Tender For Interior, & Furnishing Work For Sbi Madipur At New Delhi FLOORING / DADO The rates shall include additional cost for extra thickness of fixing material if required, for maintaining proper floor level and the cost of removing of all debris and disposing it away from the premises from all floors to Ground floor and stacking or disposing malba from ground floor as required, cleaning the site, making good the damage if any etc. Item also includes covering of laid tiles and stones with 2 width roll 275 GSM Grey colour Polypropolene sheets with self adhesive tapes and removing after completion of work, to the satisfaction of EIC. CARPET FLOORING Item includes levelling of floor and also providing an foam underlay of 3-4 MM thickness better acoustic insulation properly pasted to subfloor, also carpet edge wooden beadings near openings and partitions/ walls skirting. a Providing Printed Nylon Carpet Tiles 600 mm x 600mm Carpet Tiles or 250 mm x 900 mm or as per Manufacturer Specification Carpet Planks having density 5500 - 6000 gm / m2 , Carpet tile Printed Nylon type-6 construction face + PET Yarn Tiles carpet tile with fiber glass polyvinyl chloride backing. The rate shall be inclusive for Comfolene, GermiShield, Markproof, ActiBack, Stainarmour, Nurturefeet, Microbefresh, moist proof and the likes with a total thickness of 5.5 to 6.5 mm or as manufacturer’s specification. Carpet tiles shall be complied with Flammability Test ASTM E648 , Methenamine Pill Test ASTM D2859, Smoke Density Test ASTM E662, Appearance Retention Hexapod test ASTM D5252. The laying work should be carried out by the authorized installer of the Company in India. Manufactures should have LEED Gold Rating Certificate. Made in India with 10 Year Warranty. All certificates are to be provided before the release or award of contract. MAKESWELSPUN, FRANCO, BELGOTEX, INTERFACE, MILLIKEN i Area tuffeted weight 18-19 OZ/ Yd2 Base rate of 250-270/ SFT Sq.Mt 8 ii same as above carpet tiles with density 7000- 8000gm / m2 tuffeted weight 24 OZ/ Yd2 Base rate of 300-350/ SFT. Sq.Mt. 10 2 Providing and fixing in position Full Height Partition 50X50X1.5 mm thick Anodised Aluminium tube frame ( MAKE: JINDAL, BALCO, HINDALCO, INDAL ) for partitions @ 600 x 600 mm c/c both ways and additionally at openings or ends as required including joining the sections by Aluminium angle cleats, fixing the frames to wall, floor & ceiling with suitable aluminium angles and fastening with steel screws etc. all complete as per Architectural drawings, specifications and directions of EIC. Framework of 600 X 600 mm grid (horizontally and vertically) comprising of 50 mm X 50 mm heavy duty Aluminium tube corrugated of 1.5 mm minimum thickness with 12 mm thick HDHMR on both sides finished with 1 mm thick laminate on both sides in approved shade with groove pattern. Item includes provision of grooves in desired pattern, finishing the grooves with woodtech filler (asian paints/ nerolac paints) of specified shade. The rate includes provision of extra framework for skirting, niches and making cutouts for electrical switch plates, switch boxes, light fittings, making provision for laying conduits as per drawings & directions. ( Basic cost of laminate- 60 rs sqft) MAKECENTURY, GREENLAM, ARCHID OR EQUIVALENT Sq.Mt. 31.00 3 Providing and fixing in position Low Height Partition upto height of 1200 mm supported with 50X50X1.5 mm thick Anodised Aluminium tube frame (MAKE: JINDAL, BALCO, HINDALCO, INDAL) for partitions @ 600 x 600 mm c/c both ways and additionally at openings or ends as required including joining the sections by Aluminium angle cleats, fixing the frames to wall, floor & ceiling with suitable aluminium angles and fastening with steel screws etc. all complete as per Architectural drawings, specifications and directions of EIC. Framework of 600 X 600 mm grid (horizontally and vertically) comprising of 50 mm X 50 mm heavy duty Aluminium tube corrugated of 1.5 mm minimum thickness with 12 mm thick HDHMR on both sides finished with 1 mm thick laminate on both sides in approved shade with groove pattern. Item includes provision of grooves in desired pattern, finishing the grooves with woodtech filler (asian paints/ nerolac paints) of specified shade. The rate includes provision of extra framework for skirting, niches and making cutouts for electrical switch plates, switch boxes, light fittings, making provision for laying conduits as per drawings & directions. ( Basic cost of laminate- 60 rs sqft) MAKE- CENTURY, GREENLAM, ARCHID OR EQUIVALENT) Sq.Mt. 9.00 4 Providing and fixing full glazed glass partition including door with 12 mm thick Toughened Glass fixed to the floor / wall / flase ceiling / partition / panelling with patch fittings moving on double action hydraulic heavy duty floor spring (Hettich/Ozone/Dorma) and pivot on top. The glass is to be machine cut & the surface polished, floor spring to be properly embedded inside the floor spring after cutting and making good the floor and finally covering with Stainless Steel cover plate, The doors are to be provided with Lock fitted to the glass, 600 mm long & 25 mm dia Stainless Steel door handles along with all associated patch fittings (Hettich/Dorma/Godrej) Measurement of height shall be taken from finished floor level up to the finished glass surface. In case of varying heights on either side of partition, average height shall be considered. Measurement shall be taken of the visible front surface (elevation - 2D surface) only. Glass shall be fixed in 2 parts where ever single piece glass is not avaialble with all fixing accessories with no extra cost i Fixed Glass Partition Sq.Mt. 19.00 ii Frameless Door Sq.Mt. 6.00 BOQ FOR INTERIOR FURNISHING WORKS AT MADIPUR, NEW DELHI R
