Tender For Addn/ Altn And Special Repairs To Sailors Married Accommodation At Sma (Nb); 1 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area exc 1.5 sqm but not exc 4 sqm eachof size complete all as specified and directed. 2 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area not exc 1.5 sqm eachof size complete all as specified and directed. 3 S&F second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 4 S&F 2nd class hard wood, 35mm thick factory made door shuttersPlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified and as directed. 5 S&F 2nd class hard wood, 35 thick Glazed skelton shutters open rebated and prepared to recive gauze etc (withoutsash bars) edges of framing ,plain chamfered or rounded fitted with cut and mitread beads for securing glass ectc size of members of shutters as specified in SSR Pt-I section 8 cl 24 (a). 6 M&L for 18-19 mm thick Marine plywood with both side laminated mica sheet glossy finished (not less than1mm) water proof, termite & borer proof, corrosion free with melamine polished shutter for C.B complete all as specified and directed. 7 M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. 8 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter andnecessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. 9 M&L second class HW plain fillets square or rectangular in section areaexeeding 13 sqcm but not exeeding 25 square cm fixed with screws. 10 S&F in repair magnet catcher to wooden frame work complete all as specified and directed. 11 S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to woodtrusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified. 12 S&F butt hinges medium weight 100mmStainless steel hinges complete all as specified 13 S&FButt hinges,100mm heavy weight, cold rolled mild steel, and fixed complete all as specified. 14 S&f Prelaminated particle board 12mm thick , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete for CB inside 15 M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed. 16 M&L for 150mm size aluminium tower bolt (ISI Marked)anodized, fixed complete all as specified and directed. 17 S&F Floor door stopper of Aluminiumalloy body and tongue , anodised with hard drawn steel spring, fixed in steel (overall length of cover plate 140mm) all as specified. 18 S&F 250mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified. 19 S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. 20 S&F 75mm hasp and staple Aluminium anodised (ISI Marked) fixed with screws all as specified. 21 S/F powder coated aluminium grill (powder coated transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete and directed by Engr-in-charge. 22 Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC (profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 23 Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each 24 Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear madeof mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area exceeding 1.00 sqm but not exceeding 2.00 sqm each 25 S & F sheet glasses, plain4.00mm thickglazingall withaluminum beading& rubber gaskets etcexc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. 26 S & F sheet glasses, plain4.00mm thickglazingall withaluminum beading& rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. 27 S & F Figured glass, pin head type plain4.00mm thickglazingall withaluminum beading& rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. 28 S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staplescomplete all as directed by Engr in charge.. 29 Demolition of cement concrete unreinforced in anyPosition all as specified. 30 M&L PCCtype B-1, 1:2:4 (20mm graded aggregate) 25mm thick all as specified. 31 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified. 32 M& L for Glazed ceramic coloured tiles in vertical surface area exceeding 0.11 sqm not exc 0.36 sqm 7to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchincludingrendering 10 mm thick in CM 1:3 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed. 33 M&L Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.36 sqm in floor with approved Patternover cement screed 15 mm thick in CM 1:4 etc set including 2mm thick Spacer shall be provided between the tiles and Epoxy tile joint filling using Nitotile EPW(Fosroc) or equivalent,quoted rate is inclusive of the same. 34 M&L Non - skid Ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors with approved Patternover cement sreed 15 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 35 M&L Non - skid Ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting over cement backing coat 10mm thick in CM 1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cementto match complete all as specified and directed. 36 M&L 75mm thick PCC Type C1 1:3:6 (20mm graded agg) as in plinth protection finished even and smooth without using extra cement with 10 cm caving at junction of wall and plinth protection all as specified. 37 M & L for Machine cut mirror polished kotastone slab flooring 20-25mm thick over cement15mm thick screed bed in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl complete all as specified 38 M&L (pre polished) Kota stone slab 20-25mm thick ( in single piece) as in tread/ riser of steps, skirting, dado and pillar laid over backing coat 10mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingcomplete all as specified and directed. 39 M&LMarble tiles 30cmx20cm x 18-20mm thick machine cut makrana white Marble tile laid over cement screed CM 1:4 15 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as spcified as boarder to kota stone flooring. 40 Demolition of stone slabs of any description or thickness laid bedded in any mortar all as specified. 41 M & Lfor 18-20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like 20mm thk in cement mortar (1:4) including pointing in white cement (1:2) using marble dust withadmixture of pigment to match with shade of granite complete all as specified and directed . 42 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement 43 Demolition of brick/PCC Block masonary work built in cement mortar all as specified. 44 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. 45 M&Lcement Plaster in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even fair without using extra cement with using Approved WPC complete all as specified and as directed.(Note : WPC shall be meassured separate item). All chajja top coving shall be provided properly and finished with external plaster as in above. Drip course shall be maintained. 46 M&L for rendering 10 mm thick on fair faces internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. 47 M&L for rendering 5mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete ceiling surfaces complete all as specified and as directed. 48 Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge. 49 M & L for preparation of new plastered external wall surface and applying two coats of Antifungal and anti algae premium exterior emulsion (Apex Ultima protek/weather coat life long 10 or equivalentpaint over two coat of elastomeric waterproofing membrane as per manufacturer instruction complete all as specified. Note: (i) The new surface shall be prepared using mechanical ways i.e jet spray, grinding etc, in such a manner so that there should not be any impression of dent, all cracks to be filled with crack filler and it should be made even all as per manufacturer instruction before application of primer/base coat and emulsion paint.The cost of materials, labour & T&Pwherever required for preparation of surface are deemed to be included in the rates quoted.(ii). The work must be got executed through authorised applicator of manufacturer. The MoU between contractor and paint manufacturer to this effect shall be submitted prior to execution of these items.(iii) The conractor shall be submitted performance guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completetion of entire work (iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor 50 M & L for preparation new plaster on internal surface of walland applying one coat of wall care putty 1mm thick on new wall surfaces & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed by Engineer in charge 51 M & L for preparation of new ceiling surface and applying one coat of wall care putty 1mm thick on new wall surfaces & applying two coats of distemper oil emulsion over a coat of alkali resisant primer white all as speciedand directed by Engineer in charge 52 M & L for complete removal of existing treatment on internal surfaces of walls, applying one coat of wall care putty 1mm thick on wall surfaces & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primerall as specified and directed by Engineer in charge. 53 M & L for complete removal of existing surface finishes of external wall surface and applying two coats of Antifungal and anti algae premium exterior emulsion (Apex Ultima protek/weather coat life long 10 or equivalentpaint over two coat of elastomeric waterproofing membrane as per manufacturer instructioncomplete all as specified. Note: (i) The old surface shall be prepared using mechanical ways i.e jet spray, grinding etc, in such a manner so that there should not be any impression of dent, all cracks to be filled with crack filler and it should be made even all as per manufacturer instruction before application of primer/base coat and emulsion paint.The cost of materials, labour & T&Pwherever required for preparation of surface are deemed to be included in the rates quoted.(ii). The work must be got executed through authorised applicator of manufacturer. The MoU between contractor and paint manufacturer to this effect shall be submitted prior to execution of these items.(iii) The conractor shall be submitted performance guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completetion of entire work (iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor 54 M&L Complete removal of old decorated surface of ceiling including cornices (Plastered or unplastered) andapplying one coat of wall care putty 1mm thick on wall surfaces & applying two coats of distemper oil emulsion over a coat of alkali resisantall as specified and directed by Engineer in charge complete all as specified and directed. 55 M&L Preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 56 M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. 57 Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified 58 M&L for rendeing 10 mm thickon concrete surfaces in CM 1:3 including WPC as per manufacturers instrs complete all as specified and as directedby Engr-in-charge.(WPC measured and paid seperately), Note :-Qouted rate to include for necessary scaffolding. 59 M & L The water proofing treatment in Seven course and shall be carried out as follows: -(i) Apply a coat of oil based bituminous primer @ 200 gram / square metre on the prepared surface.(ii) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area.(iii) Provide and lay 4mm thick APP modified torch applied water proofing membrane weighing not less than 4.00 Kg per square meter reinforced with non woven polyester matt, weighing not less than 160gm/sqm having softening point not less than 1400C, Longitudinal tensile strength not less than 600 N/50 MM, tear strength of 180N(Min), a static puncture resistance of 180, keeping a minimum of 10 cm over laps and 15cm end lap.(iv) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area.(v) Provide and lay 4mm thick APP modified torch applied water proofing membrane weighing not less than 4.00 Kg per square meter reinforced with non woven polyester matt, weighing not less than 160gm/sqm having softening point not less than 1400C, Longitudinal tensile strength not less than 650N/50mm, tear strength of 180N(Min), a static puncture resistance of 180, keeping a minimum of 10 cm over laps and 15cm end lap.(vi)Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area.(vii) Finishing surface with solar reflective bituminous aluminium paint, @ 100 gm/Sqm. 60 Antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc all as specified. 61 M&L Antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along internal wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors all as specified. 62 M&L Antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing all as specified. 63 M&L Antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same all as specified. 64 S&F in repair counter Top wash Basin for hand wash white flat back of size 550x445mm fixed or laid on granite platform includingbrackets, waste pipe & CP brass waste coupling of 32mm dia including pillar tapcomplete all as specified and directed. 65 S&F in repair 450 mmPVC connection 15 mm size with PTMT nut of following length complete all as specified and directed . 66 S&F in repairs viterous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. 67 S & F in repairs Soap dish Stainless steel with chromium plated complete all as specified.Make : Prayag Cat No T6403A1 or equivalent make in approved list 68 S&F CPin repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified Prayag Cat No BA-30 or equivalent make in approved list . 69 S&F in repair for SS towel ring of standard quality complete all as specified and directed.Prayag Cat No BA-31 or equivalent make in approved list 70 S&F in repairSink with drain board made of stainless steel l mm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 40mm PTMT waste coupling of min wt. 60 gmscomplete all as specified. 71 S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs all as specified. 72 Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified. 73 S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings joints fixed to wall with claps including all as specified 74 S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings joints fixed to wall with claps including all as specified 75 S&F PVC (SWR) bends 110 mm diawith access door all as specified. 76 S&F PVC (SWR) bends 75 mm dia with access door all as specified. 77 S&F PVC (SWR) 110 mm dia vent cowl all as specified. 78 S& F PVC (SWR) 75mm dia vent cowl all as specified. 79 S&F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement all as specified. 80 S & F 110mm dia PVC (SWR) T single junction with access door all as specified. 81 S & F 75 mm dia PVC (SWR) T single junction with access door all as specified. 82 S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified. 83 S&F in repairs stainless steel plate rack of size 36inchX31InchX10 Inch made out of 0.63mm thick stanless steel sheet (Grade AISI 304 18/8) SS screw and round pipe fixed to wall with screw s complete all as specified and as directed.[Make- Blue star sliver shine cat No KPR-315 or Equivalent from Nirali/Jain Brothers Sanitation Pvt Ltd (Jayna) as approved by GE 84 S&F in repairs 32 mm dia PVC waste pipefor wash hand basin down pipe complete all as specified and directed 85 M & L 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or conc surfaces and finished even & fair complete all as specified.(Note : water proofing compound paid separately) 86 M&L for water proofing for sunken slabsincluding all materialsas per the stages described below, complete all as specified and as directed. (a)Remove all dust, oil, dirt, laitance and other containments, loose particlesfrom concrete surface . (b) Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement.(c) Annular space of out let/spoutpipesshall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. (d) Carrying outponding for minimum of 48 hours (e)Injection grouting of all leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. (f) Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over the surface using spray/ squngee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ASTMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed.Make:- FOSROC or equivalent as approved. 87 M&L 30mm thick PCC (1:2:4) type B1 (Using 12.5mm graded stone aggregate) for sub base of sunken portion complete all as specified 88 M&L for PCC type D2 1:4:8 (40mm aggregate) in sunken floor of toilet/bathroom finished fair and even 89 M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2as water spout in sunken floor complete all as specified and directed. 90 S & Fin repair Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all make as specified and directed by Engineer-in-Charge.Prayag Cat No BEA-46 or equivalent in approved list 91 S&F in repairGlass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplerte all as specified and directed by Engineer-in-Charge. Prayag Cat No BEA-47 or equivalent make in approved list 92 S&F in repair for 25 mm curtain rod powder coated anodized aluminium alloy complet all as spd and directed 93 S & F in repairs bracket for fixing curtain rods. 94 S&F in repair PVC knobs 35-40mm diacomplet all as specified and directed. 95 Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high all as specified. 96 Index hands (natural size) or arrows (upto 40cm long) as directed 97 Treating crumple joints with necessary treatment etc complete by racking out joints, clearing of loose particles, providing preformed expendable synthetic filler board and top 15mm primed and sealant throughout the length of joints incl fixingaluminium sheets of 1mm thickness and 150mm length to with brass screws / washers all as speicified.(Make: BASF/Fosroc/IWL/ STP Ltd) 98 Demolition of cement concrete (reinforced) in any description and in any position not otherwise specifically provided for (reinforcement put as required) 99 M&L for RCC(Nominal Mix) in type-B1 1:1.5:3 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole covers,drains. 100 M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. 101 S&F in repair peg set of 6 pin complete all as specified and directed. 102 S&F in repair Rope wire dia 2.5mm for drying hanging clothes/clothes line/washing l ine/Rope wire for Terrace, Balcony, Indoor-25M Heavy Duty Steel wire with PVC coatingincluding fasteners and instalation tool help to manage the rope complete all as specified and directed 103 M&L for Micro concreting in RCC coloumns, soffit of slab and Beamsincluding chemicals, reinforcement ,with 02 coats ofpolymer mortar ofAvg thickness 20-25mm (each coat) over a coat of epoxy resin based bonding agent over two coat of zinc primer over a coat of epoxy bond agent fcomplete all as specified and directed by Engr-in-charge 104 S&F S/S Continuous ( Piano) hinges width of flap30 mmfixed 105 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations 106 M&LFormwork to rough finished surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified 107 M&L Cutting holes in brick walls (not exc half brick) built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified. 108 M&L for Preparing surfaces of steel and iron work, new or old, small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, and treated with tar or coal tar black paint treating complete all as specified. 109 S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified. 110 M&L forcement concrete Avg. 30 mm thick type B-0, 1:2:4 (12.5 mm graded aggregate) as padding on roof slab complete all as specified and as directed by Engr-in-Charge 111 M&L for 18-19mm thick Marine plywood with laminated mica sheet glossy finished (not less than 1mm) covered kitchen cabinets (depth not less than 55 cm), water proof, termite & Borer proof, corrosion free with melamine polished shutter and auto closer counter sunk hinges minimum two nos per leaf stainless steel handles one per leaf complete all as directed . 112 Material and labour for 100 mm thick plain cement concrete (1:2:4)type B-2 using 40mm graded crushed stone aggregate as in hard standing, laid in alternate bays including necessary form work and finishing the surface of concrete fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge. 113 M&L forPCC 1:4:8 Type D2 ( 40mm graded aggregate) in foundations, filling and mass concrete 114 M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified 115 M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 116 M&L for Coarse aggregate as in exshioning for paver block graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required all as specified. 117 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compleye all as specified 118 Dismantling and refixing the samemachine pressed precast concrete interlocking paver block any shapewith grey cemen as in footparth, parks, lawns, drive ways or light traffic parking etc., laid in required pattern over not less than12.5mm coarse aggregate compacting and proper embedding/ laying of inter locking paver blocks into the coarse aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specifiedNote :- After removing existinginterlocking paver block necessary levelling of coarse aggregate for cushoning below paver block graded not less than12.5mm spreading and levelling in layers of thickness 30mm shall be carried out before laying. 119 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified. 120 M&L for precast cemnet concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. 121 M&L 15 mm thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement. 122 S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed. 123 M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. 124 Supplying and laying of CPVC pipes 25 mm outter dia high pressure SDR 13.5 & Plain CPVC SDR 11 fittings in trenches/ on wall completeincluding all necessary fittings, solvents, complete all as specified and directed. 125 Supplying and laying of CPVC pipes 20 mm outter dia high pressure SDR 13.5 & Plain CPVC SDR 11 fittings in trenches/ on wall completeincluding all necessary fittings, solvents, complete all as specified and directed. 126 Supplying and laying of CPVC pipes 50 mm outter dia high pressure SDR 13.5 & Plain CPVC SDR 11 fittings in trenches/ on wall completeincluding all necessary fittings, solvents, complete all as specified and directed. 127 Supply and fix in repairs of 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, short body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed by the Engineer in Charge. Make : Cera Cat. Part No. F2004151 or any other make from the approved list of manufactures. 128 Supply and fix in repairs of 15mm size Chromium Plated cast copper alloy Bib Cock, short body with flange and nozzle for garden/ washing machine, complete all as specified and as directed by the Engineer in Charge.Make : CERA Model No. F 2003153 or any other make from the approved list of manufactures. 129 Supply and fix in repairs 15mm size Chromium Plated cast copper alloy Angle Valve, half turn with flange, for fixing with CPVC pipe, complete all as specified and as directed by the Engineer in Charge.Make : CERA Model No. F 2004201 or any other make from the approved list of manufactures. 130 Supply and fix in repairs of 15mm size Swivel Overhead Shower (minimum weight 40 grams) of PTMT, any colour with shower arm (minimum weight 40 grams) 195mm long with bend of 45 degree with flange, fixing with CPVC Pipe, complete all as specified and as directed by the Engineer in Charge.Make : CERA Model No. F 7020104 or any other make from the approved list of manufactures. 131 Supply and fix in repairs of 450mm long, 15mm dia. PVC Connection with brass union on both sides to suit 15mm GI pipe, complete all as specified and directed by the Engineer in Charge. 132 Supply and fix in repairs of Health Faucet, ABS body with wall hook and one metre SS braided rubber hose pipe, complete all as per specified and directed.Make : CERA Model No. F 8030102 or any other make from the approved list of manufactures. 133 Supply and fix in repairs Wall Mixer (3-in-1) with arrangement of both Telephonic Shower and Over Head Shower, with 210mm long bend pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No.F1018402 or any other make from the approved list of manufactures. 134 Supply and fix in repairs of Chromium Plated cast copper alloy Kitchen Sink Cock, quarter turn, wall mounted with swivel spout not less than 150 mm and wall flange complete all as specified and as directed.Make : Model No.F1018251 of CERA or any other make from the approved list of manufactures. 135 M&L for cutting chases on walls, floors etc. not exceeding 10cm girth and making good the disturbed surface to match with the existing surface after removing the existing concealed pipe/ laying new pipe, complete all as specified and directed by the Engineer in Charge. 136 Supply and fix in repairs of 1000 litres capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical, vertical with closed top), hoisted & fixed in position, complete all as specified and as directed. 137 Supply and fix in repairs of 50mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.Make:Supreme 138 Supply and fix in repairs of 25mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.Make: Supreme 139 Supply and fix in repairs of 12mm dia. Chromium Plated Pipe for Hot and Cold water, of suitable length, with two brass adopter and connecting up, complete all as specified and directed by Engineer in Charge. 140 Taking down old u/s GI tube any size an make all as specified and directed 141 Taking down old u/s PVC tank any capacity or any type and any make all as specified and directed 142 Taking down carefully existig copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete withfitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfacesof walls and roofs etc.and to match with existing colour complete all as specified and directed. 143 Taking down carefully unserviceable main switches and distribution boards with fuses/ MCBs (single phase or three phase) of any capacity all as specified and directed. 144 Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified 145 M&L pvc single core sheated cable One light point or one fan point controlled by one switch with cables 1.5 sq.mm size with copper conductor cables FRLS in pvc conduit complete all as specified and as directed. 146 All as per item no 146 here in before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board. 147 All as per item no 146 here in before but One 3 pin 5 Amp socket outlet point controlled by one switch on sameboard. 148 All as per item no 146 here in before but One light point controlled by two way s w i t c h e s ,with cables1.5 sq. mm 149 All as per item no 146 here in before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size 150 All as per item No.146 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. 151 All as per item No. 146 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. 152 M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 153 M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 154 S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 155 S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 156 M&L Bell push modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 157 S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals dulyISI marked complete all as specified and directed.Make: Legrand/ Seimens/ Schneider 158 S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 159 M&L Switch modular type 6 amps, 1 module single pole two way duly ISI marked, complete all as specified and directed. Make: Legrand/ Seimens/ Schneider 160 S&F LED Batten CRCA enclosed channel box type for LED T8 Retrofit tube 1x20 Watt, 4 feet, 220-240 Volts, Industrial grade aluminium extrusion duly powder coated fitted with lamp holder at both side to mount LED T8 retrofit tube rod (with tube rod) high lumen LEDs and milky opal diffuser for glare free light including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make- Shakti, Cat Part No. SZSRFBT1x20 or equivalent in Crompton/ Surya/ Havells. 161 S&F in replacement of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete. 162 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete 163 S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.. 164 S&F in replacement of Factory made three phase and neutral sheet steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming MCBs and outgoing MCB the second for protection of MCBs fitted with colour AL bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 415V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.Make: Legrand/ Seimens/ Schneider 165 S&F in replacement of Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.Make: Legrand/ Seimens/ Schneider 166 S&F MCCB TP, 160 Amps, 415 volts,rated service short circuit breaking capacity Ics= Icu at 415V ,27 KA duly ISI marked, in DB, complete with connection testing and commissioning all as specified. Make: Legrand/ Seimens/ Schneider 167 S&F MCB SPN, 40A - 63Amps, 240 volts, C series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.Make: Legrand/ Seimens/ Schneider 168 S&F MCB SP, 6A-40 Amps, 240 volts, C series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.Make: Legrand/ Seimens/ Schneider 169 M&L for Sub main wiring with two single core 10 Sqmm FRLS insulated and sheathed stranded copper conductoralongwith earth wire 10 Sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (two runs cable and one number earth wire and suitableFRLS conduit shall measured together as unit length). 170 M&L for Sub main wiring with two single core 6 sqmm FRLS insulated and unsheathed stranded copper conductoralongwith earth wire 4.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitableFRLS conduit shall measured together as unit length). 171 S&F in replacement of ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to ceilng fan max 1.5 mtr for giving connection complete all as specified. Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard.Make: Atomberg Cat Part No. AMEZA/ Orient Model Ecotech Neu BLDC 5 star/ Gold Medal Cat Part No. GEO FOX White 172 S&F of exhaust fan steel body heavy duty with louvers complete of sweep size 300 mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including suitable size of cutting/opening the wall for fixing and provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Note : Old fans to be deposite at AGE E/M (NW) store yard. 173 S&Fixing of exhaust fan plastic body heavy duty with louvers complete of sweep size 250mm, 1200 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including suitable size of cutting/opening the wall for fixing and provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. 174 S & fixing of integral LED Aviation light 10Wcomprising of aluminium housing with polycarbonate enclosure complete all as specified 175 Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009). 176 M & L and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 85 sq mm 3.5 core all as specified. 177 S&F in repairs, SPN Enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA,including taking down old unserviceable earth plug, complete all as specified and directed. 178 Supply and fixing 25 litre capacity Electric Water Heater, Storage type, steel body with copper inner tank and heating element upto 2 KW, BEE 5 Star rated, with all accessories such as safety valve, thermostat, NRV, connection piece etc., complete all as specified and as directed. 179 M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified. 180 Taking down old u/s cable in ground/air any size and make all as specified and as directed 181 M&L for cutting chases on walls, floors etc. not exceeding 10cm girth and making good the disturbed surface to match with the existing surface after removing the existing concealed pipe/ laying new pipe, complete all as specified and directed by the Engineer in Charge. 182 M & L of Air termination, single pointed aluminium rod 12mm dia and 300mm longcomplete all as specified. 183 M & L of Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. 184 M & L of GI strip 32x6mm buried directly in ground or fixed to walls complete all as specified and directed. 185 M & L of test point terminal block made of gun metal or phosphorus bronze of size 75mm x 75mm x 25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw for fixing the same on wall, including suitable size of coverd MS box of 1.5mm thick complete all as specified and directed. 186 Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground level with top edge of the earth plate at a depth not less than 2.25mtr below ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcol dust and common salt filling in alternate layers all around top and bottom and electrode connection by using galvanised iron earth lead strip of size 32 x 6mm flat iron by means of bolts, nuts, check nut and washers made of galvanised iron pipe 20mm bore medium grade for watering with funnel and wire mesh including galvanised iron pipe 40mm bore protection pipe light grade for protection strip upto 3m above ground level (Up to the test points) PCC chambeer in cement concrete (1:3:6) type C-2 and RCC pit cover in M-25 (design mix) complete all as shown in electric plate No-3 of the MES standard schedule of rates (Part-I) of 2009 complete all as specified and testing on completion:-(a) The unit rate shall include for protection pipe, GI water pipe, funnel, wire mesh excavation, RCC pit cover, test point, 32x6mm galvanised strip from top of earth plate upto 5mtr above GL anf if GI protection is less than 5m, no price adjustment shall be made. (b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc. shall be deemed to be included in the unit rate. (c) If the testing result of earth Wk is not been found satisfactory then the contractor shall do other earthing work at his own cost and nothing shall be permissible on the account. (d) Earthing work will be carried out in presence of MES representative. 187 Taking down existing u/s aluminium strip complete all as specified and directed 188 Same as item No. 194 but airtermination rod. 189 Same as item No. 194 but test point 190 Supply and fix LED T type retrofit fitting 14 Watt, 6500-7500K, 1400 Lumen, polycarbonate material complete all as specified and directed.Make: Philips Cat Part No. TLL-14W-6500K-B22 or equivalent to make specified in PS.
