|
| 1 | Excavation in trenches not exceeding 1.5 m depth and not exceeding 1.5m width and getting out in Soft/loose soil for laying of pipe lines. |
| 2 | Returning, refilling incl spreading, levelling watering and well ramming in layers not exceeding 25 cm thick with any type of soil all as directed |
| 3 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified as directed. |
| 4 | Taking up CI/DI water mains (including all fittings), with spigot and socket ends and lead joints/Titan Joints for the following size :- 150 mm bore |
| 5 | All as per item No. 4 above but for100 mm bore |
| 6 | S&F DI pipe (flanged/spigot type) laid in trenches of the following sizes :-150 mm dia |
| 7 | All as per item No. 6 above but for100 mm dia Note :-(i)Cost of DI specials shall be measured and paid separetely. |
| 8 | Cutting of DI/CI pipe in position for insertion of CI/DI specials of following sizes;-150 mm bore |
| 9 | All as per item No. 8 above but for100 mm bore |
| 10 | All as per item No. 8 above but for80 mm bore |
| 11 | M&L for DI Specials like bends, tappers, tee pieces all sockets, all spitgot, collars, caps & plugs any size & shape as ordered by Engineer- in- charge incl testing complete as specified & directed for the following sizes:-Up to 150 mm bore |
| 12 | M&L Run lead joint for water mains ofthe following size of CI / DI pipes :-150mm |
| 13 | All as per item No. 12 above but for100mm dia CI / DI pipeNote:- Excavation and earth work shall be measured and paid separately |
| 14 | Dismantaling the sluicevalvesin various location andreconditioning the sluice valve by replacing SSspindle, spindle nuts with brass ring, gland nuts, gland packing etc and refixing after proper repairs of the following sizes:-150 mm dia bore |
| 15 | All as per item No. 14 above but for100 mm dia bore |
| 16 | M&L for repacking stuffing box of sluice valve spindle including taking a part and reassembling of following sizes:-150 mm bore |
| 17 | All as per item No. 16 above but for100 mm bore |
| 18 | All as per item No. 16 above but for80 mm bore |
| 19 | Taking up the old/rusted/unsv GI/CI/HDPE pipes with fittings andconnected control gate valves/ Sluice valve/non return valve/foot valve etc. from sump/ trenches/ floors/rooffor the following size:- 20mm dia |
| 20 | All as per item No. 19 above but for25mm dia |
| 21 | All as per item No. 19 above but for40mm dia |
| 22 | All as per item No. 19 above but for50mm dia |
| 23 | All as per item No. 19 above but for80mm dia |
| 24 | All as per item No. 19 above but for100mm dia |
| 25 | S&F GI water tubing medium grade with all fitting (flanged/socket/union/tee etc) laid in trenches/walls/floors/roof of following sizes :-20mm dia |
| 26 | All as per item No. 25 above but for25mm dia |
| 27 | All as per item No. 25 above but for40mm dia |
| 28 | All as per item No. 25 above but for50mm dia |
| 29 | All as per item No. 25 above but for80mm dia |
| 30 | All as per item No. 25 above but for100mm dia |
| 31 | S&F brass non return valve 63/65/80 mm dia internal threded type complete including taking down the existing all as specified and as directed. |
| 32 | Supply & fixing in repairs of the following size gun metal Gate valve with iron wheel. 20 mm dia |
| 33 | All as per item No. 32 above but for25 mm dia |
| 34 | All as per item No. 32 above but for40 mm dia |
| 35 | All as per item No. 32 above but for50 mm dia |
| 36 | Dismantling Old valve pit complete with deteriorated MS cover and Construction of new brick massonry valve pit chamber of inner dimension 150x150x115 cms suitable for sluice valves upto 150mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement . |
| 37 | S&F in replacement of sluice valveboth side flanged and ISI marked (IS-780) of sluice valve cast iron body with S/S spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt, washers and rubber insortion packing 6mm thick etc of following sizes:-150 mm dia bore |
| 38 | All as per item No. 37 above but for100 mm dia bore |
| 39 | Removingof unserviceable foot valve from tank and replacement with new CI foot valve ball type of followingsizes:-150 mm dia bore |
| 40 | All as per item No. 39 above but for100 mm dia bore |
| 41 | All as per item No. 39 above but for80 mm dia bore |
| 42 | Removing old unserviceable float valve from service tank and supply and fix new float valve with PVC body aluminium float rod, nylon float high pressure type for the following size:-20 mm bore |
| 43 | All as per item No. 42 above but for25 mm bore |
| 44 | Taking out old unserviceable foot valve from UG sump and removing unserviceable leatherfrom suction line and replacement the same withhigh quality leatherincluding nuts, bolts, washer etc and servicingfor the following sizes. Make : Kartar / Kirloskar / Venus / Zoloto / Bir :-.150 mm bore |
| 45 | All as per item No. 44 above but for100 mm bore |
| 46 | All as per item No. 44 above but for80 mm bore |
| 47 | Supply and installation with testing complete of digital water level indication device operating on single phase supply direct display in 19 mm size (letter display) digit system in meter/CM of water of overhead tank ensuring alarm while water fall or rise over predetermined limits with the following description complete all as specified and as directed by Engineer-in-charge including dismantling old unserviceable water level indicator.(a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230V +10% at 50 Hz +5%, with reliable in display and alarm at low and high level head tank.(b) One circuit must be housed in high impact polystyrne molded box nylon mlded connection strips.The level system must resistance transducer, while unattested by corrosion and other contents avilable in water the product must be controlled by Micro switch.(c) The whole unit must electronically contolled and the upper level and lower level indications must be in two parts.Each complete part must be fitted in MS CRS sheet box separetaly.One must be installed at over head tank and second at pump house with proper powder coating paint with locking arrangements. |
| 48 | M&L for testing 03/04 core copper conductor PVC insulated heavy duty unsheathed cable 1100 volts grade 0.5 Sqmm from control box to display meter in ducts/on ground/through existing pipes etc including taking out unserviceable flexible cable all as specified and as directed. |
| 49 | M&L in replacement ofMechnical joints with collar and flange bolt ,rubber washer, nuts and bolts as existing at site of the following sizes ofCI/DI pipes :-150 mm bore |
| 50 | All as per item No. 49 above but for100 mm bore |
| 51 | All as per item No. 49 above but for80 mm bore |
| 52 | Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) completeand making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge. |
| 53 | M&L Point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiringincl GI/ MS brandedsunken boxes suitable for normal/modular concealedon walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable modulefixed with cadmium plated iron screws for housing modular/normal typeswitches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :-One light point controlled by one switch |
| 54 | All as per item No. 53 above but forOne fan point controlled by one switch / regulator |
| 55 | All as per item No. 53 above but forOne light point controlled by 2 way switch |
| 56 | All as per item No. 53 above but forOne 3 pin socket out let 5 Amps on independent board |
| 57 | All as per item No. 53 above but forOne bell / buzzer point controlled by bell push |
| 58 | All as per item No. 53 above but forOne 3 pin socket out let 5 A on same board |
| 59 | All as per item No 53 but concealed wiring drawn through existing PVC conduit.One light point controlled by one switch |
| 60 | All as per item No. 59 above but forOne fan/Exhaust point controlled by one switch/regulator |
| 61 | All as per item No. 59 above but forOne light point controlled by 2 way switch |
| 62 | All as per item No. 59 above but forOne 3 pin socket out let 5 Amps on independent board |
| 63 | All as per item No. 59 above but forOne bell / buzzer point controlled by bell push |
| 64 | All as per item No. 59 above but forOne 3 pin socket out let 5 A on same board |
| 65 | M&L Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through non-metalic existing PVC conduit medium density ISI markedincl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick GI/MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. |
| 66 | M&L Point wiring completewith 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC Casing & CapingISI marked incl accessories surface type wiringincl 1.6 mm thick GI/MS sunken boxes concealedon walls includinglaminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following One light point controlled by one switch |
| 67 | All as per item No. 66 above but forOne fan point controlled by one switch / regulator |
| 68 | All as per item No. 66 above but forOne light point controlled by 2 way switch |
| 69 | All as per item No. 66 above but forOne 3 pin socket out let 5 Amps on independent board |
| 70 | All as per item No. 66 above but forOne bell/buzzer point controlled by bell push |
| 71 | All as per item No. 66 above but forOne 3 pin socket out let 5 A on same board |
| 72 | M&L Point wiringcomplete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic PVC conduit medium density ISI markedincl accessories concealedtype run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheetconcealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. |
| 73 | M&L Point wiring completewith 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing capingISI marked incl incl accessories surface type wiring run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheetconcealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.Note for Item No 53 to 73 :-(i) The earth wire for the points in the same circuit can be looped from point to point(ii) Earth wire shall be taken inside the conduit(iii)Cost of terminal box is deemed to be included in the item rate quoted for point wiring(iv) Cost of a circuit ofany length of cablefrom DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in unit rate quoted . |
| 74 | M&L for groove cutting in wall/floor and making good of distrubed wall/floor, painting of existing colour all as specified and directed by Engineer -in-Charge. |
| 75 | S&F in repair LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminiumhousing & integrated LED channelcomplete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB20 W LED P or equivalent Makes & model of CA |
| 76 | S&F in repair LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic covercomplete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10W WH or equivalent Makes &model of CA |
| 77 | S&F in repair 2 x 2 RecessmountedLED Luminaire36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L LED WH GX MT or equivalent Makes & model of CA |
| 78 | S&F in repair 2 x 2 Surface mountedLED Luminaire36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L LED GX CW or equivalent Makes & model of CA |
| 79 | Supply and fix in repair Slim surface mounted round LED down lighterof 12wattaluminium die cast body with premium diffuser to ensure glare free & even distribution of light.Make & Model No:BGSLO SLEEK SURFACE 18 W WH RD LED of BAJAJor equivalent of CA |
| 80 | Supply and Fix in repair Modular switch 1 way 6A,1 module |
| 81 | Supply and fix in repair Modular switch 1 way 16A, 1 module |
| 82 | Supply and fix in repair Modular switch 2 way 6A,1 module |
| 83 | Supply and Fix in repair Modular Bell push 6A 1 module |
| 84 | Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module |
| 85 | Supply and fix in repair modular Socket 6A/16A - 2/3 pin combined 2 module, |
| 86 | Supply and fix in repair modular type Fan step regulator, 120W - 2 module |
| 87 | S&Fin repair of of Switch piano flush button single pole two way 5 Amps all as specified and as directed. |
| 88 | S&F in repair of Angle holder PVC/polycarbonate type all as specified and as directed |
| 89 | S&Fin repair of switch piano flush type single pole one way 5 Amps |
| 90 | S&Fin repair of switch socket combination5 pin2 in 1, 5 A Flush typeall as specified and asdirected |
| 91 | S&F in repair of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and asdirected |
| 92 | S&F in repair of bell push flush type 5A all as specified and as directed . |
| 93 | S&Fin repair ofMCB SPN 240 volts 32/40 Amps complete all as specified and as directed |
| 94 | S&F in repair of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed |
| 95 | S&F in repair ofMCB TPN 415 volts, 10KA \"C\" curve 63 Amps complete all as specified and as directed |
| 96 | S&F in repair ofMCB TPN 415 volts, 10KA \"C\" curve100 Amps complete all as specified and as directed |
| 97 | S&Fin repair of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbaras specified and as directed. |
| 98 | S&F in repair of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbaras specified and as directed. |
| 99 | S&Fin repair ofMCB DB TPN 4 way with double door type415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed. |
| 100 | S&F in repair ofceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 101 | S&Fin repair of stepped type electronic fan regulator flush Switch/socket type all as specified and as directed |
| 102 | S&Fin repair ofDing Dong bellAC 230 volts single pole. |
| 103 | Removing of old unsv existing submain wiring and provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed |
| 104 | Removing ofold unsv existing submain wiringand provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed |
| 105 | Removing ofold unsv existing submain wiring and provision of new sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5 Sqmm along with 2.5 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed.Note for item 103 to 105 : 3runs of cable and 1 run of conduit will be measured as unit length. |
| 106 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling and taking down old Earthing complete. |
| 107 | Supply and fixing in repair 30 WLED bldg securitylight fittingwith pressure die cast housing along with prismatic polycarbonate difuser with IP 66protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH PO PC SD or Equivalent Makes & model of CA |
| 108 | S&Fin repair of Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paintover a coat of red oxide primer including removing the old existing GIbracket from bldg complete all as specified and directed. |
| 109 | S&Fin repair Bulk Head Fittingsuitable for indoor application of 10 watt,including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Bajaj Cat part No: BIBWP 10W LED or its equivalent make of CA |
| 110 | S&Fin repair Decorative wall lightfixture made up of polycabonate suitable for indoor application of 9 watt LED lamp B22 base,including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Havells &Model : Globe or its equivalent make of CA |
| 111 | S&Fin repair LED Bulbsuitable for indoor application of 9 watt,to fit in Angle Holder or Decorative wall light fixture all as directed. Make & Model No: Havells Cat part No: ADORE LED PLUS 9 W or its equivalent make of CA |
| 112 | S&F Storage type water heater 25 Ltrs BEE 5 star ratedcomplete incl steel wired pipe for hot/cold water connection for inlet and out let wateretc completeall as specified and directed at site. Make Bajaj. Model No CALENTA 150801 or eqv on Venus / Havells) |
| 113 | S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE 3 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directedMake Bajaj, SABSE TEZZ EE 03. Model No 251120 or its equivalent in Havells / CG /USHA. |
| 114 | S&F Exhaust fansAC single phase 230/ 240 V of size 250/280/300 mm sweep with louvers fixed outside withall accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make :Bajaj cat No : 70002/3, FRESHEE 225/300 mm METALLIC GREY EXHAUST FA or its equivalent make of Havells / CGs / Orient |
| 115 | S&F in repairPVC Fresh air fan MAXIMA DXI G02 IVORY DOM EX FAN of 150mm sweep 1200/1400 RPM with louver. Make Bajaj 70506 or its equivalent make of CG / Usha / Orient / Phillips / Bajaj. IVORY DOM EX FAN |
| 116 | S&F in repairPVC Fresh air fan MAXIMA DXI WHITE DOM EX FAN of 200/225mm sweep 1200/1400 RPM with louver. Make- Bajaj.70079 orits equivalent in CG/ Usha / Orient / Phillips |
| 117 | S&Fin repairPVC Fresh air fan MAXIMA DXI WHITE DOM EX FAN of 250/300mm sweep 1200/1400 RPM with louver. Make-Bajaj.70049 orits equivalent CG / Usha / Orient / Phillips |
| 118 | S&F in repair replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20Amps |
| 119 | Inspection, taking down, dismantling of geysers of any type/capacity, cleaning, descaling, reassembling & reinstallation on the old place incl hydraulic pressure test of container with hand operated hydraulic pump complete, brazing inner tank, internal wiring and reinstallation after necessary repair/replacement of old parts all as specified & as directed. Note : Replacement of old parts shall be measured & paid separately. |
| 120 | Supply only stainless/Mild steel inner tank of capacity 25 ltrs unit including internally assembly of any size and type complete all as specified & as directed. |
| 121 | Supply onlyinternal assembly/apparatus rod unit of any size and type of capacity 25 ltrs complete all as specified & as directed. |
| 122 | Supply only heating element of 2 KW rating triangular/round typeas per existing size and type including rubber washers all as specified & as directed. |
| 123 | Supply only heating element of 2 KW rating Hexagonal spiral/bend type as per existing size and type including rubber washers all as specified & as directed. |
| 124 | Supply only Thermostat/auto cut off of suitable size and type for 25/50 Ltrs capacity of any size. |
| 125 | Supply only Indicator lamp red and green type square/round. |
| 126 | Supply only Safety valve/high pressure valve/NRV of exisitng type ISI marked. |
| 127 | Supply only PVC insulated Copper cable flexible 3 coreof size 40/0.0076ISI marked. |
| 128 | Supply only outer cover of geyger for capacity 25 ltrs unit complete with all fitting and fixtures as specified & as directed. |
| 129 | S&F in repairof exhaust fansouterframe for holding exhaust fan motor upto 280 mm sweep with supporting angle complete all as specified and directed. Make : Bajaj / CG / Havells / Khatian or its equivalent make of CA. |
| 130 | S&F in repairof exhaust fansouterframe for holding exhaust fan motor upto 300/230 mm sweep with supporting angle complete all as specified and directed. Make : Bajaj / CG / Havells / Khatian or Equivalent make of CA |
| 131 | M&L in repair louver of exhaust fan suitable for 300/230 mm sweep complete accessories all as specified and directed |
| 132 | M&L in repairlouver of exhaust fan suitable for 450 mm sweep complete accessories all as specified and directed |
| 133 | M&L for Preparation old painted surface & painting the geyser complete after cleaning & applying the same one coat of spray paint of white enamel, writing MES No incluingtaking down and refixing in same or other place complete all as specified & as directed by Engr -in-Charge. |
| 134 | Taking down ceiling fan 1200mm/1400mm and wall mounted fan 300/450 mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin,rubber pully etc., includingrefixingand connecting the same complete all as specified and as directed. |
| 135 | Inspection, disconnecting electric connecting and dismantling of ceiling fan/exhaust/wall mounted fan of any type/size, cleaning including oiling and greasing the bearing, tighting of nuts and bolts and refixing on the old place complete after necessary repair/replacement of old parts all as specified & as directed. Note : Replacement of old parts shall be measured & paid separately. |
| 136 | Supply only ball bearing of various sizes / make as required for ceiling fans/wall mounting/exhaust fan includinggreasing complete all as specified and as directed. |
| 137 | Supply only Gun metal bush of any size/make suitable for ceiling fans all as specified and as directed. |
| 138 | (c)Supply only capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed. |
| 139 | Supply only capacitor 4.0 Mfd suitable for ceiling / exhaust/wall mounting fans complete all as specified and as directed. |
| 140 | Supply only PVC flexible cable twin twisted core of 23/0.0076 size multi stranded copper conductor suitable for connecting ceiling fans / exhaust /wall mounting fans complete all as specified and as directed. |
| 141 | Supply only Rubber bush with MS bolts, nuts & washers with \"U\" clamps for ceiling fans complete all as specified and as directed. |
| 142 | Dismantling /opening the ceiling fan of 1200 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling/re-fixing in its p complete all as specified and as directed. |
| 143 | Dismantling /opening the ceiling fan of 1400 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 144 | Dismantling /opening the wall mounted fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 145 | Taking down exhaust fans 230 mm/300mm / 450mm sweep from position by duly disconnecting electric lines,preparing the surfaces,filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin,rubber pully etc., includingrefixingand connecting the same complete all as specified and as directed. |
| 146 | Dismantling /opening the exhaust fan of 230 mm/300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 147 | Dismantling /opening the exhaust fan of 450 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. |
| 148 | M&L extension of down rod for ceiling fanupto 1.5 mtr including nut, bolts , washers complete accessories all as specified and as directed. |
| 149 | S&F in repair capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed. |
