|
| 1 | Demolition of stone/ boluder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-charge. |
| 2 | Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down cement plaster of any descriptionon brick or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1:4, complete all as specified and directed by Engr-in-charge. |
| 5 | All as per item No. 4 above but except stone, complete all as specified and directed by Engr-in-charge. |
| 6 | M&L for precast PCC 1:3:6 type C1 (20mm graded agg) as in bond stones set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 7 | M&L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded stone aggregate, any width and setting in cement mortar 1 : 6, complete all as specified and directed by Engr-in-charge. |
| 8 | M&L for15 mm thick rendering in CM 1:4 on fair faces of brick work/ PCC block wallor concrete surface finishedfair and even without using extra cement, complete all as specified and directed by Engr-in-charge. |
| 9 | Dismantling of cast iron or reinforced concrete pipe/ PVC pipe jointed in cement mortar of size 100mm dia, complete all as specified and directed by Engr-in-charge. |
| 10 | S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 11 | S&F PVC (SWR) bends any radius 110mm complete all as specified and directed by Engr-in-charge. |
| 12 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. |
| 13 | M&L for Reinforced precast cement concrete type B-1 1:2:4 ( using 20 mm graded stone aggragate)as in cover slabs etc set in cement mortar (1:4) incl necessary formwork complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips, complete all as specified and directed by Engr-in-charge. |
| 15 | Demolition of Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-charge. |
| 16 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge. |
| 17 | M&L for PCC 1:2:4B1, 20mm graded stone aggregate as in surface channels and drains, complete all as specified and directed by Engr-in-charge. |
| 18 | Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc., complete all as specified and directed by Engr-in-charge. |
| 19 | M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles, throating and necessary form work complete all as specified and directed by Engr-in-charge. |
| 20 | M&L PCC 1:3:6 type C2 (40mm graded aggregate ) as in fdn filling andmass concrete for encasing of fencing posts complete all as specified and directed by Engr-in-charge. |
| 21 | Raking out cement mortar joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc., complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for cement mortar (1:4) raised pointingto random or polygonal rubble, uncoursed or brought upto courses, complete all as specified and directed by Engr-in-charge. |
| 23 | S&F Machine made precast cement concrete blocks (interlocking paver) of 60mm thick with grey cement and pigment over 25mm thick sand cushion including watering and consolidation. The interlocking joints shall be filled with fine sand, complete all as specified and directed by Engr-in-charge.(Note: Sand filling shall be paid separately as material only) |
| 24 | Material only for sand filling under floors or in foundations, complete all as specified and directed by Engr-in-charge. |
| 25 | M & L for 75mm thick PCC(1:4:8) Type-D2 using 40mm graded aggregate as in sub base, complete all as specified and directed by Engr-in-charge. |
| 26 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. |
| 27 | M & L chequered cement concrete tile 25cm x 25cm /20cm x 20 cm x 22 to25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed by Engr-in-charge. |
| 28 | M&L for 20 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of graniteincl all moulding etc complete all as specified and directed by Engr-in-charge. |
| 29 | Dismantling fencing wire mesh any type, complete all as specified and directed by Engr-in-charge. |
| 30 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire, complete all as specified and directed by Engr-in-charge. |
| 31 | Supply only chain link MS galvanised fencing any size or any type, complete all as specified and directed by Engr-in-charge. |
| 32 | Dismantling posts or struts (Steel or RCC) any section, including taking out embedded portion in concrete, brick work or masonry and making good disturbed surfaces, complete all as specified and directed by Engr-in-charge. |
| 33 | S&F steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-charge. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engr-in-charge. |
| 35 | S&F mild steel Framed work ornamental and intricate design such as grills, gratings, etc with ends of bars shouldered or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balluster; walk ways; railings; framework of water tanks and simillar worksconforming to Fe290 gde-E-165, complete all as specified and directed by Engr-in-charge. |
| 36 | S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mmspacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying anycrossings with provn of MS wire staples or steel pins etc., complete all as specified and directed by Engr-in-charge. |
| 37 | M&L for two coats of cement base paint on walls including preparation of new plastered surfaces, complete all as specified and directed by Engr-in-charge. |
| 38 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. |
| 39 | Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed by Engr-in-charge. |
| 40 | M&L forglazed clolour ceramic tiles of size 300x450x6-7 mm thick as in dado laid over rendering in 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and directed by Engr-in-charge. |
| 41 | Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils, complete all as specified and directed by Engr-in-charge. |
| 42 | Restraining, resecuring including making good staples etc. ofgalvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mmspacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying anycrossings with provn of MS wire staples or steel pins etc., complete all as specified and directed by Engr-in-charge. |
| 43 | S& F in repairs writing letters or figures (Block, Roman, Italic or Indian)n exc 45 CM high in brass or CP brass metalic, as in Gate, Wall etc including all necessary fixing arrangement complete all as specified and directed by Engr-in-charge. |
| 44 | M&L for completer removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls etc and finishing with one coat of acrylic smooth exterior paint (100% acrylic) and including priming coat of extrior primer(acrylic base) in camuflage pattern/other pattern by using different tintsof irregular shape etc complete all as specified and directed by Engr-in-charge. |
| 45 | M&L for applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth including preparation of surfaces including necessary scaffholding, complete all as specified and directed by Engr-in-charge. |
| 46 | Schedule of Credit |
