Tender For Renovation Of Rain Water Harvesting Tank Inside The Campus Of Dr. R.P. Hospital, Mayabunder Under Sub Division No.I, Nacd, Apwd, Mayabunder
Tender Value
7.75 Lakhs
Estimated cost
Bid Submission
22 Sep 2025
0 days left
EMD
15503
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mayabunder → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Rain Water Harvesting Tank Inside The Campus Of Dr. R.P. Hospital, Mayabunder Under Sub Division No.I, Nacd, Apwd, Mayabunder
BOQ
| Sl. No. | Item Description |
| 1 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mmnominalsize derivedfromnatural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling&dressing & finishing the top smooth. |
| 2 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 4 | 40 mm thick with 20 mm nominal size stone aggregate |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 6 | Gutter (600 mm over all girth) |
| 7 | 20 mm cement plaster of mix : |
| 8 | 1:4 (1 cement: 4 fine sand) |
| 9 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 10 | 20 mm cement plaster |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 12 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 15 | 100 mm nominal dia Pipes |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 17 | 15 mm dia nominal bore |
| 18 | 25 mm dia nominal bore |
| 19 | 40 mm dia nominal bore |
| 20 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 21 | 25 to 40 mm nominal bore |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 23 | 25 mm nominal bore |
| 24 | 40 mm nominal bore |
| 25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 26 | 15 mm nominal bore |
| 27 | 25 mm nominal bore |
| 28 | 40 mm nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 30 | Supplying, installation, testing and commissioning of 1HP(0.75 KW) Centrifugal Monobloc water pump set, 50x50 suction and delivery in the existing inlet and outlet line equivalent to Havells make centrifugal monoblocpump- CM Series Cat No. MHPSCB1x100 Model No. CMQ10 or its equivalent to BIS/ISI standard as required. |
AI Tender Summary
Tender Timeline
Sep 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender