rising mains
8212	Fitter/Helper
8213	Personal required at operating Water treatment plants & Sump
8214	Operator
8215	Fitter/Helper
8216	Lab Technician
8217	Electrician /Mechanic
8218	Watch man
8219	Personal required at operating Clear water rising mains
8220	Fitter/Helper
8221	Personal required at operating distribution system
8222	Fitter/Helper
8223	Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines.
8224	Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement at 15 mg/lit
8225	Repairs to pumpsets & Water pipe lines(2 years after execution period)
8226	iv)Replacement of glands of sluice valves
8227	v) Replacements of balls of Air valves
8228	vi) Greease
8229	vii) Gland Packing
8230	Leakages in HDPE Pipes
8231	250 mm HDPE Pipes
8232	200 mm HDPE Pipes
8233	160 mm HDPE Pipes
8234	110 mm HDPE Pipes
8235	LOCAL SCADA at ULB LEVEL
8236	Jr. Service Engineer (Diploma Engineer)Rate as per Labour Rates LAB-00127 of CSSR 2025-26
8237	Data Operator Rate as per Labour Rates LAB-00134 ofCSSR 2025-26
8238	Office assistant, Rate as per Labour Rates LAB-00124 ofCSSR 2025-26
8239	Replacement of necessary servicable materials(Reagents) for Chlorine Analysers
8240	Replacement of necessary tranducers for PH analysers
8241	Clear Water outlet of Water Treatment plant(Re-imbersable on submission of Proof of Payment)
8242	Replacement of necessary tranducers for Turbidity analysers
8243	Clear Water outlet of Water Treatment plant
8244	BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment)
8245	GPRS Connections,WTP Quality Management,ELSR Amangement, DMA Management
8246	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)
8247	CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA
8248	Application Engineer (Graduate Engineer)To monitor all issues related to both operation & service
8249	System Engineer (Graduate Engineer)To monitor all meters location through SCADA station and give feedback to the service engineers.
8250	Sr. Service Engineer(Graduate Engineer )To attend the service calls by the feedback from SCADA Engineerand supervise to overcome major/minor shutdowns
8251	Data OperatorWith assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.
8252	Office assistantTo assist the entire team, dispatches and also maintain SCADA station clean and neat
8253	II) MAINTAINANCE OF LOCAL CONTROL STATION :
8254	BSNL Charges for static IPInterconnection for Data receive station from all Local Contol RTU panels.
8255	Data base management for WEB reportingData storage and reporting system for view through WEB and Mobile networks
8256	Charges for maintainance of PC\"s,Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS,maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)
8257	End of BOQ

Also Visit

Tenders

Andhra Pradesh Tenders

Construction Tenders

Water Storage and Supply Tenders

Water Supply Project Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Asian Infrastructure Investment Bank (Aiib) - Andhra Pradesh Urban Water Supply And Septage Management Improvement Project (Apuws And Smip), Guntur-Andhra Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Asian Infrastructure Investment Bank (Aiib) - Andhra Pradesh Urban Water Supply And Septage Management Improvement Project (Apuws And Smip), Guntur-Andhra Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us