|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings completeall as specified and directed by Engr-in-charge. |
| 2 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws completeall as specified and directed by Engr-in-charge. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof , ridge / valley gutter, fixed with self tapping screws completeall as specified and directed by Engr-in-charge. |
| 4 | Dismantling of wall andceiling boards(fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover filletscompleteall as specified and directed by Engr-in-charge. |
| 5 | S&F hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, size of grid 605mm X605mm, fixed to roof slabs mean of ceilling cleats made out of GI flat 40X3mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long completeall as specified and directed by Engr-in-charge. |
| 6 | S&FGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457 mm centre to centre. size of grid 605mm X605mm completeall as specified and directed by Engr-in-charge. |
| 7 | S&F Non asbestos fiber cement building board 6mm thick (Designer ceiling board) , fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling completeall as specified and directed by Engr-in-charge. |
| 8 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc completeall as specified and directed by Engr-in-charge. |
| 9 | M&L for walling of random rubble masonry uncourced well bonded bedded and solidly hearted built in CM 1:6complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 completeall as specified and directed by Engr-in-charge. |
| 11 | M & L forcementconcrete type B-1 1:2:4 (using 20 mm graded stone aggregate), as incopings,lintels upto 1.5 m clear span, cills, etc including necessary form work as required completeall as specified and directed by Engr-in-charge. |
| 12 | M & L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 completeall as specified and directed by Engr-in-charge. |
| 13 | Demolition ofcement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) completeall as specified and directed by Engr-in-charge. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises completeall as specified and directed by Engr-in-charge. |
| 15 | M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm gradedstone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 16 | M&L Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. and over 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. completeall as specified and directed by Engr-in-charge. |
| 17 | All as per item No 16 above but as in Skirting/ dado etc, setand jointed in neat cement slurry and pointed in white or coloured cement to match shade of the tiles and including 10mm thick rendering as in backing coat in CM 1:6,completeall as specified and directed by Engr-in-charge. |
| 18 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match shade of the tiles including 15mm thick screed bed in CM 1:6, completeall as specified and directed by Engr-in-charge. |
| 19 | M&Lcoloured glazed ceramic tiles in vertical surfaces 300x 450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick rendering in CM 1:4 as in backing coat completeall as specified and directed by Engr-in-charge. |
| 20 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing and completeall as specified and directed by Engr-in-charge. |
| 21 | M & L for 40 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregatein flooringcompleteall as specified and directed by Engr-in-charge. |
| 22 | M & L for machine cut kota stone slab flooring 20 to 25 mm thick including over 20mm thick screed bed or bedding layer of cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and directed by Engr-in-charge. |
| 23 | M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid overincluding 15mm thick rendering as in backing coat in CM 1:4and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and directed by Engr-in-charge. |
| 24 | Taking down cement plaster any description from roof slab, stone wall, brick wall parapets including raking out joints hacking for key and scrubbing down with water etc completeall as specified and directed by Engr-in-charge. |
| 25 | M&L rendering 15mm thick on Brick or PCC block masonaryon wall surfaces in CM 1:4 finished even and smooth without using extra cement completeall as specified and directed by Engr-in-charge. |
| 26 | M & L for rendering 15 mm thick on faces of brick work or concrete surfaces in C M 1:6 and finish the surface even and smooth without using extra cementcompleteall as specified and directed by Engr-in-charge. |
| 27 | M&L preparing newly plastered surfaces of walland applying two coats of oil bound distemper over a coat of primer completeall as specified and directed by Engr-in-charge. |
| 28 | M &7 L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls over a coat of alkali resistance primer completeall as specified and directed by Engr-in-charge. |
| 29 | M&L complete removal of existing treatmentapplying two coat of cement base paint over a coat of primer on walls, etc completeall as specified and directed by Engr-in-charge. |
| 30 | M&L complete removal of existing treatmentapplying two coat of oil bond distermper white or tinned over a coat of primer on walls, etc completeall as specified and directed by Engr-in-charge. |
| 31 | Taking up or down 15mm boresteel tubing and connections including cleaning for refixing or removal to store completeall as specified and directed by Engr-in-charge. |
| 32 | Taking up or down 20m boresteel tubing and connections including cleaning for refixing or removal to store completeall as specified and directed by Engr-in-charge. |
| 33 | S&Fsteel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm completeall as specified and directed by Engr-in-charge. |
| 34 | S&Fsteel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm completeall as specified and directed by Engr-in-charge. |
| 35 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), whiteincluding Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device inclflush pipe etc completeall as specified and directed by Engr-in-charge. |
| 36 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern completeall as specified and directed by Engr-in-charge. |
| 37 | S&F in repairs for Wash basins, pedestal pattern Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , completeall as specified and directed by Engr-in-charge. |
| 38 | S&F in repairs vitreous china urinal half stall type flat back size ofwhite with grating and union for discharge pipe including chromium plated water spreader , connection pipe and discharge down pipe completeall as specified and directed by Engr-in-charge. |
| 39 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc completeall as specified and directed by Engr-in-charge. |
| 40 | S&F in repair brass CP Stop cock/ Angle cock 15mm fancy type choromium platedetc, completeall as specified and directed by Engr-in-charge. |
| 41 | S&Fin repairspillar taps cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm completeall as specified and directed by Engr-in-charge. |
| 42 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia completeall as specified and directed by Engr-in-charge. |
| 43 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm completeall as specified and directed by Engr-in-charge. |
| 44 | S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleatscompleteall as specified and directed by Engr-in-charge. |
| 45 | S&F in repair brass CP wall mixer, 15mm bore , for mixing hot & cold water screw down for iron pipe , completeall as specified and directed by Engr-in-charge. |
| 46 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completeall as specified and directed by Engr-in-charge. |
| 47 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall completeall as specified and directed by Engr-in-charge. |
| 48 | S&F in repair 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laidin trenches or in floors completeall as specified and directed by Engr-in-charge. |
| 49 | S&F of PVC bends of any radius 110mm dia bore completeall as specified and directed by Engr-in-charge. |
| 50 | S&F of PVC bends of any radius 75 mm dia bore completeall as specified and directed by Engr-in-charge. |
| 51 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement completeall as specified and directed by Engr-in-charge. |
| 52 | S & F toilet paper holder ,chromium plated fixed to wall with chromium plated brass screws completeall as specified and directed by Engr-in-charge. |
| 53 | S & F in repairs for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeall as specified and directed by Engr-in-charge. |
| 54 | S & Fin repairchromium plated shower rose 125mm size with or without swivel joint any size incl fixing to steel pipe or union completeall as specified and directed by Engr-in-charge. |
| 55 | S&F 1000 ltr. Capacity rotational moulded polyethylene water storage tankscylindrical vertical with closed top) hoisted and fixed in position including dismanteling old tanks and removing to store andincluding all fittings complete all as specified in SSR Part I completeall as specified and directed by Engr-in-charge. |
| 56 | M&L 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule completeall as specified and directed by Engr-in-charge. |
| 57 | S&F 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcompleteall as specified and directed by Engr-in-charge. |
| 58 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed by Engineer-In-Charge. |
| 59 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store completeall as specified and directed by Engr-in-charge. |
| 60 | Taking down shutters of any descriptionexceeding 1 Sqm but n exc 2 sqmeach completeall as specified and directed by Engr-in-charge. |
| 61 | S&F in Powder coated aluminium sliding windowthree track of styles 40mm x20 mm sheet thickness 1.2mmt wo shutter of glass and one shutter of wire mesh consisiting ofStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 91.80mmx31.75mmx1.2mm thick section (three track) with or without rebate. 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engr-in-Charge.Note: Size of window shall be as per site requirement. |
| 62 | S & F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 63 | S&F 2nd class hardwoodfactory made 30 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround completeall as specified and directed by Engr-in-charge. |
| 64 | Supply and fixing(factory Made)2nd class hard wood35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge.(Without sash bars) edges of framing plain chamfered or rounded fittedwith cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkatscompleteall as specified and directed by Engr-in-charge. |
| 65 | Material and labour for framed work as in steel doors of gates of angles or other section with gusset plates, rails, braces, etc. Complete,conforming to Fe-410W (Gde-E-250) quality \"B\", drilled for fixing of steel sheeting or other covering doors etc to be prepared hanging or sliding with and including either hooks and hinges or steelhangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete completeall as specified and directed by Engr-in-charge. |
| 66 | Material and labour for mild steel, plain, black sheet 1.60mm thick in steel gates, wall cladding and similar works, cut to size, holes punched, includinground headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turining up, mitred angles etc, as required completeall as specified and directed by Engr-in-charge. |
| 67 | M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer completeall as specified and directed by Engr-in-charge. |
| 68 | S&F in repair20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed by Engr-in-charge. |
| 69 | S & Ffactory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face completeall as specified and directed by Engr-in-charge. |
| 70 | S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and as directed by Engr-in-charge. |
| 71 | M&LAluminium anodised, barrel tower bolts of extruded section and fixed of size 200 mm complete all as specified and as directed by Engr-in-charge. |
| 72 | S&F 150 mm long aluminium anodised handles or extruded section completeall as specified and directed by Engr-in-charge. |
| 73 | S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloycompleteall as specified and directed by Engr-in-charge. |
| 74 | S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate completeall as specified and directed by Engr-in-charge. |
| 75 | S&F floordoor stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel springcomplete all as directed by Engineer-in-charge. |
| 76 | Supply & fixing for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks, or galvanised wire staples. & directed by Engr-in-charge. |
| 77 | S&F aluminium colour powder coated anodised door and shutter or double leaf glazed/pre laminated board exterior quality partly glazed/pre laminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size including taking down existing old door of any description complete comprising the following:-(a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per spd(b) Aluminium colour anodised verticle section inshutter 85x44.45x2 mm as per spd(c) Aluminium colour anodised top & style shutter section 95.25x44.45x2.00 mm as spd (d) Aluminium clolour anodised handle 02 Nos in each shutter 200 mm long as spd(e) Aluminium clolour anodised middle lock rail/bottom rail section 150x44.x2.65mm cat No 20002 Make Jindal. (f) Floor spring(g) Six lever mortice lock brass in each door. (h) 12mm thick acrylic sheet board /pre laminated board both face exterior grade ISI Marked. (j)5 mm thick tinted glass/plain glass .Note :- If ground requirment for full glass or full panel contractor should provide Complete all as specified and as directed by Engr-in-charge. |
| 78 | S & F door closer hydraucalically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed completeall as specified and directed by Engr-in-charge. |
| 79 | M&L for 75 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement completeall as specified and directed by Engr-in-charge. |
| 80 | M & L preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge. |
| 81 | Material & labour for two coats of synthetic enamelled painton old steel surfacesexc 10cm width or girth including preparation of surfaces.completeall as specified and directed by Engr-in-charge. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, completeall as specified and directed by Engr-in-charge. |
| 83 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framedbalusters, railingsetc completeall as specified and directed by Engr-in-charge. |
| 84 | Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. includingmaking good to the disturbed surfaces of wall, roofand floor etc. to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continuous earthing in & incl PVC Casing capeing & condut as per site reqdwith accessories having ISI mark fixed on wall surfaces / ceilingincluding provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 86 | All as per Srl item No 85 here-in-before but controlled with one 5 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 87 | All as per Srl item No 85 here-in-before but controlled with one 5 pin socket outlet 5 Amp on Independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 88 | All as per Srl item No 85 here-in-before but controlled with one 5 pin socket outlet 15 Amp, independent board withcable 2.5 sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 89 | Supply and fixing in replacement ofswitch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 90 | Supply and fixing in replacement ofsocket outlet 5 pin 15 Amp 2-in-one230 Volt flush typecomplete all as specified and directed by Engineer -in-Charge. |
| 91 | Supply and fixing in replacement ofsocket outlet 5 pin 5 Amp 2-in-one230 Volt flush typecomplete all as specified and directed by Engineer -in-Charge. |
| 92 | Supply and fixing in replacement of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 93 | Supply and fixing in replacement ofCeiling rose, 3 terminal with ISI markall as specified and directed by Engr-In-Charge. |
| 94 | Supply and fixing in replacement of surface & wall mounted LED 20W tube light fitting 4 feet with high quality material and design, extruded aluminium housing enhances safety. High quality PC diffuser, reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install efficacy 125 limen/ watt all accessories as specified and directed by Eng-in-Charge. |
| 95 | Supply and fixing in replacement oflamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings completeall as specified and directed by Engr-in-charge. |
| 96 | Supply and fixing in replacement of LED lamp 12 W energy saving upto 80%, BEE ratedwith all accessories all as specified and directed by Engg-in-Charge. |
| 97 | Supply and fixing in replacement ofstepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc.all as specified and directed by Engg-in-Charge. |
| 98 | Supply and fixing in replacement ofLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeall as specified and directed by Engr-in-charge. |
| 99 | Supply and fixing in replacement ofbulk head light with 10 W LED Lamp completeall as specified and directed by Engr-in-charge. |
| 100 | Supply and fixing in replacement of Steel body exhaust AC, Single Phase 380 mm sweep 1400 RPM,with louvre complete all as per specified and directed by Engineer-in-Charge. |
| 101 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixing in replacement ofMCBSPN 32Amp,10 KA all as specified and directed by Engineer-in-Charge |
| 104 | Supply and fixing in replacement ofMCBSPN 40Amp,10 KA all as specified and directed by Engineer-in-Charge |
| 105 | Supply and fixing in replacement of MCB SP 16 Amp, 10 KA. all as specified and directed by Engineer-in-Charge. |
| 106 | Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel wire mesh and medium grade GI earth strip protection pipe 40mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completioncomplete all as specified and directed by Engr-in-charge. Note : The units rate includes the cost of excavation & earth work in any type of soil charcoal & salt in altemate layers, 20mm GI Pipe (light grade) for watering 40mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. |
| 107 | Supply and laying or fixing or passing through pipe, 1100voltsgrade heavy dutycablewith PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tapeandoverall PVC sheathed 10sq.mm nominal cross section in service connections , complete all as per specified and directed by Engineer-in-Charge. |
| 108 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil for laying/jointing kit/repair of cable and erection of poles complete all as specified and directed |
| 109 | Returning and filling in two parts (i) using riddled soil obtained from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil completeall as specified and directed by Engr-in-charge.Note- (i)Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS - 1255-1983 and refilling in trenches as in cable cushioning. (ii) Surplus soil if any shall not be removed but left proud over the trench |
| 110 | Supply and lay well burntclass ‘B’ bricks as mechanicalprotection to under ground cables laying with length of the bricks equal to the width of the trench completeall as specified and directed by Engr-in-charge. |
| 111 | M&L for taking out old unserviceable and supply, laying, fixing Double walled corrugated HDPE duct pipe of 25 mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection completeall as specified and directed by Engr-in-charge. |
| 112 | Schedule of Credit |
